| /* |
| * Copyright 2012 Google Inc. |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #ifndef PictureRenderer_DEFINED |
| #define PictureRenderer_DEFINED |
| |
| #include "SkCanvas.h" |
| #include "SkCountdown.h" |
| #include "SkDrawFilter.h" |
| #include "SkMath.h" |
| #include "SkPaint.h" |
| #include "SkPicture.h" |
| #include "SkRect.h" |
| #include "SkRefCnt.h" |
| #include "SkRunnable.h" |
| #include "SkString.h" |
| #include "SkTDArray.h" |
| #include "SkThreadPool.h" |
| #include "SkTileGridPicture.h" |
| #include "SkTypes.h" |
| |
| #if SK_SUPPORT_GPU |
| #include "GrContextFactory.h" |
| #include "GrContext.h" |
| #endif |
| |
| class SkBitmap; |
| class SkCanvas; |
| class SkGLContextHelper; |
| class SkThread; |
| |
| namespace sk_tools { |
| |
| class TiledPictureRenderer; |
| |
| class PictureRenderer : public SkRefCnt { |
| |
| public: |
| enum SkDeviceTypes { |
| #if SK_ANGLE |
| kAngle_DeviceType, |
| #endif |
| kBitmap_DeviceType, |
| #if SK_SUPPORT_GPU |
| kGPU_DeviceType, |
| #endif |
| }; |
| |
| enum BBoxHierarchyType { |
| kNone_BBoxHierarchyType = 0, |
| kRTree_BBoxHierarchyType, |
| kTileGrid_BBoxHierarchyType, |
| }; |
| |
| // this uses SkPaint::Flags as a base and adds additional flags |
| enum DrawFilterFlags { |
| kNone_DrawFilterFlag = 0, |
| kHinting_DrawFilterFlag = 0x10000, // toggles between no hinting and normal hinting |
| kSlightHinting_DrawFilterFlag = 0x20000, // toggles between slight and normal hinting |
| kAAClip_DrawFilterFlag = 0x40000, // toggles between soft and hard clip |
| kMaskFilter_DrawFilterFlag = 0x80000, // toggles on/off mask filters (e.g., blurs) |
| }; |
| |
| SK_COMPILE_ASSERT(!(kMaskFilter_DrawFilterFlag & SkPaint::kAllFlags), maskfilter_flag_must_be_greater); |
| SK_COMPILE_ASSERT(!(kHinting_DrawFilterFlag & SkPaint::kAllFlags), |
| hinting_flag_must_be_greater); |
| SK_COMPILE_ASSERT(!(kSlightHinting_DrawFilterFlag & SkPaint::kAllFlags), |
| slight_hinting_flag_must_be_greater); |
| |
| /** |
| * Called with each new SkPicture to render. |
| */ |
| virtual void init(SkPicture* pict); |
| |
| /** |
| * Set the viewport so that only the portion listed gets drawn. |
| */ |
| void setViewport(SkISize size) { fViewport = size; } |
| |
| /** |
| * Set the scale factor at which draw the picture. |
| */ |
| void setScaleFactor(SkScalar scale) { fScaleFactor = scale; } |
| |
| /** |
| * Perform any setup that should done prior to each iteration of render() which should not be |
| * timed. |
| */ |
| virtual void setup() {} |
| |
| /** |
| * Perform work that is to be timed. Typically this is rendering, but is also used for recording |
| * and preparing picture for playback by the subclasses which do those. |
| * If path is non-null, subclass implementations should call write(). |
| * @param path If non-null, also write the output to the file specified by path. path should |
| * have no extension; it will be added by write(). |
| * @return bool True if rendering succeeded and, if path is non-null, the output was |
| * successfully written to a file. |
| */ |
| virtual bool render(const SkString* path, SkBitmap** out = NULL) = 0; |
| |
| /** |
| * Called once finished with a particular SkPicture, before calling init again, and before |
| * being done with this Renderer. |
| */ |
| virtual void end(); |
| |
| /** |
| * If this PictureRenderer is actually a TiledPictureRender, return a pointer to this as a |
| * TiledPictureRender so its methods can be called. |
| */ |
| virtual TiledPictureRenderer* getTiledRenderer() { return NULL; } |
| |
| /** |
| * Resets the GPU's state. Does nothing if the backing is raster. For a GPU renderer, calls |
| * flush, and calls finish if callFinish is true. |
| * @param callFinish Whether to call finish. |
| */ |
| void resetState(bool callFinish); |
| |
| /** |
| * Set the backend type. Returns true on success and false on failure. |
| */ |
| bool setDeviceType(SkDeviceTypes deviceType) { |
| fDeviceType = deviceType; |
| #if SK_SUPPORT_GPU |
| // In case this function is called more than once |
| SkSafeUnref(fGrContext); |
| fGrContext = NULL; |
| // Set to Native so it will have an initial value. |
| GrContextFactory::GLContextType glContextType = GrContextFactory::kNative_GLContextType; |
| #endif |
| switch(deviceType) { |
| case kBitmap_DeviceType: |
| return true; |
| #if SK_SUPPORT_GPU |
| case kGPU_DeviceType: |
| // Already set to GrContextFactory::kNative_GLContextType, above. |
| break; |
| #if SK_ANGLE |
| case kAngle_DeviceType: |
| glContextType = GrContextFactory::kANGLE_GLContextType; |
| break; |
| #endif |
| #endif |
| default: |
| // Invalid device type. |
| return false; |
| } |
| #if SK_SUPPORT_GPU |
| fGrContext = fGrContextFactory.get(glContextType); |
| if (NULL == fGrContext) { |
| return false; |
| } else { |
| fGrContext->ref(); |
| return true; |
| } |
| #endif |
| } |
| |
| #if SK_SUPPORT_GPU |
| void setSampleCount(int sampleCount) { |
| fSampleCount = sampleCount; |
| } |
| #endif |
| |
| void setDrawFilters(DrawFilterFlags const * const filters, const SkString& configName) { |
| memcpy(fDrawFilters, filters, sizeof(fDrawFilters)); |
| fDrawFiltersConfig = configName; |
| } |
| |
| void setBBoxHierarchyType(BBoxHierarchyType bbhType) { |
| fBBoxHierarchyType = bbhType; |
| } |
| |
| BBoxHierarchyType getBBoxHierarchyType() { return fBBoxHierarchyType; } |
| |
| void setGridSize(int width, int height) { |
| fGridInfo.fTileInterval.set(width, height); |
| } |
| |
| bool isUsingBitmapDevice() { |
| return kBitmap_DeviceType == fDeviceType; |
| } |
| |
| virtual SkString getPerIterTimeFormat() { return SkString("%.2f"); } |
| |
| virtual SkString getNormalTimeFormat() { return SkString("%6.2f"); } |
| |
| /** |
| * Reports the configuration of this PictureRenderer. |
| */ |
| SkString getConfigName() { |
| SkString config = this->getConfigNameInternal(); |
| if (!fViewport.isEmpty()) { |
| config.appendf("_viewport_%ix%i", fViewport.width(), fViewport.height()); |
| } |
| if (kRTree_BBoxHierarchyType == fBBoxHierarchyType) { |
| config.append("_rtree"); |
| } else if (kTileGrid_BBoxHierarchyType == fBBoxHierarchyType) { |
| config.append("_grid"); |
| } |
| #if SK_SUPPORT_GPU |
| switch (fDeviceType) { |
| case kGPU_DeviceType: |
| if (fSampleCount) { |
| config.appendf("_msaa%d", fSampleCount); |
| } else { |
| config.append("_gpu"); |
| } |
| break; |
| #if SK_ANGLE |
| case kAngle_DeviceType: |
| config.append("_angle"); |
| break; |
| #endif |
| default: |
| // Assume that no extra info means bitmap. |
| break; |
| } |
| #endif |
| config.append(fDrawFiltersConfig.c_str()); |
| return config; |
| } |
| |
| #if SK_SUPPORT_GPU |
| bool isUsingGpuDevice() { |
| switch (fDeviceType) { |
| case kGPU_DeviceType: |
| // fall through |
| #if SK_ANGLE |
| case kAngle_DeviceType: |
| #endif |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| SkGLContextHelper* getGLContext() { |
| GrContextFactory::GLContextType glContextType |
| = GrContextFactory::kNull_GLContextType; |
| switch(fDeviceType) { |
| case kGPU_DeviceType: |
| glContextType = GrContextFactory::kNative_GLContextType; |
| break; |
| #if SK_ANGLE |
| case kAngle_DeviceType: |
| glContextType = GrContextFactory::kANGLE_GLContextType; |
| break; |
| #endif |
| default: |
| return NULL; |
| } |
| return fGrContextFactory.getGLContext(glContextType); |
| } |
| |
| GrContext* getGrContext() { |
| return fGrContext; |
| } |
| #endif |
| |
| PictureRenderer() |
| : fPicture(NULL) |
| , fDeviceType(kBitmap_DeviceType) |
| , fBBoxHierarchyType(kNone_BBoxHierarchyType) |
| , fScaleFactor(SK_Scalar1) |
| #if SK_SUPPORT_GPU |
| , fGrContext(NULL) |
| , fSampleCount(0) |
| #endif |
| { |
| fGridInfo.fMargin.setEmpty(); |
| fGridInfo.fOffset.setZero(); |
| fGridInfo.fTileInterval.set(1, 1); |
| sk_bzero(fDrawFilters, sizeof(fDrawFilters)); |
| fViewport.set(0, 0); |
| } |
| |
| #if SK_SUPPORT_GPU |
| virtual ~PictureRenderer() { |
| SkSafeUnref(fGrContext); |
| } |
| #endif |
| |
| protected: |
| SkAutoTUnref<SkCanvas> fCanvas; |
| SkPicture* fPicture; |
| SkDeviceTypes fDeviceType; |
| BBoxHierarchyType fBBoxHierarchyType; |
| DrawFilterFlags fDrawFilters[SkDrawFilter::kTypeCount]; |
| SkString fDrawFiltersConfig; |
| SkTileGridPicture::TileGridInfo fGridInfo; // used when fBBoxHierarchyType is TileGrid |
| |
| void buildBBoxHierarchy(); |
| |
| /** |
| * Return the total width that should be drawn. If the viewport width has been set greater than |
| * 0, this will be the minimum of the current SkPicture's width and the viewport's width. |
| */ |
| int getViewWidth(); |
| |
| /** |
| * Return the total height that should be drawn. If the viewport height has been set greater |
| * than 0, this will be the minimum of the current SkPicture's height and the viewport's height. |
| */ |
| int getViewHeight(); |
| |
| /** |
| * Scales the provided canvas to the scale factor set by setScaleFactor. |
| */ |
| void scaleToScaleFactor(SkCanvas*); |
| |
| SkPicture* createPicture(); |
| uint32_t recordFlags(); |
| SkCanvas* setupCanvas(); |
| virtual SkCanvas* setupCanvas(int width, int height); |
| |
| private: |
| SkISize fViewport; |
| SkScalar fScaleFactor; |
| #if SK_SUPPORT_GPU |
| GrContextFactory fGrContextFactory; |
| GrContext* fGrContext; |
| int fSampleCount; |
| #endif |
| |
| virtual SkString getConfigNameInternal() = 0; |
| |
| typedef SkRefCnt INHERITED; |
| }; |
| |
| /** |
| * This class does not do any rendering, but its render function executes recording, which we want |
| * to time. |
| */ |
| class RecordPictureRenderer : public PictureRenderer { |
| virtual bool render(const SkString*, SkBitmap** out = NULL) SK_OVERRIDE; |
| |
| virtual SkString getPerIterTimeFormat() SK_OVERRIDE { return SkString("%.4f"); } |
| |
| virtual SkString getNormalTimeFormat() SK_OVERRIDE { return SkString("%6.4f"); } |
| |
| protected: |
| virtual SkCanvas* setupCanvas(int width, int height) SK_OVERRIDE; |
| |
| private: |
| virtual SkString getConfigNameInternal() SK_OVERRIDE; |
| }; |
| |
| class PipePictureRenderer : public PictureRenderer { |
| public: |
| virtual bool render(const SkString*, SkBitmap** out = NULL) SK_OVERRIDE; |
| |
| private: |
| virtual SkString getConfigNameInternal() SK_OVERRIDE; |
| |
| typedef PictureRenderer INHERITED; |
| }; |
| |
| class SimplePictureRenderer : public PictureRenderer { |
| public: |
| virtual void init(SkPicture* pict) SK_OVERRIDE; |
| |
| virtual bool render(const SkString*, SkBitmap** out = NULL) SK_OVERRIDE; |
| |
| private: |
| virtual SkString getConfigNameInternal() SK_OVERRIDE; |
| |
| typedef PictureRenderer INHERITED; |
| }; |
| |
| class TiledPictureRenderer : public PictureRenderer { |
| public: |
| TiledPictureRenderer(); |
| |
| virtual void init(SkPicture* pict) SK_OVERRIDE; |
| |
| /** |
| * Renders to tiles, rather than a single canvas. If a path is provided, a separate file is |
| * created for each tile, named "path0.png", "path1.png", etc. |
| * Multithreaded mode currently does not support writing to a file. |
| */ |
| virtual bool render(const SkString* path, SkBitmap** out = NULL) SK_OVERRIDE; |
| |
| virtual void end() SK_OVERRIDE; |
| |
| void setTileWidth(int width) { |
| fTileWidth = width; |
| } |
| |
| int getTileWidth() const { |
| return fTileWidth; |
| } |
| |
| void setTileHeight(int height) { |
| fTileHeight = height; |
| } |
| |
| int getTileHeight() const { |
| return fTileHeight; |
| } |
| |
| void setTileWidthPercentage(double percentage) { |
| fTileWidthPercentage = percentage; |
| } |
| |
| double getTileWidthPercentage() const { |
| return fTileWidthPercentage; |
| } |
| |
| void setTileHeightPercentage(double percentage) { |
| fTileHeightPercentage = percentage; |
| } |
| |
| double getTileHeightPercentage() const { |
| return fTileHeightPercentage; |
| } |
| |
| void setTileMinPowerOf2Width(int width) { |
| SkASSERT(SkIsPow2(width) && width > 0); |
| if (!SkIsPow2(width) || width <= 0) { |
| return; |
| } |
| |
| fTileMinPowerOf2Width = width; |
| } |
| |
| int getTileMinPowerOf2Width() const { |
| return fTileMinPowerOf2Width; |
| } |
| |
| virtual TiledPictureRenderer* getTiledRenderer() SK_OVERRIDE { return this; } |
| |
| virtual bool supportsTimingIndividualTiles() { return true; } |
| |
| /** |
| * Report the number of tiles in the x and y directions. Must not be called before init. |
| * @param x Output parameter identifying the number of tiles in the x direction. |
| * @param y Output parameter identifying the number of tiles in the y direction. |
| * @return True if the tiles have been set up, and x and y are meaningful. If false, x and y are |
| * unmodified. |
| */ |
| bool tileDimensions(int& x, int&y); |
| |
| /** |
| * Move to the next tile and return its indices. Must be called before calling drawCurrentTile |
| * for the first time. |
| * @param i Output parameter identifying the column of the next tile to be drawn on the next |
| * call to drawNextTile. |
| * @param j Output parameter identifying the row of the next tile to be drawn on the next call |
| * to drawNextTile. |
| * @param True if the tiles have been created and the next tile to be drawn by drawCurrentTile |
| * is within the range of tiles. If false, i and j are unmodified. |
| */ |
| bool nextTile(int& i, int& j); |
| |
| /** |
| * Render one tile. This will draw the same tile each time it is called until nextTile is |
| * called. The tile rendered will depend on how many calls have been made to nextTile. |
| * It is an error to call this without first calling nextTile, or if nextTile returns false. |
| */ |
| void drawCurrentTile(); |
| |
| protected: |
| SkTDArray<SkRect> fTileRects; |
| |
| virtual SkCanvas* setupCanvas(int width, int height) SK_OVERRIDE; |
| virtual SkString getConfigNameInternal() SK_OVERRIDE; |
| |
| private: |
| int fTileWidth; |
| int fTileHeight; |
| double fTileWidthPercentage; |
| double fTileHeightPercentage; |
| int fTileMinPowerOf2Width; |
| |
| // These variables are only used for timing individual tiles. |
| // Next tile to draw in fTileRects. |
| int fCurrentTileOffset; |
| // Number of tiles in the x direction. |
| int fTilesX; |
| // Number of tiles in the y direction. |
| int fTilesY; |
| |
| void setupTiles(); |
| void setupPowerOf2Tiles(); |
| |
| typedef PictureRenderer INHERITED; |
| }; |
| |
| class CloneData; |
| |
| class MultiCorePictureRenderer : public TiledPictureRenderer { |
| public: |
| explicit MultiCorePictureRenderer(int threadCount); |
| |
| ~MultiCorePictureRenderer(); |
| |
| virtual void init(SkPicture* pict) SK_OVERRIDE; |
| |
| /** |
| * Behaves like TiledPictureRenderer::render(), only using multiple threads. |
| */ |
| virtual bool render(const SkString* path, SkBitmap** out = NULL) SK_OVERRIDE; |
| |
| virtual void end() SK_OVERRIDE; |
| |
| virtual bool supportsTimingIndividualTiles() SK_OVERRIDE { return false; } |
| |
| private: |
| virtual SkString getConfigNameInternal() SK_OVERRIDE; |
| |
| const int fNumThreads; |
| SkTDArray<SkCanvas*> fCanvasPool; |
| SkThreadPool fThreadPool; |
| SkPicture* fPictureClones; |
| CloneData** fCloneData; |
| SkCountdown fCountdown; |
| |
| typedef TiledPictureRenderer INHERITED; |
| }; |
| |
| /** |
| * This class does not do any rendering, but its render function executes turning an SkPictureRecord |
| * into an SkPicturePlayback, which we want to time. |
| */ |
| class PlaybackCreationRenderer : public PictureRenderer { |
| public: |
| virtual void setup() SK_OVERRIDE; |
| |
| virtual bool render(const SkString*, SkBitmap** out = NULL) SK_OVERRIDE; |
| |
| virtual SkString getPerIterTimeFormat() SK_OVERRIDE { return SkString("%.4f"); } |
| |
| virtual SkString getNormalTimeFormat() SK_OVERRIDE { return SkString("%6.4f"); } |
| |
| private: |
| SkAutoTUnref<SkPicture> fReplayer; |
| |
| virtual SkString getConfigNameInternal() SK_OVERRIDE; |
| |
| typedef PictureRenderer INHERITED; |
| }; |
| |
| extern PictureRenderer* CreateGatherPixelRefsRenderer(); |
| extern PictureRenderer* CreatePictureCloneRenderer(); |
| |
| } |
| |
| #endif // PictureRenderer_DEFINED |