blob: 9036ce34186ea0219f45bf416100dd1cd28668bf [file] [log] [blame]
Mike Frysinger9417d9a2008-10-12 21:49:28 -04001/*
2 * U-boot - Configuration file for TCM-BF537 board
3 */
4
5#ifndef __CONFIG_TCM_BF537_H__
6#define __CONFIG_TCM_BF537_H__
7
Mike Frysingerf348ab82009-04-24 17:22:40 -04008#include <asm/config-pre.h>
Mike Frysinger9417d9a2008-10-12 21:49:28 -04009
10
11/*
12 * Processor Settings
13 */
Mike Frysinger9417d9a2008-10-12 21:49:28 -040014#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
15
16
17/*
18 * Clock Settings
19 * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
20 * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
21 */
22/* CONFIG_CLKIN_HZ is any value in Hz */
23#define CONFIG_CLKIN_HZ 25000000
24/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
25/* 1 = CLKIN / 2 */
26#define CONFIG_CLKIN_HALF 0
27/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
28/* 1 = bypass PLL */
29#define CONFIG_PLL_BYPASS 0
30/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
31/* Values can range from 0-63 (where 0 means 64) */
32#define CONFIG_VCO_MULT 21
33/* CCLK_DIV controls the core clock divider */
34/* Values can be 1, 2, 4, or 8 ONLY */
35#define CONFIG_CCLK_DIV 1
36/* SCLK_DIV controls the system clock divider */
37/* Values can range from 1-15 */
38#define CONFIG_SCLK_DIV 4
39
Harald Krapfenbauerfd04a052009-10-14 08:37:32 -040040/* Decrease core voltage */
41#define CONFIG_VR_CTL_VAL (VLEV_115 | CLKBUFOE | GAIN_20 | FREQ_1000)
42
Mike Frysinger9417d9a2008-10-12 21:49:28 -040043
44/*
45 * Memory Settings
46 */
47#define CONFIG_MEM_ADD_WDTH 9
48#define CONFIG_MEM_SIZE 32
49
50#define CONFIG_EBIU_SDRRC_VAL 0x3f8
51#define CONFIG_EBIU_SDGCTL_VAL 0x9111cd
52
53#define CONFIG_EBIU_AMGCTL_VAL (AMBEN_ALL)
54#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
55#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
56
57#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
58#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
59
60
61/*
62 * Network Settings
63 */
64/* TCM-BF537E has no PHY on it, but EXT-BF5xx-USB/Ethernet board has */
65#ifndef __ADSPBF534__
66#define ADI_CMDS_NETWORK 1
67#define CONFIG_BFIN_MAC
68#define CONFIG_NETCONSOLE 1
69#define CONFIG_NET_MULTI 1
70#endif
71#define CONFIG_HOSTNAME tcm-bf537
72/* Uncomment next line to use fixed MAC address */
73/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */
74
75
76/*
77 * Flash Settings
78 */
79#define CONFIG_FLASH_CFI_DRIVER
80#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
81#define CONFIG_SYS_FLASH_BASE 0x20000000
82#define CONFIG_SYS_FLASH_CFI
83#define CONFIG_SYS_FLASH_PROTECTION
84#define CONFIG_SYS_MAX_FLASH_BANKS 1
85#define CONFIG_SYS_MAX_FLASH_SECT 67
86
87
88/*
89 * Env Storage Settings
90 */
91#define CONFIG_ENV_IS_IN_FLASH 1
92#define CONFIG_ENV_OFFSET 0x4000
93#define CONFIG_ENV_SIZE 0x2000
94#define CONFIG_ENV_SECT_SIZE 0x20000
95#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
96#define ENV_IS_EMBEDDED
97#else
Mike Frysinger76d82182009-07-21 22:17:36 -040098#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
Mike Frysinger9417d9a2008-10-12 21:49:28 -040099#endif
Mike Frysinger9ff67e52009-06-14 06:29:07 -0400100#ifdef ENV_IS_EMBEDDED
101/* WARNING - the following is hand-optimized to fit within
102 * the sector before the environment sector. If it throws
103 * an error during compilation remove an object here to get
104 * it linked after the configuration sector.
105 */
106# define LDS_BOARD_TEXT \
Mike Frysingerc70e7dd2010-11-19 19:28:56 -0500107 arch/blackfin/lib/libblackfin.o (.text*); \
108 arch/blackfin/cpu/libblackfin.o (.text*); \
Mike Frysinger9ff67e52009-06-14 06:29:07 -0400109 . = DEFINED(env_offset) ? env_offset : .; \
Mike Frysingerc70e7dd2010-11-19 19:28:56 -0500110 common/env_embedded.o (.text*);
Mike Frysinger9ff67e52009-06-14 06:29:07 -0400111#endif
Mike Frysinger9417d9a2008-10-12 21:49:28 -0400112
113
114/*
115 * I2C Settings
116 */
117#define CONFIG_BFIN_TWI_I2C 1
118#define CONFIG_HARD_I2C 1
Mike Frysinger9417d9a2008-10-12 21:49:28 -0400119
120
121/*
122 * Misc Settings
123 */
124#define CONFIG_BAUDRATE 115200
125#define CONFIG_MISC_INIT_R
126#define CONFIG_RTC_BFIN
127#define CONFIG_UART_CONSOLE 0
Harald Krapfenbauerfd04a052009-10-14 08:37:32 -0400128#define CONFIG_BOOTCOMMAND "run flashboot"
129#define FLASHBOOT_ENV_SETTINGS \
130 "flashboot=flread 20040000 1000000 280000;" \
131 "bootm 0x1000000\0"
Mike Frysinger9417d9a2008-10-12 21:49:28 -0400132
133
134/*
135 * Pull in common ADI header for remaining command/environment setup
136 */
137#include <configs/bfin_adi_common.h>
138
Mike Frysinger9417d9a2008-10-12 21:49:28 -0400139
140#endif