| // This file was extracted from the TCG Published |
| // Trusted Platform Module Library |
| // Part 4: Supporting Routines |
| // Family "2.0" |
| // Level 00 Revision 01.16 |
| // October 30, 2014 |
| |
| #ifndef GLOBAL_H |
| #define GLOBAL_H |
| //#define SELF_TEST |
| #include "TpmBuildSwitches.h" |
| #include "Tpm.h" |
| #include "TPMB.h" |
| #include "CryptoEngine.h" |
| #include <setjmp.h> |
| // |
| // |
| // |
| // Defines and Types |
| // |
| // Unreferenced Parameter |
| // |
| // This define is used to eliminate the compiler warning about an unreferenced parameter. Basically, it tells |
| // the compiler that it is not an accident that the parameter is unreferenced. |
| // |
| #ifndef UNREFERENCED_PARAMETER |
| # define UNREFERENCED_PARAMETER(a) (a) |
| #endif |
| #include "bits.h" |
| // |
| // |
| // Crypto Self-Test Values |
| // |
| // Define these values here if the AlgorithmTests() project is not used |
| // |
| #ifndef SELF_TEST |
| extern ALGORITHM_VECTOR g_implementedAlgorithms; |
| extern ALGORITHM_VECTOR g_toTest; |
| #else |
| LIB_IMPORT extern ALGORITHM_VECTOR g_implementedAlgorithms; |
| LIB_IMPORT extern ALGORITHM_VECTOR g_toTest; |
| #endif |
| // |
| // These macros are used in CryptUtil() to invoke the incremental self test. |
| // |
| #define TEST(alg) if(TEST_BIT(alg, g_toTest)) CryptTestAlgorithm(alg, NULL) |
| // |
| // Use of TPM_ALG_NULL is reserved for RSAEP/RSADP testing. If someone is wanting to test a hash with |
| // that value, don't do it. |
| // |
| #define TEST_HASH(alg) \ |
| if( TEST_BIT(alg, g_toTest) \ |
| && (alg != ALG_NULL_VALUE)) \ |
| CryptTestAlgorithm(alg, NULL) |
| // |
| // |
| // Hash and HMAC State Structures |
| // |
| // These definitions are for the types that can be in a hash state structure. These types are used in the |
| // crypto utilities |
| // |
| typedef BYTE HASH_STATE_TYPE; |
| #define HASH_STATE_EMPTY ((HASH_STATE_TYPE) 0) |
| #define HASH_STATE_HASH ((HASH_STATE_TYPE) 1) |
| #define HASH_STATE_HMAC ((HASH_STATE_TYPE) 2) |
| // |
| // A HASH_STATE structure contains an opaque hash stack state. A caller would use this structure when |
| // performing incremental hash operations. The state is updated on each call. If type is an HMAC_STATE, |
| // or HMAC_STATE_SEQUENCE then state is followed by the HMAC key in oPad format. |
| // |
| typedef struct |
| { |
| CPRI_HASH_STATE state; // hash state |
| HASH_STATE_TYPE type; // type of the context |
| } HASH_STATE; |
| // |
| // |
| // |
| // |
| // An HMAC_STATE structure contains an opaque HMAC stack state. A caller would use this structure |
| // when performing incremental HMAC operations. This structure contains a hash state and an HMAC key |
| // and allows slightly better stack optimization than adding an HMAC key to each hash state. |
| // |
| typedef struct |
| { |
| HASH_STATE hashState; // the hash state |
| TPM2B_HASH_BLOCK hmacKey; // the HMAC key |
| } HMAC_STATE; |
| // |
| // |
| // Other Types |
| // |
| // An AUTH_VALUE is a BYTE array containing a digest (TPMU_HA) |
| // |
| typedef BYTE AUTH_VALUE[sizeof(TPMU_HA)]; |
| // |
| // A TIME_INFO is a BYTE array that can contain a TPMS_TIME_INFO |
| // |
| typedef BYTE TIME_INFO[sizeof(TPMS_TIME_INFO)]; |
| // |
| // A NAME is a BYTE array that can contain a TPMU_NAME |
| // |
| typedef BYTE NAME[sizeof(TPMU_NAME)]; |
| // |
| // |
| // Loaded Object Structures |
| // |
| // Description |
| // |
| // The structures in this section define the object layout as it exists in TPM memory. |
| // Two types of objects are defined: an ordinary object such as a key, and a sequence object that may be a |
| // hash, HMAC, or event. |
| // |
| // OBJECT_ATTRIBUTES |
| // |
| // An OBJECT_ATTRIBUTES structure contains the variable attributes of an object. These properties are |
| // not part of the public properties but are used by the TPM in managing the object. An |
| // OBJECT_ATTRIBUTES is used in the definition of the OBJECT data type. |
| // |
| typedef struct |
| { |
| unsigned publicOnly : 1; //0) SET if only the public portion of |
| // an object is loaded |
| unsigned epsHierarchy : 1; //1) SET if the object belongs to EPS |
| // Hierarchy |
| unsigned ppsHierarchy : 1; //2) SET if the object belongs to PPS |
| // Hierarchy |
| unsigned spsHierarchy : 1; //3) SET f the object belongs to SPS |
| // Hierarchy |
| unsigned evict : 1; //4) SET if the object is a platform or |
| // owner evict object. Platform- |
| // evict object belongs to PPS |
| // hierarchy, owner-evict object |
| // belongs to SPS or EPS hierarchy. |
| // This bit is also used to mark a |
| // completed sequence object so it |
| // will be flush when the |
| // SequenceComplete command succeeds. |
| unsigned primary : 1; //5) SET for a primary object |
| unsigned temporary : 1; |
| //6) SET for a temporary object |
| unsigned stClear : 1; |
| //7) SET for an stClear object |
| unsigned hmacSeq : 1; |
| //8) SET for an HMAC sequence object |
| unsigned hashSeq : 1; |
| //9) SET for a hash sequence object |
| unsigned eventSeq : 1; |
| //10) SET for an event sequence object |
| unsigned ticketSafe : 1; |
| //11) SET if a ticket is safe to create |
| // for hash sequence object |
| unsigned firstBlock : 1; //12) SET if the first block of hash |
| // data has been received. It |
| // works with ticketSafe bit |
| unsigned isParent : 1; //13) SET if the key has the proper |
| // attributes to be a parent key |
| unsigned privateExp : 1; //14) SET when the private exponent |
| // of an RSA key has been validated. |
| unsigned reserved : 1; //15) reserved bits. unused. |
| } OBJECT_ATTRIBUTES; |
| // |
| // |
| // OBJECT Structure |
| // |
| // An OBJECT structure holds the object public, sensitive, and meta-data associated. This structure is |
| // implementation dependent. For this implementation, the structure is not optimized for space but rather for |
| // clarity of the reference implementation. Other implementations may choose to overlap portions of the |
| // structure that are not used simultaneously. These changes would necessitate changes to the source code |
| // but those changes would be compatible with the reference implementation. |
| // |
| typedef struct |
| { |
| // The attributes field is required to be first followed by the publicArea. |
| // This allows the overlay of the object structure and a sequence structure |
| OBJECT_ATTRIBUTES attributes; // object attributes |
| TPMT_PUBLIC publicArea; // public area of an object |
| TPMT_SENSITIVE sensitive; // sensitive area of an object |
| #ifdef TPM_ALG_RSA |
| TPM2B_PUBLIC_KEY_RSA privateExponent; // Additional field for the private |
| // exponent of an RSA key. |
| #endif |
| TPM2B_NAME qualifiedName; // object qualified name |
| TPMI_DH_OBJECT evictHandle; // if the object is an evict object, |
| // the original handle is kept here. |
| // The 'working' handle will be the |
| // handle of an object slot. |
| TPM2B_NAME name; // Name of the object name. Kept here |
| // to avoid repeatedly computing it. |
| } OBJECT; |
| // |
| // |
| // HASH_OBJECT Structure |
| // |
| // This structure holds a hash sequence object or an event sequence object. |
| // The first four components of this structure are manually set to be the same as the first four components of |
| // the object structure. This prevents the object from being inadvertently misused as sequence objects |
| // occupy the same memory as a regular object. A debug check is present to make sure that the offsets are |
| // what they are supposed to be. |
| // |
| typedef struct |
| { |
| OBJECT_ATTRIBUTES attributes; // The attributes of the HASH object |
| TPMI_ALG_PUBLIC type; // algorithm |
| TPMI_ALG_HASH nameAlg; // name algorithm |
| TPMA_OBJECT objectAttributes; // object attributes |
| // The data below is unique to a sequence object |
| TPM2B_AUTH auth; // auth for use of sequence |
| union |
| { |
| HASH_STATE hashState[HASH_COUNT]; |
| HMAC_STATE hmacState; |
| } state; |
| } HASH_OBJECT; |
| // |
| // |
| // ANY_OBJECT |
| // |
| // This is the union for holding either a sequence object or a regular object. |
| // |
| typedef union |
| { |
| OBJECT entity; |
| HASH_OBJECT hash; |
| } ANY_OBJECT; |
| // |
| // |
| // AUTH_DUP Types |
| // |
| // These values are used in the authorization processing. |
| // |
| typedef UINT32 AUTH_ROLE; |
| #define AUTH_NONE ((AUTH_ROLE)(0)) |
| #define AUTH_USER ((AUTH_ROLE)(1)) |
| #define AUTH_ADMIN ((AUTH_ROLE)(2)) |
| #define AUTH_DUP ((AUTH_ROLE)(3)) |
| // |
| // |
| // Active Session Context |
| // |
| // Description |
| // |
| // The structures in this section define the internal structure of a session context. |
| // |
| // SESSION_ATTRIBUTES |
| // |
| // The attributes in the SESSION_ATTRIBUTES structure track the various properties of the session. It |
| // maintains most of the tracking state information for the policy session. It is used within the SESSION |
| // structure. |
| // |
| typedef struct |
| { |
| unsigned isPolicy : 1; //1) SET if the session may only |
| // be used for policy |
| unsigned isAudit : 1; //2) SET if the session is used |
| // for audit |
| unsigned isBound : 1; //3) SET if the session is bound to |
| // with an entity. |
| // This attribute will be CLEAR if |
| // either isPolicy or isAudit is SET. |
| unsigned iscpHashDefined : 1;//4) SET if the cpHash has been defined |
| // This attribute is not SET unless |
| // 'isPolicy' is SET. |
| unsigned isAuthValueNeeded : 1; |
| //5) SET if the authValue is required |
| // for computing the session HMAC. |
| // This attribute is not SET unless |
| // isPolicy is SET. |
| unsigned isPasswordNeeded : 1; |
| //6) SET if a password authValue is |
| // required for authorization |
| // This attribute is not SET unless |
| // isPolicy is SET. |
| unsigned isPPRequired : 1; //7) SET if physical presence is |
| // required to be asserted when the |
| // authorization is checked. |
| // This attribute is not SET unless |
| // isPolicy is SET. |
| unsigned isTrialPolicy : 1; //8) SET if the policy session is |
| // created for trial of the policy's |
| // policyHash generation. |
| // This attribute is not SET unless |
| // isPolicy is SET. |
| unsigned isDaBound : 1; //9) SET if the bind entity had noDA |
| // CLEAR. If this is SET, then an |
| // auth failure using this session |
| // will count against lockout even |
| // if the object being authorized is |
| // exempt from DA. |
| unsigned isLockoutBound : 1; //10)SET if the session is bound to |
| // lockoutAuth. |
| unsigned requestWasBound : 1;//11) SET if the session is being used |
| // with the bind entity. If SET |
| // the authValue will not be use |
| // in the response HMAC computation. |
| unsigned checkNvWritten : 1; //12) SET if the TPMA_NV_WRITTEN |
| // attribute needs to be checked |
| // when the policy is used for |
| // authorization for NV access. |
| // If this is SET for any other |
| // type, the policy will fail. |
| unsigned nvWrittenState : 1; //13) SET if TPMA_NV_WRITTEN is |
| // required to be SET. |
| } SESSION_ATTRIBUTES; |
| // |
| // |
| // SESSION Structure |
| // |
| // The SESSION structure contains all the context of a session except for the associated contextID. |
| // |
| // NOTE: The contextID of a session is only relevant when the session context is stored off the TPM. |
| // |
| typedef struct |
| { |
| TPM_ALG_ID authHashAlg; // session hash algorithm |
| TPM2B_NONCE nonceTPM; // last TPM-generated nonce for |
| // this session |
| TPMT_SYM_DEF symmetric; // session symmetric algorithm (if any) |
| TPM2B_AUTH sessionKey; // session secret value used for |
| // generating HMAC and encryption keys |
| SESSION_ATTRIBUTES attributes; // session attributes |
| TPM_CC commandCode; // command code (policy session) |
| TPMA_LOCALITY commandLocality; // command locality (policy session) |
| UINT32 pcrCounter; // PCR counter value when PCR is |
| // included (policy session) |
| // If no PCR is included, this |
| // value is 0. |
| UINT64 startTime; // value of TPMS_CLOCK_INFO.clock when |
| // the session was started (policy |
| // |
| // session) |
| UINT64 timeOut; // timeout relative to |
| // TPMS_CLOCK_INFO.clock |
| // There is no timeout if this value |
| // is 0. |
| union |
| { |
| TPM2B_NAME boundEntity; // value used to track the entity to |
| // which the session is bound |
| TPM2B_DIGEST cpHash; // the required cpHash value for the |
| // command being authorized |
| } u1; // 'boundEntity' and 'cpHash' may |
| // share the same space to save memory |
| union |
| { |
| TPM2B_DIGEST auditDigest; // audit session digest |
| TPM2B_DIGEST policyDigest; // policyHash |
| } u2; // audit log and policyHash may |
| // share space to save memory |
| } SESSION; |
| // |
| // |
| // PCR |
| // |
| // PCR_SAVE Structure |
| // |
| // The PCR_SAVE structure type contains the PCR data that are saved across power cycles. Only the static |
| // PCR are required to be saved across power cycles. The DRTM and resettable PCR are not saved. The |
| // number of static and resettable PCR is determined by the platform-specific specification to which the TPM |
| // is built. |
| // |
| typedef struct |
| { |
| #ifdef TPM_ALG_SHA1 |
| BYTE sha1[NUM_STATIC_PCR][SHA1_DIGEST_SIZE]; |
| #endif |
| #ifdef TPM_ALG_SHA256 |
| BYTE sha256[NUM_STATIC_PCR][SHA256_DIGEST_SIZE]; |
| #endif |
| #ifdef TPM_ALG_SHA384 |
| BYTE sha384[NUM_STATIC_PCR][SHA384_DIGEST_SIZE]; |
| #endif |
| #ifdef TPM_ALG_SHA512 |
| BYTE sha512[NUM_STATIC_PCR][SHA512_DIGEST_SIZE]; |
| #endif |
| #ifdef TPM_ALG_SM3_256 |
| BYTE sm3_256[NUM_STATIC_PCR][SM3_256_DIGEST_SIZE]; |
| #endif |
| // This counter increments whenever the PCR are updated. |
| // NOTE: A platform-specific specification may designate |
| // certain PCR changes as not causing this counter |
| // to increment. |
| UINT32 pcrCounter; |
| } PCR_SAVE; |
| // |
| // |
| // |
| // PCR_POLICY |
| // |
| // This structure holds the PCR policies, one for each group of PCR controlled by policy. |
| // |
| typedef struct |
| { |
| TPMI_ALG_HASH hashAlg[NUM_POLICY_PCR_GROUP]; |
| TPM2B_DIGEST a; |
| TPM2B_DIGEST policy[NUM_POLICY_PCR_GROUP]; |
| } PCR_POLICY; |
| // |
| // |
| // PCR_AUTHVALUE |
| // |
| // This structure holds the PCR policies, one for each group of PCR controlled by policy. |
| // |
| typedef struct |
| { |
| TPM2B_DIGEST auth[NUM_AUTHVALUE_PCR_GROUP]; |
| } PCR_AUTHVALUE; |
| // |
| // |
| // Startup |
| // |
| // SHUTDOWN_NONE |
| // |
| // Part 2 defines the two shutdown/startup types that may be used in TPM2_Shutdown() and |
| // TPM2_Starup(). This additional define is used by the TPM to indicate that no shutdown was received. |
| // |
| // NOTE: This is a reserved value. |
| // |
| #define SHUTDOWN_NONE (TPM_SU)(0xFFFF) |
| // |
| // |
| // STARTUP_TYPE |
| // |
| // This enumeration is the possible startup types. The type is determined by the combination of |
| // TPM2_ShutDown() and TPM2_Startup(). |
| // |
| typedef enum |
| { |
| SU_RESET, |
| SU_RESTART, |
| SU_RESUME |
| } STARTUP_TYPE; |
| // |
| // |
| // NV |
| // |
| // NV_RESERVE |
| // |
| // This enumeration defines the master list of the elements of a reserved portion of NV. This list includes all |
| // the pre-defined data that takes space in NV, either as persistent data or as state save data. The |
| // enumerations are used as indexes into an array of offset values. The offset values then are used to index |
| // into NV. This is method provides an imperfect analog to an actual NV implementation. |
| // |
| typedef enum |
| { |
| // Entries below mirror the PERSISTENT_DATA structure. These values are written |
| // to NV as individual items. |
| // hierarchy |
| NV_DISABLE_CLEAR, |
| NV_OWNER_ALG, |
| NV_ENDORSEMENT_ALG, |
| NV_LOCKOUT_ALG, |
| NV_OWNER_POLICY, |
| NV_ENDORSEMENT_POLICY, |
| NV_LOCKOUT_POLICY, |
| NV_OWNER_AUTH, |
| NV_ENDORSEMENT_AUTH, |
| NV_LOCKOUT_AUTH, |
| NV_EP_SEED, |
| NV_SP_SEED, |
| NV_PP_SEED, |
| NV_PH_PROOF, |
| NV_SH_PROOF, |
| NV_EH_PROOF, |
| // Time |
| NV_TOTAL_RESET_COUNT, |
| NV_RESET_COUNT, |
| // PCR |
| NV_PCR_POLICIES, |
| NV_PCR_ALLOCATED, |
| // Physical Presence |
| NV_PP_LIST, |
| // Dictionary Attack |
| NV_FAILED_TRIES, |
| NV_MAX_TRIES, |
| NV_RECOVERY_TIME, |
| NV_LOCKOUT_RECOVERY, |
| NV_LOCKOUT_AUTH_ENABLED, |
| // Orderly State flag |
| NV_ORDERLY, |
| // Command Audit |
| NV_AUDIT_COMMANDS, |
| NV_AUDIT_HASH_ALG, |
| NV_AUDIT_COUNTER, |
| // Algorithm Set |
| NV_ALGORITHM_SET, |
| NV_FIRMWARE_V1, |
| NV_FIRMWARE_V2, |
| // The entries above are in PERSISTENT_DATA. The entries below represent |
| // structures that are read and written as a unit. |
| // ORDERLY_DATA data structure written on each orderly shutdown |
| NV_ORDERLY_DATA, |
| // STATE_CLEAR_DATA structure written on each Shutdown(STATE) |
| NV_STATE_CLEAR, |
| // STATE_RESET_DATA structure written on each Shutdown(STATE) |
| NV_STATE_RESET, |
| NV_RESERVE_LAST // end of NV reserved data list |
| } NV_RESERVE; |
| // |
| // NV_INDEX |
| // |
| // The NV_INDEX structure defines the internal format for an NV index. The indexData size varies |
| // according to the type of the index. In this implementation, all of the index is manipulated as a unit. |
| // |
| typedef struct |
| { |
| TPMS_NV_PUBLIC publicArea; |
| TPM2B_AUTH authValue; |
| } NV_INDEX; |
| // |
| // |
| // COMMIT_INDEX_MASK |
| // |
| // This is the define for the mask value that is used when manipulating the bits in the commit bit array. The |
| // commit counter is a 64-bit value and the low order bits are used to index the commitArray. This mask |
| // value is applied to the commit counter to extract the bit number in the array. |
| // |
| #ifdef TPM_ALG_ECC |
| #define COMMIT_INDEX_MASK ((UINT16)((sizeof(gr.commitArray)*8)-1)) |
| #endif |
| // |
| // |
| // RAM Global Values |
| // |
| // Description |
| // |
| // The values in this section are only extant in RAM. They are defined here and instanced in Global.c. |
| // |
| // g_rcIndex |
| // |
| // This array is used to contain the array of values that are added to a return code when it is a parameter-, |
| // handle-, or session-related error. This is an implementation choice and the same result can be achieved |
| // by using a macro. |
| // |
| extern const UINT16 g_rcIndex[15]; |
| // |
| // |
| // g_exclusiveAuditSession |
| // |
| // This location holds the session handle for the current exclusive audit session. If there is no exclusive |
| // audit session, the location is set to TPM_RH_UNASSIGNED. |
| // |
| extern TPM_HANDLE g_exclusiveAuditSession; |
| // |
| // |
| // g_time |
| // |
| // This value is the count of milliseconds since the TPM was powered up. This value is initialized at |
| // _TPM_Init(). |
| // |
| extern UINT64 g_time; |
| // |
| // |
| // g_phEnable |
| // |
| // This is the platform hierarchy control and determines if the platform hierarchy is available. This value is |
| // SET on each TPM2_Startup(). The default value is SET. |
| // |
| extern BOOL g_phEnable; |
| // g_pceReConfig |
| // |
| // This value is SET if a TPM2_PCR_Allocate() command successfully executed since the last |
| // TPM2_Startup(). If so, then the next shutdown is required to be Shutdown(CLEAR). |
| // |
| extern BOOL g_pcrReConfig; |
| // |
| // |
| // g_DRTMHandle |
| // |
| // This location indicates the sequence object handle that holds the DRTM sequence data. When not used, |
| // it is set to TPM_RH_UNASSIGNED. A sequence DRTM sequence is started on either _TPM_Init() or |
| // _TPM_Hash_Start(). |
| // |
| extern TPMI_DH_OBJECT g_DRTMHandle; |
| // |
| // |
| // g_DrtmPreStartup |
| // |
| // This value indicates that an H-CRTM occurred after _TPM_Init() but before TPM2_Startup(). The define |
| // for PRE_STARTUP_FLAG is used to add the g_DrtmPreStartup value to gp_orderlyState at shutdown. |
| // This hack is to avoid adding another NV variable. |
| // |
| extern BOOL g_DrtmPreStartup; |
| #define PRE_STARTUP_FLAG 0x8000 |
| // |
| // |
| // g_StartupLocality3 |
| // |
| // This value indicates that a TPM2_Startup() occured at locality 3. Otherwise, it at locality 0. The define for |
| // STARTUP_LOCALITY_3 is to indicate that the startup was not at locality 0. This hack is to avoid adding |
| // another NV variable. |
| // |
| extern BOOL g_StartupLocality3; |
| #define STARTUP_LOCALITY_3 0x4000 |
| // |
| // |
| // g_updateNV |
| // |
| // This flag indicates if NV should be updated at the end of a command. This flag is set to FALSE at the |
| // beginning of each command in ExecuteCommand(). This flag is checked in ExecuteCommand() after the |
| // detailed actions of a command complete. If the command execution was successful and this flag is SET, |
| // any pending NV writes will be committed to NV. |
| // |
| extern BOOL g_updateNV; |
| // |
| // |
| // g_clearOrderly |
| // |
| // This flag indicates if the execution of a command should cause the orderly state to be cleared. This flag |
| // is set to FALSE at the beginning of each command in ExecuteCommand() and is checked in |
| // ExecuteCommand() after the detailed actions of a command complete but before the check of |
| // g_updateNV. If this flag is TRUE, and the orderly state is not SHUTDOWN_NONE, then the orderly state |
| // in NV memory will be changed to SHUTDOWN_NONE. |
| // |
| extern BOOL g_clearOrderly; |
| // |
| // |
| // |
| // g_prevOrderlyState |
| // |
| // This location indicates how the TPM was shut down before the most recent TPM2_Startup(). This value, |
| // along with the startup type, determines if the TPM should do a TPM Reset, TPM Restart, or TPM |
| // Resume. |
| // |
| extern TPM_SU g_prevOrderlyState; |
| // |
| // |
| // g_nvOk |
| // |
| // This value indicates if the NV integrity check was successful or not. If not and the failure was severe, then |
| // the TPM would have been put into failure mode after it had been re-manufactured. If the NV failure was in |
| // the area where the state-save data is kept, then this variable will have a value of FALSE indicating that a |
| // TPM2_Startup(CLEAR) is required. |
| // |
| extern BOOL g_nvOk; |
| // |
| // |
| // g_platformUnique |
| // |
| // This location contains the unique value(s) used to identify the TPM. It is loaded on every |
| // _TPM2_Startup() The first value is used to seed the RNG. The second value is used as a vendor |
| // authValue. The value used by the RNG would be the value derived from the chip unique value (such as |
| // fused) with a dependency on the authorities of the code in the TPM boot path. The second would be |
| // derived from the chip unique value with a dependency on the details of the code in the boot path. That is, |
| // the first value depends on the various signers of the code and the second depends on what was signed. |
| // The TPM vendor should not be able to know the first value but they are expected to know the second. |
| // |
| extern TPM2B_AUTH g_platformUniqueAuthorities; // Reserved for RNG |
| extern TPM2B_AUTH g_platformUniqueDetails; // referenced by VENDOR_PERMANENT |
| // |
| // |
| // Persistent Global Values |
| // |
| // Description |
| // |
| // The values in this section are global values that are persistent across power events. The lifetime of the |
| // values determines the structure in which the value is placed. |
| // |
| // PERSISTENT_DATA |
| // |
| // This structure holds the persistent values that only change as a consequence of a specific Protected |
| // Capability and are not affected by TPM power events (TPM2_Startup() or TPM2_Shutdown(). |
| // |
| typedef struct |
| { |
| //********************************************************************************* |
| // Hierarchy |
| //********************************************************************************* |
| // The values in this section are related to the hierarchies. |
| BOOL disableClear; // TRUE if TPM2_Clear() using |
| // lockoutAuth is disabled |
| // Hierarchy authPolicies |
| TPMI_ALG_HASH ownerAlg; |
| TPMI_ALG_HASH endorsementAlg; |
| TPMI_ALG_HASH lockoutAlg; |
| TPM2B_DIGEST ownerPolicy; |
| TPM2B_DIGEST endorsementPolicy; |
| TPM2B_DIGEST lockoutPolicy; |
| // Hierarchy authValues |
| TPM2B_AUTH ownerAuth; |
| TPM2B_AUTH endorsementAuth; |
| TPM2B_AUTH lockoutAuth; |
| // Primary Seeds |
| TPM2B_SEED EPSeed; |
| TPM2B_SEED SPSeed; |
| TPM2B_SEED PPSeed; |
| // Note there is a nullSeed in the state_reset memory. |
| // Hierarchy proofs |
| TPM2B_AUTH phProof; |
| TPM2B_AUTH shProof; |
| TPM2B_AUTH ehProof; |
| // Note there is a nullProof in the state_reset memory. |
| //********************************************************************************* |
| // Reset Events |
| //********************************************************************************* |
| // A count that increments at each TPM reset and never get reset during the life |
| // time of TPM. The value of this counter is initialized to 1 during TPM |
| // manufacture process. |
| UINT64 totalResetCount; |
| // This counter increments on each TPM Reset. The counter is reset by |
| // TPM2_Clear(). |
| UINT32 resetCount; |
| //********************************************************************************* |
| // PCR |
| //********************************************************************************* |
| // This structure hold the policies for those PCR that have an update policy. |
| // This implementation only supports a single group of PCR controlled by |
| // policy. If more are required, then this structure would be changed to |
| // an array. |
| PCR_POLICY pcrPolicies; |
| // This structure indicates the allocation of PCR. The structure contains a |
| // list of PCR allocations for each implemented algorithm. If no PCR are |
| // allocated for an algorithm, a list entry still exists but the bit map |
| // will contain no SET bits. |
| TPML_PCR_SELECTION pcrAllocated; |
| //********************************************************************************* |
| // Physical Presence |
| //********************************************************************************* |
| // The PP_LIST type contains a bit map of the commands that require physical |
| // to be asserted when the authorization is evaluated. Physical presence will be |
| // checked if the corresponding bit in the array is SET and if the authorization |
| // handle is TPM_RH_PLATFORM. |
| // |
| // These bits may be changed with TPM2_PP_Commands(). |
| BYTE ppList[((TPM_CC_PP_LAST - TPM_CC_PP_FIRST + 1) + 7)/8]; |
| //********************************************************************************* |
| // Dictionary attack values |
| //********************************************************************************* |
| // These values are used for dictionary attack tracking and control. |
| UINT32 failedTries; // the current count of unexpired |
| // authorization failures |
| UINT32 maxTries; // number of unexpired authorization |
| // failures before the TPM is in |
| // lockout |
| UINT32 recoveryTime; // time between authorization failures |
| // before failedTries is decremented |
| UINT32 lockoutRecovery; // time that must expire between |
| // authorization failures associated |
| // with lockoutAuth |
| BOOL lockOutAuthEnabled; // TRUE if use of lockoutAuth is |
| // allowed |
| //***************************************************************************** |
| // Orderly State |
| //***************************************************************************** |
| // The orderly state for current cycle |
| TPM_SU orderlyState; |
| //***************************************************************************** |
| // Command audit values. |
| //***************************************************************************** |
| BYTE auditComands[((TPM_CC_LAST - TPM_CC_FIRST + 1) + 7) / 8]; |
| TPMI_ALG_HASH auditHashAlg; |
| UINT64 auditCounter; |
| //***************************************************************************** |
| // Algorithm selection |
| //***************************************************************************** |
| // |
| // The 'algorithmSet' value indicates the collection of algorithms that are |
| // currently in used on the TPM. The interpretation of value is vendor dependent. |
| UINT32 algorithmSet; |
| //***************************************************************************** |
| // Firmware version |
| //***************************************************************************** |
| // The firmwareV1 and firmwareV2 values are instanced in TimeStamp.c. This is |
| // a scheme used in development to allow determination of the linker build time |
| // of the TPM. An actual implementation would implement these values in a way that |
| // is consistent with vendor needs. The values are maintained in RAM for simplified |
| // access with a master version in NV. These values are modified in a |
| // vendor-specific way. |
| // g_firmwareV1 contains the more significant 32-bits of the vendor version number. |
| // In the reference implementation, if this value is printed as a hex |
| // value, it will have the format of yyyymmdd |
| UINT32 firmwareV1; |
| // g_firmwareV1 contains the less significant 32-bits of the vendor version number. |
| // In the reference implementation, if this value is printed as a hex |
| // value, it will have the format of 00 hh mm ss |
| UINT32 firmwareV2; |
| } PERSISTENT_DATA; |
| extern PERSISTENT_DATA gp; |
| // |
| // |
| // ORDERLY_DATA |
| // |
| // The data in this structure is saved to NV on each TPM2_Shutdown(). |
| // |
| typedef struct orderly_data |
| { |
| // |
| //***************************************************************************** |
| // TIME |
| //***************************************************************************** |
| // Clock has two parts. One is the state save part and one is the NV part. The |
| // state save version is updated on each command. When the clock rolls over, the |
| // NV version is updated. When the TPM starts up, if the TPM was shutdown in and |
| // orderly way, then the sClock value is used to initialize the clock. If the |
| // TPM shutdown was not orderly, then the persistent value is used and the safe |
| // attribute is clear. |
| UINT64 clock; // The orderly version of clock |
| TPMI_YES_NO clockSafe; // Indicates if the clock value is |
| // safe. |
| //********************************************************************************* |
| // DRBG |
| //********************************************************************************* |
| #ifdef _DRBG_STATE_SAVE |
| // This is DRBG state data. This is saved each time the value of clock is |
| // updated. |
| DRBG_STATE drbgState; |
| #endif |
| } ORDERLY_DATA; |
| extern ORDERLY_DATA go; |
| // |
| // |
| // STATE_CLEAR_DATA |
| // |
| // This structure contains the data that is saved on Shutdown(STATE). and restored on Startup(STATE). |
| // The values are set to their default settings on any Startup(Clear). In other words the data is only |
| // persistent across TPM Resume. |
| // If the comments associated with a parameter indicate a default reset value, the value is applied on each |
| // Startup(CLEAR). |
| // |
| typedef struct state_clear_data |
| { |
| //***************************************************************************** |
| // Hierarchy Control |
| //***************************************************************************** |
| BOOL shEnable; // default reset is SET |
| BOOL ehEnable; // default reset is SET |
| BOOL phEnableNV; // default reset is SET |
| TPMI_ALG_HASH platformAlg; // default reset is TPM_ALG_NULL |
| TPM2B_DIGEST platformPolicy; // default reset is an Empty Buffer |
| TPM2B_AUTH platformAuth; // default reset is an Empty Buffer |
| //***************************************************************************** |
| // PCR |
| //***************************************************************************** |
| // The set of PCR to be saved on Shutdown(STATE) |
| PCR_SAVE pcrSave; // default reset is 0...0 |
| // This structure hold the authorization values for those PCR that have an |
| // update authorization. |
| // This implementation only supports a single group of PCR controlled by |
| // authorization. If more are required, then this structure would be changed to |
| // an array. |
| PCR_AUTHVALUE pcrAuthValues; |
| } STATE_CLEAR_DATA; |
| extern STATE_CLEAR_DATA gc; |
| // |
| // |
| // |
| // State Reset Data |
| // |
| // This structure contains data is that is saved on Shutdown(STATE) and restored on the subsequent |
| // Startup(ANY). That is, the data is preserved across TPM Resume and TPM Restart. |
| // If a default value is specified in the comments this value is applied on TPM Reset. |
| // |
| typedef struct state_reset_data |
| { |
| //***************************************************************************** |
| // Hierarchy Control |
| //***************************************************************************** |
| TPM2B_AUTH nullProof; // The proof value associated with |
| // the TPM_RH_NULL hierarchy. The |
| // default reset value is from the RNG. |
| TPM2B_SEED nullSeed; // The seed value for the TPM_RN_NULL |
| // hierarchy. The default reset value |
| // is from the RNG. |
| //***************************************************************************** |
| // Context |
| //***************************************************************************** |
| // The 'clearCount' counter is incremented each time the TPM successfully executes |
| // a TPM Resume. The counter is included in each saved context that has 'stClear' |
| // SET (including descendants of keys that have 'stClear' SET). This prevents these |
| // objects from being loaded after a TPM Resume. |
| // If 'clearCount' at its maximum value when the TPM receives a Shutdown(STATE), |
| // the TPM will return TPM_RC_RANGE and the TPM will only accept Shutdown(CLEAR). |
| UINT32 clearCount; // The default reset value is 0. |
| UINT64 objectContextID; // This is the context ID for a saved |
| // object context. The default reset |
| // value is 0. |
| CONTEXT_SLOT contextArray[MAX_ACTIVE_SESSIONS]; |
| // This is the value from which the |
| // 'contextID' is derived. The |
| // default reset value is {0}. |
| CONTEXT_COUNTER contextCounter; // This array contains contains the |
| // values used to track the version |
| // numbers of saved contexts (see |
| // Session.c in for details). The |
| // default reset value is 0. |
| //***************************************************************************** |
| // Command Audit |
| //***************************************************************************** |
| // When an audited command completes, ExecuteCommand() checks the return |
| // value. If it is TPM_RC_SUCCESS, and the command is an audited command, the |
| // TPM will extend the cpHash and rpHash for the command to this value. If this |
| // digest was the Zero Digest before the cpHash was extended, the audit counter |
| // is incremented. |
| TPM2B_DIGEST commandAuditDigest; // This value is set to an Empty Digest |
| // by TPM2_GetCommandAuditDigest() or a |
| // TPM Reset. |
| //***************************************************************************** |
| // Boot counter |
| //***************************************************************************** |
| UINT32 restartCount; // This counter counts TPM Restarts. |
| // The default reset value is 0. |
| // |
| //********************************************************************************* |
| // PCR |
| //********************************************************************************* |
| // This counter increments whenever the PCR are updated. This counter is preserved |
| // across TPM Resume even though the PCR are not preserved. This is because |
| // sessions remain active across TPM Restart and the count value in the session |
| // is compared to this counter so this counter must have values that are unique |
| // as long as the sessions are active. |
| // NOTE: A platform-specific specification may designate that certain PCR changes |
| // do not increment this counter to increment. |
| UINT32 pcrCounter; // The default reset value is 0. |
| #ifdef TPM_ALG_ECC |
| //***************************************************************************** |
| // ECDAA |
| //***************************************************************************** |
| UINT64 commitCounter; // This counter increments each time |
| // TPM2_Commit() returns |
| // TPM_RC_SUCCESS. The default reset |
| // value is 0. |
| TPM2B_NONCE commitNonce; // This random value is used to compute |
| // the commit values. The default reset |
| // value is from the RNG. |
| // This implementation relies on the number of bits in g_commitArray being a |
| // power of 2 (8, 16, 32, 64, etc.) and no greater than 64K. |
| BYTE commitArray[16]; // The default reset value is {0}. |
| #endif //TPM_ALG_ECC |
| } STATE_RESET_DATA; |
| extern STATE_RESET_DATA gr; |
| // |
| // |
| // Global Macro Definitions |
| // |
| // This macro is used to ensure that a handle, session, or parameter number is only added if the response |
| // code is FMT1. |
| // |
| #define RcSafeAddToResult(r, v) \ |
| ((r) + (((r) & RC_FMT1) ? (v) : 0)) |
| // |
| // This macro is used when a parameter is not otherwise referenced in a function. This macro is normally |
| // not used by itself but is paired with a pAssert() within a #ifdef pAssert. If pAssert is not defined, then a |
| // parameter might not otherwise be referenced. This macro uses the parameter from the perspective of the |
| // compiler so it doesn't complain. |
| // |
| #define UNREFERENCED(a) ((void)(a)) |
| // |
| // |
| // Private data |
| // |
| #if defined SESSION_PROCESS_C || defined GLOBAL_C || defined MANUFACTURE_C |
| // |
| // From SessionProcess.c |
| // The following arrays are used to save command sessions information so that the command |
| // handle/session buffer does not have to be preserved for the duration of the command. These arrays are |
| // indexed by the session index in accordance with the order of sessions in the session area of the |
| // command. |
| // |
| // Array of the authorization session handles |
| // |
| extern TPM_HANDLE s_sessionHandles[MAX_SESSION_NUM]; |
| // |
| // Array of authorization session attributes |
| // |
| extern TPMA_SESSION s_attributes[MAX_SESSION_NUM]; |
| // |
| // Array of handles authorized by the corresponding authorization sessions; and if none, then |
| // TPM_RH_UNASSIGNED value is used |
| // |
| extern TPM_HANDLE s_associatedHandles[MAX_SESSION_NUM]; |
| // |
| // Array of nonces provided by the caller for the corresponding sessions |
| // |
| extern TPM2B_NONCE s_nonceCaller[MAX_SESSION_NUM]; |
| // |
| // Array of authorization values (HMAC's or passwords) for the corresponding sessions |
| // |
| extern TPM2B_AUTH s_inputAuthValues[MAX_SESSION_NUM]; |
| // |
| // Special value to indicate an undefined session index |
| // |
| #define UNDEFINED_INDEX (0xFFFF) |
| // |
| // Index of the session used for encryption of a response parameter |
| // |
| extern UINT32 s_encryptSessionIndex; |
| // |
| // Index of the session used for decryption of a command parameter |
| // |
| extern UINT32 s_decryptSessionIndex; |
| // |
| // Index of a session used for audit |
| // |
| extern UINT32 s_auditSessionIndex; |
| // |
| // The cpHash for an audit session |
| // |
| extern TPM2B_DIGEST s_cpHashForAudit; |
| // |
| // The cpHash for command audit |
| // |
| #ifdef TPM_CC_GetCommandAuditDigest |
| extern TPM2B_DIGEST s_cpHashForCommandAudit; |
| #endif |
| // |
| // Number of authorization sessions present in the command |
| // |
| extern UINT32 s_sessionNum; |
| // |
| // Flag indicating if NV update is pending for the lockOutAuthEnabled or failedTries DA parameter |
| // |
| extern BOOL s_DAPendingOnNV; |
| #endif // SESSION_PROCESS_C |
| #if defined DA_C || defined GLOBAL_C || defined MANUFACTURE_C |
| // |
| // From DA.c |
| // |
| // This variable holds the accumulated time since the last time that failedTries was decremented. This value |
| // is in millisecond. |
| // |
| extern UINT64 s_selfHealTimer; |
| // |
| // This variable holds the accumulated time that the lockoutAuth has been blocked. |
| // |
| extern UINT64 s_lockoutTimer; |
| #endif // DA_C |
| #if defined NV_C || defined GLOBAL_C |
| // |
| // From NV.c |
| // List of pre-defined address of reserved data |
| // |
| extern UINT32 s_reservedAddr[NV_RESERVE_LAST]; |
| // |
| // List of pre-defined reserved data size in byte |
| // |
| extern UINT32 s_reservedSize[NV_RESERVE_LAST]; |
| // |
| // Size of data in RAM index buffer |
| // |
| extern UINT32 s_ramIndexSize; |
| // |
| // Reserved RAM space for frequently updated NV Index. The data layout in ram buffer is {NV_handle(), |
| // size of data, data} for each NV index data stored in RAM |
| // |
| extern BYTE s_ramIndex[RAM_INDEX_SPACE]; |
| // |
| // Address of size of RAM index space in NV |
| // |
| extern UINT32 s_ramIndexSizeAddr; |
| // |
| // Address of NV copy of RAM index space |
| // |
| extern UINT32 s_ramIndexAddr; |
| // |
| // Address of maximum counter value; an auxiliary variable to implement NV counters |
| // |
| extern UINT32 s_maxCountAddr; |
| // |
| // Beginning of NV dynamic area; starts right after the s_maxCountAddr and s_evictHandleMapAddr |
| // variables |
| // |
| extern UINT32 s_evictNvStart; |
| // |
| // Beginning of NV dynamic area; also the beginning of the predefined reserved data area. |
| // |
| extern UINT32 s_evictNvEnd; |
| // |
| // NV availability is sampled as the start of each command and stored here so that its value remains |
| // consistent during the command execution |
| // |
| extern TPM_RC s_NvStatus; |
| #endif |
| #if defined OBJECT_C || defined GLOBAL_C |
| // |
| // From Object.c |
| // |
| // This type is the container for an object. |
| // |
| typedef struct |
| { |
| BOOL occupied; |
| ANY_OBJECT object; |
| } OBJECT_SLOT; |
| // |
| // This is the memory that holds the loaded objects. |
| // |
| extern OBJECT_SLOT s_objects[MAX_LOADED_OBJECTS]; |
| #endif // OBJECT_C |
| #if defined PCR_C || defined GLOBAL_C |
| // |
| // From PCR.c |
| // |
| typedef struct |
| { |
| #ifdef TPM_ALG_SHA1 |
| // SHA1 PCR |
| BYTE sha1Pcr[SHA1_DIGEST_SIZE]; |
| #endif |
| #ifdef TPM_ALG_SHA256 |
| // SHA256 PCR |
| BYTE sha256Pcr[SHA256_DIGEST_SIZE]; |
| #endif |
| #ifdef TPM_ALG_SHA384 |
| // SHA384 PCR |
| BYTE sha384Pcr[SHA384_DIGEST_SIZE]; |
| #endif |
| #ifdef TPM_ALG_SHA512 |
| // SHA512 PCR |
| BYTE sha512Pcr[SHA512_DIGEST_SIZE]; |
| #endif |
| #ifdef TPM_ALG_SM3_256 |
| // SHA256 PCR |
| BYTE sm3_256Pcr[SM3_256_DIGEST_SIZE]; |
| #endif |
| } PCR; |
| typedef struct |
| { |
| unsigned int stateSave : 1; // if the PCR value should be |
| // saved in state save |
| unsigned int resetLocality : 5; // The locality that the PCR |
| // can be reset |
| unsigned int extendLocality : 5; // The locality that the PCR |
| // can be extend |
| } PCR_Attributes; |
| extern PCR s_pcrs[IMPLEMENTATION_PCR]; |
| #endif // PCR_C |
| #if defined SESSION_C || defined GLOBAL_C |
| // |
| // From Session.c |
| // Container for HMAC or policy session tracking information |
| // |
| typedef struct |
| { |
| BOOL occupied; |
| SESSION session; // session structure |
| } SESSION_SLOT; |
| extern SESSION_SLOT s_sessions[MAX_LOADED_SESSIONS]; |
| // |
| // |
| // |
| // |
| // The index in conextArray that has the value of the oldest saved session context. When no context is |
| // saved, this will have a value that is greater than or equal to MAX_ACTIVE_SESSIONS. |
| // |
| extern UINT32 s_oldestSavedSession; |
| // |
| // The number of available session slot openings. When this is 1, a session can't be created or loaded if the |
| // GAP is maxed out. The exception is that the oldest saved session context can always be loaded |
| // (assuming that there is a space in memory to put it) |
| // |
| extern int s_freeSessionSlots; |
| #endif // SESSION_C |
| // |
| // From Manufacture.c |
| // |
| extern BOOL g_manufactured; |
| #if defined POWER_C || defined GLOBAL_C |
| // |
| // From Power.c |
| // This value indicates if a TPM2_Startup() commands has been receive since the power on event. This |
| // flag is maintained in power simulation module because this is the only place that may reliably set this flag |
| // to FALSE. |
| // |
| extern BOOL s_initialized; |
| #endif // POWER_C |
| #if defined MEMORY_LIB_C || defined GLOBAL_C |
| // |
| // The s_actionOutputBuffer should not be modifiable by the host system until the TPM has returned a |
| // response code. The s_actionOutputBuffer should not be accessible until response parameter encryption, |
| // if any, is complete. |
| // |
| extern UINT32 s_actionInputBuffer[1024]; // action input buffer |
| extern UINT32 s_actionOutputBuffer[1024]; // action output buffer |
| extern BYTE s_responseBuffer[MAX_RESPONSE_SIZE];// response buffer |
| #endif // MEMORY_LIB_C |
| // |
| // From TPMFail.c |
| // This value holds the address of the string containing the name of the function in which the failure |
| // occurred. This address value isn't useful for anything other than helping the vendor to know in which file |
| // the failure occurred. |
| // |
| extern jmp_buf g_jumpBuffer; // the jump buffer |
| extern BOOL g_inFailureMode; // Indicates that the TPM is in failure mode |
| extern BOOL g_forceFailureMode; // flag to force failure mode during test |
| #if defined TPM_FAIL_C || defined GLOBAL_C || 1 |
| extern UINT32 s_failFunction; |
| extern UINT32 s_failLine; // the line in the file at which |
| // the error was signaled |
| extern UINT32 s_failCode; // the error code used |
| #endif // TPM_FAIL_C |
| #endif // GLOBAL_H |