| /* |
| * Copyright 2012 Google Inc. |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #include "GrStrokePathRenderer.h" |
| |
| #include "GrDrawTarget.h" |
| #include "SkPath.h" |
| #include "SkStrokeRec.h" |
| |
| namespace { |
| |
| bool is_clockwise(const SkVector& before, const SkVector& after) { |
| return before.cross(after) > 0; |
| } |
| |
| enum IntersectionType { |
| kNone_IntersectionType, |
| kIn_IntersectionType, |
| kOut_IntersectionType |
| }; |
| |
| IntersectionType intersection(const SkPoint& p1, const SkPoint& p2, |
| const SkPoint& p3, const SkPoint& p4, |
| SkPoint& res) { |
| // Store the values for fast access and easy |
| // equations-to-code conversion |
| SkScalar x1 = p1.x(), x2 = p2.x(), x3 = p3.x(), x4 = p4.x(); |
| SkScalar y1 = p1.y(), y2 = p2.y(), y3 = p3.y(), y4 = p4.y(); |
| |
| SkScalar d = SkScalarMul(x1 - x2, y3 - y4) - SkScalarMul(y1 - y2, x3 - x4); |
| // If d is zero, there is no intersection |
| if (SkScalarNearlyZero(d)) { |
| return kNone_IntersectionType; |
| } |
| |
| // Get the x and y |
| SkScalar pre = SkScalarMul(x1, y2) - SkScalarMul(y1, x2), |
| post = SkScalarMul(x3, y4) - SkScalarMul(y3, x4); |
| // Compute the point of intersection |
| res.set(SkScalarDiv(SkScalarMul(pre, x3 - x4) - SkScalarMul(x1 - x2, post), d), |
| SkScalarDiv(SkScalarMul(pre, y3 - y4) - SkScalarMul(y1 - y2, post), d)); |
| |
| // Check if the x and y coordinates are within both lines |
| return (res.x() < GrMin(x1, x2) || res.x() > GrMax(x1, x2) || |
| res.x() < GrMin(x3, x4) || res.x() > GrMax(x3, x4) || |
| res.y() < GrMin(y1, y2) || res.y() > GrMax(y1, y2) || |
| res.y() < GrMin(y3, y4) || res.y() > GrMax(y3, y4)) ? |
| kOut_IntersectionType : kIn_IntersectionType; |
| } |
| |
| } // namespace |
| |
| GrStrokePathRenderer::GrStrokePathRenderer() { |
| } |
| |
| bool GrStrokePathRenderer::canDrawPath(const SkPath& path, |
| const SkStrokeRec& stroke, |
| const GrDrawTarget* target, |
| bool antiAlias) const { |
| // FIXME : put the proper condition once GrDrawTarget::isOpaque is implemented |
| const bool isOpaque = true; // target->isOpaque(); |
| |
| // FIXME : remove this requirement once we have AA circles and implement the |
| // circle joins/caps appropriately in the ::onDrawPath() function. |
| const bool requiresAACircle = (stroke.getCap() == SkPaint::kRound_Cap) || |
| (stroke.getJoin() == SkPaint::kRound_Join); |
| |
| // Indices being stored in uint16, we don't want to overflow the indices capacity |
| static const int maxVBSize = 1 << 16; |
| const int maxNbVerts = (path.countPoints() + 1) * 5; |
| |
| // Check that the path contains no curved lines, only straight lines |
| static const uint32_t unsupportedMask = SkPath::kQuad_SegmentMask | SkPath::kCubic_SegmentMask; |
| |
| // Must not be filled nor hairline nor semi-transparent |
| // Note : May require a check to path.isConvex() if AA is supported |
| return ((stroke.getStyle() == SkStrokeRec::kStroke_Style) && (maxNbVerts < maxVBSize) && |
| !path.isInverseFillType() && isOpaque && !requiresAACircle && !antiAlias && |
| ((path.getSegmentMasks() & unsupportedMask) == 0)); |
| } |
| |
| bool GrStrokePathRenderer::onDrawPath(const SkPath& origPath, |
| const SkStrokeRec& stroke, |
| GrDrawTarget* target, |
| bool antiAlias) { |
| if (origPath.isEmpty()) { |
| return true; |
| } |
| |
| SkScalar width = stroke.getWidth(); |
| if (width <= 0) { |
| return false; |
| } |
| |
| // Get the join type |
| SkPaint::Join join = stroke.getJoin(); |
| SkScalar miterLimit = stroke.getMiter(); |
| SkScalar sqMiterLimit = SkScalarMul(miterLimit, miterLimit); |
| if ((join == SkPaint::kMiter_Join) && (miterLimit <= SK_Scalar1)) { |
| // If the miter limit is small, treat it as a bevel join |
| join = SkPaint::kBevel_Join; |
| } |
| const bool isMiter = (join == SkPaint::kMiter_Join); |
| const bool isBevel = (join == SkPaint::kBevel_Join); |
| SkScalar invMiterLimit = isMiter ? SK_Scalar1 / miterLimit : 0; |
| SkScalar invMiterLimitSq = SkScalarMul(invMiterLimit, invMiterLimit); |
| |
| // Allocate vertices |
| const int nbQuads = origPath.countPoints() + 1; // Could be "-1" if path is not closed |
| const int extraVerts = isMiter || isBevel ? 1 : 0; |
| const int maxVertexCount = nbQuads * (4 + extraVerts); |
| const int maxIndexCount = nbQuads * (6 + extraVerts * 3); // Each extra vert adds a triangle |
| target->drawState()->setDefaultVertexAttribs(); |
| GrDrawTarget::AutoReleaseGeometry arg(target, maxVertexCount, maxIndexCount); |
| if (!arg.succeeded()) { |
| return false; |
| } |
| SkPoint* verts = reinterpret_cast<SkPoint*>(arg.vertices()); |
| uint16_t* idxs = reinterpret_cast<uint16_t*>(arg.indices()); |
| int vCount = 0, iCount = 0; |
| |
| // Transform the path into a list of triangles |
| SkPath::Iter iter(origPath, false); |
| SkPoint pts[4]; |
| const SkScalar radius = SkScalarMul(width, 0.5f); |
| SkPoint *firstPt = verts, *lastPt = NULL; |
| SkVector firstDir, dir; |
| firstDir.set(0, 0); |
| dir.set(0, 0); |
| bool isOpen = true; |
| for(SkPath::Verb v = iter.next(pts); v != SkPath::kDone_Verb; v = iter.next(pts)) { |
| switch(v) { |
| case SkPath::kMove_Verb: |
| // This will already be handled as pts[0] of the 1st line |
| break; |
| case SkPath::kClose_Verb: |
| isOpen = (lastPt == NULL); |
| break; |
| case SkPath::kLine_Verb: |
| { |
| SkVector v0 = dir; |
| dir = pts[1] - pts[0]; |
| if (dir.setLength(radius)) { |
| SkVector dirT; |
| dirT.set(dir.fY, -dir.fX); // Get perpendicular direction |
| SkPoint l1a = pts[0]+dirT, l1b = pts[1]+dirT, |
| l2a = pts[0]-dirT, l2b = pts[1]-dirT; |
| SkPoint miterPt[2]; |
| bool useMiterPoint = false; |
| int idx0(-1), idx1(-1); |
| if (NULL == lastPt) { |
| firstDir = dir; |
| } else { |
| SkVector v1 = dir; |
| if (v0.normalize() && v1.normalize()) { |
| SkScalar dotProd = v0.dot(v1); |
| // No need for bevel or miter join if the angle |
| // is either 0 or 180 degrees |
| if (!SkScalarNearlyZero(dotProd + SK_Scalar1) && |
| !SkScalarNearlyZero(dotProd - SK_Scalar1)) { |
| bool ccw = !is_clockwise(v0, v1); |
| int offset = ccw ? 1 : 0; |
| idx0 = vCount-2+offset; |
| idx1 = vCount+offset; |
| const SkPoint* pt0 = &(lastPt[offset]); |
| const SkPoint* pt1 = ccw ? &l2a : &l1a; |
| switch(join) { |
| case SkPaint::kMiter_Join: |
| { |
| // *Note : Logic is from MiterJoiner |
| |
| // FIXME : Special case if we have a right angle ? |
| // if (SkScalarNearlyZero(dotProd)) {...} |
| |
| SkScalar sinHalfAngleSq = |
| SkScalarHalf(SK_Scalar1 + dotProd); |
| if (sinHalfAngleSq >= invMiterLimitSq) { |
| // Find the miter point (or points if it is further |
| // than the miter limit) |
| const SkPoint pt2 = *pt0+v0, pt3 = *pt1+v1; |
| if (intersection(*pt0, pt2, *pt1, pt3, miterPt[0]) != |
| kNone_IntersectionType) { |
| SkPoint miterPt0 = miterPt[0] - *pt0; |
| SkPoint miterPt1 = miterPt[0] - *pt1; |
| SkScalar sqDist0 = miterPt0.dot(miterPt0); |
| SkScalar sqDist1 = miterPt1.dot(miterPt1); |
| const SkScalar rSq = |
| SkScalarDiv(SkScalarMul(radius, radius), |
| sinHalfAngleSq); |
| const SkScalar sqRLimit = |
| SkScalarMul(sqMiterLimit, rSq); |
| if (sqDist0 > sqRLimit || sqDist1 > sqRLimit) { |
| if (sqDist1 > sqRLimit) { |
| v1.setLength(SkScalarSqrt(sqRLimit)); |
| miterPt[1] = *pt1+v1; |
| } else { |
| miterPt[1] = miterPt[0]; |
| } |
| if (sqDist0 > sqRLimit) { |
| v0.setLength(SkScalarSqrt(sqRLimit)); |
| miterPt[0] = *pt0+v0; |
| } |
| } else { |
| miterPt[1] = miterPt[0]; |
| } |
| useMiterPoint = true; |
| } |
| } |
| if (useMiterPoint && (miterPt[1] == miterPt[0])) { |
| break; |
| } |
| } |
| default: |
| case SkPaint::kBevel_Join: |
| { |
| // Note : This currently causes some overdraw where both |
| // lines initially intersect. We'd need to add |
| // another line intersection check here if the |
| // overdraw becomes an issue instead of using the |
| // current point directly. |
| |
| // Add center point |
| *verts++ = pts[0]; // Use current point directly |
| // This idx is passed the current point so increment it |
| ++idx1; |
| // Add center triangle |
| *idxs++ = idx0; |
| *idxs++ = vCount; |
| *idxs++ = idx1; |
| vCount++; |
| iCount += 3; |
| } |
| break; |
| } |
| } |
| } |
| } |
| *verts++ = l1a; |
| *verts++ = l2a; |
| lastPt = verts; |
| *verts++ = l1b; |
| *verts++ = l2b; |
| |
| if (useMiterPoint && (idx0 >= 0) && (idx1 >= 0)) { |
| firstPt[idx0] = miterPt[0]; |
| firstPt[idx1] = miterPt[1]; |
| } |
| |
| // 1st triangle |
| *idxs++ = vCount+0; |
| *idxs++ = vCount+2; |
| *idxs++ = vCount+1; |
| // 2nd triangle |
| *idxs++ = vCount+1; |
| *idxs++ = vCount+2; |
| *idxs++ = vCount+3; |
| |
| vCount += 4; |
| iCount += 6; |
| } |
| } |
| break; |
| case SkPath::kQuad_Verb: |
| case SkPath::kCubic_Verb: |
| SkDEBUGFAIL("Curves not supported!"); |
| default: |
| // Unhandled cases |
| SkASSERT(false); |
| } |
| } |
| |
| if (isOpen) { |
| // Add caps |
| switch (stroke.getCap()) { |
| case SkPaint::kSquare_Cap: |
| firstPt[0] -= firstDir; |
| firstPt[1] -= firstDir; |
| lastPt [0] += dir; |
| lastPt [1] += dir; |
| break; |
| case SkPaint::kRound_Cap: |
| SkDEBUGFAIL("Round caps not supported!"); |
| default: // No cap |
| break; |
| } |
| } |
| |
| SkASSERT(vCount <= maxVertexCount); |
| SkASSERT(iCount <= maxIndexCount); |
| |
| if (vCount > 0) { |
| target->drawIndexed(kTriangles_GrPrimitiveType, |
| 0, // start vertex |
| 0, // start index |
| vCount, |
| iCount); |
| } |
| |
| return true; |
| } |