| /* vim: set ts=8 sw=8 noexpandtab: */ |
| // qcms |
| // Copyright (C) 2009 Mozilla Foundation |
| // Copyright (C) 1998-2007 Marti Maria |
| // |
| // Permission is hereby granted, free of charge, to any person obtaining |
| // a copy of this software and associated documentation files (the "Software"), |
| // to deal in the Software without restriction, including without limitation |
| // the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| // and/or sell copies of the Software, and to permit persons to whom the Software |
| // is furnished to do so, subject to the following conditions: |
| // |
| // The above copyright notice and this permission notice shall be included in |
| // all copies or substantial portions of the Software. |
| // |
| // THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| // EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO |
| // THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| // NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE |
| // LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION |
| // OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION |
| // WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| |
| #include <math.h> |
| #include <assert.h> |
| #include <stdlib.h> |
| #include <string.h> //memset |
| #include "qcmsint.h" |
| |
| /* It might be worth having a unified limit on content controlled |
| * allocation per profile. This would remove the need for many |
| * of the arbitrary limits that we used */ |
| |
| typedef uint32_t be32; |
| typedef uint16_t be16; |
| |
| #if 0 |
| not used yet |
| /* __builtin_bswap isn't available in older gccs |
| * so open code it for now */ |
| static be32 cpu_to_be32(int32_t v) |
| { |
| #ifdef IS_LITTLE_ENDIAN |
| return ((v & 0xff) << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | ((v & 0xff000000) >> 24); |
| //return __builtin_bswap32(v); |
| return v; |
| #endif |
| } |
| #endif |
| |
| static uint32_t be32_to_cpu(be32 v) |
| { |
| #ifdef IS_LITTLE_ENDIAN |
| return ((v & 0xff) << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | ((v & 0xff000000) >> 24); |
| //return __builtin_bswap32(v); |
| #else |
| return v; |
| #endif |
| } |
| |
| static uint16_t be16_to_cpu(be16 v) |
| { |
| #ifdef IS_LITTLE_ENDIAN |
| return ((v & 0xff) << 8) | ((v & 0xff00) >> 8); |
| #else |
| return v; |
| #endif |
| } |
| |
| /* a wrapper around the memory that we are going to parse |
| * into a qcms_profile */ |
| struct mem_source |
| { |
| const unsigned char *buf; |
| size_t size; |
| qcms_bool valid; |
| const char *invalid_reason; |
| }; |
| |
| static void invalid_source(struct mem_source *mem, const char *reason) |
| { |
| mem->valid = false; |
| mem->invalid_reason = reason; |
| } |
| |
| static uint32_t read_u32(struct mem_source *mem, size_t offset) |
| { |
| /* Subtract from mem->size instead of the more intuitive adding to offset. |
| * This avoids overflowing offset. The subtraction is safe because |
| * mem->size is guaranteed to be > 4 */ |
| if (offset > mem->size - 4) { |
| invalid_source(mem, "Invalid offset"); |
| return 0; |
| } else { |
| be32 k; |
| memcpy(&k, mem->buf + offset, sizeof(k)); |
| return be32_to_cpu(k); |
| } |
| } |
| |
| static uint16_t read_u16(struct mem_source *mem, size_t offset) |
| { |
| if (offset > mem->size - 2) { |
| invalid_source(mem, "Invalid offset"); |
| return 0; |
| } else { |
| be16 k; |
| memcpy(&k, mem->buf + offset, sizeof(k)); |
| return be16_to_cpu(k); |
| } |
| } |
| |
| static uint8_t read_u8(struct mem_source *mem, size_t offset) |
| { |
| if (offset > mem->size - 1) { |
| invalid_source(mem, "Invalid offset"); |
| return 0; |
| } else { |
| return *(uint8_t*)(mem->buf + offset); |
| } |
| } |
| |
| static s15Fixed16Number read_s15Fixed16Number(struct mem_source *mem, size_t offset) |
| { |
| return read_u32(mem, offset); |
| } |
| |
| static uInt8Number read_uInt8Number(struct mem_source *mem, size_t offset) |
| { |
| return read_u8(mem, offset); |
| } |
| |
| static uInt16Number read_uInt16Number(struct mem_source *mem, size_t offset) |
| { |
| return read_u16(mem, offset); |
| } |
| |
| #define BAD_VALUE_PROFILE NULL |
| #define INVALID_PROFILE NULL |
| #define NO_MEM_PROFILE NULL |
| |
| /* An arbitrary 4MB limit on profile size */ |
| #define MAX_PROFILE_SIZE 1024*1024*4 |
| #define MAX_TAG_COUNT 1024 |
| |
| static void check_CMM_type_signature(struct mem_source *src) |
| { |
| //uint32_t CMM_type_signature = read_u32(src, 4); |
| } |
| |
| static void read_profile_version(qcms_profile *profile, struct mem_source *src) |
| { |
| uint8_t major_revision = read_u8(src, 8 + 0); |
| uint8_t minor_revision = read_u8(src, 8 + 1); |
| uint8_t reserved_byte1 = read_u8(src, 8 + 2); |
| uint8_t reserved_byte2 = read_u8(src, 8 + 3); |
| |
| profile->icc_version = major_revision << 8 | minor_revision; |
| |
| if (reserved_byte1 || reserved_byte2) { |
| invalid_source(src, "Invalid reserved bytes"); |
| return; |
| } |
| |
| if (major_revision == 2) |
| return; // ICC V2.X color profile |
| if (major_revision == 4 && qcms_supports_iccv4) |
| return; // ICC V4.X color profile |
| |
| /* Checking the version doesn't buy us anything: permit any |
| version without failure for now */ |
| // invalid_source(src, "Unsupported ICC revision"); |
| return; |
| } |
| |
| #define INPUT_DEVICE_PROFILE 0x73636e72 // 'scnr' |
| #define DISPLAY_DEVICE_PROFILE 0x6d6e7472 // 'mntr' |
| #define OUTPUT_DEVICE_PROFILE 0x70727472 // 'prtr' |
| #define DEVICE_LINK_PROFILE 0x6c696e6b // 'link' |
| #define COLOR_SPACE_PROFILE 0x73706163 // 'spac' |
| #define ABSTRACT_PROFILE 0x61627374 // 'abst' |
| #define NAMED_COLOR_PROFILE 0x6e6d636c // 'nmcl' |
| |
| static void read_class_signature(qcms_profile *profile, struct mem_source *mem) |
| { |
| profile->class = read_u32(mem, 12); |
| switch (profile->class) { |
| case DISPLAY_DEVICE_PROFILE: |
| case INPUT_DEVICE_PROFILE: |
| case OUTPUT_DEVICE_PROFILE: |
| case COLOR_SPACE_PROFILE: |
| break; |
| default: |
| invalid_source(mem, "Invalid Profile/Device Class signature"); |
| } |
| } |
| |
| static void read_color_space(qcms_profile *profile, struct mem_source *mem) |
| { |
| profile->color_space = read_u32(mem, 16); |
| switch (profile->color_space) { |
| case RGB_SIGNATURE: |
| case GRAY_SIGNATURE: |
| break; |
| default: |
| invalid_source(mem, "Unsupported colorspace"); |
| } |
| } |
| |
| static void read_pcs(qcms_profile *profile, struct mem_source *mem) |
| { |
| profile->pcs = read_u32(mem, 20); |
| switch (profile->pcs) { |
| case XYZ_SIGNATURE: |
| case LAB_SIGNATURE: |
| break; |
| default: |
| invalid_source(mem, "Unsupported pcs"); |
| } |
| } |
| |
| struct tag { |
| uint32_t signature; |
| uint32_t offset; |
| uint32_t size; |
| }; |
| |
| struct tag_index { |
| uint32_t count; |
| struct tag *tags; |
| }; |
| |
| static struct tag_index read_tag_table(qcms_profile *profile, struct mem_source *mem) |
| { |
| struct tag_index index = {0, NULL}; |
| unsigned int i; |
| |
| index.count = read_u32(mem, 128); |
| if (index.count > MAX_TAG_COUNT) { |
| invalid_source(mem, "max number of tags exceeded"); |
| return index; |
| } |
| |
| index.tags = malloc(sizeof(struct tag)*index.count); |
| if (index.tags) { |
| for (i = 0; i < index.count; i++) { |
| index.tags[i].signature = read_u32(mem, 128 + 4 + 4*i*3); |
| index.tags[i].offset = read_u32(mem, 128 + 4 + 4*i*3 + 4); |
| index.tags[i].size = read_u32(mem, 128 + 4 + 4*i*3 + 8); |
| } |
| } |
| |
| return index; |
| } |
| |
| /* Checks a profile for obvious inconsistencies and return true if the |
| * profile looks bogus and should probably be ignored. |
| */ |
| qcms_bool qcms_profile_is_bogus(qcms_profile *profile) |
| { |
| float rX, rY, rZ, gX, gY, gZ, bX, bY, bZ; |
| float target[3], tolerance[3], sum[3]; |
| unsigned i; |
| |
| // We currently only check the bogosity of RGB profiles. |
| if (profile->color_space != RGB_SIGNATURE) |
| return false; |
| |
| if (qcms_supports_iccv4 && (profile->A2B0 || profile->B2A0)) |
| return false; |
| |
| rX = s15Fixed16Number_to_float(profile->redColorant.X); |
| rY = s15Fixed16Number_to_float(profile->redColorant.Y); |
| rZ = s15Fixed16Number_to_float(profile->redColorant.Z); |
| |
| gX = s15Fixed16Number_to_float(profile->greenColorant.X); |
| gY = s15Fixed16Number_to_float(profile->greenColorant.Y); |
| gZ = s15Fixed16Number_to_float(profile->greenColorant.Z); |
| |
| bX = s15Fixed16Number_to_float(profile->blueColorant.X); |
| bY = s15Fixed16Number_to_float(profile->blueColorant.Y); |
| bZ = s15Fixed16Number_to_float(profile->blueColorant.Z); |
| |
| // Build our target vector: CIE D50 white. See also mozilla bug 460629, |
| // and http://www.color.org/whyd50.xalter "Why is the media white point |
| // of a display profile always D50?" |
| |
| target[0] = (float) 0.96420; |
| target[1] = (float) 1.00000; |
| target[2] = (float) 0.82491; |
| |
| // Our tolerance vector - Recommended by Chris Murphy [1] based on |
| // conversion from the L*a*b space criterion of no more than 3 in any |
| // one channel. This is similar to, but slightly more tolerant than |
| // Adobe's criterion. [1] https://bugzil.la/460629#c10 |
| |
| tolerance[0] = (float) 0.02; |
| tolerance[1] = (float) 0.02; |
| tolerance[2] = (float) 0.04; |
| |
| // Sum the XYZ values: they should add to D50 white, within tolerance. |
| |
| // FIXME: this test assumes the TRC RGB curves equal 1.0 for the white |
| // input (255,255,255) RGB test color. For user display profiles, that |
| // is the normal case. Profiles with abnormal TRC exist. A better test |
| // would transform 255,255,255 white through the profile to either XYZ |
| // or L*a*b color and compare the result to D50 in XYZ or L*a*b color. |
| |
| sum[0] = rX + gX + bX; |
| sum[1] = rY + gY + bY; |
| sum[2] = rZ + gZ + bZ; |
| |
| for (i = 0; i < 3; ++i) { |
| if (!(((sum[i] - tolerance[i]) <= target[i]) && |
| ((sum[i] + tolerance[i]) >= target[i]))) { |
| return true; // out of tolerance: bogus |
| } |
| } |
| |
| #ifndef __APPLE__ |
| // Check if any of the XYZ values are negative (see mozilla bug 498245) |
| // CIEXYZ tristimulus values cannot be negative according to the spec. |
| |
| bool negative = |
| (rX < 0) || (rY < 0) || (rZ < 0) || |
| (gX < 0) || (gY < 0) || (gZ < 0) || |
| (bX < 0) || (bY < 0) || (bZ < 0); |
| |
| if (negative) |
| return true; // bogus |
| #else |
| // Chromatic adaption to D50 can result in negative XYZ, but the white |
| // point D50 tolerance test has passed. Accept negative values herein. |
| // See https://bugzilla.mozilla.org/show_bug.cgi?id=498245#c18 onwards |
| // for discussion about whether profile XYZ can or cannot be negative, |
| // per the spec. Also the https://bugzil.la/450923 user report. |
| |
| // FIXME: allow this relaxation on all ports? |
| #endif |
| // All good. |
| return false; |
| } |
| |
| qcms_bool qcms_profile_has_white_point(qcms_profile *profile) |
| { |
| struct XYZNumber wp = profile->mediaWhitePoint; |
| |
| return (wp.X != 0) && (wp.Y != 0) && (wp.Z != 0); |
| } |
| |
| qcms_xyz_float qcms_profile_get_white_point(qcms_profile *profile) |
| { |
| qcms_xyz_float wp = { 0.0f, 0.0f, 0.0f }; |
| |
| if (qcms_profile_has_white_point(profile)) { |
| wp.X = s15Fixed16Number_to_float(profile->mediaWhitePoint.X); |
| wp.Y = s15Fixed16Number_to_float(profile->mediaWhitePoint.Y); |
| wp.Z = s15Fixed16Number_to_float(profile->mediaWhitePoint.Z); |
| } |
| |
| return wp; |
| } |
| |
| #define TAG_bXYZ 0x6258595a |
| #define TAG_gXYZ 0x6758595a |
| #define TAG_rXYZ 0x7258595a |
| #define TAG_rTRC 0x72545243 |
| #define TAG_bTRC 0x62545243 |
| #define TAG_gTRC 0x67545243 |
| #define TAG_kTRC 0x6b545243 |
| #define TAG_A2B0 0x41324230 |
| #define TAG_B2A0 0x42324130 |
| #define TAG_CHAD 0x63686164 |
| #define TAG_desc 0x64657363 |
| #define TAG_vcgt 0x76636774 |
| #define TAG_wtpt 0x77747074 |
| |
| static struct tag *find_tag(struct tag_index index, uint32_t tag_id) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < index.count; i++) { |
| if (index.tags[i].signature == tag_id) |
| return &index.tags[i]; |
| } |
| |
| return NULL; |
| } |
| |
| #define DESC_TYPE 0x64657363 // 'desc' |
| #define MLUC_TYPE 0x6d6c7563 // 'mluc' |
| #define MMOD_TYPE 0x6D6D6F64 // 'mmod' |
| #define VCGT_TYPE 0x76636774 // 'vcgt' |
| |
| enum { |
| VCGT_TYPE_TABLE, |
| VCGT_TYPE_FORMULA, |
| VCGT_TYPE_LAST = VCGT_TYPE_FORMULA |
| }; |
| |
| static qcms_bool read_tag_vcgtType(qcms_profile *profile, struct mem_source *src, struct tag_index index) |
| { |
| size_t tag_offset = find_tag(index, TAG_vcgt)->offset; |
| uint32_t tag_type = read_u32(src, tag_offset); |
| uint32_t vcgt_type = read_u32(src, tag_offset + 8); |
| |
| if (!src->valid || tag_type != VCGT_TYPE) |
| goto invalid_vcgt_tag; |
| |
| // Only support table and equation types. |
| if (vcgt_type > VCGT_TYPE_LAST) |
| return true; |
| |
| if (vcgt_type == VCGT_TYPE_TABLE) { |
| uint16_t channels = read_u16(src, tag_offset + 12); |
| uint16_t elements = read_u16(src, tag_offset + 14); |
| uint16_t byte_depth = read_u16(src, tag_offset + 16); |
| size_t table_offset = tag_offset + 18; |
| uint32_t i; |
| uint16_t *dest; |
| |
| if (!src->valid) |
| goto invalid_vcgt_tag; |
| |
| // Only support 3 channels. |
| if (channels != 3) |
| return true; |
| // Only support single or double byte values. |
| if (byte_depth != 1 && byte_depth != 2) |
| return true; |
| // Limit the table to a sensible size; 10-bit gamma is a reasonable |
| // maximum for hardware correction. |
| if (elements > 1024) |
| return true; |
| |
| // Empty table is invalid. |
| if (!elements) |
| goto invalid_vcgt_tag; |
| |
| profile->vcgt.length = elements; |
| profile->vcgt.data = malloc(3 * elements * sizeof(uint16_t)); |
| if (!profile->vcgt.data) |
| return false; |
| |
| dest = profile->vcgt.data; |
| |
| for (i = 0; i < 3 * elements; ++i) { |
| if (byte_depth == 1) { |
| *dest++ = read_u8(src, table_offset) * 256; |
| } else { |
| *dest++ = read_u16(src, table_offset); |
| } |
| |
| table_offset += byte_depth; |
| |
| if (!src->valid) |
| goto invalid_vcgt_tag; |
| } |
| } else { |
| size_t formula_offset = tag_offset + 12; |
| int i, j; |
| uint16_t *dest; |
| |
| // For formula always provide an 8-bit lut. |
| profile->vcgt.length = 256; |
| profile->vcgt.data = malloc(3 * profile->vcgt.length * sizeof(uint16_t)); |
| if (!profile->vcgt.data) |
| return false; |
| |
| dest = profile->vcgt.data; |
| for (i = 0; i < 3; ++i) { |
| float gamma = s15Fixed16Number_to_float( |
| read_s15Fixed16Number(src, formula_offset + 12 * i)); |
| float min = s15Fixed16Number_to_float( |
| read_s15Fixed16Number(src, formula_offset + 4 + 12 * i)); |
| float max = s15Fixed16Number_to_float( |
| read_s15Fixed16Number(src, formula_offset + 8 + 12 * i)); |
| float range = max - min; |
| |
| if (!src->valid) |
| goto invalid_vcgt_tag; |
| |
| for (j = 0; j < profile->vcgt.length; ++j) { |
| *dest++ = 65535.f * |
| (min + range * pow((float)j / (profile->vcgt.length - 1), gamma)); |
| } |
| } |
| } |
| |
| return true; |
| |
| invalid_vcgt_tag: |
| invalid_source(src, "invalid vcgt tag"); |
| return false; |
| } |
| |
| static bool read_tag_descType(qcms_profile *profile, struct mem_source *src, struct tag_index index, uint32_t tag_id) |
| { |
| struct tag *tag = find_tag(index, tag_id); |
| if (tag) { |
| const uint32_t limit = sizeof profile->description; |
| uint32_t offset = tag->offset; |
| uint32_t type = read_u32(src, offset); |
| uint32_t length = read_u32(src, offset+8); |
| uint32_t i, description_offset; |
| bool mluc = false; |
| if (length && type == MLUC_TYPE) { |
| length = read_u32(src, offset+20); |
| if (!length || (length & 1) || (read_u32(src, offset+12) != 12)) |
| goto invalid_desc_tag; |
| description_offset = offset + read_u32(src, offset+24); |
| if (!src->valid) |
| goto invalid_desc_tag; |
| mluc = true; |
| } else if (length && type == DESC_TYPE) { |
| description_offset = offset + 12; |
| } else { |
| goto invalid_desc_tag; |
| } |
| if (length >= limit) |
| length = limit - 1; |
| for (i = 0; i < length; ++i) { |
| uint8_t value = read_u8(src, description_offset + i); |
| if (!src->valid) |
| goto invalid_desc_tag; |
| if (mluc && !value) |
| value = '.'; |
| profile->description[i] = value; |
| } |
| profile->description[length] = 0; |
| } else { |
| goto invalid_desc_tag; |
| } |
| |
| if (src->valid) |
| return true; |
| |
| invalid_desc_tag: |
| invalid_source(src, "invalid description"); |
| return false; |
| } |
| |
| #if defined(__APPLE__) |
| |
| // Use the dscm tag to change profile description "Display" to its more specific en-localized monitor name, if any. |
| |
| #define TAG_dscm 0x6473636D // 'dscm' |
| |
| static bool read_tag_dscmType(qcms_profile *profile, struct mem_source *src, struct tag_index index, uint32_t tag_id) |
| { |
| if (strcmp(profile->description, "Display") != 0) |
| return true; |
| |
| struct tag *tag = find_tag(index, tag_id); |
| if (tag) { |
| uint32_t offset = tag->offset; |
| uint32_t type = read_u32(src, offset); |
| uint32_t records = read_u32(src, offset+8); |
| |
| if (!src->valid || !records || type != MLUC_TYPE) |
| goto invalid_dscm_tag; |
| if (read_u32(src, offset+12) != 12) // MLUC record size: bytes |
| goto invalid_dscm_tag; |
| |
| for (uint32_t i = 0; i < records; ++i) { |
| const uint32_t limit = sizeof profile->description; |
| const uint16_t isoen = 0x656E; // ISO-3166-1 language 'en' |
| |
| uint16_t language = read_u16(src, offset + 16 + (i * 12) + 0); |
| uint32_t length = read_u32(src, offset + 16 + (i * 12) + 4); |
| uint32_t description_offset = read_u32(src, offset + 16 + (i * 12) + 8); |
| |
| if (!src->valid || !length || (length & 1)) |
| goto invalid_dscm_tag; |
| if (language != isoen) |
| continue; |
| |
| // Use a prefix to identify the display description source |
| strcpy(profile->description, "dscm:"); |
| length += 5; |
| |
| if (length >= limit) |
| length = limit - 1; |
| for (uint32_t j = 5; j < length; ++j) { |
| uint8_t value = read_u8(src, offset + description_offset + j - 5); |
| if (!src->valid) |
| goto invalid_dscm_tag; |
| profile->description[j] = value ? value : '.'; |
| } |
| profile->description[length] = 0; |
| break; |
| } |
| } |
| |
| if (src->valid) |
| return true; |
| |
| invalid_dscm_tag: |
| invalid_source(src, "invalid dscm tag"); |
| return false; |
| } |
| |
| // Use the mmod tag to change profile description "Display" to its specific mmod maker model data, if any. |
| |
| #define TAG_mmod 0x6D6D6F64 // 'mmod' |
| |
| static bool read_tag_mmodType(qcms_profile *profile, struct mem_source *src, struct tag_index index, uint32_t tag_id) |
| { |
| if (strcmp(profile->description, "Display") != 0) |
| return true; |
| |
| struct tag *tag = find_tag(index, tag_id); |
| if (tag) { |
| const uint8_t length = 4 * 4; // Four 4-byte fields: 'mmod', 0, maker, model. |
| |
| uint32_t offset = tag->offset; |
| if (tag->size < 40 || read_u32(src, offset) != MMOD_TYPE) |
| goto invalid_mmod_tag; |
| |
| for (uint8_t i = 0; i < length; ++i) { |
| uint8_t value = read_u8(src, offset + i); |
| if (!src->valid) |
| goto invalid_mmod_tag; |
| profile->description[i] = value ? value : '.'; |
| } |
| profile->description[length] = 0; |
| } |
| |
| if (src->valid) |
| return true; |
| |
| invalid_mmod_tag: |
| invalid_source(src, "invalid mmod tag"); |
| return false; |
| } |
| |
| #endif // __APPLE__ |
| |
| #define XYZ_TYPE 0x58595a20 // 'XYZ ' |
| #define CURVE_TYPE 0x63757276 // 'curv' |
| #define PARAMETRIC_CURVE_TYPE 0x70617261 // 'para' |
| #define LUT16_TYPE 0x6d667432 // 'mft2' |
| #define LUT8_TYPE 0x6d667431 // 'mft1' |
| #define LUT_MAB_TYPE 0x6d414220 // 'mAB ' |
| #define LUT_MBA_TYPE 0x6d424120 // 'mBA ' |
| #define CHROMATIC_TYPE 0x73663332 // 'sf32' |
| |
| static struct matrix read_tag_s15Fixed16ArrayType(struct mem_source *src, struct tag_index index, uint32_t tag_id) |
| { |
| struct tag *tag = find_tag(index, tag_id); |
| struct matrix matrix; |
| if (tag) { |
| uint8_t i; |
| uint32_t offset = tag->offset; |
| uint32_t type = read_u32(src, offset); |
| |
| // Check mandatory type signature for s16Fixed16ArrayType |
| if (type != CHROMATIC_TYPE) { |
| invalid_source(src, "unexpected type, expected 'sf32'"); |
| } |
| |
| for (i = 0; i < 9; i++) { |
| matrix.m[i/3][i%3] = s15Fixed16Number_to_float(read_s15Fixed16Number(src, offset+8+i*4)); |
| } |
| matrix.invalid = false; |
| } else { |
| matrix.invalid = true; |
| invalid_source(src, "missing sf32tag"); |
| } |
| return matrix; |
| } |
| |
| static struct XYZNumber read_tag_XYZType(struct mem_source *src, struct tag_index index, uint32_t tag_id) |
| { |
| struct XYZNumber num = {0, 0, 0}; |
| struct tag *tag = find_tag(index, tag_id); |
| if (tag) { |
| uint32_t offset = tag->offset; |
| |
| uint32_t type = read_u32(src, offset); |
| if (type != XYZ_TYPE) |
| invalid_source(src, "unexpected type, expected XYZ"); |
| num.X = read_s15Fixed16Number(src, offset+8); |
| num.Y = read_s15Fixed16Number(src, offset+12); |
| num.Z = read_s15Fixed16Number(src, offset+16); |
| } else { |
| invalid_source(src, "missing xyztag"); |
| } |
| return num; |
| } |
| |
| // Read the tag at a given offset rather then the tag_index. |
| // This method is used when reading mAB tags where nested curveType are |
| // present that are not part of the tag_index. |
| static struct curveType *read_curveType(struct mem_source *src, uint32_t offset, uint32_t *len) |
| { |
| static const uint32_t COUNT_TO_LENGTH[5] = {1, 3, 4, 5, 7}; |
| struct curveType *curve = NULL; |
| uint32_t type = read_u32(src, offset); |
| uint32_t count; |
| int i; |
| |
| if (type != CURVE_TYPE && type != PARAMETRIC_CURVE_TYPE) { |
| invalid_source(src, "unexpected type, expected CURV or PARA"); |
| return NULL; |
| } |
| |
| if (type == CURVE_TYPE) { |
| count = read_u32(src, offset+8); |
| |
| #define MAX_CURVE_ENTRIES 40000 //arbitrary |
| if (count > MAX_CURVE_ENTRIES) { |
| invalid_source(src, "curve size too large"); |
| return NULL; |
| } |
| curve = malloc(sizeof(struct curveType) + sizeof(uInt16Number)*count); |
| if (!curve) |
| return NULL; |
| |
| curve->count = count; |
| curve->type = type; |
| |
| for (i=0; i<count; i++) { |
| curve->data[i] = read_u16(src, offset + 12 + i*2); |
| } |
| *len = 12 + count * 2; |
| } else { //PARAMETRIC_CURVE_TYPE |
| count = read_u16(src, offset+8); |
| |
| if (count > 4) { |
| invalid_source(src, "parametric function type not supported."); |
| return NULL; |
| } |
| |
| curve = malloc(sizeof(struct curveType)); |
| if (!curve) |
| return NULL; |
| |
| curve->count = count; |
| curve->type = type; |
| |
| for (i=0; i < COUNT_TO_LENGTH[count]; i++) { |
| curve->parameter[i] = s15Fixed16Number_to_float(read_s15Fixed16Number(src, offset + 12 + i*4)); |
| } |
| *len = 12 + COUNT_TO_LENGTH[count] * 4; |
| |
| if ((count == 1 || count == 2)) { |
| /* we have a type 1 or type 2 function that has a division by 'a' */ |
| float a = curve->parameter[1]; |
| if (a == 0.f) |
| invalid_source(src, "parametricCurve definition causes division by zero."); |
| } |
| } |
| |
| return curve; |
| } |
| |
| static struct curveType *read_tag_curveType(struct mem_source *src, struct tag_index index, uint32_t tag_id) |
| { |
| struct tag *tag = find_tag(index, tag_id); |
| struct curveType *curve = NULL; |
| if (tag) { |
| uint32_t len; |
| return read_curveType(src, tag->offset, &len); |
| } else { |
| invalid_source(src, "missing curvetag"); |
| } |
| |
| return curve; |
| } |
| |
| #define MAX_CLUT_SIZE 500000 // arbitrary |
| #define MAX_CHANNELS 10 // arbitrary |
| static void read_nested_curveType(struct mem_source *src, struct curveType *(*curveArray)[MAX_CHANNELS], uint8_t num_channels, uint32_t curve_offset) |
| { |
| uint32_t channel_offset = 0; |
| int i; |
| for (i = 0; i < num_channels; i++) { |
| uint32_t tag_len = ~0; |
| |
| (*curveArray)[i] = read_curveType(src, curve_offset + channel_offset, &tag_len); |
| if (!(*curveArray)[i]) { |
| invalid_source(src, "invalid nested curveType curve"); |
| } |
| |
| if (tag_len == ~0) { |
| invalid_source(src, "invalid nested curveType tag length"); |
| return; |
| } |
| |
| channel_offset += tag_len; |
| // 4 byte aligned |
| if ((tag_len % 4) != 0) |
| channel_offset += 4 - (tag_len % 4); |
| } |
| } |
| |
| static void mAB_release(struct lutmABType *lut) |
| { |
| uint8_t i; |
| |
| for (i = 0; i < lut->num_in_channels; i++){ |
| free(lut->a_curves[i]); |
| } |
| for (i = 0; i < lut->num_out_channels; i++){ |
| free(lut->b_curves[i]); |
| free(lut->m_curves[i]); |
| } |
| free(lut); |
| } |
| |
| /* See section 10.10 for specs */ |
| static struct lutmABType *read_tag_lutmABType(struct mem_source *src, struct tag_index index, uint32_t tag_id) |
| { |
| struct tag *tag = find_tag(index, tag_id); |
| uint32_t offset = tag->offset; |
| uint32_t a_curve_offset, b_curve_offset, m_curve_offset; |
| uint32_t matrix_offset; |
| uint32_t clut_offset; |
| uint32_t clut_size = 1; |
| uint8_t clut_precision; |
| uint32_t type = read_u32(src, offset); |
| uint8_t num_in_channels, num_out_channels; |
| struct lutmABType *lut; |
| int i; |
| |
| if (type != LUT_MAB_TYPE && type != LUT_MBA_TYPE) { |
| return NULL; |
| } |
| |
| num_in_channels = read_u8(src, offset + 8); |
| num_out_channels = read_u8(src, offset + 8); |
| if (num_in_channels > MAX_CHANNELS || num_out_channels > MAX_CHANNELS) |
| return NULL; |
| |
| // We require 3in/out channels since we only support RGB->XYZ (or RGB->LAB) |
| // XXX: If we remove this restriction make sure that the number of channels |
| // is less or equal to the maximum number of mAB curves in qcmsint.h |
| // also check for clut_size overflow. Also make sure it's != 0 |
| if (num_in_channels != 3 || num_out_channels != 3) |
| return NULL; |
| |
| // some of this data is optional and is denoted by a zero offset |
| // we also use this to track their existance |
| a_curve_offset = read_u32(src, offset + 28); |
| clut_offset = read_u32(src, offset + 24); |
| m_curve_offset = read_u32(src, offset + 20); |
| matrix_offset = read_u32(src, offset + 16); |
| b_curve_offset = read_u32(src, offset + 12); |
| |
| // Convert offsets relative to the tag to relative to the profile |
| // preserve zero for optional fields |
| if (a_curve_offset) |
| a_curve_offset += offset; |
| if (clut_offset) |
| clut_offset += offset; |
| if (m_curve_offset) |
| m_curve_offset += offset; |
| if (matrix_offset) |
| matrix_offset += offset; |
| if (b_curve_offset) |
| b_curve_offset += offset; |
| |
| if (clut_offset) { |
| assert (num_in_channels == 3); |
| // clut_size can not overflow since lg(256^num_in_channels) = 24 bits. |
| for (i = 0; i < num_in_channels; i++) { |
| clut_size *= read_u8(src, clut_offset + i); |
| if (clut_size == 0) { |
| invalid_source(src, "bad clut_size"); |
| } |
| } |
| } else { |
| clut_size = 0; |
| } |
| |
| // 24bits * 3 won't overflow either |
| clut_size = clut_size * num_out_channels; |
| |
| if (clut_size > MAX_CLUT_SIZE) |
| return NULL; |
| |
| lut = malloc(sizeof(struct lutmABType) + (clut_size) * sizeof(float)); |
| if (!lut) |
| return NULL; |
| // we'll fill in the rest below |
| memset(lut, 0, sizeof(struct lutmABType)); |
| lut->clut_table = &lut->clut_table_data[0]; |
| |
| if (clut_offset) { |
| for (i = 0; i < num_in_channels; i++) { |
| lut->num_grid_points[i] = read_u8(src, clut_offset + i); |
| if (lut->num_grid_points[i] == 0) { |
| invalid_source(src, "bad grid_points"); |
| } |
| } |
| } |
| |
| // Reverse the processing of transformation elements for mBA type. |
| lut->reversed = (type == LUT_MBA_TYPE); |
| |
| lut->num_in_channels = num_in_channels; |
| lut->num_out_channels = num_out_channels; |
| |
| if (matrix_offset) { |
| // read the matrix if we have it |
| lut->e00 = read_s15Fixed16Number(src, matrix_offset+4*0); |
| lut->e01 = read_s15Fixed16Number(src, matrix_offset+4*1); |
| lut->e02 = read_s15Fixed16Number(src, matrix_offset+4*2); |
| lut->e10 = read_s15Fixed16Number(src, matrix_offset+4*3); |
| lut->e11 = read_s15Fixed16Number(src, matrix_offset+4*4); |
| lut->e12 = read_s15Fixed16Number(src, matrix_offset+4*5); |
| lut->e20 = read_s15Fixed16Number(src, matrix_offset+4*6); |
| lut->e21 = read_s15Fixed16Number(src, matrix_offset+4*7); |
| lut->e22 = read_s15Fixed16Number(src, matrix_offset+4*8); |
| lut->e03 = read_s15Fixed16Number(src, matrix_offset+4*9); |
| lut->e13 = read_s15Fixed16Number(src, matrix_offset+4*10); |
| lut->e23 = read_s15Fixed16Number(src, matrix_offset+4*11); |
| } |
| |
| if (a_curve_offset) { |
| read_nested_curveType(src, &lut->a_curves, num_in_channels, a_curve_offset); |
| } |
| if (m_curve_offset) { |
| read_nested_curveType(src, &lut->m_curves, num_out_channels, m_curve_offset); |
| } |
| if (b_curve_offset) { |
| read_nested_curveType(src, &lut->b_curves, num_out_channels, b_curve_offset); |
| } else { |
| invalid_source(src, "B curves required"); |
| } |
| |
| if (clut_offset) { |
| clut_precision = read_u8(src, clut_offset + 16); |
| if (clut_precision == 1) { |
| for (i = 0; i < clut_size; i++) { |
| lut->clut_table[i] = uInt8Number_to_float(read_uInt8Number(src, clut_offset + 20 + i*1)); |
| } |
| } else if (clut_precision == 2) { |
| for (i = 0; i < clut_size; i++) { |
| lut->clut_table[i] = uInt16Number_to_float(read_uInt16Number(src, clut_offset + 20 + i*2)); |
| } |
| } else { |
| invalid_source(src, "Invalid clut precision"); |
| } |
| } |
| |
| if (!src->valid) { |
| mAB_release(lut); |
| return NULL; |
| } |
| |
| return lut; |
| } |
| |
| static struct lutType *read_tag_lutType(struct mem_source *src, struct tag_index index, uint32_t tag_id) |
| { |
| struct tag *tag = find_tag(index, tag_id); |
| uint32_t offset = tag->offset; |
| uint32_t type = read_u32(src, offset); |
| uint16_t num_input_table_entries; |
| uint16_t num_output_table_entries; |
| uint8_t in_chan, grid_points, out_chan; |
| size_t clut_offset, output_offset; |
| uint32_t clut_size; |
| size_t entry_size; |
| struct lutType *lut; |
| int i; |
| |
| /* I'm not sure why the spec specifies a fixed number of entries for LUT8 tables even though |
| * they have room for the num_entries fields */ |
| if (type == LUT8_TYPE) { |
| num_input_table_entries = 256; |
| num_output_table_entries = 256; |
| entry_size = 1; |
| } else if (type == LUT16_TYPE) { |
| num_input_table_entries = read_u16(src, offset + 48); |
| num_output_table_entries = read_u16(src, offset + 50); |
| if (num_input_table_entries == 0 || num_output_table_entries == 0) { |
| invalid_source(src, "Bad channel count"); |
| return NULL; |
| } |
| entry_size = 2; |
| } else { |
| assert(0); // the caller checks that this doesn't happen |
| invalid_source(src, "Unexpected lut type"); |
| return NULL; |
| } |
| |
| in_chan = read_u8(src, offset + 8); |
| out_chan = read_u8(src, offset + 9); |
| grid_points = read_u8(src, offset + 10); |
| |
| clut_size = pow(grid_points, in_chan); |
| if (clut_size > MAX_CLUT_SIZE) { |
| invalid_source(src, "CLUT too large"); |
| return NULL; |
| } |
| |
| if (clut_size <= 0) { |
| invalid_source(src, "CLUT must not be empty."); |
| return NULL; |
| } |
| |
| if (in_chan != 3 || out_chan != 3) { |
| invalid_source(src, "CLUT only supports RGB"); |
| return NULL; |
| } |
| |
| lut = malloc(sizeof(struct lutType) + (num_input_table_entries * in_chan + clut_size*out_chan + num_output_table_entries * out_chan)*sizeof(float)); |
| if (!lut) { |
| invalid_source(src, "CLUT too large"); |
| return NULL; |
| } |
| |
| /* compute the offsets of tables */ |
| lut->input_table = &lut->table_data[0]; |
| lut->clut_table = &lut->table_data[in_chan*num_input_table_entries]; |
| lut->output_table = &lut->table_data[in_chan*num_input_table_entries + clut_size*out_chan]; |
| |
| lut->num_input_table_entries = num_input_table_entries; |
| lut->num_output_table_entries = num_output_table_entries; |
| lut->num_input_channels = in_chan; |
| lut->num_output_channels = out_chan; |
| lut->num_clut_grid_points = grid_points; |
| lut->e00 = read_s15Fixed16Number(src, offset+12); |
| lut->e01 = read_s15Fixed16Number(src, offset+16); |
| lut->e02 = read_s15Fixed16Number(src, offset+20); |
| lut->e10 = read_s15Fixed16Number(src, offset+24); |
| lut->e11 = read_s15Fixed16Number(src, offset+28); |
| lut->e12 = read_s15Fixed16Number(src, offset+32); |
| lut->e20 = read_s15Fixed16Number(src, offset+36); |
| lut->e21 = read_s15Fixed16Number(src, offset+40); |
| lut->e22 = read_s15Fixed16Number(src, offset+44); |
| |
| for (i = 0; i < lut->num_input_table_entries * in_chan; i++) { |
| if (type == LUT8_TYPE) { |
| lut->input_table[i] = uInt8Number_to_float(read_uInt8Number(src, offset + 52 + i * entry_size)); |
| } else { |
| lut->input_table[i] = uInt16Number_to_float(read_uInt16Number(src, offset + 52 + i * entry_size)); |
| } |
| } |
| |
| clut_offset = offset + 52 + lut->num_input_table_entries * in_chan * entry_size; |
| for (i = 0; i < clut_size * out_chan; i+=3) { |
| if (type == LUT8_TYPE) { |
| lut->clut_table[i+0] = uInt8Number_to_float(read_uInt8Number(src, clut_offset + i*entry_size + 0)); |
| lut->clut_table[i+1] = uInt8Number_to_float(read_uInt8Number(src, clut_offset + i*entry_size + 1)); |
| lut->clut_table[i+2] = uInt8Number_to_float(read_uInt8Number(src, clut_offset + i*entry_size + 2)); |
| } else { |
| lut->clut_table[i+0] = uInt16Number_to_float(read_uInt16Number(src, clut_offset + i*entry_size + 0)); |
| lut->clut_table[i+1] = uInt16Number_to_float(read_uInt16Number(src, clut_offset + i*entry_size + 2)); |
| lut->clut_table[i+2] = uInt16Number_to_float(read_uInt16Number(src, clut_offset + i*entry_size + 4)); |
| } |
| } |
| |
| output_offset = clut_offset + clut_size * out_chan * entry_size; |
| for (i = 0; i < lut->num_output_table_entries * out_chan; i++) { |
| if (type == LUT8_TYPE) { |
| lut->output_table[i] = uInt8Number_to_float(read_uInt8Number(src, output_offset + i*entry_size)); |
| } else { |
| lut->output_table[i] = uInt16Number_to_float(read_uInt16Number(src, output_offset + i*entry_size)); |
| } |
| } |
| |
| return lut; |
| } |
| |
| static void read_rendering_intent(qcms_profile *profile, struct mem_source *src) |
| { |
| profile->rendering_intent = read_u32(src, 64); |
| switch (profile->rendering_intent) { |
| case QCMS_INTENT_PERCEPTUAL: |
| case QCMS_INTENT_SATURATION: |
| case QCMS_INTENT_RELATIVE_COLORIMETRIC: |
| case QCMS_INTENT_ABSOLUTE_COLORIMETRIC: |
| break; |
| default: |
| invalid_source(src, "unknown rendering intent"); |
| } |
| } |
| |
| qcms_profile *qcms_profile_create(void) |
| { |
| return calloc(sizeof(qcms_profile), 1); |
| } |
| |
| |
| |
| /* build sRGB gamma table */ |
| /* based on cmsBuildParametricGamma() */ |
| static uint16_t *build_sRGB_gamma_table(int num_entries) |
| { |
| int i; |
| /* taken from lcms: Build_sRGBGamma() */ |
| double gamma = 2.4; |
| double a = 1./1.055; |
| double b = 0.055/1.055; |
| double c = 1./12.92; |
| double d = 0.04045; |
| |
| uint16_t *table = malloc(sizeof(uint16_t) * num_entries); |
| if (!table) |
| return NULL; |
| |
| for (i=0; i<num_entries; i++) { |
| double x = (double)i / (num_entries-1); |
| double y, output; |
| // IEC 61966-2.1 (sRGB) |
| // Y = (aX + b)^Gamma | X >= d |
| // Y = cX | X < d |
| if (x >= d) { |
| double e = (a*x + b); |
| if (e > 0) |
| y = pow(e, gamma); |
| else |
| y = 0; |
| } else { |
| y = c*x; |
| } |
| |
| // Saturate -- this could likely move to a separate function |
| output = y * 65535. + .5; |
| if (output > 65535.) |
| output = 65535; |
| if (output < 0) |
| output = 0; |
| table[i] = (uint16_t)floor(output); |
| } |
| return table; |
| } |
| |
| static struct curveType *curve_from_table(uint16_t *table, int num_entries) |
| { |
| struct curveType *curve; |
| int i; |
| curve = malloc(sizeof(struct curveType) + sizeof(uInt16Number)*num_entries); |
| if (!curve) |
| return NULL; |
| curve->type = CURVE_TYPE; |
| curve->count = num_entries; |
| for (i = 0; i < num_entries; i++) { |
| curve->data[i] = table[i]; |
| } |
| return curve; |
| } |
| |
| static uint16_t float_to_u8Fixed8Number(float a) |
| { |
| if (a > (255.f + 255.f/256)) |
| return 0xffff; |
| else if (a < 0.f) |
| return 0; |
| else |
| return floor(a*256.f + .5f); |
| } |
| |
| static struct curveType *curve_from_gamma(float gamma) |
| { |
| struct curveType *curve; |
| int num_entries = 1; |
| curve = malloc(sizeof(struct curveType) + sizeof(uInt16Number)*num_entries); |
| if (!curve) |
| return NULL; |
| curve->count = num_entries; |
| curve->data[0] = float_to_u8Fixed8Number(gamma); |
| return curve; |
| } |
| |
| |
| //XXX: it would be nice if we had a way of ensuring |
| // everything in a profile was initialized regardless of how it was created |
| |
| //XXX: should this also be taking a black_point? |
| /* similar to CGColorSpaceCreateCalibratedRGB */ |
| qcms_profile* qcms_profile_create_rgb_with_gamma( |
| qcms_CIE_xyY white_point, |
| qcms_CIE_xyYTRIPLE primaries, |
| float gamma) |
| { |
| qcms_profile* profile = qcms_profile_create(); |
| if (!profile) |
| return NO_MEM_PROFILE; |
| |
| if (!set_rgb_colorants(profile, white_point, primaries)) { |
| qcms_profile_release(profile); |
| return INVALID_PROFILE; |
| } |
| |
| profile->redTRC = curve_from_gamma(gamma); |
| profile->blueTRC = curve_from_gamma(gamma); |
| profile->greenTRC = curve_from_gamma(gamma); |
| |
| if (!profile->redTRC || !profile->blueTRC || !profile->greenTRC) { |
| qcms_profile_release(profile); |
| return NO_MEM_PROFILE; |
| } |
| |
| profile->class = DISPLAY_DEVICE_PROFILE; |
| profile->rendering_intent = QCMS_INTENT_PERCEPTUAL; |
| profile->color_space = RGB_SIGNATURE; |
| profile->pcs = XYZ_SIGNATURE; |
| return profile; |
| } |
| |
| qcms_profile* qcms_profile_create_rgb_with_table( |
| qcms_CIE_xyY white_point, |
| qcms_CIE_xyYTRIPLE primaries, |
| uint16_t *table, int num_entries) |
| { |
| qcms_profile* profile = qcms_profile_create(); |
| if (!profile) |
| return NO_MEM_PROFILE; |
| |
| if (!set_rgb_colorants(profile, white_point, primaries)) { |
| qcms_profile_release(profile); |
| return INVALID_PROFILE; |
| } |
| |
| profile->redTRC = curve_from_table(table, num_entries); |
| profile->blueTRC = curve_from_table(table, num_entries); |
| profile->greenTRC = curve_from_table(table, num_entries); |
| |
| if (!profile->redTRC || !profile->blueTRC || !profile->greenTRC) { |
| qcms_profile_release(profile); |
| return NO_MEM_PROFILE; |
| } |
| |
| profile->class = DISPLAY_DEVICE_PROFILE; |
| profile->rendering_intent = QCMS_INTENT_PERCEPTUAL; |
| profile->color_space = RGB_SIGNATURE; |
| profile->pcs = XYZ_SIGNATURE; |
| return profile; |
| } |
| |
| /* from lcms: cmsWhitePointFromTemp */ |
| /* tempK must be >= 4000. and <= 25000. |
| * Invalid values of tempK will return |
| * (x,y,Y) = (-1.0, -1.0, -1.0) |
| * similar to argyll: icx_DTEMP2XYZ() */ |
| qcms_CIE_xyY white_point_from_temp(int temp_K) |
| { |
| qcms_CIE_xyY white_point; |
| double x, y; |
| double T, T2, T3; |
| // double M1, M2; |
| |
| // No optimization provided. |
| T = temp_K; |
| T2 = T*T; // Square |
| T3 = T2*T; // Cube |
| |
| // For correlated color temperature (T) between 4000K and 7000K: |
| if (T >= 4000. && T <= 7000.) { |
| x = -4.6070*(1E9/T3) + 2.9678*(1E6/T2) + 0.09911*(1E3/T) + 0.244063; |
| } else { |
| // or for correlated color temperature (T) between 7000K and 25000K: |
| if (T > 7000.0 && T <= 25000.0) { |
| x = -2.0064*(1E9/T3) + 1.9018*(1E6/T2) + 0.24748*(1E3/T) + 0.237040; |
| } else { |
| // Invalid tempK |
| white_point.x = -1.0; |
| white_point.y = -1.0; |
| white_point.Y = -1.0; |
| |
| assert(0 && "invalid temp"); |
| |
| return white_point; |
| } |
| } |
| |
| // Obtain y(x) |
| |
| y = -3.000*(x*x) + 2.870*x - 0.275; |
| |
| // wave factors (not used, but here for futures extensions) |
| |
| // M1 = (-1.3515 - 1.7703*x + 5.9114 *y)/(0.0241 + 0.2562*x - 0.7341*y); |
| // M2 = (0.0300 - 31.4424*x + 30.0717*y)/(0.0241 + 0.2562*x - 0.7341*y); |
| |
| // Fill white_point struct |
| white_point.x = x; |
| white_point.y = y; |
| white_point.Y = 1.0; |
| |
| return white_point; |
| } |
| |
| qcms_profile* qcms_profile_sRGB(void) |
| { |
| qcms_profile *profile; |
| uint16_t *table; |
| |
| // Standard Illuminant D65 in XYZ coordinates, which is the standard |
| // sRGB IEC61966-2.1 / Rec.709 profile reference media white point. |
| struct XYZNumber D65 = { |
| 0xf351, 0x10000, 0x116cc // ( 0.950455, 1.000000, 1.089050 ) |
| }; |
| |
| // sRGB IEC61966-2.1 / Rec.709 color profile primaries, chromatically |
| // adapted (via Bradford procedures) to D50 white point. |
| // For details, refer to crbug/580917 |
| #if 0 |
| // lindbloom: ASTM E308-01 D50 White point. |
| s15Fixed16Number primaries[3][3] = { |
| { 0x06fa3, 0x06294, 0x024a1 }, // ( 0.436081, 0.385071, 0.143082 ) |
| { 0x038f6, 0x0b785, 0x00f85 }, // ( 0.222504, 0.716873, 0.060623 ) |
| { 0x00391, 0x018dc, 0x0b6d4 }, // ( 0.013931, 0.097107, 0.714172 ) |
| }; |
| #else |
| // ninedegreesbelow: ICC D50 White point. |
| s15Fixed16Number primaries[3][3] = { |
| { 0x06fa0, 0x06296, 0x024a0 }, // ( 0.436035, 0.385101, 0.143066 ) |
| { 0x038f2, 0x0b789, 0x00f85 }, // ( 0.222443, 0.716934, 0.060623 ) |
| { 0x0038f, 0x018da, 0x0b6c4 }, // ( 0.013901, 0.097076, 0.713928 ) |
| }; |
| #endif |
| |
| table = build_sRGB_gamma_table(1024); |
| |
| if (!table) |
| return NO_MEM_PROFILE; |
| |
| profile = qcms_profile_create(); |
| |
| if (!profile) { |
| free(table); |
| return NO_MEM_PROFILE; |
| } |
| |
| profile->redTRC = curve_from_table(table, 1024); |
| profile->blueTRC = curve_from_table(table, 1024); |
| profile->greenTRC = curve_from_table(table, 1024); |
| |
| if (!profile->redTRC || !profile->blueTRC || !profile->greenTRC) { |
| qcms_profile_release(profile); |
| free(table); |
| return NO_MEM_PROFILE; |
| } |
| |
| profile->redColorant.X = primaries[0][0]; |
| profile->redColorant.Y = primaries[1][0]; |
| profile->redColorant.Z = primaries[2][0]; |
| |
| profile->greenColorant.X = primaries[0][1]; |
| profile->greenColorant.Y = primaries[1][1]; |
| profile->greenColorant.Z = primaries[2][1]; |
| |
| profile->blueColorant.X = primaries[0][2]; |
| profile->blueColorant.Y = primaries[1][2]; |
| profile->blueColorant.Z = primaries[2][2]; |
| |
| profile->mediaWhitePoint.X = D65.X; |
| profile->mediaWhitePoint.Y = D65.Y; |
| profile->mediaWhitePoint.Z = D65.Z; |
| |
| profile->class = DISPLAY_DEVICE_PROFILE; |
| profile->rendering_intent = QCMS_INTENT_PERCEPTUAL; |
| profile->color_space = RGB_SIGNATURE; |
| profile->pcs = XYZ_SIGNATURE; |
| |
| strcpy(profile->description, "sRGB IEC61966-2.1"); |
| |
| free(table); |
| |
| return profile; |
| } |
| |
| /* qcms_profile_from_memory does not hold a reference to the memory passed in */ |
| qcms_profile* qcms_profile_from_memory(const void *mem, size_t size) |
| { |
| uint32_t length; |
| struct mem_source source; |
| struct mem_source *src = &source; |
| struct tag_index index; |
| qcms_profile *profile; |
| |
| source.buf = mem; |
| source.size = size; |
| source.valid = true; |
| |
| if (size < 4) |
| return INVALID_PROFILE; |
| |
| length = read_u32(src, 0); |
| if (length <= size) { |
| // shrink the area that we can read if appropriate |
| source.size = length; |
| } else { |
| return INVALID_PROFILE; |
| } |
| |
| /* ensure that the profile size is sane so it's easier to reason about */ |
| if (source.size <= 64 || source.size >= MAX_PROFILE_SIZE) |
| return INVALID_PROFILE; |
| |
| profile = qcms_profile_create(); |
| if (!profile) |
| return NO_MEM_PROFILE; |
| |
| check_CMM_type_signature(src); |
| read_profile_version(profile, src); |
| read_class_signature(profile, src); |
| read_rendering_intent(profile, src); |
| read_color_space(profile, src); |
| read_pcs(profile, src); |
| //TODO read rest of profile stuff |
| |
| if (!src->valid) |
| goto invalid_profile; |
| |
| index = read_tag_table(profile, src); |
| if (!src->valid || !index.tags) |
| goto invalid_tag_table; |
| |
| if (!read_tag_descType(profile, src, index, TAG_desc)) |
| goto invalid_tag_table; |
| #if defined(__APPLE__) |
| if (!read_tag_dscmType(profile, src, index, TAG_dscm)) |
| goto invalid_tag_table; |
| if (!read_tag_mmodType(profile, src, index, TAG_mmod)) |
| goto invalid_tag_table; |
| #endif // __APPLE__ |
| |
| if (find_tag(index, TAG_CHAD)) { |
| profile->chromaticAdaption = read_tag_s15Fixed16ArrayType(src, index, TAG_CHAD); |
| } else { |
| profile->chromaticAdaption.invalid = true; //Signal the data is not present |
| } |
| |
| if (find_tag(index, TAG_vcgt)) { |
| if (!read_tag_vcgtType(profile, src, index)) |
| goto invalid_tag_table; |
| } |
| |
| if (profile->class == DISPLAY_DEVICE_PROFILE || profile->class == INPUT_DEVICE_PROFILE || |
| profile->class == OUTPUT_DEVICE_PROFILE || profile->class == COLOR_SPACE_PROFILE) { |
| if (profile->color_space == RGB_SIGNATURE) { |
| if (find_tag(index, TAG_A2B0)) { |
| if (read_u32(src, find_tag(index, TAG_A2B0)->offset) == LUT8_TYPE || |
| read_u32(src, find_tag(index, TAG_A2B0)->offset) == LUT16_TYPE) { |
| profile->A2B0 = read_tag_lutType(src, index, TAG_A2B0); |
| } else if (read_u32(src, find_tag(index, TAG_A2B0)->offset) == LUT_MAB_TYPE) { |
| profile->mAB = read_tag_lutmABType(src, index, TAG_A2B0); |
| } |
| } |
| if (find_tag(index, TAG_B2A0)) { |
| if (read_u32(src, find_tag(index, TAG_B2A0)->offset) == LUT8_TYPE || |
| read_u32(src, find_tag(index, TAG_B2A0)->offset) == LUT16_TYPE) { |
| profile->B2A0 = read_tag_lutType(src, index, TAG_B2A0); |
| } else if (read_u32(src, find_tag(index, TAG_B2A0)->offset) == LUT_MBA_TYPE) { |
| profile->mBA = read_tag_lutmABType(src, index, TAG_B2A0); |
| } |
| } |
| if (find_tag(index, TAG_rXYZ) || !qcms_supports_iccv4) { |
| profile->redColorant = read_tag_XYZType(src, index, TAG_rXYZ); |
| profile->greenColorant = read_tag_XYZType(src, index, TAG_gXYZ); |
| profile->blueColorant = read_tag_XYZType(src, index, TAG_bXYZ); |
| } |
| |
| if (!src->valid) |
| goto invalid_tag_table; |
| |
| if (find_tag(index, TAG_rTRC) || !qcms_supports_iccv4) { |
| profile->redTRC = read_tag_curveType(src, index, TAG_rTRC); |
| profile->greenTRC = read_tag_curveType(src, index, TAG_gTRC); |
| profile->blueTRC = read_tag_curveType(src, index, TAG_bTRC); |
| |
| if (!profile->redTRC || !profile->blueTRC || !profile->greenTRC) |
| goto invalid_tag_table; |
| } |
| } else if (profile->color_space == GRAY_SIGNATURE) { |
| |
| profile->grayTRC = read_tag_curveType(src, index, TAG_kTRC); |
| if (!profile->grayTRC) |
| goto invalid_tag_table; |
| |
| } else { |
| assert(0 && "read_color_space protects against entering here"); |
| goto invalid_tag_table; |
| } |
| } else { |
| goto invalid_tag_table; |
| } |
| |
| // Profiles other than DeviceLink should have a media white point. |
| // Here we read it if present. |
| if (find_tag(index, TAG_wtpt)) { |
| profile->mediaWhitePoint = read_tag_XYZType(src, index, TAG_wtpt); |
| } |
| |
| if (!src->valid) |
| goto invalid_tag_table; |
| |
| free(index.tags); |
| return profile; |
| |
| invalid_tag_table: |
| if (index.tags) |
| free(index.tags); |
| invalid_profile: |
| qcms_profile_release(profile); |
| return INVALID_PROFILE; |
| } |
| |
| qcms_bool qcms_profile_match(qcms_profile *p1, qcms_profile *p2) |
| { |
| return memcmp(p1->description, p2->description, sizeof p1->description) == 0; |
| } |
| |
| const char* qcms_profile_get_description(qcms_profile *profile) |
| { |
| return profile->description; |
| } |
| |
| qcms_intent qcms_profile_get_rendering_intent(qcms_profile *profile) |
| { |
| return profile->rendering_intent; |
| } |
| |
| qcms_color_space qcms_profile_get_color_space(qcms_profile *profile) |
| { |
| return profile->color_space; |
| } |
| |
| unsigned qcms_profile_get_version(qcms_profile *profile) |
| { |
| return profile->icc_version & 0xffff; |
| } |
| |
| size_t qcms_profile_get_vcgt_channel_length(qcms_profile *profile) |
| { |
| return profile->vcgt.length; |
| } |
| |
| // Check unsigned short is uint16_t. |
| typedef char assert_short_not_16b[(sizeof(unsigned short) == sizeof(uint16_t)) ? 1 : -1]; |
| |
| qcms_bool qcms_profile_get_vcgt_rgb_channels(qcms_profile *profile, unsigned short *data) |
| { |
| size_t vcgt_channel_bytes = qcms_profile_get_vcgt_channel_length(profile) * sizeof(uint16_t); |
| |
| if (!vcgt_channel_bytes || !data) |
| return false; |
| |
| memcpy(data, profile->vcgt.data, 3 * vcgt_channel_bytes); |
| return true; |
| } |
| |
| static void lut_release(struct lutType *lut) |
| { |
| free(lut); |
| } |
| |
| void qcms_profile_release(qcms_profile *profile) |
| { |
| if (profile->output_table_r) |
| precache_release(profile->output_table_r); |
| if (profile->output_table_g) |
| precache_release(profile->output_table_g); |
| if (profile->output_table_b) |
| precache_release(profile->output_table_b); |
| |
| if (profile->A2B0) |
| lut_release(profile->A2B0); |
| if (profile->B2A0) |
| lut_release(profile->B2A0); |
| |
| if (profile->mAB) |
| mAB_release(profile->mAB); |
| if (profile->mBA) |
| mAB_release(profile->mBA); |
| |
| if (profile->vcgt.data) |
| free(profile->vcgt.data); |
| |
| free(profile->redTRC); |
| free(profile->blueTRC); |
| free(profile->greenTRC); |
| free(profile->grayTRC); |
| free(profile); |
| } |
| |
| #include <stdio.h> |
| |
| qcms_profile* qcms_profile_from_file(FILE *file) |
| { |
| uint32_t length, remaining_length; |
| qcms_profile *profile; |
| size_t read_length; |
| be32 length_be; |
| void *data; |
| |
| if (fread(&length_be, 1, sizeof(length_be), file) != sizeof(length_be)) |
| return BAD_VALUE_PROFILE; |
| |
| length = be32_to_cpu(length_be); |
| if (length > MAX_PROFILE_SIZE || length < sizeof(length_be)) |
| return BAD_VALUE_PROFILE; |
| |
| /* allocate room for the entire profile */ |
| data = malloc(length); |
| if (!data) |
| return NO_MEM_PROFILE; |
| |
| /* copy in length to the front so that the buffer will contain the entire profile */ |
| *((be32*)data) = length_be; |
| remaining_length = length - sizeof(length_be); |
| |
| /* read the rest profile */ |
| read_length = fread((unsigned char*)data + sizeof(length_be), 1, remaining_length, file); |
| if (read_length != remaining_length) { |
| free(data); |
| return INVALID_PROFILE; |
| } |
| |
| profile = qcms_profile_from_memory(data, length); |
| free(data); |
| return profile; |
| } |
| |
| qcms_profile* qcms_profile_from_path(const char *path) |
| { |
| qcms_profile *profile = NULL; |
| FILE *file = fopen(path, "rb"); |
| if (file) { |
| profile = qcms_profile_from_file(file); |
| fclose(file); |
| } |
| return profile; |
| } |
| |
| #ifdef _WIN32 |
| /* Unicode path version */ |
| qcms_profile* qcms_profile_from_unicode_path(const wchar_t *path) |
| { |
| qcms_profile *profile = NULL; |
| FILE *file = _wfopen(path, L"rb"); |
| if (file) { |
| profile = qcms_profile_from_file(file); |
| fclose(file); |
| } |
| return profile; |
| } |
| #endif |