blob: b66fd6cb8acab0e01d39ee53cd62d391f6332e2b [file] [log] [blame]
Troy Kiskyabbab702012-10-22 15:19:01 +00001Watchdog driver general info
2
3CONFIG_HW_WATCHDOG
4 This enables hw_watchdog_reset to be called during various loops,
5 including waiting for a character on a serial port. But it
6 does not also call hw_watchdog_init. Boards which want this
7 enabled must call this function in their board file. This split
8 is useful because some rom's enable the watchdog when downloading
9 new code, so it must be serviced, but the board would rather it
10 was off. And, it cannot always be turned off once on.
11
12CONFIG_WATCHDOG_TIMEOUT_MSECS
13 Can be used to change the timeout for i.mx31/35/5x/6x.
14 If not given, will default to maximum timeout. This would
15 be 128000 msec for i.mx31/35/5x/6x.
16
17CONFIG_AT91SAM9_WATCHDOG
18 Available for AT91SAM9 to service the watchdog.
19
20CONFIG_FTWDT010_WATCHDOG
21 Available for FTWDT010 to service the watchdog.
22
23CONFIG_FTWDT010_HW_TIMEOUT
24 Can be used to change the timeout for FTWDT010.
25
26CONFIG_IMX_WATCHDOG
27 Available for i.mx31/35/5x/6x to service the watchdog. This is not
28 automatically set because some boards (vision2) still need to define
29 their own hw_watchdog_reset routine.
Simon Glassbee2b992015-08-30 19:19:31 -060030 TODO: vision2 is removed now, so perhaps this can be changed.
Michal Simek0f21f982013-04-22 11:23:16 +020031
32CONFIG_XILINX_TB_WATCHDOG
33 Available for Xilinx Axi platforms to service timebase watchdog timer.
Sonic Zhange9a389a2013-04-07 18:02:37 +080034
35CONFIG_BFIN_WATCHDOG
36 Available for bf5xx and bf6xx to service the watchdog.