| /* |
| ** Copyright 2007, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| |
| package com.android.internal.telephony; |
| |
| import android.app.PendingIntent; |
| import android.net.Uri; |
| import com.android.internal.telephony.SmsRawData; |
| |
| /** Interface for applications to access the ICC phone book. |
| * |
| * <p>The following code snippet demonstrates a static method to |
| * retrieve the ISms interface from Android:</p> |
| * <pre>private static ISms getSmsInterface() |
| throws DeadObjectException { |
| IServiceManager sm = ServiceManagerNative.getDefault(); |
| ISms ss; |
| ss = ISms.Stub.asInterface(sm.getService("isms")); |
| return ss; |
| } |
| * </pre> |
| */ |
| |
| interface ISms { |
| /** |
| * Retrieves all messages currently stored on ICC. |
| * |
| * @return list of SmsRawData of all sms on ICC |
| */ |
| List<SmsRawData> getAllMessagesFromIccEf(String callingPkg); |
| |
| /** |
| * Retrieves all messages currently stored on ICC. |
| * @param subId the subId id. |
| * @return list of SmsRawData of all sms on ICC |
| */ |
| List<SmsRawData> getAllMessagesFromIccEfForSubscriber(in long subId, String callingPkg); |
| |
| /** |
| * Update the specified message on the ICC. |
| * |
| * @param messageIndex record index of message to update |
| * @param newStatus new message status (STATUS_ON_ICC_READ, |
| * STATUS_ON_ICC_UNREAD, STATUS_ON_ICC_SENT, |
| * STATUS_ON_ICC_UNSENT, STATUS_ON_ICC_FREE) |
| * @param pdu the raw PDU to store |
| * @return success or not |
| * |
| */ |
| boolean updateMessageOnIccEf(String callingPkg, int messageIndex, int newStatus, |
| in byte[] pdu); |
| |
| /** |
| * Update the specified message on the ICC. |
| * |
| * @param messageIndex record index of message to update |
| * @param newStatus new message status (STATUS_ON_ICC_READ, |
| * STATUS_ON_ICC_UNREAD, STATUS_ON_ICC_SENT, |
| * STATUS_ON_ICC_UNSENT, STATUS_ON_ICC_FREE) |
| * @param pdu the raw PDU to store |
| * @param subId the subId id. |
| * @return success or not |
| * |
| */ |
| boolean updateMessageOnIccEfForSubscriber(in long subId, String callingPkg, |
| int messageIndex, int newStatus, in byte[] pdu); |
| |
| /** |
| * Copy a raw SMS PDU to the ICC. |
| * |
| * @param pdu the raw PDU to store |
| * @param status message status (STATUS_ON_ICC_READ, STATUS_ON_ICC_UNREAD, |
| * STATUS_ON_ICC_SENT, STATUS_ON_ICC_UNSENT) |
| * @return success or not |
| * |
| */ |
| boolean copyMessageToIccEf(String callingPkg, int status, in byte[] pdu, in byte[] smsc); |
| |
| /** |
| * Copy a raw SMS PDU to the ICC. |
| * |
| * @param pdu the raw PDU to store |
| * @param status message status (STATUS_ON_ICC_READ, STATUS_ON_ICC_UNREAD, |
| * STATUS_ON_ICC_SENT, STATUS_ON_ICC_UNSENT) |
| * @param subId the subId id. |
| * @return success or not |
| * |
| */ |
| boolean copyMessageToIccEfForSubscriber(in long subId, String callingPkg, int status, |
| in byte[] pdu, in byte[] smsc); |
| |
| /** |
| * Send a data SMS. |
| * |
| * @param smsc the SMSC to send the message through, or NULL for the |
| * default SMSC |
| * @param data the body of the message to send |
| * @param sentIntent if not NULL this <code>PendingIntent</code> is |
| * broadcast when the message is sucessfully sent, or failed. |
| * The result code will be <code>Activity.RESULT_OK<code> for success, |
| * or one of these errors:<br> |
| * <code>RESULT_ERROR_GENERIC_FAILURE</code><br> |
| * <code>RESULT_ERROR_RADIO_OFF</code><br> |
| * <code>RESULT_ERROR_NULL_PDU</code><br> |
| * For <code>RESULT_ERROR_GENERIC_FAILURE</code> the sentIntent may include |
| * the extra "errorCode" containing a radio technology specific value, |
| * generally only useful for troubleshooting.<br> |
| * The per-application based SMS control checks sentIntent. If sentIntent |
| * is NULL the caller will be checked against all unknown applicaitons, |
| * which cause smaller number of SMS to be sent in checking period. |
| * @param deliveryIntent if not NULL this <code>PendingIntent</code> is |
| * broadcast when the message is delivered to the recipient. The |
| * raw pdu of the status report is in the extended data ("pdu"). |
| */ |
| void sendData(String callingPkg, in String destAddr, in String scAddr, in int destPort, |
| in byte[] data, in PendingIntent sentIntent, in PendingIntent deliveryIntent); |
| |
| /** |
| * Send a data SMS. |
| * |
| * @param smsc the SMSC to send the message through, or NULL for the |
| * default SMSC |
| * @param data the body of the message to send |
| * @param sentIntent if not NULL this <code>PendingIntent</code> is |
| * broadcast when the message is sucessfully sent, or failed. |
| * The result code will be <code>Activity.RESULT_OK<code> for success, |
| * or one of these errors:<br> |
| * <code>RESULT_ERROR_GENERIC_FAILURE</code><br> |
| * <code>RESULT_ERROR_RADIO_OFF</code><br> |
| * <code>RESULT_ERROR_NULL_PDU</code><br> |
| * For <code>RESULT_ERROR_GENERIC_FAILURE</code> the sentIntent may include |
| * the extra "errorCode" containing a radio technology specific value, |
| * generally only useful for troubleshooting.<br> |
| * The per-application based SMS control checks sentIntent. If sentIntent |
| * is NULL the caller will be checked against all unknown applicaitons, |
| * which cause smaller number of SMS to be sent in checking period. |
| * @param deliveryIntent if not NULL this <code>PendingIntent</code> is |
| * broadcast when the message is delivered to the recipient. The |
| * raw pdu of the status report is in the extended data ("pdu"). |
| * @param subId the subId id. |
| */ |
| void sendDataForSubscriber(long subId, String callingPkg, in String destAddr, |
| in String scAddr, in int destPort, in byte[] data, in PendingIntent sentIntent, |
| in PendingIntent deliveryIntent); |
| |
| /** |
| * Send an SMS. |
| * |
| * @param smsc the SMSC to send the message through, or NULL for the |
| * default SMSC |
| * @param text the body of the message to send |
| * @param sentIntent if not NULL this <code>PendingIntent</code> is |
| * broadcast when the message is sucessfully sent, or failed. |
| * The result code will be <code>Activity.RESULT_OK<code> for success, |
| * or one of these errors:<br> |
| * <code>RESULT_ERROR_GENERIC_FAILURE</code><br> |
| * <code>RESULT_ERROR_RADIO_OFF</code><br> |
| * <code>RESULT_ERROR_NULL_PDU</code><br> |
| * For <code>RESULT_ERROR_GENERIC_FAILURE</code> the sentIntent may include |
| * the extra "errorCode" containing a radio technology specific value, |
| * generally only useful for troubleshooting.<br> |
| * The per-application based SMS control checks sentIntent. If sentIntent |
| * is NULL the caller will be checked against all unknown applications, |
| * which cause smaller number of SMS to be sent in checking period. |
| * @param deliveryIntent if not NULL this <code>PendingIntent</code> is |
| * broadcast when the message is delivered to the recipient. The |
| * raw pdu of the status report is in the extended data ("pdu"). |
| */ |
| void sendText(String callingPkg, in String destAddr, in String scAddr, in String text, |
| in PendingIntent sentIntent, in PendingIntent deliveryIntent); |
| |
| /** |
| * Send an SMS. |
| * |
| * @param smsc the SMSC to send the message through, or NULL for the |
| * default SMSC |
| * @param text the body of the message to send |
| * @param sentIntent if not NULL this <code>PendingIntent</code> is |
| * broadcast when the message is sucessfully sent, or failed. |
| * The result code will be <code>Activity.RESULT_OK<code> for success, |
| * or one of these errors:<br> |
| * <code>RESULT_ERROR_GENERIC_FAILURE</code><br> |
| * <code>RESULT_ERROR_RADIO_OFF</code><br> |
| * <code>RESULT_ERROR_NULL_PDU</code><br> |
| * For <code>RESULT_ERROR_GENERIC_FAILURE</code> the sentIntent may include |
| * the extra "errorCode" containing a radio technology specific value, |
| * generally only useful for troubleshooting.<br> |
| * The per-application based SMS control checks sentIntent. If sentIntent |
| * is NULL the caller will be checked against all unknown applications, |
| * which cause smaller number of SMS to be sent in checking period. |
| * @param deliveryIntent if not NULL this <code>PendingIntent</code> is |
| * broadcast when the message is delivered to the recipient. The |
| * raw pdu of the status report is in the extended data ("pdu"). |
| * @param subId the subId on which the SMS has to be sent. |
| */ |
| void sendTextForSubscriber(in long subId, String callingPkg, in String destAddr, |
| in String scAddr, in String text, in PendingIntent sentIntent, |
| in PendingIntent deliveryIntent); |
| |
| /** |
| * Inject an SMS PDU into the android platform. |
| * |
| * @param pdu is the byte array of pdu to be injected into android application framework |
| * @param format is the format of SMS pdu (android.telephony.SmsMessage.FORMAT_3GPP or |
| * android.telephony.SmsMessage.FORMAT_3GPP2) |
| * @param receivedIntent if not NULL this <code>PendingIntent</code> is |
| * broadcast when the message is successfully received by the |
| * android application framework. This intent is broadcasted at |
| * the same time an SMS received from radio is acknowledged back. |
| */ |
| void injectSmsPdu(in byte[] pdu, String format, in PendingIntent receivedIntent); |
| |
| /** |
| * Update the status of a pending (send-by-IP) SMS message and resend by PSTN if necessary. |
| * This outbound message was handled by the carrier app. If the carrier app fails to send |
| * this message, it would be resent by PSTN. |
| * |
| * @param messageRef the reference number of the SMS message. |
| * @param success True if and only if the message was sent successfully. If its value is |
| * false, this message should be resent via PSTN. |
| */ |
| void updateSmsSendStatus(int messageRef, boolean success); |
| |
| /** |
| * Send a multi-part text based SMS. |
| * |
| * @param destinationAddress the address to send the message to |
| * @param scAddress is the service center address or null to use |
| * the current default SMSC |
| * @param parts an <code>ArrayList</code> of strings that, in order, |
| * comprise the original message |
| * @param sentIntents if not null, an <code>ArrayList</code> of |
| * <code>PendingIntent</code>s (one for each message part) that is |
| * broadcast when the corresponding message part has been sent. |
| * The result code will be <code>Activity.RESULT_OK<code> for success, |
| * or one of these errors: |
| * <code>RESULT_ERROR_GENERIC_FAILURE</code> |
| * <code>RESULT_ERROR_RADIO_OFF</code> |
| * <code>RESULT_ERROR_NULL_PDU</code>. |
| * @param deliveryIntents if not null, an <code>ArrayList</code> of |
| * <code>PendingIntent</code>s (one for each message part) that is |
| * broadcast when the corresponding message part has been delivered |
| * to the recipient. The raw pdu of the status report is in the |
| * extended data ("pdu"). |
| */ |
| void sendMultipartText(String callingPkg, in String destinationAddress, in String scAddress, |
| in List<String> parts, in List<PendingIntent> sentIntents, |
| in List<PendingIntent> deliveryIntents); |
| |
| /** |
| * Send a multi-part text based SMS. |
| * |
| * @param destinationAddress the address to send the message to |
| * @param scAddress is the service center address or null to use |
| * the current default SMSC |
| * @param parts an <code>ArrayList</code> of strings that, in order, |
| * comprise the original message |
| * @param sentIntents if not null, an <code>ArrayList</code> of |
| * <code>PendingIntent</code>s (one for each message part) that is |
| * broadcast when the corresponding message part has been sent. |
| * The result code will be <code>Activity.RESULT_OK<code> for success, |
| * or one of these errors: |
| * <code>RESULT_ERROR_GENERIC_FAILURE</code> |
| * <code>RESULT_ERROR_RADIO_OFF</code> |
| * <code>RESULT_ERROR_NULL_PDU</code>. |
| * @param deliveryIntents if not null, an <code>ArrayList</code> of |
| * <code>PendingIntent</code>s (one for each message part) that is |
| * broadcast when the corresponding message part has been delivered |
| * to the recipient. The raw pdu of the status report is in the |
| * extended data ("pdu"). |
| * @param subId the subId on which the SMS has to be sent. |
| */ |
| void sendMultipartTextForSubscriber(in long subId, String callingPkg, |
| in String destinationAddress, in String scAddress, |
| in List<String> parts, in List<PendingIntent> sentIntents, |
| in List<PendingIntent> deliveryIntents); |
| |
| /** |
| * Enable reception of cell broadcast (SMS-CB) messages with the given |
| * message identifier. Note that if two different clients enable the same |
| * message identifier, they must both disable it for the device to stop |
| * receiving those messages. |
| * |
| * @param messageIdentifier Message identifier as specified in TS 23.041 (3GPP) or |
| * C.R1001-G (3GPP2) |
| * @return true if successful, false otherwise |
| * |
| * @see #disableCellBroadcast(int) |
| */ |
| boolean enableCellBroadcast(int messageIdentifier); |
| |
| /** |
| * Enable reception of cell broadcast (SMS-CB) messages with the given |
| * message identifier. Note that if two different clients enable the same |
| * message identifier, they must both disable it for the device to stop |
| * receiving those messages. |
| * |
| * @param messageIdentifier Message identifier as specified in TS 23.041 (3GPP) or |
| * C.R1001-G (3GPP2) |
| * @param subId for which the broadcast has to be enabled |
| * @return true if successful, false otherwise |
| * |
| * @see #disableCellBroadcast(int) |
| */ |
| boolean enableCellBroadcastForSubscriber(in long subId, int messageIdentifier); |
| |
| /** |
| * Disable reception of cell broadcast (SMS-CB) messages with the given |
| * message identifier. Note that if two different clients enable the same |
| * message identifier, they must both disable it for the device to stop |
| * receiving those messages. |
| * |
| * @param messageIdentifier Message identifier as specified in TS 23.041 (3GPP) or |
| * C.R1001-G (3GPP2) |
| * @return true if successful, false otherwise |
| * |
| * @see #enableCellBroadcast(int) |
| */ |
| boolean disableCellBroadcast(int messageIdentifier); |
| |
| /** |
| * Disable reception of cell broadcast (SMS-CB) messages with the given |
| * message identifier. Note that if two different clients enable the same |
| * message identifier, they must both disable it for the device to stop |
| * receiving those messages. |
| * |
| * @param messageIdentifier Message identifier as specified in TS 23.041 (3GPP) or |
| * C.R1001-G (3GPP2) |
| * @param subId for which the broadcast has to be disabled |
| * @return true if successful, false otherwise |
| * |
| * @see #enableCellBroadcast(int) |
| */ |
| boolean disableCellBroadcastForSubscriber(in long subId, int messageIdentifier); |
| |
| /* |
| * Enable reception of cell broadcast (SMS-CB) messages with the given |
| * message identifier range. Note that if two different clients enable |
| * a message identifier range, they must both disable it for the device |
| * to stop receiving those messages. |
| * |
| * @param startMessageId first message identifier as specified in TS 23.041 (3GPP) or |
| * C.R1001-G (3GPP2) |
| * @param endMessageId last message identifier as specified in TS 23.041 (3GPP) or |
| * C.R1001-G (3GPP2) |
| * @return true if successful, false otherwise |
| * |
| * @see #disableCellBroadcastRange(int, int) |
| */ |
| boolean enableCellBroadcastRange(int startMessageId, int endMessageId); |
| |
| /* |
| * Enable reception of cell broadcast (SMS-CB) messages with the given |
| * message identifier range. Note that if two different clients enable |
| * a message identifier range, they must both disable it for the device |
| * to stop receiving those messages. |
| * |
| * @param startMessageId first message identifier as specified in TS 23.041 (3GPP) or |
| * C.R1001-G (3GPP2) |
| * @param endMessageId last message identifier as specified in TS 23.041 (3GPP) or |
| * C.R1001-G (3GPP2) |
| * @param subId for which the broadcast has to be enabled |
| * @return true if successful, false otherwise |
| * |
| * @see #disableCellBroadcastRange(int, int) |
| */ |
| boolean enableCellBroadcastRangeForSubscriber(long subId, int startMessageId, int endMessageId); |
| |
| /** |
| * Disable reception of cell broadcast (SMS-CB) messages with the given |
| * message identifier range. Note that if two different clients enable |
| * a message identifier range, they must both disable it for the device |
| * to stop receiving those messages. |
| * |
| * @param startMessageId first message identifier as specified in TS 23.041 (3GPP) or |
| * C.R1001-G (3GPP2) |
| * @param endMessageId last message identifier as specified in TS 23.041 (3GPP) or |
| * C.R1001-G (3GPP2) |
| * @return true if successful, false otherwise |
| * |
| * @see #enableCellBroadcastRange(int, int) |
| */ |
| boolean disableCellBroadcastRange(int startMessageId, int endMessageId); |
| |
| /** |
| * Disable reception of cell broadcast (SMS-CB) messages with the given |
| * message identifier range. Note that if two different clients enable |
| * a message identifier range, they must both disable it for the device |
| * to stop receiving those messages. |
| * |
| * @param startMessageId first message identifier as specified in TS 23.041 (3GPP) or |
| * C.R1001-G (3GPP2) |
| * @param endMessageId last message identifier as specified in TS 23.041 (3GPP) or |
| * C.R1001-G (3GPP2) |
| * @param subId for which the broadcast has to be disabled |
| * @return true if successful, false otherwise |
| * |
| * @see #enableCellBroadcastRange(int, int, int) |
| */ |
| boolean disableCellBroadcastRangeForSubscriber(long subId, int startMessageId, |
| int endMessageId); |
| |
| /** |
| * Returns the premium SMS send permission for the specified package. |
| * Requires system permission. |
| */ |
| int getPremiumSmsPermission(String packageName); |
| |
| /** |
| * Returns the premium SMS send permission for the specified package. |
| * Requires system permission. |
| */ |
| int getPremiumSmsPermissionForSubscriber(long subId, String packageName); |
| |
| /** |
| * Set the SMS send permission for the specified package. |
| * Requires system permission. |
| */ |
| void setPremiumSmsPermission(String packageName, int permission); |
| |
| /** |
| * Set the SMS send permission for the specified package. |
| * Requires system permission. |
| */ |
| /** |
| * Set the SMS send permission for the specified package. |
| * Requires system permission. |
| */ |
| void setPremiumSmsPermissionForSubscriber(long subId, String packageName, int permission); |
| |
| /** |
| * SMS over IMS is supported if IMS is registered and SMS is supported |
| * on IMS. |
| * |
| * @return true if SMS over IMS is supported, false otherwise |
| * |
| * @see #getImsSmsFormat() |
| */ |
| boolean isImsSmsSupported(); |
| |
| /** |
| * SMS over IMS is supported if IMS is registered and SMS is supported |
| * on IMS. |
| * @param subId for subId which isImsSmsSupported is queried |
| * @return true if SMS over IMS is supported, false otherwise |
| * |
| * @see #getImsSmsFormat() |
| */ |
| boolean isImsSmsSupportedForSubscriber(long subId); |
| |
| /* |
| * get user prefered SMS subId |
| * @return subId id |
| */ |
| long getPreferredSmsSubscription(); |
| |
| /** |
| * Gets SMS format supported on IMS. SMS over IMS format is |
| * either 3GPP or 3GPP2. |
| * |
| * @return android.telephony.SmsMessage.FORMAT_3GPP, |
| * android.telephony.SmsMessage.FORMAT_3GPP2 |
| * or android.telephony.SmsMessage.FORMAT_UNKNOWN |
| * |
| * @see #isImsSmsSupported() |
| */ |
| String getImsSmsFormat(); |
| |
| /** |
| * Gets SMS format supported on IMS. SMS over IMS format is |
| * either 3GPP or 3GPP2. |
| * @param subId for subId which getImsSmsFormat is queried |
| * @return android.telephony.SmsMessage.FORMAT_3GPP, |
| * android.telephony.SmsMessage.FORMAT_3GPP2 |
| * or android.telephony.SmsMessage.FORMAT_UNKNOWN |
| * |
| * @see #isImsSmsSupported() |
| */ |
| String getImsSmsFormatForSubscriber(long subId); |
| |
| /* |
| * Get SMS prompt property, enabled or not |
| * @return true if enabled, false otherwise |
| */ |
| boolean isSMSPromptEnabled(); |
| |
| /** |
| * Send a system stored text message. |
| * |
| * This is used for sending a previously sent, but failed-to-send, message or |
| * for sending a text message that has been stored as a draft. |
| * |
| * @param subId the SIM id. |
| * @param callingPkg the package name of the calling app |
| * @param messageUri the URI of the stored message |
| * @param scAddress is the service center address or null to use the current default SMSC |
| * @param sentIntent if not NULL this <code>PendingIntent</code> is |
| * broadcast when the message is successfully sent, or failed. |
| * The result code will be <code>Activity.RESULT_OK</code> for success, |
| * or one of these errors:<br> |
| * <code>RESULT_ERROR_GENERIC_FAILURE</code><br> |
| * <code>RESULT_ERROR_RADIO_OFF</code><br> |
| * <code>RESULT_ERROR_NULL_PDU</code><br> |
| * For <code>RESULT_ERROR_GENERIC_FAILURE</code> the sentIntent may include |
| * the extra "errorCode" containing a radio technology specific value, |
| * generally only useful for troubleshooting.<br> |
| * The per-application based SMS control checks sentIntent. If sentIntent |
| * is NULL the caller will be checked against all unknown applications, |
| * which cause smaller number of SMS to be sent in checking period. |
| * @param deliveryIntent if not NULL this <code>PendingIntent</code> is |
| * broadcast when the message is delivered to the recipient. The |
| * raw pdu of the status report is in the extended data ("pdu"). |
| */ |
| void sendStoredText(long subId, String callingPkg, in Uri messageUri, String scAddress, |
| in PendingIntent sentIntent, in PendingIntent deliveryIntent); |
| |
| /** |
| * Send a system stored multi-part text message. |
| * |
| * This is used for sending a previously sent, but failed-to-send, message or |
| * for sending a text message that has been stored as a draft. |
| * The provided <code>PendingIntent</code> lists should match the part number of the |
| * divided text of the stored message by using <code>divideMessage</code> |
| * |
| * @param subId the SIM id. |
| * @param callingPkg the package name of the calling app |
| * @param messageUri the URI of the stored message |
| * @param scAddress is the service center address or null to use |
| * the current default SMSC |
| * @param sentIntents if not null, an <code>ArrayList</code> of |
| * <code>PendingIntent</code>s (one for each message part) that is |
| * broadcast when the corresponding message part has been sent. |
| * The result code will be <code>Activity.RESULT_OK</code> for success, |
| * or one of these errors:<br> |
| * <code>RESULT_ERROR_GENERIC_FAILURE</code><br> |
| * <code>RESULT_ERROR_RADIO_OFF</code><br> |
| * <code>RESULT_ERROR_NULL_PDU</code><br> |
| * For <code>RESULT_ERROR_GENERIC_FAILURE</code> each sentIntent may include |
| * the extra "errorCode" containing a radio technology specific value, |
| * generally only useful for troubleshooting.<br> |
| * The per-application based SMS control checks sentIntent. If sentIntent |
| * is NULL the caller will be checked against all unknown applications, |
| * which cause smaller number of SMS to be sent in checking period. |
| * @param deliveryIntents if not null, an <code>ArrayList</code> of |
| * <code>PendingIntent</code>s (one for each message part) that is |
| * broadcast when the corresponding message part has been delivered |
| * to the recipient. The raw pdu of the status report is in the |
| * extended data ("pdu"). |
| */ |
| void sendStoredMultipartText(long subId, String callingPkg, in Uri messageUri, |
| String scAddress, in List<PendingIntent> sentIntents, |
| in List<PendingIntent> deliveryIntents); |
| } |