| /* |
| * Copyright 2012 The Android Open Source Project |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #include <emmintrin.h> |
| #include "SkBitmapProcState_opts_SSE2.h" |
| #include "SkBlitRow_opts_SSE2.h" |
| #include "SkColorPriv.h" |
| #include "SkColor_opts_SSE2.h" |
| #include "SkDither.h" |
| #include "SkMSAN.h" |
| #include "SkUtils.h" |
| |
| /* SSE2 version of S32_Blend_BlitRow32() |
| * portable version is in core/SkBlitRow_D32.cpp |
| */ |
| void S32_Blend_BlitRow32_SSE2(SkPMColor* SK_RESTRICT dst, |
| const SkPMColor* SK_RESTRICT src, |
| int count, U8CPU alpha) { |
| SkASSERT(alpha <= 255); |
| if (count <= 0) { |
| return; |
| } |
| |
| uint32_t src_scale = SkAlpha255To256(alpha); |
| |
| if (count >= 4) { |
| SkASSERT(((size_t)dst & 0x03) == 0); |
| while (((size_t)dst & 0x0F) != 0) { |
| *dst = SkPMLerp(*src, *dst, src_scale); |
| src++; |
| dst++; |
| count--; |
| } |
| |
| const __m128i *s = reinterpret_cast<const __m128i*>(src); |
| __m128i *d = reinterpret_cast<__m128i*>(dst); |
| |
| while (count >= 4) { |
| // Load 4 pixels each of src and dest. |
| __m128i src_pixel = _mm_loadu_si128(s); |
| __m128i dst_pixel = _mm_load_si128(d); |
| |
| __m128i result = SkPMLerp_SSE2(src_pixel, dst_pixel, src_scale); |
| _mm_store_si128(d, result); |
| s++; |
| d++; |
| count -= 4; |
| } |
| src = reinterpret_cast<const SkPMColor*>(s); |
| dst = reinterpret_cast<SkPMColor*>(d); |
| } |
| |
| while (count > 0) { |
| *dst = SkPMLerp(*src, *dst, src_scale); |
| src++; |
| dst++; |
| count--; |
| } |
| } |
| |
| void S32A_Blend_BlitRow32_SSE2(SkPMColor* SK_RESTRICT dst, |
| const SkPMColor* SK_RESTRICT src, |
| int count, U8CPU alpha) { |
| SkASSERT(alpha <= 255); |
| if (count <= 0) { |
| return; |
| } |
| |
| if (count >= 4) { |
| while (((size_t)dst & 0x0F) != 0) { |
| *dst = SkBlendARGB32(*src, *dst, alpha); |
| src++; |
| dst++; |
| count--; |
| } |
| |
| const __m128i *s = reinterpret_cast<const __m128i*>(src); |
| __m128i *d = reinterpret_cast<__m128i*>(dst); |
| while (count >= 4) { |
| // Load 4 pixels each of src and dest. |
| __m128i src_pixel = _mm_loadu_si128(s); |
| __m128i dst_pixel = _mm_load_si128(d); |
| |
| __m128i result = SkBlendARGB32_SSE2(src_pixel, dst_pixel, alpha); |
| _mm_store_si128(d, result); |
| s++; |
| d++; |
| count -= 4; |
| } |
| src = reinterpret_cast<const SkPMColor*>(s); |
| dst = reinterpret_cast<SkPMColor*>(d); |
| } |
| |
| while (count > 0) { |
| *dst = SkBlendARGB32(*src, *dst, alpha); |
| src++; |
| dst++; |
| count--; |
| } |
| } |
| |
| void Color32A_D565_SSE2(uint16_t dst[], SkPMColor src, int count, int x, int y) { |
| SkASSERT(count > 0); |
| |
| uint32_t src_expand = (SkGetPackedG32(src) << 24) | |
| (SkGetPackedR32(src) << 13) | |
| (SkGetPackedB32(src) << 2); |
| unsigned scale = SkAlpha255To256(0xFF - SkGetPackedA32(src)) >> 3; |
| |
| // Check if we have enough pixels to run SIMD |
| if (count >= (int)(8 + (((16 - (size_t)dst) & 0x0F) >> 1))) { |
| __m128i* dst_wide; |
| const __m128i src_R_wide = _mm_set1_epi16(SkGetPackedR32(src) << 2); |
| const __m128i src_G_wide = _mm_set1_epi16(SkGetPackedG32(src) << 3); |
| const __m128i src_B_wide = _mm_set1_epi16(SkGetPackedB32(src) << 2); |
| const __m128i scale_wide = _mm_set1_epi16(scale); |
| const __m128i mask_blue = _mm_set1_epi16(SK_B16_MASK); |
| const __m128i mask_green = _mm_set1_epi16(SK_G16_MASK << SK_G16_SHIFT); |
| |
| // Align dst to an even 16 byte address (0-7 pixels) |
| while (((((size_t)dst) & 0x0F) != 0) && (count > 0)) { |
| *dst = SkBlend32_RGB16(src_expand, *dst, scale); |
| dst += 1; |
| count--; |
| } |
| |
| dst_wide = reinterpret_cast<__m128i*>(dst); |
| do { |
| // Load eight RGB565 pixels |
| __m128i pixels = _mm_load_si128(dst_wide); |
| |
| // Mask out sub-pixels |
| __m128i pixel_R = _mm_srli_epi16(pixels, SK_R16_SHIFT); |
| __m128i pixel_G = _mm_slli_epi16(pixels, SK_R16_BITS); |
| pixel_G = _mm_srli_epi16(pixel_G, SK_R16_BITS + SK_B16_BITS); |
| __m128i pixel_B = _mm_and_si128(pixels, mask_blue); |
| |
| // Scale with alpha |
| pixel_R = _mm_mullo_epi16(pixel_R, scale_wide); |
| pixel_G = _mm_mullo_epi16(pixel_G, scale_wide); |
| pixel_B = _mm_mullo_epi16(pixel_B, scale_wide); |
| |
| // Add src_X_wide and shift down again |
| pixel_R = _mm_add_epi16(pixel_R, src_R_wide); |
| pixel_R = _mm_srli_epi16(pixel_R, 5); |
| pixel_G = _mm_add_epi16(pixel_G, src_G_wide); |
| pixel_B = _mm_add_epi16(pixel_B, src_B_wide); |
| pixel_B = _mm_srli_epi16(pixel_B, 5); |
| |
| // Combine into RGB565 and store |
| pixel_R = _mm_slli_epi16(pixel_R, SK_R16_SHIFT); |
| pixel_G = _mm_and_si128(pixel_G, mask_green); |
| pixels = _mm_or_si128(pixel_R, pixel_G); |
| pixels = _mm_or_si128(pixels, pixel_B); |
| _mm_store_si128(dst_wide, pixels); |
| count -= 8; |
| dst_wide++; |
| } while (count >= 8); |
| |
| dst = reinterpret_cast<uint16_t*>(dst_wide); |
| } |
| |
| // Small loop to handle remaining pixels. |
| while (count > 0) { |
| *dst = SkBlend32_RGB16(src_expand, *dst, scale); |
| dst += 1; |
| count--; |
| } |
| } |
| |
| // The following (left) shifts cause the top 5 bits of the mask components to |
| // line up with the corresponding components in an SkPMColor. |
| // Note that the mask's RGB16 order may differ from the SkPMColor order. |
| #define SK_R16x5_R32x5_SHIFT (SK_R32_SHIFT - SK_R16_SHIFT - SK_R16_BITS + 5) |
| #define SK_G16x5_G32x5_SHIFT (SK_G32_SHIFT - SK_G16_SHIFT - SK_G16_BITS + 5) |
| #define SK_B16x5_B32x5_SHIFT (SK_B32_SHIFT - SK_B16_SHIFT - SK_B16_BITS + 5) |
| |
| #if SK_R16x5_R32x5_SHIFT == 0 |
| #define SkPackedR16x5ToUnmaskedR32x5_SSE2(x) (x) |
| #elif SK_R16x5_R32x5_SHIFT > 0 |
| #define SkPackedR16x5ToUnmaskedR32x5_SSE2(x) (_mm_slli_epi32(x, SK_R16x5_R32x5_SHIFT)) |
| #else |
| #define SkPackedR16x5ToUnmaskedR32x5_SSE2(x) (_mm_srli_epi32(x, -SK_R16x5_R32x5_SHIFT)) |
| #endif |
| |
| #if SK_G16x5_G32x5_SHIFT == 0 |
| #define SkPackedG16x5ToUnmaskedG32x5_SSE2(x) (x) |
| #elif SK_G16x5_G32x5_SHIFT > 0 |
| #define SkPackedG16x5ToUnmaskedG32x5_SSE2(x) (_mm_slli_epi32(x, SK_G16x5_G32x5_SHIFT)) |
| #else |
| #define SkPackedG16x5ToUnmaskedG32x5_SSE2(x) (_mm_srli_epi32(x, -SK_G16x5_G32x5_SHIFT)) |
| #endif |
| |
| #if SK_B16x5_B32x5_SHIFT == 0 |
| #define SkPackedB16x5ToUnmaskedB32x5_SSE2(x) (x) |
| #elif SK_B16x5_B32x5_SHIFT > 0 |
| #define SkPackedB16x5ToUnmaskedB32x5_SSE2(x) (_mm_slli_epi32(x, SK_B16x5_B32x5_SHIFT)) |
| #else |
| #define SkPackedB16x5ToUnmaskedB32x5_SSE2(x) (_mm_srli_epi32(x, -SK_B16x5_B32x5_SHIFT)) |
| #endif |
| |
| static __m128i SkBlendLCD16_SSE2(__m128i &src, __m128i &dst, |
| __m128i &mask, __m128i &srcA) { |
| // In the following comments, the components of src, dst and mask are |
| // abbreviated as (s)rc, (d)st, and (m)ask. Color components are marked |
| // by an R, G, B, or A suffix. Components of one of the four pixels that |
| // are processed in parallel are marked with 0, 1, 2, and 3. "d1B", for |
| // example is the blue channel of the second destination pixel. Memory |
| // layout is shown for an ARGB byte order in a color value. |
| |
| // src and srcA store 8-bit values interleaved with zeros. |
| // src = (0xFF, 0, sR, 0, sG, 0, sB, 0, 0xFF, 0, sR, 0, sG, 0, sB, 0) |
| // srcA = (srcA, 0, srcA, 0, srcA, 0, srcA, 0, |
| // srcA, 0, srcA, 0, srcA, 0, srcA, 0) |
| // mask stores 16-bit values (compressed three channels) interleaved with zeros. |
| // Lo and Hi denote the low and high bytes of a 16-bit value, respectively. |
| // mask = (m0RGBLo, m0RGBHi, 0, 0, m1RGBLo, m1RGBHi, 0, 0, |
| // m2RGBLo, m2RGBHi, 0, 0, m3RGBLo, m3RGBHi, 0, 0) |
| |
| // Get the R,G,B of each 16bit mask pixel, we want all of them in 5 bits. |
| // r = (0, m0R, 0, 0, 0, m1R, 0, 0, 0, m2R, 0, 0, 0, m3R, 0, 0) |
| __m128i r = _mm_and_si128(SkPackedR16x5ToUnmaskedR32x5_SSE2(mask), |
| _mm_set1_epi32(0x1F << SK_R32_SHIFT)); |
| |
| // g = (0, 0, m0G, 0, 0, 0, m1G, 0, 0, 0, m2G, 0, 0, 0, m3G, 0) |
| __m128i g = _mm_and_si128(SkPackedG16x5ToUnmaskedG32x5_SSE2(mask), |
| _mm_set1_epi32(0x1F << SK_G32_SHIFT)); |
| |
| // b = (0, 0, 0, m0B, 0, 0, 0, m1B, 0, 0, 0, m2B, 0, 0, 0, m3B) |
| __m128i b = _mm_and_si128(SkPackedB16x5ToUnmaskedB32x5_SSE2(mask), |
| _mm_set1_epi32(0x1F << SK_B32_SHIFT)); |
| |
| // Pack the 4 16bit mask pixels into 4 32bit pixels, (p0, p1, p2, p3) |
| // Each component (m0R, m0G, etc.) is then a 5-bit value aligned to an |
| // 8-bit position |
| // mask = (0, m0R, m0G, m0B, 0, m1R, m1G, m1B, |
| // 0, m2R, m2G, m2B, 0, m3R, m3G, m3B) |
| mask = _mm_or_si128(_mm_or_si128(r, g), b); |
| |
| // Interleave R,G,B into the lower byte of word. |
| // i.e. split the sixteen 8-bit values from mask into two sets of eight |
| // 16-bit values, padded by zero. |
| __m128i maskLo, maskHi; |
| // maskLo = (0, 0, m0R, 0, m0G, 0, m0B, 0, 0, 0, m1R, 0, m1G, 0, m1B, 0) |
| maskLo = _mm_unpacklo_epi8(mask, _mm_setzero_si128()); |
| // maskHi = (0, 0, m2R, 0, m2G, 0, m2B, 0, 0, 0, m3R, 0, m3G, 0, m3B, 0) |
| maskHi = _mm_unpackhi_epi8(mask, _mm_setzero_si128()); |
| |
| // Upscale from 0..31 to 0..32 |
| // (allows to replace division by left-shift further down) |
| // Left-shift each component by 4 and add the result back to that component, |
| // mapping numbers in the range 0..15 to 0..15, and 16..31 to 17..32 |
| maskLo = _mm_add_epi16(maskLo, _mm_srli_epi16(maskLo, 4)); |
| maskHi = _mm_add_epi16(maskHi, _mm_srli_epi16(maskHi, 4)); |
| |
| // Multiply each component of maskLo and maskHi by srcA |
| maskLo = _mm_mullo_epi16(maskLo, srcA); |
| maskHi = _mm_mullo_epi16(maskHi, srcA); |
| |
| // Left shift mask components by 8 (divide by 256) |
| maskLo = _mm_srli_epi16(maskLo, 8); |
| maskHi = _mm_srli_epi16(maskHi, 8); |
| |
| // Interleave R,G,B into the lower byte of the word |
| // dstLo = (0, 0, d0R, 0, d0G, 0, d0B, 0, 0, 0, d1R, 0, d1G, 0, d1B, 0) |
| __m128i dstLo = _mm_unpacklo_epi8(dst, _mm_setzero_si128()); |
| // dstLo = (0, 0, d2R, 0, d2G, 0, d2B, 0, 0, 0, d3R, 0, d3G, 0, d3B, 0) |
| __m128i dstHi = _mm_unpackhi_epi8(dst, _mm_setzero_si128()); |
| |
| // mask = (src - dst) * mask |
| maskLo = _mm_mullo_epi16(maskLo, _mm_sub_epi16(src, dstLo)); |
| maskHi = _mm_mullo_epi16(maskHi, _mm_sub_epi16(src, dstHi)); |
| |
| // mask = (src - dst) * mask >> 5 |
| maskLo = _mm_srai_epi16(maskLo, 5); |
| maskHi = _mm_srai_epi16(maskHi, 5); |
| |
| // Add two pixels into result. |
| // result = dst + ((src - dst) * mask >> 5) |
| __m128i resultLo = _mm_add_epi16(dstLo, maskLo); |
| __m128i resultHi = _mm_add_epi16(dstHi, maskHi); |
| |
| // Pack into 4 32bit dst pixels. |
| // resultLo and resultHi contain eight 16-bit components (two pixels) each. |
| // Merge into one SSE regsiter with sixteen 8-bit values (four pixels), |
| // clamping to 255 if necessary. |
| return _mm_packus_epi16(resultLo, resultHi); |
| } |
| |
| static __m128i SkBlendLCD16Opaque_SSE2(__m128i &src, __m128i &dst, |
| __m128i &mask) { |
| // In the following comments, the components of src, dst and mask are |
| // abbreviated as (s)rc, (d)st, and (m)ask. Color components are marked |
| // by an R, G, B, or A suffix. Components of one of the four pixels that |
| // are processed in parallel are marked with 0, 1, 2, and 3. "d1B", for |
| // example is the blue channel of the second destination pixel. Memory |
| // layout is shown for an ARGB byte order in a color value. |
| |
| // src and srcA store 8-bit values interleaved with zeros. |
| // src = (0xFF, 0, sR, 0, sG, 0, sB, 0, 0xFF, 0, sR, 0, sG, 0, sB, 0) |
| // mask stores 16-bit values (shown as high and low bytes) interleaved with |
| // zeros |
| // mask = (m0RGBLo, m0RGBHi, 0, 0, m1RGBLo, m1RGBHi, 0, 0, |
| // m2RGBLo, m2RGBHi, 0, 0, m3RGBLo, m3RGBHi, 0, 0) |
| |
| // Get the R,G,B of each 16bit mask pixel, we want all of them in 5 bits. |
| // r = (0, m0R, 0, 0, 0, m1R, 0, 0, 0, m2R, 0, 0, 0, m3R, 0, 0) |
| __m128i r = _mm_and_si128(SkPackedR16x5ToUnmaskedR32x5_SSE2(mask), |
| _mm_set1_epi32(0x1F << SK_R32_SHIFT)); |
| |
| // g = (0, 0, m0G, 0, 0, 0, m1G, 0, 0, 0, m2G, 0, 0, 0, m3G, 0) |
| __m128i g = _mm_and_si128(SkPackedG16x5ToUnmaskedG32x5_SSE2(mask), |
| _mm_set1_epi32(0x1F << SK_G32_SHIFT)); |
| |
| // b = (0, 0, 0, m0B, 0, 0, 0, m1B, 0, 0, 0, m2B, 0, 0, 0, m3B) |
| __m128i b = _mm_and_si128(SkPackedB16x5ToUnmaskedB32x5_SSE2(mask), |
| _mm_set1_epi32(0x1F << SK_B32_SHIFT)); |
| |
| // Pack the 4 16bit mask pixels into 4 32bit pixels, (p0, p1, p2, p3) |
| // Each component (m0R, m0G, etc.) is then a 5-bit value aligned to an |
| // 8-bit position |
| // mask = (0, m0R, m0G, m0B, 0, m1R, m1G, m1B, |
| // 0, m2R, m2G, m2B, 0, m3R, m3G, m3B) |
| mask = _mm_or_si128(_mm_or_si128(r, g), b); |
| |
| // Interleave R,G,B into the lower byte of word. |
| // i.e. split the sixteen 8-bit values from mask into two sets of eight |
| // 16-bit values, padded by zero. |
| __m128i maskLo, maskHi; |
| // maskLo = (0, 0, m0R, 0, m0G, 0, m0B, 0, 0, 0, m1R, 0, m1G, 0, m1B, 0) |
| maskLo = _mm_unpacklo_epi8(mask, _mm_setzero_si128()); |
| // maskHi = (0, 0, m2R, 0, m2G, 0, m2B, 0, 0, 0, m3R, 0, m3G, 0, m3B, 0) |
| maskHi = _mm_unpackhi_epi8(mask, _mm_setzero_si128()); |
| |
| // Upscale from 0..31 to 0..32 |
| // (allows to replace division by left-shift further down) |
| // Left-shift each component by 4 and add the result back to that component, |
| // mapping numbers in the range 0..15 to 0..15, and 16..31 to 17..32 |
| maskLo = _mm_add_epi16(maskLo, _mm_srli_epi16(maskLo, 4)); |
| maskHi = _mm_add_epi16(maskHi, _mm_srli_epi16(maskHi, 4)); |
| |
| // Interleave R,G,B into the lower byte of the word |
| // dstLo = (0, 0, d0R, 0, d0G, 0, d0B, 0, 0, 0, d1R, 0, d1G, 0, d1B, 0) |
| __m128i dstLo = _mm_unpacklo_epi8(dst, _mm_setzero_si128()); |
| // dstLo = (0, 0, d2R, 0, d2G, 0, d2B, 0, 0, 0, d3R, 0, d3G, 0, d3B, 0) |
| __m128i dstHi = _mm_unpackhi_epi8(dst, _mm_setzero_si128()); |
| |
| // mask = (src - dst) * mask |
| maskLo = _mm_mullo_epi16(maskLo, _mm_sub_epi16(src, dstLo)); |
| maskHi = _mm_mullo_epi16(maskHi, _mm_sub_epi16(src, dstHi)); |
| |
| // mask = (src - dst) * mask >> 5 |
| maskLo = _mm_srai_epi16(maskLo, 5); |
| maskHi = _mm_srai_epi16(maskHi, 5); |
| |
| // Add two pixels into result. |
| // result = dst + ((src - dst) * mask >> 5) |
| __m128i resultLo = _mm_add_epi16(dstLo, maskLo); |
| __m128i resultHi = _mm_add_epi16(dstHi, maskHi); |
| |
| // Pack into 4 32bit dst pixels and force opaque. |
| // resultLo and resultHi contain eight 16-bit components (two pixels) each. |
| // Merge into one SSE regsiter with sixteen 8-bit values (four pixels), |
| // clamping to 255 if necessary. Set alpha components to 0xFF. |
| return _mm_or_si128(_mm_packus_epi16(resultLo, resultHi), |
| _mm_set1_epi32(SK_A32_MASK << SK_A32_SHIFT)); |
| } |
| |
| void SkBlitLCD16Row_SSE2(SkPMColor dst[], const uint16_t mask[], |
| SkColor src, int width, SkPMColor) { |
| if (width <= 0) { |
| return; |
| } |
| |
| int srcA = SkColorGetA(src); |
| int srcR = SkColorGetR(src); |
| int srcG = SkColorGetG(src); |
| int srcB = SkColorGetB(src); |
| |
| srcA = SkAlpha255To256(srcA); |
| |
| if (width >= 4) { |
| SkASSERT(((size_t)dst & 0x03) == 0); |
| while (((size_t)dst & 0x0F) != 0) { |
| *dst = SkBlendLCD16(srcA, srcR, srcG, srcB, *dst, *mask); |
| mask++; |
| dst++; |
| width--; |
| } |
| |
| __m128i *d = reinterpret_cast<__m128i*>(dst); |
| // Set alpha to 0xFF and replicate source four times in SSE register. |
| __m128i src_sse = _mm_set1_epi32(SkPackARGB32(0xFF, srcR, srcG, srcB)); |
| // Interleave with zeros to get two sets of four 16-bit values. |
| src_sse = _mm_unpacklo_epi8(src_sse, _mm_setzero_si128()); |
| // Set srcA_sse to contain eight copies of srcA, padded with zero. |
| // src_sse=(0xFF, 0, sR, 0, sG, 0, sB, 0, 0xFF, 0, sR, 0, sG, 0, sB, 0) |
| __m128i srcA_sse = _mm_set1_epi16(srcA); |
| while (width >= 4) { |
| // Load four destination pixels into dst_sse. |
| __m128i dst_sse = _mm_load_si128(d); |
| // Load four 16-bit masks into lower half of mask_sse. |
| __m128i mask_sse = _mm_loadl_epi64( |
| reinterpret_cast<const __m128i*>(mask)); |
| |
| // Check whether masks are equal to 0 and get the highest bit |
| // of each byte of result, if masks are all zero, we will get |
| // pack_cmp to 0xFFFF |
| int pack_cmp = _mm_movemask_epi8(_mm_cmpeq_epi16(mask_sse, |
| _mm_setzero_si128())); |
| |
| // if mask pixels are not all zero, we will blend the dst pixels |
| if (pack_cmp != 0xFFFF) { |
| // Unpack 4 16bit mask pixels to |
| // mask_sse = (m0RGBLo, m0RGBHi, 0, 0, m1RGBLo, m1RGBHi, 0, 0, |
| // m2RGBLo, m2RGBHi, 0, 0, m3RGBLo, m3RGBHi, 0, 0) |
| mask_sse = _mm_unpacklo_epi16(mask_sse, |
| _mm_setzero_si128()); |
| |
| // Process 4 32bit dst pixels |
| __m128i result = SkBlendLCD16_SSE2(src_sse, dst_sse, |
| mask_sse, srcA_sse); |
| _mm_store_si128(d, result); |
| } |
| |
| d++; |
| mask += 4; |
| width -= 4; |
| } |
| |
| dst = reinterpret_cast<SkPMColor*>(d); |
| } |
| |
| while (width > 0) { |
| *dst = SkBlendLCD16(srcA, srcR, srcG, srcB, *dst, *mask); |
| mask++; |
| dst++; |
| width--; |
| } |
| } |
| |
| void SkBlitLCD16OpaqueRow_SSE2(SkPMColor dst[], const uint16_t mask[], |
| SkColor src, int width, SkPMColor opaqueDst) { |
| if (width <= 0) { |
| return; |
| } |
| |
| int srcR = SkColorGetR(src); |
| int srcG = SkColorGetG(src); |
| int srcB = SkColorGetB(src); |
| |
| if (width >= 4) { |
| SkASSERT(((size_t)dst & 0x03) == 0); |
| while (((size_t)dst & 0x0F) != 0) { |
| *dst = SkBlendLCD16Opaque(srcR, srcG, srcB, *dst, *mask, opaqueDst); |
| mask++; |
| dst++; |
| width--; |
| } |
| |
| __m128i *d = reinterpret_cast<__m128i*>(dst); |
| // Set alpha to 0xFF and replicate source four times in SSE register. |
| __m128i src_sse = _mm_set1_epi32(SkPackARGB32(0xFF, srcR, srcG, srcB)); |
| // Set srcA_sse to contain eight copies of srcA, padded with zero. |
| // src_sse=(0xFF, 0, sR, 0, sG, 0, sB, 0, 0xFF, 0, sR, 0, sG, 0, sB, 0) |
| src_sse = _mm_unpacklo_epi8(src_sse, _mm_setzero_si128()); |
| while (width >= 4) { |
| // Load four destination pixels into dst_sse. |
| __m128i dst_sse = _mm_load_si128(d); |
| // Load four 16-bit masks into lower half of mask_sse. |
| __m128i mask_sse = _mm_loadl_epi64( |
| reinterpret_cast<const __m128i*>(mask)); |
| |
| // Check whether masks are equal to 0 and get the highest bit |
| // of each byte of result, if masks are all zero, we will get |
| // pack_cmp to 0xFFFF |
| int pack_cmp = _mm_movemask_epi8(_mm_cmpeq_epi16(mask_sse, |
| _mm_setzero_si128())); |
| |
| // if mask pixels are not all zero, we will blend the dst pixels |
| if (pack_cmp != 0xFFFF) { |
| // Unpack 4 16bit mask pixels to |
| // mask_sse = (m0RGBLo, m0RGBHi, 0, 0, m1RGBLo, m1RGBHi, 0, 0, |
| // m2RGBLo, m2RGBHi, 0, 0, m3RGBLo, m3RGBHi, 0, 0) |
| mask_sse = _mm_unpacklo_epi16(mask_sse, |
| _mm_setzero_si128()); |
| |
| // Process 4 32bit dst pixels |
| __m128i result = SkBlendLCD16Opaque_SSE2(src_sse, dst_sse, |
| mask_sse); |
| _mm_store_si128(d, result); |
| } |
| |
| d++; |
| mask += 4; |
| width -= 4; |
| } |
| |
| dst = reinterpret_cast<SkPMColor*>(d); |
| } |
| |
| while (width > 0) { |
| *dst = SkBlendLCD16Opaque(srcR, srcG, srcB, *dst, *mask, opaqueDst); |
| mask++; |
| dst++; |
| width--; |
| } |
| } |
| |
| /* SSE2 version of S32_D565_Opaque() |
| * portable version is in core/SkBlitRow_D16.cpp |
| */ |
| void S32_D565_Opaque_SSE2(uint16_t* SK_RESTRICT dst, |
| const SkPMColor* SK_RESTRICT src, int count, |
| U8CPU alpha, int /*x*/, int /*y*/) { |
| SkASSERT(255 == alpha); |
| |
| if (count <= 0) { |
| return; |
| } |
| |
| if (count >= 8) { |
| while (((size_t)dst & 0x0F) != 0) { |
| SkPMColor c = *src++; |
| SkPMColorAssert(c); |
| |
| *dst++ = SkPixel32ToPixel16_ToU16(c); |
| count--; |
| } |
| |
| const __m128i* s = reinterpret_cast<const __m128i*>(src); |
| __m128i* d = reinterpret_cast<__m128i*>(dst); |
| |
| while (count >= 8) { |
| // Load 8 pixels of src. |
| __m128i src_pixel1 = _mm_loadu_si128(s++); |
| __m128i src_pixel2 = _mm_loadu_si128(s++); |
| |
| __m128i d_pixel = SkPixel32ToPixel16_ToU16_SSE2(src_pixel1, src_pixel2); |
| _mm_store_si128(d++, d_pixel); |
| count -= 8; |
| } |
| src = reinterpret_cast<const SkPMColor*>(s); |
| dst = reinterpret_cast<uint16_t*>(d); |
| } |
| |
| if (count > 0) { |
| do { |
| SkPMColor c = *src++; |
| SkPMColorAssert(c); |
| *dst++ = SkPixel32ToPixel16_ToU16(c); |
| } while (--count != 0); |
| } |
| } |
| |
| /* SSE2 version of S32A_D565_Opaque() |
| * portable version is in core/SkBlitRow_D16.cpp |
| */ |
| void S32A_D565_Opaque_SSE2(uint16_t* SK_RESTRICT dst, |
| const SkPMColor* SK_RESTRICT src, |
| int count, U8CPU alpha, int /*x*/, int /*y*/) { |
| SkASSERT(255 == alpha); |
| |
| if (count <= 0) { |
| return; |
| } |
| |
| if (count >= 8) { |
| // Make dst 16 bytes alignment |
| while (((size_t)dst & 0x0F) != 0) { |
| SkPMColor c = *src++; |
| if (c) { |
| *dst = SkSrcOver32To16(c, *dst); |
| } |
| dst += 1; |
| count--; |
| } |
| |
| const __m128i* s = reinterpret_cast<const __m128i*>(src); |
| __m128i* d = reinterpret_cast<__m128i*>(dst); |
| __m128i var255 = _mm_set1_epi16(255); |
| __m128i r16_mask = _mm_set1_epi16(SK_R16_MASK); |
| __m128i g16_mask = _mm_set1_epi16(SK_G16_MASK); |
| __m128i b16_mask = _mm_set1_epi16(SK_B16_MASK); |
| |
| while (count >= 8) { |
| // Load 8 pixels of src. |
| __m128i src_pixel1 = _mm_loadu_si128(s++); |
| __m128i src_pixel2 = _mm_loadu_si128(s++); |
| |
| // Check whether src pixels are equal to 0 and get the highest bit |
| // of each byte of result, if src pixels are all zero, src_cmp1 and |
| // src_cmp2 will be 0xFFFF. |
| int src_cmp1 = _mm_movemask_epi8(_mm_cmpeq_epi16(src_pixel1, |
| _mm_setzero_si128())); |
| int src_cmp2 = _mm_movemask_epi8(_mm_cmpeq_epi16(src_pixel2, |
| _mm_setzero_si128())); |
| if (src_cmp1 == 0xFFFF && src_cmp2 == 0xFFFF) { |
| d++; |
| count -= 8; |
| continue; |
| } |
| |
| // Load 8 pixels of dst. |
| __m128i dst_pixel = _mm_load_si128(d); |
| |
| // Extract A from src. |
| __m128i sa1 = _mm_slli_epi32(src_pixel1, (24 - SK_A32_SHIFT)); |
| sa1 = _mm_srli_epi32(sa1, 24); |
| __m128i sa2 = _mm_slli_epi32(src_pixel2, (24 - SK_A32_SHIFT)); |
| sa2 = _mm_srli_epi32(sa2, 24); |
| __m128i sa = _mm_packs_epi32(sa1, sa2); |
| |
| // Extract R from src. |
| __m128i sr1 = _mm_slli_epi32(src_pixel1, (24 - SK_R32_SHIFT)); |
| sr1 = _mm_srli_epi32(sr1, 24); |
| __m128i sr2 = _mm_slli_epi32(src_pixel2, (24 - SK_R32_SHIFT)); |
| sr2 = _mm_srli_epi32(sr2, 24); |
| __m128i sr = _mm_packs_epi32(sr1, sr2); |
| |
| // Extract G from src. |
| __m128i sg1 = _mm_slli_epi32(src_pixel1, (24 - SK_G32_SHIFT)); |
| sg1 = _mm_srli_epi32(sg1, 24); |
| __m128i sg2 = _mm_slli_epi32(src_pixel2, (24 - SK_G32_SHIFT)); |
| sg2 = _mm_srli_epi32(sg2, 24); |
| __m128i sg = _mm_packs_epi32(sg1, sg2); |
| |
| // Extract B from src. |
| __m128i sb1 = _mm_slli_epi32(src_pixel1, (24 - SK_B32_SHIFT)); |
| sb1 = _mm_srli_epi32(sb1, 24); |
| __m128i sb2 = _mm_slli_epi32(src_pixel2, (24 - SK_B32_SHIFT)); |
| sb2 = _mm_srli_epi32(sb2, 24); |
| __m128i sb = _mm_packs_epi32(sb1, sb2); |
| |
| // Extract R G B from dst. |
| __m128i dr = _mm_srli_epi16(dst_pixel, SK_R16_SHIFT); |
| dr = _mm_and_si128(dr, r16_mask); |
| __m128i dg = _mm_srli_epi16(dst_pixel, SK_G16_SHIFT); |
| dg = _mm_and_si128(dg, g16_mask); |
| __m128i db = _mm_srli_epi16(dst_pixel, SK_B16_SHIFT); |
| db = _mm_and_si128(db, b16_mask); |
| |
| __m128i isa = _mm_sub_epi16(var255, sa); // 255 -sa |
| |
| // Calculate R G B of result. |
| // Original algorithm is in SkSrcOver32To16(). |
| dr = _mm_add_epi16(sr, SkMul16ShiftRound_SSE2(dr, isa, SK_R16_BITS)); |
| dr = _mm_srli_epi16(dr, 8 - SK_R16_BITS); |
| dg = _mm_add_epi16(sg, SkMul16ShiftRound_SSE2(dg, isa, SK_G16_BITS)); |
| dg = _mm_srli_epi16(dg, 8 - SK_G16_BITS); |
| db = _mm_add_epi16(sb, SkMul16ShiftRound_SSE2(db, isa, SK_B16_BITS)); |
| db = _mm_srli_epi16(db, 8 - SK_B16_BITS); |
| |
| // Pack R G B into 16-bit color. |
| __m128i d_pixel = SkPackRGB16_SSE2(dr, dg, db); |
| |
| // Store 8 16-bit colors in dst. |
| _mm_store_si128(d++, d_pixel); |
| count -= 8; |
| } |
| |
| src = reinterpret_cast<const SkPMColor*>(s); |
| dst = reinterpret_cast<uint16_t*>(d); |
| } |
| |
| if (count > 0) { |
| do { |
| SkPMColor c = *src++; |
| SkPMColorAssert(c); |
| if (c) { |
| *dst = SkSrcOver32To16(c, *dst); |
| } |
| dst += 1; |
| } while (--count != 0); |
| } |
| } |
| |
| void S32_D565_Opaque_Dither_SSE2(uint16_t* SK_RESTRICT dst, |
| const SkPMColor* SK_RESTRICT src, |
| int count, U8CPU alpha, int x, int y) { |
| SkASSERT(255 == alpha); |
| |
| if (count <= 0) { |
| return; |
| } |
| |
| if (count >= 8) { |
| while (((size_t)dst & 0x0F) != 0) { |
| DITHER_565_SCAN(y); |
| SkPMColor c = *src++; |
| SkPMColorAssert(c); |
| |
| unsigned dither = DITHER_VALUE(x); |
| *dst++ = SkDitherRGB32To565(c, dither); |
| DITHER_INC_X(x); |
| count--; |
| } |
| |
| unsigned short dither_value[8]; |
| __m128i dither; |
| #ifdef ENABLE_DITHER_MATRIX_4X4 |
| const uint8_t* dither_scan = gDitherMatrix_3Bit_4X4[(y) & 3]; |
| dither_value[0] = dither_value[4] = dither_scan[(x) & 3]; |
| dither_value[1] = dither_value[5] = dither_scan[(x + 1) & 3]; |
| dither_value[2] = dither_value[6] = dither_scan[(x + 2) & 3]; |
| dither_value[3] = dither_value[7] = dither_scan[(x + 3) & 3]; |
| #else |
| const uint16_t dither_scan = gDitherMatrix_3Bit_16[(y) & 3]; |
| dither_value[0] = dither_value[4] = (dither_scan |
| >> (((x) & 3) << 2)) & 0xF; |
| dither_value[1] = dither_value[5] = (dither_scan |
| >> (((x + 1) & 3) << 2)) & 0xF; |
| dither_value[2] = dither_value[6] = (dither_scan |
| >> (((x + 2) & 3) << 2)) & 0xF; |
| dither_value[3] = dither_value[7] = (dither_scan |
| >> (((x + 3) & 3) << 2)) & 0xF; |
| #endif |
| dither = _mm_loadu_si128((__m128i*) dither_value); |
| |
| const __m128i* s = reinterpret_cast<const __m128i*>(src); |
| __m128i* d = reinterpret_cast<__m128i*>(dst); |
| |
| while (count >= 8) { |
| // Load 8 pixels of src. |
| __m128i src_pixel1 = _mm_loadu_si128(s++); |
| __m128i src_pixel2 = _mm_loadu_si128(s++); |
| |
| // Extract R from src. |
| __m128i sr1 = _mm_slli_epi32(src_pixel1, (24 - SK_R32_SHIFT)); |
| sr1 = _mm_srli_epi32(sr1, 24); |
| __m128i sr2 = _mm_slli_epi32(src_pixel2, (24 - SK_R32_SHIFT)); |
| sr2 = _mm_srli_epi32(sr2, 24); |
| __m128i sr = _mm_packs_epi32(sr1, sr2); |
| |
| // SkDITHER_R32To565(sr, dither) |
| __m128i sr_offset = _mm_srli_epi16(sr, 5); |
| sr = _mm_add_epi16(sr, dither); |
| sr = _mm_sub_epi16(sr, sr_offset); |
| sr = _mm_srli_epi16(sr, SK_R32_BITS - SK_R16_BITS); |
| |
| // Extract G from src. |
| __m128i sg1 = _mm_slli_epi32(src_pixel1, (24 - SK_G32_SHIFT)); |
| sg1 = _mm_srli_epi32(sg1, 24); |
| __m128i sg2 = _mm_slli_epi32(src_pixel2, (24 - SK_G32_SHIFT)); |
| sg2 = _mm_srli_epi32(sg2, 24); |
| __m128i sg = _mm_packs_epi32(sg1, sg2); |
| |
| // SkDITHER_R32To565(sg, dither) |
| __m128i sg_offset = _mm_srli_epi16(sg, 6); |
| sg = _mm_add_epi16(sg, _mm_srli_epi16(dither, 1)); |
| sg = _mm_sub_epi16(sg, sg_offset); |
| sg = _mm_srli_epi16(sg, SK_G32_BITS - SK_G16_BITS); |
| |
| // Extract B from src. |
| __m128i sb1 = _mm_slli_epi32(src_pixel1, (24 - SK_B32_SHIFT)); |
| sb1 = _mm_srli_epi32(sb1, 24); |
| __m128i sb2 = _mm_slli_epi32(src_pixel2, (24 - SK_B32_SHIFT)); |
| sb2 = _mm_srli_epi32(sb2, 24); |
| __m128i sb = _mm_packs_epi32(sb1, sb2); |
| |
| // SkDITHER_R32To565(sb, dither) |
| __m128i sb_offset = _mm_srli_epi16(sb, 5); |
| sb = _mm_add_epi16(sb, dither); |
| sb = _mm_sub_epi16(sb, sb_offset); |
| sb = _mm_srli_epi16(sb, SK_B32_BITS - SK_B16_BITS); |
| |
| // Pack and store 16-bit dst pixel. |
| __m128i d_pixel = SkPackRGB16_SSE2(sr, sg, sb); |
| _mm_store_si128(d++, d_pixel); |
| |
| count -= 8; |
| x += 8; |
| } |
| |
| src = reinterpret_cast<const SkPMColor*>(s); |
| dst = reinterpret_cast<uint16_t*>(d); |
| } |
| |
| if (count > 0) { |
| DITHER_565_SCAN(y); |
| do { |
| SkPMColor c = *src++; |
| SkPMColorAssert(c); |
| |
| unsigned dither = DITHER_VALUE(x); |
| *dst++ = SkDitherRGB32To565(c, dither); |
| DITHER_INC_X(x); |
| } while (--count != 0); |
| } |
| } |
| |
| /* SSE2 version of S32A_D565_Opaque_Dither() |
| * portable version is in core/SkBlitRow_D16.cpp |
| */ |
| void S32A_D565_Opaque_Dither_SSE2(uint16_t* SK_RESTRICT dst, |
| const SkPMColor* SK_RESTRICT src, |
| int count, U8CPU alpha, int x, int y) { |
| SkASSERT(255 == alpha); |
| |
| if (count <= 0) { |
| return; |
| } |
| |
| if (count >= 8) { |
| while (((size_t)dst & 0x0F) != 0) { |
| DITHER_565_SCAN(y); |
| SkPMColor c = *src++; |
| SkPMColorAssert(c); |
| if (c) { |
| unsigned a = SkGetPackedA32(c); |
| |
| int d = SkAlphaMul(DITHER_VALUE(x), SkAlpha255To256(a)); |
| |
| unsigned sr = SkGetPackedR32(c); |
| unsigned sg = SkGetPackedG32(c); |
| unsigned sb = SkGetPackedB32(c); |
| sr = SkDITHER_R32_FOR_565(sr, d); |
| sg = SkDITHER_G32_FOR_565(sg, d); |
| sb = SkDITHER_B32_FOR_565(sb, d); |
| |
| uint32_t src_expanded = (sg << 24) | (sr << 13) | (sb << 2); |
| uint32_t dst_expanded = SkExpand_rgb_16(*dst); |
| dst_expanded = dst_expanded * (SkAlpha255To256(255 - a) >> 3); |
| // now src and dst expanded are in g:11 r:10 x:1 b:10 |
| *dst = SkCompact_rgb_16((src_expanded + dst_expanded) >> 5); |
| } |
| dst += 1; |
| DITHER_INC_X(x); |
| count--; |
| } |
| |
| unsigned short dither_value[8]; |
| __m128i dither, dither_cur; |
| #ifdef ENABLE_DITHER_MATRIX_4X4 |
| const uint8_t* dither_scan = gDitherMatrix_3Bit_4X4[(y) & 3]; |
| dither_value[0] = dither_value[4] = dither_scan[(x) & 3]; |
| dither_value[1] = dither_value[5] = dither_scan[(x + 1) & 3]; |
| dither_value[2] = dither_value[6] = dither_scan[(x + 2) & 3]; |
| dither_value[3] = dither_value[7] = dither_scan[(x + 3) & 3]; |
| #else |
| const uint16_t dither_scan = gDitherMatrix_3Bit_16[(y) & 3]; |
| dither_value[0] = dither_value[4] = (dither_scan |
| >> (((x) & 3) << 2)) & 0xF; |
| dither_value[1] = dither_value[5] = (dither_scan |
| >> (((x + 1) & 3) << 2)) & 0xF; |
| dither_value[2] = dither_value[6] = (dither_scan |
| >> (((x + 2) & 3) << 2)) & 0xF; |
| dither_value[3] = dither_value[7] = (dither_scan |
| >> (((x + 3) & 3) << 2)) & 0xF; |
| #endif |
| dither = _mm_loadu_si128((__m128i*) dither_value); |
| |
| const __m128i* s = reinterpret_cast<const __m128i*>(src); |
| __m128i* d = reinterpret_cast<__m128i*>(dst); |
| __m128i var256 = _mm_set1_epi16(256); |
| __m128i r16_mask = _mm_set1_epi16(SK_R16_MASK); |
| __m128i g16_mask = _mm_set1_epi16(SK_G16_MASK); |
| __m128i b16_mask = _mm_set1_epi16(SK_B16_MASK); |
| |
| while (count >= 8) { |
| // Load 8 pixels of src and dst. |
| __m128i src_pixel1 = _mm_loadu_si128(s++); |
| __m128i src_pixel2 = _mm_loadu_si128(s++); |
| __m128i dst_pixel = _mm_load_si128(d); |
| |
| // Extract A from src. |
| __m128i sa1 = _mm_slli_epi32(src_pixel1, (24 - SK_A32_SHIFT)); |
| sa1 = _mm_srli_epi32(sa1, 24); |
| __m128i sa2 = _mm_slli_epi32(src_pixel2, (24 - SK_A32_SHIFT)); |
| sa2 = _mm_srli_epi32(sa2, 24); |
| __m128i sa = _mm_packs_epi32(sa1, sa2); |
| |
| // Calculate current dither value. |
| dither_cur = _mm_mullo_epi16(dither, |
| _mm_add_epi16(sa, _mm_set1_epi16(1))); |
| dither_cur = _mm_srli_epi16(dither_cur, 8); |
| |
| // Extract R from src. |
| __m128i sr1 = _mm_slli_epi32(src_pixel1, (24 - SK_R32_SHIFT)); |
| sr1 = _mm_srli_epi32(sr1, 24); |
| __m128i sr2 = _mm_slli_epi32(src_pixel2, (24 - SK_R32_SHIFT)); |
| sr2 = _mm_srli_epi32(sr2, 24); |
| __m128i sr = _mm_packs_epi32(sr1, sr2); |
| |
| // SkDITHER_R32_FOR_565(sr, d) |
| __m128i sr_offset = _mm_srli_epi16(sr, 5); |
| sr = _mm_add_epi16(sr, dither_cur); |
| sr = _mm_sub_epi16(sr, sr_offset); |
| |
| // Expand sr. |
| sr = _mm_slli_epi16(sr, 2); |
| |
| // Extract G from src. |
| __m128i sg1 = _mm_slli_epi32(src_pixel1, (24 - SK_G32_SHIFT)); |
| sg1 = _mm_srli_epi32(sg1, 24); |
| __m128i sg2 = _mm_slli_epi32(src_pixel2, (24 - SK_G32_SHIFT)); |
| sg2 = _mm_srli_epi32(sg2, 24); |
| __m128i sg = _mm_packs_epi32(sg1, sg2); |
| |
| // sg = SkDITHER_G32_FOR_565(sg, d). |
| __m128i sg_offset = _mm_srli_epi16(sg, 6); |
| sg = _mm_add_epi16(sg, _mm_srli_epi16(dither_cur, 1)); |
| sg = _mm_sub_epi16(sg, sg_offset); |
| |
| // Expand sg. |
| sg = _mm_slli_epi16(sg, 3); |
| |
| // Extract B from src. |
| __m128i sb1 = _mm_slli_epi32(src_pixel1, (24 - SK_B32_SHIFT)); |
| sb1 = _mm_srli_epi32(sb1, 24); |
| __m128i sb2 = _mm_slli_epi32(src_pixel2, (24 - SK_B32_SHIFT)); |
| sb2 = _mm_srli_epi32(sb2, 24); |
| __m128i sb = _mm_packs_epi32(sb1, sb2); |
| |
| // sb = SkDITHER_B32_FOR_565(sb, d). |
| __m128i sb_offset = _mm_srli_epi16(sb, 5); |
| sb = _mm_add_epi16(sb, dither_cur); |
| sb = _mm_sub_epi16(sb, sb_offset); |
| |
| // Expand sb. |
| sb = _mm_slli_epi16(sb, 2); |
| |
| // Extract R G B from dst. |
| __m128i dr = _mm_srli_epi16(dst_pixel, SK_R16_SHIFT); |
| dr = _mm_and_si128(dr, r16_mask); |
| __m128i dg = _mm_srli_epi16(dst_pixel, SK_G16_SHIFT); |
| dg = _mm_and_si128(dg, g16_mask); |
| __m128i db = _mm_srli_epi16(dst_pixel, SK_B16_SHIFT); |
| db = _mm_and_si128(db, b16_mask); |
| |
| // SkAlpha255To256(255 - a) >> 3 |
| __m128i isa = _mm_sub_epi16(var256, sa); |
| isa = _mm_srli_epi16(isa, 3); |
| |
| dr = _mm_mullo_epi16(dr, isa); |
| dr = _mm_add_epi16(dr, sr); |
| dr = _mm_srli_epi16(dr, 5); |
| |
| dg = _mm_mullo_epi16(dg, isa); |
| dg = _mm_add_epi16(dg, sg); |
| dg = _mm_srli_epi16(dg, 5); |
| |
| db = _mm_mullo_epi16(db, isa); |
| db = _mm_add_epi16(db, sb); |
| db = _mm_srli_epi16(db, 5); |
| |
| // Package and store dst pixel. |
| __m128i d_pixel = SkPackRGB16_SSE2(dr, dg, db); |
| _mm_store_si128(d++, d_pixel); |
| |
| count -= 8; |
| x += 8; |
| } |
| |
| src = reinterpret_cast<const SkPMColor*>(s); |
| dst = reinterpret_cast<uint16_t*>(d); |
| } |
| |
| if (count > 0) { |
| DITHER_565_SCAN(y); |
| do { |
| SkPMColor c = *src++; |
| SkPMColorAssert(c); |
| if (c) { |
| unsigned a = SkGetPackedA32(c); |
| |
| int d = SkAlphaMul(DITHER_VALUE(x), SkAlpha255To256(a)); |
| |
| unsigned sr = SkGetPackedR32(c); |
| unsigned sg = SkGetPackedG32(c); |
| unsigned sb = SkGetPackedB32(c); |
| sr = SkDITHER_R32_FOR_565(sr, d); |
| sg = SkDITHER_G32_FOR_565(sg, d); |
| sb = SkDITHER_B32_FOR_565(sb, d); |
| |
| uint32_t src_expanded = (sg << 24) | (sr << 13) | (sb << 2); |
| uint32_t dst_expanded = SkExpand_rgb_16(*dst); |
| dst_expanded = dst_expanded * (SkAlpha255To256(255 - a) >> 3); |
| // now src and dst expanded are in g:11 r:10 x:1 b:10 |
| *dst = SkCompact_rgb_16((src_expanded + dst_expanded) >> 5); |
| } |
| dst += 1; |
| DITHER_INC_X(x); |
| } while (--count != 0); |
| } |
| } |