| // This benchmark is basically bzip2 (mashed to be a single file) |
| // compressing and decompressing some data. It tests Valgrind's handling of |
| // realistic and "difficult" (ie. lots of branches and memory accesses) |
| // integer code. Execution is spread out over quite a few basic blocks; |
| // --profile-flags indicates that to get to the top 90%th percentile of |
| // dynamic BB counts requires considering the top 51 basic blocks |
| |
| // This program can be used both as part of the performance test |
| // suite, in which case we want it to run for quite a while, |
| // and as part of the regression (correctness) test suite, in |
| // which case we want it to run quickly and be verbose. |
| // So it does the latter iff given a command line arg. |
| |
| // Licensing: the code within is mostly taken from bzip2, which has a BSD |
| // license. There is a little code from Vex, which is GPL for |
| // non-commercial use. And it's all written by Julian Seward. |
| |
| #define BZ_NO_STDIO |
| |
| |
| /*-------------------------------------------------------------*/ |
| /*--- Private header file for the library. ---*/ |
| /*--- bzlib_private.h ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| /*-- |
| This file is a part of bzip2 and/or libbzip2, a program and |
| library for lossless, block-sorting data compression. |
| |
| Copyright (C) 1996-2004 Julian R Seward. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| 1. Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| |
| 2. The origin of this software must not be misrepresented; you must |
| not claim that you wrote the original software. If you use this |
| software in a product, an acknowledgment in the product |
| documentation would be appreciated but is not required. |
| |
| 3. Altered source versions must be plainly marked as such, and must |
| not be misrepresented as being the original software. |
| |
| 4. The name of the author may not be used to endorse or promote |
| products derived from this software without specific prior written |
| permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS |
| OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| Julian Seward, Cambridge, UK. |
| jseward@bzip.org |
| bzip2/libbzip2 version 1.0 of 21 March 2000 |
| |
| This program is based on (at least) the work of: |
| Mike Burrows |
| David Wheeler |
| Peter Fenwick |
| Alistair Moffat |
| Radford Neal |
| Ian H. Witten |
| Robert Sedgewick |
| Jon L. Bentley |
| |
| For more information on these sources, see the manual. |
| --*/ |
| |
| |
| #ifndef _BZLIB_PRIVATE_H |
| #define _BZLIB_PRIVATE_H |
| |
| #include <stdlib.h> |
| |
| #ifndef BZ_NO_STDIO |
| #include <stdio.h> |
| #include <ctype.h> |
| #include <string.h> |
| #endif |
| |
| |
| /*-------------------------------------------------------------*/ |
| /*--- Public header file for the library. ---*/ |
| /*--- bzlib.h ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| /*-- |
| This file is a part of bzip2 and/or libbzip2, a program and |
| library for lossless, block-sorting data compression. |
| |
| Copyright (C) 1996-2004 Julian R Seward. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| 1. Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| |
| 2. The origin of this software must not be misrepresented; you must |
| not claim that you wrote the original software. If you use this |
| software in a product, an acknowledgment in the product |
| documentation would be appreciated but is not required. |
| |
| 3. Altered source versions must be plainly marked as such, and must |
| not be misrepresented as being the original software. |
| |
| 4. The name of the author may not be used to endorse or promote |
| products derived from this software without specific prior written |
| permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS |
| OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| Julian Seward, Cambridge, UK. |
| jseward@bzip.org |
| bzip2/libbzip2 version 1.0 of 21 March 2000 |
| |
| This program is based on (at least) the work of: |
| Mike Burrows |
| David Wheeler |
| Peter Fenwick |
| Alistair Moffat |
| Radford Neal |
| Ian H. Witten |
| Robert Sedgewick |
| Jon L. Bentley |
| |
| For more information on these sources, see the manual. |
| --*/ |
| |
| |
| #ifndef _BZLIB_H |
| #define _BZLIB_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #define BZ_RUN 0 |
| #define BZ_FLUSH 1 |
| #define BZ_FINISH 2 |
| |
| #define BZ_OK 0 |
| #define BZ_RUN_OK 1 |
| #define BZ_FLUSH_OK 2 |
| #define BZ_FINISH_OK 3 |
| #define BZ_STREAM_END 4 |
| #define BZ_SEQUENCE_ERROR (-1) |
| #define BZ_PARAM_ERROR (-2) |
| #define BZ_MEM_ERROR (-3) |
| #define BZ_DATA_ERROR (-4) |
| #define BZ_DATA_ERROR_MAGIC (-5) |
| #define BZ_IO_ERROR (-6) |
| #define BZ_UNEXPECTED_EOF (-7) |
| #define BZ_OUTBUFF_FULL (-8) |
| #define BZ_CONFIG_ERROR (-9) |
| |
| typedef |
| struct { |
| char *next_in; |
| unsigned int avail_in; |
| unsigned int total_in_lo32; |
| unsigned int total_in_hi32; |
| |
| char *next_out; |
| unsigned int avail_out; |
| unsigned int total_out_lo32; |
| unsigned int total_out_hi32; |
| |
| void *state; |
| |
| void *(*bzalloc)(void *,int,int); |
| void (*bzfree)(void *,void *); |
| void *opaque; |
| } |
| bz_stream; |
| |
| |
| #ifndef BZ_IMPORT |
| #define BZ_EXPORT |
| #endif |
| |
| #ifndef BZ_NO_STDIO |
| /* Need a definitition for FILE */ |
| #include <stdio.h> |
| #endif |
| |
| #ifdef _WIN32 |
| # include <windows.h> |
| # ifdef small |
| /* windows.h define small to char */ |
| # undef small |
| # endif |
| # ifdef BZ_EXPORT |
| # define BZ_API(func) WINAPI func |
| # define BZ_EXTERN extern |
| # else |
| /* import windows dll dynamically */ |
| # define BZ_API(func) (WINAPI * func) |
| # define BZ_EXTERN |
| # endif |
| #else |
| # define BZ_API(func) func |
| # define BZ_EXTERN extern |
| #endif |
| |
| |
| /*-- Core (low-level) library functions --*/ |
| |
| BZ_EXTERN int BZ_API(BZ2_bzCompressInit) ( |
| bz_stream* strm, |
| int blockSize100k, |
| int verbosity, |
| int workFactor |
| ); |
| |
| BZ_EXTERN int BZ_API(BZ2_bzCompress) ( |
| bz_stream* strm, |
| int action |
| ); |
| |
| BZ_EXTERN int BZ_API(BZ2_bzCompressEnd) ( |
| bz_stream* strm |
| ); |
| |
| BZ_EXTERN int BZ_API(BZ2_bzDecompressInit) ( |
| bz_stream *strm, |
| int verbosity, |
| int small |
| ); |
| |
| BZ_EXTERN int BZ_API(BZ2_bzDecompress) ( |
| bz_stream* strm |
| ); |
| |
| BZ_EXTERN int BZ_API(BZ2_bzDecompressEnd) ( |
| bz_stream *strm |
| ); |
| |
| |
| |
| /*-- High(er) level library functions --*/ |
| |
| #ifndef BZ_NO_STDIO |
| #define BZ_MAX_UNUSED 5000 |
| |
| typedef void BZFILE; |
| |
| BZ_EXTERN BZFILE* BZ_API(BZ2_bzReadOpen) ( |
| int* bzerror, |
| FILE* f, |
| int verbosity, |
| int small, |
| void* unused, |
| int nUnused |
| ); |
| |
| BZ_EXTERN void BZ_API(BZ2_bzReadClose) ( |
| int* bzerror, |
| BZFILE* b |
| ); |
| |
| BZ_EXTERN void BZ_API(BZ2_bzReadGetUnused) ( |
| int* bzerror, |
| BZFILE* b, |
| void** unused, |
| int* nUnused |
| ); |
| |
| BZ_EXTERN int BZ_API(BZ2_bzRead) ( |
| int* bzerror, |
| BZFILE* b, |
| void* buf, |
| int len |
| ); |
| |
| BZ_EXTERN BZFILE* BZ_API(BZ2_bzWriteOpen) ( |
| int* bzerror, |
| FILE* f, |
| int blockSize100k, |
| int verbosity, |
| int workFactor |
| ); |
| |
| BZ_EXTERN void BZ_API(BZ2_bzWrite) ( |
| int* bzerror, |
| BZFILE* b, |
| void* buf, |
| int len |
| ); |
| |
| BZ_EXTERN void BZ_API(BZ2_bzWriteClose) ( |
| int* bzerror, |
| BZFILE* b, |
| int abandon, |
| unsigned int* nbytes_in, |
| unsigned int* nbytes_out |
| ); |
| |
| BZ_EXTERN void BZ_API(BZ2_bzWriteClose64) ( |
| int* bzerror, |
| BZFILE* b, |
| int abandon, |
| unsigned int* nbytes_in_lo32, |
| unsigned int* nbytes_in_hi32, |
| unsigned int* nbytes_out_lo32, |
| unsigned int* nbytes_out_hi32 |
| ); |
| #endif |
| |
| |
| /*-- Utility functions --*/ |
| |
| BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffCompress) ( |
| char* dest, |
| unsigned int* destLen, |
| char* source, |
| unsigned int sourceLen, |
| int blockSize100k, |
| int verbosity, |
| int workFactor |
| ); |
| |
| BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffDecompress) ( |
| char* dest, |
| unsigned int* destLen, |
| char* source, |
| unsigned int sourceLen, |
| int small, |
| int verbosity |
| ); |
| |
| |
| /*-- |
| Code contributed by Yoshioka Tsuneo |
| (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp), |
| to support better zlib compatibility. |
| This code is not _officially_ part of libbzip2 (yet); |
| I haven't tested it, documented it, or considered the |
| threading-safeness of it. |
| If this code breaks, please contact both Yoshioka and me. |
| --*/ |
| |
| BZ_EXTERN const char * BZ_API(BZ2_bzlibVersion) ( |
| void |
| ); |
| |
| #ifndef BZ_NO_STDIO |
| BZ_EXTERN BZFILE * BZ_API(BZ2_bzopen) ( |
| const char *path, |
| const char *mode |
| ); |
| |
| BZ_EXTERN BZFILE * BZ_API(BZ2_bzdopen) ( |
| int fd, |
| const char *mode |
| ); |
| |
| BZ_EXTERN int BZ_API(BZ2_bzread) ( |
| BZFILE* b, |
| void* buf, |
| int len |
| ); |
| |
| BZ_EXTERN int BZ_API(BZ2_bzwrite) ( |
| BZFILE* b, |
| void* buf, |
| int len |
| ); |
| |
| BZ_EXTERN int BZ_API(BZ2_bzflush) ( |
| BZFILE* b |
| ); |
| |
| BZ_EXTERN void BZ_API(BZ2_bzclose) ( |
| BZFILE* b |
| ); |
| |
| BZ_EXTERN const char * BZ_API(BZ2_bzerror) ( |
| BZFILE *b, |
| int *errnum |
| ); |
| #endif |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif |
| |
| /*-------------------------------------------------------------*/ |
| /*--- end bzlib.h ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| |
| |
| |
| /*-- General stuff. --*/ |
| |
| #define BZ_VERSION "1.0.3, 17-Oct-2004" |
| |
| typedef char Char; |
| typedef unsigned char Bool; |
| typedef unsigned char UChar; |
| typedef int Int32; |
| typedef unsigned int UInt32; |
| typedef short Int16; |
| typedef unsigned short UInt16; |
| |
| #define True ((Bool)1) |
| #define False ((Bool)0) |
| |
| #ifndef __GNUC__ |
| #define __inline__ /* */ |
| #endif |
| |
| #ifndef BZ_NO_STDIO |
| extern void BZ2_bz__AssertH__fail ( int errcode ); |
| #define AssertH(cond,errcode) \ |
| { if (!(cond)) BZ2_bz__AssertH__fail ( errcode ); } |
| #if BZ_DEBUG |
| #define AssertD(cond,msg) \ |
| { if (!(cond)) { \ |
| fprintf ( stderr, \ |
| "\n\nlibbzip2(debug build): internal error\n\t%s\n", msg );\ |
| exit(1); \ |
| }} |
| #else |
| #define AssertD(cond,msg) /* */ |
| #endif |
| #define VPrintf0(zf) \ |
| fprintf(stderr,zf) |
| #define VPrintf1(zf,za1) \ |
| fprintf(stderr,zf,za1) |
| #define VPrintf2(zf,za1,za2) \ |
| fprintf(stderr,zf,za1,za2) |
| #define VPrintf3(zf,za1,za2,za3) \ |
| fprintf(stderr,zf,za1,za2,za3) |
| #define VPrintf4(zf,za1,za2,za3,za4) \ |
| fprintf(stderr,zf,za1,za2,za3,za4) |
| #define VPrintf5(zf,za1,za2,za3,za4,za5) \ |
| fprintf(stderr,zf,za1,za2,za3,za4,za5) |
| #else |
| extern void bz_internal_error ( int errcode ); |
| #define AssertH(cond,errcode) \ |
| { if (!(cond)) bz_internal_error ( errcode ); } |
| #define AssertD(cond,msg) /* */ |
| #define VPrintf0(zf) \ |
| vex_printf(zf) |
| #define VPrintf1(zf,za1) \ |
| vex_printf(zf,za1) |
| #define VPrintf2(zf,za1,za2) \ |
| vex_printf(zf,za1,za2) |
| #define VPrintf3(zf,za1,za2,za3) \ |
| vex_printf(zf,za1,za2,za3) |
| #define VPrintf4(zf,za1,za2,za3,za4) \ |
| vex_printf(zf,za1,za2,za3,za4) |
| #define VPrintf5(zf,za1,za2,za3,za4,za5) \ |
| vex_printf(zf,za1,za2,za3,za4,za5) |
| #endif |
| |
| |
| #define BZALLOC(nnn) (strm->bzalloc)(strm->opaque,(nnn),1) |
| #define BZFREE(ppp) (strm->bzfree)(strm->opaque,(ppp)) |
| |
| |
| /*-- Header bytes. --*/ |
| |
| #define BZ_HDR_B 0x42 /* 'B' */ |
| #define BZ_HDR_Z 0x5a /* 'Z' */ |
| #define BZ_HDR_h 0x68 /* 'h' */ |
| #define BZ_HDR_0 0x30 /* '0' */ |
| |
| /*-- Constants for the back end. --*/ |
| |
| #define BZ_MAX_ALPHA_SIZE 258 |
| #define BZ_MAX_CODE_LEN 23 |
| |
| #define BZ_RUNA 0 |
| #define BZ_RUNB 1 |
| |
| #define BZ_N_GROUPS 6 |
| #define BZ_G_SIZE 50 |
| #define BZ_N_ITERS 4 |
| |
| #define BZ_MAX_SELECTORS (2 + (900000 / BZ_G_SIZE)) |
| |
| |
| |
| /*-- Stuff for randomising repetitive blocks. --*/ |
| |
| extern Int32 BZ2_rNums[512]; |
| |
| #define BZ_RAND_DECLS \ |
| Int32 rNToGo; \ |
| Int32 rTPos \ |
| |
| #define BZ_RAND_INIT_MASK \ |
| s->rNToGo = 0; \ |
| s->rTPos = 0 \ |
| |
| #define BZ_RAND_MASK ((s->rNToGo == 1) ? 1 : 0) |
| |
| #define BZ_RAND_UPD_MASK \ |
| if (s->rNToGo == 0) { \ |
| s->rNToGo = BZ2_rNums[s->rTPos]; \ |
| s->rTPos++; \ |
| if (s->rTPos == 512) s->rTPos = 0; \ |
| } \ |
| s->rNToGo--; |
| |
| |
| |
| /*-- Stuff for doing CRCs. --*/ |
| |
| extern UInt32 BZ2_crc32Table[256]; |
| |
| #define BZ_INITIALISE_CRC(crcVar) \ |
| { \ |
| crcVar = 0xffffffffL; \ |
| } |
| |
| #define BZ_FINALISE_CRC(crcVar) \ |
| { \ |
| crcVar = ~(crcVar); \ |
| } |
| |
| #define BZ_UPDATE_CRC(crcVar,cha) \ |
| { \ |
| crcVar = (crcVar << 8) ^ \ |
| BZ2_crc32Table[(crcVar >> 24) ^ \ |
| ((UChar)cha)]; \ |
| } |
| |
| |
| |
| /*-- States and modes for compression. --*/ |
| |
| #define BZ_M_IDLE 1 |
| #define BZ_M_RUNNING 2 |
| #define BZ_M_FLUSHING 3 |
| #define BZ_M_FINISHING 4 |
| |
| #define BZ_S_OUTPUT 1 |
| #define BZ_S_INPUT 2 |
| |
| #define BZ_N_RADIX 2 |
| #define BZ_N_QSORT 12 |
| #define BZ_N_SHELL 18 |
| #define BZ_N_OVERSHOOT (BZ_N_RADIX + BZ_N_QSORT + BZ_N_SHELL + 2) |
| |
| |
| |
| |
| /*-- Structure holding all the compression-side stuff. --*/ |
| |
| typedef |
| struct { |
| /* pointer back to the struct bz_stream */ |
| bz_stream* strm; |
| |
| /* mode this stream is in, and whether inputting */ |
| /* or outputting data */ |
| Int32 mode; |
| Int32 state; |
| |
| /* remembers avail_in when flush/finish requested */ |
| UInt32 avail_in_expect; |
| |
| /* for doing the block sorting */ |
| UInt32* arr1; |
| UInt32* arr2; |
| UInt32* ftab; |
| Int32 origPtr; |
| |
| /* aliases for arr1 and arr2 */ |
| UInt32* ptr; |
| UChar* block; |
| UInt16* mtfv; |
| UChar* zbits; |
| |
| /* for deciding when to use the fallback sorting algorithm */ |
| Int32 workFactor; |
| |
| /* run-length-encoding of the input */ |
| UInt32 state_in_ch; |
| Int32 state_in_len; |
| BZ_RAND_DECLS; |
| |
| /* input and output limits and current posns */ |
| Int32 nblock; |
| Int32 nblockMAX; |
| Int32 numZ; |
| Int32 state_out_pos; |
| |
| /* map of bytes used in block */ |
| Int32 nInUse; |
| Bool inUse[256]; |
| UChar unseqToSeq[256]; |
| |
| /* the buffer for bit stream creation */ |
| UInt32 bsBuff; |
| Int32 bsLive; |
| |
| /* block and combined CRCs */ |
| UInt32 blockCRC; |
| UInt32 combinedCRC; |
| |
| /* misc administratium */ |
| Int32 verbosity; |
| Int32 blockNo; |
| Int32 blockSize100k; |
| |
| /* stuff for coding the MTF values */ |
| Int32 nMTF; |
| Int32 mtfFreq [BZ_MAX_ALPHA_SIZE]; |
| UChar selector [BZ_MAX_SELECTORS]; |
| UChar selectorMtf[BZ_MAX_SELECTORS]; |
| |
| UChar len [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE]; |
| Int32 code [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE]; |
| Int32 rfreq [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE]; |
| /* second dimension: only 3 needed; 4 makes index calculations faster */ |
| UInt32 len_pack[BZ_MAX_ALPHA_SIZE][4]; |
| |
| } |
| EState; |
| |
| |
| |
| /*-- externs for compression. --*/ |
| |
| extern void |
| BZ2_blockSort ( EState* ); |
| |
| extern void |
| BZ2_compressBlock ( EState*, Bool ); |
| |
| extern void |
| BZ2_bsInitWrite ( EState* ); |
| |
| extern void |
| BZ2_hbAssignCodes ( Int32*, UChar*, Int32, Int32, Int32 ); |
| |
| extern void |
| BZ2_hbMakeCodeLengths ( UChar*, Int32*, Int32, Int32 ); |
| |
| |
| |
| /*-- states for decompression. --*/ |
| |
| #define BZ_X_IDLE 1 |
| #define BZ_X_OUTPUT 2 |
| |
| #define BZ_X_MAGIC_1 10 |
| #define BZ_X_MAGIC_2 11 |
| #define BZ_X_MAGIC_3 12 |
| #define BZ_X_MAGIC_4 13 |
| #define BZ_X_BLKHDR_1 14 |
| #define BZ_X_BLKHDR_2 15 |
| #define BZ_X_BLKHDR_3 16 |
| #define BZ_X_BLKHDR_4 17 |
| #define BZ_X_BLKHDR_5 18 |
| #define BZ_X_BLKHDR_6 19 |
| #define BZ_X_BCRC_1 20 |
| #define BZ_X_BCRC_2 21 |
| #define BZ_X_BCRC_3 22 |
| #define BZ_X_BCRC_4 23 |
| #define BZ_X_RANDBIT 24 |
| #define BZ_X_ORIGPTR_1 25 |
| #define BZ_X_ORIGPTR_2 26 |
| #define BZ_X_ORIGPTR_3 27 |
| #define BZ_X_MAPPING_1 28 |
| #define BZ_X_MAPPING_2 29 |
| #define BZ_X_SELECTOR_1 30 |
| #define BZ_X_SELECTOR_2 31 |
| #define BZ_X_SELECTOR_3 32 |
| #define BZ_X_CODING_1 33 |
| #define BZ_X_CODING_2 34 |
| #define BZ_X_CODING_3 35 |
| #define BZ_X_MTF_1 36 |
| #define BZ_X_MTF_2 37 |
| #define BZ_X_MTF_3 38 |
| #define BZ_X_MTF_4 39 |
| #define BZ_X_MTF_5 40 |
| #define BZ_X_MTF_6 41 |
| #define BZ_X_ENDHDR_2 42 |
| #define BZ_X_ENDHDR_3 43 |
| #define BZ_X_ENDHDR_4 44 |
| #define BZ_X_ENDHDR_5 45 |
| #define BZ_X_ENDHDR_6 46 |
| #define BZ_X_CCRC_1 47 |
| #define BZ_X_CCRC_2 48 |
| #define BZ_X_CCRC_3 49 |
| #define BZ_X_CCRC_4 50 |
| |
| |
| |
| /*-- Constants for the fast MTF decoder. --*/ |
| |
| #define MTFA_SIZE 4096 |
| #define MTFL_SIZE 16 |
| |
| |
| |
| /*-- Structure holding all the decompression-side stuff. --*/ |
| |
| typedef |
| struct { |
| /* pointer back to the struct bz_stream */ |
| bz_stream* strm; |
| |
| /* state indicator for this stream */ |
| Int32 state; |
| |
| /* for doing the final run-length decoding */ |
| UChar state_out_ch; |
| Int32 state_out_len; |
| Bool blockRandomised; |
| BZ_RAND_DECLS; |
| |
| /* the buffer for bit stream reading */ |
| UInt32 bsBuff; |
| Int32 bsLive; |
| |
| /* misc administratium */ |
| Int32 blockSize100k; |
| Bool smallDecompress; |
| Int32 currBlockNo; |
| Int32 verbosity; |
| |
| /* for undoing the Burrows-Wheeler transform */ |
| Int32 origPtr; |
| UInt32 tPos; |
| Int32 k0; |
| Int32 unzftab[256]; |
| Int32 nblock_used; |
| Int32 cftab[257]; |
| Int32 cftabCopy[257]; |
| |
| /* for undoing the Burrows-Wheeler transform (FAST) */ |
| UInt32 *tt; |
| |
| /* for undoing the Burrows-Wheeler transform (SMALL) */ |
| UInt16 *ll16; |
| UChar *ll4; |
| |
| /* stored and calculated CRCs */ |
| UInt32 storedBlockCRC; |
| UInt32 storedCombinedCRC; |
| UInt32 calculatedBlockCRC; |
| UInt32 calculatedCombinedCRC; |
| |
| /* map of bytes used in block */ |
| Int32 nInUse; |
| Bool inUse[256]; |
| Bool inUse16[16]; |
| UChar seqToUnseq[256]; |
| |
| /* for decoding the MTF values */ |
| UChar mtfa [MTFA_SIZE]; |
| Int32 mtfbase[256 / MTFL_SIZE]; |
| UChar selector [BZ_MAX_SELECTORS]; |
| UChar selectorMtf[BZ_MAX_SELECTORS]; |
| UChar len [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE]; |
| |
| Int32 limit [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE]; |
| Int32 base [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE]; |
| Int32 perm [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE]; |
| Int32 minLens[BZ_N_GROUPS]; |
| |
| /* save area for scalars in the main decompress code */ |
| Int32 save_i; |
| Int32 save_j; |
| Int32 save_t; |
| Int32 save_alphaSize; |
| Int32 save_nGroups; |
| Int32 save_nSelectors; |
| Int32 save_EOB; |
| Int32 save_groupNo; |
| Int32 save_groupPos; |
| Int32 save_nextSym; |
| Int32 save_nblockMAX; |
| Int32 save_nblock; |
| Int32 save_es; |
| Int32 save_N; |
| Int32 save_curr; |
| Int32 save_zt; |
| Int32 save_zn; |
| Int32 save_zvec; |
| Int32 save_zj; |
| Int32 save_gSel; |
| Int32 save_gMinlen; |
| Int32* save_gLimit; |
| Int32* save_gBase; |
| Int32* save_gPerm; |
| |
| } |
| DState; |
| |
| |
| |
| /*-- Macros for decompression. --*/ |
| |
| #define BZ_GET_FAST(cccc) \ |
| s->tPos = s->tt[s->tPos]; \ |
| cccc = (UChar)(s->tPos & 0xff); \ |
| s->tPos >>= 8; |
| |
| #define BZ_GET_FAST_C(cccc) \ |
| c_tPos = c_tt[c_tPos]; \ |
| cccc = (UChar)(c_tPos & 0xff); \ |
| c_tPos >>= 8; |
| |
| #define SET_LL4(i,n) \ |
| { if (((i) & 0x1) == 0) \ |
| s->ll4[(i) >> 1] = (s->ll4[(i) >> 1] & 0xf0) | (n); else \ |
| s->ll4[(i) >> 1] = (s->ll4[(i) >> 1] & 0x0f) | ((n) << 4); \ |
| } |
| |
| #define GET_LL4(i) \ |
| ((((UInt32)(s->ll4[(i) >> 1])) >> (((i) << 2) & 0x4)) & 0xF) |
| |
| #define SET_LL(i,n) \ |
| { s->ll16[i] = (UInt16)(n & 0x0000ffff); \ |
| SET_LL4(i, n >> 16); \ |
| } |
| |
| #define GET_LL(i) \ |
| (((UInt32)s->ll16[i]) | (GET_LL4(i) << 16)) |
| |
| #define BZ_GET_SMALL(cccc) \ |
| cccc = BZ2_indexIntoF ( s->tPos, s->cftab ); \ |
| s->tPos = GET_LL(s->tPos); |
| |
| |
| /*-- externs for decompression. --*/ |
| |
| extern Int32 |
| BZ2_indexIntoF ( Int32, Int32* ); |
| |
| extern Int32 |
| BZ2_decompress ( DState* ); |
| |
| extern void |
| BZ2_hbCreateDecodeTables ( Int32*, Int32*, Int32*, UChar*, |
| Int32, Int32, Int32 ); |
| |
| |
| #endif |
| |
| |
| /*-- BZ_NO_STDIO seems to make NULL disappear on some platforms. --*/ |
| |
| #ifdef BZ_NO_STDIO |
| #ifndef NULL |
| #define NULL 0 |
| #endif |
| #endif |
| |
| |
| /*-------------------------------------------------------------*/ |
| /*--- end bzlib_private.h ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| |
| /* Something which has the same size as void* on the host. That is, |
| it is 32 bits on a 32-bit host and 64 bits on a 64-bit host, and so |
| it can safely be coerced to and from a pointer type on the host |
| machine. */ |
| typedef unsigned long HWord; |
| typedef char HChar; |
| typedef signed int Int; |
| typedef unsigned int UInt; |
| |
| typedef signed long long int Long; |
| typedef unsigned long long int ULong; |
| |
| |
| ///////////////////////////////////////////////////////////////////// |
| ///////////////////////////////////////////////////////////////////// |
| |
| static HWord (*serviceFn)(HWord,HWord) = 0; |
| |
| #if 0 |
| static char* my_strcpy ( char* dest, const char* src ) |
| { |
| char* dest_orig = dest; |
| while (*src) *dest++ = *src++; |
| *dest = 0; |
| return dest_orig; |
| } |
| |
| static void* my_memcpy ( void *dest, const void *src, int sz ) |
| { |
| const char *s = (const char *)src; |
| char *d = (char *)dest; |
| |
| while (sz--) |
| *d++ = *s++; |
| |
| return dest; |
| } |
| |
| static void* my_memmove( void *dst, const void *src, unsigned int len ) |
| { |
| register char *d; |
| register char *s; |
| if ( dst > src ) { |
| d = (char *)dst + len - 1; |
| s = (char *)src + len - 1; |
| while ( len >= 4 ) { |
| *d-- = *s--; |
| *d-- = *s--; |
| *d-- = *s--; |
| *d-- = *s--; |
| len -= 4; |
| } |
| while ( len-- ) { |
| *d-- = *s--; |
| } |
| } else if ( dst < src ) { |
| d = (char *)dst; |
| s = (char *)src; |
| while ( len >= 4 ) { |
| *d++ = *s++; |
| *d++ = *s++; |
| *d++ = *s++; |
| *d++ = *s++; |
| len -= 4; |
| } |
| while ( len-- ) { |
| *d++ = *s++; |
| } |
| } |
| return dst; |
| } |
| #endif |
| |
| char* my_strcat ( char* dest, const char* src ) |
| { |
| char* dest_orig = dest; |
| while (*dest) dest++; |
| while (*src) *dest++ = *src++; |
| *dest = 0; |
| return dest_orig; |
| } |
| |
| |
| ///////////////////////////////////////////////////////////////////// |
| |
| static void vex_log_bytes ( char* p, int n ) |
| { |
| int i; |
| for (i = 0; i < n; i++) |
| (*serviceFn)( 1, (int)p[i] ); |
| } |
| |
| /*---------------------------------------------------------*/ |
| /*--- vex_printf ---*/ |
| /*---------------------------------------------------------*/ |
| |
| /* This should be the only <...> include in the entire VEX library. |
| New code for vex_util.c should go above this point. */ |
| #include <stdarg.h> |
| |
| static HChar vex_toupper ( HChar c ) |
| { |
| if (c >= 'a' && c <= 'z') |
| return c + ('A' - 'a'); |
| else |
| return c; |
| } |
| |
| static Int vex_strlen ( const HChar* str ) |
| { |
| Int i = 0; |
| while (str[i] != 0) i++; |
| return i; |
| } |
| |
| Bool vex_streq ( const HChar* s1, const HChar* s2 ) |
| { |
| while (True) { |
| if (*s1 == 0 && *s2 == 0) |
| return True; |
| if (*s1 != *s2) |
| return False; |
| s1++; |
| s2++; |
| } |
| } |
| |
| /* Some flags. */ |
| #define VG_MSG_SIGNED 1 /* The value is signed. */ |
| #define VG_MSG_ZJUSTIFY 2 /* Must justify with '0'. */ |
| #define VG_MSG_LJUSTIFY 4 /* Must justify on the left. */ |
| #define VG_MSG_PAREN 8 /* Parenthesize if present (for %y) */ |
| #define VG_MSG_COMMA 16 /* Add commas to numbers (for %d, %u) */ |
| |
| /* Copy a string into the buffer. */ |
| static UInt |
| myvprintf_str ( void(*send)(HChar), Int flags, Int width, HChar* str, |
| Bool capitalise ) |
| { |
| # define MAYBE_TOUPPER(ch) (capitalise ? vex_toupper(ch) : (ch)) |
| UInt ret = 0; |
| Int i, extra; |
| Int len = vex_strlen(str); |
| |
| if (width == 0) { |
| ret += len; |
| for (i = 0; i < len; i++) |
| send(MAYBE_TOUPPER(str[i])); |
| return ret; |
| } |
| |
| if (len > width) { |
| ret += width; |
| for (i = 0; i < width; i++) |
| send(MAYBE_TOUPPER(str[i])); |
| return ret; |
| } |
| |
| extra = width - len; |
| if (flags & VG_MSG_LJUSTIFY) { |
| ret += extra; |
| for (i = 0; i < extra; i++) |
| send(' '); |
| } |
| ret += len; |
| for (i = 0; i < len; i++) |
| send(MAYBE_TOUPPER(str[i])); |
| if (!(flags & VG_MSG_LJUSTIFY)) { |
| ret += extra; |
| for (i = 0; i < extra; i++) |
| send(' '); |
| } |
| |
| # undef MAYBE_TOUPPER |
| |
| return ret; |
| } |
| |
| /* Write P into the buffer according to these args: |
| * If SIGN is true, p is a signed. |
| * BASE is the base. |
| * If WITH_ZERO is true, '0' must be added. |
| * WIDTH is the width of the field. |
| */ |
| static UInt |
| myvprintf_int64 ( void(*send)(HChar), Int flags, Int base, Int width, ULong pL) |
| { |
| HChar buf[40]; |
| Int ind = 0; |
| Int i, nc = 0; |
| Bool neg = False; |
| HChar *digits = "0123456789ABCDEF"; |
| UInt ret = 0; |
| UInt p = (UInt)pL; |
| |
| if (base < 2 || base > 16) |
| return ret; |
| |
| if ((flags & VG_MSG_SIGNED) && (Int)p < 0) { |
| p = - (Int)p; |
| neg = True; |
| } |
| |
| if (p == 0) |
| buf[ind++] = '0'; |
| else { |
| while (p > 0) { |
| if ((flags & VG_MSG_COMMA) && 10 == base && |
| 0 == (ind-nc) % 3 && 0 != ind) |
| { |
| buf[ind++] = ','; |
| nc++; |
| } |
| buf[ind++] = digits[p % base]; |
| p /= base; |
| } |
| } |
| |
| if (neg) |
| buf[ind++] = '-'; |
| |
| if (width > 0 && !(flags & VG_MSG_LJUSTIFY)) { |
| for(; ind < width; ind++) { |
| //vassert(ind < 39); |
| buf[ind] = ((flags & VG_MSG_ZJUSTIFY) ? '0': ' '); |
| } |
| } |
| |
| /* Reverse copy to buffer. */ |
| ret += ind; |
| for (i = ind -1; i >= 0; i--) { |
| send(buf[i]); |
| } |
| if (width > 0 && (flags & VG_MSG_LJUSTIFY)) { |
| for(; ind < width; ind++) { |
| ret++; |
| send(' '); // Never pad with zeroes on RHS -- changes the value! |
| } |
| } |
| return ret; |
| } |
| |
| |
| /* A simple vprintf(). */ |
| static |
| UInt vprintf_wrk ( void(*send)(HChar), const HChar *format, va_list vargs ) |
| { |
| UInt ret = 0; |
| int i; |
| int flags; |
| int width; |
| Bool is_long; |
| |
| /* We assume that vargs has already been initialised by the |
| caller, using va_start, and that the caller will similarly |
| clean up with va_end. |
| */ |
| |
| for (i = 0; format[i] != 0; i++) { |
| if (format[i] != '%') { |
| send(format[i]); |
| ret++; |
| continue; |
| } |
| i++; |
| /* A '%' has been found. Ignore a trailing %. */ |
| if (format[i] == 0) |
| break; |
| if (format[i] == '%') { |
| /* `%%' is replaced by `%'. */ |
| send('%'); |
| ret++; |
| continue; |
| } |
| flags = 0; |
| is_long = False; |
| width = 0; /* length of the field. */ |
| if (format[i] == '(') { |
| flags |= VG_MSG_PAREN; |
| i++; |
| } |
| /* If ',' follows '%', commas will be inserted. */ |
| if (format[i] == ',') { |
| flags |= VG_MSG_COMMA; |
| i++; |
| } |
| /* If '-' follows '%', justify on the left. */ |
| if (format[i] == '-') { |
| flags |= VG_MSG_LJUSTIFY; |
| i++; |
| } |
| /* If '0' follows '%', pads will be inserted. */ |
| if (format[i] == '0') { |
| flags |= VG_MSG_ZJUSTIFY; |
| i++; |
| } |
| /* Compute the field length. */ |
| while (format[i] >= '0' && format[i] <= '9') { |
| width *= 10; |
| width += format[i++] - '0'; |
| } |
| while (format[i] == 'l') { |
| i++; |
| is_long = True; |
| } |
| |
| switch (format[i]) { |
| case 'd': /* %d */ |
| flags |= VG_MSG_SIGNED; |
| if (is_long) |
| ret += myvprintf_int64(send, flags, 10, width, |
| (ULong)(va_arg (vargs, Long))); |
| else |
| ret += myvprintf_int64(send, flags, 10, width, |
| (ULong)(va_arg (vargs, Int))); |
| break; |
| case 'u': /* %u */ |
| if (is_long) |
| ret += myvprintf_int64(send, flags, 10, width, |
| (ULong)(va_arg (vargs, ULong))); |
| else |
| ret += myvprintf_int64(send, flags, 10, width, |
| (ULong)(va_arg (vargs, UInt))); |
| break; |
| case 'p': /* %p */ |
| ret += 2; |
| send('0'); |
| send('x'); |
| ret += myvprintf_int64(send, flags, 16, width, |
| (ULong)((HWord)va_arg (vargs, void *))); |
| break; |
| case 'x': /* %x */ |
| if (is_long) |
| ret += myvprintf_int64(send, flags, 16, width, |
| (ULong)(va_arg (vargs, ULong))); |
| else |
| ret += myvprintf_int64(send, flags, 16, width, |
| (ULong)(va_arg (vargs, UInt))); |
| break; |
| case 'c': /* %c */ |
| ret++; |
| send((va_arg (vargs, int))); |
| break; |
| case 's': case 'S': { /* %s */ |
| char *str = va_arg (vargs, char *); |
| if (str == (char*) 0) str = "(null)"; |
| ret += myvprintf_str(send, flags, width, str, |
| (format[i]=='S')); |
| break; |
| } |
| # if 0 |
| case 'y': { /* %y - print symbol */ |
| Char buf[100]; |
| Char *cp = buf; |
| Addr a = va_arg(vargs, Addr); |
| |
| if (flags & VG_MSG_PAREN) |
| *cp++ = '('; |
| if (VG_(get_fnname_w_offset)(a, cp, sizeof(buf)-4)) { |
| if (flags & VG_MSG_PAREN) { |
| cp += VG_(strlen)(cp); |
| *cp++ = ')'; |
| *cp = '\0'; |
| } |
| ret += myvprintf_str(send, flags, width, buf, 0); |
| } |
| break; |
| } |
| # endif |
| default: |
| break; |
| } |
| } |
| return ret; |
| } |
| |
| |
| /* A general replacement for printf(). Note that only low-level |
| debugging info should be sent via here. The official route is to |
| to use vg_message(). This interface is deprecated. |
| */ |
| static HChar myprintf_buf[1000]; |
| static Int n_myprintf_buf; |
| |
| static void add_to_myprintf_buf ( HChar c ) |
| { |
| if (c == '\n' || n_myprintf_buf >= 1000-10 /*paranoia*/ ) { |
| (*vex_log_bytes)( myprintf_buf, vex_strlen(myprintf_buf) ); |
| n_myprintf_buf = 0; |
| myprintf_buf[n_myprintf_buf] = 0; |
| } |
| myprintf_buf[n_myprintf_buf++] = c; |
| myprintf_buf[n_myprintf_buf] = 0; |
| } |
| |
| static UInt vex_printf ( const char *format, ... ) |
| { |
| UInt ret; |
| va_list vargs; |
| va_start(vargs,format); |
| |
| n_myprintf_buf = 0; |
| myprintf_buf[n_myprintf_buf] = 0; |
| ret = vprintf_wrk ( add_to_myprintf_buf, format, vargs ); |
| |
| if (n_myprintf_buf > 0) { |
| (*vex_log_bytes)( myprintf_buf, n_myprintf_buf ); |
| } |
| |
| va_end(vargs); |
| |
| return ret; |
| } |
| |
| /*---------------------------------------------------------------*/ |
| /*--- end vex_util.c ---*/ |
| /*---------------------------------------------------------------*/ |
| |
| |
| ///////////////////////////////////////////////////////////////////// |
| ///////////////////////////////////////////////////////////////////// |
| ///////////////////////////////////////////////////////////////////// |
| ///////////////////////////////////////////////////////////////////// |
| |
| |
| /*-------------------------------------------------------------*/ |
| /*--- Decompression machinery ---*/ |
| /*--- decompress.c ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| /*-- |
| This file is a part of bzip2 and/or libbzip2, a program and |
| library for lossless, block-sorting data compression. |
| |
| Copyright (C) 1996-2004 Julian R Seward. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| 1. Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| |
| 2. The origin of this software must not be misrepresented; you must |
| not claim that you wrote the original software. If you use this |
| software in a product, an acknowledgment in the product |
| documentation would be appreciated but is not required. |
| |
| 3. Altered source versions must be plainly marked as such, and must |
| not be misrepresented as being the original software. |
| |
| 4. The name of the author may not be used to endorse or promote |
| products derived from this software without specific prior written |
| permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS |
| OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| Julian Seward, Cambridge, UK. |
| jseward@bzip.org |
| bzip2/libbzip2 version 1.0 of 21 March 2000 |
| |
| This program is based on (at least) the work of: |
| Mike Burrows |
| David Wheeler |
| Peter Fenwick |
| Alistair Moffat |
| Radford Neal |
| Ian H. Witten |
| Robert Sedgewick |
| Jon L. Bentley |
| |
| For more information on these sources, see the manual. |
| --*/ |
| |
| |
| |
| |
| /*---------------------------------------------------*/ |
| static |
| void makeMaps_d ( DState* s ) |
| { |
| Int32 i; |
| s->nInUse = 0; |
| for (i = 0; i < 256; i++) |
| if (s->inUse[i]) { |
| s->seqToUnseq[s->nInUse] = i; |
| s->nInUse++; |
| } |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| #define RETURN(rrr) \ |
| { retVal = rrr; goto save_state_and_return; }; |
| |
| #define GET_BITS(lll,vvv,nnn) \ |
| case lll: s->state = lll; \ |
| while (True) { \ |
| if (s->bsLive >= nnn) { \ |
| UInt32 v; \ |
| v = (s->bsBuff >> \ |
| (s->bsLive-nnn)) & ((1 << nnn)-1); \ |
| s->bsLive -= nnn; \ |
| vvv = v; \ |
| break; \ |
| } \ |
| if (s->strm->avail_in == 0) RETURN(BZ_OK); \ |
| s->bsBuff \ |
| = (s->bsBuff << 8) | \ |
| ((UInt32) \ |
| (*((UChar*)(s->strm->next_in)))); \ |
| s->bsLive += 8; \ |
| s->strm->next_in++; \ |
| s->strm->avail_in--; \ |
| s->strm->total_in_lo32++; \ |
| if (s->strm->total_in_lo32 == 0) \ |
| s->strm->total_in_hi32++; \ |
| } |
| |
| #define GET_UCHAR(lll,uuu) \ |
| GET_BITS(lll,uuu,8) |
| |
| #define GET_BIT(lll,uuu) \ |
| GET_BITS(lll,uuu,1) |
| |
| /*---------------------------------------------------*/ |
| #define GET_MTF_VAL(label1,label2,lval) \ |
| { \ |
| if (groupPos == 0) { \ |
| groupNo++; \ |
| if (groupNo >= nSelectors) \ |
| RETURN(BZ_DATA_ERROR); \ |
| groupPos = BZ_G_SIZE; \ |
| gSel = s->selector[groupNo]; \ |
| gMinlen = s->minLens[gSel]; \ |
| gLimit = &(s->limit[gSel][0]); \ |
| gPerm = &(s->perm[gSel][0]); \ |
| gBase = &(s->base[gSel][0]); \ |
| } \ |
| groupPos--; \ |
| zn = gMinlen; \ |
| GET_BITS(label1, zvec, zn); \ |
| while (1) { \ |
| if (zn > 20 /* the longest code */) \ |
| RETURN(BZ_DATA_ERROR); \ |
| if (zvec <= gLimit[zn]) break; \ |
| zn++; \ |
| GET_BIT(label2, zj); \ |
| zvec = (zvec << 1) | zj; \ |
| }; \ |
| if (zvec - gBase[zn] < 0 \ |
| || zvec - gBase[zn] >= BZ_MAX_ALPHA_SIZE) \ |
| RETURN(BZ_DATA_ERROR); \ |
| lval = gPerm[zvec - gBase[zn]]; \ |
| } |
| |
| |
| |
| /*---------------------------------------------------*/ |
| __inline__ Int32 BZ2_indexIntoF ( Int32 indx, Int32 *cftab ) |
| { |
| Int32 nb, na, mid; |
| nb = 0; |
| na = 256; |
| do { |
| mid = (nb + na) >> 1; |
| if (indx >= cftab[mid]) nb = mid; else na = mid; |
| } |
| while (na - nb != 1); |
| return nb; |
| } |
| |
| /*---------------------------------------------------*/ |
| Int32 BZ2_decompress ( DState* s ) |
| { |
| UChar uc; |
| Int32 retVal; |
| Int32 minLen, maxLen; |
| bz_stream* strm = s->strm; |
| |
| /* stuff that needs to be saved/restored */ |
| Int32 i; |
| Int32 j; |
| Int32 t; |
| Int32 alphaSize; |
| Int32 nGroups; |
| Int32 nSelectors; |
| Int32 EOB; |
| Int32 groupNo; |
| Int32 groupPos; |
| Int32 nextSym; |
| Int32 nblockMAX; |
| Int32 nblock; |
| Int32 es; |
| Int32 N; |
| Int32 curr; |
| Int32 zt; |
| Int32 zn; |
| Int32 zvec; |
| Int32 zj; |
| Int32 gSel; |
| Int32 gMinlen; |
| Int32* gLimit; |
| Int32* gBase; |
| Int32* gPerm; |
| |
| if (s->state == BZ_X_MAGIC_1) { |
| /*initialise the save area*/ |
| s->save_i = 0; |
| s->save_j = 0; |
| s->save_t = 0; |
| s->save_alphaSize = 0; |
| s->save_nGroups = 0; |
| s->save_nSelectors = 0; |
| s->save_EOB = 0; |
| s->save_groupNo = 0; |
| s->save_groupPos = 0; |
| s->save_nextSym = 0; |
| s->save_nblockMAX = 0; |
| s->save_nblock = 0; |
| s->save_es = 0; |
| s->save_N = 0; |
| s->save_curr = 0; |
| s->save_zt = 0; |
| s->save_zn = 0; |
| s->save_zvec = 0; |
| s->save_zj = 0; |
| s->save_gSel = 0; |
| s->save_gMinlen = 0; |
| s->save_gLimit = NULL; |
| s->save_gBase = NULL; |
| s->save_gPerm = NULL; |
| } |
| |
| /*restore from the save area*/ |
| i = s->save_i; |
| j = s->save_j; |
| t = s->save_t; |
| alphaSize = s->save_alphaSize; |
| nGroups = s->save_nGroups; |
| nSelectors = s->save_nSelectors; |
| EOB = s->save_EOB; |
| groupNo = s->save_groupNo; |
| groupPos = s->save_groupPos; |
| nextSym = s->save_nextSym; |
| nblockMAX = s->save_nblockMAX; |
| nblock = s->save_nblock; |
| es = s->save_es; |
| N = s->save_N; |
| curr = s->save_curr; |
| zt = s->save_zt; |
| zn = s->save_zn; |
| zvec = s->save_zvec; |
| zj = s->save_zj; |
| gSel = s->save_gSel; |
| gMinlen = s->save_gMinlen; |
| gLimit = s->save_gLimit; |
| gBase = s->save_gBase; |
| gPerm = s->save_gPerm; |
| |
| retVal = BZ_OK; |
| |
| switch (s->state) { |
| |
| GET_UCHAR(BZ_X_MAGIC_1, uc); |
| if (uc != BZ_HDR_B) RETURN(BZ_DATA_ERROR_MAGIC); |
| |
| GET_UCHAR(BZ_X_MAGIC_2, uc); |
| if (uc != BZ_HDR_Z) RETURN(BZ_DATA_ERROR_MAGIC); |
| |
| GET_UCHAR(BZ_X_MAGIC_3, uc) |
| if (uc != BZ_HDR_h) RETURN(BZ_DATA_ERROR_MAGIC); |
| |
| GET_BITS(BZ_X_MAGIC_4, s->blockSize100k, 8) |
| if (s->blockSize100k < (BZ_HDR_0 + 1) || |
| s->blockSize100k > (BZ_HDR_0 + 9)) RETURN(BZ_DATA_ERROR_MAGIC); |
| s->blockSize100k -= BZ_HDR_0; |
| |
| if (s->smallDecompress) { |
| s->ll16 = BZALLOC( s->blockSize100k * 100000 * sizeof(UInt16) ); |
| s->ll4 = BZALLOC( |
| ((1 + s->blockSize100k * 100000) >> 1) * sizeof(UChar) |
| ); |
| if (s->ll16 == NULL || s->ll4 == NULL) RETURN(BZ_MEM_ERROR); |
| } else { |
| s->tt = BZALLOC( s->blockSize100k * 100000 * sizeof(Int32) ); |
| if (s->tt == NULL) RETURN(BZ_MEM_ERROR); |
| } |
| |
| GET_UCHAR(BZ_X_BLKHDR_1, uc); |
| |
| if (uc == 0x17) goto endhdr_2; |
| if (uc != 0x31) RETURN(BZ_DATA_ERROR); |
| GET_UCHAR(BZ_X_BLKHDR_2, uc); |
| if (uc != 0x41) RETURN(BZ_DATA_ERROR); |
| GET_UCHAR(BZ_X_BLKHDR_3, uc); |
| if (uc != 0x59) RETURN(BZ_DATA_ERROR); |
| GET_UCHAR(BZ_X_BLKHDR_4, uc); |
| if (uc != 0x26) RETURN(BZ_DATA_ERROR); |
| GET_UCHAR(BZ_X_BLKHDR_5, uc); |
| if (uc != 0x53) RETURN(BZ_DATA_ERROR); |
| GET_UCHAR(BZ_X_BLKHDR_6, uc); |
| if (uc != 0x59) RETURN(BZ_DATA_ERROR); |
| |
| s->currBlockNo++; |
| if (s->verbosity >= 2) |
| VPrintf1 ( "\n [%d: huff+mtf ", s->currBlockNo ); |
| |
| s->storedBlockCRC = 0; |
| GET_UCHAR(BZ_X_BCRC_1, uc); |
| s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc); |
| GET_UCHAR(BZ_X_BCRC_2, uc); |
| s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc); |
| GET_UCHAR(BZ_X_BCRC_3, uc); |
| s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc); |
| GET_UCHAR(BZ_X_BCRC_4, uc); |
| s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc); |
| |
| GET_BITS(BZ_X_RANDBIT, s->blockRandomised, 1); |
| |
| s->origPtr = 0; |
| GET_UCHAR(BZ_X_ORIGPTR_1, uc); |
| s->origPtr = (s->origPtr << 8) | ((Int32)uc); |
| GET_UCHAR(BZ_X_ORIGPTR_2, uc); |
| s->origPtr = (s->origPtr << 8) | ((Int32)uc); |
| GET_UCHAR(BZ_X_ORIGPTR_3, uc); |
| s->origPtr = (s->origPtr << 8) | ((Int32)uc); |
| |
| if (s->origPtr < 0) |
| RETURN(BZ_DATA_ERROR); |
| if (s->origPtr > 10 + 100000*s->blockSize100k) |
| RETURN(BZ_DATA_ERROR); |
| |
| /*--- Receive the mapping table ---*/ |
| for (i = 0; i < 16; i++) { |
| GET_BIT(BZ_X_MAPPING_1, uc); |
| if (uc == 1) |
| s->inUse16[i] = True; else |
| s->inUse16[i] = False; |
| } |
| |
| for (i = 0; i < 256; i++) s->inUse[i] = False; |
| |
| for (i = 0; i < 16; i++) |
| if (s->inUse16[i]) |
| for (j = 0; j < 16; j++) { |
| GET_BIT(BZ_X_MAPPING_2, uc); |
| if (uc == 1) s->inUse[i * 16 + j] = True; |
| } |
| makeMaps_d ( s ); |
| if (s->nInUse == 0) RETURN(BZ_DATA_ERROR); |
| alphaSize = s->nInUse+2; |
| |
| /*--- Now the selectors ---*/ |
| GET_BITS(BZ_X_SELECTOR_1, nGroups, 3); |
| if (nGroups < 2 || nGroups > 6) RETURN(BZ_DATA_ERROR); |
| GET_BITS(BZ_X_SELECTOR_2, nSelectors, 15); |
| if (nSelectors < 1) RETURN(BZ_DATA_ERROR); |
| for (i = 0; i < nSelectors; i++) { |
| j = 0; |
| while (True) { |
| GET_BIT(BZ_X_SELECTOR_3, uc); |
| if (uc == 0) break; |
| j++; |
| if (j >= nGroups) RETURN(BZ_DATA_ERROR); |
| } |
| s->selectorMtf[i] = j; |
| } |
| |
| /*--- Undo the MTF values for the selectors. ---*/ |
| { |
| UChar pos[BZ_N_GROUPS], tmp, v; |
| for (v = 0; v < nGroups; v++) pos[v] = v; |
| |
| for (i = 0; i < nSelectors; i++) { |
| v = s->selectorMtf[i]; |
| tmp = pos[v]; |
| while (v > 0) { pos[v] = pos[v-1]; v--; } |
| pos[0] = tmp; |
| s->selector[i] = tmp; |
| } |
| } |
| |
| /*--- Now the coding tables ---*/ |
| for (t = 0; t < nGroups; t++) { |
| GET_BITS(BZ_X_CODING_1, curr, 5); |
| for (i = 0; i < alphaSize; i++) { |
| while (True) { |
| if (curr < 1 || curr > 20) RETURN(BZ_DATA_ERROR); |
| GET_BIT(BZ_X_CODING_2, uc); |
| if (uc == 0) break; |
| GET_BIT(BZ_X_CODING_3, uc); |
| if (uc == 0) curr++; else curr--; |
| } |
| s->len[t][i] = curr; |
| } |
| } |
| |
| /*--- Create the Huffman decoding tables ---*/ |
| for (t = 0; t < nGroups; t++) { |
| minLen = 32; |
| maxLen = 0; |
| for (i = 0; i < alphaSize; i++) { |
| if (s->len[t][i] > maxLen) maxLen = s->len[t][i]; |
| if (s->len[t][i] < minLen) minLen = s->len[t][i]; |
| } |
| BZ2_hbCreateDecodeTables ( |
| &(s->limit[t][0]), |
| &(s->base[t][0]), |
| &(s->perm[t][0]), |
| &(s->len[t][0]), |
| minLen, maxLen, alphaSize |
| ); |
| s->minLens[t] = minLen; |
| } |
| |
| /*--- Now the MTF values ---*/ |
| |
| EOB = s->nInUse+1; |
| nblockMAX = 100000 * s->blockSize100k; |
| groupNo = -1; |
| groupPos = 0; |
| |
| for (i = 0; i <= 255; i++) s->unzftab[i] = 0; |
| |
| /*-- MTF init --*/ |
| { |
| Int32 ii, jj, kk; |
| kk = MTFA_SIZE-1; |
| for (ii = 256 / MTFL_SIZE - 1; ii >= 0; ii--) { |
| for (jj = MTFL_SIZE-1; jj >= 0; jj--) { |
| s->mtfa[kk] = (UChar)(ii * MTFL_SIZE + jj); |
| kk--; |
| } |
| s->mtfbase[ii] = kk + 1; |
| } |
| } |
| /*-- end MTF init --*/ |
| |
| nblock = 0; |
| GET_MTF_VAL(BZ_X_MTF_1, BZ_X_MTF_2, nextSym); |
| |
| while (True) { |
| |
| if (nextSym == EOB) break; |
| |
| if (nextSym == BZ_RUNA || nextSym == BZ_RUNB) { |
| |
| es = -1; |
| N = 1; |
| do { |
| if (nextSym == BZ_RUNA) es = es + (0+1) * N; else |
| if (nextSym == BZ_RUNB) es = es + (1+1) * N; |
| N = N * 2; |
| GET_MTF_VAL(BZ_X_MTF_3, BZ_X_MTF_4, nextSym); |
| } |
| while (nextSym == BZ_RUNA || nextSym == BZ_RUNB); |
| |
| es++; |
| uc = s->seqToUnseq[ s->mtfa[s->mtfbase[0]] ]; |
| s->unzftab[uc] += es; |
| |
| if (s->smallDecompress) |
| while (es > 0) { |
| if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR); |
| s->ll16[nblock] = (UInt16)uc; |
| nblock++; |
| es--; |
| } |
| else |
| while (es > 0) { |
| if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR); |
| s->tt[nblock] = (UInt32)uc; |
| nblock++; |
| es--; |
| }; |
| |
| continue; |
| |
| } else { |
| |
| if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR); |
| |
| /*-- uc = MTF ( nextSym-1 ) --*/ |
| { |
| Int32 ii, jj, kk, pp, lno, off; |
| UInt32 nn; |
| nn = (UInt32)(nextSym - 1); |
| |
| if (nn < MTFL_SIZE) { |
| /* avoid general-case expense */ |
| pp = s->mtfbase[0]; |
| uc = s->mtfa[pp+nn]; |
| while (nn > 3) { |
| Int32 z = pp+nn; |
| s->mtfa[(z) ] = s->mtfa[(z)-1]; |
| s->mtfa[(z)-1] = s->mtfa[(z)-2]; |
| s->mtfa[(z)-2] = s->mtfa[(z)-3]; |
| s->mtfa[(z)-3] = s->mtfa[(z)-4]; |
| nn -= 4; |
| } |
| while (nn > 0) { |
| s->mtfa[(pp+nn)] = s->mtfa[(pp+nn)-1]; nn--; |
| }; |
| s->mtfa[pp] = uc; |
| } else { |
| /* general case */ |
| lno = nn / MTFL_SIZE; |
| off = nn % MTFL_SIZE; |
| pp = s->mtfbase[lno] + off; |
| uc = s->mtfa[pp]; |
| while (pp > s->mtfbase[lno]) { |
| s->mtfa[pp] = s->mtfa[pp-1]; pp--; |
| }; |
| s->mtfbase[lno]++; |
| while (lno > 0) { |
| s->mtfbase[lno]--; |
| s->mtfa[s->mtfbase[lno]] |
| = s->mtfa[s->mtfbase[lno-1] + MTFL_SIZE - 1]; |
| lno--; |
| } |
| s->mtfbase[0]--; |
| s->mtfa[s->mtfbase[0]] = uc; |
| if (s->mtfbase[0] == 0) { |
| kk = MTFA_SIZE-1; |
| for (ii = 256 / MTFL_SIZE-1; ii >= 0; ii--) { |
| for (jj = MTFL_SIZE-1; jj >= 0; jj--) { |
| s->mtfa[kk] = s->mtfa[s->mtfbase[ii] + jj]; |
| kk--; |
| } |
| s->mtfbase[ii] = kk + 1; |
| } |
| } |
| } |
| } |
| /*-- end uc = MTF ( nextSym-1 ) --*/ |
| |
| s->unzftab[s->seqToUnseq[uc]]++; |
| if (s->smallDecompress) |
| s->ll16[nblock] = (UInt16)(s->seqToUnseq[uc]); else |
| s->tt[nblock] = (UInt32)(s->seqToUnseq[uc]); |
| nblock++; |
| |
| GET_MTF_VAL(BZ_X_MTF_5, BZ_X_MTF_6, nextSym); |
| continue; |
| } |
| } |
| |
| /* Now we know what nblock is, we can do a better sanity |
| check on s->origPtr. |
| */ |
| if (s->origPtr < 0 || s->origPtr >= nblock) |
| RETURN(BZ_DATA_ERROR); |
| |
| /*-- Set up cftab to facilitate generation of T^(-1) --*/ |
| s->cftab[0] = 0; |
| for (i = 1; i <= 256; i++) s->cftab[i] = s->unzftab[i-1]; |
| for (i = 1; i <= 256; i++) s->cftab[i] += s->cftab[i-1]; |
| for (i = 0; i <= 256; i++) { |
| if (s->cftab[i] < 0 || s->cftab[i] > nblock) { |
| /* s->cftab[i] can legitimately be == nblock */ |
| RETURN(BZ_DATA_ERROR); |
| } |
| } |
| |
| s->state_out_len = 0; |
| s->state_out_ch = 0; |
| BZ_INITIALISE_CRC ( s->calculatedBlockCRC ); |
| s->state = BZ_X_OUTPUT; |
| if (s->verbosity >= 2) VPrintf0 ( "rt+rld" ); |
| |
| if (s->smallDecompress) { |
| |
| /*-- Make a copy of cftab, used in generation of T --*/ |
| for (i = 0; i <= 256; i++) s->cftabCopy[i] = s->cftab[i]; |
| |
| /*-- compute the T vector --*/ |
| for (i = 0; i < nblock; i++) { |
| uc = (UChar)(s->ll16[i]); |
| SET_LL(i, s->cftabCopy[uc]); |
| s->cftabCopy[uc]++; |
| } |
| |
| /*-- Compute T^(-1) by pointer reversal on T --*/ |
| i = s->origPtr; |
| j = GET_LL(i); |
| do { |
| Int32 tmp = GET_LL(j); |
| SET_LL(j, i); |
| i = j; |
| j = tmp; |
| } |
| while (i != s->origPtr); |
| |
| s->tPos = s->origPtr; |
| s->nblock_used = 0; |
| if (s->blockRandomised) { |
| BZ_RAND_INIT_MASK; |
| BZ_GET_SMALL(s->k0); s->nblock_used++; |
| BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK; |
| } else { |
| BZ_GET_SMALL(s->k0); s->nblock_used++; |
| } |
| |
| } else { |
| |
| /*-- compute the T^(-1) vector --*/ |
| for (i = 0; i < nblock; i++) { |
| uc = (UChar)(s->tt[i] & 0xff); |
| s->tt[s->cftab[uc]] |= (i << 8); |
| s->cftab[uc]++; |
| } |
| |
| s->tPos = s->tt[s->origPtr] >> 8; |
| s->nblock_used = 0; |
| if (s->blockRandomised) { |
| BZ_RAND_INIT_MASK; |
| BZ_GET_FAST(s->k0); s->nblock_used++; |
| BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK; |
| } else { |
| BZ_GET_FAST(s->k0); s->nblock_used++; |
| } |
| |
| } |
| |
| RETURN(BZ_OK); |
| |
| |
| |
| endhdr_2: |
| |
| GET_UCHAR(BZ_X_ENDHDR_2, uc); |
| if (uc != 0x72) RETURN(BZ_DATA_ERROR); |
| GET_UCHAR(BZ_X_ENDHDR_3, uc); |
| if (uc != 0x45) RETURN(BZ_DATA_ERROR); |
| GET_UCHAR(BZ_X_ENDHDR_4, uc); |
| if (uc != 0x38) RETURN(BZ_DATA_ERROR); |
| GET_UCHAR(BZ_X_ENDHDR_5, uc); |
| if (uc != 0x50) RETURN(BZ_DATA_ERROR); |
| GET_UCHAR(BZ_X_ENDHDR_6, uc); |
| if (uc != 0x90) RETURN(BZ_DATA_ERROR); |
| |
| s->storedCombinedCRC = 0; |
| GET_UCHAR(BZ_X_CCRC_1, uc); |
| s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc); |
| GET_UCHAR(BZ_X_CCRC_2, uc); |
| s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc); |
| GET_UCHAR(BZ_X_CCRC_3, uc); |
| s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc); |
| GET_UCHAR(BZ_X_CCRC_4, uc); |
| s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc); |
| |
| s->state = BZ_X_IDLE; |
| RETURN(BZ_STREAM_END); |
| |
| default: AssertH ( False, 4001 ); |
| } |
| |
| AssertH ( False, 4002 ); |
| |
| save_state_and_return: |
| |
| s->save_i = i; |
| s->save_j = j; |
| s->save_t = t; |
| s->save_alphaSize = alphaSize; |
| s->save_nGroups = nGroups; |
| s->save_nSelectors = nSelectors; |
| s->save_EOB = EOB; |
| s->save_groupNo = groupNo; |
| s->save_groupPos = groupPos; |
| s->save_nextSym = nextSym; |
| s->save_nblockMAX = nblockMAX; |
| s->save_nblock = nblock; |
| s->save_es = es; |
| s->save_N = N; |
| s->save_curr = curr; |
| s->save_zt = zt; |
| s->save_zn = zn; |
| s->save_zvec = zvec; |
| s->save_zj = zj; |
| s->save_gSel = gSel; |
| s->save_gMinlen = gMinlen; |
| s->save_gLimit = gLimit; |
| s->save_gBase = gBase; |
| s->save_gPerm = gPerm; |
| |
| return retVal; |
| } |
| |
| |
| /*-------------------------------------------------------------*/ |
| /*--- end decompress.c ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| /*-------------------------------------------------------------*/ |
| /*--- Block sorting machinery ---*/ |
| /*--- blocksort.c ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| /*-- |
| This file is a part of bzip2 and/or libbzip2, a program and |
| library for lossless, block-sorting data compression. |
| |
| Copyright (C) 1996-2004 Julian R Seward. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| 1. Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| |
| 2. The origin of this software must not be misrepresented; you must |
| not claim that you wrote the original software. If you use this |
| software in a product, an acknowledgment in the product |
| documentation would be appreciated but is not required. |
| |
| 3. Altered source versions must be plainly marked as such, and must |
| not be misrepresented as being the original software. |
| |
| 4. The name of the author may not be used to endorse or promote |
| products derived from this software without specific prior written |
| permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS |
| OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| Julian Seward, Cambridge, UK. |
| jseward@bzip.org |
| bzip2/libbzip2 version 1.0 of 21 March 2000 |
| |
| This program is based on (at least) the work of: |
| Mike Burrows |
| David Wheeler |
| Peter Fenwick |
| Alistair Moffat |
| Radford Neal |
| Ian H. Witten |
| Robert Sedgewick |
| Jon L. Bentley |
| |
| For more information on these sources, see the manual. |
| |
| To get some idea how the block sorting algorithms in this file |
| work, read my paper |
| On the Performance of BWT Sorting Algorithms |
| in Proceedings of the IEEE Data Compression Conference 2000, |
| Snowbird, Utah, USA, 27-30 March 2000. The main sort in this |
| file implements the algorithm called cache in the paper. |
| --*/ |
| |
| |
| |
| /*---------------------------------------------*/ |
| /*--- Fallback O(N log(N)^2) sorting ---*/ |
| /*--- algorithm, for repetitive blocks ---*/ |
| /*---------------------------------------------*/ |
| |
| /*---------------------------------------------*/ |
| static |
| __inline__ |
| void fallbackSimpleSort ( UInt32* fmap, |
| UInt32* eclass, |
| Int32 lo, |
| Int32 hi ) |
| { |
| Int32 i, j, tmp; |
| UInt32 ec_tmp; |
| |
| if (lo == hi) return; |
| |
| if (hi - lo > 3) { |
| for ( i = hi-4; i >= lo; i-- ) { |
| tmp = fmap[i]; |
| ec_tmp = eclass[tmp]; |
| for ( j = i+4; j <= hi && ec_tmp > eclass[fmap[j]]; j += 4 ) |
| fmap[j-4] = fmap[j]; |
| fmap[j-4] = tmp; |
| } |
| } |
| |
| for ( i = hi-1; i >= lo; i-- ) { |
| tmp = fmap[i]; |
| ec_tmp = eclass[tmp]; |
| for ( j = i+1; j <= hi && ec_tmp > eclass[fmap[j]]; j++ ) |
| fmap[j-1] = fmap[j]; |
| fmap[j-1] = tmp; |
| } |
| } |
| |
| |
| /*---------------------------------------------*/ |
| #define fswap(zz1, zz2) \ |
| { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; } |
| |
| #define fvswap(zzp1, zzp2, zzn) \ |
| { \ |
| Int32 yyp1 = (zzp1); \ |
| Int32 yyp2 = (zzp2); \ |
| Int32 yyn = (zzn); \ |
| while (yyn > 0) { \ |
| fswap(fmap[yyp1], fmap[yyp2]); \ |
| yyp1++; yyp2++; yyn--; \ |
| } \ |
| } |
| |
| |
| #define fmin(a,b) ((a) < (b)) ? (a) : (b) |
| |
| #define fpush(lz,hz) { stackLo[sp] = lz; \ |
| stackHi[sp] = hz; \ |
| sp++; } |
| |
| #define fpop(lz,hz) { sp--; \ |
| lz = stackLo[sp]; \ |
| hz = stackHi[sp]; } |
| |
| #define FALLBACK_QSORT_SMALL_THRESH 10 |
| #define FALLBACK_QSORT_STACK_SIZE 100 |
| |
| |
| static |
| void fallbackQSort3 ( UInt32* fmap, |
| UInt32* eclass, |
| Int32 loSt, |
| Int32 hiSt ) |
| { |
| Int32 unLo, unHi, ltLo, gtHi, n, m; |
| Int32 sp, lo, hi; |
| UInt32 med, r, r3; |
| Int32 stackLo[FALLBACK_QSORT_STACK_SIZE]; |
| Int32 stackHi[FALLBACK_QSORT_STACK_SIZE]; |
| |
| r = 0; |
| |
| sp = 0; |
| fpush ( loSt, hiSt ); |
| |
| while (sp > 0) { |
| |
| AssertH ( sp < FALLBACK_QSORT_STACK_SIZE, 1004 ); |
| |
| fpop ( lo, hi ); |
| if (hi - lo < FALLBACK_QSORT_SMALL_THRESH) { |
| fallbackSimpleSort ( fmap, eclass, lo, hi ); |
| continue; |
| } |
| |
| /* Random partitioning. Median of 3 sometimes fails to |
| avoid bad cases. Median of 9 seems to help but |
| looks rather expensive. This too seems to work but |
| is cheaper. Guidance for the magic constants |
| 7621 and 32768 is taken from Sedgewick's algorithms |
| book, chapter 35. |
| */ |
| r = ((r * 7621) + 1) % 32768; |
| r3 = r % 3; |
| if (r3 == 0) med = eclass[fmap[lo]]; else |
| if (r3 == 1) med = eclass[fmap[(lo+hi)>>1]]; else |
| med = eclass[fmap[hi]]; |
| |
| unLo = ltLo = lo; |
| unHi = gtHi = hi; |
| |
| while (1) { |
| while (1) { |
| if (unLo > unHi) break; |
| n = (Int32)eclass[fmap[unLo]] - (Int32)med; |
| if (n == 0) { |
| fswap(fmap[unLo], fmap[ltLo]); |
| ltLo++; unLo++; |
| continue; |
| }; |
| if (n > 0) break; |
| unLo++; |
| } |
| while (1) { |
| if (unLo > unHi) break; |
| n = (Int32)eclass[fmap[unHi]] - (Int32)med; |
| if (n == 0) { |
| fswap(fmap[unHi], fmap[gtHi]); |
| gtHi--; unHi--; |
| continue; |
| }; |
| if (n < 0) break; |
| unHi--; |
| } |
| if (unLo > unHi) break; |
| fswap(fmap[unLo], fmap[unHi]); unLo++; unHi--; |
| } |
| |
| AssertD ( unHi == unLo-1, "fallbackQSort3(2)" ); |
| |
| if (gtHi < ltLo) continue; |
| |
| n = fmin(ltLo-lo, unLo-ltLo); fvswap(lo, unLo-n, n); |
| m = fmin(hi-gtHi, gtHi-unHi); fvswap(unLo, hi-m+1, m); |
| |
| n = lo + unLo - ltLo - 1; |
| m = hi - (gtHi - unHi) + 1; |
| |
| if (n - lo > hi - m) { |
| fpush ( lo, n ); |
| fpush ( m, hi ); |
| } else { |
| fpush ( m, hi ); |
| fpush ( lo, n ); |
| } |
| } |
| } |
| |
| #undef fmin |
| #undef fpush |
| #undef fpop |
| #undef fswap |
| #undef fvswap |
| #undef FALLBACK_QSORT_SMALL_THRESH |
| #undef FALLBACK_QSORT_STACK_SIZE |
| |
| |
| /*---------------------------------------------*/ |
| /* Pre: |
| nblock > 0 |
| eclass exists for [0 .. nblock-1] |
| ((UChar*)eclass) [0 .. nblock-1] holds block |
| ptr exists for [0 .. nblock-1] |
| |
| Post: |
| ((UChar*)eclass) [0 .. nblock-1] holds block |
| All other areas of eclass destroyed |
| fmap [0 .. nblock-1] holds sorted order |
| bhtab [ 0 .. 2+(nblock/32) ] destroyed |
| */ |
| |
| #define SET_BH(zz) bhtab[(zz) >> 5] |= (1 << ((zz) & 31)) |
| #define CLEAR_BH(zz) bhtab[(zz) >> 5] &= ~(1 << ((zz) & 31)) |
| #define ISSET_BH(zz) (bhtab[(zz) >> 5] & (1 << ((zz) & 31))) |
| #define WORD_BH(zz) bhtab[(zz) >> 5] |
| #define UNALIGNED_BH(zz) ((zz) & 0x01f) |
| |
| static |
| void fallbackSort ( UInt32* fmap, |
| UInt32* eclass, |
| UInt32* bhtab, |
| Int32 nblock, |
| Int32 verb ) |
| { |
| Int32 ftab[257]; |
| Int32 ftabCopy[256]; |
| Int32 H, i, j, k, l, r, cc, cc1; |
| Int32 nNotDone; |
| Int32 nBhtab; |
| UChar* eclass8 = (UChar*)eclass; |
| |
| /*-- |
| Initial 1-char radix sort to generate |
| initial fmap and initial BH bits. |
| --*/ |
| if (verb >= 4) |
| VPrintf0 ( " bucket sorting ...\n" ); |
| for (i = 0; i < 257; i++) ftab[i] = 0; |
| for (i = 0; i < nblock; i++) ftab[eclass8[i]]++; |
| for (i = 0; i < 256; i++) ftabCopy[i] = ftab[i]; |
| for (i = 1; i < 257; i++) ftab[i] += ftab[i-1]; |
| |
| for (i = 0; i < nblock; i++) { |
| j = eclass8[i]; |
| k = ftab[j] - 1; |
| ftab[j] = k; |
| fmap[k] = i; |
| } |
| |
| nBhtab = 2 + (nblock / 32); |
| for (i = 0; i < nBhtab; i++) bhtab[i] = 0; |
| for (i = 0; i < 256; i++) SET_BH(ftab[i]); |
| |
| /*-- |
| Inductively refine the buckets. Kind-of an |
| "exponential radix sort" (!), inspired by the |
| Manber-Myers suffix array construction algorithm. |
| --*/ |
| |
| /*-- set sentinel bits for block-end detection --*/ |
| for (i = 0; i < 32; i++) { |
| SET_BH(nblock + 2*i); |
| CLEAR_BH(nblock + 2*i + 1); |
| } |
| |
| /*-- the log(N) loop --*/ |
| H = 1; |
| while (1) { |
| |
| if (verb >= 4) |
| VPrintf1 ( " depth %6d has ", H ); |
| |
| j = 0; |
| for (i = 0; i < nblock; i++) { |
| if (ISSET_BH(i)) j = i; |
| k = fmap[i] - H; if (k < 0) k += nblock; |
| eclass[k] = j; |
| } |
| |
| nNotDone = 0; |
| r = -1; |
| while (1) { |
| |
| /*-- find the next non-singleton bucket --*/ |
| k = r + 1; |
| while (ISSET_BH(k) && UNALIGNED_BH(k)) k++; |
| if (ISSET_BH(k)) { |
| while (WORD_BH(k) == 0xffffffff) k += 32; |
| while (ISSET_BH(k)) k++; |
| } |
| l = k - 1; |
| if (l >= nblock) break; |
| while (!ISSET_BH(k) && UNALIGNED_BH(k)) k++; |
| if (!ISSET_BH(k)) { |
| while (WORD_BH(k) == 0x00000000) k += 32; |
| while (!ISSET_BH(k)) k++; |
| } |
| r = k - 1; |
| if (r >= nblock) break; |
| |
| /*-- now [l, r] bracket current bucket --*/ |
| if (r > l) { |
| nNotDone += (r - l + 1); |
| fallbackQSort3 ( fmap, eclass, l, r ); |
| |
| /*-- scan bucket and generate header bits-- */ |
| cc = -1; |
| for (i = l; i <= r; i++) { |
| cc1 = eclass[fmap[i]]; |
| if (cc != cc1) { SET_BH(i); cc = cc1; }; |
| } |
| } |
| } |
| |
| if (verb >= 4) |
| VPrintf1 ( "%6d unresolved strings\n", nNotDone ); |
| |
| H *= 2; |
| if (H > nblock || nNotDone == 0) break; |
| } |
| |
| /*-- |
| Reconstruct the original block in |
| eclass8 [0 .. nblock-1], since the |
| previous phase destroyed it. |
| --*/ |
| if (verb >= 4) |
| VPrintf0 ( " reconstructing block ...\n" ); |
| j = 0; |
| for (i = 0; i < nblock; i++) { |
| while (ftabCopy[j] == 0) j++; |
| ftabCopy[j]--; |
| eclass8[fmap[i]] = (UChar)j; |
| } |
| AssertH ( j < 256, 1005 ); |
| } |
| |
| #undef SET_BH |
| #undef CLEAR_BH |
| #undef ISSET_BH |
| #undef WORD_BH |
| #undef UNALIGNED_BH |
| |
| |
| /*---------------------------------------------*/ |
| /*--- The main, O(N^2 log(N)) sorting ---*/ |
| /*--- algorithm. Faster for "normal" ---*/ |
| /*--- non-repetitive blocks. ---*/ |
| /*---------------------------------------------*/ |
| |
| /*---------------------------------------------*/ |
| static |
| __inline__ |
| Bool mainGtU ( UInt32 i1, |
| UInt32 i2, |
| UChar* block, |
| UInt16* quadrant, |
| UInt32 nblock, |
| Int32* budget ) |
| { |
| Int32 k; |
| UChar c1, c2; |
| UInt16 s1, s2; |
| |
| AssertD ( i1 != i2, "mainGtU" ); |
| /* 1 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| i1++; i2++; |
| /* 2 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| i1++; i2++; |
| /* 3 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| i1++; i2++; |
| /* 4 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| i1++; i2++; |
| /* 5 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| i1++; i2++; |
| /* 6 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| i1++; i2++; |
| /* 7 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| i1++; i2++; |
| /* 8 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| i1++; i2++; |
| /* 9 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| i1++; i2++; |
| /* 10 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| i1++; i2++; |
| /* 11 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| i1++; i2++; |
| /* 12 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| i1++; i2++; |
| |
| k = nblock + 8; |
| |
| do { |
| /* 1 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| s1 = quadrant[i1]; s2 = quadrant[i2]; |
| if (s1 != s2) return (s1 > s2); |
| i1++; i2++; |
| /* 2 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| s1 = quadrant[i1]; s2 = quadrant[i2]; |
| if (s1 != s2) return (s1 > s2); |
| i1++; i2++; |
| /* 3 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| s1 = quadrant[i1]; s2 = quadrant[i2]; |
| if (s1 != s2) return (s1 > s2); |
| i1++; i2++; |
| /* 4 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| s1 = quadrant[i1]; s2 = quadrant[i2]; |
| if (s1 != s2) return (s1 > s2); |
| i1++; i2++; |
| /* 5 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| s1 = quadrant[i1]; s2 = quadrant[i2]; |
| if (s1 != s2) return (s1 > s2); |
| i1++; i2++; |
| /* 6 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| s1 = quadrant[i1]; s2 = quadrant[i2]; |
| if (s1 != s2) return (s1 > s2); |
| i1++; i2++; |
| /* 7 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| s1 = quadrant[i1]; s2 = quadrant[i2]; |
| if (s1 != s2) return (s1 > s2); |
| i1++; i2++; |
| /* 8 */ |
| c1 = block[i1]; c2 = block[i2]; |
| if (c1 != c2) return (c1 > c2); |
| s1 = quadrant[i1]; s2 = quadrant[i2]; |
| if (s1 != s2) return (s1 > s2); |
| i1++; i2++; |
| |
| if (i1 >= nblock) i1 -= nblock; |
| if (i2 >= nblock) i2 -= nblock; |
| |
| k -= 8; |
| (*budget)--; |
| } |
| while (k >= 0); |
| |
| return False; |
| } |
| |
| |
| /*---------------------------------------------*/ |
| /*-- |
| Knuth's increments seem to work better |
| than Incerpi-Sedgewick here. Possibly |
| because the number of elems to sort is |
| usually small, typically <= 20. |
| --*/ |
| static |
| Int32 incs[14] = { 1, 4, 13, 40, 121, 364, 1093, 3280, |
| 9841, 29524, 88573, 265720, |
| 797161, 2391484 }; |
| |
| static |
| void mainSimpleSort ( UInt32* ptr, |
| UChar* block, |
| UInt16* quadrant, |
| Int32 nblock, |
| Int32 lo, |
| Int32 hi, |
| Int32 d, |
| Int32* budget ) |
| { |
| Int32 i, j, h, bigN, hp; |
| UInt32 v; |
| |
| bigN = hi - lo + 1; |
| if (bigN < 2) return; |
| |
| hp = 0; |
| while (incs[hp] < bigN) hp++; |
| hp--; |
| |
| for (; hp >= 0; hp--) { |
| h = incs[hp]; |
| |
| i = lo + h; |
| while (True) { |
| |
| /*-- copy 1 --*/ |
| if (i > hi) break; |
| v = ptr[i]; |
| j = i; |
| while ( mainGtU ( |
| ptr[j-h]+d, v+d, block, quadrant, nblock, budget |
| ) ) { |
| ptr[j] = ptr[j-h]; |
| j = j - h; |
| if (j <= (lo + h - 1)) break; |
| } |
| ptr[j] = v; |
| i++; |
| |
| /*-- copy 2 --*/ |
| if (i > hi) break; |
| v = ptr[i]; |
| j = i; |
| while ( mainGtU ( |
| ptr[j-h]+d, v+d, block, quadrant, nblock, budget |
| ) ) { |
| ptr[j] = ptr[j-h]; |
| j = j - h; |
| if (j <= (lo + h - 1)) break; |
| } |
| ptr[j] = v; |
| i++; |
| |
| /*-- copy 3 --*/ |
| if (i > hi) break; |
| v = ptr[i]; |
| j = i; |
| while ( mainGtU ( |
| ptr[j-h]+d, v+d, block, quadrant, nblock, budget |
| ) ) { |
| ptr[j] = ptr[j-h]; |
| j = j - h; |
| if (j <= (lo + h - 1)) break; |
| } |
| ptr[j] = v; |
| i++; |
| |
| if (*budget < 0) return; |
| } |
| } |
| } |
| |
| |
| /*---------------------------------------------*/ |
| /*-- |
| The following is an implementation of |
| an elegant 3-way quicksort for strings, |
| described in a paper "Fast Algorithms for |
| Sorting and Searching Strings", by Robert |
| Sedgewick and Jon L. Bentley. |
| --*/ |
| |
| #define mswap(zz1, zz2) \ |
| { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; } |
| |
| #define mvswap(zzp1, zzp2, zzn) \ |
| { \ |
| Int32 yyp1 = (zzp1); \ |
| Int32 yyp2 = (zzp2); \ |
| Int32 yyn = (zzn); \ |
| while (yyn > 0) { \ |
| mswap(ptr[yyp1], ptr[yyp2]); \ |
| yyp1++; yyp2++; yyn--; \ |
| } \ |
| } |
| |
| static |
| __inline__ |
| UChar mmed3 ( UChar a, UChar b, UChar c ) |
| { |
| UChar t; |
| if (a > b) { t = a; a = b; b = t; }; |
| if (b > c) { |
| b = c; |
| if (a > b) b = a; |
| } |
| return b; |
| } |
| |
| #define mmin(a,b) ((a) < (b)) ? (a) : (b) |
| |
| #define mpush(lz,hz,dz) { stackLo[sp] = lz; \ |
| stackHi[sp] = hz; \ |
| stackD [sp] = dz; \ |
| sp++; } |
| |
| #define mpop(lz,hz,dz) { sp--; \ |
| lz = stackLo[sp]; \ |
| hz = stackHi[sp]; \ |
| dz = stackD [sp]; } |
| |
| |
| #define mnextsize(az) (nextHi[az]-nextLo[az]) |
| |
| #define mnextswap(az,bz) \ |
| { Int32 tz; \ |
| tz = nextLo[az]; nextLo[az] = nextLo[bz]; nextLo[bz] = tz; \ |
| tz = nextHi[az]; nextHi[az] = nextHi[bz]; nextHi[bz] = tz; \ |
| tz = nextD [az]; nextD [az] = nextD [bz]; nextD [bz] = tz; } |
| |
| |
| #define MAIN_QSORT_SMALL_THRESH 20 |
| #define MAIN_QSORT_DEPTH_THRESH (BZ_N_RADIX + BZ_N_QSORT) |
| #define MAIN_QSORT_STACK_SIZE 100 |
| |
| static |
| void mainQSort3 ( UInt32* ptr, |
| UChar* block, |
| UInt16* quadrant, |
| Int32 nblock, |
| Int32 loSt, |
| Int32 hiSt, |
| Int32 dSt, |
| Int32* budget ) |
| { |
| Int32 unLo, unHi, ltLo, gtHi, n, m, med; |
| Int32 sp, lo, hi, d; |
| |
| Int32 stackLo[MAIN_QSORT_STACK_SIZE]; |
| Int32 stackHi[MAIN_QSORT_STACK_SIZE]; |
| Int32 stackD [MAIN_QSORT_STACK_SIZE]; |
| |
| Int32 nextLo[3]; |
| Int32 nextHi[3]; |
| Int32 nextD [3]; |
| |
| sp = 0; |
| mpush ( loSt, hiSt, dSt ); |
| |
| while (sp > 0) { |
| |
| AssertH ( sp < MAIN_QSORT_STACK_SIZE, 1001 ); |
| |
| mpop ( lo, hi, d ); |
| if (hi - lo < MAIN_QSORT_SMALL_THRESH || |
| d > MAIN_QSORT_DEPTH_THRESH) { |
| mainSimpleSort ( ptr, block, quadrant, nblock, lo, hi, d, budget ); |
| if (*budget < 0) return; |
| continue; |
| } |
| |
| med = (Int32) |
| mmed3 ( block[ptr[ lo ]+d], |
| block[ptr[ hi ]+d], |
| block[ptr[ (lo+hi)>>1 ]+d] ); |
| |
| unLo = ltLo = lo; |
| unHi = gtHi = hi; |
| |
| while (True) { |
| while (True) { |
| if (unLo > unHi) break; |
| n = ((Int32)block[ptr[unLo]+d]) - med; |
| if (n == 0) { |
| mswap(ptr[unLo], ptr[ltLo]); |
| ltLo++; unLo++; continue; |
| }; |
| if (n > 0) break; |
| unLo++; |
| } |
| while (True) { |
| if (unLo > unHi) break; |
| n = ((Int32)block[ptr[unHi]+d]) - med; |
| if (n == 0) { |
| mswap(ptr[unHi], ptr[gtHi]); |
| gtHi--; unHi--; continue; |
| }; |
| if (n < 0) break; |
| unHi--; |
| } |
| if (unLo > unHi) break; |
| mswap(ptr[unLo], ptr[unHi]); unLo++; unHi--; |
| } |
| |
| AssertD ( unHi == unLo-1, "mainQSort3(2)" ); |
| |
| if (gtHi < ltLo) { |
| mpush(lo, hi, d+1 ); |
| continue; |
| } |
| |
| n = mmin(ltLo-lo, unLo-ltLo); mvswap(lo, unLo-n, n); |
| m = mmin(hi-gtHi, gtHi-unHi); mvswap(unLo, hi-m+1, m); |
| |
| n = lo + unLo - ltLo - 1; |
| m = hi - (gtHi - unHi) + 1; |
| |
| nextLo[0] = lo; nextHi[0] = n; nextD[0] = d; |
| nextLo[1] = m; nextHi[1] = hi; nextD[1] = d; |
| nextLo[2] = n+1; nextHi[2] = m-1; nextD[2] = d+1; |
| |
| if (mnextsize(0) < mnextsize(1)) mnextswap(0,1); |
| if (mnextsize(1) < mnextsize(2)) mnextswap(1,2); |
| if (mnextsize(0) < mnextsize(1)) mnextswap(0,1); |
| |
| AssertD (mnextsize(0) >= mnextsize(1), "mainQSort3(8)" ); |
| AssertD (mnextsize(1) >= mnextsize(2), "mainQSort3(9)" ); |
| |
| mpush (nextLo[0], nextHi[0], nextD[0]); |
| mpush (nextLo[1], nextHi[1], nextD[1]); |
| mpush (nextLo[2], nextHi[2], nextD[2]); |
| } |
| } |
| |
| #undef mswap |
| #undef mvswap |
| #undef mpush |
| #undef mpop |
| #undef mmin |
| #undef mnextsize |
| #undef mnextswap |
| #undef MAIN_QSORT_SMALL_THRESH |
| #undef MAIN_QSORT_DEPTH_THRESH |
| #undef MAIN_QSORT_STACK_SIZE |
| |
| |
| /*---------------------------------------------*/ |
| /* Pre: |
| nblock > N_OVERSHOOT |
| block32 exists for [0 .. nblock-1 +N_OVERSHOOT] |
| ((UChar*)block32) [0 .. nblock-1] holds block |
| ptr exists for [0 .. nblock-1] |
| |
| Post: |
| ((UChar*)block32) [0 .. nblock-1] holds block |
| All other areas of block32 destroyed |
| ftab [0 .. 65536 ] destroyed |
| ptr [0 .. nblock-1] holds sorted order |
| if (*budget < 0), sorting was abandoned |
| */ |
| |
| #define BIGFREQ(b) (ftab[((b)+1) << 8] - ftab[(b) << 8]) |
| #define SETMASK (1 << 21) |
| #define CLEARMASK (~(SETMASK)) |
| |
| static |
| void mainSort ( UInt32* ptr, |
| UChar* block, |
| UInt16* quadrant, |
| UInt32* ftab, |
| Int32 nblock, |
| Int32 verb, |
| Int32* budget ) |
| { |
| Int32 i, j, k, ss, sb; |
| Int32 runningOrder[256]; |
| Bool bigDone[256]; |
| Int32 copyStart[256]; |
| Int32 copyEnd [256]; |
| UChar c1; |
| Int32 numQSorted; |
| UInt16 s; |
| if (verb >= 4) VPrintf0 ( " main sort initialise ...\n" ); |
| |
| /*-- set up the 2-byte frequency table --*/ |
| for (i = 65536; i >= 0; i--) ftab[i] = 0; |
| |
| j = block[0] << 8; |
| i = nblock-1; |
| for (; i >= 3; i -= 4) { |
| quadrant[i] = 0; |
| j = (j >> 8) | ( ((UInt16)block[i]) << 8); |
| ftab[j]++; |
| quadrant[i-1] = 0; |
| j = (j >> 8) | ( ((UInt16)block[i-1]) << 8); |
| ftab[j]++; |
| quadrant[i-2] = 0; |
| j = (j >> 8) | ( ((UInt16)block[i-2]) << 8); |
| ftab[j]++; |
| quadrant[i-3] = 0; |
| j = (j >> 8) | ( ((UInt16)block[i-3]) << 8); |
| ftab[j]++; |
| } |
| for (; i >= 0; i--) { |
| quadrant[i] = 0; |
| j = (j >> 8) | ( ((UInt16)block[i]) << 8); |
| ftab[j]++; |
| } |
| |
| /*-- (emphasises close relationship of block & quadrant) --*/ |
| for (i = 0; i < BZ_N_OVERSHOOT; i++) { |
| block [nblock+i] = block[i]; |
| quadrant[nblock+i] = 0; |
| } |
| |
| if (verb >= 4) VPrintf0 ( " bucket sorting ...\n" ); |
| |
| /*-- Complete the initial radix sort --*/ |
| for (i = 1; i <= 65536; i++) ftab[i] += ftab[i-1]; |
| |
| s = block[0] << 8; |
| i = nblock-1; |
| for (; i >= 3; i -= 4) { |
| s = (s >> 8) | (block[i] << 8); |
| j = ftab[s] -1; |
| ftab[s] = j; |
| ptr[j] = i; |
| s = (s >> 8) | (block[i-1] << 8); |
| j = ftab[s] -1; |
| ftab[s] = j; |
| ptr[j] = i-1; |
| s = (s >> 8) | (block[i-2] << 8); |
| j = ftab[s] -1; |
| ftab[s] = j; |
| ptr[j] = i-2; |
| s = (s >> 8) | (block[i-3] << 8); |
| j = ftab[s] -1; |
| ftab[s] = j; |
| ptr[j] = i-3; |
| } |
| for (; i >= 0; i--) { |
| s = (s >> 8) | (block[i] << 8); |
| j = ftab[s] -1; |
| ftab[s] = j; |
| ptr[j] = i; |
| } |
| |
| /*-- |
| Now ftab contains the first loc of every small bucket. |
| Calculate the running order, from smallest to largest |
| big bucket. |
| --*/ |
| for (i = 0; i <= 255; i++) { |
| bigDone [i] = False; |
| runningOrder[i] = i; |
| } |
| |
| { |
| Int32 vv; |
| Int32 h = 1; |
| do h = 3 * h + 1; while (h <= 256); |
| do { |
| h = h / 3; |
| for (i = h; i <= 255; i++) { |
| vv = runningOrder[i]; |
| j = i; |
| while ( BIGFREQ(runningOrder[j-h]) > BIGFREQ(vv) ) { |
| runningOrder[j] = runningOrder[j-h]; |
| j = j - h; |
| if (j <= (h - 1)) goto zero; |
| } |
| zero: |
| runningOrder[j] = vv; |
| } |
| } while (h != 1); |
| } |
| |
| /*-- |
| The main sorting loop. |
| --*/ |
| |
| numQSorted = 0; |
| |
| for (i = 0; i <= 255; i++) { |
| |
| /*-- |
| Process big buckets, starting with the least full. |
| Basically this is a 3-step process in which we call |
| mainQSort3 to sort the small buckets [ss, j], but |
| also make a big effort to avoid the calls if we can. |
| --*/ |
| ss = runningOrder[i]; |
| |
| /*-- |
| Step 1: |
| Complete the big bucket [ss] by quicksorting |
| any unsorted small buckets [ss, j], for j != ss. |
| Hopefully previous pointer-scanning phases have already |
| completed many of the small buckets [ss, j], so |
| we don't have to sort them at all. |
| --*/ |
| for (j = 0; j <= 255; j++) { |
| if (j != ss) { |
| sb = (ss << 8) + j; |
| if ( ! (ftab[sb] & SETMASK) ) { |
| Int32 lo = ftab[sb] & CLEARMASK; |
| Int32 hi = (ftab[sb+1] & CLEARMASK) - 1; |
| if (hi > lo) { |
| if (verb >= 4) |
| VPrintf4 ( " qsort [0x%x, 0x%x] " |
| "done %d this %d\n", |
| ss, j, numQSorted, hi - lo + 1 ); |
| mainQSort3 ( |
| ptr, block, quadrant, nblock, |
| lo, hi, BZ_N_RADIX, budget |
| ); |
| numQSorted += (hi - lo + 1); |
| if (*budget < 0) return; |
| } |
| } |
| ftab[sb] |= SETMASK; |
| } |
| } |
| |
| AssertH ( !bigDone[ss], 1006 ); |
| |
| /*-- |
| Step 2: |
| Now scan this big bucket [ss] so as to synthesise the |
| sorted order for small buckets [t, ss] for all t, |
| including, magically, the bucket [ss,ss] too. |
| This will avoid doing Real Work in subsequent Step 1's. |
| --*/ |
| { |
| for (j = 0; j <= 255; j++) { |
| copyStart[j] = ftab[(j << 8) + ss] & CLEARMASK; |
| copyEnd [j] = (ftab[(j << 8) + ss + 1] & CLEARMASK) - 1; |
| } |
| for (j = ftab[ss << 8] & CLEARMASK; j < copyStart[ss]; j++) { |
| k = ptr[j]-1; if (k < 0) k += nblock; |
| c1 = block[k]; |
| if (!bigDone[c1]) |
| ptr[ copyStart[c1]++ ] = k; |
| } |
| for (j = (ftab[(ss+1) << 8] & CLEARMASK) - 1; j > copyEnd[ss]; j--) { |
| k = ptr[j]-1; if (k < 0) k += nblock; |
| c1 = block[k]; |
| if (!bigDone[c1]) |
| ptr[ copyEnd[c1]-- ] = k; |
| } |
| } |
| |
| AssertH ( (copyStart[ss]-1 == copyEnd[ss]) |
| || |
| /* Extremely rare case missing in bzip2-1.0.0 and 1.0.1. |
| Necessity for this case is demonstrated by compressing |
| a sequence of approximately 48.5 million of character |
| 251; 1.0.0/1.0.1 will then die here. */ |
| (copyStart[ss] == 0 && copyEnd[ss] == nblock-1), |
| 1007 ) |
| |
| for (j = 0; j <= 255; j++) ftab[(j << 8) + ss] |= SETMASK; |
| |
| /*-- |
| Step 3: |
| The [ss] big bucket is now done. Record this fact, |
| and update the quadrant descriptors. Remember to |
| update quadrants in the overshoot area too, if |
| necessary. The "if (i < 255)" test merely skips |
| this updating for the last bucket processed, since |
| updating for the last bucket is pointless. |
| |
| The quadrant array provides a way to incrementally |
| cache sort orderings, as they appear, so as to |
| make subsequent comparisons in fullGtU() complete |
| faster. For repetitive blocks this makes a big |
| difference (but not big enough to be able to avoid |
| the fallback sorting mechanism, exponential radix sort). |
| |
| The precise meaning is: at all times: |
| |
| for 0 <= i < nblock and 0 <= j <= nblock |
| |
| if block[i] != block[j], |
| |
| then the relative values of quadrant[i] and |
| quadrant[j] are meaningless. |
| |
| else { |
| if quadrant[i] < quadrant[j] |
| then the string starting at i lexicographically |
| precedes the string starting at j |
| |
| else if quadrant[i] > quadrant[j] |
| then the string starting at j lexicographically |
| precedes the string starting at i |
| |
| else |
| the relative ordering of the strings starting |
| at i and j has not yet been determined. |
| } |
| --*/ |
| bigDone[ss] = True; |
| |
| if (i < 255) { |
| Int32 bbStart = ftab[ss << 8] & CLEARMASK; |
| Int32 bbSize = (ftab[(ss+1) << 8] & CLEARMASK) - bbStart; |
| Int32 shifts = 0; |
| |
| while ((bbSize >> shifts) > 65534) shifts++; |
| |
| for (j = bbSize-1; j >= 0; j--) { |
| Int32 a2update = ptr[bbStart + j]; |
| UInt16 qVal = (UInt16)(j >> shifts); |
| quadrant[a2update] = qVal; |
| if (a2update < BZ_N_OVERSHOOT) |
| quadrant[a2update + nblock] = qVal; |
| } |
| AssertH ( ((bbSize-1) >> shifts) <= 65535, 1002 ); |
| } |
| |
| } |
| |
| if (verb >= 4) |
| VPrintf3 ( " %d pointers, %d sorted, %d scanned\n", |
| nblock, numQSorted, nblock - numQSorted ); |
| } |
| |
| #undef BIGFREQ |
| #undef SETMASK |
| #undef CLEARMASK |
| |
| |
| /*---------------------------------------------*/ |
| /* Pre: |
| nblock > 0 |
| arr2 exists for [0 .. nblock-1 +N_OVERSHOOT] |
| ((UChar*)arr2) [0 .. nblock-1] holds block |
| arr1 exists for [0 .. nblock-1] |
| |
| Post: |
| ((UChar*)arr2) [0 .. nblock-1] holds block |
| All other areas of block destroyed |
| ftab [ 0 .. 65536 ] destroyed |
| arr1 [0 .. nblock-1] holds sorted order |
| */ |
| void BZ2_blockSort ( EState* s ) |
| { |
| UInt32* ptr = s->ptr; |
| UChar* block = s->block; |
| UInt32* ftab = s->ftab; |
| Int32 nblock = s->nblock; |
| Int32 verb = s->verbosity; |
| Int32 wfact = s->workFactor; |
| UInt16* quadrant; |
| Int32 budget; |
| Int32 budgetInit; |
| Int32 i; |
| |
| if (nblock < /* 10000 */1000 ) { |
| fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb ); |
| } else { |
| /* Calculate the location for quadrant, remembering to get |
| the alignment right. Assumes that &(block[0]) is at least |
| 2-byte aligned -- this should be ok since block is really |
| the first section of arr2. |
| */ |
| i = nblock+BZ_N_OVERSHOOT; |
| if (i & 1) i++; |
| quadrant = (UInt16*)(&(block[i])); |
| |
| /* (wfact-1) / 3 puts the default-factor-30 |
| transition point at very roughly the same place as |
| with v0.1 and v0.9.0. |
| Not that it particularly matters any more, since the |
| resulting compressed stream is now the same regardless |
| of whether or not we use the main sort or fallback sort. |
| */ |
| if (wfact < 1 ) wfact = 1; |
| if (wfact > 100) wfact = 100; |
| budgetInit = nblock * ((wfact-1) / 3); |
| budget = budgetInit; |
| |
| mainSort ( ptr, block, quadrant, ftab, nblock, verb, &budget ); |
| if (0 && verb >= 3) |
| VPrintf3 ( " %d work, %d block, ratio %5.2f\n", |
| budgetInit - budget, |
| nblock, |
| (float)(budgetInit - budget) / |
| (float)(nblock==0 ? 1 : nblock) ); |
| if (budget < 0) { |
| if (verb >= 2) |
| VPrintf0 ( " too repetitive; using fallback" |
| " sorting algorithm\n" ); |
| fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb ); |
| } |
| } |
| |
| s->origPtr = -1; |
| for (i = 0; i < s->nblock; i++) |
| if (ptr[i] == 0) |
| { s->origPtr = i; break; }; |
| |
| AssertH( s->origPtr != -1, 1003 ); |
| } |
| |
| |
| /*-------------------------------------------------------------*/ |
| /*--- end blocksort.c ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| /*-------------------------------------------------------------*/ |
| /*--- Huffman coding low-level stuff ---*/ |
| /*--- huffman.c ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| /*-- |
| This file is a part of bzip2 and/or libbzip2, a program and |
| library for lossless, block-sorting data compression. |
| |
| Copyright (C) 1996-2004 Julian R Seward. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| 1. Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| |
| 2. The origin of this software must not be misrepresented; you must |
| not claim that you wrote the original software. If you use this |
| software in a product, an acknowledgment in the product |
| documentation would be appreciated but is not required. |
| |
| 3. Altered source versions must be plainly marked as such, and must |
| not be misrepresented as being the original software. |
| |
| 4. The name of the author may not be used to endorse or promote |
| products derived from this software without specific prior written |
| permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS |
| OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| Julian Seward, Cambridge, UK. |
| jseward@bzip.org |
| bzip2/libbzip2 version 1.0 of 21 March 2000 |
| |
| This program is based on (at least) the work of: |
| Mike Burrows |
| David Wheeler |
| Peter Fenwick |
| Alistair Moffat |
| Radford Neal |
| Ian H. Witten |
| Robert Sedgewick |
| Jon L. Bentley |
| |
| For more information on these sources, see the manual. |
| --*/ |
| |
| |
| |
| /*---------------------------------------------------*/ |
| #define WEIGHTOF(zz0) ((zz0) & 0xffffff00) |
| #define DEPTHOF(zz1) ((zz1) & 0x000000ff) |
| #define MYMAX(zz2,zz3) ((zz2) > (zz3) ? (zz2) : (zz3)) |
| |
| #define ADDWEIGHTS(zw1,zw2) \ |
| (WEIGHTOF(zw1)+WEIGHTOF(zw2)) | \ |
| (1 + MYMAX(DEPTHOF(zw1),DEPTHOF(zw2))) |
| |
| #define UPHEAP(z) \ |
| { \ |
| Int32 zz, tmp; \ |
| zz = z; tmp = heap[zz]; \ |
| while (weight[tmp] < weight[heap[zz >> 1]]) { \ |
| heap[zz] = heap[zz >> 1]; \ |
| zz >>= 1; \ |
| } \ |
| heap[zz] = tmp; \ |
| } |
| |
| #define DOWNHEAP(z) \ |
| { \ |
| Int32 zz, yy, tmp; \ |
| zz = z; tmp = heap[zz]; \ |
| while (True) { \ |
| yy = zz << 1; \ |
| if (yy > nHeap) break; \ |
| if (yy < nHeap && \ |
| weight[heap[yy+1]] < weight[heap[yy]]) \ |
| yy++; \ |
| if (weight[tmp] < weight[heap[yy]]) break; \ |
| heap[zz] = heap[yy]; \ |
| zz = yy; \ |
| } \ |
| heap[zz] = tmp; \ |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| void BZ2_hbMakeCodeLengths ( UChar *len, |
| Int32 *freq, |
| Int32 alphaSize, |
| Int32 maxLen ) |
| { |
| /*-- |
| Nodes and heap entries run from 1. Entry 0 |
| for both the heap and nodes is a sentinel. |
| --*/ |
| Int32 nNodes, nHeap, n1, n2, i, j, k; |
| Bool tooLong; |
| |
| Int32 heap [ BZ_MAX_ALPHA_SIZE + 2 ]; |
| Int32 weight [ BZ_MAX_ALPHA_SIZE * 2 ]; |
| Int32 parent [ BZ_MAX_ALPHA_SIZE * 2 ]; |
| |
| for (i = 0; i < alphaSize; i++) |
| weight[i+1] = (freq[i] == 0 ? 1 : freq[i]) << 8; |
| |
| while (True) { |
| |
| nNodes = alphaSize; |
| nHeap = 0; |
| |
| heap[0] = 0; |
| weight[0] = 0; |
| parent[0] = -2; |
| |
| for (i = 1; i <= alphaSize; i++) { |
| parent[i] = -1; |
| nHeap++; |
| heap[nHeap] = i; |
| UPHEAP(nHeap); |
| } |
| |
| AssertH( nHeap < (BZ_MAX_ALPHA_SIZE+2), 2001 ); |
| |
| while (nHeap > 1) { |
| n1 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1); |
| n2 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1); |
| nNodes++; |
| parent[n1] = parent[n2] = nNodes; |
| weight[nNodes] = ADDWEIGHTS(weight[n1], weight[n2]); |
| parent[nNodes] = -1; |
| nHeap++; |
| heap[nHeap] = nNodes; |
| UPHEAP(nHeap); |
| } |
| |
| AssertH( nNodes < (BZ_MAX_ALPHA_SIZE * 2), 2002 ); |
| |
| tooLong = False; |
| for (i = 1; i <= alphaSize; i++) { |
| j = 0; |
| k = i; |
| while (parent[k] >= 0) { k = parent[k]; j++; } |
| len[i-1] = j; |
| if (j > maxLen) tooLong = True; |
| } |
| |
| if (! tooLong) break; |
| |
| /* 17 Oct 04: keep-going condition for the following loop used |
| to be 'i < alphaSize', which missed the last element, |
| theoretically leading to the possibility of the compressor |
| looping. However, this count-scaling step is only needed if |
| one of the generated Huffman code words is longer than |
| maxLen, which up to and including version 1.0.2 was 20 bits, |
| which is extremely unlikely. In version 1.0.3 maxLen was |
| changed to 17 bits, which has minimal effect on compression |
| ratio, but does mean this scaling step is used from time to |
| time, enough to verify that it works. |
| |
| This means that bzip2-1.0.3 and later will only produce |
| Huffman codes with a maximum length of 17 bits. However, in |
| order to preserve backwards compatibility with bitstreams |
| produced by versions pre-1.0.3, the decompressor must still |
| handle lengths of up to 20. */ |
| |
| for (i = 1; i <= alphaSize; i++) { |
| j = weight[i] >> 8; |
| j = 1 + (j / 2); |
| weight[i] = j << 8; |
| } |
| } |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| void BZ2_hbAssignCodes ( Int32 *code, |
| UChar *length, |
| Int32 minLen, |
| Int32 maxLen, |
| Int32 alphaSize ) |
| { |
| Int32 n, vec, i; |
| |
| vec = 0; |
| for (n = minLen; n <= maxLen; n++) { |
| for (i = 0; i < alphaSize; i++) |
| if (length[i] == n) { code[i] = vec; vec++; }; |
| vec <<= 1; |
| } |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| void BZ2_hbCreateDecodeTables ( Int32 *limit, |
| Int32 *base, |
| Int32 *perm, |
| UChar *length, |
| Int32 minLen, |
| Int32 maxLen, |
| Int32 alphaSize ) |
| { |
| Int32 pp, i, j, vec; |
| |
| pp = 0; |
| for (i = minLen; i <= maxLen; i++) |
| for (j = 0; j < alphaSize; j++) |
| if (length[j] == i) { perm[pp] = j; pp++; }; |
| |
| for (i = 0; i < BZ_MAX_CODE_LEN; i++) base[i] = 0; |
| for (i = 0; i < alphaSize; i++) base[length[i]+1]++; |
| |
| for (i = 1; i < BZ_MAX_CODE_LEN; i++) base[i] += base[i-1]; |
| |
| for (i = 0; i < BZ_MAX_CODE_LEN; i++) limit[i] = 0; |
| vec = 0; |
| |
| for (i = minLen; i <= maxLen; i++) { |
| vec += (base[i+1] - base[i]); |
| limit[i] = vec-1; |
| vec <<= 1; |
| } |
| for (i = minLen + 1; i <= maxLen; i++) |
| base[i] = ((limit[i-1] + 1) << 1) - base[i]; |
| } |
| |
| |
| /*-------------------------------------------------------------*/ |
| /*--- end huffman.c ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| /*-------------------------------------------------------------*/ |
| /*--- Compression machinery (not incl block sorting) ---*/ |
| /*--- compress.c ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| /*-- |
| This file is a part of bzip2 and/or libbzip2, a program and |
| library for lossless, block-sorting data compression. |
| |
| Copyright (C) 1996-2004 Julian R Seward. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| 1. Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| |
| 2. The origin of this software must not be misrepresented; you must |
| not claim that you wrote the original software. If you use this |
| software in a product, an acknowledgment in the product |
| documentation would be appreciated but is not required. |
| |
| 3. Altered source versions must be plainly marked as such, and must |
| not be misrepresented as being the original software. |
| |
| 4. The name of the author may not be used to endorse or promote |
| products derived from this software without specific prior written |
| permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS |
| OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| Julian Seward, Cambridge, UK. |
| jseward@bzip.org |
| bzip2/libbzip2 version 1.0 of 21 March 2000 |
| |
| This program is based on (at least) the work of: |
| Mike Burrows |
| David Wheeler |
| Peter Fenwick |
| Alistair Moffat |
| Radford Neal |
| Ian H. Witten |
| Robert Sedgewick |
| Jon L. Bentley |
| |
| For more information on these sources, see the manual. |
| --*/ |
| |
| /*-- |
| CHANGES |
| ~~~~~~~ |
| 0.9.0 -- original version. |
| |
| 0.9.0a/b -- no changes in this file. |
| |
| 0.9.0c |
| * changed setting of nGroups in sendMTFValues() so as to |
| do a bit better on small files |
| --*/ |
| |
| |
| |
| /*---------------------------------------------------*/ |
| /*--- Bit stream I/O ---*/ |
| /*---------------------------------------------------*/ |
| |
| /*---------------------------------------------------*/ |
| void BZ2_bsInitWrite ( EState* s ) |
| { |
| s->bsLive = 0; |
| s->bsBuff = 0; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| static |
| void bsFinishWrite ( EState* s ) |
| { |
| while (s->bsLive > 0) { |
| s->zbits[s->numZ] = (UChar)(s->bsBuff >> 24); |
| s->numZ++; |
| s->bsBuff <<= 8; |
| s->bsLive -= 8; |
| } |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| #define bsNEEDW(nz) \ |
| { \ |
| while (s->bsLive >= 8) { \ |
| s->zbits[s->numZ] \ |
| = (UChar)(s->bsBuff >> 24); \ |
| s->numZ++; \ |
| s->bsBuff <<= 8; \ |
| s->bsLive -= 8; \ |
| } \ |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| static |
| __inline__ |
| void bsW ( EState* s, Int32 n, UInt32 v ) |
| { |
| bsNEEDW ( n ); |
| s->bsBuff |= (v << (32 - s->bsLive - n)); |
| s->bsLive += n; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| static |
| void bsPutUInt32 ( EState* s, UInt32 u ) |
| { |
| bsW ( s, 8, (u >> 24) & 0xffL ); |
| bsW ( s, 8, (u >> 16) & 0xffL ); |
| bsW ( s, 8, (u >> 8) & 0xffL ); |
| bsW ( s, 8, u & 0xffL ); |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| static |
| void bsPutUChar ( EState* s, UChar c ) |
| { |
| bsW( s, 8, (UInt32)c ); |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| /*--- The back end proper ---*/ |
| /*---------------------------------------------------*/ |
| |
| /*---------------------------------------------------*/ |
| static |
| void makeMaps_e ( EState* s ) |
| { |
| Int32 i; |
| s->nInUse = 0; |
| for (i = 0; i < 256; i++) |
| if (s->inUse[i]) { |
| s->unseqToSeq[i] = s->nInUse; |
| s->nInUse++; |
| } |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| static |
| void generateMTFValues ( EState* s ) |
| { |
| UChar yy[256]; |
| Int32 i, j; |
| Int32 zPend; |
| Int32 wr; |
| Int32 EOB; |
| |
| /* |
| After sorting (eg, here), |
| s->arr1 [ 0 .. s->nblock-1 ] holds sorted order, |
| and |
| ((UChar*)s->arr2) [ 0 .. s->nblock-1 ] |
| holds the original block data. |
| |
| The first thing to do is generate the MTF values, |
| and put them in |
| ((UInt16*)s->arr1) [ 0 .. s->nblock-1 ]. |
| Because there are strictly fewer or equal MTF values |
| than block values, ptr values in this area are overwritten |
| with MTF values only when they are no longer needed. |
| |
| The final compressed bitstream is generated into the |
| area starting at |
| (UChar*) (&((UChar*)s->arr2)[s->nblock]) |
| |
| These storage aliases are set up in bzCompressInit(), |
| except for the last one, which is arranged in |
| compressBlock(). |
| */ |
| UInt32* ptr = s->ptr; |
| UChar* block = s->block; |
| UInt16* mtfv = s->mtfv; |
| |
| makeMaps_e ( s ); |
| EOB = s->nInUse+1; |
| |
| for (i = 0; i <= EOB; i++) s->mtfFreq[i] = 0; |
| |
| wr = 0; |
| zPend = 0; |
| for (i = 0; i < s->nInUse; i++) yy[i] = (UChar) i; |
| |
| for (i = 0; i < s->nblock; i++) { |
| UChar ll_i; |
| AssertD ( wr <= i, "generateMTFValues(1)" ); |
| j = ptr[i]-1; if (j < 0) j += s->nblock; |
| ll_i = s->unseqToSeq[block[j]]; |
| AssertD ( ll_i < s->nInUse, "generateMTFValues(2a)" ); |
| |
| if (yy[0] == ll_i) { |
| zPend++; |
| } else { |
| |
| if (zPend > 0) { |
| zPend--; |
| while (True) { |
| if (zPend & 1) { |
| mtfv[wr] = BZ_RUNB; wr++; |
| s->mtfFreq[BZ_RUNB]++; |
| } else { |
| mtfv[wr] = BZ_RUNA; wr++; |
| s->mtfFreq[BZ_RUNA]++; |
| } |
| if (zPend < 2) break; |
| zPend = (zPend - 2) / 2; |
| }; |
| zPend = 0; |
| } |
| { |
| register UChar rtmp; |
| register UChar* ryy_j; |
| register UChar rll_i; |
| rtmp = yy[1]; |
| yy[1] = yy[0]; |
| ryy_j = &(yy[1]); |
| rll_i = ll_i; |
| while ( rll_i != rtmp ) { |
| register UChar rtmp2; |
| ryy_j++; |
| rtmp2 = rtmp; |
| rtmp = *ryy_j; |
| *ryy_j = rtmp2; |
| }; |
| yy[0] = rtmp; |
| j = ryy_j - &(yy[0]); |
| mtfv[wr] = j+1; wr++; s->mtfFreq[j+1]++; |
| } |
| |
| } |
| } |
| |
| if (zPend > 0) { |
| zPend--; |
| while (True) { |
| if (zPend & 1) { |
| mtfv[wr] = BZ_RUNB; wr++; |
| s->mtfFreq[BZ_RUNB]++; |
| } else { |
| mtfv[wr] = BZ_RUNA; wr++; |
| s->mtfFreq[BZ_RUNA]++; |
| } |
| if (zPend < 2) break; |
| zPend = (zPend - 2) / 2; |
| }; |
| zPend = 0; |
| } |
| |
| mtfv[wr] = EOB; wr++; s->mtfFreq[EOB]++; |
| |
| s->nMTF = wr; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| #define BZ_LESSER_ICOST 0 |
| #define BZ_GREATER_ICOST 15 |
| |
| static |
| void sendMTFValues ( EState* s ) |
| { |
| Int32 v, t, i, j, gs, ge, totc, bt, bc, iter; |
| Int32 nSelectors, alphaSize, minLen, maxLen, selCtr; |
| Int32 nGroups, nBytes; |
| |
| /*-- |
| UChar len [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE]; |
| is a global since the decoder also needs it. |
| |
| Int32 code[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE]; |
| Int32 rfreq[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE]; |
| are also globals only used in this proc. |
| Made global to keep stack frame size small. |
| --*/ |
| |
| |
| UInt16 cost[BZ_N_GROUPS]; |
| Int32 fave[BZ_N_GROUPS]; |
| |
| UInt16* mtfv = s->mtfv; |
| |
| if (s->verbosity >= 3) |
| VPrintf3( " %d in block, %d after MTF & 1-2 coding, " |
| "%d+2 syms in use\n", |
| s->nblock, s->nMTF, s->nInUse ); |
| |
| alphaSize = s->nInUse+2; |
| for (t = 0; t < BZ_N_GROUPS; t++) |
| for (v = 0; v < alphaSize; v++) |
| s->len[t][v] = BZ_GREATER_ICOST; |
| |
| /*--- Decide how many coding tables to use ---*/ |
| AssertH ( s->nMTF > 0, 3001 ); |
| if (s->nMTF < 200) nGroups = 2; else |
| if (s->nMTF < 600) nGroups = 3; else |
| if (s->nMTF < 1200) nGroups = 4; else |
| if (s->nMTF < 2400) nGroups = 5; else |
| nGroups = 6; |
| |
| /*--- Generate an initial set of coding tables ---*/ |
| { |
| Int32 nPart, remF, tFreq, aFreq; |
| |
| nPart = nGroups; |
| remF = s->nMTF; |
| gs = 0; |
| while (nPart > 0) { |
| tFreq = remF / nPart; |
| ge = gs-1; |
| aFreq = 0; |
| while (aFreq < tFreq && ge < alphaSize-1) { |
| ge++; |
| aFreq += s->mtfFreq[ge]; |
| } |
| |
| if (ge > gs |
| && nPart != nGroups && nPart != 1 |
| && ((nGroups-nPart) % 2 == 1)) { |
| aFreq -= s->mtfFreq[ge]; |
| ge--; |
| } |
| |
| if (0 && s->verbosity >= 3) |
| VPrintf5( " initial group %d, [%d .. %d], " |
| "has %d syms (%4.1f%%)\n", |
| nPart, gs, ge, aFreq, |
| (100.0 * (float)aFreq) / (float)(s->nMTF) ); |
| |
| for (v = 0; v < alphaSize; v++) |
| if (v >= gs && v <= ge) |
| s->len[nPart-1][v] = BZ_LESSER_ICOST; else |
| s->len[nPart-1][v] = BZ_GREATER_ICOST; |
| |
| nPart--; |
| gs = ge+1; |
| remF -= aFreq; |
| } |
| } |
| |
| /*--- |
| Iterate up to BZ_N_ITERS times to improve the tables. |
| ---*/ |
| for (iter = 0; iter < BZ_N_ITERS; iter++) { |
| |
| for (t = 0; t < nGroups; t++) fave[t] = 0; |
| |
| for (t = 0; t < nGroups; t++) |
| for (v = 0; v < alphaSize; v++) |
| s->rfreq[t][v] = 0; |
| |
| /*--- |
| Set up an auxiliary length table which is used to fast-track |
| the common case (nGroups == 6). |
| ---*/ |
| if (nGroups == 6) { |
| for (v = 0; v < alphaSize; v++) { |
| s->len_pack[v][0] = (s->len[1][v] << 16) | s->len[0][v]; |
| s->len_pack[v][1] = (s->len[3][v] << 16) | s->len[2][v]; |
| s->len_pack[v][2] = (s->len[5][v] << 16) | s->len[4][v]; |
| } |
| } |
| |
| nSelectors = 0; |
| totc = 0; |
| gs = 0; |
| while (True) { |
| |
| /*--- Set group start & end marks. --*/ |
| if (gs >= s->nMTF) break; |
| ge = gs + BZ_G_SIZE - 1; |
| if (ge >= s->nMTF) ge = s->nMTF-1; |
| |
| /*-- |
| Calculate the cost of this group as coded |
| by each of the coding tables. |
| --*/ |
| for (t = 0; t < nGroups; t++) cost[t] = 0; |
| |
| if (nGroups == 6 && 50 == ge-gs+1) { |
| /*--- fast track the common case ---*/ |
| register UInt32 cost01, cost23, cost45; |
| register UInt16 icv; |
| cost01 = cost23 = cost45 = 0; |
| |
| # define BZ_ITER(nn) \ |
| icv = mtfv[gs+(nn)]; \ |
| cost01 += s->len_pack[icv][0]; \ |
| cost23 += s->len_pack[icv][1]; \ |
| cost45 += s->len_pack[icv][2]; \ |
| |
| BZ_ITER(0); BZ_ITER(1); BZ_ITER(2); BZ_ITER(3); BZ_ITER(4); |
| BZ_ITER(5); BZ_ITER(6); BZ_ITER(7); BZ_ITER(8); BZ_ITER(9); |
| BZ_ITER(10); BZ_ITER(11); BZ_ITER(12); BZ_ITER(13); BZ_ITER(14); |
| BZ_ITER(15); BZ_ITER(16); BZ_ITER(17); BZ_ITER(18); BZ_ITER(19); |
| BZ_ITER(20); BZ_ITER(21); BZ_ITER(22); BZ_ITER(23); BZ_ITER(24); |
| BZ_ITER(25); BZ_ITER(26); BZ_ITER(27); BZ_ITER(28); BZ_ITER(29); |
| BZ_ITER(30); BZ_ITER(31); BZ_ITER(32); BZ_ITER(33); BZ_ITER(34); |
| BZ_ITER(35); BZ_ITER(36); BZ_ITER(37); BZ_ITER(38); BZ_ITER(39); |
| BZ_ITER(40); BZ_ITER(41); BZ_ITER(42); BZ_ITER(43); BZ_ITER(44); |
| BZ_ITER(45); BZ_ITER(46); BZ_ITER(47); BZ_ITER(48); BZ_ITER(49); |
| |
| # undef BZ_ITER |
| |
| cost[0] = cost01 & 0xffff; cost[1] = cost01 >> 16; |
| cost[2] = cost23 & 0xffff; cost[3] = cost23 >> 16; |
| cost[4] = cost45 & 0xffff; cost[5] = cost45 >> 16; |
| |
| } else { |
| /*--- slow version which correctly handles all situations ---*/ |
| for (i = gs; i <= ge; i++) { |
| UInt16 icv = mtfv[i]; |
| for (t = 0; t < nGroups; t++) cost[t] += s->len[t][icv]; |
| } |
| } |
| |
| /*-- |
| Find the coding table which is best for this group, |
| and record its identity in the selector table. |
| --*/ |
| bc = 999999999; bt = -1; |
| for (t = 0; t < nGroups; t++) |
| if (cost[t] < bc) { bc = cost[t]; bt = t; }; |
| totc += bc; |
| fave[bt]++; |
| s->selector[nSelectors] = bt; |
| nSelectors++; |
| |
| /*-- |
| Increment the symbol frequencies for the selected table. |
| --*/ |
| if (nGroups == 6 && 50 == ge-gs+1) { |
| /*--- fast track the common case ---*/ |
| |
| # define BZ_ITUR(nn) s->rfreq[bt][ mtfv[gs+(nn)] ]++ |
| |
| BZ_ITUR(0); BZ_ITUR(1); BZ_ITUR(2); BZ_ITUR(3); BZ_ITUR(4); |
| BZ_ITUR(5); BZ_ITUR(6); BZ_ITUR(7); BZ_ITUR(8); BZ_ITUR(9); |
| BZ_ITUR(10); BZ_ITUR(11); BZ_ITUR(12); BZ_ITUR(13); BZ_ITUR(14); |
| BZ_ITUR(15); BZ_ITUR(16); BZ_ITUR(17); BZ_ITUR(18); BZ_ITUR(19); |
| BZ_ITUR(20); BZ_ITUR(21); BZ_ITUR(22); BZ_ITUR(23); BZ_ITUR(24); |
| BZ_ITUR(25); BZ_ITUR(26); BZ_ITUR(27); BZ_ITUR(28); BZ_ITUR(29); |
| BZ_ITUR(30); BZ_ITUR(31); BZ_ITUR(32); BZ_ITUR(33); BZ_ITUR(34); |
| BZ_ITUR(35); BZ_ITUR(36); BZ_ITUR(37); BZ_ITUR(38); BZ_ITUR(39); |
| BZ_ITUR(40); BZ_ITUR(41); BZ_ITUR(42); BZ_ITUR(43); BZ_ITUR(44); |
| BZ_ITUR(45); BZ_ITUR(46); BZ_ITUR(47); BZ_ITUR(48); BZ_ITUR(49); |
| |
| # undef BZ_ITUR |
| |
| } else { |
| /*--- slow version which correctly handles all situations ---*/ |
| for (i = gs; i <= ge; i++) |
| s->rfreq[bt][ mtfv[i] ]++; |
| } |
| |
| gs = ge+1; |
| } |
| if (s->verbosity >= 3) { |
| VPrintf2 ( " pass %d: size is %d, grp uses are ", |
| iter+1, totc/8 ); |
| for (t = 0; t < nGroups; t++) |
| VPrintf1 ( "%d ", fave[t] ); |
| VPrintf0 ( "\n" ); |
| } |
| |
| /*-- |
| Recompute the tables based on the accumulated frequencies. |
| --*/ |
| /* maxLen was changed from 20 to 17 in bzip2-1.0.3. See |
| comment in huffman.c for details. */ |
| for (t = 0; t < nGroups; t++) |
| BZ2_hbMakeCodeLengths ( &(s->len[t][0]), &(s->rfreq[t][0]), |
| alphaSize, 17 /*20*/ ); |
| } |
| |
| |
| AssertH( nGroups < 8, 3002 ); |
| AssertH( nSelectors < 32768 && |
| nSelectors <= (2 + (900000 / BZ_G_SIZE)), |
| 3003 ); |
| |
| |
| /*--- Compute MTF values for the selectors. ---*/ |
| { |
| UChar pos[BZ_N_GROUPS], ll_i, tmp2, tmp; |
| for (i = 0; i < nGroups; i++) pos[i] = i; |
| for (i = 0; i < nSelectors; i++) { |
| ll_i = s->selector[i]; |
| j = 0; |
| tmp = pos[j]; |
| while ( ll_i != tmp ) { |
| j++; |
| tmp2 = tmp; |
| tmp = pos[j]; |
| pos[j] = tmp2; |
| }; |
| pos[0] = tmp; |
| s->selectorMtf[i] = j; |
| } |
| }; |
| |
| /*--- Assign actual codes for the tables. --*/ |
| for (t = 0; t < nGroups; t++) { |
| minLen = 32; |
| maxLen = 0; |
| for (i = 0; i < alphaSize; i++) { |
| if (s->len[t][i] > maxLen) maxLen = s->len[t][i]; |
| if (s->len[t][i] < minLen) minLen = s->len[t][i]; |
| } |
| AssertH ( !(maxLen > 17 /*20*/ ), 3004 ); |
| AssertH ( !(minLen < 1), 3005 ); |
| BZ2_hbAssignCodes ( &(s->code[t][0]), &(s->len[t][0]), |
| minLen, maxLen, alphaSize ); |
| } |
| |
| /*--- Transmit the mapping table. ---*/ |
| { |
| Bool inUse16[16]; |
| for (i = 0; i < 16; i++) { |
| inUse16[i] = False; |
| for (j = 0; j < 16; j++) |
| if (s->inUse[i * 16 + j]) inUse16[i] = True; |
| } |
| |
| nBytes = s->numZ; |
| for (i = 0; i < 16; i++) |
| if (inUse16[i]) bsW(s,1,1); else bsW(s,1,0); |
| |
| for (i = 0; i < 16; i++) |
| if (inUse16[i]) |
| for (j = 0; j < 16; j++) { |
| if (s->inUse[i * 16 + j]) bsW(s,1,1); else bsW(s,1,0); |
| } |
| |
| if (s->verbosity >= 3) |
| VPrintf1( " bytes: mapping %d, ", s->numZ-nBytes ); |
| } |
| |
| /*--- Now the selectors. ---*/ |
| nBytes = s->numZ; |
| bsW ( s, 3, nGroups ); |
| bsW ( s, 15, nSelectors ); |
| for (i = 0; i < nSelectors; i++) { |
| for (j = 0; j < s->selectorMtf[i]; j++) bsW(s,1,1); |
| bsW(s,1,0); |
| } |
| if (s->verbosity >= 3) |
| VPrintf1( "selectors %d, ", s->numZ-nBytes ); |
| |
| /*--- Now the coding tables. ---*/ |
| nBytes = s->numZ; |
| |
| for (t = 0; t < nGroups; t++) { |
| Int32 curr = s->len[t][0]; |
| bsW ( s, 5, curr ); |
| for (i = 0; i < alphaSize; i++) { |
| while (curr < s->len[t][i]) { bsW(s,2,2); curr++; /* 10 */ }; |
| while (curr > s->len[t][i]) { bsW(s,2,3); curr--; /* 11 */ }; |
| bsW ( s, 1, 0 ); |
| } |
| } |
| |
| if (s->verbosity >= 3) |
| VPrintf1 ( "code lengths %d, ", s->numZ-nBytes ); |
| |
| /*--- And finally, the block data proper ---*/ |
| nBytes = s->numZ; |
| selCtr = 0; |
| gs = 0; |
| while (True) { |
| if (gs >= s->nMTF) break; |
| ge = gs + BZ_G_SIZE - 1; |
| if (ge >= s->nMTF) ge = s->nMTF-1; |
| AssertH ( s->selector[selCtr] < nGroups, 3006 ); |
| |
| if (nGroups == 6 && 50 == ge-gs+1) { |
| /*--- fast track the common case ---*/ |
| UInt16 mtfv_i; |
| UChar* s_len_sel_selCtr |
| = &(s->len[s->selector[selCtr]][0]); |
| Int32* s_code_sel_selCtr |
| = &(s->code[s->selector[selCtr]][0]); |
| |
| # define BZ_ITAH(nn) \ |
| mtfv_i = mtfv[gs+(nn)]; \ |
| bsW ( s, \ |
| s_len_sel_selCtr[mtfv_i], \ |
| s_code_sel_selCtr[mtfv_i] ) |
| |
| BZ_ITAH(0); BZ_ITAH(1); BZ_ITAH(2); BZ_ITAH(3); BZ_ITAH(4); |
| BZ_ITAH(5); BZ_ITAH(6); BZ_ITAH(7); BZ_ITAH(8); BZ_ITAH(9); |
| BZ_ITAH(10); BZ_ITAH(11); BZ_ITAH(12); BZ_ITAH(13); BZ_ITAH(14); |
| BZ_ITAH(15); BZ_ITAH(16); BZ_ITAH(17); BZ_ITAH(18); BZ_ITAH(19); |
| BZ_ITAH(20); BZ_ITAH(21); BZ_ITAH(22); BZ_ITAH(23); BZ_ITAH(24); |
| BZ_ITAH(25); BZ_ITAH(26); BZ_ITAH(27); BZ_ITAH(28); BZ_ITAH(29); |
| BZ_ITAH(30); BZ_ITAH(31); BZ_ITAH(32); BZ_ITAH(33); BZ_ITAH(34); |
| BZ_ITAH(35); BZ_ITAH(36); BZ_ITAH(37); BZ_ITAH(38); BZ_ITAH(39); |
| BZ_ITAH(40); BZ_ITAH(41); BZ_ITAH(42); BZ_ITAH(43); BZ_ITAH(44); |
| BZ_ITAH(45); BZ_ITAH(46); BZ_ITAH(47); BZ_ITAH(48); BZ_ITAH(49); |
| |
| # undef BZ_ITAH |
| |
| } else { |
| /*--- slow version which correctly handles all situations ---*/ |
| for (i = gs; i <= ge; i++) { |
| bsW ( s, |
| s->len [s->selector[selCtr]] [mtfv[i]], |
| s->code [s->selector[selCtr]] [mtfv[i]] ); |
| } |
| } |
| |
| |
| gs = ge+1; |
| selCtr++; |
| } |
| AssertH( selCtr == nSelectors, 3007 ); |
| |
| if (s->verbosity >= 3) |
| VPrintf1( "codes %d\n", s->numZ-nBytes ); |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| void BZ2_compressBlock ( EState* s, Bool is_last_block ) |
| { |
| if (s->nblock > 0) { |
| |
| BZ_FINALISE_CRC ( s->blockCRC ); |
| s->combinedCRC = (s->combinedCRC << 1) | (s->combinedCRC >> 31); |
| s->combinedCRC ^= s->blockCRC; |
| if (s->blockNo > 1) s->numZ = 0; |
| |
| if (s->verbosity >= 2) |
| VPrintf4( " block %d: crc = 0x%08x, " |
| "combined CRC = 0x%08x, size = %d\n", |
| s->blockNo, s->blockCRC, s->combinedCRC, s->nblock ); |
| |
| BZ2_blockSort ( s ); |
| } |
| |
| s->zbits = (UChar*) (&((UChar*)s->arr2)[s->nblock]); |
| |
| /*-- If this is the first block, create the stream header. --*/ |
| if (s->blockNo == 1) { |
| BZ2_bsInitWrite ( s ); |
| bsPutUChar ( s, BZ_HDR_B ); |
| bsPutUChar ( s, BZ_HDR_Z ); |
| bsPutUChar ( s, BZ_HDR_h ); |
| bsPutUChar ( s, (UChar)(BZ_HDR_0 + s->blockSize100k) ); |
| } |
| |
| if (s->nblock > 0) { |
| |
| bsPutUChar ( s, 0x31 ); bsPutUChar ( s, 0x41 ); |
| bsPutUChar ( s, 0x59 ); bsPutUChar ( s, 0x26 ); |
| bsPutUChar ( s, 0x53 ); bsPutUChar ( s, 0x59 ); |
| |
| /*-- Now the block's CRC, so it is in a known place. --*/ |
| bsPutUInt32 ( s, s->blockCRC ); |
| |
| /*-- |
| Now a single bit indicating (non-)randomisation. |
| As of version 0.9.5, we use a better sorting algorithm |
| which makes randomisation unnecessary. So always set |
| the randomised bit to 'no'. Of course, the decoder |
| still needs to be able to handle randomised blocks |
| so as to maintain backwards compatibility with |
| older versions of bzip2. |
| --*/ |
| bsW(s,1,0); |
| |
| bsW ( s, 24, s->origPtr ); |
| generateMTFValues ( s ); |
| sendMTFValues ( s ); |
| } |
| |
| |
| /*-- If this is the last block, add the stream trailer. --*/ |
| if (is_last_block) { |
| |
| bsPutUChar ( s, 0x17 ); bsPutUChar ( s, 0x72 ); |
| bsPutUChar ( s, 0x45 ); bsPutUChar ( s, 0x38 ); |
| bsPutUChar ( s, 0x50 ); bsPutUChar ( s, 0x90 ); |
| bsPutUInt32 ( s, s->combinedCRC ); |
| if (s->verbosity >= 2) |
| VPrintf1( " final combined CRC = 0x%08x\n ", s->combinedCRC ); |
| bsFinishWrite ( s ); |
| } |
| } |
| |
| |
| /*-------------------------------------------------------------*/ |
| /*--- end compress.c ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| |
| /*-------------------------------------------------------------*/ |
| /*--- Table for randomising repetitive blocks ---*/ |
| /*--- randtable.c ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| /*-- |
| This file is a part of bzip2 and/or libbzip2, a program and |
| library for lossless, block-sorting data compression. |
| |
| Copyright (C) 1996-2004 Julian R Seward. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| 1. Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| |
| 2. The origin of this software must not be misrepresented; you must |
| not claim that you wrote the original software. If you use this |
| software in a product, an acknowledgment in the product |
| documentation would be appreciated but is not required. |
| |
| 3. Altered source versions must be plainly marked as such, and must |
| not be misrepresented as being the original software. |
| |
| 4. The name of the author may not be used to endorse or promote |
| products derived from this software without specific prior written |
| permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS |
| OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| Julian Seward, Cambridge, UK. |
| jseward@bzip.org |
| bzip2/libbzip2 version 1.0 of 21 March 2000 |
| |
| This program is based on (at least) the work of: |
| Mike Burrows |
| David Wheeler |
| Peter Fenwick |
| Alistair Moffat |
| Radford Neal |
| Ian H. Witten |
| Robert Sedgewick |
| Jon L. Bentley |
| |
| For more information on these sources, see the manual. |
| --*/ |
| |
| |
| |
| |
| /*---------------------------------------------*/ |
| Int32 BZ2_rNums[512] = { |
| 619, 720, 127, 481, 931, 816, 813, 233, 566, 247, |
| 985, 724, 205, 454, 863, 491, 741, 242, 949, 214, |
| 733, 859, 335, 708, 621, 574, 73, 654, 730, 472, |
| 419, 436, 278, 496, 867, 210, 399, 680, 480, 51, |
| 878, 465, 811, 169, 869, 675, 611, 697, 867, 561, |
| 862, 687, 507, 283, 482, 129, 807, 591, 733, 623, |
| 150, 238, 59, 379, 684, 877, 625, 169, 643, 105, |
| 170, 607, 520, 932, 727, 476, 693, 425, 174, 647, |
| 73, 122, 335, 530, 442, 853, 695, 249, 445, 515, |
| 909, 545, 703, 919, 874, 474, 882, 500, 594, 612, |
| 641, 801, 220, 162, 819, 984, 589, 513, 495, 799, |
| 161, 604, 958, 533, 221, 400, 386, 867, 600, 782, |
| 382, 596, 414, 171, 516, 375, 682, 485, 911, 276, |
| 98, 553, 163, 354, 666, 933, 424, 341, 533, 870, |
| 227, 730, 475, 186, 263, 647, 537, 686, 600, 224, |
| 469, 68, 770, 919, 190, 373, 294, 822, 808, 206, |
| 184, 943, 795, 384, 383, 461, 404, 758, 839, 887, |
| 715, 67, 618, 276, 204, 918, 873, 777, 604, 560, |
| 951, 160, 578, 722, 79, 804, 96, 409, 713, 940, |
| 652, 934, 970, 447, 318, 353, 859, 672, 112, 785, |
| 645, 863, 803, 350, 139, 93, 354, 99, 820, 908, |
| 609, 772, 154, 274, 580, 184, 79, 626, 630, 742, |
| 653, 282, 762, 623, 680, 81, 927, 626, 789, 125, |
| 411, 521, 938, 300, 821, 78, 343, 175, 128, 250, |
| 170, 774, 972, 275, 999, 639, 495, 78, 352, 126, |
| 857, 956, 358, 619, 580, 124, 737, 594, 701, 612, |
| 669, 112, 134, 694, 363, 992, 809, 743, 168, 974, |
| 944, 375, 748, 52, 600, 747, 642, 182, 862, 81, |
| 344, 805, 988, 739, 511, 655, 814, 334, 249, 515, |
| 897, 955, 664, 981, 649, 113, 974, 459, 893, 228, |
| 433, 837, 553, 268, 926, 240, 102, 654, 459, 51, |
| 686, 754, 806, 760, 493, 403, 415, 394, 687, 700, |
| 946, 670, 656, 610, 738, 392, 760, 799, 887, 653, |
| 978, 321, 576, 617, 626, 502, 894, 679, 243, 440, |
| 680, 879, 194, 572, 640, 724, 926, 56, 204, 700, |
| 707, 151, 457, 449, 797, 195, 791, 558, 945, 679, |
| 297, 59, 87, 824, 713, 663, 412, 693, 342, 606, |
| 134, 108, 571, 364, 631, 212, 174, 643, 304, 329, |
| 343, 97, 430, 751, 497, 314, 983, 374, 822, 928, |
| 140, 206, 73, 263, 980, 736, 876, 478, 430, 305, |
| 170, 514, 364, 692, 829, 82, 855, 953, 676, 246, |
| 369, 970, 294, 750, 807, 827, 150, 790, 288, 923, |
| 804, 378, 215, 828, 592, 281, 565, 555, 710, 82, |
| 896, 831, 547, 261, 524, 462, 293, 465, 502, 56, |
| 661, 821, 976, 991, 658, 869, 905, 758, 745, 193, |
| 768, 550, 608, 933, 378, 286, 215, 979, 792, 961, |
| 61, 688, 793, 644, 986, 403, 106, 366, 905, 644, |
| 372, 567, 466, 434, 645, 210, 389, 550, 919, 135, |
| 780, 773, 635, 389, 707, 100, 626, 958, 165, 504, |
| 920, 176, 193, 713, 857, 265, 203, 50, 668, 108, |
| 645, 990, 626, 197, 510, 357, 358, 850, 858, 364, |
| 936, 638 |
| }; |
| |
| |
| /*-------------------------------------------------------------*/ |
| /*--- end randtable.c ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| /*-------------------------------------------------------------*/ |
| /*--- Table for doing CRCs ---*/ |
| /*--- crctable.c ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| /*-- |
| This file is a part of bzip2 and/or libbzip2, a program and |
| library for lossless, block-sorting data compression. |
| |
| Copyright (C) 1996-2004 Julian R Seward. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| 1. Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| |
| 2. The origin of this software must not be misrepresented; you must |
| not claim that you wrote the original software. If you use this |
| software in a product, an acknowledgment in the product |
| documentation would be appreciated but is not required. |
| |
| 3. Altered source versions must be plainly marked as such, and must |
| not be misrepresented as being the original software. |
| |
| 4. The name of the author may not be used to endorse or promote |
| products derived from this software without specific prior written |
| permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS |
| OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| Julian Seward, Cambridge, UK. |
| jseward@bzip.org |
| bzip2/libbzip2 version 1.0 of 21 March 2000 |
| |
| This program is based on (at least) the work of: |
| Mike Burrows |
| David Wheeler |
| Peter Fenwick |
| Alistair Moffat |
| Radford Neal |
| Ian H. Witten |
| Robert Sedgewick |
| Jon L. Bentley |
| |
| For more information on these sources, see the manual. |
| --*/ |
| |
| |
| |
| |
| |
| /*-- |
| I think this is an implementation of the AUTODIN-II, |
| Ethernet & FDDI 32-bit CRC standard. Vaguely derived |
| from code by Rob Warnock, in Section 51 of the |
| comp.compression FAQ. |
| --*/ |
| |
| UInt32 BZ2_crc32Table[256] = { |
| |
| /*-- Ugly, innit? --*/ |
| |
| 0x00000000L, 0x04c11db7L, 0x09823b6eL, 0x0d4326d9L, |
| 0x130476dcL, 0x17c56b6bL, 0x1a864db2L, 0x1e475005L, |
| 0x2608edb8L, 0x22c9f00fL, 0x2f8ad6d6L, 0x2b4bcb61L, |
| 0x350c9b64L, 0x31cd86d3L, 0x3c8ea00aL, 0x384fbdbdL, |
| 0x4c11db70L, 0x48d0c6c7L, 0x4593e01eL, 0x4152fda9L, |
| 0x5f15adacL, 0x5bd4b01bL, 0x569796c2L, 0x52568b75L, |
| 0x6a1936c8L, 0x6ed82b7fL, 0x639b0da6L, 0x675a1011L, |
| 0x791d4014L, 0x7ddc5da3L, 0x709f7b7aL, 0x745e66cdL, |
| 0x9823b6e0L, 0x9ce2ab57L, 0x91a18d8eL, 0x95609039L, |
| 0x8b27c03cL, 0x8fe6dd8bL, 0x82a5fb52L, 0x8664e6e5L, |
| 0xbe2b5b58L, 0xbaea46efL, 0xb7a96036L, 0xb3687d81L, |
| 0xad2f2d84L, 0xa9ee3033L, 0xa4ad16eaL, 0xa06c0b5dL, |
| 0xd4326d90L, 0xd0f37027L, 0xddb056feL, 0xd9714b49L, |
| 0xc7361b4cL, 0xc3f706fbL, 0xceb42022L, 0xca753d95L, |
| 0xf23a8028L, 0xf6fb9d9fL, 0xfbb8bb46L, 0xff79a6f1L, |
| 0xe13ef6f4L, 0xe5ffeb43L, 0xe8bccd9aL, 0xec7dd02dL, |
| 0x34867077L, 0x30476dc0L, 0x3d044b19L, 0x39c556aeL, |
| 0x278206abL, 0x23431b1cL, 0x2e003dc5L, 0x2ac12072L, |
| 0x128e9dcfL, 0x164f8078L, 0x1b0ca6a1L, 0x1fcdbb16L, |
| 0x018aeb13L, 0x054bf6a4L, 0x0808d07dL, 0x0cc9cdcaL, |
| 0x7897ab07L, 0x7c56b6b0L, 0x71159069L, 0x75d48ddeL, |
| 0x6b93dddbL, 0x6f52c06cL, 0x6211e6b5L, 0x66d0fb02L, |
| 0x5e9f46bfL, 0x5a5e5b08L, 0x571d7dd1L, 0x53dc6066L, |
| 0x4d9b3063L, 0x495a2dd4L, 0x44190b0dL, 0x40d816baL, |
| 0xaca5c697L, 0xa864db20L, 0xa527fdf9L, 0xa1e6e04eL, |
| 0xbfa1b04bL, 0xbb60adfcL, 0xb6238b25L, 0xb2e29692L, |
| 0x8aad2b2fL, 0x8e6c3698L, 0x832f1041L, 0x87ee0df6L, |
| 0x99a95df3L, 0x9d684044L, 0x902b669dL, 0x94ea7b2aL, |
| 0xe0b41de7L, 0xe4750050L, 0xe9362689L, 0xedf73b3eL, |
| 0xf3b06b3bL, 0xf771768cL, 0xfa325055L, 0xfef34de2L, |
| 0xc6bcf05fL, 0xc27dede8L, 0xcf3ecb31L, 0xcbffd686L, |
| 0xd5b88683L, 0xd1799b34L, 0xdc3abdedL, 0xd8fba05aL, |
| 0x690ce0eeL, 0x6dcdfd59L, 0x608edb80L, 0x644fc637L, |
| 0x7a089632L, 0x7ec98b85L, 0x738aad5cL, 0x774bb0ebL, |
| 0x4f040d56L, 0x4bc510e1L, 0x46863638L, 0x42472b8fL, |
| 0x5c007b8aL, 0x58c1663dL, 0x558240e4L, 0x51435d53L, |
| 0x251d3b9eL, 0x21dc2629L, 0x2c9f00f0L, 0x285e1d47L, |
| 0x36194d42L, 0x32d850f5L, 0x3f9b762cL, 0x3b5a6b9bL, |
| 0x0315d626L, 0x07d4cb91L, 0x0a97ed48L, 0x0e56f0ffL, |
| 0x1011a0faL, 0x14d0bd4dL, 0x19939b94L, 0x1d528623L, |
| 0xf12f560eL, 0xf5ee4bb9L, 0xf8ad6d60L, 0xfc6c70d7L, |
| 0xe22b20d2L, 0xe6ea3d65L, 0xeba91bbcL, 0xef68060bL, |
| 0xd727bbb6L, 0xd3e6a601L, 0xdea580d8L, 0xda649d6fL, |
| 0xc423cd6aL, 0xc0e2d0ddL, 0xcda1f604L, 0xc960ebb3L, |
| 0xbd3e8d7eL, 0xb9ff90c9L, 0xb4bcb610L, 0xb07daba7L, |
| 0xae3afba2L, 0xaafbe615L, 0xa7b8c0ccL, 0xa379dd7bL, |
| 0x9b3660c6L, 0x9ff77d71L, 0x92b45ba8L, 0x9675461fL, |
| 0x8832161aL, 0x8cf30badL, 0x81b02d74L, 0x857130c3L, |
| 0x5d8a9099L, 0x594b8d2eL, 0x5408abf7L, 0x50c9b640L, |
| 0x4e8ee645L, 0x4a4ffbf2L, 0x470cdd2bL, 0x43cdc09cL, |
| 0x7b827d21L, 0x7f436096L, 0x7200464fL, 0x76c15bf8L, |
| 0x68860bfdL, 0x6c47164aL, 0x61043093L, 0x65c52d24L, |
| 0x119b4be9L, 0x155a565eL, 0x18197087L, 0x1cd86d30L, |
| 0x029f3d35L, 0x065e2082L, 0x0b1d065bL, 0x0fdc1becL, |
| 0x3793a651L, 0x3352bbe6L, 0x3e119d3fL, 0x3ad08088L, |
| 0x2497d08dL, 0x2056cd3aL, 0x2d15ebe3L, 0x29d4f654L, |
| 0xc5a92679L, 0xc1683bceL, 0xcc2b1d17L, 0xc8ea00a0L, |
| 0xd6ad50a5L, 0xd26c4d12L, 0xdf2f6bcbL, 0xdbee767cL, |
| 0xe3a1cbc1L, 0xe760d676L, 0xea23f0afL, 0xeee2ed18L, |
| 0xf0a5bd1dL, 0xf464a0aaL, 0xf9278673L, 0xfde69bc4L, |
| 0x89b8fd09L, 0x8d79e0beL, 0x803ac667L, 0x84fbdbd0L, |
| 0x9abc8bd5L, 0x9e7d9662L, 0x933eb0bbL, 0x97ffad0cL, |
| 0xafb010b1L, 0xab710d06L, 0xa6322bdfL, 0xa2f33668L, |
| 0xbcb4666dL, 0xb8757bdaL, 0xb5365d03L, 0xb1f740b4L |
| }; |
| |
| |
| /*-------------------------------------------------------------*/ |
| /*--- end crctable.c ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| /*-------------------------------------------------------------*/ |
| /*--- Library top-level functions. ---*/ |
| /*--- bzlib.c ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| /*-- |
| This file is a part of bzip2 and/or libbzip2, a program and |
| library for lossless, block-sorting data compression. |
| |
| Copyright (C) 1996-2004 Julian R Seward. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions |
| are met: |
| |
| 1. Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| |
| 2. The origin of this software must not be misrepresented; you must |
| not claim that you wrote the original software. If you use this |
| software in a product, an acknowledgment in the product |
| documentation would be appreciated but is not required. |
| |
| 3. Altered source versions must be plainly marked as such, and must |
| not be misrepresented as being the original software. |
| |
| 4. The name of the author may not be used to endorse or promote |
| products derived from this software without specific prior written |
| permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS |
| OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| Julian Seward, Cambridge, UK. |
| jseward@bzip.org |
| bzip2/libbzip2 version 1.0 of 21 March 2000 |
| |
| This program is based on (at least) the work of: |
| Mike Burrows |
| David Wheeler |
| Peter Fenwick |
| Alistair Moffat |
| Radford Neal |
| Ian H. Witten |
| Robert Sedgewick |
| Jon L. Bentley |
| |
| For more information on these sources, see the manual. |
| --*/ |
| |
| /*-- |
| CHANGES |
| ~~~~~~~ |
| 0.9.0 -- original version. |
| |
| 0.9.0a/b -- no changes in this file. |
| |
| 0.9.0c |
| * made zero-length BZ_FLUSH work correctly in bzCompress(). |
| * fixed bzWrite/bzRead to ignore zero-length requests. |
| * fixed bzread to correctly handle read requests after EOF. |
| * wrong parameter order in call to bzDecompressInit in |
| bzBuffToBuffDecompress. Fixed. |
| --*/ |
| |
| |
| |
| /*---------------------------------------------------*/ |
| /*--- Compression stuff ---*/ |
| /*---------------------------------------------------*/ |
| |
| |
| /*---------------------------------------------------*/ |
| void BZ2_bz__AssertH__fail ( int errcode ) |
| { |
| vex_printf("BZ2_bz__AssertH__fail(%d) called, exiting\n", errcode); |
| (*serviceFn)(0,0); |
| } |
| |
| void bz_internal_error ( int errcode ) |
| { |
| vex_printf("bz_internal_error called, exiting\n", errcode); |
| (*serviceFn)(0,0); |
| } |
| |
| /*---------------------------------------------------*/ |
| static |
| int bz_config_ok ( void ) |
| { |
| if (sizeof(int) != 4) return 0; |
| if (sizeof(short) != 2) return 0; |
| if (sizeof(char) != 1) return 0; |
| return 1; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| static |
| void* default_bzalloc ( void* opaque, Int32 items, Int32 size ) |
| { |
| void* v = (void*) (*serviceFn)(2, items * size ); |
| return v; |
| } |
| |
| static |
| void default_bzfree ( void* opaque, void* addr ) |
| { |
| if (addr != NULL) (*serviceFn)( 3, (HWord)addr ); |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| static |
| void prepare_new_block ( EState* s ) |
| { |
| Int32 i; |
| s->nblock = 0; |
| s->numZ = 0; |
| s->state_out_pos = 0; |
| BZ_INITIALISE_CRC ( s->blockCRC ); |
| for (i = 0; i < 256; i++) s->inUse[i] = False; |
| s->blockNo++; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| static |
| void init_RL ( EState* s ) |
| { |
| s->state_in_ch = 256; |
| s->state_in_len = 0; |
| } |
| |
| |
| static |
| Bool isempty_RL ( EState* s ) |
| { |
| if (s->state_in_ch < 256 && s->state_in_len > 0) |
| return False; else |
| return True; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| int BZ_API(BZ2_bzCompressInit) |
| ( bz_stream* strm, |
| int blockSize100k, |
| int verbosity, |
| int workFactor ) |
| { |
| Int32 n; |
| EState* s; |
| |
| if (!bz_config_ok()) return BZ_CONFIG_ERROR; |
| |
| if (strm == NULL || |
| blockSize100k < 1 || blockSize100k > 9 || |
| workFactor < 0 || workFactor > 250) |
| return BZ_PARAM_ERROR; |
| |
| if (workFactor == 0) workFactor = 30; |
| if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc; |
| if (strm->bzfree == NULL) strm->bzfree = default_bzfree; |
| |
| s = BZALLOC( sizeof(EState) ); |
| if (s == NULL) return BZ_MEM_ERROR; |
| s->strm = strm; |
| |
| s->arr1 = NULL; |
| s->arr2 = NULL; |
| s->ftab = NULL; |
| |
| n = 100000 * blockSize100k; |
| s->arr1 = BZALLOC( n * sizeof(UInt32) ); |
| s->arr2 = BZALLOC( (n+BZ_N_OVERSHOOT) * sizeof(UInt32) ); |
| s->ftab = BZALLOC( 65537 * sizeof(UInt32) ); |
| |
| if (s->arr1 == NULL || s->arr2 == NULL || s->ftab == NULL) { |
| if (s->arr1 != NULL) BZFREE(s->arr1); |
| if (s->arr2 != NULL) BZFREE(s->arr2); |
| if (s->ftab != NULL) BZFREE(s->ftab); |
| if (s != NULL) BZFREE(s); |
| return BZ_MEM_ERROR; |
| } |
| |
| s->blockNo = 0; |
| s->state = BZ_S_INPUT; |
| s->mode = BZ_M_RUNNING; |
| s->combinedCRC = 0; |
| s->blockSize100k = blockSize100k; |
| s->nblockMAX = 100000 * blockSize100k - 19; |
| s->verbosity = verbosity; |
| s->workFactor = workFactor; |
| |
| s->block = (UChar*)s->arr2; |
| s->mtfv = (UInt16*)s->arr1; |
| s->zbits = NULL; |
| s->ptr = (UInt32*)s->arr1; |
| |
| strm->state = s; |
| strm->total_in_lo32 = 0; |
| strm->total_in_hi32 = 0; |
| strm->total_out_lo32 = 0; |
| strm->total_out_hi32 = 0; |
| init_RL ( s ); |
| prepare_new_block ( s ); |
| return BZ_OK; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| static |
| void add_pair_to_block ( EState* s ) |
| { |
| Int32 i; |
| UChar ch = (UChar)(s->state_in_ch); |
| for (i = 0; i < s->state_in_len; i++) { |
| BZ_UPDATE_CRC( s->blockCRC, ch ); |
| } |
| s->inUse[s->state_in_ch] = True; |
| switch (s->state_in_len) { |
| case 1: |
| s->block[s->nblock] = (UChar)ch; s->nblock++; |
| break; |
| case 2: |
| s->block[s->nblock] = (UChar)ch; s->nblock++; |
| s->block[s->nblock] = (UChar)ch; s->nblock++; |
| break; |
| case 3: |
| s->block[s->nblock] = (UChar)ch; s->nblock++; |
| s->block[s->nblock] = (UChar)ch; s->nblock++; |
| s->block[s->nblock] = (UChar)ch; s->nblock++; |
| break; |
| default: |
| s->inUse[s->state_in_len-4] = True; |
| s->block[s->nblock] = (UChar)ch; s->nblock++; |
| s->block[s->nblock] = (UChar)ch; s->nblock++; |
| s->block[s->nblock] = (UChar)ch; s->nblock++; |
| s->block[s->nblock] = (UChar)ch; s->nblock++; |
| s->block[s->nblock] = ((UChar)(s->state_in_len-4)); |
| s->nblock++; |
| break; |
| } |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| static |
| void flush_RL ( EState* s ) |
| { |
| if (s->state_in_ch < 256) add_pair_to_block ( s ); |
| init_RL ( s ); |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| #define ADD_CHAR_TO_BLOCK(zs,zchh0) \ |
| { \ |
| UInt32 zchh = (UInt32)(zchh0); \ |
| /*-- fast track the common case --*/ \ |
| if (zchh != zs->state_in_ch && \ |
| zs->state_in_len == 1) { \ |
| UChar ch = (UChar)(zs->state_in_ch); \ |
| BZ_UPDATE_CRC( zs->blockCRC, ch ); \ |
| zs->inUse[zs->state_in_ch] = True; \ |
| zs->block[zs->nblock] = (UChar)ch; \ |
| zs->nblock++; \ |
| zs->state_in_ch = zchh; \ |
| } \ |
| else \ |
| /*-- general, uncommon cases --*/ \ |
| if (zchh != zs->state_in_ch || \ |
| zs->state_in_len == 255) { \ |
| if (zs->state_in_ch < 256) \ |
| add_pair_to_block ( zs ); \ |
| zs->state_in_ch = zchh; \ |
| zs->state_in_len = 1; \ |
| } else { \ |
| zs->state_in_len++; \ |
| } \ |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| static |
| Bool copy_input_until_stop ( EState* s ) |
| { |
| Bool progress_in = False; |
| |
| if (s->mode == BZ_M_RUNNING) { |
| |
| /*-- fast track the common case --*/ |
| while (True) { |
| /*-- block full? --*/ |
| if (s->nblock >= s->nblockMAX) break; |
| /*-- no input? --*/ |
| if (s->strm->avail_in == 0) break; |
| progress_in = True; |
| ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) ); |
| s->strm->next_in++; |
| s->strm->avail_in--; |
| s->strm->total_in_lo32++; |
| if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++; |
| } |
| |
| } else { |
| |
| /*-- general, uncommon case --*/ |
| while (True) { |
| /*-- block full? --*/ |
| if (s->nblock >= s->nblockMAX) break; |
| /*-- no input? --*/ |
| if (s->strm->avail_in == 0) break; |
| /*-- flush/finish end? --*/ |
| if (s->avail_in_expect == 0) break; |
| progress_in = True; |
| ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) ); |
| s->strm->next_in++; |
| s->strm->avail_in--; |
| s->strm->total_in_lo32++; |
| if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++; |
| s->avail_in_expect--; |
| } |
| } |
| return progress_in; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| static |
| Bool copy_output_until_stop ( EState* s ) |
| { |
| Bool progress_out = False; |
| |
| while (True) { |
| |
| /*-- no output space? --*/ |
| if (s->strm->avail_out == 0) break; |
| |
| /*-- block done? --*/ |
| if (s->state_out_pos >= s->numZ) break; |
| |
| progress_out = True; |
| *(s->strm->next_out) = s->zbits[s->state_out_pos]; |
| s->state_out_pos++; |
| s->strm->avail_out--; |
| s->strm->next_out++; |
| s->strm->total_out_lo32++; |
| if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++; |
| } |
| |
| return progress_out; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| static |
| Bool handle_compress ( bz_stream* strm ) |
| { |
| Bool progress_in = False; |
| Bool progress_out = False; |
| EState* s = strm->state; |
| |
| while (True) { |
| |
| if (s->state == BZ_S_OUTPUT) { |
| progress_out |= copy_output_until_stop ( s ); |
| if (s->state_out_pos < s->numZ) break; |
| if (s->mode == BZ_M_FINISHING && |
| s->avail_in_expect == 0 && |
| isempty_RL(s)) break; |
| prepare_new_block ( s ); |
| s->state = BZ_S_INPUT; |
| if (s->mode == BZ_M_FLUSHING && |
| s->avail_in_expect == 0 && |
| isempty_RL(s)) break; |
| } |
| |
| if (s->state == BZ_S_INPUT) { |
| progress_in |= copy_input_until_stop ( s ); |
| if (s->mode != BZ_M_RUNNING && s->avail_in_expect == 0) { |
| flush_RL ( s ); |
| BZ2_compressBlock ( s, (Bool)(s->mode == BZ_M_FINISHING) ); |
| s->state = BZ_S_OUTPUT; |
| } |
| else |
| if (s->nblock >= s->nblockMAX) { |
| BZ2_compressBlock ( s, False ); |
| s->state = BZ_S_OUTPUT; |
| } |
| else |
| if (s->strm->avail_in == 0) { |
| break; |
| } |
| } |
| |
| } |
| |
| return progress_in || progress_out; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| int BZ_API(BZ2_bzCompress) ( bz_stream *strm, int action ) |
| { |
| Bool progress; |
| EState* s; |
| if (strm == NULL) return BZ_PARAM_ERROR; |
| s = strm->state; |
| if (s == NULL) return BZ_PARAM_ERROR; |
| if (s->strm != strm) return BZ_PARAM_ERROR; |
| |
| preswitch: |
| switch (s->mode) { |
| |
| case BZ_M_IDLE: |
| return BZ_SEQUENCE_ERROR; |
| |
| case BZ_M_RUNNING: |
| if (action == BZ_RUN) { |
| progress = handle_compress ( strm ); |
| return progress ? BZ_RUN_OK : BZ_PARAM_ERROR; |
| } |
| else |
| if (action == BZ_FLUSH) { |
| s->avail_in_expect = strm->avail_in; |
| s->mode = BZ_M_FLUSHING; |
| goto preswitch; |
| } |
| else |
| if (action == BZ_FINISH) { |
| s->avail_in_expect = strm->avail_in; |
| s->mode = BZ_M_FINISHING; |
| goto preswitch; |
| } |
| else |
| return BZ_PARAM_ERROR; |
| |
| case BZ_M_FLUSHING: |
| if (action != BZ_FLUSH) return BZ_SEQUENCE_ERROR; |
| if (s->avail_in_expect != s->strm->avail_in) |
| return BZ_SEQUENCE_ERROR; |
| progress = handle_compress ( strm ); |
| if (s->avail_in_expect > 0 || !isempty_RL(s) || |
| s->state_out_pos < s->numZ) return BZ_FLUSH_OK; |
| s->mode = BZ_M_RUNNING; |
| return BZ_RUN_OK; |
| |
| case BZ_M_FINISHING: |
| if (action != BZ_FINISH) return BZ_SEQUENCE_ERROR; |
| if (s->avail_in_expect != s->strm->avail_in) |
| return BZ_SEQUENCE_ERROR; |
| progress = handle_compress ( strm ); |
| if (!progress) return BZ_SEQUENCE_ERROR; |
| if (s->avail_in_expect > 0 || !isempty_RL(s) || |
| s->state_out_pos < s->numZ) return BZ_FINISH_OK; |
| s->mode = BZ_M_IDLE; |
| return BZ_STREAM_END; |
| } |
| return BZ_OK; /*--not reached--*/ |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| int BZ_API(BZ2_bzCompressEnd) ( bz_stream *strm ) |
| { |
| EState* s; |
| if (strm == NULL) return BZ_PARAM_ERROR; |
| s = strm->state; |
| if (s == NULL) return BZ_PARAM_ERROR; |
| if (s->strm != strm) return BZ_PARAM_ERROR; |
| |
| if (s->arr1 != NULL) BZFREE(s->arr1); |
| if (s->arr2 != NULL) BZFREE(s->arr2); |
| if (s->ftab != NULL) BZFREE(s->ftab); |
| BZFREE(strm->state); |
| |
| strm->state = NULL; |
| |
| return BZ_OK; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| /*--- Decompression stuff ---*/ |
| /*---------------------------------------------------*/ |
| |
| /*---------------------------------------------------*/ |
| int BZ_API(BZ2_bzDecompressInit) |
| ( bz_stream* strm, |
| int verbosity, |
| int small ) |
| { |
| DState* s; |
| |
| if (!bz_config_ok()) return BZ_CONFIG_ERROR; |
| |
| if (strm == NULL) return BZ_PARAM_ERROR; |
| if (small != 0 && small != 1) return BZ_PARAM_ERROR; |
| if (verbosity < 0 || verbosity > 4) return BZ_PARAM_ERROR; |
| |
| if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc; |
| if (strm->bzfree == NULL) strm->bzfree = default_bzfree; |
| |
| s = BZALLOC( sizeof(DState) ); |
| if (s == NULL) return BZ_MEM_ERROR; |
| s->strm = strm; |
| strm->state = s; |
| s->state = BZ_X_MAGIC_1; |
| s->bsLive = 0; |
| s->bsBuff = 0; |
| s->calculatedCombinedCRC = 0; |
| strm->total_in_lo32 = 0; |
| strm->total_in_hi32 = 0; |
| strm->total_out_lo32 = 0; |
| strm->total_out_hi32 = 0; |
| s->smallDecompress = (Bool)small; |
| s->ll4 = NULL; |
| s->ll16 = NULL; |
| s->tt = NULL; |
| s->currBlockNo = 0; |
| s->verbosity = verbosity; |
| |
| return BZ_OK; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| /* Return True iff data corruption is discovered. |
| Returns False if there is no problem. |
| */ |
| static |
| Bool unRLE_obuf_to_output_FAST ( DState* s ) |
| { |
| UChar k1; |
| |
| if (s->blockRandomised) { |
| |
| while (True) { |
| /* try to finish existing run */ |
| while (True) { |
| if (s->strm->avail_out == 0) return False; |
| if (s->state_out_len == 0) break; |
| *( (UChar*)(s->strm->next_out) ) = s->state_out_ch; |
| BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch ); |
| s->state_out_len--; |
| s->strm->next_out++; |
| s->strm->avail_out--; |
| s->strm->total_out_lo32++; |
| if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++; |
| } |
| |
| /* can a new run be started? */ |
| if (s->nblock_used == s->save_nblock+1) return False; |
| |
| /* Only caused by corrupt data stream? */ |
| if (s->nblock_used > s->save_nblock+1) |
| return True; |
| |
| s->state_out_len = 1; |
| s->state_out_ch = s->k0; |
| BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; |
| k1 ^= BZ_RAND_MASK; s->nblock_used++; |
| if (s->nblock_used == s->save_nblock+1) continue; |
| if (k1 != s->k0) { s->k0 = k1; continue; }; |
| |
| s->state_out_len = 2; |
| BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; |
| k1 ^= BZ_RAND_MASK; s->nblock_used++; |
| if (s->nblock_used == s->save_nblock+1) continue; |
| if (k1 != s->k0) { s->k0 = k1; continue; }; |
| |
| s->state_out_len = 3; |
| BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; |
| k1 ^= BZ_RAND_MASK; s->nblock_used++; |
| if (s->nblock_used == s->save_nblock+1) continue; |
| if (k1 != s->k0) { s->k0 = k1; continue; }; |
| |
| BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; |
| k1 ^= BZ_RAND_MASK; s->nblock_used++; |
| s->state_out_len = ((Int32)k1) + 4; |
| BZ_GET_FAST(s->k0); BZ_RAND_UPD_MASK; |
| s->k0 ^= BZ_RAND_MASK; s->nblock_used++; |
| } |
| |
| } else { |
| |
| /* restore */ |
| UInt32 c_calculatedBlockCRC = s->calculatedBlockCRC; |
| UChar c_state_out_ch = s->state_out_ch; |
| Int32 c_state_out_len = s->state_out_len; |
| Int32 c_nblock_used = s->nblock_used; |
| Int32 c_k0 = s->k0; |
| UInt32* c_tt = s->tt; |
| UInt32 c_tPos = s->tPos; |
| char* cs_next_out = s->strm->next_out; |
| unsigned int cs_avail_out = s->strm->avail_out; |
| /* end restore */ |
| |
| UInt32 avail_out_INIT = cs_avail_out; |
| Int32 s_save_nblockPP = s->save_nblock+1; |
| unsigned int total_out_lo32_old; |
| |
| while (True) { |
| |
| /* try to finish existing run */ |
| if (c_state_out_len > 0) { |
| while (True) { |
| if (cs_avail_out == 0) goto return_notr; |
| if (c_state_out_len == 1) break; |
| *( (UChar*)(cs_next_out) ) = c_state_out_ch; |
| BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch ); |
| c_state_out_len--; |
| cs_next_out++; |
| cs_avail_out--; |
| } |
| s_state_out_len_eq_one: |
| { |
| if (cs_avail_out == 0) { |
| c_state_out_len = 1; goto return_notr; |
| }; |
| *( (UChar*)(cs_next_out) ) = c_state_out_ch; |
| BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch ); |
| cs_next_out++; |
| cs_avail_out--; |
| } |
| } |
| /* Only caused by corrupt data stream? */ |
| if (c_nblock_used > s_save_nblockPP) |
| return True; |
| |
| /* can a new run be started? */ |
| if (c_nblock_used == s_save_nblockPP) { |
| c_state_out_len = 0; goto return_notr; |
| }; |
| c_state_out_ch = c_k0; |
| BZ_GET_FAST_C(k1); c_nblock_used++; |
| if (k1 != c_k0) { |
| c_k0 = k1; goto s_state_out_len_eq_one; |
| }; |
| if (c_nblock_used == s_save_nblockPP) |
| goto s_state_out_len_eq_one; |
| |
| c_state_out_len = 2; |
| BZ_GET_FAST_C(k1); c_nblock_used++; |
| if (c_nblock_used == s_save_nblockPP) continue; |
| if (k1 != c_k0) { c_k0 = k1; continue; }; |
| |
| c_state_out_len = 3; |
| BZ_GET_FAST_C(k1); c_nblock_used++; |
| if (c_nblock_used == s_save_nblockPP) continue; |
| if (k1 != c_k0) { c_k0 = k1; continue; }; |
| |
| BZ_GET_FAST_C(k1); c_nblock_used++; |
| c_state_out_len = ((Int32)k1) + 4; |
| BZ_GET_FAST_C(c_k0); c_nblock_used++; |
| } |
| |
| return_notr: |
| total_out_lo32_old = s->strm->total_out_lo32; |
| s->strm->total_out_lo32 += (avail_out_INIT - cs_avail_out); |
| if (s->strm->total_out_lo32 < total_out_lo32_old) |
| s->strm->total_out_hi32++; |
| |
| /* save */ |
| s->calculatedBlockCRC = c_calculatedBlockCRC; |
| s->state_out_ch = c_state_out_ch; |
| s->state_out_len = c_state_out_len; |
| s->nblock_used = c_nblock_used; |
| s->k0 = c_k0; |
| s->tt = c_tt; |
| s->tPos = c_tPos; |
| s->strm->next_out = cs_next_out; |
| s->strm->avail_out = cs_avail_out; |
| /* end save */ |
| } |
| return False; |
| } |
| |
| |
| |
| /*---------------------------------------------------*/ |
| /* Return True iff data corruption is discovered. |
| Returns False if there is no problem. |
| */ |
| static |
| Bool unRLE_obuf_to_output_SMALL ( DState* s ) |
| { |
| UChar k1; |
| |
| if (s->blockRandomised) { |
| |
| while (True) { |
| /* try to finish existing run */ |
| while (True) { |
| if (s->strm->avail_out == 0) return False; |
| if (s->state_out_len == 0) break; |
| *( (UChar*)(s->strm->next_out) ) = s->state_out_ch; |
| BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch ); |
| s->state_out_len--; |
| s->strm->next_out++; |
| s->strm->avail_out--; |
| s->strm->total_out_lo32++; |
| if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++; |
| } |
| |
| /* can a new run be started? */ |
| if (s->nblock_used == s->save_nblock+1) return False; |
| |
| /* Only caused by corrupt data stream? */ |
| if (s->nblock_used > s->save_nblock+1) |
| return True; |
| |
| s->state_out_len = 1; |
| s->state_out_ch = s->k0; |
| BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; |
| k1 ^= BZ_RAND_MASK; s->nblock_used++; |
| if (s->nblock_used == s->save_nblock+1) continue; |
| if (k1 != s->k0) { s->k0 = k1; continue; }; |
| |
| s->state_out_len = 2; |
| BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; |
| k1 ^= BZ_RAND_MASK; s->nblock_used++; |
| if (s->nblock_used == s->save_nblock+1) continue; |
| if (k1 != s->k0) { s->k0 = k1; continue; }; |
| |
| s->state_out_len = 3; |
| BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; |
| k1 ^= BZ_RAND_MASK; s->nblock_used++; |
| if (s->nblock_used == s->save_nblock+1) continue; |
| if (k1 != s->k0) { s->k0 = k1; continue; }; |
| |
| BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; |
| k1 ^= BZ_RAND_MASK; s->nblock_used++; |
| s->state_out_len = ((Int32)k1) + 4; |
| BZ_GET_SMALL(s->k0); BZ_RAND_UPD_MASK; |
| s->k0 ^= BZ_RAND_MASK; s->nblock_used++; |
| } |
| |
| } else { |
| |
| while (True) { |
| /* try to finish existing run */ |
| while (True) { |
| if (s->strm->avail_out == 0) return False; |
| if (s->state_out_len == 0) break; |
| *( (UChar*)(s->strm->next_out) ) = s->state_out_ch; |
| BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch ); |
| s->state_out_len--; |
| s->strm->next_out++; |
| s->strm->avail_out--; |
| s->strm->total_out_lo32++; |
| if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++; |
| } |
| |
| /* can a new run be started? */ |
| if (s->nblock_used == s->save_nblock+1) return False; |
| |
| /* Only caused by corrupt data stream? */ |
| if (s->nblock_used > s->save_nblock+1) |
| return True; |
| |
| s->state_out_len = 1; |
| s->state_out_ch = s->k0; |
| BZ_GET_SMALL(k1); s->nblock_used++; |
| if (s->nblock_used == s->save_nblock+1) continue; |
| if (k1 != s->k0) { s->k0 = k1; continue; }; |
| |
| s->state_out_len = 2; |
| BZ_GET_SMALL(k1); s->nblock_used++; |
| if (s->nblock_used == s->save_nblock+1) continue; |
| if (k1 != s->k0) { s->k0 = k1; continue; }; |
| |
| s->state_out_len = 3; |
| BZ_GET_SMALL(k1); s->nblock_used++; |
| if (s->nblock_used == s->save_nblock+1) continue; |
| if (k1 != s->k0) { s->k0 = k1; continue; }; |
| |
| BZ_GET_SMALL(k1); s->nblock_used++; |
| s->state_out_len = ((Int32)k1) + 4; |
| BZ_GET_SMALL(s->k0); s->nblock_used++; |
| } |
| |
| } |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| int BZ_API(BZ2_bzDecompress) ( bz_stream *strm ) |
| { |
| Bool corrupt; |
| DState* s; |
| if (strm == NULL) return BZ_PARAM_ERROR; |
| s = strm->state; |
| if (s == NULL) return BZ_PARAM_ERROR; |
| if (s->strm != strm) return BZ_PARAM_ERROR; |
| |
| while (True) { |
| if (s->state == BZ_X_IDLE) return BZ_SEQUENCE_ERROR; |
| if (s->state == BZ_X_OUTPUT) { |
| if (s->smallDecompress) |
| corrupt = unRLE_obuf_to_output_SMALL ( s ); else |
| corrupt = unRLE_obuf_to_output_FAST ( s ); |
| if (corrupt) return BZ_DATA_ERROR; |
| if (s->nblock_used == s->save_nblock+1 && s->state_out_len == 0) { |
| BZ_FINALISE_CRC ( s->calculatedBlockCRC ); |
| if (s->verbosity >= 3) |
| VPrintf2 ( " {0x%08x, 0x%08x}", s->storedBlockCRC, |
| s->calculatedBlockCRC ); |
| if (s->verbosity >= 2) VPrintf0 ( "]" ); |
| if (s->calculatedBlockCRC != s->storedBlockCRC) |
| return BZ_DATA_ERROR; |
| s->calculatedCombinedCRC |
| = (s->calculatedCombinedCRC << 1) | |
| (s->calculatedCombinedCRC >> 31); |
| s->calculatedCombinedCRC ^= s->calculatedBlockCRC; |
| s->state = BZ_X_BLKHDR_1; |
| } else { |
| return BZ_OK; |
| } |
| } |
| if (s->state >= BZ_X_MAGIC_1) { |
| Int32 r = BZ2_decompress ( s ); |
| if (r == BZ_STREAM_END) { |
| if (s->verbosity >= 3) |
| VPrintf2 ( "\n combined CRCs: stored = 0x%08x, computed = 0x%08x", |
| s->storedCombinedCRC, s->calculatedCombinedCRC ); |
| if (s->calculatedCombinedCRC != s->storedCombinedCRC) |
| return BZ_DATA_ERROR; |
| return r; |
| } |
| if (s->state != BZ_X_OUTPUT) return r; |
| } |
| } |
| |
| AssertH ( 0, 6001 ); |
| |
| return 0; /*NOTREACHED*/ |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| int BZ_API(BZ2_bzDecompressEnd) ( bz_stream *strm ) |
| { |
| DState* s; |
| if (strm == NULL) return BZ_PARAM_ERROR; |
| s = strm->state; |
| if (s == NULL) return BZ_PARAM_ERROR; |
| if (s->strm != strm) return BZ_PARAM_ERROR; |
| |
| if (s->tt != NULL) BZFREE(s->tt); |
| if (s->ll16 != NULL) BZFREE(s->ll16); |
| if (s->ll4 != NULL) BZFREE(s->ll4); |
| |
| BZFREE(strm->state); |
| strm->state = NULL; |
| |
| return BZ_OK; |
| } |
| |
| |
| #ifndef BZ_NO_STDIO |
| /*---------------------------------------------------*/ |
| /*--- File I/O stuff ---*/ |
| /*---------------------------------------------------*/ |
| |
| #define BZ_SETERR(eee) \ |
| { \ |
| if (bzerror != NULL) *bzerror = eee; \ |
| if (bzf != NULL) bzf->lastErr = eee; \ |
| } |
| |
| typedef |
| struct { |
| FILE* handle; |
| Char buf[BZ_MAX_UNUSED]; |
| Int32 bufN; |
| Bool writing; |
| bz_stream strm; |
| Int32 lastErr; |
| Bool initialisedOk; |
| } |
| bzFile; |
| |
| |
| /*---------------------------------------------*/ |
| static Bool myfeof ( FILE* f ) |
| { |
| Int32 c = fgetc ( f ); |
| if (c == EOF) return True; |
| ungetc ( c, f ); |
| return False; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| BZFILE* BZ_API(BZ2_bzWriteOpen) |
| ( int* bzerror, |
| FILE* f, |
| int blockSize100k, |
| int verbosity, |
| int workFactor ) |
| { |
| Int32 ret; |
| bzFile* bzf = NULL; |
| |
| BZ_SETERR(BZ_OK); |
| |
| if (f == NULL || |
| (blockSize100k < 1 || blockSize100k > 9) || |
| (workFactor < 0 || workFactor > 250) || |
| (verbosity < 0 || verbosity > 4)) |
| { BZ_SETERR(BZ_PARAM_ERROR); return NULL; }; |
| |
| if (ferror(f)) |
| { BZ_SETERR(BZ_IO_ERROR); return NULL; }; |
| |
| bzf = malloc ( sizeof(bzFile) ); |
| if (bzf == NULL) |
| { BZ_SETERR(BZ_MEM_ERROR); return NULL; }; |
| |
| BZ_SETERR(BZ_OK); |
| bzf->initialisedOk = False; |
| bzf->bufN = 0; |
| bzf->handle = f; |
| bzf->writing = True; |
| bzf->strm.bzalloc = NULL; |
| bzf->strm.bzfree = NULL; |
| bzf->strm.opaque = NULL; |
| |
| if (workFactor == 0) workFactor = 30; |
| ret = BZ2_bzCompressInit ( &(bzf->strm), blockSize100k, |
| verbosity, workFactor ); |
| if (ret != BZ_OK) |
| { BZ_SETERR(ret); free(bzf); return NULL; }; |
| |
| bzf->strm.avail_in = 0; |
| bzf->initialisedOk = True; |
| return bzf; |
| } |
| |
| |
| |
| /*---------------------------------------------------*/ |
| void BZ_API(BZ2_bzWrite) |
| ( int* bzerror, |
| BZFILE* b, |
| void* buf, |
| int len ) |
| { |
| Int32 n, n2, ret; |
| bzFile* bzf = (bzFile*)b; |
| |
| BZ_SETERR(BZ_OK); |
| if (bzf == NULL || buf == NULL || len < 0) |
| { BZ_SETERR(BZ_PARAM_ERROR); return; }; |
| if (!(bzf->writing)) |
| { BZ_SETERR(BZ_SEQUENCE_ERROR); return; }; |
| if (ferror(bzf->handle)) |
| { BZ_SETERR(BZ_IO_ERROR); return; }; |
| |
| if (len == 0) |
| { BZ_SETERR(BZ_OK); return; }; |
| |
| bzf->strm.avail_in = len; |
| bzf->strm.next_in = buf; |
| |
| while (True) { |
| bzf->strm.avail_out = BZ_MAX_UNUSED; |
| bzf->strm.next_out = bzf->buf; |
| ret = BZ2_bzCompress ( &(bzf->strm), BZ_RUN ); |
| if (ret != BZ_RUN_OK) |
| { BZ_SETERR(ret); return; }; |
| |
| if (bzf->strm.avail_out < BZ_MAX_UNUSED) { |
| n = BZ_MAX_UNUSED - bzf->strm.avail_out; |
| n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar), |
| n, bzf->handle ); |
| if (n != n2 || ferror(bzf->handle)) |
| { BZ_SETERR(BZ_IO_ERROR); return; }; |
| } |
| |
| if (bzf->strm.avail_in == 0) |
| { BZ_SETERR(BZ_OK); return; }; |
| } |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| void BZ_API(BZ2_bzWriteClose) |
| ( int* bzerror, |
| BZFILE* b, |
| int abandon, |
| unsigned int* nbytes_in, |
| unsigned int* nbytes_out ) |
| { |
| BZ2_bzWriteClose64 ( bzerror, b, abandon, |
| nbytes_in, NULL, nbytes_out, NULL ); |
| } |
| |
| |
| void BZ_API(BZ2_bzWriteClose64) |
| ( int* bzerror, |
| BZFILE* b, |
| int abandon, |
| unsigned int* nbytes_in_lo32, |
| unsigned int* nbytes_in_hi32, |
| unsigned int* nbytes_out_lo32, |
| unsigned int* nbytes_out_hi32 ) |
| { |
| Int32 n, n2, ret; |
| bzFile* bzf = (bzFile*)b; |
| |
| if (bzf == NULL) |
| { BZ_SETERR(BZ_OK); return; }; |
| if (!(bzf->writing)) |
| { BZ_SETERR(BZ_SEQUENCE_ERROR); return; }; |
| if (ferror(bzf->handle)) |
| { BZ_SETERR(BZ_IO_ERROR); return; }; |
| |
| if (nbytes_in_lo32 != NULL) *nbytes_in_lo32 = 0; |
| if (nbytes_in_hi32 != NULL) *nbytes_in_hi32 = 0; |
| if (nbytes_out_lo32 != NULL) *nbytes_out_lo32 = 0; |
| if (nbytes_out_hi32 != NULL) *nbytes_out_hi32 = 0; |
| |
| if ((!abandon) && bzf->lastErr == BZ_OK) { |
| while (True) { |
| bzf->strm.avail_out = BZ_MAX_UNUSED; |
| bzf->strm.next_out = bzf->buf; |
| ret = BZ2_bzCompress ( &(bzf->strm), BZ_FINISH ); |
| if (ret != BZ_FINISH_OK && ret != BZ_STREAM_END) |
| { BZ_SETERR(ret); return; }; |
| |
| if (bzf->strm.avail_out < BZ_MAX_UNUSED) { |
| n = BZ_MAX_UNUSED - bzf->strm.avail_out; |
| n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar), |
| n, bzf->handle ); |
| if (n != n2 || ferror(bzf->handle)) |
| { BZ_SETERR(BZ_IO_ERROR); return; }; |
| } |
| |
| if (ret == BZ_STREAM_END) break; |
| } |
| } |
| |
| if ( !abandon && !ferror ( bzf->handle ) ) { |
| fflush ( bzf->handle ); |
| if (ferror(bzf->handle)) |
| { BZ_SETERR(BZ_IO_ERROR); return; }; |
| } |
| |
| if (nbytes_in_lo32 != NULL) |
| *nbytes_in_lo32 = bzf->strm.total_in_lo32; |
| if (nbytes_in_hi32 != NULL) |
| *nbytes_in_hi32 = bzf->strm.total_in_hi32; |
| if (nbytes_out_lo32 != NULL) |
| *nbytes_out_lo32 = bzf->strm.total_out_lo32; |
| if (nbytes_out_hi32 != NULL) |
| *nbytes_out_hi32 = bzf->strm.total_out_hi32; |
| |
| BZ_SETERR(BZ_OK); |
| BZ2_bzCompressEnd ( &(bzf->strm) ); |
| free ( bzf ); |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| BZFILE* BZ_API(BZ2_bzReadOpen) |
| ( int* bzerror, |
| FILE* f, |
| int verbosity, |
| int small, |
| void* unused, |
| int nUnused ) |
| { |
| bzFile* bzf = NULL; |
| int ret; |
| |
| BZ_SETERR(BZ_OK); |
| |
| if (f == NULL || |
| (small != 0 && small != 1) || |
| (verbosity < 0 || verbosity > 4) || |
| (unused == NULL && nUnused != 0) || |
| (unused != NULL && (nUnused < 0 || nUnused > BZ_MAX_UNUSED))) |
| { BZ_SETERR(BZ_PARAM_ERROR); return NULL; }; |
| |
| if (ferror(f)) |
| { BZ_SETERR(BZ_IO_ERROR); return NULL; }; |
| |
| bzf = malloc ( sizeof(bzFile) ); |
| if (bzf == NULL) |
| { BZ_SETERR(BZ_MEM_ERROR); return NULL; }; |
| |
| BZ_SETERR(BZ_OK); |
| |
| bzf->initialisedOk = False; |
| bzf->handle = f; |
| bzf->bufN = 0; |
| bzf->writing = False; |
| bzf->strm.bzalloc = NULL; |
| bzf->strm.bzfree = NULL; |
| bzf->strm.opaque = NULL; |
| |
| while (nUnused > 0) { |
| bzf->buf[bzf->bufN] = *((UChar*)(unused)); bzf->bufN++; |
| unused = ((void*)( 1 + ((UChar*)(unused)) )); |
| nUnused--; |
| } |
| |
| ret = BZ2_bzDecompressInit ( &(bzf->strm), verbosity, small ); |
| if (ret != BZ_OK) |
| { BZ_SETERR(ret); free(bzf); return NULL; }; |
| |
| bzf->strm.avail_in = bzf->bufN; |
| bzf->strm.next_in = bzf->buf; |
| |
| bzf->initialisedOk = True; |
| return bzf; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| void BZ_API(BZ2_bzReadClose) ( int *bzerror, BZFILE *b ) |
| { |
| bzFile* bzf = (bzFile*)b; |
| |
| BZ_SETERR(BZ_OK); |
| if (bzf == NULL) |
| { BZ_SETERR(BZ_OK); return; }; |
| |
| if (bzf->writing) |
| { BZ_SETERR(BZ_SEQUENCE_ERROR); return; }; |
| |
| if (bzf->initialisedOk) |
| (void)BZ2_bzDecompressEnd ( &(bzf->strm) ); |
| free ( bzf ); |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| int BZ_API(BZ2_bzRead) |
| ( int* bzerror, |
| BZFILE* b, |
| void* buf, |
| int len ) |
| { |
| Int32 n, ret; |
| bzFile* bzf = (bzFile*)b; |
| |
| BZ_SETERR(BZ_OK); |
| |
| if (bzf == NULL || buf == NULL || len < 0) |
| { BZ_SETERR(BZ_PARAM_ERROR); return 0; }; |
| |
| if (bzf->writing) |
| { BZ_SETERR(BZ_SEQUENCE_ERROR); return 0; }; |
| |
| if (len == 0) |
| { BZ_SETERR(BZ_OK); return 0; }; |
| |
| bzf->strm.avail_out = len; |
| bzf->strm.next_out = buf; |
| |
| while (True) { |
| |
| if (ferror(bzf->handle)) |
| { BZ_SETERR(BZ_IO_ERROR); return 0; }; |
| |
| if (bzf->strm.avail_in == 0 && !myfeof(bzf->handle)) { |
| n = fread ( bzf->buf, sizeof(UChar), |
| BZ_MAX_UNUSED, bzf->handle ); |
| if (ferror(bzf->handle)) |
| { BZ_SETERR(BZ_IO_ERROR); return 0; }; |
| bzf->bufN = n; |
| bzf->strm.avail_in = bzf->bufN; |
| bzf->strm.next_in = bzf->buf; |
| } |
| |
| ret = BZ2_bzDecompress ( &(bzf->strm) ); |
| |
| if (ret != BZ_OK && ret != BZ_STREAM_END) |
| { BZ_SETERR(ret); return 0; }; |
| |
| if (ret == BZ_OK && myfeof(bzf->handle) && |
| bzf->strm.avail_in == 0 && bzf->strm.avail_out > 0) |
| { BZ_SETERR(BZ_UNEXPECTED_EOF); return 0; }; |
| |
| if (ret == BZ_STREAM_END) |
| { BZ_SETERR(BZ_STREAM_END); |
| return len - bzf->strm.avail_out; }; |
| if (bzf->strm.avail_out == 0) |
| { BZ_SETERR(BZ_OK); return len; }; |
| |
| } |
| |
| return 0; /*not reached*/ |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| void BZ_API(BZ2_bzReadGetUnused) |
| ( int* bzerror, |
| BZFILE* b, |
| void** unused, |
| int* nUnused ) |
| { |
| bzFile* bzf = (bzFile*)b; |
| if (bzf == NULL) |
| { BZ_SETERR(BZ_PARAM_ERROR); return; }; |
| if (bzf->lastErr != BZ_STREAM_END) |
| { BZ_SETERR(BZ_SEQUENCE_ERROR); return; }; |
| if (unused == NULL || nUnused == NULL) |
| { BZ_SETERR(BZ_PARAM_ERROR); return; }; |
| |
| BZ_SETERR(BZ_OK); |
| *nUnused = bzf->strm.avail_in; |
| *unused = bzf->strm.next_in; |
| } |
| #endif |
| |
| |
| /*---------------------------------------------------*/ |
| /*--- Misc convenience stuff ---*/ |
| /*---------------------------------------------------*/ |
| |
| /*---------------------------------------------------*/ |
| int BZ_API(BZ2_bzBuffToBuffCompress) |
| ( char* dest, |
| unsigned int* destLen, |
| char* source, |
| unsigned int sourceLen, |
| int blockSize100k, |
| int verbosity, |
| int workFactor ) |
| { |
| bz_stream strm; |
| int ret; |
| |
| if (dest == NULL || destLen == NULL || |
| source == NULL || |
| blockSize100k < 1 || blockSize100k > 9 || |
| verbosity < 0 || verbosity > 4 || |
| workFactor < 0 || workFactor > 250) |
| return BZ_PARAM_ERROR; |
| |
| if (workFactor == 0) workFactor = 30; |
| strm.bzalloc = NULL; |
| strm.bzfree = NULL; |
| strm.opaque = NULL; |
| ret = BZ2_bzCompressInit ( &strm, blockSize100k, |
| verbosity, workFactor ); |
| if (ret != BZ_OK) return ret; |
| |
| strm.next_in = source; |
| strm.next_out = dest; |
| strm.avail_in = sourceLen; |
| strm.avail_out = *destLen; |
| |
| ret = BZ2_bzCompress ( &strm, BZ_FINISH ); |
| if (ret == BZ_FINISH_OK) goto output_overflow; |
| if (ret != BZ_STREAM_END) goto errhandler; |
| |
| /* normal termination */ |
| *destLen -= strm.avail_out; |
| BZ2_bzCompressEnd ( &strm ); |
| return BZ_OK; |
| |
| output_overflow: |
| BZ2_bzCompressEnd ( &strm ); |
| return BZ_OUTBUFF_FULL; |
| |
| errhandler: |
| BZ2_bzCompressEnd ( &strm ); |
| return ret; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| int BZ_API(BZ2_bzBuffToBuffDecompress) |
| ( char* dest, |
| unsigned int* destLen, |
| char* source, |
| unsigned int sourceLen, |
| int small, |
| int verbosity ) |
| { |
| bz_stream strm; |
| int ret; |
| |
| if (dest == NULL || destLen == NULL || |
| source == NULL || |
| (small != 0 && small != 1) || |
| verbosity < 0 || verbosity > 4) |
| return BZ_PARAM_ERROR; |
| |
| strm.bzalloc = NULL; |
| strm.bzfree = NULL; |
| strm.opaque = NULL; |
| ret = BZ2_bzDecompressInit ( &strm, verbosity, small ); |
| if (ret != BZ_OK) return ret; |
| |
| strm.next_in = source; |
| strm.next_out = dest; |
| strm.avail_in = sourceLen; |
| strm.avail_out = *destLen; |
| |
| ret = BZ2_bzDecompress ( &strm ); |
| if (ret == BZ_OK) goto output_overflow_or_eof; |
| if (ret != BZ_STREAM_END) goto errhandler; |
| |
| /* normal termination */ |
| *destLen -= strm.avail_out; |
| BZ2_bzDecompressEnd ( &strm ); |
| return BZ_OK; |
| |
| output_overflow_or_eof: |
| if (strm.avail_out > 0) { |
| BZ2_bzDecompressEnd ( &strm ); |
| return BZ_UNEXPECTED_EOF; |
| } else { |
| BZ2_bzDecompressEnd ( &strm ); |
| return BZ_OUTBUFF_FULL; |
| }; |
| |
| errhandler: |
| BZ2_bzDecompressEnd ( &strm ); |
| return ret; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| /*-- |
| Code contributed by Yoshioka Tsuneo |
| (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp), |
| to support better zlib compatibility. |
| This code is not _officially_ part of libbzip2 (yet); |
| I haven't tested it, documented it, or considered the |
| threading-safeness of it. |
| If this code breaks, please contact both Yoshioka and me. |
| --*/ |
| /*---------------------------------------------------*/ |
| |
| /*---------------------------------------------------*/ |
| /*-- |
| return version like "0.9.0c". |
| --*/ |
| const char * BZ_API(BZ2_bzlibVersion)(void) |
| { |
| return BZ_VERSION; |
| } |
| |
| |
| #ifndef BZ_NO_STDIO |
| /*---------------------------------------------------*/ |
| |
| #if defined(_WIN32) || defined(OS2) || defined(MSDOS) |
| # include <fcntl.h> |
| # include <io.h> |
| # define SET_BINARY_MODE(file) setmode(fileno(file),O_BINARY) |
| #else |
| # define SET_BINARY_MODE(file) |
| #endif |
| static |
| BZFILE * bzopen_or_bzdopen |
| ( const char *path, /* no use when bzdopen */ |
| int fd, /* no use when bzdopen */ |
| const char *mode, |
| int open_mode) /* bzopen: 0, bzdopen:1 */ |
| { |
| int bzerr; |
| char unused[BZ_MAX_UNUSED]; |
| int blockSize100k = 9; |
| int writing = 0; |
| char mode2[10] = ""; |
| FILE *fp = NULL; |
| BZFILE *bzfp = NULL; |
| int verbosity = 0; |
| int workFactor = 30; |
| int smallMode = 0; |
| int nUnused = 0; |
| |
| if (mode == NULL) return NULL; |
| while (*mode) { |
| switch (*mode) { |
| case 'r': |
| writing = 0; break; |
| case 'w': |
| writing = 1; break; |
| case 's': |
| smallMode = 1; break; |
| default: |
| if (isdigit((int)(*mode))) { |
| blockSize100k = *mode-BZ_HDR_0; |
| } |
| } |
| mode++; |
| } |
| strcat(mode2, writing ? "w" : "r" ); |
| strcat(mode2,"b"); /* binary mode */ |
| |
| if (open_mode==0) { |
| if (path==NULL || strcmp(path,"")==0) { |
| fp = (writing ? stdout : stdin); |
| SET_BINARY_MODE(fp); |
| } else { |
| fp = fopen(path,mode2); |
| } |
| } else { |
| #ifdef BZ_STRICT_ANSI |
| fp = NULL; |
| #else |
| fp = fdopen(fd,mode2); |
| #endif |
| } |
| if (fp == NULL) return NULL; |
| |
| if (writing) { |
| /* Guard against total chaos and anarchy -- JRS */ |
| if (blockSize100k < 1) blockSize100k = 1; |
| if (blockSize100k > 9) blockSize100k = 9; |
| bzfp = BZ2_bzWriteOpen(&bzerr,fp,blockSize100k, |
| verbosity,workFactor); |
| } else { |
| bzfp = BZ2_bzReadOpen(&bzerr,fp,verbosity,smallMode, |
| unused,nUnused); |
| } |
| if (bzfp == NULL) { |
| if (fp != stdin && fp != stdout) fclose(fp); |
| return NULL; |
| } |
| return bzfp; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| /*-- |
| open file for read or write. |
| ex) bzopen("file","w9") |
| case path="" or NULL => use stdin or stdout. |
| --*/ |
| BZFILE * BZ_API(BZ2_bzopen) |
| ( const char *path, |
| const char *mode ) |
| { |
| return bzopen_or_bzdopen(path,-1,mode,/*bzopen*/0); |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| BZFILE * BZ_API(BZ2_bzdopen) |
| ( int fd, |
| const char *mode ) |
| { |
| return bzopen_or_bzdopen(NULL,fd,mode,/*bzdopen*/1); |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| int BZ_API(BZ2_bzread) (BZFILE* b, void* buf, int len ) |
| { |
| int bzerr, nread; |
| if (((bzFile*)b)->lastErr == BZ_STREAM_END) return 0; |
| nread = BZ2_bzRead(&bzerr,b,buf,len); |
| if (bzerr == BZ_OK || bzerr == BZ_STREAM_END) { |
| return nread; |
| } else { |
| return -1; |
| } |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| int BZ_API(BZ2_bzwrite) (BZFILE* b, void* buf, int len ) |
| { |
| int bzerr; |
| |
| BZ2_bzWrite(&bzerr,b,buf,len); |
| if(bzerr == BZ_OK){ |
| return len; |
| }else{ |
| return -1; |
| } |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| int BZ_API(BZ2_bzflush) (BZFILE *b) |
| { |
| /* do nothing now... */ |
| return 0; |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| void BZ_API(BZ2_bzclose) (BZFILE* b) |
| { |
| int bzerr; |
| FILE *fp = ((bzFile *)b)->handle; |
| |
| if (b==NULL) {return;} |
| if(((bzFile*)b)->writing){ |
| BZ2_bzWriteClose(&bzerr,b,0,NULL,NULL); |
| if(bzerr != BZ_OK){ |
| BZ2_bzWriteClose(NULL,b,1,NULL,NULL); |
| } |
| }else{ |
| BZ2_bzReadClose(&bzerr,b); |
| } |
| if(fp!=stdin && fp!=stdout){ |
| fclose(fp); |
| } |
| } |
| |
| |
| /*---------------------------------------------------*/ |
| /*-- |
| return last error code |
| --*/ |
| static char *bzerrorstrings[] = { |
| "OK" |
| ,"SEQUENCE_ERROR" |
| ,"PARAM_ERROR" |
| ,"MEM_ERROR" |
| ,"DATA_ERROR" |
| ,"DATA_ERROR_MAGIC" |
| ,"IO_ERROR" |
| ,"UNEXPECTED_EOF" |
| ,"OUTBUFF_FULL" |
| ,"CONFIG_ERROR" |
| ,"???" /* for future */ |
| ,"???" /* for future */ |
| ,"???" /* for future */ |
| ,"???" /* for future */ |
| ,"???" /* for future */ |
| ,"???" /* for future */ |
| }; |
| |
| |
| const char * BZ_API(BZ2_bzerror) (BZFILE *b, int *errnum) |
| { |
| int err = ((bzFile *)b)->lastErr; |
| |
| if(err>0) err = 0; |
| *errnum = err; |
| return bzerrorstrings[err*-1]; |
| } |
| #endif |
| |
| |
| /*-------------------------------------------------------------*/ |
| /*--- end bzlib.c ---*/ |
| /*-------------------------------------------------------------*/ |
| |
| |
| ///////////////////////////////////////////////////////////////////// |
| ///////////////////////////////////////////////////////////////////// |
| |
| |
| /* A test program written to test robustness to decompression of |
| corrupted data. Usage is |
| unzcrash filename |
| and the program will read the specified file, compress it (in memory), |
| and then repeatedly decompress it, each time with a different bit of |
| the compressed data inverted, so as to test all possible one-bit errors. |
| This should not cause any invalid memory accesses. If it does, |
| I want to know about it! |
| |
| p.s. As you can see from the above description, the process is |
| incredibly slow. A file of size eg 5KB will cause it to run for |
| many hours. |
| */ |
| |
| //#include <stdio.h> |
| //#include <assert.h> |
| //#include "bzlib.h" |
| |
| #define M_BLOCK 1000000 |
| |
| typedef unsigned char uchar; |
| |
| #define M_BLOCK_OUT (M_BLOCK + 1000000) |
| char inbuf[M_BLOCK]; |
| char outbuf[M_BLOCK_OUT]; |
| char zbuf[M_BLOCK + 600 + (M_BLOCK / 100)]; |
| |
| int nIn; |
| unsigned int nOut; |
| unsigned int nZ; |
| |
| #if 0 |
| static char *bzerrorstrings[] = { |
| "OK" |
| ,"SEQUENCE_ERROR" |
| ,"PARAM_ERROR" |
| ,"MEM_ERROR" |
| ,"DATA_ERROR" |
| ,"DATA_ERROR_MAGIC" |
| ,"IO_ERROR" |
| ,"UNEXPECTED_EOF" |
| ,"OUTBUFF_FULL" |
| ,"???" /* for future */ |
| ,"???" /* for future */ |
| ,"???" /* for future */ |
| ,"???" /* for future */ |
| ,"???" /* for future */ |
| ,"???" /* for future */ |
| }; |
| #endif |
| |
| void flip_bit ( int bit ) |
| { |
| int byteno = bit / 8; |
| int bitno = bit % 8; |
| uchar mask = 1 << bitno; |
| //fprintf ( stderr, "(byte %d bit %d mask %d)", |
| // byteno, bitno, (int)mask ); |
| zbuf[byteno] ^= mask; |
| } |
| |
| void set_inbuf ( void ) |
| { |
| inbuf[0] = 0; |
| my_strcat(inbuf, "At her sixtieth birthday party, Margaret Thatcher "); |
| my_strcat(inbuf, "blew on the cake to light the candles.\n"); |
| my_strcat(inbuf, "This program, bzip2, the associated library libbzip2, and all\n"); |
| my_strcat(inbuf, "documentation, are copyright (C) 1996-2004 Julian R Seward. All\n"); |
| my_strcat(inbuf, "rights reserved.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "Redistribution and use in source and binary forms, with or without\n"); |
| my_strcat(inbuf, "modification, are permitted provided that the following conditions\n"); |
| my_strcat(inbuf, "are met:\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "1. Redistributions of source code must retain the above copyright\n"); |
| my_strcat(inbuf, " notice, this list of conditions and the following disclaimer.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "2. The origin of this software must not be misrepresented; you must\n"); |
| my_strcat(inbuf, " not claim that you wrote the original software. If you use this\n"); |
| my_strcat(inbuf, " software in a product, an acknowledgment in the product\n"); |
| my_strcat(inbuf, " documentation would be appreciated but is not required.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "3. Altered source versions must be plainly marked as such, and must\n"); |
| my_strcat(inbuf, " not be misrepresented as being the original software.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "4. The name of the author may not be used to endorse or promote\n"); |
| my_strcat(inbuf, " products derived from this software without specific prior written\n"); |
| my_strcat(inbuf, " permission.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS\n"); |
| my_strcat(inbuf, "OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED\n"); |
| my_strcat(inbuf, "WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE\n"); |
| my_strcat(inbuf, "ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY\n"); |
| my_strcat(inbuf, "DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL\n"); |
| my_strcat(inbuf, "DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE\n"); |
| my_strcat(inbuf, "GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS\n"); |
| my_strcat(inbuf, "INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,\n"); |
| my_strcat(inbuf, "WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING\n"); |
| my_strcat(inbuf, "NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS\n"); |
| my_strcat(inbuf, "SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\n"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, "ababababababababababababababababababababababababababababababab"); |
| my_strcat(inbuf, " GNU GENERAL PUBLIC LICENSE\n"); |
| my_strcat(inbuf, " Version 2, June 1991\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " Copyright (C) 1989, 1991 Free Software Foundation, Inc.\n"); |
| my_strcat(inbuf, " 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA\n"); |
| my_strcat(inbuf, " Everyone is permitted to copy and distribute verbatim copies\n"); |
| my_strcat(inbuf, " of this license document, but changing it is not allowed.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " Preamble\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " The licenses for most software are designed to take away your\n"); |
| my_strcat(inbuf, "freedom to share and change it. By contrast, the GNU General Public\n"); |
| my_strcat(inbuf, "License is intended to guarantee your freedom to share and change free\n"); |
| my_strcat(inbuf, "software--to make sure the software is free for all its users. This\n"); |
| my_strcat(inbuf, "General Public License applies to most of the Free Software\n"); |
| my_strcat(inbuf, "Foundation's software and to any other program whose authors commit to\n"); |
| my_strcat(inbuf, "using it. (Some other Free Software Foundation software is covered by\n"); |
| my_strcat(inbuf, "the GNU Library General Public License instead.) You can apply it to\n"); |
| my_strcat(inbuf, "your programs, too.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " When we speak of free software, we are referring to freedom, not\n"); |
| my_strcat(inbuf, "price. Our General Public Licenses are designed to make sure that you\n"); |
| my_strcat(inbuf, "have the freedom to distribute copies of free software (and charge for\n"); |
| my_strcat(inbuf, "this service if you wish), that you receive source code or can get it\n"); |
| my_strcat(inbuf, "if you want it, that you can change the software or use pieces of it\n"); |
| my_strcat(inbuf, "in new free programs; and that you know you can do these things.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " To protect your rights, we need to make restrictions that forbid\n"); |
| my_strcat(inbuf, "anyone to deny you these rights or to ask you to surrender the rights.\n"); |
| my_strcat(inbuf, "These restrictions translate to certain responsibilities for you if you\n"); |
| my_strcat(inbuf, "distribute copies of the software, or if you modify it.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " For example, if you distribute copies of such a program, whether\n"); |
| my_strcat(inbuf, "gratis or for a fee, you must give the recipients all the rights that\n"); |
| my_strcat(inbuf, "you have. You must make sure that they, too, receive or can get the\n"); |
| my_strcat(inbuf, "source code. And you must show them these terms so they know their\n"); |
| my_strcat(inbuf, "rights.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " We protect your rights with two steps: (1) copyright the software, and\n"); |
| my_strcat(inbuf, "(2) offer you this license which gives you legal permission to copy,\n"); |
| my_strcat(inbuf, "distribute and/or modify the software.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " Also, for each author's protection and ours, we want to make certain\n"); |
| my_strcat(inbuf, "that everyone understands that there is no warranty for this free\n"); |
| my_strcat(inbuf, "software. If the software is modified by someone else and passed on, we\n"); |
| my_strcat(inbuf, "want its recipients to know that what they have is not the original, so\n"); |
| my_strcat(inbuf, "that any problems introduced by others will not reflect on the original\n"); |
| my_strcat(inbuf, "authors' reputations.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " Finally, any free program is threatened constantly by software\n"); |
| my_strcat(inbuf, "patents. We wish to avoid the danger that redistributors of a free\n"); |
| my_strcat(inbuf, "program will individually obtain patent licenses, in effect making the\n"); |
| my_strcat(inbuf, "program proprietary. To prevent this, we have made it clear that any\n"); |
| my_strcat(inbuf, "patent must be licensed for everyone's free use or not licensed at all.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " The precise terms and conditions for copying, distribution and\n"); |
| my_strcat(inbuf, "modification follow.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " GNU GENERAL PUBLIC LICENSE\n"); |
| my_strcat(inbuf, " TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " 0. This License applies to any program or other work which contains\n"); |
| my_strcat(inbuf, "a notice placed by the copyright holder saying it may be distributed\n"); |
| my_strcat(inbuf, "under the terms of this General Public License. The Program, below,\n"); |
| my_strcat(inbuf, "refers to any such program or work, and a work based on the Program\n"); |
| my_strcat(inbuf, "means either the Program or any derivative work under copyright law:\n"); |
| my_strcat(inbuf, "that is to say, a work containing the Program or a portion of it,\n"); |
| my_strcat(inbuf, "either verbatim or with modifications and/or translated into another\n"); |
| my_strcat(inbuf, "language. (Hereinafter, translation is included without limitation in\n"); |
| my_strcat(inbuf, "the term modification.) Each licensee is addressed as you.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "Activities other than copying, distribution and modification are not\n"); |
| my_strcat(inbuf, "covered by this License; they are outside its scope. The act of\n"); |
| my_strcat(inbuf, "running the Program is not restricted, and the output from the Program\n"); |
| my_strcat(inbuf, "is covered only if its contents constitute a work based on the\n"); |
| my_strcat(inbuf, "Program (independent of having been made by running the Program).\n"); |
| my_strcat(inbuf, "Whether that is true depends on what the Program does.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " 1. You may copy and distribute verbatim copies of the Program's\n"); |
| my_strcat(inbuf, "source code as you receive it, in any medium, provided that you\n"); |
| my_strcat(inbuf, "conspicuously and appropriately publish on each copy an appropriate\n"); |
| my_strcat(inbuf, "copyright notice and disclaimer of warranty; keep intact all the\n"); |
| my_strcat(inbuf, "notices that refer to this License and to the absence of any warranty;\n"); |
| my_strcat(inbuf, "and give any other recipients of the Program a copy of this License\n"); |
| my_strcat(inbuf, "along with the Program.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "You may charge a fee for the physical act of transferring a copy, and\n"); |
| my_strcat(inbuf, "you may at your option offer warranty protection in exchange for a fee.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " 2. You may modify your copy or copies of the Program or any portion\n"); |
| my_strcat(inbuf, "of it, thus forming a work based on the Program, and copy and\n"); |
| my_strcat(inbuf, "distribute such modifications or work under the terms of Section 1\n"); |
| my_strcat(inbuf, "above, provided that you also meet all of these conditions:\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " a) You must cause the modified files to carry prominent notices\n"); |
| my_strcat(inbuf, " stating that you changed the files and the date of any change.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " b) You must cause any work that you distribute or publish, that in\n"); |
| my_strcat(inbuf, " whole or in part contains or is derived from the Program or any\n"); |
| my_strcat(inbuf, " part thereof, to be licensed as a whole at no charge to all third\n"); |
| my_strcat(inbuf, " parties under the terms of this License.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " c) If the modified program normally reads commands interactively\n"); |
| my_strcat(inbuf, " when run, you must cause it, when started running for such\n"); |
| my_strcat(inbuf, " interactive use in the most ordinary way, to print or display an\n"); |
| my_strcat(inbuf, " announcement including an appropriate copyright notice and a\n"); |
| my_strcat(inbuf, " notice that there is no warranty (or else, saying that you provide\n"); |
| my_strcat(inbuf, " a warranty) and that users may redistribute the program under\n"); |
| my_strcat(inbuf, " these conditions, and telling the user how to view a copy of this\n"); |
| my_strcat(inbuf, " License. (Exception: if the Program itself is interactive but\n"); |
| my_strcat(inbuf, " does not normally print such an announcement, your work based on\n"); |
| my_strcat(inbuf, " the Program is not required to print an announcement.)\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "These requirements apply to the modified work as a whole. If\n"); |
| my_strcat(inbuf, "identifiable sections of that work are not derived from the Program,\n"); |
| my_strcat(inbuf, "and can be reasonably considered independent and separate works in\n"); |
| my_strcat(inbuf, "themselves, then this License, and its terms, do not apply to those\n"); |
| my_strcat(inbuf, "sections when you distribute them as separate works. But when you\n"); |
| my_strcat(inbuf, "distribute the same sections as part of a whole which is a work based\n"); |
| my_strcat(inbuf, "on the Program, the distribution of the whole must be on the terms of\n"); |
| my_strcat(inbuf, "this License, whose permissions for other licensees extend to the\n"); |
| my_strcat(inbuf, "entire whole, and thus to each and every part regardless of who wrote it.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "Thus, it is not the intent of this section to claim rights or contest\n"); |
| my_strcat(inbuf, "your rights to work written entirely by you; rather, the intent is to\n"); |
| my_strcat(inbuf, "exercise the right to control the distribution of derivative or\n"); |
| my_strcat(inbuf, "collective works based on the Program.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "In addition, mere aggregation of another work not based on the Program\n"); |
| my_strcat(inbuf, "with the Program (or with a work based on the Program) on a volume of\n"); |
| my_strcat(inbuf, "a storage or distribution medium does not bring the other work under\n"); |
| my_strcat(inbuf, "the scope of this License.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " 3. You may copy and distribute the Program (or a work based on it,\n"); |
| my_strcat(inbuf, "under Section 2) in object code or executable form under the terms of\n"); |
| my_strcat(inbuf, "Sections 1 and 2 above provided that you also do one of the following:\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " a) Accompany it with the complete corresponding machine-readable\n"); |
| my_strcat(inbuf, " source code, which must be distributed under the terms of Sections\n"); |
| my_strcat(inbuf, " 1 and 2 above on a medium customarily used for software interchange; or,\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " b) Accompany it with a written offer, valid for at least three\n"); |
| my_strcat(inbuf, " years, to give any third party, for a charge no more than your\n"); |
| my_strcat(inbuf, " cost of physically performing source distribution, a complete\n"); |
| my_strcat(inbuf, " machine-readable copy of the corresponding source code, to be\n"); |
| my_strcat(inbuf, " distributed under the terms of Sections 1 and 2 above on a medium\n"); |
| my_strcat(inbuf, " customarily used for software interchange; or,\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " c) Accompany it with the information you received as to the offer\n"); |
| my_strcat(inbuf, " to distribute corresponding source code. (This alternative is\n"); |
| my_strcat(inbuf, " allowed only for noncommercial distribution and only if you\n"); |
| my_strcat(inbuf, " received the program in object code or executable form with such\n"); |
| my_strcat(inbuf, " an offer, in accord with Subsection b above.)\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "The source code for a work means the preferred form of the work for\n"); |
| my_strcat(inbuf, "making modifications to it. For an executable work, complete source\n"); |
| my_strcat(inbuf, "code means all the source code for all modules it contains, plus any\n"); |
| my_strcat(inbuf, "associated interface definition files, plus the scripts used to\n"); |
| my_strcat(inbuf, "control compilation and installation of the executable. However, as a\n"); |
| my_strcat(inbuf, "special exception, the source code distributed need not include\n"); |
| my_strcat(inbuf, "anything that is normally distributed (in either source or binary\n"); |
| my_strcat(inbuf, "form) with the major components (compiler, kernel, and so on) of the\n"); |
| my_strcat(inbuf, "operating system on which the executable runs, unless that component\n"); |
| my_strcat(inbuf, "itself accompanies the executable.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "If distribution of executable or object code is made by offering\n"); |
| my_strcat(inbuf, "access to copy from a designated place, then offering equivalent\n"); |
| my_strcat(inbuf, "access to copy the source code from the same place counts as\n"); |
| my_strcat(inbuf, "distribution of the source code, even though third parties are not\n"); |
| my_strcat(inbuf, "compelled to copy the source along with the object code.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " 4. You may not copy, modify, sublicense, or distribute the Program\n"); |
| my_strcat(inbuf, "except as expressly provided under this License. Any attempt\n"); |
| my_strcat(inbuf, "otherwise to copy, modify, sublicense or distribute the Program is\n"); |
| my_strcat(inbuf, "void, and will automatically terminate your rights under this License.\n"); |
| my_strcat(inbuf, "However, parties who have received copies, or rights, from you under\n"); |
| my_strcat(inbuf, "this License will not have their licenses terminated so long as such\n"); |
| my_strcat(inbuf, "parties remain in full compliance.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " 5. You are not required to accept this License, since you have not\n"); |
| my_strcat(inbuf, "signed it. However, nothing else grants you permission to modify or\n"); |
| my_strcat(inbuf, "distribute the Program or its derivative works. These actions are\n"); |
| my_strcat(inbuf, "prohibited by law if you do not accept this License. Therefore, by\n"); |
| my_strcat(inbuf, "modifying or distributing the Program (or any work based on the\n"); |
| my_strcat(inbuf, "Program), you indicate your acceptance of this License to do so, and\n"); |
| my_strcat(inbuf, "all its terms and conditions for copying, distributing or modifying\n"); |
| my_strcat(inbuf, "the Program or works based on it.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " 6. Each time you redistribute the Program (or any work based on the\n"); |
| my_strcat(inbuf, "Program), the recipient automatically receives a license from the\n"); |
| my_strcat(inbuf, "original licensor to copy, distribute or modify the Program subject to\n"); |
| my_strcat(inbuf, "these terms and conditions. You may not impose any further\n"); |
| my_strcat(inbuf, "restrictions on the recipients' exercise of the rights granted herein.\n"); |
| my_strcat(inbuf, "You are not responsible for enforcing compliance by third parties to\n"); |
| my_strcat(inbuf, "this License.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " 7. If, as a consequence of a court judgment or allegation of patent\n"); |
| my_strcat(inbuf, "infringement or for any other reason (not limited to patent issues),\n"); |
| my_strcat(inbuf, "conditions are imposed on you (whether by court order, agreement or\n"); |
| my_strcat(inbuf, "otherwise) that contradict the conditions of this License, they do not\n"); |
| my_strcat(inbuf, "excuse you from the conditions of this License. If you cannot\n"); |
| my_strcat(inbuf, "distribute so as to satisfy simultaneously your obligations under this\n"); |
| my_strcat(inbuf, "License and any other pertinent obligations, then as a consequence you\n"); |
| my_strcat(inbuf, "may not distribute the Program at all. For example, if a patent\n"); |
| my_strcat(inbuf, "license would not permit royalty-free redistribution of the Program by\n"); |
| my_strcat(inbuf, "all those who receive copies directly or indirectly through you, then\n"); |
| my_strcat(inbuf, "the only way you could satisfy both it and this License would be to\n"); |
| my_strcat(inbuf, "refrain entirely from distribution of the Program.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "If any portion of this section is held invalid or unenforceable under\n"); |
| my_strcat(inbuf, "any particular circumstance, the balance of the section is intended to\n"); |
| my_strcat(inbuf, "apply and the section as a whole is intended to apply in other\n"); |
| my_strcat(inbuf, "circumstances.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "It is not the purpose of this section to induce you to infringe any\n"); |
| my_strcat(inbuf, "patents or other property right claims or to contest validity of any\n"); |
| my_strcat(inbuf, "such claims; this section has the sole purpose of protecting the\n"); |
| my_strcat(inbuf, "integrity of the free software distribution system, which is\n"); |
| my_strcat(inbuf, "implemented by public license practices. Many people have made\n"); |
| my_strcat(inbuf, "generous contributions to the wide range of software distributed\n"); |
| my_strcat(inbuf, "through that system in reliance on consistent application of that\n"); |
| my_strcat(inbuf, "system; it is up to the author/donor to decide if he or she is willing\n"); |
| my_strcat(inbuf, "to distribute software through any other system and a licensee cannot\n"); |
| my_strcat(inbuf, "impose that choice.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "This section is intended to make thoroughly clear what is believed to\n"); |
| my_strcat(inbuf, "be a consequence of the rest of this License.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " 8. If the distribution and/or use of the Program is restricted in\n"); |
| my_strcat(inbuf, "certain countries either by patents or by copyrighted interfaces, the\n"); |
| my_strcat(inbuf, "original copyright holder who places the Program under this License\n"); |
| my_strcat(inbuf, "may add an explicit geographical distribution limitation excluding\n"); |
| my_strcat(inbuf, "those countries, so that distribution is permitted only in or among\n"); |
| my_strcat(inbuf, "countries not thus excluded. In such case, this License incorporates\n"); |
| my_strcat(inbuf, "the limitation as if written in the body of this License.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " 9. The Free Software Foundation may publish revised and/or new versions\n"); |
| my_strcat(inbuf, "of the General Public License from time to time. Such new versions will\n"); |
| my_strcat(inbuf, "be similar in spirit to the present version, but may differ in detail to\n"); |
| my_strcat(inbuf, "address new problems or concerns.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "Each version is given a distinguishing version number. If the Program\n"); |
| my_strcat(inbuf, "specifies a version number of this License which applies to it and any\n"); |
| my_strcat(inbuf, "later version, you have the option of following the terms and conditions\n"); |
| my_strcat(inbuf, "either of that version or of any later version published by the Free\n"); |
| my_strcat(inbuf, "Software Foundation. If the Program does not specify a version number of\n"); |
| my_strcat(inbuf, "this License, you may choose any version ever published by the Free Software\n"); |
| my_strcat(inbuf, "Foundation.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " 10. If you wish to incorporate parts of the Program into other free\n"); |
| my_strcat(inbuf, "programs whose distribution conditions are different, write to the author\n"); |
| my_strcat(inbuf, "to ask for permission. For software which is copyrighted by the Free\n"); |
| my_strcat(inbuf, "Software Foundation, write to the Free Software Foundation; we sometimes\n"); |
| my_strcat(inbuf, "make exceptions for this. Our decision will be guided by the two goals\n"); |
| my_strcat(inbuf, "of preserving the free status of all derivatives of our free software and\n"); |
| my_strcat(inbuf, "of promoting the sharing and reuse of software generally.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " NO WARRANTY\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY\n"); |
| my_strcat(inbuf, "FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN\n"); |
| my_strcat(inbuf, "OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES\n"); |
| my_strcat(inbuf, "PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED\n"); |
| my_strcat(inbuf, "OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF\n"); |
| my_strcat(inbuf, "MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS\n"); |
| my_strcat(inbuf, "TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE\n"); |
| my_strcat(inbuf, "PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,\n"); |
| my_strcat(inbuf, "REPAIR OR CORRECTION.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING\n"); |
| my_strcat(inbuf, "WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR\n"); |
| my_strcat(inbuf, "REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,\n"); |
| my_strcat(inbuf, "INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING\n"); |
| my_strcat(inbuf, "OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED\n"); |
| my_strcat(inbuf, "TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY\n"); |
| my_strcat(inbuf, "YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER\n"); |
| my_strcat(inbuf, "PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE\n"); |
| my_strcat(inbuf, "POSSIBILITY OF SUCH DAMAGES.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " END OF TERMS AND CONDITIONS\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " How to Apply These Terms to Your New Programs\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " If you develop a new program, and you want it to be of the greatest\n"); |
| my_strcat(inbuf, "possible use to the public, the best way to achieve this is to make it\n"); |
| my_strcat(inbuf, "free software which everyone can redistribute and change under these terms.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " To do so, attach the following notices to the program. It is safest\n"); |
| my_strcat(inbuf, "to attach them to the start of each source file to most effectively\n"); |
| my_strcat(inbuf, "convey the exclusion of warranty; and each file should have at least\n"); |
| my_strcat(inbuf, "the copyright line and a pointer to where the full notice is found.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " <one line to give the program's name and a brief idea of what it does.>\n"); |
| my_strcat(inbuf, " Copyright (C) <year> <name of author>\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " This program is free software; you can redistribute it and/or modify\n"); |
| my_strcat(inbuf, " it under the terms of the GNU General Public License as published by\n"); |
| my_strcat(inbuf, " the Free Software Foundation; either version 2 of the License, or\n"); |
| my_strcat(inbuf, " (at your option) any later version.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " This program is distributed in the hope that it will be useful,\n"); |
| my_strcat(inbuf, " but WITHOUT ANY WARRANTY; without even the implied warranty of\n"); |
| my_strcat(inbuf, " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"); |
| my_strcat(inbuf, " GNU General Public License for more details.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " You should have received a copy of the GNU General Public License\n"); |
| my_strcat(inbuf, " along with this program; if not, write to the Free Software\n"); |
| my_strcat(inbuf, " Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "Also add information on how to contact you by electronic and paper mail.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "If the program is interactive, make it output a short notice like this\n"); |
| my_strcat(inbuf, "when it starts in an interactive mode:\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " Gnomovision version 69, Copyright (C) year name of author\n"); |
| my_strcat(inbuf, " Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.\n"); |
| my_strcat(inbuf, " This is free software, and you are welcome to redistribute it\n"); |
| my_strcat(inbuf, " under certain conditions; type `show c' for details.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "The hypothetical commands `show w' and `show c' should show the appropriate\n"); |
| my_strcat(inbuf, "parts of the General Public License. Of course, the commands you use may\n"); |
| my_strcat(inbuf, "be called something other than `show w' and `show c'; they could even be\n"); |
| my_strcat(inbuf, "mouse-clicks or menu items--whatever suits your program.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "You should also get your employer (if you work as a programmer) or your\n"); |
| my_strcat(inbuf, "school, if any, to sign a copyright disclaimer for the program, if\n"); |
| my_strcat(inbuf, "necessary. Here is a sample; alter the names:\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " Yoyodyne, Inc., hereby disclaims all copyright interest in the program\n"); |
| my_strcat(inbuf, " `Gnomovision' (which makes passes at compilers) written by James Hacker.\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, " <signature of Ty Coon>, 1 April 1989\n"); |
| my_strcat(inbuf, " Ty Coon, President of Vice\n"); |
| my_strcat(inbuf, "\n"); |
| my_strcat(inbuf, "This General Public License does not permit incorporating your program into\n"); |
| my_strcat(inbuf, "proprietary programs. If your program is a subroutine library, you may\n"); |
| my_strcat(inbuf, "consider it more useful to permit linking proprietary applications with the\n"); |
| my_strcat(inbuf, "library. If this is what you want to do, use the GNU Library General\n"); |
| my_strcat(inbuf, "Public License instead of this License.\n"); |
| |
| my_strcat(inbuf, "\n"); |
| } |
| |
| #include <stdio.h> |
| #include <malloc.h> |
| #include <assert.h> |
| |
| /* For providing services. */ |
| static HWord g_serviceFn ( HWord arg1, HWord arg2 ) |
| { |
| switch (arg1) { |
| case 0: /* EXIT */ |
| exit(0); |
| case 1: /* PUTC */ |
| putchar(arg2); |
| return 0; |
| case 2: /* MALLOC */ |
| return (HWord)malloc(arg2); |
| case 3: /* FREE */ |
| free((void*)arg2); |
| return 0; |
| default: |
| assert(0); |
| } |
| } |
| |
| static char *bzerrorstrings[] = { |
| "OK" |
| ,"SEQUENCE_ERROR" |
| ,"PARAM_ERROR" |
| ,"MEM_ERROR" |
| ,"DATA_ERROR" |
| ,"DATA_ERROR_MAGIC" |
| ,"IO_ERROR" |
| ,"UNEXPECTED_EOF" |
| ,"OUTBUFF_FULL" |
| ,"CONFIG_ERROR" |
| ,"???" /* for future */ |
| ,"???" /* for future */ |
| ,"???" /* for future */ |
| ,"???" /* for future */ |
| ,"???" /* for future */ |
| ,"???" /* for future */ |
| }; |
| |
| // If given a cmd line arg, behave as a correctness regtest |
| // (run fast and be verbose). If not, run for a long time |
| // which is what is needed for the performance suite. |
| int main ( int argc, char** argv ) |
| { |
| int r; |
| int bit; |
| int i; |
| |
| int regtest; |
| assert(argc == 1 || argc == 2); |
| regtest = argc==2; |
| |
| serviceFn = g_serviceFn; |
| |
| set_inbuf(); |
| nIn = vex_strlen(inbuf)+1; |
| vex_printf( "%d bytes read\n", nIn ); |
| |
| nZ = M_BLOCK; |
| r = BZ2_bzBuffToBuffCompress ( |
| zbuf, &nZ, inbuf, nIn, 9, 3/*verb*/, 30 ); |
| |
| if (r != BZ_OK) { |
| vex_printf("initial compress failed!\n"); |
| (*serviceFn)(0,0); |
| } |
| vex_printf( "%d after compression\n", nZ ); |
| |
| for (bit = 0; bit < nZ*8; bit += (bit < 35 ? 1 : (regtest?2377:137))) { |
| if (regtest) |
| vex_printf( "bit %d ", bit ); |
| flip_bit ( bit ); |
| nOut = M_BLOCK_OUT; |
| r = BZ2_bzBuffToBuffDecompress ( |
| outbuf, &nOut, zbuf, nZ, 1/*small*/, 0 ); |
| if (regtest) |
| vex_printf( " %d %s ", r, bzerrorstrings[-r] ); |
| |
| if (r != BZ_OK) { |
| if (regtest) |
| vex_printf( "\n" ); |
| } else { |
| if (nOut != nIn) { |
| vex_printf( "nIn/nOut mismatch %d %d\n", nIn, nOut ); |
| (*serviceFn)(0,0); |
| } else { |
| for (i = 0; i < nOut; i++) |
| if (inbuf[i] != outbuf[i]) { |
| vex_printf( "mismatch at %d\n", i ); |
| (*serviceFn)(0,0); |
| } |
| if (i == nOut) vex_printf( "really ok!\n" ); |
| } |
| } |
| |
| flip_bit ( bit ); |
| } |
| |
| #if 0 |
| assert (nOut == nIn); |
| for (i = 0; i < nOut; i++) { |
| if (inbuf[i] != outbuf[i]) { |
| vex_printf( "difference at %d !\n", i ); |
| return 1; |
| } |
| } |
| #endif |
| |
| vex_printf( "all ok\n" ); |
| (*serviceFn)(0,0); |
| /*NOTREACHED*/ |
| return 0; |
| } |