| /* |
| Copyright 2010 Google Inc. |
| |
| Licensed under the Apache License, Version 2.0 (the "License"); |
| you may not use this file except in compliance with the License. |
| You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| */ |
| |
| |
| #ifndef GrGpu_DEFINED |
| #define GrGpu_DEFINED |
| |
| #include "GrRect.h" |
| #include "GrRefCnt.h" |
| #include "GrDrawTarget.h" |
| #include "GrGpuVertex.h" |
| #include "GrTexture.h" |
| #include "GrMemory.h" |
| |
| |
| class GrGpu : public GrDrawTarget { |
| |
| public: |
| /** |
| * Possible 3D APIs that may be used by Ganesh. |
| */ |
| enum Engine { |
| kOpenGL_Shaders_Engine, |
| kOpenGL_Fixed_Engine, |
| kDirect3D9_Engine |
| }; |
| |
| /** |
| * Platform specific 3D context. |
| * For |
| * kOpenGL_Shaders_Engine use NULL |
| * kOpenGL_Fixed_Engine use NULL |
| * kDirect3D9_Engine use an IDirect3DDevice9* |
| */ |
| typedef void* Platform3DContext; |
| |
| /** |
| * Create an instance of GrGpu that matches the specified Engine backend. |
| * If the requested engine is not supported (at compile-time or run-time) |
| * this returns NULL. |
| */ |
| static GrGpu* Create(Engine, Platform3DContext context3D); |
| |
| /** |
| * Describes levels of support for non-power-of-two textures. |
| */ |
| enum NPOTTextureTypes { |
| /** |
| * no support for NPOT textures |
| */ |
| kNone_NPOTTextureType, |
| /** |
| * only clamp is supported for textures |
| */ |
| kNoRepeat_NPOTTextureType, |
| /** |
| * no texture restrictions at all, but rendertargets must be POW2 |
| */ |
| kNonRendertarget_NPOTTextureType, |
| /** |
| * no POW2 restrictions at all |
| */ |
| kFull_NPOTTextureType |
| }; |
| |
| /** |
| * Used to control the level of antialiasing available for a rendertarget. |
| * Anti-alias quality levels depend on the underlying API/GPU capabilities. |
| */ |
| enum AALevels { |
| kNone_AALevel, //<! No antialiasing available. |
| kLow_AALevel, //<! Low quality antialiased rendering. Actual |
| // interpretation is platform-dependent. |
| kMed_AALevel, //<! Medium quality antialiased rendering. Actual |
| // interpretation is platform-dependent. |
| kHigh_AALevel, //<! High quality antialiased rendering. Actual |
| // interpretation is platform-dependent. |
| }; |
| |
| |
| /** |
| * Optional bitfield flags that can be passed to createTexture. |
| */ |
| enum TextureFlags { |
| kRenderTarget_TextureFlag = 0x1, //<! Creates a texture that can be |
| // rendered to by calling |
| // GrGpu::setRenderTarget() with |
| // GrTexture::asRenderTarget(). |
| kNoPathRendering_TextureFlag = 0x2, //<! If the texture is used as a |
| // rendertarget but paths will not |
| // be rendered to it. |
| kDynamicUpdate_TextureFlag = 0x4 //!< Hint that the CPU may modify |
| // this texture after creation |
| }; |
| |
| enum { |
| /** |
| * For Index8 pixel config, the colortable must be 256 entries |
| */ |
| kColorTableSize = 256 * sizeof(GrColor) |
| }; |
| /** |
| * Describes a texture to be created. |
| */ |
| struct TextureDesc { |
| uint32_t fFlags; //!< bitfield of TextureFlags |
| GrGpu::AALevels fAALevel;//!< The level of antialiasing available |
| // for a rendertarget texture. Only |
| // flags contains |
| // kRenderTarget_TextureFlag. |
| uint32_t fWidth; //!< Width of the texture |
| uint32_t fHeight; //!< Height of the texture |
| GrTexture::PixelConfig fFormat; //!< Format of source data of the |
| // texture. Not guaraunteed to be the |
| // same as internal format used by |
| // 3D API. |
| }; |
| |
| /** |
| * Gpu usage statistics. |
| */ |
| struct Stats { |
| uint32_t fVertexCnt; //<! Number of vertices drawn |
| uint32_t fIndexCnt; //<! Number of indices drawn |
| uint32_t fDrawCnt; //<! Number of draws |
| |
| uint32_t fProgChngCnt;//<! Number of program changes (N/A for fixed) |
| |
| /* |
| * Number of times the texture is set in 3D API |
| */ |
| uint32_t fTextureChngCnt; |
| /* |
| * Number of times the render target is set in 3D API |
| */ |
| uint32_t fRenderTargetChngCnt; |
| /* |
| * Number of textures created (includes textures that are rendertargets). |
| */ |
| uint32_t fTextureCreateCnt; |
| /* |
| * Number of rendertargets created. |
| */ |
| uint32_t fRenderTargetCreateCnt; |
| }; |
| |
| //////////////////////////////////////////////////////////////////////////// |
| |
| GrGpu(); |
| virtual ~GrGpu(); |
| |
| /** |
| * The GrGpu object normally assumes that no outsider is setting state |
| * within the underlying 3D API's context/device/whatever. This call informs |
| * the GrGpu that the state was modified and it should resend. Shouldn't |
| * be called frequently for good performance. |
| */ |
| virtual void resetContext(); |
| |
| void unimpl(const char[]); |
| |
| /** |
| * Creates a texture object |
| * |
| * @param desc describes the texture to be created. |
| * @param srcData texel data to load texture. Begins with full-size |
| * palette data for paletted textures. Contains width* |
| * height texels. If NULL texture data is uninitialized. |
| * |
| * @return The texture object if successful, otherwise NULL. |
| */ |
| virtual GrTexture* createTexture(const TextureDesc& desc, |
| const void* srcData, size_t rowBytes) = 0; |
| /** |
| * Wraps an externally-created rendertarget in a GrRenderTarget. |
| * @param platformRenderTarget handle to the the render target in the |
| * underlying 3D API. Interpretation depends on |
| * GrGpu subclass in use. |
| * @param width width of the render target |
| * @param height height of the render target |
| */ |
| virtual GrRenderTarget* createPlatformRenderTarget( |
| intptr_t platformRenderTarget, |
| int width, int height) = 0; |
| |
| /** |
| * Creates a vertex buffer. |
| * |
| * @param size size in bytes of the vertex buffer |
| * @param dynamic hints whether the data will be frequently changed |
| * by either GrVertexBuffer::lock or |
| * GrVertexBuffer::updateData. |
| * |
| * @return The vertex buffer if successful, otherwise NULL. |
| */ |
| virtual GrVertexBuffer* createVertexBuffer(uint32_t size, bool dynamic) = 0; |
| |
| /** |
| * Creates an index buffer. |
| * |
| * @param size size in bytes of the index buffer |
| * @param dynamic hints whether the data will be frequently changed |
| * by either GrIndexBuffer::lock or |
| * GrIndexBuffer::updateData. |
| * |
| * @return The index buffer if successful, otherwise NULL. |
| */ |
| virtual GrIndexBuffer* createIndexBuffer(uint32_t size, bool dynamic) = 0; |
| |
| /** |
| * Gets the default render target. This is the render target set in the |
| * 3D API at the time the GrGpu was created. |
| */ |
| virtual GrRenderTarget* defaultRenderTarget() = 0; |
| |
| /** |
| * At construction time the GrGpu infers the render target and viewport from |
| * the state of the underlying 3D API. However, a platform-specific resize |
| * event may occur. |
| * @param width new width of the default rendertarget |
| * @param height new height of the default rendertarget |
| */ |
| virtual void setDefaultRenderTargetSize(uint32_t width, uint32_t height) = 0; |
| |
| /** |
| * Erase the entire render target, ignoring any clips/scissors. |
| * |
| * This is issued to the GPU driver immediately. |
| */ |
| virtual void eraseColor(GrColor color) = 0; |
| |
| /** |
| * Are 8 bit paletted textures supported. |
| * |
| * @return true if 8bit palette textures are supported, false otherwise |
| */ |
| bool supports8BitPalette() const { return f8bitPaletteSupport; } |
| |
| /** |
| * If single stencil pass winding is supported then one stencil pass |
| * (kWindingStencil1_PathPass) is required to do winding rule path filling |
| * (or inverse winding rule). Otherwise, two passes are required |
| * (kWindingStencil1_PathPass followed by kWindingStencil2_PathPass). |
| * |
| * @return true if only a single stencil pass is needed. |
| */ |
| bool supportsSingleStencilPassWinding() const |
| { return fSingleStencilPassForWinding; } |
| |
| /** |
| * Checks whether locking vertex and index buffers is supported. |
| * |
| * @return true if locking is supported. |
| */ |
| bool supportsBufferLocking() const { return fBufferLockSupport; } |
| |
| /** |
| * Gets the minimum width of a render target. If a texture/rt is created |
| * with a width less than this size the GrGpu object will clamp it to this |
| * value. |
| */ |
| int minRenderTargetWidth() const { return fMinRenderTargetWidth; } |
| |
| /** |
| * Gets the minimum width of a render target. If a texture/rt is created |
| * with a height less than this size the GrGpu object will clamp it to this |
| * value. |
| */ |
| int minRenderTargetHeight() const { return fMinRenderTargetHeight; } |
| |
| /** |
| * Retrieves the level of NPOT texture support. Regardless of support level |
| * NPOT textures can always be created, but internally they may be imbedded |
| * in a POT texture. An exception is paletted textures which must be |
| * specified as a POT when npotTextureSupport() is not Full. |
| * |
| * @return the level of NPOT texture support. |
| */ |
| NPOTTextureTypes npotTextureSupport() const { return fNPOTTextureSupport; } |
| |
| // GrDrawTarget overrides |
| virtual void drawIndexed(PrimitiveType type, |
| uint32_t startVertex, |
| uint32_t startIndex, |
| uint32_t vertexCount, |
| uint32_t indexCount); |
| |
| virtual void drawNonIndexed(PrimitiveType type, |
| uint32_t startVertex, |
| uint32_t vertexCount); |
| |
| /** |
| * Determines if blend is effectively disabled. |
| * |
| * @return true if blend can be disabled without changing the rendering |
| * result given the current state including the vertex layout specified |
| * with the vertex source. |
| */ |
| bool canDisableBlend() const; |
| |
| /** |
| * Returns an index buffer that can be used to render quads. |
| * Indices are 0, 1, 2, 0, 2, 3, etc. |
| * Draw with kTriangles_PrimitiveType |
| */ |
| const GrIndexBuffer* quadIndexBuffer() const; |
| /** |
| * Gets the number of quads that can be rendered using quadIndexBuffer. |
| */ |
| int maxQuadsInIndexBuffer() const; |
| |
| /** |
| * Ensures that the current render target is actually set in the |
| * underlying 3D API. Used when client wants to use 3D API to directly |
| * render to the RT. |
| */ |
| virtual void forceRenderTargetFlush() = 0; |
| |
| virtual bool readPixels(int left, int top, int width, int height, |
| GrTexture::PixelConfig, void* buffer) = 0; |
| |
| |
| const Stats& getStats() const; |
| void resetStats(); |
| void printStats() const; |
| |
| protected: |
| /** |
| * Extensions to GrDrawTarget::StencilPass to implement stencil clipping |
| */ |
| enum GpuStencilPass { |
| kSetClip_StencilPass = kDrawTargetCount_StencilPass, |
| /* rendering a hard clip to the stencil |
| buffer. Subsequent draws with other |
| StencilPass values will be clipped |
| if kStencilClip_StateBit is set. */ |
| kGpuCount_StencilPass |
| }; |
| |
| /** |
| * Extensions to GrDrawTarget::StateBits to implement stencil clipping |
| */ |
| struct ClipState { |
| bool fClipInStencil; |
| bool fClipIsDirty; |
| GrRenderTarget* fStencilClipTarget; |
| } fClipState; |
| |
| virtual void clipWillChange(const GrClip& clip); |
| bool setupClipAndFlushState(PrimitiveType type); |
| |
| struct BoundsState { |
| bool fScissorEnabled; |
| GrIRect fScissorRect; |
| GrIRect fViewportRect; |
| }; |
| |
| // defaults to false, subclass can set true to support palleted textures |
| bool f8bitPaletteSupport; |
| |
| // defaults to false, subclass can set higher support level |
| NPOTTextureTypes fNPOTTextureSupport; |
| |
| // True if only one stencil pass is required to implement the winding path |
| // fill rule. Subclass responsible for setting this value. |
| bool fSingleStencilPassForWinding; |
| |
| // set by subclass to true if index and vertex buffers can be locked, false |
| // otherwise. |
| bool fBufferLockSupport; |
| |
| // set by subclass |
| int fMinRenderTargetWidth; |
| int fMinRenderTargetHeight; |
| |
| // overridden by API specific GrGpu-derived class to perform the draw call. |
| virtual void drawIndexedHelper(PrimitiveType type, |
| uint32_t startVertex, |
| uint32_t startIndex, |
| uint32_t vertexCount, |
| uint32_t indexCount) = 0; |
| |
| virtual void drawNonIndexedHelper(PrimitiveType type, |
| uint32_t vertexCount, |
| uint32_t numVertices) = 0; |
| |
| // called to program the vertex data, indexCount will be 0 if drawing non- |
| // indexed geometry. |
| virtual void setupGeometry(uint32_t startVertex, |
| uint32_t startIndex, |
| uint32_t vertexCount, |
| uint32_t indexCount) = 0; |
| |
| |
| // The GrGpu typically records the clients requested state and then flushes |
| // deltas from previous state at draw time. This function does the |
| // API-specific flush of the state |
| // returns false if current state is unsupported. |
| virtual bool flushGraphicsState(PrimitiveType type) = 0; |
| |
| // Sets the scissor rect, or disables if rect is NULL. |
| virtual void flushScissor(const GrIRect* rect) = 0; |
| |
| // GrGpu subclass removes the clip from the stencil buffer |
| virtual void eraseStencilClip() = 0; |
| |
| // GrDrawTarget overrides |
| virtual bool acquireGeometryHelper(GrVertexLayout vertexLayout, |
| void** vertices, |
| void** indices); |
| virtual void releaseGeometryHelper(); |
| |
| private: |
| mutable GrIndexBuffer* fQuadIndexBuffer; // mutable so it can be |
| // created on-demand |
| |
| static const int MAX_VERTEX_SIZE = GR_CT_MAX(2*sizeof(GrPoint) + sizeof(GrColor), |
| 2*sizeof(GrGpuTextVertex)); |
| static const int VERTEX_STORAGE = 16 * MAX_VERTEX_SIZE; |
| static const int INDEX_STORAGE = 32 * sizeof(uint16_t); |
| |
| protected: |
| GrAutoSMalloc<VERTEX_STORAGE> fVertices; |
| GrAutoSMalloc<INDEX_STORAGE> fIndices; |
| |
| Stats fStats; |
| |
| private: |
| typedef GrRefCnt INHERITED; |
| }; |
| |
| #endif |
| |