blob: a81d452194d5ee1e8fb77f8b99c8a66143ab5215 [file] [log] [blame]
David Purdy1d0f5fa2012-03-27 16:01:09 +00001/*
2 * Copyright (C) 2012
3 * David Purdy <david.c.purdy@gmail.com>
4 *
5 * Based on Kirkwood support:
6 * (C) Copyright 2009
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
9 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020010 * SPDX-License-Identifier: GPL-2.0+
David Purdy1d0f5fa2012-03-27 16:01:09 +000011 */
12
13#ifndef _CONFIG_POGO_E02_H
14#define _CONFIG_POGO_E02_H
15
16/*
17 * Machine type definition and ID
18 */
19#define MACH_TYPE_POGO_E02 3542
20#define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02
21#define CONFIG_IDENT_STRING "\nPogo E02"
22
23/*
24 * High Level Configuration Options (easy to change)
25 */
26#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
27#define CONFIG_KIRKWOOD /* SOC Family Name */
28#define CONFIG_KW88F6281 /* SOC Name */
29#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
30
31/*
32 * Commands configuration
33 */
34#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
35#define CONFIG_SYS_MVFS
36#include <config_cmd_default.h>
37#define CONFIG_CMD_DHCP
38#define CONFIG_CMD_ENV
39#define CONFIG_CMD_MII
40#define CONFIG_CMD_NAND
41#define CONFIG_CMD_PING
42#define CONFIG_CMD_USB
43
44/*
45 * mv-common.h should be defined after CMD configs since it used them
46 * to enable certain macros
47 */
48#include "mv-common.h"
49
50/* Remove or override few declarations from mv-common.h */
51#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */
52#define CONFIG_SYS_PROMPT "PogoE02> "
53
54/*
55 * Environment variables configurations
56 */
57#ifdef CONFIG_CMD_NAND
58#define CONFIG_ENV_IS_IN_NAND
59#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
60#else
61#define CONFIG_ENV_IS_NOWHERE
62#endif
63
64#define CONFIG_ENV_SIZE 0x20000 /* 128k */
65#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
66
67/*
68 * Default environment variables
69 */
70#define CONFIG_BOOTCOMMAND \
71 "setenv bootargs $(bootargs_console); " \
72 "run bootcmd_usb; " \
73 "bootm 0x00800000 0x01100000"
74
75#define CONFIG_EXTRA_ENV_SETTINGS \
76 "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
77 "32M(rootfs),-(data)\0"\
78 "mtdids=nand0=orion_nand\0"\
79 "bootargs_console=console=ttyS0,115200\0" \
80 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
81 "ext2load usb 0:1 0x01100000 /uInitrd\0"
82
83/*
84 * Ethernet Driver configuration
85 */
86#ifdef CONFIG_CMD_NET
87#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
88#define CONFIG_PHY_BASE_ADR 0
89#endif /* CONFIG_CMD_NET */
90
91/*
92 * File system
93 */
94#define CONFIG_CMD_EXT2
95#define CONFIG_CMD_FAT
96#define CONFIG_CMD_JFFS2
97#define CONFIG_CMD_UBI
98#define CONFIG_CMD_UBIFS
99#define CONFIG_RBTREE
100#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
101#define CONFIG_MTD_PARTITIONS
102#define CONFIG_CMD_MTDPARTS
103#define CONFIG_LZO
104
105#endif /* _CONFIG_POGO_E02_H */