| [ |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "[START_DIR]/skia/bin/fetch-gn" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "fetch-gn" |
| }, |
| { |
| "cmd": [ |
| "[START_DIR]/skia/bin/gn", |
| "gen", |
| "[START_DIR]/out/Debug", |
| "--args=extra_cflags=[\"-O1\"] ndk=\"[START_DIR]/android_ndk_linux\" target_cpu=\"None\"" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "name": "gn gen" |
| }, |
| { |
| "cmd": [ |
| "ninja", |
| "-k", |
| "0", |
| "-C", |
| "[START_DIR]/out/Debug" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "name": "ninja" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "push", |
| "file.txt", |
| "file.txt" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "push file.txt file.txt" |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "RECIPE_MODULE[recipe_engine::file]/resources/fileutil.py", |
| "--json-output", |
| "/path/to/tmp/json", |
| "rmtree", |
| "results_dir" |
| ], |
| "infra_step": true, |
| "name": "rmtree results_dir" |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "RECIPE_MODULE[recipe_engine::file]/resources/fileutil.py", |
| "--json-output", |
| "/path/to/tmp/json", |
| "ensure-directory", |
| "--mode", |
| "0777", |
| "results_dir" |
| ], |
| "infra_step": true, |
| "name": "makedirs results_dir" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "shell", |
| "rm", |
| "-rf", |
| "device_results_dir" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "rm device_results_dir" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "shell", |
| "mkdir", |
| "-p", |
| "device_results_dir" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "mkdir device_results_dir" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "shell", |
| "mkdir", |
| "-p", |
| "/sdcard/revenge_of_the_skiabot/resources" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "mkdir /sdcard/revenge_of_the_skiabot/resources" |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "\nimport os\nimport subprocess\nimport sys\nhost = sys.argv[1]\ndevice = sys.argv[2]\nfor d, _, fs in os.walk(host):\n p = os.path.relpath(d, host)\n if p != '.' and p.startswith('.'):\n continue\n for f in fs:\n print os.path.join(p,f)\n subprocess.check_call(['/usr/bin/adb.1.0.35', 'push',\n os.path.realpath(os.path.join(host, p, f)),\n os.path.join(device, p, f)])\n", |
| "[START_DIR]/skia/resources", |
| "/sdcard/revenge_of_the_skiabot/resources" |
| ], |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "push [START_DIR]/skia/resources/* /sdcard/revenge_of_the_skiabot/resources", |
| "~followup_annotations": [ |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@import os@@@", |
| "@@@STEP_LOG_LINE@python.inline@import subprocess@@@", |
| "@@@STEP_LOG_LINE@python.inline@import sys@@@", |
| "@@@STEP_LOG_LINE@python.inline@host = sys.argv[1]@@@", |
| "@@@STEP_LOG_LINE@python.inline@device = sys.argv[2]@@@", |
| "@@@STEP_LOG_LINE@python.inline@for d, _, fs in os.walk(host):@@@", |
| "@@@STEP_LOG_LINE@python.inline@ p = os.path.relpath(d, host)@@@", |
| "@@@STEP_LOG_LINE@python.inline@ if p != '.' and p.startswith('.'):@@@", |
| "@@@STEP_LOG_LINE@python.inline@ continue@@@", |
| "@@@STEP_LOG_LINE@python.inline@ for f in fs:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ print os.path.join(p,f)@@@", |
| "@@@STEP_LOG_LINE@python.inline@ subprocess.check_call(['/usr/bin/adb.1.0.35', 'push',@@@", |
| "@@@STEP_LOG_LINE@python.inline@ os.path.realpath(os.path.join(host, p, f)),@@@", |
| "@@@STEP_LOG_LINE@python.inline@ os.path.join(device, p, f)])@@@", |
| "@@@STEP_LOG_END@python.inline@@@" |
| ] |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "RECIPE_MODULE[recipe_engine::file]/resources/fileutil.py", |
| "--json-output", |
| "/path/to/tmp/json", |
| "copy", |
| "[START_DIR]/skia/infra/bots/assets/skp/VERSION", |
| "/path/to/tmp/" |
| ], |
| "infra_step": true, |
| "name": "Get downloaded SKP VERSION" |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "RECIPE_MODULE[recipe_engine::file]/resources/fileutil.py", |
| "--json-output", |
| "/path/to/tmp/json", |
| "copy", |
| "42", |
| "[START_DIR]/tmp/SKP_VERSION" |
| ], |
| "infra_step": true, |
| "name": "write SKP_VERSION" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "shell", |
| "cat", |
| "/sdcard/revenge_of_the_skiabot/SKP_VERSION" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "read /sdcard/revenge_of_the_skiabot/SKP_VERSION", |
| "stdout": "/path/to/tmp/" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "shell", |
| "rm", |
| "-f", |
| "/sdcard/revenge_of_the_skiabot/SKP_VERSION" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "rm /sdcard/revenge_of_the_skiabot/SKP_VERSION" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "shell", |
| "rm", |
| "-rf", |
| "/sdcard/revenge_of_the_skiabot/skps" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "rm /sdcard/revenge_of_the_skiabot/skps" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "shell", |
| "mkdir", |
| "-p", |
| "/sdcard/revenge_of_the_skiabot/skps" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "mkdir /sdcard/revenge_of_the_skiabot/skps" |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "\nimport os\nimport subprocess\nimport sys\nhost = sys.argv[1]\ndevice = sys.argv[2]\nfor d, _, fs in os.walk(host):\n p = os.path.relpath(d, host)\n if p != '.' and p.startswith('.'):\n continue\n for f in fs:\n print os.path.join(p,f)\n subprocess.check_call(['/usr/bin/adb.1.0.35', 'push',\n os.path.realpath(os.path.join(host, p, f)),\n os.path.join(device, p, f)])\n", |
| "[START_DIR]/skp", |
| "/sdcard/revenge_of_the_skiabot/skps" |
| ], |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "push [START_DIR]/skp/* /sdcard/revenge_of_the_skiabot/skps", |
| "~followup_annotations": [ |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@import os@@@", |
| "@@@STEP_LOG_LINE@python.inline@import subprocess@@@", |
| "@@@STEP_LOG_LINE@python.inline@import sys@@@", |
| "@@@STEP_LOG_LINE@python.inline@host = sys.argv[1]@@@", |
| "@@@STEP_LOG_LINE@python.inline@device = sys.argv[2]@@@", |
| "@@@STEP_LOG_LINE@python.inline@for d, _, fs in os.walk(host):@@@", |
| "@@@STEP_LOG_LINE@python.inline@ p = os.path.relpath(d, host)@@@", |
| "@@@STEP_LOG_LINE@python.inline@ if p != '.' and p.startswith('.'):@@@", |
| "@@@STEP_LOG_LINE@python.inline@ continue@@@", |
| "@@@STEP_LOG_LINE@python.inline@ for f in fs:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ print os.path.join(p,f)@@@", |
| "@@@STEP_LOG_LINE@python.inline@ subprocess.check_call(['/usr/bin/adb.1.0.35', 'push',@@@", |
| "@@@STEP_LOG_LINE@python.inline@ os.path.realpath(os.path.join(host, p, f)),@@@", |
| "@@@STEP_LOG_LINE@python.inline@ os.path.join(device, p, f)])@@@", |
| "@@@STEP_LOG_END@python.inline@@@" |
| ] |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "push", |
| "[START_DIR]/tmp/SKP_VERSION", |
| "/sdcard/revenge_of_the_skiabot/SKP_VERSION" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "push [START_DIR]/tmp/SKP_VERSION /sdcard/revenge_of_the_skiabot/SKP_VERSION" |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "RECIPE_MODULE[recipe_engine::file]/resources/fileutil.py", |
| "--json-output", |
| "/path/to/tmp/json", |
| "copy", |
| "[START_DIR]/skia/infra/bots/assets/skimage/VERSION", |
| "/path/to/tmp/" |
| ], |
| "infra_step": true, |
| "name": "Get downloaded skimage VERSION" |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "RECIPE_MODULE[recipe_engine::file]/resources/fileutil.py", |
| "--json-output", |
| "/path/to/tmp/json", |
| "copy", |
| "42", |
| "[START_DIR]/tmp/SK_IMAGE_VERSION" |
| ], |
| "infra_step": true, |
| "name": "write SK_IMAGE_VERSION" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "shell", |
| "cat", |
| "/sdcard/revenge_of_the_skiabot/SK_IMAGE_VERSION" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "read /sdcard/revenge_of_the_skiabot/SK_IMAGE_VERSION", |
| "stdout": "/path/to/tmp/" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "shell", |
| "rm", |
| "-f", |
| "/sdcard/revenge_of_the_skiabot/SK_IMAGE_VERSION" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "rm /sdcard/revenge_of_the_skiabot/SK_IMAGE_VERSION" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "shell", |
| "rm", |
| "-rf", |
| "/sdcard/revenge_of_the_skiabot/images" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "rm /sdcard/revenge_of_the_skiabot/images" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "shell", |
| "mkdir", |
| "-p", |
| "/sdcard/revenge_of_the_skiabot/images" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "mkdir /sdcard/revenge_of_the_skiabot/images" |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "\nimport os\nimport subprocess\nimport sys\nhost = sys.argv[1]\ndevice = sys.argv[2]\nfor d, _, fs in os.walk(host):\n p = os.path.relpath(d, host)\n if p != '.' and p.startswith('.'):\n continue\n for f in fs:\n print os.path.join(p,f)\n subprocess.check_call(['/usr/bin/adb.1.0.35', 'push',\n os.path.realpath(os.path.join(host, p, f)),\n os.path.join(device, p, f)])\n", |
| "[START_DIR]/skimage", |
| "/sdcard/revenge_of_the_skiabot/images" |
| ], |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "push [START_DIR]/skimage/* /sdcard/revenge_of_the_skiabot/images", |
| "~followup_annotations": [ |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@import os@@@", |
| "@@@STEP_LOG_LINE@python.inline@import subprocess@@@", |
| "@@@STEP_LOG_LINE@python.inline@import sys@@@", |
| "@@@STEP_LOG_LINE@python.inline@host = sys.argv[1]@@@", |
| "@@@STEP_LOG_LINE@python.inline@device = sys.argv[2]@@@", |
| "@@@STEP_LOG_LINE@python.inline@for d, _, fs in os.walk(host):@@@", |
| "@@@STEP_LOG_LINE@python.inline@ p = os.path.relpath(d, host)@@@", |
| "@@@STEP_LOG_LINE@python.inline@ if p != '.' and p.startswith('.'):@@@", |
| "@@@STEP_LOG_LINE@python.inline@ continue@@@", |
| "@@@STEP_LOG_LINE@python.inline@ for f in fs:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ print os.path.join(p,f)@@@", |
| "@@@STEP_LOG_LINE@python.inline@ subprocess.check_call(['/usr/bin/adb.1.0.35', 'push',@@@", |
| "@@@STEP_LOG_LINE@python.inline@ os.path.realpath(os.path.join(host, p, f)),@@@", |
| "@@@STEP_LOG_LINE@python.inline@ os.path.join(device, p, f)])@@@", |
| "@@@STEP_LOG_END@python.inline@@@" |
| ] |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "push", |
| "[START_DIR]/tmp/SK_IMAGE_VERSION", |
| "/sdcard/revenge_of_the_skiabot/SK_IMAGE_VERSION" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "push [START_DIR]/tmp/SK_IMAGE_VERSION /sdcard/revenge_of_the_skiabot/SK_IMAGE_VERSION" |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "RECIPE_MODULE[recipe_engine::file]/resources/fileutil.py", |
| "--json-output", |
| "/path/to/tmp/json", |
| "copy", |
| "[START_DIR]/skia/infra/bots/assets/svg/VERSION", |
| "/path/to/tmp/" |
| ], |
| "infra_step": true, |
| "name": "Get downloaded SVG VERSION" |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "RECIPE_MODULE[recipe_engine::file]/resources/fileutil.py", |
| "--json-output", |
| "/path/to/tmp/json", |
| "copy", |
| "42", |
| "[START_DIR]/tmp/SVG_VERSION" |
| ], |
| "infra_step": true, |
| "name": "write SVG_VERSION" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "shell", |
| "cat", |
| "/sdcard/revenge_of_the_skiabot/SVG_VERSION" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "read /sdcard/revenge_of_the_skiabot/SVG_VERSION", |
| "stdout": "/path/to/tmp/" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "shell", |
| "rm", |
| "-f", |
| "/sdcard/revenge_of_the_skiabot/SVG_VERSION" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "rm /sdcard/revenge_of_the_skiabot/SVG_VERSION" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "shell", |
| "rm", |
| "-rf", |
| "/sdcard/revenge_of_the_skiabot/svgs" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "rm /sdcard/revenge_of_the_skiabot/svgs" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "shell", |
| "mkdir", |
| "-p", |
| "/sdcard/revenge_of_the_skiabot/svgs" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "mkdir /sdcard/revenge_of_the_skiabot/svgs" |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "\nimport os\nimport subprocess\nimport sys\nhost = sys.argv[1]\ndevice = sys.argv[2]\nfor d, _, fs in os.walk(host):\n p = os.path.relpath(d, host)\n if p != '.' and p.startswith('.'):\n continue\n for f in fs:\n print os.path.join(p,f)\n subprocess.check_call(['/usr/bin/adb.1.0.35', 'push',\n os.path.realpath(os.path.join(host, p, f)),\n os.path.join(device, p, f)])\n", |
| "[START_DIR]/svg", |
| "/sdcard/revenge_of_the_skiabot/svgs" |
| ], |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "push [START_DIR]/svg/* /sdcard/revenge_of_the_skiabot/svgs", |
| "~followup_annotations": [ |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@import os@@@", |
| "@@@STEP_LOG_LINE@python.inline@import subprocess@@@", |
| "@@@STEP_LOG_LINE@python.inline@import sys@@@", |
| "@@@STEP_LOG_LINE@python.inline@host = sys.argv[1]@@@", |
| "@@@STEP_LOG_LINE@python.inline@device = sys.argv[2]@@@", |
| "@@@STEP_LOG_LINE@python.inline@for d, _, fs in os.walk(host):@@@", |
| "@@@STEP_LOG_LINE@python.inline@ p = os.path.relpath(d, host)@@@", |
| "@@@STEP_LOG_LINE@python.inline@ if p != '.' and p.startswith('.'):@@@", |
| "@@@STEP_LOG_LINE@python.inline@ continue@@@", |
| "@@@STEP_LOG_LINE@python.inline@ for f in fs:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ print os.path.join(p,f)@@@", |
| "@@@STEP_LOG_LINE@python.inline@ subprocess.check_call(['/usr/bin/adb.1.0.35', 'push',@@@", |
| "@@@STEP_LOG_LINE@python.inline@ os.path.realpath(os.path.join(host, p, f)),@@@", |
| "@@@STEP_LOG_LINE@python.inline@ os.path.join(device, p, f)])@@@", |
| "@@@STEP_LOG_END@python.inline@@@" |
| ] |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "push", |
| "[START_DIR]/tmp/SVG_VERSION", |
| "/sdcard/revenge_of_the_skiabot/SVG_VERSION" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "push [START_DIR]/tmp/SVG_VERSION /sdcard/revenge_of_the_skiabot/SVG_VERSION" |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\ncpu = int(sys.argv[2])\ngov = sys.argv[3]\n\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nprint log\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nsubprocess.check_output([ADB, 'shell', 'echo \"%s\" > '\n '/sys/devices/system/cpu/cpu%d/cpufreq/scaling_governor' % (gov, cpu)])\nactual_gov = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu%d/cpufreq/scaling_governor' % cpu]).strip()\nif actual_gov != gov:\n raise Exception('(actual, expected) (%s, %s)'\n % (actual_gov, gov))\n", |
| "/usr/bin/adb.1.0.35", |
| "0", |
| "userspace" |
| ], |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "Set CPU 0's governor to userspace", |
| "timeout": 30, |
| "~followup_annotations": [ |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@import os@@@", |
| "@@@STEP_LOG_LINE@python.inline@import subprocess@@@", |
| "@@@STEP_LOG_LINE@python.inline@import sys@@@", |
| "@@@STEP_LOG_LINE@python.inline@import time@@@", |
| "@@@STEP_LOG_LINE@python.inline@ADB = sys.argv[1]@@@", |
| "@@@STEP_LOG_LINE@python.inline@cpu = int(sys.argv[2])@@@", |
| "@@@STEP_LOG_LINE@python.inline@gov = sys.argv[3]@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@log = subprocess.check_output([ADB, 'root'])@@@", |
| "@@@STEP_LOG_LINE@python.inline@# check for message like 'adbd cannot run as root in production builds'@@@", |
| "@@@STEP_LOG_LINE@python.inline@print log@@@", |
| "@@@STEP_LOG_LINE@python.inline@if 'cannot' in log:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ raise Exception('adb root failed')@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@subprocess.check_output([ADB, 'shell', 'echo \"%s\" > '@@@", |
| "@@@STEP_LOG_LINE@python.inline@ '/sys/devices/system/cpu/cpu%d/cpufreq/scaling_governor' % (gov, cpu)])@@@", |
| "@@@STEP_LOG_LINE@python.inline@actual_gov = subprocess.check_output([ADB, 'shell', 'cat '@@@", |
| "@@@STEP_LOG_LINE@python.inline@ '/sys/devices/system/cpu/cpu%d/cpufreq/scaling_governor' % cpu]).strip()@@@", |
| "@@@STEP_LOG_LINE@python.inline@if actual_gov != gov:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ raise Exception('(actual, expected) (%s, %s)'@@@", |
| "@@@STEP_LOG_LINE@python.inline@ % (actual_gov, gov))@@@", |
| "@@@STEP_LOG_END@python.inline@@@" |
| ] |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\ntarget_percent = float(sys.argv[2])\ncpu = int(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nprint log\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nroot = '/sys/devices/system/cpu/cpu%d/cpufreq' %cpu\n\n# All devices we test on give a list of their available frequencies.\navailable_freqs = subprocess.check_output([ADB, 'shell',\n 'cat %s/scaling_available_frequencies' % root])\n\n# Check for message like '/system/bin/sh: file not found'\nif available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\nelse:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\n# If scaling_max_freq is lower than our attempted setting, it won't take.\n# We must set min first, because if we try to set max to be less than min\n# (which sometimes happens after certain devices reboot) it returns a\n# perplexing permissions error.\nsubprocess.check_output([ADB, 'shell', 'echo 0 > '\n '%s/scaling_min_freq' % root])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '%s/scaling_max_freq' % (freq, root)])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '%s/scaling_setspeed' % (freq, root)])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '%s/scaling_cur_freq' % root]).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", |
| "/usr/bin/adb.1.0.35", |
| "0.6", |
| "0" |
| ], |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "Scale CPU 0 to 0.600000", |
| "timeout": 30, |
| "~followup_annotations": [ |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@import os@@@", |
| "@@@STEP_LOG_LINE@python.inline@import subprocess@@@", |
| "@@@STEP_LOG_LINE@python.inline@import sys@@@", |
| "@@@STEP_LOG_LINE@python.inline@import time@@@", |
| "@@@STEP_LOG_LINE@python.inline@ADB = sys.argv[1]@@@", |
| "@@@STEP_LOG_LINE@python.inline@target_percent = float(sys.argv[2])@@@", |
| "@@@STEP_LOG_LINE@python.inline@cpu = int(sys.argv[3])@@@", |
| "@@@STEP_LOG_LINE@python.inline@log = subprocess.check_output([ADB, 'root'])@@@", |
| "@@@STEP_LOG_LINE@python.inline@# check for message like 'adbd cannot run as root in production builds'@@@", |
| "@@@STEP_LOG_LINE@python.inline@print log@@@", |
| "@@@STEP_LOG_LINE@python.inline@if 'cannot' in log:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ raise Exception('adb root failed')@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@root = '/sys/devices/system/cpu/cpu%d/cpufreq' %cpu@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@# All devices we test on give a list of their available frequencies.@@@", |
| "@@@STEP_LOG_LINE@python.inline@available_freqs = subprocess.check_output([ADB, 'shell',@@@", |
| "@@@STEP_LOG_LINE@python.inline@ 'cat %s/scaling_available_frequencies' % root])@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@# Check for message like '/system/bin/sh: file not found'@@@", |
| "@@@STEP_LOG_LINE@python.inline@if available_freqs and '/system/bin/sh' not in available_freqs:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ available_freqs = sorted(@@@", |
| "@@@STEP_LOG_LINE@python.inline@ int(i) for i in available_freqs.strip().split())@@@", |
| "@@@STEP_LOG_LINE@python.inline@else:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ raise Exception('Could not get list of available frequencies: %s' %@@@", |
| "@@@STEP_LOG_LINE@python.inline@ available_freqs)@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@maxfreq = available_freqs[-1]@@@", |
| "@@@STEP_LOG_LINE@python.inline@target = int(round(maxfreq * target_percent))@@@", |
| "@@@STEP_LOG_LINE@python.inline@freq = maxfreq@@@", |
| "@@@STEP_LOG_LINE@python.inline@for f in reversed(available_freqs):@@@", |
| "@@@STEP_LOG_LINE@python.inline@ if f <= target:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ freq = f@@@", |
| "@@@STEP_LOG_LINE@python.inline@ break@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@print 'Setting frequency to %d' % freq@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@# If scaling_max_freq is lower than our attempted setting, it won't take.@@@", |
| "@@@STEP_LOG_LINE@python.inline@# We must set min first, because if we try to set max to be less than min@@@", |
| "@@@STEP_LOG_LINE@python.inline@# (which sometimes happens after certain devices reboot) it returns a@@@", |
| "@@@STEP_LOG_LINE@python.inline@# perplexing permissions error.@@@", |
| "@@@STEP_LOG_LINE@python.inline@subprocess.check_output([ADB, 'shell', 'echo 0 > '@@@", |
| "@@@STEP_LOG_LINE@python.inline@ '%s/scaling_min_freq' % root])@@@", |
| "@@@STEP_LOG_LINE@python.inline@subprocess.check_output([ADB, 'shell', 'echo %d > '@@@", |
| "@@@STEP_LOG_LINE@python.inline@ '%s/scaling_max_freq' % (freq, root)])@@@", |
| "@@@STEP_LOG_LINE@python.inline@subprocess.check_output([ADB, 'shell', 'echo %d > '@@@", |
| "@@@STEP_LOG_LINE@python.inline@ '%s/scaling_setspeed' % (freq, root)])@@@", |
| "@@@STEP_LOG_LINE@python.inline@time.sleep(5)@@@", |
| "@@@STEP_LOG_LINE@python.inline@actual_freq = subprocess.check_output([ADB, 'shell', 'cat '@@@", |
| "@@@STEP_LOG_LINE@python.inline@ '%s/scaling_cur_freq' % root]).strip()@@@", |
| "@@@STEP_LOG_LINE@python.inline@if actual_freq != str(freq):@@@", |
| "@@@STEP_LOG_LINE@python.inline@ raise Exception('(actual, expected) (%s, %d)'@@@", |
| "@@@STEP_LOG_LINE@python.inline@ % (actual_freq, freq))@@@", |
| "@@@STEP_LOG_END@python.inline@@@" |
| ] |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\ncpu = int(sys.argv[2])\ngov = sys.argv[3]\n\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nprint log\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nsubprocess.check_output([ADB, 'shell', 'echo \"%s\" > '\n '/sys/devices/system/cpu/cpu%d/cpufreq/scaling_governor' % (gov, cpu)])\nactual_gov = subprocess.check_output([ADB, 'shell', 'cat '\n '/sys/devices/system/cpu/cpu%d/cpufreq/scaling_governor' % cpu]).strip()\nif actual_gov != gov:\n raise Exception('(actual, expected) (%s, %s)'\n % (actual_gov, gov))\n", |
| "/usr/bin/adb.1.0.35", |
| "2", |
| "userspace" |
| ], |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "Set CPU 2's governor to userspace", |
| "timeout": 30, |
| "~followup_annotations": [ |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@import os@@@", |
| "@@@STEP_LOG_LINE@python.inline@import subprocess@@@", |
| "@@@STEP_LOG_LINE@python.inline@import sys@@@", |
| "@@@STEP_LOG_LINE@python.inline@import time@@@", |
| "@@@STEP_LOG_LINE@python.inline@ADB = sys.argv[1]@@@", |
| "@@@STEP_LOG_LINE@python.inline@cpu = int(sys.argv[2])@@@", |
| "@@@STEP_LOG_LINE@python.inline@gov = sys.argv[3]@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@log = subprocess.check_output([ADB, 'root'])@@@", |
| "@@@STEP_LOG_LINE@python.inline@# check for message like 'adbd cannot run as root in production builds'@@@", |
| "@@@STEP_LOG_LINE@python.inline@print log@@@", |
| "@@@STEP_LOG_LINE@python.inline@if 'cannot' in log:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ raise Exception('adb root failed')@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@subprocess.check_output([ADB, 'shell', 'echo \"%s\" > '@@@", |
| "@@@STEP_LOG_LINE@python.inline@ '/sys/devices/system/cpu/cpu%d/cpufreq/scaling_governor' % (gov, cpu)])@@@", |
| "@@@STEP_LOG_LINE@python.inline@actual_gov = subprocess.check_output([ADB, 'shell', 'cat '@@@", |
| "@@@STEP_LOG_LINE@python.inline@ '/sys/devices/system/cpu/cpu%d/cpufreq/scaling_governor' % cpu]).strip()@@@", |
| "@@@STEP_LOG_LINE@python.inline@if actual_gov != gov:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ raise Exception('(actual, expected) (%s, %s)'@@@", |
| "@@@STEP_LOG_LINE@python.inline@ % (actual_gov, gov))@@@", |
| "@@@STEP_LOG_END@python.inline@@@" |
| ] |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "\nimport os\nimport subprocess\nimport sys\nimport time\nADB = sys.argv[1]\ntarget_percent = float(sys.argv[2])\ncpu = int(sys.argv[3])\nlog = subprocess.check_output([ADB, 'root'])\n# check for message like 'adbd cannot run as root in production builds'\nprint log\nif 'cannot' in log:\n raise Exception('adb root failed')\n\nroot = '/sys/devices/system/cpu/cpu%d/cpufreq' %cpu\n\n# All devices we test on give a list of their available frequencies.\navailable_freqs = subprocess.check_output([ADB, 'shell',\n 'cat %s/scaling_available_frequencies' % root])\n\n# Check for message like '/system/bin/sh: file not found'\nif available_freqs and '/system/bin/sh' not in available_freqs:\n available_freqs = sorted(\n int(i) for i in available_freqs.strip().split())\nelse:\n raise Exception('Could not get list of available frequencies: %s' %\n available_freqs)\n\nmaxfreq = available_freqs[-1]\ntarget = int(round(maxfreq * target_percent))\nfreq = maxfreq\nfor f in reversed(available_freqs):\n if f <= target:\n freq = f\n break\n\nprint 'Setting frequency to %d' % freq\n\n# If scaling_max_freq is lower than our attempted setting, it won't take.\n# We must set min first, because if we try to set max to be less than min\n# (which sometimes happens after certain devices reboot) it returns a\n# perplexing permissions error.\nsubprocess.check_output([ADB, 'shell', 'echo 0 > '\n '%s/scaling_min_freq' % root])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '%s/scaling_max_freq' % (freq, root)])\nsubprocess.check_output([ADB, 'shell', 'echo %d > '\n '%s/scaling_setspeed' % (freq, root)])\ntime.sleep(5)\nactual_freq = subprocess.check_output([ADB, 'shell', 'cat '\n '%s/scaling_cur_freq' % root]).strip()\nif actual_freq != str(freq):\n raise Exception('(actual, expected) (%s, %d)'\n % (actual_freq, freq))\n", |
| "/usr/bin/adb.1.0.35", |
| "0.6", |
| "2" |
| ], |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "Scale CPU 2 to 0.600000", |
| "timeout": 30, |
| "~followup_annotations": [ |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@import os@@@", |
| "@@@STEP_LOG_LINE@python.inline@import subprocess@@@", |
| "@@@STEP_LOG_LINE@python.inline@import sys@@@", |
| "@@@STEP_LOG_LINE@python.inline@import time@@@", |
| "@@@STEP_LOG_LINE@python.inline@ADB = sys.argv[1]@@@", |
| "@@@STEP_LOG_LINE@python.inline@target_percent = float(sys.argv[2])@@@", |
| "@@@STEP_LOG_LINE@python.inline@cpu = int(sys.argv[3])@@@", |
| "@@@STEP_LOG_LINE@python.inline@log = subprocess.check_output([ADB, 'root'])@@@", |
| "@@@STEP_LOG_LINE@python.inline@# check for message like 'adbd cannot run as root in production builds'@@@", |
| "@@@STEP_LOG_LINE@python.inline@print log@@@", |
| "@@@STEP_LOG_LINE@python.inline@if 'cannot' in log:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ raise Exception('adb root failed')@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@root = '/sys/devices/system/cpu/cpu%d/cpufreq' %cpu@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@# All devices we test on give a list of their available frequencies.@@@", |
| "@@@STEP_LOG_LINE@python.inline@available_freqs = subprocess.check_output([ADB, 'shell',@@@", |
| "@@@STEP_LOG_LINE@python.inline@ 'cat %s/scaling_available_frequencies' % root])@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@# Check for message like '/system/bin/sh: file not found'@@@", |
| "@@@STEP_LOG_LINE@python.inline@if available_freqs and '/system/bin/sh' not in available_freqs:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ available_freqs = sorted(@@@", |
| "@@@STEP_LOG_LINE@python.inline@ int(i) for i in available_freqs.strip().split())@@@", |
| "@@@STEP_LOG_LINE@python.inline@else:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ raise Exception('Could not get list of available frequencies: %s' %@@@", |
| "@@@STEP_LOG_LINE@python.inline@ available_freqs)@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@maxfreq = available_freqs[-1]@@@", |
| "@@@STEP_LOG_LINE@python.inline@target = int(round(maxfreq * target_percent))@@@", |
| "@@@STEP_LOG_LINE@python.inline@freq = maxfreq@@@", |
| "@@@STEP_LOG_LINE@python.inline@for f in reversed(available_freqs):@@@", |
| "@@@STEP_LOG_LINE@python.inline@ if f <= target:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ freq = f@@@", |
| "@@@STEP_LOG_LINE@python.inline@ break@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@print 'Setting frequency to %d' % freq@@@", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@# If scaling_max_freq is lower than our attempted setting, it won't take.@@@", |
| "@@@STEP_LOG_LINE@python.inline@# We must set min first, because if we try to set max to be less than min@@@", |
| "@@@STEP_LOG_LINE@python.inline@# (which sometimes happens after certain devices reboot) it returns a@@@", |
| "@@@STEP_LOG_LINE@python.inline@# perplexing permissions error.@@@", |
| "@@@STEP_LOG_LINE@python.inline@subprocess.check_output([ADB, 'shell', 'echo 0 > '@@@", |
| "@@@STEP_LOG_LINE@python.inline@ '%s/scaling_min_freq' % root])@@@", |
| "@@@STEP_LOG_LINE@python.inline@subprocess.check_output([ADB, 'shell', 'echo %d > '@@@", |
| "@@@STEP_LOG_LINE@python.inline@ '%s/scaling_max_freq' % (freq, root)])@@@", |
| "@@@STEP_LOG_LINE@python.inline@subprocess.check_output([ADB, 'shell', 'echo %d > '@@@", |
| "@@@STEP_LOG_LINE@python.inline@ '%s/scaling_setspeed' % (freq, root)])@@@", |
| "@@@STEP_LOG_LINE@python.inline@time.sleep(5)@@@", |
| "@@@STEP_LOG_LINE@python.inline@actual_freq = subprocess.check_output([ADB, 'shell', 'cat '@@@", |
| "@@@STEP_LOG_LINE@python.inline@ '%s/scaling_cur_freq' % root]).strip()@@@", |
| "@@@STEP_LOG_LINE@python.inline@if actual_freq != str(freq):@@@", |
| "@@@STEP_LOG_LINE@python.inline@ raise Exception('(actual, expected) (%s, %d)'@@@", |
| "@@@STEP_LOG_LINE@python.inline@ % (actual_freq, freq))@@@", |
| "@@@STEP_LOG_END@python.inline@@@" |
| ] |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "push", |
| "[START_DIR]/out/Debug/nanobench", |
| "/data/local/tmp/" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "push nanobench" |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "RECIPE_MODULE[recipe_engine::file]/resources/fileutil.py", |
| "--json-output", |
| "/path/to/tmp/json", |
| "copy", |
| "set -x; /data/local/tmp/nanobench --some-flag; echo $? >/data/local/tmp/rc", |
| "[START_DIR]/tmp/nanobench.sh" |
| ], |
| "infra_step": true, |
| "name": "write nanobench.sh" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "push", |
| "[START_DIR]/tmp/nanobench.sh", |
| "/data/local/tmp/" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "push nanobench.sh" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "logcat", |
| "-c" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "clear log" |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "\nimport subprocess\nimport sys\nbin_dir = sys.argv[1]\nsh = sys.argv[2]\nsubprocess.check_call(['/usr/bin/adb.1.0.35', 'shell', 'sh', bin_dir + sh])\ntry:\n sys.exit(int(subprocess.check_output(['/usr/bin/adb.1.0.35', 'shell', 'cat',\n bin_dir + 'rc'])))\nexcept ValueError:\n print \"Couldn't read the return code. Probably killed for OOM.\"\n sys.exit(1)\n", |
| "/data/local/tmp/", |
| "nanobench.sh" |
| ], |
| "name": "nanobench", |
| "~followup_annotations": [ |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@import subprocess@@@", |
| "@@@STEP_LOG_LINE@python.inline@import sys@@@", |
| "@@@STEP_LOG_LINE@python.inline@bin_dir = sys.argv[1]@@@", |
| "@@@STEP_LOG_LINE@python.inline@sh = sys.argv[2]@@@", |
| "@@@STEP_LOG_LINE@python.inline@subprocess.check_call(['/usr/bin/adb.1.0.35', 'shell', 'sh', bin_dir + sh])@@@", |
| "@@@STEP_LOG_LINE@python.inline@try:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ sys.exit(int(subprocess.check_output(['/usr/bin/adb.1.0.35', 'shell', 'cat',@@@", |
| "@@@STEP_LOG_LINE@python.inline@ bin_dir + 'rc'])))@@@", |
| "@@@STEP_LOG_LINE@python.inline@except ValueError:@@@", |
| "@@@STEP_LOG_LINE@python.inline@ print \"Couldn't read the return code. Probably killed for OOM.\"@@@", |
| "@@@STEP_LOG_LINE@python.inline@ sys.exit(1)@@@", |
| "@@@STEP_LOG_END@python.inline@@@" |
| ] |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "pull", |
| "/sdcard/revenge_of_the_skiabot/perf", |
| "[CUSTOM_[SWARM_OUT_DIR]]/perfdata/Perf-Android-Clang-NexusPlayer-GPU-PowerVR-x86-Debug-All-Android/data" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "pull /sdcard/revenge_of_the_skiabot/perf [CUSTOM_[SWARM_OUT_DIR]]/perfdata/Perf-Android-Clang-NexusPlayer-GPU-PowerVR-x86-Debug-All-Android/data" |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "\nimport os\nimport subprocess\nimport sys\nout = sys.argv[1]\nlog = subprocess.check_output(['/usr/bin/adb.1.0.35', 'logcat', '-d'])\nfor line in log.split('\\n'):\n tokens = line.split()\n if len(tokens) == 11 and tokens[-7] == 'F' and tokens[-3] == 'pc':\n addr, path = tokens[-2:]\n local = os.path.join(out, os.path.basename(path))\n if os.path.exists(local):\n sym = subprocess.check_output(['addr2line', '-Cfpe', local, addr])\n line = line.replace(addr, addr + ' ' + sym.strip())\n print line\n", |
| "[START_DIR]/out/Debug" |
| ], |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "dump log", |
| "timeout": 300, |
| "~followup_annotations": [ |
| "step returned non-zero exit code: 1", |
| "@@@STEP_LOG_LINE@python.inline@@@@", |
| "@@@STEP_LOG_LINE@python.inline@import os@@@", |
| "@@@STEP_LOG_LINE@python.inline@import subprocess@@@", |
| "@@@STEP_LOG_LINE@python.inline@import sys@@@", |
| "@@@STEP_LOG_LINE@python.inline@out = sys.argv[1]@@@", |
| "@@@STEP_LOG_LINE@python.inline@log = subprocess.check_output(['/usr/bin/adb.1.0.35', 'logcat', '-d'])@@@", |
| "@@@STEP_LOG_LINE@python.inline@for line in log.split('\\n'):@@@", |
| "@@@STEP_LOG_LINE@python.inline@ tokens = line.split()@@@", |
| "@@@STEP_LOG_LINE@python.inline@ if len(tokens) == 11 and tokens[-7] == 'F' and tokens[-3] == 'pc':@@@", |
| "@@@STEP_LOG_LINE@python.inline@ addr, path = tokens[-2:]@@@", |
| "@@@STEP_LOG_LINE@python.inline@ local = os.path.join(out, os.path.basename(path))@@@", |
| "@@@STEP_LOG_LINE@python.inline@ if os.path.exists(local):@@@", |
| "@@@STEP_LOG_LINE@python.inline@ sym = subprocess.check_output(['addr2line', '-Cfpe', local, addr])@@@", |
| "@@@STEP_LOG_LINE@python.inline@ line = line.replace(addr, addr + ' ' + sym.strip())@@@", |
| "@@@STEP_LOG_LINE@python.inline@ print line@@@", |
| "@@@STEP_LOG_END@python.inline@@@", |
| "@@@STEP_EXCEPTION@@@" |
| ] |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "import os\nprint os.environ.get('SWARMING_BOT_ID', '')\n" |
| ], |
| "name": "get swarming bot id", |
| "stdout": "/path/to/tmp/", |
| "~followup_annotations": [ |
| "@@@STEP_LOG_LINE@python.inline@import os@@@", |
| "@@@STEP_LOG_LINE@python.inline@print os.environ.get('SWARMING_BOT_ID', '')@@@", |
| "@@@STEP_LOG_END@python.inline@@@" |
| ] |
| }, |
| { |
| "cmd": [ |
| "python", |
| "-u", |
| "RECIPE_MODULE[recipe_engine::file]/resources/fileutil.py", |
| "--json-output", |
| "/path/to/tmp/json", |
| "copy", |
| " ", |
| "/home/chrome-bot/build123-m2--device5.force_quarantine" |
| ], |
| "infra_step": true, |
| "name": "Quarantining Bot" |
| }, |
| { |
| "cmd": [ |
| "/usr/bin/adb.1.0.35", |
| "kill-server" |
| ], |
| "cwd": "[START_DIR]/skia", |
| "env": { |
| "BUILDTYPE": "Debug", |
| "CHROME_HEADLESS": "1", |
| "PATH": "<PATH>:RECIPE_PACKAGE_REPO[depot_tools]", |
| "SKIA_OUT": "[START_DIR]/out" |
| }, |
| "infra_step": true, |
| "name": "kill adb server" |
| }, |
| { |
| "name": "$result", |
| "reason": "Failed build steps: dump log", |
| "recipe_result": null, |
| "status_code": 1 |
| } |
| ] |