| /* |
| * Copyright 2008 The Android Open Source Project |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #include "SkBitmapDevice.h" |
| #include "SkCanvas.h" |
| #include "SkCanvasPriv.h" |
| #include "SkClipStack.h" |
| #include "SkColorFilter.h" |
| #include "SkDraw.h" |
| #include "SkDrawable.h" |
| #include "SkDrawFilter.h" |
| #include "SkDrawLooper.h" |
| #include "SkImage.h" |
| #include "SkImage_Base.h" |
| #include "SkImageFilter.h" |
| #include "SkImageFilterCache.h" |
| #include "SkLatticeIter.h" |
| #include "SkMakeUnique.h" |
| #include "SkMatrixUtils.h" |
| #include "SkMetaData.h" |
| #include "SkNoDrawCanvas.h" |
| #include "SkNx.h" |
| #include "SkPaintPriv.h" |
| #include "SkPatchUtils.h" |
| #include "SkPicture.h" |
| #include "SkRadialShadowMapShader.h" |
| #include "SkRasterClip.h" |
| #include "SkRasterHandleAllocator.h" |
| #include "SkRRect.h" |
| #include "SkShadowPaintFilterCanvas.h" |
| #include "SkShadowShader.h" |
| #include "SkSmallAllocator.h" |
| #include "SkSpecialImage.h" |
| #include "SkSurface_Base.h" |
| #include "SkTextBlob.h" |
| #include "SkTextFormatParams.h" |
| #include "SkTLazy.h" |
| #include "SkTraceEvent.h" |
| #include <new> |
| |
| #if SK_SUPPORT_GPU |
| #include "GrContext.h" |
| #include "GrRenderTarget.h" |
| #include "SkGrPriv.h" |
| |
| #endif |
| #include "SkClipOpPriv.h" |
| |
| #define RETURN_ON_NULL(ptr) do { if (nullptr == (ptr)) return; } while (0) |
| |
| /* |
| * Return true if the drawing this rect would hit every pixels in the canvas. |
| * |
| * Returns false if |
| * - rect does not contain the canvas' bounds |
| * - paint is not fill |
| * - paint would blur or otherwise change the coverage of the rect |
| */ |
| bool SkCanvas::wouldOverwriteEntireSurface(const SkRect* rect, const SkPaint* paint, |
| ShaderOverrideOpacity overrideOpacity) const { |
| static_assert((int)SkPaintPriv::kNone_ShaderOverrideOpacity == |
| (int)kNone_ShaderOverrideOpacity, |
| "need_matching_enums0"); |
| static_assert((int)SkPaintPriv::kOpaque_ShaderOverrideOpacity == |
| (int)kOpaque_ShaderOverrideOpacity, |
| "need_matching_enums1"); |
| static_assert((int)SkPaintPriv::kNotOpaque_ShaderOverrideOpacity == |
| (int)kNotOpaque_ShaderOverrideOpacity, |
| "need_matching_enums2"); |
| |
| const SkISize size = this->getBaseLayerSize(); |
| const SkRect bounds = SkRect::MakeIWH(size.width(), size.height()); |
| if (!this->getClipStack()->quickContains(bounds)) { |
| return false; |
| } |
| |
| if (rect) { |
| if (!this->getTotalMatrix().isScaleTranslate()) { |
| return false; // conservative |
| } |
| |
| SkRect devRect; |
| this->getTotalMatrix().mapRectScaleTranslate(&devRect, *rect); |
| if (!devRect.contains(bounds)) { |
| return false; |
| } |
| } |
| |
| if (paint) { |
| SkPaint::Style paintStyle = paint->getStyle(); |
| if (!(paintStyle == SkPaint::kFill_Style || |
| paintStyle == SkPaint::kStrokeAndFill_Style)) { |
| return false; |
| } |
| if (paint->getMaskFilter() || paint->getLooper() |
| || paint->getPathEffect() || paint->getImageFilter()) { |
| return false; // conservative |
| } |
| } |
| return SkPaintPriv::Overwrites(paint, (SkPaintPriv::ShaderOverrideOpacity)overrideOpacity); |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////////////////////////// |
| |
| static bool gIgnoreSaveLayerBounds; |
| void SkCanvas::Internal_Private_SetIgnoreSaveLayerBounds(bool ignore) { |
| gIgnoreSaveLayerBounds = ignore; |
| } |
| bool SkCanvas::Internal_Private_GetIgnoreSaveLayerBounds() { |
| return gIgnoreSaveLayerBounds; |
| } |
| |
| static bool gTreatSpriteAsBitmap; |
| void SkCanvas::Internal_Private_SetTreatSpriteAsBitmap(bool spriteAsBitmap) { |
| gTreatSpriteAsBitmap = spriteAsBitmap; |
| } |
| bool SkCanvas::Internal_Private_GetTreatSpriteAsBitmap() { |
| return gTreatSpriteAsBitmap; |
| } |
| |
| // experimental for faster tiled drawing... |
| //#define SK_TRACE_SAVERESTORE |
| |
| #ifdef SK_TRACE_SAVERESTORE |
| static int gLayerCounter; |
| static void inc_layer() { ++gLayerCounter; printf("----- inc layer %d\n", gLayerCounter); } |
| static void dec_layer() { --gLayerCounter; printf("----- dec layer %d\n", gLayerCounter); } |
| |
| static int gRecCounter; |
| static void inc_rec() { ++gRecCounter; printf("----- inc rec %d\n", gRecCounter); } |
| static void dec_rec() { --gRecCounter; printf("----- dec rec %d\n", gRecCounter); } |
| |
| static int gCanvasCounter; |
| static void inc_canvas() { ++gCanvasCounter; printf("----- inc canvas %d\n", gCanvasCounter); } |
| static void dec_canvas() { --gCanvasCounter; printf("----- dec canvas %d\n", gCanvasCounter); } |
| #else |
| #define inc_layer() |
| #define dec_layer() |
| #define inc_rec() |
| #define dec_rec() |
| #define inc_canvas() |
| #define dec_canvas() |
| #endif |
| |
| typedef SkTLazy<SkPaint> SkLazyPaint; |
| |
| void SkCanvas::predrawNotify(bool willOverwritesEntireSurface) { |
| if (fSurfaceBase) { |
| fSurfaceBase->aboutToDraw(willOverwritesEntireSurface |
| ? SkSurface::kDiscard_ContentChangeMode |
| : SkSurface::kRetain_ContentChangeMode); |
| } |
| } |
| |
| void SkCanvas::predrawNotify(const SkRect* rect, const SkPaint* paint, |
| ShaderOverrideOpacity overrideOpacity) { |
| if (fSurfaceBase) { |
| SkSurface::ContentChangeMode mode = SkSurface::kRetain_ContentChangeMode; |
| // Since willOverwriteAllPixels() may not be complete free to call, we only do so if |
| // there is an outstanding snapshot, since w/o that, there will be no copy-on-write |
| // and therefore we don't care which mode we're in. |
| // |
| if (fSurfaceBase->outstandingImageSnapshot()) { |
| if (this->wouldOverwriteEntireSurface(rect, paint, overrideOpacity)) { |
| mode = SkSurface::kDiscard_ContentChangeMode; |
| } |
| } |
| fSurfaceBase->aboutToDraw(mode); |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| /* This is the record we keep for each SkBaseDevice that the user installs. |
| The clip/matrix/proc are fields that reflect the top of the save/restore |
| stack. Whenever the canvas changes, it marks a dirty flag, and then before |
| these are used (assuming we're not on a layer) we rebuild these cache |
| values: they reflect the top of the save stack, but translated and clipped |
| by the device's XY offset and bitmap-bounds. |
| */ |
| struct DeviceCM { |
| DeviceCM* fNext; |
| SkBaseDevice* fDevice; |
| SkRasterClip fClip; |
| SkPaint* fPaint; // may be null (in the future) |
| const SkMatrix* fMatrix; |
| SkMatrix fMatrixStorage; |
| SkMatrix fStashedMatrix; // original CTM; used by imagefilter in saveLayer |
| |
| DeviceCM(SkBaseDevice* device, const SkPaint* paint, SkCanvas* canvas, |
| bool conservativeRasterClip, const SkMatrix& stashed) |
| : fNext(nullptr) |
| , fClip(conservativeRasterClip) |
| , fStashedMatrix(stashed) |
| { |
| SkSafeRef(device); |
| fDevice = device; |
| fPaint = paint ? new SkPaint(*paint) : nullptr; |
| } |
| |
| ~DeviceCM() { |
| SkSafeUnref(fDevice); |
| delete fPaint; |
| } |
| |
| void reset(const SkIRect& bounds) { |
| SkASSERT(!fPaint); |
| SkASSERT(!fNext); |
| SkASSERT(fDevice); |
| fClip.setRect(bounds); |
| } |
| |
| void updateMC(const SkMatrix& totalMatrix, const SkRasterClip& totalClip, |
| SkRasterClip* updateClip) { |
| int x = fDevice->getOrigin().x(); |
| int y = fDevice->getOrigin().y(); |
| int width = fDevice->width(); |
| int height = fDevice->height(); |
| |
| if ((x | y) == 0) { |
| fMatrix = &totalMatrix; |
| fClip = totalClip; |
| } else { |
| fMatrixStorage = totalMatrix; |
| fMatrixStorage.postTranslate(SkIntToScalar(-x), |
| SkIntToScalar(-y)); |
| fMatrix = &fMatrixStorage; |
| |
| totalClip.translate(-x, -y, &fClip); |
| } |
| |
| fClip.op(SkIRect::MakeWH(width, height), SkRegion::kIntersect_Op); |
| |
| // intersect clip, but don't translate it (yet) |
| |
| if (updateClip) { |
| updateClip->op(SkIRect::MakeXYWH(x, y, width, height), |
| SkRegion::kDifference_Op); |
| } |
| |
| #ifdef SK_DEBUG |
| if (!fClip.isEmpty()) { |
| SkIRect deviceR; |
| deviceR.set(0, 0, width, height); |
| SkASSERT(deviceR.contains(fClip.getBounds())); |
| } |
| #endif |
| } |
| }; |
| |
| /* This is the record we keep for each save/restore level in the stack. |
| Since a level optionally copies the matrix and/or stack, we have pointers |
| for these fields. If the value is copied for this level, the copy is |
| stored in the ...Storage field, and the pointer points to that. If the |
| value is not copied for this level, we ignore ...Storage, and just point |
| at the corresponding value in the previous level in the stack. |
| */ |
| class SkCanvas::MCRec { |
| public: |
| SkDrawFilter* fFilter; // the current filter (or null) |
| DeviceCM* fLayer; |
| /* If there are any layers in the stack, this points to the top-most |
| one that is at or below this level in the stack (so we know what |
| bitmap/device to draw into from this level. This value is NOT |
| reference counted, since the real owner is either our fLayer field, |
| or a previous one in a lower level.) |
| */ |
| DeviceCM* fTopLayer; |
| SkRasterClip fRasterClip; |
| SkMatrix fMatrix; |
| int fDeferredSaveCount; |
| |
| // This is the current cumulative depth (aggregate of all done translateZ calls) |
| SkScalar fCurDrawDepth; |
| |
| MCRec(bool conservativeRasterClip) : fRasterClip(conservativeRasterClip) { |
| fFilter = nullptr; |
| fLayer = nullptr; |
| fTopLayer = nullptr; |
| fMatrix.reset(); |
| fDeferredSaveCount = 0; |
| fCurDrawDepth = 0; |
| |
| // don't bother initializing fNext |
| inc_rec(); |
| } |
| MCRec(const MCRec& prev) : fRasterClip(prev.fRasterClip), fMatrix(prev.fMatrix), |
| fCurDrawDepth(prev.fCurDrawDepth) { |
| fFilter = SkSafeRef(prev.fFilter); |
| fLayer = nullptr; |
| fTopLayer = prev.fTopLayer; |
| fDeferredSaveCount = 0; |
| |
| // don't bother initializing fNext |
| inc_rec(); |
| } |
| ~MCRec() { |
| SkSafeUnref(fFilter); |
| delete fLayer; |
| dec_rec(); |
| } |
| |
| void reset(const SkIRect& bounds) { |
| SkASSERT(fLayer); |
| SkASSERT(fDeferredSaveCount == 0); |
| |
| fMatrix.reset(); |
| fRasterClip.setRect(bounds); |
| fLayer->reset(bounds); |
| } |
| }; |
| |
| static SkIRect compute_device_bounds(SkBaseDevice* device) { |
| return SkIRect::MakeXYWH(device->getOrigin().x(), device->getOrigin().y(), |
| device->width(), device->height()); |
| } |
| |
| class SkDrawIter : public SkDraw { |
| public: |
| SkDrawIter(SkCanvas* canvas) { |
| canvas->updateDeviceCMCache(); |
| |
| fClipStack = canvas->getClipStack(); |
| fCurrLayer = canvas->fMCRec->fTopLayer; |
| |
| fMultiDeviceCS = nullptr; |
| if (fCurrLayer->fNext) { |
| fMultiDeviceCS = canvas->fClipStack.get(); |
| fMultiDeviceCS->save(); |
| } |
| } |
| |
| ~SkDrawIter() { |
| if (fMultiDeviceCS) { |
| fMultiDeviceCS->restore(); |
| } |
| } |
| |
| bool next() { |
| if (fMultiDeviceCS && fDevice) { |
| // remove the previous device's bounds |
| fMultiDeviceCS->clipDevRect(compute_device_bounds(fDevice), kDifference_SkClipOp); |
| } |
| |
| // skip over recs with empty clips |
| while (fCurrLayer && fCurrLayer->fClip.isEmpty()) { |
| fCurrLayer = fCurrLayer->fNext; |
| } |
| |
| const DeviceCM* rec = fCurrLayer; |
| if (rec && rec->fDevice) { |
| |
| fMatrix = rec->fMatrix; |
| fRC = &rec->fClip; |
| fDevice = rec->fDevice; |
| if (!fDevice->accessPixels(&fDst)) { |
| fDst.reset(fDevice->imageInfo(), nullptr, 0); |
| } |
| fPaint = rec->fPaint; |
| SkDEBUGCODE(this->validate();) |
| |
| fCurrLayer = rec->fNext; |
| // fCurrLayer may be nullptr now |
| |
| return true; |
| } |
| return false; |
| } |
| |
| SkBaseDevice* getDevice() const { return fDevice; } |
| const SkRasterClip& getClip() const { return *fRC; } |
| int getX() const { return fDevice->getOrigin().x(); } |
| int getY() const { return fDevice->getOrigin().y(); } |
| const SkMatrix& getMatrix() const { return *fMatrix; } |
| const SkPaint* getPaint() const { return fPaint; } |
| |
| private: |
| const DeviceCM* fCurrLayer; |
| const SkPaint* fPaint; // May be null. |
| SkClipStack* fMultiDeviceCS; |
| |
| typedef SkDraw INHERITED; |
| }; |
| |
| ///////////////////////////////////////////////////////////////////////////// |
| |
| static SkPaint* set_if_needed(SkLazyPaint* lazy, const SkPaint& orig) { |
| return lazy->isValid() ? lazy->get() : lazy->set(orig); |
| } |
| |
| /** |
| * If the paint has an imagefilter, but it can be simplified to just a colorfilter, return that |
| * colorfilter, else return nullptr. |
| */ |
| static sk_sp<SkColorFilter> image_to_color_filter(const SkPaint& paint) { |
| SkImageFilter* imgf = paint.getImageFilter(); |
| if (!imgf) { |
| return nullptr; |
| } |
| |
| SkColorFilter* imgCFPtr; |
| if (!imgf->asAColorFilter(&imgCFPtr)) { |
| return nullptr; |
| } |
| sk_sp<SkColorFilter> imgCF(imgCFPtr); |
| |
| SkColorFilter* paintCF = paint.getColorFilter(); |
| if (nullptr == paintCF) { |
| // there is no existing paint colorfilter, so we can just return the imagefilter's |
| return imgCF; |
| } |
| |
| // The paint has both a colorfilter(paintCF) and an imagefilter-which-is-a-colorfilter(imgCF) |
| // and we need to combine them into a single colorfilter. |
| return SkColorFilter::MakeComposeFilter(std::move(imgCF), sk_ref_sp(paintCF)); |
| } |
| |
| /** |
| * There are many bounds in skia. A circle's bounds is just its center extended by its radius. |
| * However, if we stroke a circle, then the "bounds" of that is larger, since it will now draw |
| * outside of its raw-bounds by 1/2 the stroke width. SkPaint has lots of optional |
| * effects/attributes that can modify the effective bounds of a given primitive -- maskfilters, |
| * patheffects, stroking, etc. This function takes a raw bounds and a paint, and returns the |
| * conservative "effective" bounds based on the settings in the paint... with one exception. This |
| * function does *not* look at the imagefilter, which can also modify the effective bounds. It is |
| * deliberately ignored. |
| */ |
| static const SkRect& apply_paint_to_bounds_sans_imagefilter(const SkPaint& paint, |
| const SkRect& rawBounds, |
| SkRect* storage) { |
| SkPaint tmpUnfiltered(paint); |
| tmpUnfiltered.setImageFilter(nullptr); |
| if (tmpUnfiltered.canComputeFastBounds()) { |
| return tmpUnfiltered.computeFastBounds(rawBounds, storage); |
| } else { |
| return rawBounds; |
| } |
| } |
| |
| class AutoDrawLooper { |
| public: |
| // "rawBounds" is the original bounds of the primitive about to be drawn, unmodified by the |
| // paint. It's used to determine the size of the offscreen layer for filters. |
| // If null, the clip will be used instead. |
| AutoDrawLooper(SkCanvas* canvas, const SkPaint& paint, bool skipLayerForImageFilter = false, |
| const SkRect* rawBounds = nullptr) : fOrigPaint(paint) { |
| fCanvas = canvas; |
| #ifdef SK_SUPPORT_LEGACY_DRAWFILTER |
| fFilter = canvas->getDrawFilter(); |
| #else |
| fFilter = nullptr; |
| #endif |
| fPaint = &fOrigPaint; |
| fSaveCount = canvas->getSaveCount(); |
| fTempLayerForImageFilter = false; |
| fDone = false; |
| |
| auto simplifiedCF = image_to_color_filter(fOrigPaint); |
| if (simplifiedCF) { |
| SkPaint* paint = set_if_needed(&fLazyPaintInit, fOrigPaint); |
| paint->setColorFilter(std::move(simplifiedCF)); |
| paint->setImageFilter(nullptr); |
| fPaint = paint; |
| } |
| |
| if (!skipLayerForImageFilter && fPaint->getImageFilter()) { |
| /** |
| * We implement ImageFilters for a given draw by creating a layer, then applying the |
| * imagefilter to the pixels of that layer (its backing surface/image), and then |
| * we call restore() to xfer that layer to the main canvas. |
| * |
| * 1. SaveLayer (with a paint containing the current imagefilter and xfermode) |
| * 2. Generate the src pixels: |
| * Remove the imagefilter and the xfermode from the paint that we (AutoDrawLooper) |
| * return (fPaint). We then draw the primitive (using srcover) into a cleared |
| * buffer/surface. |
| * 3. Restore the layer created in #1 |
| * The imagefilter is passed the buffer/surface from the layer (now filled with the |
| * src pixels of the primitive). It returns a new "filtered" buffer, which we |
| * draw onto the previous layer using the xfermode from the original paint. |
| */ |
| SkPaint tmp; |
| tmp.setImageFilter(fPaint->refImageFilter()); |
| tmp.setBlendMode(fPaint->getBlendMode()); |
| SkRect storage; |
| if (rawBounds) { |
| // Make rawBounds include all paint outsets except for those due to image filters. |
| rawBounds = &apply_paint_to_bounds_sans_imagefilter(*fPaint, *rawBounds, &storage); |
| } |
| (void)canvas->internalSaveLayer(SkCanvas::SaveLayerRec(rawBounds, &tmp), |
| SkCanvas::kFullLayer_SaveLayerStrategy); |
| fTempLayerForImageFilter = true; |
| // we remove the imagefilter/xfermode inside doNext() |
| } |
| |
| if (SkDrawLooper* looper = paint.getLooper()) { |
| fLooperContext = fLooperContextAllocator.createWithIniter( |
| looper->contextSize(), |
| [&](void* buffer) { |
| return looper->createContext(canvas, buffer); |
| }); |
| fIsSimple = false; |
| } else { |
| fLooperContext = nullptr; |
| // can we be marked as simple? |
| fIsSimple = !fFilter && !fTempLayerForImageFilter; |
| } |
| } |
| |
| ~AutoDrawLooper() { |
| if (fTempLayerForImageFilter) { |
| fCanvas->internalRestore(); |
| } |
| SkASSERT(fCanvas->getSaveCount() == fSaveCount); |
| } |
| |
| const SkPaint& paint() const { |
| SkASSERT(fPaint); |
| return *fPaint; |
| } |
| |
| bool next(SkDrawFilter::Type drawType) { |
| if (fDone) { |
| return false; |
| } else if (fIsSimple) { |
| fDone = true; |
| return !fPaint->nothingToDraw(); |
| } else { |
| return this->doNext(drawType); |
| } |
| } |
| |
| private: |
| SkLazyPaint fLazyPaintInit; // base paint storage in case we need to modify it |
| SkLazyPaint fLazyPaintPerLooper; // per-draw-looper storage, so the looper can modify it |
| SkCanvas* fCanvas; |
| const SkPaint& fOrigPaint; |
| SkDrawFilter* fFilter; |
| const SkPaint* fPaint; |
| int fSaveCount; |
| bool fTempLayerForImageFilter; |
| bool fDone; |
| bool fIsSimple; |
| SkDrawLooper::Context* fLooperContext; |
| SkSmallAllocator<1, 32> fLooperContextAllocator; |
| |
| bool doNext(SkDrawFilter::Type drawType); |
| }; |
| |
| bool AutoDrawLooper::doNext(SkDrawFilter::Type drawType) { |
| fPaint = nullptr; |
| SkASSERT(!fIsSimple); |
| SkASSERT(fLooperContext || fFilter || fTempLayerForImageFilter); |
| |
| SkPaint* paint = fLazyPaintPerLooper.set(fLazyPaintInit.isValid() ? |
| *fLazyPaintInit.get() : fOrigPaint); |
| |
| if (fTempLayerForImageFilter) { |
| paint->setImageFilter(nullptr); |
| paint->setBlendMode(SkBlendMode::kSrcOver); |
| } |
| |
| if (fLooperContext && !fLooperContext->next(fCanvas, paint)) { |
| fDone = true; |
| return false; |
| } |
| if (fFilter) { |
| if (!fFilter->filter(paint, drawType)) { |
| fDone = true; |
| return false; |
| } |
| if (nullptr == fLooperContext) { |
| // no looper means we only draw once |
| fDone = true; |
| } |
| } |
| fPaint = paint; |
| |
| // if we only came in here for the imagefilter, mark us as done |
| if (!fLooperContext && !fFilter) { |
| fDone = true; |
| } |
| |
| // call this after any possible paint modifiers |
| if (fPaint->nothingToDraw()) { |
| fPaint = nullptr; |
| return false; |
| } |
| return true; |
| } |
| |
| ////////// macros to place around the internal draw calls ////////////////// |
| |
| #define LOOPER_BEGIN_DRAWBITMAP(paint, skipLayerForFilter, bounds) \ |
| this->predrawNotify(); \ |
| AutoDrawLooper looper(this, paint, skipLayerForFilter, bounds); \ |
| while (looper.next(SkDrawFilter::kBitmap_Type)) { \ |
| SkDrawIter iter(this); |
| |
| |
| #define LOOPER_BEGIN_DRAWDEVICE(paint, type) \ |
| this->predrawNotify(); \ |
| AutoDrawLooper looper(this, paint, true); \ |
| while (looper.next(type)) { \ |
| SkDrawIter iter(this); |
| |
| #define LOOPER_BEGIN(paint, type, bounds) \ |
| this->predrawNotify(); \ |
| AutoDrawLooper looper(this, paint, false, bounds); \ |
| while (looper.next(type)) { \ |
| SkDrawIter iter(this); |
| |
| #define LOOPER_BEGIN_CHECK_COMPLETE_OVERWRITE(paint, type, bounds, auxOpaque) \ |
| this->predrawNotify(bounds, &paint, auxOpaque); \ |
| AutoDrawLooper looper(this, paint, false, bounds); \ |
| while (looper.next(type)) { \ |
| SkDrawIter iter(this); |
| |
| #define LOOPER_END } |
| |
| //////////////////////////////////////////////////////////////////////////// |
| |
| static inline SkRect qr_clip_bounds(const SkIRect& bounds) { |
| if (bounds.isEmpty()) { |
| return SkRect::MakeEmpty(); |
| } |
| |
| // Expand bounds out by 1 in case we are anti-aliasing. We store the |
| // bounds as floats to enable a faster quick reject implementation. |
| SkRect dst; |
| SkNx_cast<float>(Sk4i::Load(&bounds.fLeft) + Sk4i(-1,-1,1,1)).store(&dst.fLeft); |
| return dst; |
| } |
| |
| void SkCanvas::resetForNextPicture(const SkIRect& bounds) { |
| this->restoreToCount(1); |
| fClipStack->reset(); |
| fMCRec->reset(bounds); |
| |
| // We're peering through a lot of structs here. Only at this scope do we |
| // know that the device is an SkBitmapDevice (really an SkNoPixelsBitmapDevice). |
| static_cast<SkBitmapDevice*>(fMCRec->fLayer->fDevice)->setNewSize(bounds.size()); |
| fDeviceClipBounds = qr_clip_bounds(bounds); |
| fIsScaleTranslate = true; |
| } |
| |
| SkBaseDevice* SkCanvas::init(SkBaseDevice* device, InitFlags flags) { |
| if (device && device->forceConservativeRasterClip()) { |
| flags = InitFlags(flags | kConservativeRasterClip_InitFlag); |
| } |
| // Since init() is only called once by our constructors, it is safe to perform this |
| // const-cast. |
| *const_cast<bool*>(&fConservativeRasterClip) = SkToBool(flags & kConservativeRasterClip_InitFlag); |
| |
| fAllowSimplifyClip = false; |
| fDeviceCMDirty = true; |
| fSaveCount = 1; |
| fMetaData = nullptr; |
| #ifdef SK_EXPERIMENTAL_SHADOWING |
| fLights = nullptr; |
| #endif |
| |
| fClipStack.reset(new SkClipStack); |
| |
| fMCRec = (MCRec*)fMCStack.push_back(); |
| new (fMCRec) MCRec(fConservativeRasterClip); |
| fMCRec->fRasterClip.setDeviceClipRestriction(&fClipRestrictionRect); |
| fIsScaleTranslate = true; |
| |
| SkASSERT(sizeof(DeviceCM) <= sizeof(fDeviceCMStorage)); |
| fMCRec->fLayer = (DeviceCM*)fDeviceCMStorage; |
| new (fDeviceCMStorage) DeviceCM(nullptr, nullptr, nullptr, fConservativeRasterClip, |
| fMCRec->fMatrix); |
| |
| fMCRec->fTopLayer = fMCRec->fLayer; |
| |
| fSurfaceBase = nullptr; |
| |
| if (device) { |
| // The root device and the canvas should always have the same pixel geometry |
| SkASSERT(fProps.pixelGeometry() == device->surfaceProps().pixelGeometry()); |
| fMCRec->fLayer->fDevice = SkRef(device); |
| fMCRec->fRasterClip.setRect(device->getGlobalBounds()); |
| fDeviceClipBounds = qr_clip_bounds(device->getGlobalBounds()); |
| } |
| |
| return device; |
| } |
| |
| SkCanvas::SkCanvas() |
| : fMCStack(sizeof(MCRec), fMCRecStorage, sizeof(fMCRecStorage)) |
| , fProps(SkSurfaceProps::kLegacyFontHost_InitType) |
| , fConservativeRasterClip(false) |
| { |
| inc_canvas(); |
| |
| this->init(nullptr, kDefault_InitFlags); |
| } |
| |
| static SkBitmap make_nopixels(int width, int height) { |
| SkBitmap bitmap; |
| bitmap.setInfo(SkImageInfo::MakeUnknown(width, height)); |
| return bitmap; |
| } |
| |
| class SkNoPixelsBitmapDevice : public SkBitmapDevice { |
| public: |
| SkNoPixelsBitmapDevice(const SkIRect& bounds, const SkSurfaceProps& surfaceProps) |
| : INHERITED(make_nopixels(bounds.width(), bounds.height()), surfaceProps) |
| { |
| this->setOrigin(bounds.x(), bounds.y()); |
| } |
| |
| private: |
| |
| typedef SkBitmapDevice INHERITED; |
| }; |
| |
| SkCanvas::SkCanvas(int width, int height, const SkSurfaceProps* props) |
| : fMCStack(sizeof(MCRec), fMCRecStorage, sizeof(fMCRecStorage)) |
| , fProps(SkSurfacePropsCopyOrDefault(props)) |
| , fConservativeRasterClip(false) |
| { |
| inc_canvas(); |
| |
| this->init(new SkNoPixelsBitmapDevice(SkIRect::MakeWH(width, height), fProps), |
| kDefault_InitFlags)->unref(); |
| } |
| |
| SkCanvas::SkCanvas(const SkIRect& bounds, InitFlags flags) |
| : fMCStack(sizeof(MCRec), fMCRecStorage, sizeof(fMCRecStorage)) |
| , fProps(SkSurfaceProps::kLegacyFontHost_InitType) |
| , fConservativeRasterClip(false) |
| { |
| inc_canvas(); |
| |
| this->init(new SkNoPixelsBitmapDevice(bounds, fProps), flags)->unref(); |
| } |
| |
| SkCanvas::SkCanvas(SkBaseDevice* device) |
| : fMCStack(sizeof(MCRec), fMCRecStorage, sizeof(fMCRecStorage)) |
| , fProps(device->surfaceProps()) |
| , fConservativeRasterClip(false) |
| { |
| inc_canvas(); |
| |
| this->init(device, kDefault_InitFlags); |
| } |
| |
| SkCanvas::SkCanvas(SkBaseDevice* device, InitFlags flags) |
| : fMCStack(sizeof(MCRec), fMCRecStorage, sizeof(fMCRecStorage)) |
| , fProps(device->surfaceProps()) |
| , fConservativeRasterClip(false) |
| { |
| inc_canvas(); |
| |
| this->init(device, flags); |
| } |
| |
| SkCanvas::SkCanvas(const SkBitmap& bitmap, const SkSurfaceProps& props) |
| : fMCStack(sizeof(MCRec), fMCRecStorage, sizeof(fMCRecStorage)) |
| , fProps(props) |
| , fConservativeRasterClip(false) |
| { |
| inc_canvas(); |
| |
| sk_sp<SkBaseDevice> device(new SkBitmapDevice(bitmap, fProps)); |
| this->init(device.get(), kDefault_InitFlags); |
| } |
| |
| SkCanvas::SkCanvas(const SkBitmap& bitmap, std::unique_ptr<SkRasterHandleAllocator> alloc, |
| SkRasterHandleAllocator::Handle hndl) |
| : fMCStack(sizeof(MCRec), fMCRecStorage, sizeof(fMCRecStorage)) |
| , fProps(SkSurfaceProps::kLegacyFontHost_InitType) |
| , fAllocator(std::move(alloc)) |
| , fConservativeRasterClip(false) |
| { |
| inc_canvas(); |
| |
| sk_sp<SkBaseDevice> device(new SkBitmapDevice(bitmap, fProps, hndl)); |
| this->init(device.get(), kDefault_InitFlags); |
| } |
| |
| SkCanvas::SkCanvas(const SkBitmap& bitmap) : SkCanvas(bitmap, nullptr, nullptr) {} |
| |
| SkCanvas::~SkCanvas() { |
| // free up the contents of our deque |
| this->restoreToCount(1); // restore everything but the last |
| |
| this->internalRestore(); // restore the last, since we're going away |
| |
| delete fMetaData; |
| |
| dec_canvas(); |
| } |
| |
| #ifdef SK_SUPPORT_LEGACY_DRAWFILTER |
| SkDrawFilter* SkCanvas::getDrawFilter() const { |
| return fMCRec->fFilter; |
| } |
| |
| SkDrawFilter* SkCanvas::setDrawFilter(SkDrawFilter* filter) { |
| this->checkForDeferredSave(); |
| SkRefCnt_SafeAssign(fMCRec->fFilter, filter); |
| return filter; |
| } |
| #endif |
| |
| SkMetaData& SkCanvas::getMetaData() { |
| // metadata users are rare, so we lazily allocate it. If that changes we |
| // can decide to just make it a field in the device (rather than a ptr) |
| if (nullptr == fMetaData) { |
| fMetaData = new SkMetaData; |
| } |
| return *fMetaData; |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void SkCanvas::flush() { |
| this->onFlush(); |
| } |
| |
| void SkCanvas::onFlush() { |
| SkBaseDevice* device = this->getDevice(); |
| if (device) { |
| device->flush(); |
| } |
| } |
| |
| SkISize SkCanvas::getBaseLayerSize() const { |
| SkBaseDevice* d = this->getDevice(); |
| return d ? SkISize::Make(d->width(), d->height()) : SkISize::Make(0, 0); |
| } |
| |
| SkIRect SkCanvas::getTopLayerBounds() const { |
| SkBaseDevice* d = this->getTopDevice(); |
| if (!d) { |
| return SkIRect::MakeEmpty(); |
| } |
| return SkIRect::MakeXYWH(d->getOrigin().x(), d->getOrigin().y(), d->width(), d->height()); |
| } |
| |
| SkBaseDevice* SkCanvas::getDevice() const { |
| // return root device |
| MCRec* rec = (MCRec*) fMCStack.front(); |
| SkASSERT(rec && rec->fLayer); |
| return rec->fLayer->fDevice; |
| } |
| |
| SkBaseDevice* SkCanvas::getTopDevice() const { |
| return fMCRec->fTopLayer->fDevice; |
| } |
| |
| bool SkCanvas::readPixels(SkBitmap* bitmap, int x, int y) { |
| bool weAllocated = false; |
| if (nullptr == bitmap->pixelRef()) { |
| if (!bitmap->tryAllocPixels()) { |
| return false; |
| } |
| weAllocated = true; |
| } |
| |
| SkAutoPixmapUnlock unlocker; |
| if (bitmap->requestLock(&unlocker)) { |
| const SkPixmap& pm = unlocker.pixmap(); |
| if (this->readPixels(pm.info(), pm.writable_addr(), pm.rowBytes(), x, y)) { |
| return true; |
| } |
| } |
| |
| if (weAllocated) { |
| bitmap->setPixelRef(nullptr, 0, 0); |
| } |
| return false; |
| } |
| |
| bool SkCanvas::readPixels(const SkIRect& srcRect, SkBitmap* bitmap) { |
| SkIRect r = srcRect; |
| const SkISize size = this->getBaseLayerSize(); |
| if (!r.intersect(0, 0, size.width(), size.height())) { |
| bitmap->reset(); |
| return false; |
| } |
| |
| if (!bitmap->tryAllocN32Pixels(r.width(), r.height())) { |
| // bitmap will already be reset. |
| return false; |
| } |
| if (!this->readPixels(bitmap->info(), bitmap->getPixels(), bitmap->rowBytes(), r.x(), r.y())) { |
| bitmap->reset(); |
| return false; |
| } |
| return true; |
| } |
| |
| bool SkCanvas::readPixels(const SkImageInfo& dstInfo, void* dstP, size_t rowBytes, int x, int y) { |
| SkBaseDevice* device = this->getDevice(); |
| if (!device) { |
| return false; |
| } |
| |
| return device->readPixels(dstInfo, dstP, rowBytes, x, y); |
| } |
| |
| bool SkCanvas::writePixels(const SkBitmap& bitmap, int x, int y) { |
| SkAutoPixmapUnlock unlocker; |
| if (bitmap.requestLock(&unlocker)) { |
| const SkPixmap& pm = unlocker.pixmap(); |
| return this->writePixels(pm.info(), pm.addr(), pm.rowBytes(), x, y); |
| } |
| return false; |
| } |
| |
| bool SkCanvas::writePixels(const SkImageInfo& srcInfo, const void* pixels, size_t rowBytes, |
| int x, int y) { |
| SkBaseDevice* device = this->getDevice(); |
| if (!device) { |
| return false; |
| } |
| |
| // This check gives us an early out and prevents generation ID churn on the surface. |
| // This is purely optional: it is a subset of the checks performed by SkWritePixelsRec. |
| SkIRect srcRect = SkIRect::MakeXYWH(x, y, srcInfo.width(), srcInfo.height()); |
| if (!srcRect.intersect(0, 0, device->width(), device->height())) { |
| return false; |
| } |
| |
| // Tell our owning surface to bump its generation ID. |
| const bool completeOverwrite = |
| srcRect.size() == SkISize::Make(device->width(), device->height()); |
| this->predrawNotify(completeOverwrite); |
| |
| // This can still fail, most notably in the case of a invalid color type or alpha type |
| // conversion. We could pull those checks into this function and avoid the unnecessary |
| // generation ID bump. But then we would be performing those checks twice, since they |
| // are also necessary at the bitmap/pixmap entry points. |
| return device->writePixels(srcInfo, pixels, rowBytes, x, y); |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void SkCanvas::updateDeviceCMCache() { |
| if (fDeviceCMDirty) { |
| const SkMatrix& totalMatrix = this->getTotalMatrix(); |
| const SkRasterClip& totalClip = fMCRec->fRasterClip; |
| DeviceCM* layer = fMCRec->fTopLayer; |
| |
| if (nullptr == layer->fNext) { // only one layer |
| layer->updateMC(totalMatrix, totalClip, nullptr); |
| } else { |
| SkRasterClip clip(totalClip); |
| do { |
| layer->updateMC(totalMatrix, clip, &clip); |
| } while ((layer = layer->fNext) != nullptr); |
| } |
| fDeviceCMDirty = false; |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void SkCanvas::checkForDeferredSave() { |
| if (fMCRec->fDeferredSaveCount > 0) { |
| this->doSave(); |
| } |
| } |
| |
| int SkCanvas::getSaveCount() const { |
| #ifdef SK_DEBUG |
| int count = 0; |
| SkDeque::Iter iter(fMCStack, SkDeque::Iter::kFront_IterStart); |
| for (;;) { |
| const MCRec* rec = (const MCRec*)iter.next(); |
| if (!rec) { |
| break; |
| } |
| count += 1 + rec->fDeferredSaveCount; |
| } |
| SkASSERT(count == fSaveCount); |
| #endif |
| return fSaveCount; |
| } |
| |
| int SkCanvas::save() { |
| fSaveCount += 1; |
| fMCRec->fDeferredSaveCount += 1; |
| return this->getSaveCount() - 1; // return our prev value |
| } |
| |
| void SkCanvas::doSave() { |
| this->willSave(); |
| |
| SkASSERT(fMCRec->fDeferredSaveCount > 0); |
| fMCRec->fDeferredSaveCount -= 1; |
| this->internalSave(); |
| } |
| |
| void SkCanvas::restore() { |
| if (fMCRec->fDeferredSaveCount > 0) { |
| SkASSERT(fSaveCount > 1); |
| fSaveCount -= 1; |
| fMCRec->fDeferredSaveCount -= 1; |
| } else { |
| // check for underflow |
| if (fMCStack.count() > 1) { |
| this->willRestore(); |
| SkASSERT(fSaveCount > 1); |
| fSaveCount -= 1; |
| this->internalRestore(); |
| this->didRestore(); |
| } |
| } |
| } |
| |
| void SkCanvas::restoreToCount(int count) { |
| // sanity check |
| if (count < 1) { |
| count = 1; |
| } |
| |
| int n = this->getSaveCount() - count; |
| for (int i = 0; i < n; ++i) { |
| this->restore(); |
| } |
| } |
| |
| void SkCanvas::internalSave() { |
| MCRec* newTop = (MCRec*)fMCStack.push_back(); |
| new (newTop) MCRec(*fMCRec); // balanced in restore() |
| fMCRec = newTop; |
| |
| fClipStack->save(); |
| } |
| |
| bool SkCanvas::BoundsAffectsClip(SaveLayerFlags saveLayerFlags) { |
| return !(saveLayerFlags & SkCanvas::kDontClipToLayer_PrivateSaveLayerFlag); |
| } |
| |
| bool SkCanvas::clipRectBounds(const SkRect* bounds, SaveLayerFlags saveLayerFlags, |
| SkIRect* intersection, const SkImageFilter* imageFilter) { |
| SkIRect clipBounds = this->getDeviceClipBounds(); |
| if (clipBounds.isEmpty()) { |
| return false; |
| } |
| |
| const SkMatrix& ctm = fMCRec->fMatrix; // this->getTotalMatrix() |
| |
| if (imageFilter) { |
| clipBounds = imageFilter->filterBounds(clipBounds, ctm); |
| if (bounds && !imageFilter->canComputeFastBounds()) { |
| bounds = nullptr; |
| } |
| } |
| SkIRect ir; |
| if (bounds) { |
| SkRect r; |
| |
| ctm.mapRect(&r, *bounds); |
| r.roundOut(&ir); |
| // early exit if the layer's bounds are clipped out |
| if (!ir.intersect(clipBounds)) { |
| if (BoundsAffectsClip(saveLayerFlags)) { |
| fMCRec->fRasterClip.setEmpty(); |
| fDeviceClipBounds.setEmpty(); |
| } |
| return false; |
| } |
| } else { // no user bounds, so just use the clip |
| ir = clipBounds; |
| } |
| SkASSERT(!ir.isEmpty()); |
| |
| if (BoundsAffectsClip(saveLayerFlags)) { |
| // Simplify the current clips since they will be applied properly during restore() |
| fClipStack->clipDevRect(ir, kReplace_SkClipOp); |
| fMCRec->fRasterClip.setRect(ir); |
| fDeviceClipBounds = qr_clip_bounds(ir); |
| } |
| |
| if (intersection) { |
| *intersection = ir; |
| } |
| return true; |
| } |
| |
| |
| int SkCanvas::saveLayer(const SkRect* bounds, const SkPaint* paint) { |
| return this->saveLayer(SaveLayerRec(bounds, paint, 0)); |
| } |
| |
| int SkCanvas::saveLayerPreserveLCDTextRequests(const SkRect* bounds, const SkPaint* paint) { |
| return this->saveLayer(SaveLayerRec(bounds, paint, kPreserveLCDText_SaveLayerFlag)); |
| } |
| |
| int SkCanvas::saveLayer(const SaveLayerRec& origRec) { |
| SaveLayerRec rec(origRec); |
| if (gIgnoreSaveLayerBounds) { |
| rec.fBounds = nullptr; |
| } |
| SaveLayerStrategy strategy = this->getSaveLayerStrategy(rec); |
| fSaveCount += 1; |
| this->internalSaveLayer(rec, strategy); |
| return this->getSaveCount() - 1; |
| } |
| |
| void SkCanvas::DrawDeviceWithFilter(SkBaseDevice* src, const SkImageFilter* filter, |
| SkBaseDevice* dst, const SkMatrix& ctm, |
| const SkClipStack* clipStack) { |
| SkDraw draw; |
| SkRasterClip rc; |
| rc.setRect(SkIRect::MakeWH(dst->width(), dst->height())); |
| if (!dst->accessPixels(&draw.fDst)) { |
| draw.fDst.reset(dst->imageInfo(), nullptr, 0); |
| } |
| draw.fMatrix = &SkMatrix::I(); |
| draw.fRC = &rc; |
| draw.fClipStack = clipStack; |
| draw.fDevice = dst; |
| |
| SkPaint p; |
| p.setImageFilter(filter->makeWithLocalMatrix(ctm)); |
| |
| int x = src->getOrigin().x() - dst->getOrigin().x(); |
| int y = src->getOrigin().y() - dst->getOrigin().y(); |
| auto special = src->snapSpecial(); |
| if (special) { |
| dst->drawSpecial(draw, special.get(), x, y, p); |
| } |
| } |
| |
| static SkImageInfo make_layer_info(const SkImageInfo& prev, int w, int h, bool isOpaque, |
| const SkPaint* paint) { |
| // need to force L32 for now if we have an image filter. Once filters support other colortypes |
| // e.g. sRGB or F16, we can remove this check |
| // SRGBTODO: Can we remove this check now? |
| const bool hasImageFilter = paint && paint->getImageFilter(); |
| |
| SkAlphaType alphaType = isOpaque ? kOpaque_SkAlphaType : kPremul_SkAlphaType; |
| if ((prev.bytesPerPixel() < 4) || hasImageFilter) { |
| // force to L32 |
| return SkImageInfo::MakeN32(w, h, alphaType); |
| } else { |
| // keep the same characteristics as the prev |
| return SkImageInfo::Make(w, h, prev.colorType(), alphaType, prev.refColorSpace()); |
| } |
| } |
| |
| void SkCanvas::internalSaveLayer(const SaveLayerRec& rec, SaveLayerStrategy strategy) { |
| const SkRect* bounds = rec.fBounds; |
| const SkPaint* paint = rec.fPaint; |
| SaveLayerFlags saveLayerFlags = rec.fSaveLayerFlags; |
| |
| SkLazyPaint lazyP; |
| SkImageFilter* imageFilter = paint ? paint->getImageFilter() : NULL; |
| SkMatrix stashedMatrix = fMCRec->fMatrix; |
| SkMatrix remainder; |
| SkSize scale; |
| /* |
| * ImageFilters (so far) do not correctly handle matrices (CTM) that contain rotation/skew/etc. |
| * but they do handle scaling. To accommodate this, we do the following: |
| * |
| * 1. Stash off the current CTM |
| * 2. Decompose the CTM into SCALE and REMAINDER |
| * 3. Wack the CTM to be just SCALE, and wrap the imagefilter with a MatrixImageFilter that |
| * contains the REMAINDER |
| * 4. Proceed as usual, allowing the client to draw into the layer (now with a scale-only CTM) |
| * 5. During restore, we process the MatrixImageFilter, which applies REMAINDER to the output |
| * of the original imagefilter, and draw that (via drawSprite) |
| * 6. Unwack the CTM to its original state (i.e. stashedMatrix) |
| * |
| * Perhaps in the future we could augment #5 to apply REMAINDER as part of the draw (no longer |
| * a sprite operation) to avoid the extra buffer/overhead of MatrixImageFilter. |
| */ |
| if (imageFilter && !stashedMatrix.isScaleTranslate() && !imageFilter->canHandleComplexCTM() && |
| stashedMatrix.decomposeScale(&scale, &remainder)) |
| { |
| // We will restore the matrix (which we are overwriting here) in restore via fStashedMatrix |
| this->internalSetMatrix(SkMatrix::MakeScale(scale.width(), scale.height())); |
| SkPaint* p = lazyP.set(*paint); |
| p->setImageFilter(SkImageFilter::MakeMatrixFilter(remainder, |
| SkFilterQuality::kLow_SkFilterQuality, |
| sk_ref_sp(imageFilter))); |
| imageFilter = p->getImageFilter(); |
| paint = p; |
| } |
| |
| // do this before we create the layer. We don't call the public save() since |
| // that would invoke a possibly overridden virtual |
| this->internalSave(); |
| |
| fDeviceCMDirty = true; |
| |
| SkIRect ir; |
| if (!this->clipRectBounds(bounds, saveLayerFlags, &ir, imageFilter)) { |
| return; |
| } |
| |
| // FIXME: do willSaveLayer() overriders returning kNoLayer_SaveLayerStrategy really care about |
| // the clipRectBounds() call above? |
| if (kNoLayer_SaveLayerStrategy == strategy) { |
| return; |
| } |
| |
| bool isOpaque = SkToBool(saveLayerFlags & kIsOpaque_SaveLayerFlag); |
| SkPixelGeometry geo = fProps.pixelGeometry(); |
| if (paint) { |
| // TODO: perhaps add a query to filters so we might preserve opaqueness... |
| if (paint->getImageFilter() || paint->getColorFilter()) { |
| isOpaque = false; |
| geo = kUnknown_SkPixelGeometry; |
| } |
| } |
| |
| SkBaseDevice* priorDevice = this->getTopDevice(); |
| if (nullptr == priorDevice) { |
| SkDebugf("Unable to find device for layer."); |
| return; |
| } |
| |
| SkImageInfo info = make_layer_info(priorDevice->imageInfo(), ir.width(), ir.height(), isOpaque, |
| paint); |
| |
| sk_sp<SkBaseDevice> newDevice; |
| { |
| const bool preserveLCDText = kOpaque_SkAlphaType == info.alphaType() || |
| (saveLayerFlags & kPreserveLCDText_SaveLayerFlag); |
| const SkBaseDevice::TileUsage usage = SkBaseDevice::kNever_TileUsage; |
| const SkBaseDevice::CreateInfo createInfo = SkBaseDevice::CreateInfo(info, usage, geo, |
| preserveLCDText, |
| fAllocator.get()); |
| newDevice.reset(priorDevice->onCreateDevice(createInfo, paint)); |
| if (!newDevice) { |
| return; |
| } |
| } |
| newDevice->setOrigin(ir.fLeft, ir.fTop); |
| |
| DeviceCM* layer = |
| new DeviceCM(newDevice.get(), paint, this, fConservativeRasterClip, stashedMatrix); |
| |
| layer->fNext = fMCRec->fTopLayer; |
| fMCRec->fLayer = layer; |
| fMCRec->fTopLayer = layer; // this field is NOT an owner of layer |
| |
| if (rec.fBackdrop) { |
| DrawDeviceWithFilter(priorDevice, rec.fBackdrop, newDevice.get(), |
| fMCRec->fMatrix, this->getClipStack()); |
| } |
| } |
| |
| int SkCanvas::saveLayerAlpha(const SkRect* bounds, U8CPU alpha) { |
| if (0xFF == alpha) { |
| return this->saveLayer(bounds, nullptr); |
| } else { |
| SkPaint tmpPaint; |
| tmpPaint.setAlpha(alpha); |
| return this->saveLayer(bounds, &tmpPaint); |
| } |
| } |
| |
| void SkCanvas::internalRestore() { |
| SkASSERT(fMCStack.count() != 0); |
| |
| fDeviceCMDirty = true; |
| |
| fClipStack->restore(); |
| |
| // reserve our layer (if any) |
| DeviceCM* layer = fMCRec->fLayer; // may be null |
| // now detach it from fMCRec so we can pop(). Gets freed after its drawn |
| fMCRec->fLayer = nullptr; |
| |
| // now do the normal restore() |
| fMCRec->~MCRec(); // balanced in save() |
| fMCStack.pop_back(); |
| fMCRec = (MCRec*)fMCStack.back(); |
| |
| /* Time to draw the layer's offscreen. We can't call the public drawSprite, |
| since if we're being recorded, we don't want to record this (the |
| recorder will have already recorded the restore). |
| */ |
| if (layer) { |
| if (layer->fNext) { |
| const SkIPoint& origin = layer->fDevice->getOrigin(); |
| this->internalDrawDevice(layer->fDevice, origin.x(), origin.y(), layer->fPaint); |
| // restore what we smashed in internalSaveLayer |
| fMCRec->fMatrix = layer->fStashedMatrix; |
| // reset this, since internalDrawDevice will have set it to true |
| fDeviceCMDirty = true; |
| delete layer; |
| } else { |
| // we're at the root |
| SkASSERT(layer == (void*)fDeviceCMStorage); |
| layer->~DeviceCM(); |
| // no need to update fMCRec, 'cause we're killing the canvas |
| } |
| } |
| |
| if (fMCRec) { |
| fIsScaleTranslate = fMCRec->fMatrix.isScaleTranslate(); |
| fDeviceClipBounds = qr_clip_bounds(fMCRec->fRasterClip.getBounds()); |
| } |
| } |
| |
| sk_sp<SkSurface> SkCanvas::makeSurface(const SkImageInfo& info, const SkSurfaceProps* props) { |
| if (nullptr == props) { |
| props = &fProps; |
| } |
| return this->onNewSurface(info, *props); |
| } |
| |
| sk_sp<SkSurface> SkCanvas::onNewSurface(const SkImageInfo& info, const SkSurfaceProps& props) { |
| SkBaseDevice* dev = this->getDevice(); |
| return dev ? dev->makeSurface(info, props) : nullptr; |
| } |
| |
| SkImageInfo SkCanvas::imageInfo() const { |
| return this->onImageInfo(); |
| } |
| |
| SkImageInfo SkCanvas::onImageInfo() const { |
| SkBaseDevice* dev = this->getDevice(); |
| if (dev) { |
| return dev->imageInfo(); |
| } else { |
| return SkImageInfo::MakeUnknown(0, 0); |
| } |
| } |
| |
| bool SkCanvas::getProps(SkSurfaceProps* props) const { |
| return this->onGetProps(props); |
| } |
| |
| bool SkCanvas::onGetProps(SkSurfaceProps* props) const { |
| SkBaseDevice* dev = this->getDevice(); |
| if (dev) { |
| if (props) { |
| *props = fProps; |
| } |
| return true; |
| } else { |
| return false; |
| } |
| } |
| |
| bool SkCanvas::peekPixels(SkPixmap* pmap) { |
| return this->onPeekPixels(pmap); |
| } |
| |
| bool SkCanvas::onPeekPixels(SkPixmap* pmap) { |
| SkBaseDevice* dev = this->getDevice(); |
| return dev && dev->peekPixels(pmap); |
| } |
| |
| void* SkCanvas::accessTopLayerPixels(SkImageInfo* info, size_t* rowBytes, SkIPoint* origin) { |
| SkPixmap pmap; |
| if (!this->onAccessTopLayerPixels(&pmap)) { |
| return nullptr; |
| } |
| if (info) { |
| *info = pmap.info(); |
| } |
| if (rowBytes) { |
| *rowBytes = pmap.rowBytes(); |
| } |
| if (origin) { |
| *origin = this->getTopDevice()->getOrigin(); |
| } |
| return pmap.writable_addr(); |
| } |
| |
| bool SkCanvas::onAccessTopLayerPixels(SkPixmap* pmap) { |
| SkBaseDevice* dev = this->getTopDevice(); |
| return dev && dev->accessPixels(pmap); |
| } |
| |
| ///////////////////////////////////////////////////////////////////////////// |
| |
| void SkCanvas::internalDrawDevice(SkBaseDevice* srcDev, int x, int y, const SkPaint* paint) { |
| SkPaint tmp; |
| if (nullptr == paint) { |
| paint = &tmp; |
| } |
| |
| LOOPER_BEGIN_DRAWDEVICE(*paint, SkDrawFilter::kBitmap_Type) |
| |
| while (iter.next()) { |
| SkBaseDevice* dstDev = iter.fDevice; |
| paint = &looper.paint(); |
| SkImageFilter* filter = paint->getImageFilter(); |
| SkIPoint pos = { x - iter.getX(), y - iter.getY() }; |
| if (filter) { |
| sk_sp<SkSpecialImage> specialImage = srcDev->snapSpecial(); |
| if (specialImage) { |
| dstDev->drawSpecial(iter, specialImage.get(), pos.x(), pos.y(), *paint); |
| } |
| } else { |
| dstDev->drawDevice(iter, srcDev, pos.x(), pos.y(), *paint); |
| } |
| } |
| |
| LOOPER_END |
| } |
| |
| ///////////////////////////////////////////////////////////////////////////// |
| |
| void SkCanvas::translate(SkScalar dx, SkScalar dy) { |
| if (dx || dy) { |
| this->checkForDeferredSave(); |
| fDeviceCMDirty = true; |
| fMCRec->fMatrix.preTranslate(dx,dy); |
| |
| // Translate shouldn't affect the is-scale-translateness of the matrix. |
| SkASSERT(fIsScaleTranslate == fMCRec->fMatrix.isScaleTranslate()); |
| |
| this->didTranslate(dx,dy); |
| } |
| } |
| |
| void SkCanvas::scale(SkScalar sx, SkScalar sy) { |
| SkMatrix m; |
| m.setScale(sx, sy); |
| this->concat(m); |
| } |
| |
| void SkCanvas::rotate(SkScalar degrees) { |
| SkMatrix m; |
| m.setRotate(degrees); |
| this->concat(m); |
| } |
| |
| void SkCanvas::rotate(SkScalar degrees, SkScalar px, SkScalar py) { |
| SkMatrix m; |
| m.setRotate(degrees, px, py); |
| this->concat(m); |
| } |
| |
| void SkCanvas::skew(SkScalar sx, SkScalar sy) { |
| SkMatrix m; |
| m.setSkew(sx, sy); |
| this->concat(m); |
| } |
| |
| void SkCanvas::concat(const SkMatrix& matrix) { |
| if (matrix.isIdentity()) { |
| return; |
| } |
| |
| this->checkForDeferredSave(); |
| fDeviceCMDirty = true; |
| fMCRec->fMatrix.preConcat(matrix); |
| fIsScaleTranslate = fMCRec->fMatrix.isScaleTranslate(); |
| this->didConcat(matrix); |
| } |
| |
| void SkCanvas::internalSetMatrix(const SkMatrix& matrix) { |
| fDeviceCMDirty = true; |
| fMCRec->fMatrix = matrix; |
| fIsScaleTranslate = matrix.isScaleTranslate(); |
| } |
| |
| void SkCanvas::setMatrix(const SkMatrix& matrix) { |
| this->checkForDeferredSave(); |
| this->internalSetMatrix(matrix); |
| this->didSetMatrix(matrix); |
| } |
| |
| void SkCanvas::resetMatrix() { |
| this->setMatrix(SkMatrix::I()); |
| } |
| |
| #ifdef SK_EXPERIMENTAL_SHADOWING |
| void SkCanvas::translateZ(SkScalar z) { |
| this->checkForDeferredSave(); |
| this->fMCRec->fCurDrawDepth += z; |
| this->didTranslateZ(z); |
| } |
| |
| SkScalar SkCanvas::getZ() const { |
| return this->fMCRec->fCurDrawDepth; |
| } |
| |
| void SkCanvas::setLights(sk_sp<SkLights> lights) { |
| this->fLights = lights; |
| } |
| |
| sk_sp<SkLights> SkCanvas::getLights() const { |
| return this->fLights; |
| } |
| #endif |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void SkCanvas::clipRect(const SkRect& rect, SkClipOp op, bool doAA) { |
| this->checkForDeferredSave(); |
| ClipEdgeStyle edgeStyle = doAA ? kSoft_ClipEdgeStyle : kHard_ClipEdgeStyle; |
| this->onClipRect(rect, op, edgeStyle); |
| } |
| |
| void SkCanvas::onClipRect(const SkRect& rect, SkClipOp op, ClipEdgeStyle edgeStyle) { |
| const bool isAA = kSoft_ClipEdgeStyle == edgeStyle; |
| AutoValidateClip avc(this); |
| fClipStack->clipRect(rect, fMCRec->fMatrix, op, isAA); |
| fMCRec->fRasterClip.op(rect, fMCRec->fMatrix, this->getTopLayerBounds(), (SkRegion::Op)op, |
| isAA); |
| fDeviceCMDirty = true; |
| fDeviceClipBounds = qr_clip_bounds(fMCRec->fRasterClip.getBounds()); |
| } |
| |
| void SkCanvas::androidFramework_setDeviceClipRestriction(const SkIRect& rect) { |
| fClipRestrictionRect = rect; |
| fClipStack->setDeviceClipRestriction(fClipRestrictionRect); |
| if (!fClipRestrictionRect.isEmpty()) { |
| this->checkForDeferredSave(); |
| AutoValidateClip avc(this); |
| fClipStack->clipDevRect(fClipRestrictionRect, kIntersect_SkClipOp); |
| fMCRec->fRasterClip.op(fClipRestrictionRect, SkRegion::kIntersect_Op); |
| fDeviceCMDirty = true; |
| fDeviceClipBounds = qr_clip_bounds(fMCRec->fRasterClip.getBounds()); |
| } |
| } |
| |
| void SkCanvas::clipRRect(const SkRRect& rrect, SkClipOp op, bool doAA) { |
| this->checkForDeferredSave(); |
| ClipEdgeStyle edgeStyle = doAA ? kSoft_ClipEdgeStyle : kHard_ClipEdgeStyle; |
| if (rrect.isRect()) { |
| this->onClipRect(rrect.getBounds(), op, edgeStyle); |
| } else { |
| this->onClipRRect(rrect, op, edgeStyle); |
| } |
| } |
| |
| void SkCanvas::onClipRRect(const SkRRect& rrect, SkClipOp op, ClipEdgeStyle edgeStyle) { |
| AutoValidateClip avc(this); |
| |
| fDeviceCMDirty = true; |
| |
| bool isAA = kSoft_ClipEdgeStyle == edgeStyle; |
| fClipStack->clipRRect(rrect, fMCRec->fMatrix, op, isAA); |
| fMCRec->fRasterClip.op(rrect, fMCRec->fMatrix, this->getTopLayerBounds(), (SkRegion::Op)op, |
| isAA); |
| fDeviceClipBounds = qr_clip_bounds(fMCRec->fRasterClip.getBounds()); |
| return; |
| } |
| |
| void SkCanvas::clipPath(const SkPath& path, SkClipOp op, bool doAA) { |
| this->checkForDeferredSave(); |
| ClipEdgeStyle edgeStyle = doAA ? kSoft_ClipEdgeStyle : kHard_ClipEdgeStyle; |
| |
| if (!path.isInverseFillType() && fMCRec->fMatrix.rectStaysRect()) { |
| SkRect r; |
| if (path.isRect(&r)) { |
| this->onClipRect(r, op, edgeStyle); |
| return; |
| } |
| SkRRect rrect; |
| if (path.isOval(&r)) { |
| rrect.setOval(r); |
| this->onClipRRect(rrect, op, edgeStyle); |
| return; |
| } |
| if (path.isRRect(&rrect)) { |
| this->onClipRRect(rrect, op, edgeStyle); |
| return; |
| } |
| } |
| |
| this->onClipPath(path, op, edgeStyle); |
| } |
| |
| void SkCanvas::onClipPath(const SkPath& path, SkClipOp op, ClipEdgeStyle edgeStyle) { |
| AutoValidateClip avc(this); |
| |
| fDeviceCMDirty = true; |
| bool isAA = kSoft_ClipEdgeStyle == edgeStyle; |
| |
| fClipStack->clipPath(path, fMCRec->fMatrix, op, isAA); |
| |
| const SkPath* rasterClipPath = &path; |
| const SkMatrix* matrix = &fMCRec->fMatrix; |
| SkPath tempPath; |
| if (fAllowSimplifyClip) { |
| isAA = getClipStack()->asPath(&tempPath); |
| rasterClipPath = &tempPath; |
| matrix = &SkMatrix::I(); |
| op = kReplace_SkClipOp; |
| } |
| fMCRec->fRasterClip.op(*rasterClipPath, *matrix, this->getTopLayerBounds(), (SkRegion::Op)op, |
| isAA); |
| fDeviceClipBounds = qr_clip_bounds(fMCRec->fRasterClip.getBounds()); |
| } |
| |
| void SkCanvas::clipRegion(const SkRegion& rgn, SkClipOp op) { |
| this->checkForDeferredSave(); |
| this->onClipRegion(rgn, op); |
| } |
| |
| void SkCanvas::onClipRegion(const SkRegion& rgn, SkClipOp op) { |
| AutoValidateClip avc(this); |
| |
| fDeviceCMDirty = true; |
| |
| // todo: signal fClipStack that we have a region, and therefore (I guess) |
| // we have to ignore it, and use the region directly? |
| fClipStack->clipDevRect(rgn.getBounds(), op); |
| |
| fMCRec->fRasterClip.op(rgn, (SkRegion::Op)op); |
| fDeviceClipBounds = qr_clip_bounds(fMCRec->fRasterClip.getBounds()); |
| } |
| |
| #ifdef SK_DEBUG |
| void SkCanvas::validateClip() const { |
| // construct clipRgn from the clipstack |
| const SkBaseDevice* device = this->getDevice(); |
| if (!device) { |
| SkASSERT(this->isClipEmpty()); |
| return; |
| } |
| |
| SkIRect ir; |
| ir.set(0, 0, device->width(), device->height()); |
| SkRasterClip tmpClip(ir, fConservativeRasterClip); |
| |
| SkClipStack::B2TIter iter(*fClipStack); |
| const SkClipStack::Element* element; |
| while ((element = iter.next()) != nullptr) { |
| switch (element->getType()) { |
| case SkClipStack::Element::kRect_Type: |
| element->getRect().round(&ir); |
| tmpClip.op(ir, (SkRegion::Op)element->getOp()); |
| break; |
| case SkClipStack::Element::kEmpty_Type: |
| tmpClip.setEmpty(); |
| break; |
| default: { |
| SkPath path; |
| element->asPath(&path); |
| tmpClip.op(path, SkMatrix::I(), this->getTopLayerBounds(), |
| (SkRegion::Op)element->getOp(), element->isAA()); |
| break; |
| } |
| } |
| } |
| } |
| #endif |
| |
| void SkCanvas::replayClips(ClipVisitor* visitor) const { |
| SkClipStack::B2TIter iter(*fClipStack); |
| const SkClipStack::Element* element; |
| |
| while ((element = iter.next()) != nullptr) { |
| element->replay(visitor); |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| bool SkCanvas::isClipEmpty() const { |
| return fMCRec->fRasterClip.isEmpty(); |
| } |
| |
| bool SkCanvas::isClipRect() const { |
| return fMCRec->fRasterClip.isRect(); |
| } |
| |
| static inline bool is_nan_or_clipped(const Sk4f& devRect, const Sk4f& devClip) { |
| #if !defined(SKNX_NO_SIMD) && SK_CPU_SSE_LEVEL >= SK_CPU_SSE_LEVEL_SSE2 |
| __m128 lLtT = _mm_unpacklo_ps(devRect.fVec, devClip.fVec); |
| __m128 RrBb = _mm_unpackhi_ps(devClip.fVec, devRect.fVec); |
| __m128 mask = _mm_cmplt_ps(lLtT, RrBb); |
| return 0xF != _mm_movemask_ps(mask); |
| #elif !defined(SKNX_NO_SIMD) && defined(SK_ARM_HAS_NEON) |
| float32x4_t lLtT = vzipq_f32(devRect.fVec, devClip.fVec).val[0]; |
| float32x4_t RrBb = vzipq_f32(devClip.fVec, devRect.fVec).val[1]; |
| uint32x4_t mask = vcltq_f32(lLtT, RrBb); |
| return 0xFFFFFFFFFFFFFFFF != (uint64_t) vmovn_u32(mask); |
| #else |
| SkRect devRectAsRect; |
| SkRect devClipAsRect; |
| devRect.store(&devRectAsRect.fLeft); |
| devClip.store(&devClipAsRect.fLeft); |
| return !devRectAsRect.isFinite() || !devRectAsRect.intersect(devClipAsRect); |
| #endif |
| } |
| |
| // It's important for this function to not be inlined. Otherwise the compiler will share code |
| // between the fast path and the slow path, resulting in two slow paths. |
| static SK_NEVER_INLINE bool quick_reject_slow_path(const SkRect& src, const SkRect& deviceClip, |
| const SkMatrix& matrix) { |
| SkRect deviceRect; |
| matrix.mapRect(&deviceRect, src); |
| return !deviceRect.isFinite() || !deviceRect.intersect(deviceClip); |
| } |
| |
| bool SkCanvas::quickReject(const SkRect& src) const { |
| #ifdef SK_DEBUG |
| // Verify that fDeviceClipBounds are set properly. |
| SkRect tmp = qr_clip_bounds(fMCRec->fRasterClip.getBounds()); |
| if (fMCRec->fRasterClip.isEmpty()) { |
| SkASSERT(fDeviceClipBounds.isEmpty()); |
| } else { |
| SkASSERT(tmp == fDeviceClipBounds); |
| } |
| |
| // Verify that fIsScaleTranslate is set properly. |
| SkASSERT(fIsScaleTranslate == fMCRec->fMatrix.isScaleTranslate()); |
| #endif |
| |
| if (!fIsScaleTranslate) { |
| return quick_reject_slow_path(src, fDeviceClipBounds, fMCRec->fMatrix); |
| } |
| |
| // We inline the implementation of mapScaleTranslate() for the fast path. |
| float sx = fMCRec->fMatrix.getScaleX(); |
| float sy = fMCRec->fMatrix.getScaleY(); |
| float tx = fMCRec->fMatrix.getTranslateX(); |
| float ty = fMCRec->fMatrix.getTranslateY(); |
| Sk4f scale(sx, sy, sx, sy); |
| Sk4f trans(tx, ty, tx, ty); |
| |
| // Apply matrix. |
| Sk4f ltrb = Sk4f::Load(&src.fLeft) * scale + trans; |
| |
| // Make sure left < right, top < bottom. |
| Sk4f rblt(ltrb[2], ltrb[3], ltrb[0], ltrb[1]); |
| Sk4f min = Sk4f::Min(ltrb, rblt); |
| Sk4f max = Sk4f::Max(ltrb, rblt); |
| // We can extract either pair [0,1] or [2,3] from min and max and be correct, but on |
| // ARM this sequence generates the fastest (a single instruction). |
| Sk4f devRect = Sk4f(min[2], min[3], max[0], max[1]); |
| |
| // Check if the device rect is NaN or outside the clip. |
| return is_nan_or_clipped(devRect, Sk4f::Load(&fDeviceClipBounds.fLeft)); |
| } |
| |
| bool SkCanvas::quickReject(const SkPath& path) const { |
| return path.isEmpty() || this->quickReject(path.getBounds()); |
| } |
| |
| bool SkCanvas::getClipBounds(SkRect* bounds) const { |
| SkIRect ibounds = this->getDeviceClipBounds(); |
| if (ibounds.isEmpty()) { |
| if (bounds) { |
| bounds->setEmpty(); |
| } |
| return false; |
| } |
| |
| SkMatrix inverse; |
| // if we can't invert the CTM, we can't return local clip bounds |
| if (!fMCRec->fMatrix.invert(&inverse)) { |
| if (bounds) { |
| bounds->setEmpty(); |
| } |
| return false; |
| } |
| |
| if (bounds) { |
| SkRect r; |
| // adjust it outwards in case we are antialiasing |
| const int inset = 1; |
| |
| r.iset(ibounds.fLeft - inset, ibounds.fTop - inset, |
| ibounds.fRight + inset, ibounds.fBottom + inset); |
| inverse.mapRect(bounds, r); |
| } |
| return true; |
| } |
| |
| bool SkCanvas::getClipDeviceBounds(SkIRect* bounds) const { |
| const SkRasterClip& clip = fMCRec->fRasterClip; |
| if (clip.isEmpty()) { |
| if (bounds) { |
| bounds->setEmpty(); |
| } |
| return false; |
| } |
| |
| if (bounds) { |
| *bounds = clip.getBounds(); |
| } |
| return true; |
| } |
| |
| const SkMatrix& SkCanvas::getTotalMatrix() const { |
| return fMCRec->fMatrix; |
| } |
| |
| void SkCanvas::temporary_internal_getRgnClip(SkRegion* rgn) { |
| // we know that ganesh doesn't track the rgn, so ask for its clipstack |
| if (this->getGrContext()) { |
| SkPath path; |
| this->getClipStack()->asPath(&path); |
| SkISize size = this->getBaseLayerSize(); |
| rgn->setPath(path, SkRegion(SkIRect::MakeWH(size.width(), size.height()))); |
| } else { |
| *rgn = fMCRec->fRasterClip.forceGetBW(); |
| } |
| } |
| |
| GrRenderTargetContext* SkCanvas::internal_private_accessTopLayerRenderTargetContext() { |
| SkBaseDevice* dev = this->getTopDevice(); |
| return dev ? dev->accessRenderTargetContext() : nullptr; |
| } |
| |
| GrContext* SkCanvas::getGrContext() { |
| SkBaseDevice* device = this->getTopDevice(); |
| return device ? device->context() : nullptr; |
| } |
| |
| void SkCanvas::drawDRRect(const SkRRect& outer, const SkRRect& inner, |
| const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawDRRect()"); |
| if (outer.isEmpty()) { |
| return; |
| } |
| if (inner.isEmpty()) { |
| this->drawRRect(outer, paint); |
| return; |
| } |
| |
| // We don't have this method (yet), but technically this is what we should |
| // be able to assert... |
| // SkASSERT(outer.contains(inner)); |
| // |
| // For now at least check for containment of bounds |
| SkASSERT(outer.getBounds().contains(inner.getBounds())); |
| |
| this->onDrawDRRect(outer, inner, paint); |
| } |
| |
| // These need to stop being virtual -- clients need to override the onDraw... versions |
| |
| void SkCanvas::drawPaint(const SkPaint& paint) { |
| this->onDrawPaint(paint); |
| } |
| |
| void SkCanvas::drawRect(const SkRect& r, const SkPaint& paint) { |
| this->onDrawRect(r, paint); |
| } |
| |
| void SkCanvas::drawRegion(const SkRegion& region, const SkPaint& paint) { |
| if (region.isEmpty()) { |
| return; |
| } |
| |
| if (region.isRect()) { |
| return this->drawIRect(region.getBounds(), paint); |
| } |
| |
| this->onDrawRegion(region, paint); |
| } |
| |
| void SkCanvas::drawOval(const SkRect& r, const SkPaint& paint) { |
| this->onDrawOval(r, paint); |
| } |
| |
| void SkCanvas::drawRRect(const SkRRect& rrect, const SkPaint& paint) { |
| this->onDrawRRect(rrect, paint); |
| } |
| |
| void SkCanvas::drawPoints(PointMode mode, size_t count, const SkPoint pts[], const SkPaint& paint) { |
| this->onDrawPoints(mode, count, pts, paint); |
| } |
| |
| void SkCanvas::drawVertices(VertexMode vmode, int vertexCount, const SkPoint vertices[], |
| const SkPoint texs[], const SkColor colors[], SkBlendMode bmode, |
| const uint16_t indices[], int indexCount, const SkPaint& paint) { |
| this->onDrawVertices(vmode, vertexCount, vertices, texs, colors, bmode, |
| indices, indexCount, paint); |
| } |
| |
| void SkCanvas::drawPath(const SkPath& path, const SkPaint& paint) { |
| this->onDrawPath(path, paint); |
| } |
| |
| void SkCanvas::drawImage(const SkImage* image, SkScalar x, SkScalar y, const SkPaint* paint) { |
| RETURN_ON_NULL(image); |
| this->onDrawImage(image, x, y, paint); |
| } |
| |
| void SkCanvas::drawImageRect(const SkImage* image, const SkRect& src, const SkRect& dst, |
| const SkPaint* paint, SrcRectConstraint constraint) { |
| RETURN_ON_NULL(image); |
| if (dst.isEmpty() || src.isEmpty()) { |
| return; |
| } |
| this->onDrawImageRect(image, &src, dst, paint, constraint); |
| } |
| |
| void SkCanvas::drawImageRect(const SkImage* image, const SkIRect& isrc, const SkRect& dst, |
| const SkPaint* paint, SrcRectConstraint constraint) { |
| RETURN_ON_NULL(image); |
| this->drawImageRect(image, SkRect::Make(isrc), dst, paint, constraint); |
| } |
| |
| void SkCanvas::drawImageRect(const SkImage* image, const SkRect& dst, const SkPaint* paint, |
| SrcRectConstraint constraint) { |
| RETURN_ON_NULL(image); |
| this->drawImageRect(image, SkRect::MakeIWH(image->width(), image->height()), dst, paint, |
| constraint); |
| } |
| |
| void SkCanvas::drawImageNine(const SkImage* image, const SkIRect& center, const SkRect& dst, |
| const SkPaint* paint) { |
| RETURN_ON_NULL(image); |
| if (dst.isEmpty()) { |
| return; |
| } |
| if (SkLatticeIter::Valid(image->width(), image->height(), center)) { |
| this->onDrawImageNine(image, center, dst, paint); |
| } else { |
| this->drawImageRect(image, dst, paint); |
| } |
| } |
| |
| void SkCanvas::drawImageLattice(const SkImage* image, const Lattice& lattice, const SkRect& dst, |
| const SkPaint* paint) { |
| RETURN_ON_NULL(image); |
| if (dst.isEmpty()) { |
| return; |
| } |
| |
| SkIRect bounds; |
| Lattice latticePlusBounds = lattice; |
| if (!latticePlusBounds.fBounds) { |
| bounds = SkIRect::MakeWH(image->width(), image->height()); |
| latticePlusBounds.fBounds = &bounds; |
| } |
| |
| if (SkLatticeIter::Valid(image->width(), image->height(), latticePlusBounds)) { |
| this->onDrawImageLattice(image, latticePlusBounds, dst, paint); |
| } else { |
| this->drawImageRect(image, dst, paint); |
| } |
| } |
| |
| void SkCanvas::drawBitmap(const SkBitmap& bitmap, SkScalar dx, SkScalar dy, const SkPaint* paint) { |
| if (bitmap.drawsNothing()) { |
| return; |
| } |
| this->onDrawBitmap(bitmap, dx, dy, paint); |
| } |
| |
| void SkCanvas::drawBitmapRect(const SkBitmap& bitmap, const SkRect& src, const SkRect& dst, |
| const SkPaint* paint, SrcRectConstraint constraint) { |
| if (bitmap.drawsNothing() || dst.isEmpty() || src.isEmpty()) { |
| return; |
| } |
| this->onDrawBitmapRect(bitmap, &src, dst, paint, constraint); |
| } |
| |
| void SkCanvas::drawBitmapRect(const SkBitmap& bitmap, const SkIRect& isrc, const SkRect& dst, |
| const SkPaint* paint, SrcRectConstraint constraint) { |
| this->drawBitmapRect(bitmap, SkRect::Make(isrc), dst, paint, constraint); |
| } |
| |
| void SkCanvas::drawBitmapRect(const SkBitmap& bitmap, const SkRect& dst, const SkPaint* paint, |
| SrcRectConstraint constraint) { |
| this->drawBitmapRect(bitmap, SkRect::MakeIWH(bitmap.width(), bitmap.height()), dst, paint, |
| constraint); |
| } |
| |
| void SkCanvas::drawBitmapNine(const SkBitmap& bitmap, const SkIRect& center, const SkRect& dst, |
| const SkPaint* paint) { |
| if (bitmap.drawsNothing() || dst.isEmpty()) { |
| return; |
| } |
| if (SkLatticeIter::Valid(bitmap.width(), bitmap.height(), center)) { |
| this->onDrawBitmapNine(bitmap, center, dst, paint); |
| } else { |
| this->drawBitmapRect(bitmap, dst, paint); |
| } |
| } |
| |
| void SkCanvas::drawBitmapLattice(const SkBitmap& bitmap, const Lattice& lattice, const SkRect& dst, |
| const SkPaint* paint) { |
| if (bitmap.drawsNothing() || dst.isEmpty()) { |
| return; |
| } |
| |
| SkIRect bounds; |
| Lattice latticePlusBounds = lattice; |
| if (!latticePlusBounds.fBounds) { |
| bounds = SkIRect::MakeWH(bitmap.width(), bitmap.height()); |
| latticePlusBounds.fBounds = &bounds; |
| } |
| |
| if (SkLatticeIter::Valid(bitmap.width(), bitmap.height(), latticePlusBounds)) { |
| this->onDrawBitmapLattice(bitmap, latticePlusBounds, dst, paint); |
| } else { |
| this->drawBitmapRect(bitmap, dst, paint); |
| } |
| } |
| |
| void SkCanvas::drawAtlas(const SkImage* atlas, const SkRSXform xform[], const SkRect tex[], |
| const SkColor colors[], int count, SkBlendMode mode, |
| const SkRect* cull, const SkPaint* paint) { |
| RETURN_ON_NULL(atlas); |
| if (count <= 0) { |
| return; |
| } |
| SkASSERT(atlas); |
| SkASSERT(tex); |
| this->onDrawAtlas(atlas, xform, tex, colors, count, mode, cull, paint); |
| } |
| |
| void SkCanvas::drawAnnotation(const SkRect& rect, const char key[], SkData* value) { |
| if (key) { |
| this->onDrawAnnotation(rect, key, value); |
| } |
| } |
| |
| void SkCanvas::legacy_drawImageRect(const SkImage* image, const SkRect* src, const SkRect& dst, |
| const SkPaint* paint, SrcRectConstraint constraint) { |
| if (src) { |
| this->drawImageRect(image, *src, dst, paint, constraint); |
| } else { |
| this->drawImageRect(image, SkRect::MakeIWH(image->width(), image->height()), |
| dst, paint, constraint); |
| } |
| } |
| void SkCanvas::legacy_drawBitmapRect(const SkBitmap& bitmap, const SkRect* src, const SkRect& dst, |
| const SkPaint* paint, SrcRectConstraint constraint) { |
| if (src) { |
| this->drawBitmapRect(bitmap, *src, dst, paint, constraint); |
| } else { |
| this->drawBitmapRect(bitmap, SkRect::MakeIWH(bitmap.width(), bitmap.height()), |
| dst, paint, constraint); |
| } |
| } |
| |
| void SkCanvas::temporary_internal_describeTopLayer(SkMatrix* matrix, SkIRect* clip_bounds) { |
| SkIRect layer_bounds = this->getTopLayerBounds(); |
| if (matrix) { |
| *matrix = this->getTotalMatrix(); |
| matrix->preTranslate(-layer_bounds.left(), -layer_bounds.top()); |
| } |
| if (clip_bounds) { |
| *clip_bounds = this->getDeviceClipBounds(); |
| clip_bounds->offset(-layer_bounds.left(), -layer_bounds.top()); |
| } |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| // These are the virtual drawing methods |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void SkCanvas::onDiscard() { |
| if (fSurfaceBase) { |
| fSurfaceBase->aboutToDraw(SkSurface::kDiscard_ContentChangeMode); |
| } |
| } |
| |
| void SkCanvas::onDrawPaint(const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawPaint()"); |
| this->internalDrawPaint(paint); |
| } |
| |
| void SkCanvas::internalDrawPaint(const SkPaint& paint) { |
| LOOPER_BEGIN_CHECK_COMPLETE_OVERWRITE(paint, SkDrawFilter::kPaint_Type, nullptr, false) |
| |
| while (iter.next()) { |
| iter.fDevice->drawPaint(iter, looper.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawPoints(PointMode mode, size_t count, const SkPoint pts[], |
| const SkPaint& paint) { |
| TRACE_EVENT1("disabled-by-default-skia", "SkCanvas::drawPoints()", "count", static_cast<uint64_t>(count)); |
| if ((long)count <= 0) { |
| return; |
| } |
| |
| SkRect r, storage; |
| const SkRect* bounds = nullptr; |
| if (paint.canComputeFastBounds()) { |
| // special-case 2 points (common for drawing a single line) |
| if (2 == count) { |
| r.set(pts[0], pts[1]); |
| } else { |
| r.set(pts, SkToInt(count)); |
| } |
| if (this->quickReject(paint.computeFastStrokeBounds(r, &storage))) { |
| return; |
| } |
| bounds = &r; |
| } |
| |
| SkASSERT(pts != nullptr); |
| |
| LOOPER_BEGIN(paint, SkDrawFilter::kPoint_Type, bounds) |
| |
| while (iter.next()) { |
| iter.fDevice->drawPoints(iter, mode, count, pts, looper.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| static bool needs_autodrawlooper(SkCanvas* canvas, const SkPaint& paint) { |
| return ((intptr_t)paint.getImageFilter() | |
| #ifdef SK_SUPPORT_LEGACY_DRAWFILTER |
| (intptr_t)canvas->getDrawFilter() | |
| #endif |
| (intptr_t)paint.getLooper() ) != 0; |
| } |
| |
| void SkCanvas::onDrawRect(const SkRect& r, const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawRect()"); |
| SkRect storage; |
| const SkRect* bounds = nullptr; |
| if (paint.canComputeFastBounds()) { |
| // Skia will draw an inverted rect, because it explicitly "sorts" it downstream. |
| // To prevent accidental rejecting at this stage, we have to sort it before we check. |
| SkRect tmp(r); |
| tmp.sort(); |
| |
| if (this->quickReject(paint.computeFastBounds(tmp, &storage))) { |
| return; |
| } |
| bounds = &r; |
| } |
| |
| if (needs_autodrawlooper(this, paint)) { |
| LOOPER_BEGIN_CHECK_COMPLETE_OVERWRITE(paint, SkDrawFilter::kRect_Type, bounds, false) |
| |
| while (iter.next()) { |
| iter.fDevice->drawRect(iter, r, looper.paint()); |
| } |
| |
| LOOPER_END |
| } else { |
| this->predrawNotify(bounds, &paint, false); |
| SkDrawIter iter(this); |
| while (iter.next()) { |
| iter.fDevice->drawRect(iter, r, paint); |
| } |
| } |
| } |
| |
| void SkCanvas::onDrawRegion(const SkRegion& region, const SkPaint& paint) { |
| SkRect storage; |
| SkRect regionRect = SkRect::Make(region.getBounds()); |
| const SkRect* bounds = nullptr; |
| if (paint.canComputeFastBounds()) { |
| if (this->quickReject(paint.computeFastBounds(regionRect, &storage))) { |
| return; |
| } |
| bounds = ®ionRect; |
| } |
| |
| LOOPER_BEGIN(paint, SkDrawFilter::kRect_Type, bounds) |
| |
| while (iter.next()) { |
| iter.fDevice->drawRegion(iter, region, looper.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawOval(const SkRect& oval, const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawOval()"); |
| SkRect storage; |
| const SkRect* bounds = nullptr; |
| if (paint.canComputeFastBounds()) { |
| if (this->quickReject(paint.computeFastBounds(oval, &storage))) { |
| return; |
| } |
| bounds = &oval; |
| } |
| |
| LOOPER_BEGIN(paint, SkDrawFilter::kOval_Type, bounds) |
| |
| while (iter.next()) { |
| iter.fDevice->drawOval(iter, oval, looper.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawArc(const SkRect& oval, SkScalar startAngle, |
| SkScalar sweepAngle, bool useCenter, |
| const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawArc()"); |
| const SkRect* bounds = nullptr; |
| if (paint.canComputeFastBounds()) { |
| SkRect storage; |
| // Note we're using the entire oval as the bounds. |
| if (this->quickReject(paint.computeFastBounds(oval, &storage))) { |
| return; |
| } |
| bounds = &oval; |
| } |
| |
| LOOPER_BEGIN(paint, SkDrawFilter::kOval_Type, bounds) |
| |
| while (iter.next()) { |
| iter.fDevice->drawArc(iter, oval, startAngle, sweepAngle, useCenter, looper.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawRRect(const SkRRect& rrect, const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawRRect()"); |
| SkRect storage; |
| const SkRect* bounds = nullptr; |
| if (paint.canComputeFastBounds()) { |
| if (this->quickReject(paint.computeFastBounds(rrect.getBounds(), &storage))) { |
| return; |
| } |
| bounds = &rrect.getBounds(); |
| } |
| |
| if (rrect.isRect()) { |
| // call the non-virtual version |
| this->SkCanvas::drawRect(rrect.getBounds(), paint); |
| return; |
| } else if (rrect.isOval()) { |
| // call the non-virtual version |
| this->SkCanvas::drawOval(rrect.getBounds(), paint); |
| return; |
| } |
| |
| LOOPER_BEGIN(paint, SkDrawFilter::kRRect_Type, bounds) |
| |
| while (iter.next()) { |
| iter.fDevice->drawRRect(iter, rrect, looper.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawDRRect(const SkRRect& outer, const SkRRect& inner, |
| const SkPaint& paint) { |
| SkRect storage; |
| const SkRect* bounds = nullptr; |
| if (paint.canComputeFastBounds()) { |
| if (this->quickReject(paint.computeFastBounds(outer.getBounds(), &storage))) { |
| return; |
| } |
| bounds = &outer.getBounds(); |
| } |
| |
| LOOPER_BEGIN(paint, SkDrawFilter::kRRect_Type, bounds) |
| |
| while (iter.next()) { |
| iter.fDevice->drawDRRect(iter, outer, inner, looper.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawPath(const SkPath& path, const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawPath()"); |
| if (!path.isFinite()) { |
| return; |
| } |
| |
| SkRect storage; |
| const SkRect* bounds = nullptr; |
| if (!path.isInverseFillType() && paint.canComputeFastBounds()) { |
| const SkRect& pathBounds = path.getBounds(); |
| if (this->quickReject(paint.computeFastBounds(pathBounds, &storage))) { |
| return; |
| } |
| bounds = &pathBounds; |
| } |
| |
| const SkRect& r = path.getBounds(); |
| if (r.width() <= 0 && r.height() <= 0) { |
| if (path.isInverseFillType()) { |
| this->internalDrawPaint(paint); |
| return; |
| } |
| } |
| |
| LOOPER_BEGIN(paint, SkDrawFilter::kPath_Type, bounds) |
| |
| while (iter.next()) { |
| iter.fDevice->drawPath(iter, path, looper.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| bool SkCanvas::canDrawBitmapAsSprite(SkScalar x, SkScalar y, int w, int h, const SkPaint& paint) { |
| if (!paint.getImageFilter()) { |
| return false; |
| } |
| |
| const SkMatrix& ctm = this->getTotalMatrix(); |
| if (!SkTreatAsSprite(ctm, SkISize::Make(w, h), paint)) { |
| return false; |
| } |
| |
| // Currently we can only use the filterSprite code if we are clipped to the bitmap's bounds. |
| // Once we can filter and the filter will return a result larger than itself, we should be |
| // able to remove this constraint. |
| // skbug.com/4526 |
| // |
| SkPoint pt; |
| ctm.mapXY(x, y, &pt); |
| SkIRect ir = SkIRect::MakeXYWH(SkScalarRoundToInt(pt.x()), SkScalarRoundToInt(pt.y()), w, h); |
| return ir.contains(fMCRec->fRasterClip.getBounds()); |
| } |
| |
| void SkCanvas::onDrawImage(const SkImage* image, SkScalar x, SkScalar y, const SkPaint* paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawImage()"); |
| SkRect bounds = SkRect::MakeXYWH(x, y, |
| SkIntToScalar(image->width()), SkIntToScalar(image->height())); |
| if (nullptr == paint || paint->canComputeFastBounds()) { |
| SkRect tmp = bounds; |
| if (paint) { |
| paint->computeFastBounds(tmp, &tmp); |
| } |
| if (this->quickReject(tmp)) { |
| return; |
| } |
| } |
| |
| SkLazyPaint lazy; |
| if (nullptr == paint) { |
| paint = lazy.init(); |
| } |
| |
| sk_sp<SkSpecialImage> special; |
| bool drawAsSprite = this->canDrawBitmapAsSprite(x, y, image->width(), image->height(), |
| *paint); |
| if (drawAsSprite && paint->getImageFilter()) { |
| special = this->getDevice()->makeSpecial(image); |
| if (!special) { |
| drawAsSprite = false; |
| } |
| } |
| |
| LOOPER_BEGIN_DRAWBITMAP(*paint, drawAsSprite, &bounds) |
| |
| while (iter.next()) { |
| const SkPaint& pnt = looper.paint(); |
| if (special) { |
| SkPoint pt; |
| iter.fMatrix->mapXY(x, y, &pt); |
| iter.fDevice->drawSpecial(iter, special.get(), |
| SkScalarRoundToInt(pt.fX), |
| SkScalarRoundToInt(pt.fY), pnt); |
| } else { |
| iter.fDevice->drawImage(iter, image, x, y, pnt); |
| } |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawImageRect(const SkImage* image, const SkRect* src, const SkRect& dst, |
| const SkPaint* paint, SrcRectConstraint constraint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawImageRect()"); |
| if (nullptr == paint || paint->canComputeFastBounds()) { |
| SkRect storage = dst; |
| if (paint) { |
| paint->computeFastBounds(dst, &storage); |
| } |
| if (this->quickReject(storage)) { |
| return; |
| } |
| } |
| SkLazyPaint lazy; |
| if (nullptr == paint) { |
| paint = lazy.init(); |
| } |
| |
| LOOPER_BEGIN_CHECK_COMPLETE_OVERWRITE(*paint, SkDrawFilter::kBitmap_Type, &dst, |
| image->isOpaque()) |
| |
| while (iter.next()) { |
| iter.fDevice->drawImageRect(iter, image, src, dst, looper.paint(), constraint); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawBitmap(const SkBitmap& bitmap, SkScalar x, SkScalar y, const SkPaint* paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawBitmap()"); |
| SkDEBUGCODE(bitmap.validate();) |
| |
| if (bitmap.drawsNothing()) { |
| return; |
| } |
| |
| SkLazyPaint lazy; |
| if (nullptr == paint) { |
| paint = lazy.init(); |
| } |
| |
| const SkMatrix matrix = SkMatrix::MakeTrans(x, y); |
| |
| SkRect storage; |
| const SkRect* bounds = nullptr; |
| if (paint->canComputeFastBounds()) { |
| bitmap.getBounds(&storage); |
| matrix.mapRect(&storage); |
| SkRect tmp = storage; |
| if (this->quickReject(paint->computeFastBounds(tmp, &tmp))) { |
| return; |
| } |
| bounds = &storage; |
| } |
| |
| sk_sp<SkSpecialImage> special; |
| bool drawAsSprite = bounds && this->canDrawBitmapAsSprite(x, y, bitmap.width(), bitmap.height(), |
| *paint); |
| if (drawAsSprite && paint->getImageFilter()) { |
| special = this->getDevice()->makeSpecial(bitmap); |
| if (!special) { |
| drawAsSprite = false; |
| } |
| } |
| |
| LOOPER_BEGIN_DRAWBITMAP(*paint, drawAsSprite, bounds) |
| |
| while (iter.next()) { |
| const SkPaint& pnt = looper.paint(); |
| if (special) { |
| SkPoint pt; |
| iter.fMatrix->mapXY(x, y, &pt); |
| iter.fDevice->drawSpecial(iter, special.get(), |
| SkScalarRoundToInt(pt.fX), |
| SkScalarRoundToInt(pt.fY), pnt); |
| } else { |
| iter.fDevice->drawBitmap(iter, bitmap, matrix, looper.paint()); |
| } |
| } |
| |
| LOOPER_END |
| } |
| |
| // this one is non-virtual, so it can be called safely by other canvas apis |
| void SkCanvas::internalDrawBitmapRect(const SkBitmap& bitmap, const SkRect* src, |
| const SkRect& dst, const SkPaint* paint, |
| SrcRectConstraint constraint) { |
| if (bitmap.drawsNothing() || dst.isEmpty()) { |
| return; |
| } |
| |
| if (nullptr == paint || paint->canComputeFastBounds()) { |
| SkRect storage; |
| if (this->quickReject(paint ? paint->computeFastBounds(dst, &storage) : dst)) { |
| return; |
| } |
| } |
| |
| SkLazyPaint lazy; |
| if (nullptr == paint) { |
| paint = lazy.init(); |
| } |
| |
| LOOPER_BEGIN_CHECK_COMPLETE_OVERWRITE(*paint, SkDrawFilter::kBitmap_Type, &dst, |
| bitmap.isOpaque()) |
| |
| while (iter.next()) { |
| iter.fDevice->drawBitmapRect(iter, bitmap, src, dst, looper.paint(), constraint); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawBitmapRect(const SkBitmap& bitmap, const SkRect* src, const SkRect& dst, |
| const SkPaint* paint, SrcRectConstraint constraint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawBitmapRectToRect()"); |
| SkDEBUGCODE(bitmap.validate();) |
| this->internalDrawBitmapRect(bitmap, src, dst, paint, constraint); |
| } |
| |
| void SkCanvas::onDrawImageNine(const SkImage* image, const SkIRect& center, const SkRect& dst, |
| const SkPaint* paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawImageNine()"); |
| |
| if (nullptr == paint || paint->canComputeFastBounds()) { |
| SkRect storage; |
| if (this->quickReject(paint ? paint->computeFastBounds(dst, &storage) : dst)) { |
| return; |
| } |
| } |
| |
| SkLazyPaint lazy; |
| if (nullptr == paint) { |
| paint = lazy.init(); |
| } |
| |
| LOOPER_BEGIN(*paint, SkDrawFilter::kBitmap_Type, &dst) |
| |
| while (iter.next()) { |
| iter.fDevice->drawImageNine(iter, image, center, dst, looper.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawBitmapNine(const SkBitmap& bitmap, const SkIRect& center, const SkRect& dst, |
| const SkPaint* paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawBitmapNine()"); |
| SkDEBUGCODE(bitmap.validate();) |
| |
| if (nullptr == paint || paint->canComputeFastBounds()) { |
| SkRect storage; |
| if (this->quickReject(paint ? paint->computeFastBounds(dst, &storage) : dst)) { |
| return; |
| } |
| } |
| |
| SkLazyPaint lazy; |
| if (nullptr == paint) { |
| paint = lazy.init(); |
| } |
| |
| LOOPER_BEGIN(*paint, SkDrawFilter::kBitmap_Type, &dst) |
| |
| while (iter.next()) { |
| iter.fDevice->drawBitmapNine(iter, bitmap, center, dst, looper.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawImageLattice(const SkImage* image, const Lattice& lattice, const SkRect& dst, |
| const SkPaint* paint) { |
| if (nullptr == paint || paint->canComputeFastBounds()) { |
| SkRect storage; |
| if (this->quickReject(paint ? paint->computeFastBounds(dst, &storage) : dst)) { |
| return; |
| } |
| } |
| |
| SkLazyPaint lazy; |
| if (nullptr == paint) { |
| paint = lazy.init(); |
| } |
| |
| LOOPER_BEGIN(*paint, SkDrawFilter::kBitmap_Type, &dst) |
| |
| while (iter.next()) { |
| iter.fDevice->drawImageLattice(iter, image, lattice, dst, looper.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawBitmapLattice(const SkBitmap& bitmap, const Lattice& lattice, |
| const SkRect& dst, const SkPaint* paint) { |
| if (nullptr == paint || paint->canComputeFastBounds()) { |
| SkRect storage; |
| if (this->quickReject(paint ? paint->computeFastBounds(dst, &storage) : dst)) { |
| return; |
| } |
| } |
| |
| SkLazyPaint lazy; |
| if (nullptr == paint) { |
| paint = lazy.init(); |
| } |
| |
| LOOPER_BEGIN(*paint, SkDrawFilter::kBitmap_Type, &dst) |
| |
| while (iter.next()) { |
| iter.fDevice->drawBitmapLattice(iter, bitmap, lattice, dst, looper.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| class SkDeviceFilteredPaint { |
| public: |
| SkDeviceFilteredPaint(SkBaseDevice* device, const SkPaint& paint) { |
| uint32_t filteredFlags = device->filterTextFlags(paint); |
| if (filteredFlags != paint.getFlags()) { |
| SkPaint* newPaint = fLazy.set(paint); |
| newPaint->setFlags(filteredFlags); |
| fPaint = newPaint; |
| } else { |
| fPaint = &paint; |
| } |
| } |
| |
| const SkPaint& paint() const { return *fPaint; } |
| |
| private: |
| const SkPaint* fPaint; |
| SkLazyPaint fLazy; |
| }; |
| |
| void SkCanvas::DrawRect(const SkDraw& draw, const SkPaint& paint, |
| const SkRect& r, SkScalar textSize) { |
| if (paint.getStyle() == SkPaint::kFill_Style) { |
| draw.fDevice->drawRect(draw, r, paint); |
| } else { |
| SkPaint p(paint); |
| p.setStrokeWidth(SkScalarMul(textSize, paint.getStrokeWidth())); |
| draw.fDevice->drawRect(draw, r, p); |
| } |
| } |
| |
| void SkCanvas::DrawTextDecorations(const SkDraw& draw, const SkPaint& paint, |
| const char text[], size_t byteLength, |
| SkScalar x, SkScalar y) { |
| SkASSERT(byteLength == 0 || text != nullptr); |
| |
| // nothing to draw |
| if (text == nullptr || byteLength == 0 || |
| draw.fRC->isEmpty() || |
| (paint.getAlpha() == 0 && paint.isSrcOver())) { |
| return; |
| } |
| |
| SkScalar width = 0; |
| SkPoint start; |
| |
| start.set(0, 0); // to avoid warning |
| if (paint.getFlags() & (SkPaint::kUnderlineText_Flag | |
| SkPaint::kStrikeThruText_Flag)) { |
| width = paint.measureText(text, byteLength); |
| |
| SkScalar offsetX = 0; |
| if (paint.getTextAlign() == SkPaint::kCenter_Align) { |
| offsetX = SkScalarHalf(width); |
| } else if (paint.getTextAlign() == SkPaint::kRight_Align) { |
| offsetX = width; |
| } |
| start.set(x - offsetX, y); |
| } |
| |
| if (0 == width) { |
| return; |
| } |
| |
| uint32_t flags = paint.getFlags(); |
| |
| if (flags & (SkPaint::kUnderlineText_Flag | |
| SkPaint::kStrikeThruText_Flag)) { |
| SkScalar textSize = paint.getTextSize(); |
| SkScalar height = SkScalarMul(textSize, kStdUnderline_Thickness); |
| SkRect r; |
| |
| r.fLeft = start.fX; |
| r.fRight = start.fX + width; |
| |
| if (flags & SkPaint::kUnderlineText_Flag) { |
| SkScalar offset = SkScalarMulAdd(textSize, kStdUnderline_Offset, |
| start.fY); |
| r.fTop = offset; |
| r.fBottom = offset + height; |
| DrawRect(draw, paint, r, 1); |
| } |
| if (flags & SkPaint::kStrikeThruText_Flag) { |
| SkScalar offset = SkScalarMulAdd(textSize, kStdStrikeThru_Offset, |
| start.fY); |
| r.fTop = offset; |
| r.fBottom = offset + height; |
| DrawRect(draw, paint, r, 1); |
| } |
| } |
| } |
| |
| void SkCanvas::onDrawText(const void* text, size_t byteLength, SkScalar x, SkScalar y, |
| const SkPaint& paint) { |
| LOOPER_BEGIN(paint, SkDrawFilter::kText_Type, nullptr) |
| |
| while (iter.next()) { |
| SkDeviceFilteredPaint dfp(iter.fDevice, looper.paint()); |
| iter.fDevice->drawText(iter, text, byteLength, x, y, dfp.paint()); |
| DrawTextDecorations(iter, dfp.paint(), |
| static_cast<const char*>(text), byteLength, x, y); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawPosText(const void* text, size_t byteLength, const SkPoint pos[], |
| const SkPaint& paint) { |
| SkPoint textOffset = SkPoint::Make(0, 0); |
| |
| LOOPER_BEGIN(paint, SkDrawFilter::kText_Type, nullptr) |
| |
| while (iter.next()) { |
| SkDeviceFilteredPaint dfp(iter.fDevice, looper.paint()); |
| iter.fDevice->drawPosText(iter, text, byteLength, &pos->fX, 2, textOffset, |
| dfp.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawPosTextH(const void* text, size_t byteLength, const SkScalar xpos[], |
| SkScalar constY, const SkPaint& paint) { |
| |
| SkPoint textOffset = SkPoint::Make(0, constY); |
| |
| LOOPER_BEGIN(paint, SkDrawFilter::kText_Type, nullptr) |
| |
| while (iter.next()) { |
| SkDeviceFilteredPaint dfp(iter.fDevice, looper.paint()); |
| iter.fDevice->drawPosText(iter, text, byteLength, xpos, 1, textOffset, |
| dfp.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawTextOnPath(const void* text, size_t byteLength, const SkPath& path, |
| const SkMatrix* matrix, const SkPaint& paint) { |
| LOOPER_BEGIN(paint, SkDrawFilter::kText_Type, nullptr) |
| |
| while (iter.next()) { |
| iter.fDevice->drawTextOnPath(iter, text, byteLength, path, |
| matrix, looper.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawTextRSXform(const void* text, size_t byteLength, const SkRSXform xform[], |
| const SkRect* cullRect, const SkPaint& paint) { |
| if (cullRect && this->quickReject(*cullRect)) { |
| return; |
| } |
| |
| LOOPER_BEGIN(paint, SkDrawFilter::kText_Type, nullptr) |
| |
| while (iter.next()) { |
| iter.fDevice->drawTextRSXform(iter, text, byteLength, xform, looper.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawTextBlob(const SkTextBlob* blob, SkScalar x, SkScalar y, |
| const SkPaint& paint) { |
| |
| SkRect storage; |
| const SkRect* bounds = nullptr; |
| if (paint.canComputeFastBounds()) { |
| storage = blob->bounds().makeOffset(x, y); |
| SkRect tmp; |
| if (this->quickReject(paint.computeFastBounds(storage, &tmp))) { |
| return; |
| } |
| bounds = &storage; |
| } |
| |
| // We cannot filter in the looper as we normally do, because the paint is |
| // incomplete at this point (text-related attributes are embedded within blob run paints). |
| SkDrawFilter* drawFilter = fMCRec->fFilter; |
| fMCRec->fFilter = nullptr; |
| |
| LOOPER_BEGIN(paint, SkDrawFilter::kText_Type, bounds) |
| |
| while (iter.next()) { |
| SkDeviceFilteredPaint dfp(iter.fDevice, looper.paint()); |
| iter.fDevice->drawTextBlob(iter, blob, x, y, dfp.paint(), drawFilter); |
| } |
| |
| LOOPER_END |
| |
| fMCRec->fFilter = drawFilter; |
| } |
| |
| // These will become non-virtual, so they always call the (virtual) onDraw... method |
| void SkCanvas::drawText(const void* text, size_t byteLength, SkScalar x, SkScalar y, |
| const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawText()"); |
| if (byteLength) { |
| this->onDrawText(text, byteLength, x, y, paint); |
| } |
| } |
| void SkCanvas::drawPosText(const void* text, size_t byteLength, const SkPoint pos[], |
| const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawPosText()"); |
| if (byteLength) { |
| this->onDrawPosText(text, byteLength, pos, paint); |
| } |
| } |
| void SkCanvas::drawPosTextH(const void* text, size_t byteLength, const SkScalar xpos[], |
| SkScalar constY, const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawPosTextH()"); |
| if (byteLength) { |
| this->onDrawPosTextH(text, byteLength, xpos, constY, paint); |
| } |
| } |
| void SkCanvas::drawTextOnPath(const void* text, size_t byteLength, const SkPath& path, |
| const SkMatrix* matrix, const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawTextOnPath()"); |
| if (byteLength) { |
| this->onDrawTextOnPath(text, byteLength, path, matrix, paint); |
| } |
| } |
| void SkCanvas::drawTextRSXform(const void* text, size_t byteLength, const SkRSXform xform[], |
| const SkRect* cullRect, const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawTextRSXform()"); |
| if (byteLength) { |
| this->onDrawTextRSXform(text, byteLength, xform, cullRect, paint); |
| } |
| } |
| void SkCanvas::drawTextBlob(const SkTextBlob* blob, SkScalar x, SkScalar y, |
| const SkPaint& paint) { |
| RETURN_ON_NULL(blob); |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawTextBlob()"); |
| this->onDrawTextBlob(blob, x, y, paint); |
| } |
| |
| void SkCanvas::onDrawVertices(VertexMode vmode, int vertexCount, |
| const SkPoint verts[], const SkPoint texs[], |
| const SkColor colors[], SkBlendMode bmode, |
| const uint16_t indices[], int indexCount, |
| const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawVertices()"); |
| LOOPER_BEGIN(paint, SkDrawFilter::kPath_Type, nullptr) |
| |
| while (iter.next()) { |
| iter.fDevice->drawVertices(iter, vmode, vertexCount, verts, texs, |
| colors, bmode, indices, indexCount, |
| looper.paint()); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::drawPatch(const SkPoint cubics[12], const SkColor colors[4], |
| const SkPoint texCoords[4], SkBlendMode bmode, |
| const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawPatch()"); |
| if (nullptr == cubics) { |
| return; |
| } |
| |
| this->onDrawPatch(cubics, colors, texCoords, bmode, paint); |
| } |
| |
| void SkCanvas::onDrawPatch(const SkPoint cubics[12], const SkColor colors[4], |
| const SkPoint texCoords[4], SkBlendMode bmode, |
| const SkPaint& paint) { |
| // Since a patch is always within the convex hull of the control points, we discard it when its |
| // bounding rectangle is completely outside the current clip. |
| SkRect bounds; |
| bounds.set(cubics, SkPatchUtils::kNumCtrlPts); |
| if (this->quickReject(bounds)) { |
| return; |
| } |
| |
| LOOPER_BEGIN(paint, SkDrawFilter::kPath_Type, nullptr) |
| |
| while (iter.next()) { |
| iter.fDevice->drawPatch(iter, cubics, colors, texCoords, bmode, paint); |
| } |
| |
| LOOPER_END |
| } |
| |
| void SkCanvas::drawDrawable(SkDrawable* dr, SkScalar x, SkScalar y) { |
| RETURN_ON_NULL(dr); |
| if (x || y) { |
| SkMatrix matrix = SkMatrix::MakeTrans(x, y); |
| this->onDrawDrawable(dr, &matrix); |
| } else { |
| this->onDrawDrawable(dr, nullptr); |
| } |
| } |
| |
| void SkCanvas::drawDrawable(SkDrawable* dr, const SkMatrix* matrix) { |
| RETURN_ON_NULL(dr); |
| if (matrix && matrix->isIdentity()) { |
| matrix = nullptr; |
| } |
| this->onDrawDrawable(dr, matrix); |
| } |
| |
| void SkCanvas::onDrawDrawable(SkDrawable* dr, const SkMatrix* matrix) { |
| // drawable bounds are no longer reliable (e.g. android displaylist) |
| // so don't use them for quick-reject |
| dr->draw(this, matrix); |
| } |
| |
| void SkCanvas::onDrawAtlas(const SkImage* atlas, const SkRSXform xform[], const SkRect tex[], |
| const SkColor colors[], int count, SkBlendMode bmode, |
| const SkRect* cull, const SkPaint* paint) { |
| if (cull && this->quickReject(*cull)) { |
| return; |
| } |
| |
| SkPaint pnt; |
| if (paint) { |
| pnt = *paint; |
| } |
| |
| LOOPER_BEGIN(pnt, SkDrawFilter::kPath_Type, nullptr) |
| while (iter.next()) { |
| iter.fDevice->drawAtlas(iter, atlas, xform, tex, colors, count, bmode, pnt); |
| } |
| LOOPER_END |
| } |
| |
| void SkCanvas::onDrawAnnotation(const SkRect& rect, const char key[], SkData* value) { |
| SkASSERT(key); |
| |
| SkPaint paint; |
| LOOPER_BEGIN(paint, SkDrawFilter::kRect_Type, nullptr) |
| while (iter.next()) { |
| iter.fDevice->drawAnnotation(iter, rect, key, value); |
| } |
| LOOPER_END |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| // These methods are NOT virtual, and therefore must call back into virtual |
| // methods, rather than actually drawing themselves. |
| ////////////////////////////////////////////////////////////////////////////// |
| |
| void SkCanvas::drawARGB(U8CPU a, U8CPU r, U8CPU g, U8CPU b, SkBlendMode mode) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawARGB()"); |
| SkPaint paint; |
| |
| paint.setARGB(a, r, g, b); |
| paint.setBlendMode(mode); |
| this->drawPaint(paint); |
| } |
| |
| void SkCanvas::drawColor(SkColor c, SkBlendMode mode) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawColor()"); |
| SkPaint paint; |
| |
| paint.setColor(c); |
| paint.setBlendMode(mode); |
| this->drawPaint(paint); |
| } |
| |
| void SkCanvas::drawPoint(SkScalar x, SkScalar y, const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawPoint(SkPaint)"); |
| SkPoint pt; |
| |
| pt.set(x, y); |
| this->drawPoints(kPoints_PointMode, 1, &pt, paint); |
| } |
| |
| void SkCanvas::drawPoint(SkScalar x, SkScalar y, SkColor color) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawPoint(SkColor)"); |
| SkPoint pt; |
| SkPaint paint; |
| |
| pt.set(x, y); |
| paint.setColor(color); |
| this->drawPoints(kPoints_PointMode, 1, &pt, paint); |
| } |
| |
| void SkCanvas::drawLine(SkScalar x0, SkScalar y0, SkScalar x1, SkScalar y1, |
| const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawLine()"); |
| SkPoint pts[2]; |
| |
| pts[0].set(x0, y0); |
| pts[1].set(x1, y1); |
| this->drawPoints(kLines_PointMode, 2, pts, paint); |
| } |
| |
| void SkCanvas::drawRectCoords(SkScalar left, SkScalar top, |
| SkScalar right, SkScalar bottom, |
| const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawRectCoords()"); |
| SkRect r; |
| |
| r.set(left, top, right, bottom); |
| this->drawRect(r, paint); |
| } |
| |
| void SkCanvas::drawCircle(SkScalar cx, SkScalar cy, SkScalar radius, |
| const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawCircle()"); |
| if (radius < 0) { |
| radius = 0; |
| } |
| |
| SkRect r; |
| r.set(cx - radius, cy - radius, cx + radius, cy + radius); |
| this->drawOval(r, paint); |
| } |
| |
| void SkCanvas::drawRoundRect(const SkRect& r, SkScalar rx, SkScalar ry, |
| const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawRoundRect()"); |
| if (rx > 0 && ry > 0) { |
| SkRRect rrect; |
| rrect.setRectXY(r, rx, ry); |
| this->drawRRect(rrect, paint); |
| } else { |
| this->drawRect(r, paint); |
| } |
| } |
| |
| void SkCanvas::drawArc(const SkRect& oval, SkScalar startAngle, |
| SkScalar sweepAngle, bool useCenter, |
| const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawArc()"); |
| if (oval.isEmpty() || !sweepAngle) { |
| return; |
| } |
| this->onDrawArc(oval, startAngle, sweepAngle, useCenter, paint); |
| } |
| |
| void SkCanvas::drawTextOnPathHV(const void* text, size_t byteLength, |
| const SkPath& path, SkScalar hOffset, |
| SkScalar vOffset, const SkPaint& paint) { |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawTextOnPathHV()"); |
| SkMatrix matrix; |
| |
| matrix.setTranslate(hOffset, vOffset); |
| this->drawTextOnPath(text, byteLength, path, &matrix, paint); |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| /** |
| * This constant is trying to balance the speed of ref'ing a subpicture into a parent picture, |
| * against the playback cost of recursing into the subpicture to get at its actual ops. |
| * |
| * For now we pick a conservatively small value, though measurement (and other heuristics like |
| * the type of ops contained) may justify changing this value. |
| */ |
| #define kMaxPictureOpsToUnrollInsteadOfRef 1 |
| |
| void SkCanvas::drawPicture(const SkPicture* picture, const SkMatrix* matrix, const SkPaint* paint) { |
| RETURN_ON_NULL(picture); |
| |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawPicture()"); |
| if (matrix && matrix->isIdentity()) { |
| matrix = nullptr; |
| } |
| if (picture->approximateOpCount() <= kMaxPictureOpsToUnrollInsteadOfRef) { |
| SkAutoCanvasMatrixPaint acmp(this, matrix, paint, picture->cullRect()); |
| picture->playback(this); |
| } else { |
| this->onDrawPicture(picture, matrix, paint); |
| } |
| } |
| |
| void SkCanvas::onDrawPicture(const SkPicture* picture, const SkMatrix* matrix, |
| const SkPaint* paint) { |
| if (!paint || paint->canComputeFastBounds()) { |
| SkRect bounds = picture->cullRect(); |
| if (paint) { |
| paint->computeFastBounds(bounds, &bounds); |
| } |
| if (matrix) { |
| matrix->mapRect(&bounds); |
| } |
| if (this->quickReject(bounds)) { |
| return; |
| } |
| } |
| |
| SkAutoCanvasMatrixPaint acmp(this, matrix, paint, picture->cullRect()); |
| picture->playback(this); |
| } |
| |
| #ifdef SK_EXPERIMENTAL_SHADOWING |
| void SkCanvas::drawShadowedPicture(const SkPicture* picture, |
| const SkMatrix* matrix, |
| const SkPaint* paint, |
| const SkShadowParams& params) { |
| RETURN_ON_NULL(picture); |
| |
| TRACE_EVENT0("disabled-by-default-skia", "SkCanvas::drawShadowedPicture()"); |
| |
| this->onDrawShadowedPicture(picture, matrix, paint, params); |
| } |
| |
| void SkCanvas::onDrawShadowedPicture(const SkPicture* picture, |
| const SkMatrix* matrix, |
| const SkPaint* paint, |
| const SkShadowParams& params) { |
| if (!paint || paint->canComputeFastBounds()) { |
| SkRect bounds = picture->cullRect(); |
| if (paint) { |
| paint->computeFastBounds(bounds, &bounds); |
| } |
| if (matrix) { |
| matrix->mapRect(&bounds); |
| } |
| if (this->quickReject(bounds)) { |
| return; |
| } |
| } |
| |
| SkAutoCanvasMatrixPaint acmp(this, matrix, paint, picture->cullRect()); |
| |
| sk_sp<SkImage> povDepthMap; |
| sk_sp<SkImage> diffuseMap; |
| |
| // povDepthMap |
| { |
| SkLights::Builder builder; |
| builder.add(SkLights::Light::MakeDirectional(SkColor3f::Make(1.0f, 1.0f, 1.0f), |
| SkVector3::Make(0.0f, 0.0f, 1.0f))); |
| sk_sp<SkLights> povLight = builder.finish(); |
| |
| SkImageInfo info = SkImageInfo::Make(picture->cullRect().width(), |
| picture->cullRect().height(), |
| kBGRA_8888_SkColorType, |
| kOpaque_SkAlphaType); |
| |
| // Create a new surface (that matches the backend of canvas) |
| // to create the povDepthMap |
| sk_sp<SkSurface> surf(this->makeSurface(info)); |
| |
| // Wrap another SPFCanvas around the surface |
| sk_sp<SkShadowPaintFilterCanvas> depthMapCanvas = |
| sk_make_sp<SkShadowPaintFilterCanvas>(surf->getCanvas()); |
| |
| // set the depth map canvas to have the light as the user's POV |
| depthMapCanvas->setLights(std::move(povLight)); |
| |
| depthMapCanvas->drawPicture(picture); |
| povDepthMap = surf->makeImageSnapshot(); |
| } |
| |
| // diffuseMap |
| { |
| SkImageInfo info = SkImageInfo::Make(picture->cullRect().width(), |
| picture->cullRect().height(), |
| kBGRA_8888_SkColorType, |
| kOpaque_SkAlphaType); |
| |
| sk_sp<SkSurface> surf(this->makeSurface(info)); |
| surf->getCanvas()->drawPicture(picture); |
| |
| diffuseMap = surf->makeImageSnapshot(); |
| } |
| |
| sk_sp<SkShader> povDepthShader = povDepthMap->makeShader(SkShader::kClamp_TileMode, |
| SkShader::kClamp_TileMode); |
| sk_sp<SkShader> diffuseShader = diffuseMap->makeShader(SkShader::kClamp_TileMode, |
| SkShader::kClamp_TileMode); |
| |
| // TODO: pass the depth to the shader in vertices, or uniforms |
| // so we don't have to render depth and color separately |
| for (int i = 0; i < fLights->numLights(); ++i) { |
| // skip over ambient lights; they don't cast shadows |
| // lights that have shadow maps do not need updating (because lights are immutable) |
| sk_sp<SkImage> depthMap; |
| SkISize shMapSize; |
| |
| if (fLights->light(i).getShadowMap() != nullptr) { |
| continue; |
| } |
| |
| if (fLights->light(i).isRadial()) { |
| shMapSize.fHeight = 1; |
| shMapSize.fWidth = (int) picture->cullRect().width(); |
| |
| SkImageInfo info = SkImageInfo::Make(diffuseMap->width(), 1, |
| kBGRA_8888_SkColorType, |
| kOpaque_SkAlphaType); |
| |
| // Create new surface (that matches the backend of canvas) |
| // for each shadow map |
| sk_sp<SkSurface> surf(this->makeSurface(info)); |
| |
| // Wrap another SPFCanvas around the surface |
| SkCanvas* depthMapCanvas = surf->getCanvas(); |
| |
| SkLights::Builder builder; |
| builder.add(fLights->light(i)); |
| sk_sp<SkLights> curLight = builder.finish(); |
| |
| sk_sp<SkShader> shadowMapShader; |
| shadowMapShader = SkRadialShadowMapShader::Make( |
| povDepthShader, curLight, |
| (int) picture->cullRect().width(), |
| (int) picture->cullRect().height()); |
| |
| SkPaint shadowMapPaint; |
| shadowMapPaint.setShader(std::move(shadowMapShader)); |
| |
| depthMapCanvas->setLights(curLight); |
| |
| depthMapCanvas->drawRect(SkRect::MakeIWH(diffuseMap->width(), |
| diffuseMap->height()), |
| shadowMapPaint); |
| |
| depthMap = surf->makeImageSnapshot(); |
| |
| } else { |
| // TODO: compute the correct size of the depth map from the light properties |
| // TODO: maybe add a kDepth_8_SkColorType |
| // TODO: find actual max depth of picture |
| shMapSize = SkShadowPaintFilterCanvas::ComputeDepthMapSize( |
| fLights->light(i), 255, |
| (int) picture->cullRect().width(), |
| (int) picture->cullRect().height()); |
| |
| SkImageInfo info = SkImageInfo::Make(shMapSize.fWidth, shMapSize.fHeight, |
| kBGRA_8888_SkColorType, |
| kOpaque_SkAlphaType); |
| |
| // Create a new surface (that matches the backend of canvas) |
| // for each shadow map |
| sk_sp<SkSurface> surf(this->makeSurface(info)); |
| |
| // Wrap another SPFCanvas around the surface |
| sk_sp<SkShadowPaintFilterCanvas> depthMapCanvas = |
| sk_make_sp<SkShadowPaintFilterCanvas>(surf->getCanvas()); |
| depthMapCanvas->setShadowParams(params); |
| |
| // set the depth map canvas to have the light we're drawing. |
| SkLights::Builder builder; |
| builder.add(fLights->light(i)); |
| sk_sp<SkLights> curLight = builder.finish(); |
| depthMapCanvas->setLights(std::move(curLight)); |
| |
| depthMapCanvas->drawPicture(picture); |
| depthMap = surf->makeImageSnapshot(); |
| } |
| |
| if (params.fType == SkShadowParams::kNoBlur_ShadowType) { |
| fLights->light(i).setShadowMap(std::move(depthMap)); |
| } else if (params.fType == SkShadowParams::kVariance_ShadowType) { |
| // we blur the variance map |
| SkPaint blurPaint; |
| blurPaint.setImageFilter(SkImageFilter::MakeBlur(params.fShadowRadius, |
| params.fShadowRadius, nullptr)); |
| |
| SkImageInfo blurInfo = SkImageInfo::Make(shMapSize.fWidth, shMapSize.fHeight, |
| kBGRA_8888_SkColorType, |
| kOpaque_SkAlphaType); |
| |
| sk_sp<SkSurface> blurSurf(this->makeSurface(blurInfo)); |
| |
| blurSurf->getCanvas()->drawImage(std::move(depthMap), 0, 0, &blurPaint); |
| |
| fLights->light(i).setShadowMap(blurSurf->makeImageSnapshot()); |
| } |
| } |
| |
| SkPaint shadowPaint; |
| sk_sp<SkShader> shadowShader = SkShadowShader::Make(std::move(povDepthShader), |
| std::move(diffuseShader), |
| fLights, |
| diffuseMap->width(), |
| diffuseMap->height(), |
| params); |
| |
| shadowPaint.setShader(shadowShader); |
| |
| this->drawRect(SkRect::MakeIWH(diffuseMap->width(), diffuseMap->height()), shadowPaint); |
| } |
| #endif |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| SkCanvas::LayerIter::LayerIter(SkCanvas* canvas) { |
| static_assert(sizeof(fStorage) >= sizeof(SkDrawIter), "fStorage_too_small"); |
| |
| SkASSERT(canvas); |
| |
| fImpl = new (fStorage) SkDrawIter(canvas); |
| fDone = !fImpl->next(); |
| } |
| |
| SkCanvas::LayerIter::~LayerIter() { |
| fImpl->~SkDrawIter(); |
| } |
| |
| void SkCanvas::LayerIter::next() { |
| fDone = !fImpl->next(); |
| } |
| |
| SkBaseDevice* SkCanvas::LayerIter::device() const { |
| return fImpl->getDevice(); |
| } |
| |
| const SkMatrix& SkCanvas::LayerIter::matrix() const { |
| return fImpl->getMatrix(); |
| } |
| |
| const SkPaint& SkCanvas::LayerIter::paint() const { |
| const SkPaint* paint = fImpl->getPaint(); |
| if (nullptr == paint) { |
| paint = &fDefaultPaint; |
| } |
| return *paint; |
| } |
| |
| const SkRasterClip& SkCanvas::LayerIter::clip() const { return fImpl->getClip(); } |
| int SkCanvas::LayerIter::x() const { return fImpl->getX(); } |
| int SkCanvas::LayerIter::y() const { return fImpl->getY(); } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| SkCanvasClipVisitor::~SkCanvasClipVisitor() { } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| static bool supported_for_raster_canvas(const SkImageInfo& info) { |
| switch (info.alphaType()) { |
| case kPremul_SkAlphaType: |
| case kOpaque_SkAlphaType: |
| break; |
| default: |
| return false; |
| } |
| |
| switch (info.colorType()) { |
| case kAlpha_8_SkColorType: |
| case kRGB_565_SkColorType: |
| case kN32_SkColorType: |
| case kRGBA_F16_SkColorType: |
| break; |
| default: |
| return false; |
| } |
| |
| return true; |
| } |
| |
| std::unique_ptr<SkCanvas> SkCanvas::MakeRasterDirect(const SkImageInfo& info, void* pixels, |
| size_t rowBytes) { |
| if (!supported_for_raster_canvas(info)) { |
| return nullptr; |
| } |
| |
| SkBitmap bitmap; |
| if (!bitmap.installPixels(info, pixels, rowBytes)) { |
| return nullptr; |
| } |
| return skstd::make_unique<SkCanvas>(bitmap); |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| SkAutoCanvasMatrixPaint::SkAutoCanvasMatrixPaint(SkCanvas* canvas, const SkMatrix* matrix, |
| const SkPaint* paint, const SkRect& bounds) |
| : fCanvas(canvas) |
| , fSaveCount(canvas->getSaveCount()) |
| { |
| if (paint) { |
| SkRect newBounds = bounds; |
| if (matrix) { |
| matrix->mapRect(&newBounds); |
| } |
| canvas->saveLayer(&newBounds, paint); |
| } else if (matrix) { |
| canvas->save(); |
| } |
| |
| if (matrix) { |
| canvas->concat(*matrix); |
| } |
| } |
| |
| SkAutoCanvasMatrixPaint::~SkAutoCanvasMatrixPaint() { |
| fCanvas->restoreToCount(fSaveCount); |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| SkNoDrawCanvas::SkNoDrawCanvas(int width, int height) |
| : INHERITED(SkIRect::MakeWH(width, height), kConservativeRasterClip_InitFlag) {} |
| |
| SkNoDrawCanvas::SkNoDrawCanvas(const SkIRect& bounds) |
| : INHERITED(bounds, kConservativeRasterClip_InitFlag) {} |
| |
| SkCanvas::SaveLayerStrategy SkNoDrawCanvas::getSaveLayerStrategy(const SaveLayerRec& rec) { |
| (void)this->INHERITED::getSaveLayerStrategy(rec); |
| return kNoLayer_SaveLayerStrategy; |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| static_assert((int)SkRegion::kDifference_Op == (int)kDifference_SkClipOp, ""); |
| static_assert((int)SkRegion::kIntersect_Op == (int)kIntersect_SkClipOp, ""); |
| static_assert((int)SkRegion::kUnion_Op == (int)kUnion_SkClipOp, ""); |
| static_assert((int)SkRegion::kXOR_Op == (int)kXOR_SkClipOp, ""); |
| static_assert((int)SkRegion::kReverseDifference_Op == (int)kReverseDifference_SkClipOp, ""); |
| static_assert((int)SkRegion::kReplace_Op == (int)kReplace_SkClipOp, ""); |
| |
| /////////////////////////////////////////////////////////////////////////////////////////////////// |
| |
| SkRasterHandleAllocator::Handle SkCanvas::accessTopRasterHandle() const { |
| if (fAllocator && fMCRec->fTopLayer->fDevice) { |
| const SkBaseDevice* dev = fMCRec->fTopLayer->fDevice; |
| SkRasterHandleAllocator::Handle handle = dev->getRasterHandle(); |
| SkIPoint origin = dev->getOrigin(); |
| SkMatrix ctm = this->getTotalMatrix(); |
| ctm.preTranslate(SkIntToScalar(-origin.x()), SkIntToScalar(-origin.y())); |
| |
| SkIRect clip = fMCRec->fRasterClip.getBounds(); |
| clip.offset(-origin.x(), -origin.y()); |
| if (!clip.intersect(0, 0, dev->width(), dev->height())) { |
| clip.setEmpty(); |
| } |
| |
| fAllocator->updateHandle(handle, ctm, clip); |
| return handle; |
| } |
| return nullptr; |
| } |
| |
| static bool install(SkBitmap* bm, const SkImageInfo& info, |
| const SkRasterHandleAllocator::Rec& rec) { |
| return bm->installPixels(info, rec.fPixels, rec.fRowBytes, nullptr, |
| rec.fReleaseProc, rec.fReleaseCtx); |
| } |
| |
| SkRasterHandleAllocator::Handle SkRasterHandleAllocator::allocBitmap(const SkImageInfo& info, |
| SkBitmap* bm) { |
| SkRasterHandleAllocator::Rec rec; |
| if (!this->allocHandle(info, &rec) || !install(bm, info, rec)) { |
| return nullptr; |
| } |
| return rec.fHandle; |
| } |
| |
| std::unique_ptr<SkCanvas> |
| SkRasterHandleAllocator::MakeCanvas(std::unique_ptr<SkRasterHandleAllocator> alloc, |
| const SkImageInfo& info, const Rec* rec) { |
| if (!alloc || !supported_for_raster_canvas(info)) { |
| return nullptr; |
| } |
| |
| SkBitmap bm; |
| Handle hndl; |
| |
| if (rec) { |
| hndl = install(&bm, info, *rec) ? rec->fHandle : nullptr; |
| } else { |
| hndl = alloc->allocBitmap(info, &bm); |
| } |
| return hndl ? std::unique_ptr<SkCanvas>(new SkCanvas(bm, std::move(alloc), hndl)) : nullptr; |
| } |