| /* |
| * Copyright 2015 Google Inc. |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #include "SkCodec.h" |
| #include "SkJpegCodec.h" |
| #include "SkJpegDecoderMgr.h" |
| #include "SkJpegUtility.h" |
| #include "SkCodecPriv.h" |
| #include "SkColorPriv.h" |
| #include "SkStream.h" |
| #include "SkTemplates.h" |
| #include "SkTypes.h" |
| |
| // stdio is needed for jpeglib |
| #include <stdio.h> |
| |
| extern "C" { |
| #include "jerror.h" |
| #include "jmorecfg.h" |
| #include "jpegint.h" |
| #include "jpeglib.h" |
| } |
| |
| // ANDROID_RGB |
| // If this is defined in the jpeg headers it indicates that jpeg offers |
| // support for two additional formats: JCS_RGBA_8888 and JCS_RGB_565. |
| |
| /* |
| * Get the source configuarion for the swizzler |
| */ |
| SkSwizzler::SrcConfig get_src_config(const jpeg_decompress_struct& dinfo) { |
| if (JCS_CMYK == dinfo.out_color_space) { |
| // We will need to perform a manual conversion |
| return SkSwizzler::kRGBX; |
| } |
| if (3 == dinfo.out_color_components && JCS_RGB == dinfo.out_color_space) { |
| return SkSwizzler::kRGB; |
| } |
| #ifdef ANDROID_RGB |
| if (JCS_RGBA_8888 == dinfo.out_color_space) { |
| return SkSwizzler::kRGBX; |
| } |
| |
| if (JCS_RGB_565 == dinfo.out_color_space) { |
| return SkSwizzler::kRGB_565; |
| } |
| #endif |
| if (1 == dinfo.out_color_components && JCS_GRAYSCALE == dinfo.out_color_space) { |
| return SkSwizzler::kGray; |
| } |
| return SkSwizzler::kUnknown; |
| } |
| |
| /* |
| * Convert a row of CMYK samples to RGBX in place. |
| * Note that this method moves the row pointer. |
| * @param width the number of pixels in the row that is being converted |
| * CMYK is stored as four bytes per pixel |
| */ |
| static void convert_CMYK_to_RGB(uint8_t* row, uint32_t width) { |
| // We will implement a crude conversion from CMYK -> RGB using formulas |
| // from easyrgb.com. |
| // |
| // CMYK -> CMY |
| // C = C * (1 - K) + K |
| // M = M * (1 - K) + K |
| // Y = Y * (1 - K) + K |
| // |
| // libjpeg actually gives us inverted CMYK, so we must subtract the |
| // original terms from 1. |
| // CMYK -> CMY |
| // C = (1 - C) * (1 - (1 - K)) + (1 - K) |
| // M = (1 - M) * (1 - (1 - K)) + (1 - K) |
| // Y = (1 - Y) * (1 - (1 - K)) + (1 - K) |
| // |
| // Simplifying the above expression. |
| // CMYK -> CMY |
| // C = 1 - CK |
| // M = 1 - MK |
| // Y = 1 - YK |
| // |
| // CMY -> RGB |
| // R = (1 - C) * 255 |
| // G = (1 - M) * 255 |
| // B = (1 - Y) * 255 |
| // |
| // Therefore the full conversion is below. This can be verified at |
| // www.rapidtables.com (assuming inverted CMYK). |
| // CMYK -> RGB |
| // R = C * K * 255 |
| // G = M * K * 255 |
| // B = Y * K * 255 |
| // |
| // As a final note, we have treated the CMYK values as if they were on |
| // a scale from 0-1, when in fact they are 8-bit ints scaling from 0-255. |
| // We must divide each CMYK component by 255 to obtain the true conversion |
| // we should perform. |
| // CMYK -> RGB |
| // R = C * K / 255 |
| // G = M * K / 255 |
| // B = Y * K / 255 |
| for (uint32_t x = 0; x < width; x++, row += 4) { |
| row[0] = SkMulDiv255Round(row[0], row[3]); |
| row[1] = SkMulDiv255Round(row[1], row[3]); |
| row[2] = SkMulDiv255Round(row[2], row[3]); |
| row[3] = 0xFF; |
| } |
| } |
| |
| bool SkJpegCodec::IsJpeg(SkStream* stream) { |
| static const uint8_t jpegSig[] = { 0xFF, 0xD8, 0xFF }; |
| char buffer[sizeof(jpegSig)]; |
| return stream->read(buffer, sizeof(jpegSig)) == sizeof(jpegSig) && |
| !memcmp(buffer, jpegSig, sizeof(jpegSig)); |
| } |
| |
| bool SkJpegCodec::ReadHeader(SkStream* stream, SkCodec** codecOut, |
| JpegDecoderMgr** decoderMgrOut) { |
| |
| // Create a JpegDecoderMgr to own all of the decompress information |
| SkAutoTDelete<JpegDecoderMgr> decoderMgr(SkNEW_ARGS(JpegDecoderMgr, (stream))); |
| |
| // libjpeg errors will be caught and reported here |
| if (setjmp(decoderMgr->getJmpBuf())) { |
| return decoderMgr->returnFalse("setjmp"); |
| } |
| |
| // Initialize the decompress info and the source manager |
| decoderMgr->init(); |
| |
| // Read the jpeg header |
| if (JPEG_HEADER_OK != jpeg_read_header(decoderMgr->dinfo(), true)) { |
| return decoderMgr->returnFalse("read_header"); |
| } |
| |
| if (NULL != codecOut) { |
| // Recommend the color type to decode to |
| const SkColorType colorType = decoderMgr->getColorType(); |
| |
| // Create image info object and the codec |
| const SkImageInfo& imageInfo = SkImageInfo::Make(decoderMgr->dinfo()->image_width, |
| decoderMgr->dinfo()->image_height, colorType, kOpaque_SkAlphaType); |
| *codecOut = SkNEW_ARGS(SkJpegCodec, (imageInfo, stream, decoderMgr.detach())); |
| } else { |
| SkASSERT(NULL != decoderMgrOut); |
| *decoderMgrOut = decoderMgr.detach(); |
| } |
| return true; |
| } |
| |
| SkCodec* SkJpegCodec::NewFromStream(SkStream* stream) { |
| SkAutoTDelete<SkStream> streamDeleter(stream); |
| SkCodec* codec = NULL; |
| if (ReadHeader(stream, &codec, NULL)) { |
| // Codec has taken ownership of the stream, we do not need to delete it |
| SkASSERT(codec); |
| streamDeleter.detach(); |
| return codec; |
| } |
| return NULL; |
| } |
| |
| SkJpegCodec::SkJpegCodec(const SkImageInfo& srcInfo, SkStream* stream, |
| JpegDecoderMgr* decoderMgr) |
| : INHERITED(srcInfo, stream) |
| , fDecoderMgr(decoderMgr) |
| {} |
| |
| /* |
| * Return a valid set of output dimensions for this decoder, given an input scale |
| */ |
| SkISize SkJpegCodec::onGetScaledDimensions(float desiredScale) const { |
| // libjpeg supports scaling by 1/1, 1/2, 1/4, and 1/8, so we will support these as well |
| long scale; |
| if (desiredScale > 0.75f) { |
| scale = 1; |
| } else if (desiredScale > 0.375f) { |
| scale = 2; |
| } else if (desiredScale > 0.1875f) { |
| scale = 4; |
| } else { |
| scale = 8; |
| } |
| |
| // Set up a fake decompress struct in order to use libjpeg to calculate output dimensions |
| jpeg_decompress_struct dinfo; |
| sk_bzero(&dinfo, sizeof(dinfo)); |
| dinfo.image_width = this->getInfo().width(); |
| dinfo.image_height = this->getInfo().height(); |
| dinfo.global_state = DSTATE_READY; |
| dinfo.num_components = 0; |
| dinfo.scale_num = 1; |
| dinfo.scale_denom = scale; |
| jpeg_calc_output_dimensions(&dinfo); |
| |
| // Return the calculated output dimensions for the given scale |
| return SkISize::Make(dinfo.output_width, dinfo.output_height); |
| } |
| |
| /* |
| * Checks if the conversion between the input image and the requested output |
| * image has been implemented |
| */ |
| static bool conversion_possible(const SkImageInfo& dst, |
| const SkImageInfo& src) { |
| // Ensure that the profile type is unchanged |
| if (dst.profileType() != src.profileType()) { |
| return false; |
| } |
| |
| // Ensure that the alpha type is opaque |
| if (kOpaque_SkAlphaType != dst.alphaType()) { |
| return false; |
| } |
| |
| // Always allow kN32 as the color type |
| if (kN32_SkColorType == dst.colorType()) { |
| return true; |
| } |
| |
| // Otherwise require that the destination color type match our recommendation |
| return dst.colorType() == src.colorType(); |
| } |
| |
| /* |
| * Performs the jpeg decode |
| */ |
| SkCodec::Result SkJpegCodec::onGetPixels(const SkImageInfo& dstInfo, |
| void* dst, size_t dstRowBytes, |
| const Options& options, SkPMColor*, int*) { |
| // Rewind the stream if needed |
| SkCodec::RewindState rewindState = this->rewindIfNeeded(); |
| if (rewindState == kCouldNotRewind_RewindState) { |
| return kCouldNotRewind; |
| } else if (rewindState == kRewound_RewindState) { |
| JpegDecoderMgr* decoderMgr = NULL; |
| if (!ReadHeader(this->stream(), NULL, &decoderMgr)) { |
| return kCouldNotRewind; |
| } |
| SkASSERT(NULL != decoderMgr); |
| fDecoderMgr.reset(decoderMgr); |
| } |
| |
| // Get a pointer to the decompress info since we will use it quite frequently |
| jpeg_decompress_struct* dinfo = fDecoderMgr->dinfo(); |
| |
| // Set the jump location for libjpeg errors |
| if (setjmp(fDecoderMgr->getJmpBuf())) { |
| return fDecoderMgr->returnFailure("setjmp", kInvalidInput); |
| } |
| |
| // Check if we can decode to the requested destination |
| if (!conversion_possible(dstInfo, this->getInfo())) { |
| return fDecoderMgr->returnFailure("conversion_possible", kInvalidConversion); |
| } |
| // Check if we can scale to the requested dimensions |
| // libjpeg can scale to 1/1, 1/2, 1/4, and 1/8 |
| SkASSERT(1 == dinfo->scale_num); |
| SkASSERT(1 == dinfo->scale_denom); |
| jpeg_calc_output_dimensions(dinfo); |
| const uint32_t dstWidth = dstInfo.width(); |
| const uint32_t dstHeight = dstInfo.height(); |
| while (dinfo->output_width != dstWidth || dinfo->output_height != dstHeight) { |
| |
| // Return a failure if we have tried all of the possible scales |
| if (8 == dinfo->scale_denom || |
| dstWidth > dinfo->output_width || |
| dstHeight > dinfo->output_height) { |
| return fDecoderMgr->returnFailure("cannot scale to requested dims", kInvalidScale); |
| } |
| |
| // Try the next scale |
| dinfo->scale_denom *= 2; |
| jpeg_calc_output_dimensions(dinfo); |
| } |
| |
| // Now, given valid output dimensions, we can start the decompress |
| if (!jpeg_start_decompress(dinfo)) { |
| return fDecoderMgr->returnFailure("startDecompress", kInvalidInput); |
| } |
| |
| // Create the swizzler |
| SkSwizzler::SrcConfig srcConfig = get_src_config(*dinfo); |
| SkAutoTDelete<SkSwizzler> swizzler(SkSwizzler::CreateSwizzler(srcConfig, NULL, dstInfo, dst, |
| dstRowBytes, options.fZeroInitialized)); |
| if (NULL == swizzler) { |
| return fDecoderMgr->returnFailure("getSwizzler", kInvalidInput); |
| } |
| const uint32_t srcBytesPerPixel = SkSwizzler::BytesPerPixel(srcConfig); |
| |
| // This is usually 1, but can also be 2 or 4. |
| // If we wanted to always read one row at a time, we could, but we will save space and time |
| // by using the recommendation from libjpeg. |
| const uint32_t rowsPerDecode = dinfo->rec_outbuf_height; |
| SkASSERT(rowsPerDecode <= 4); |
| |
| // Create a buffer to contain decoded rows (libjpeg requires a 2D array) |
| const uint32_t srcRowBytes = srcBytesPerPixel * dstWidth; |
| SkAutoTDeleteArray<uint8_t> srcBuffer(SkNEW_ARRAY(uint8_t, srcRowBytes * rowsPerDecode)); |
| JSAMPLE* srcRows[4]; |
| uint8_t* srcPtr = srcBuffer.get(); |
| for (uint8_t i = 0; i < rowsPerDecode; i++) { |
| srcRows[i] = (JSAMPLE*) srcPtr; |
| srcPtr += srcRowBytes; |
| } |
| |
| // Ensure that we loop enough times to decode all of the rows |
| // libjpeg will prevent us from reading past the bottom of the image |
| for (uint32_t y = 0; y < dstHeight + rowsPerDecode - 1; y += rowsPerDecode) { |
| // Read rows of the image |
| uint32_t rowsDecoded = jpeg_read_scanlines(dinfo, srcRows, rowsPerDecode); |
| |
| // Convert to RGB if necessary |
| if (JCS_CMYK == dinfo->out_color_space) { |
| convert_CMYK_to_RGB(srcRows[0], dstWidth * rowsDecoded); |
| } |
| |
| // Swizzle to output destination |
| for (uint32_t i = 0; i < rowsDecoded; i++) { |
| swizzler->next(srcRows[i]); |
| } |
| |
| // If we cannot read enough rows, assume the input is incomplete |
| if (rowsDecoded < rowsPerDecode && y + rowsDecoded < dstHeight) { |
| // Fill the remainder of the image with black. This error handling |
| // behavior is unspecified but SkCodec consistently uses black as |
| // the fill color for opaque images. If the destination is kGray, |
| // the low 8 bits of SK_ColorBLACK will be used. Conveniently, |
| // these are zeros, which is the representation for black in kGray. |
| SkSwizzler::Fill(swizzler->getDstRow(), dstInfo, dstRowBytes, |
| dstHeight - y - rowsDecoded, SK_ColorBLACK, NULL); |
| |
| // Prevent libjpeg from failing on incomplete decode |
| dinfo->output_scanline = dstHeight; |
| |
| // Finish the decode and indicate that the input was incomplete. |
| jpeg_finish_decompress(dinfo); |
| return fDecoderMgr->returnFailure("Incomplete image data", kIncompleteInput); |
| } |
| } |
| jpeg_finish_decompress(dinfo); |
| |
| return kSuccess; |
| } |