libs/hwui/FrameBuilder.h - platform/frameworks/base - Gitiles

 /*
  * Copyright (C) 2016 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #pragma once

 #include "BakedOpState.h"
 #include "CanvasState.h"
 #include "DisplayList.h"
 #include "LayerBuilder.h"
 #include "RecordedOp.h"
 #include "utils/GLUtils.h"

 #include <vector>
 #include <unordered_map>

 struct SkRect;

 namespace android {
 namespace uirenderer {

 class BakedOpState;
 class LayerUpdateQueue;
 class OffscreenBuffer;
 class Rect;

 /**
  * Traverses all of the drawing commands from the layers and RenderNodes passed into it, preparing
  * them to be rendered.
  *
  * Resolves final drawing state for each operation (including clip, alpha and matrix), and then
  * reorder and merge each op as it is resolved for drawing efficiency. Each layer of content (either
  * from the LayerUpdateQueue, or temporary layers created by saveLayer operations in the
  * draw stream) will create different reorder contexts, each in its own LayerBuilder.
  *
  * Then the prepared or 'baked' drawing commands can be issued by calling the templated
  * replayBakedOps() function, which will dispatch them (including any created merged op collections)
  * to a Dispatcher and Renderer. See BakedOpDispatcher for how these baked drawing operations are
  * resolved into Glops and rendered via BakedOpRenderer.
  *
  * This class is also the authoritative source for traversing RenderNodes, both for standard op
  * traversal within a DisplayList, and for out of order RenderNode traversal for Z and projection.
  */
 class FrameBuilder : public CanvasStateClient {
 public:
     struct LightGeometry {
         Vector3 center;
         float radius;
     };

     // TODO: remove
     FrameBuilder(const LayerUpdateQueue& layers, const SkRect& clip,
             uint32_t viewportWidth, uint32_t viewportHeight,
             const std::vector< sp<RenderNode> >& nodes,
             const LightGeometry& lightGeometry,
             Caches& caches)
             : FrameBuilder(layers, clip, viewportWidth, viewportHeight,
                     nodes, lightGeometry, Rect(), caches) {}

     FrameBuilder(const LayerUpdateQueue& layers, const SkRect& clip,
             uint32_t viewportWidth, uint32_t viewportHeight,
             const std::vector< sp<RenderNode> >& nodes,
             const LightGeometry& lightGeometry,
             const Rect &contentDrawBounds,
             Caches& caches);

     virtual ~FrameBuilder() {}

     /**
      * replayBakedOps() is templated based on what class will receive ops being replayed.
      *
      * It constructs a lookup array of lambdas, which allows a recorded BakeOpState to use
      * state->op->opId to lookup a receiver that will be called when the op is replayed.
      */
     template <typename StaticDispatcher, typename Renderer>
     void replayBakedOps(Renderer& renderer) {
         finishDefer();
         /**
          * Defines a LUT of lambdas which allow a recorded BakedOpState to use state->op->opId to
          * dispatch the op via a method on a static dispatcher when the op is replayed.
          *
          * For example a BitmapOp would resolve, via the lambda lookup, to calling:
          *
          * StaticDispatcher::onBitmapOp(Renderer& renderer, const BitmapOp& op, const BakedOpState& state);
          */
         #define X(Type) \
                 [](void* renderer, const BakedOpState& state) { \
                     StaticDispatcher::on##Type(*(static_cast<Renderer*>(renderer)), \
                             static_cast<const Type&>(*(state.op)), state); \
                 },
         static BakedOpReceiver unmergedReceivers[] = BUILD_RENDERABLE_OP_LUT(X);
         #undef X

         /**
          * Defines a LUT of lambdas which allow merged arrays of BakedOpState* to be passed to a
          * static dispatcher when the group of merged ops is replayed.
          */
         #define X(Type) \
                 [](void* renderer, const MergedBakedOpList& opList) { \
                     StaticDispatcher::onMerged##Type##s(*(static_cast<Renderer*>(renderer)), opList); \
                 },
         static MergedOpReceiver mergedReceivers[] = BUILD_MERGEABLE_OP_LUT(X);
         #undef X

         // Relay through layers in reverse order, since layers
         // later in the list will be drawn by earlier ones
         for (int i = mLayerBuilders.size() - 1; i >= 1; i--) {
             GL_CHECKPOINT(MODERATE);
             LayerBuilder& layer = *(mLayerBuilders[i]);
             if (layer.renderNode) {
                 // cached HW layer - can't skip layer if empty
                 renderer.startRepaintLayer(layer.offscreenBuffer, layer.repaintRect);
                 GL_CHECKPOINT(MODERATE);
                 layer.replayBakedOpsImpl((void*)&renderer, unmergedReceivers, mergedReceivers);
                 GL_CHECKPOINT(MODERATE);
                 renderer.endLayer();
             } else if (!layer.empty()) {
                 // save layer - skip entire layer if empty (in which case, LayerOp has null layer).
                 layer.offscreenBuffer = renderer.startTemporaryLayer(layer.width, layer.height);
                 GL_CHECKPOINT(MODERATE);
                 layer.replayBakedOpsImpl((void*)&renderer, unmergedReceivers, mergedReceivers);
                 GL_CHECKPOINT(MODERATE);
                 renderer.endLayer();
             }
         }

         GL_CHECKPOINT(MODERATE);
         const LayerBuilder& fbo0 = *(mLayerBuilders[0]);
         renderer.startFrame(fbo0.width, fbo0.height, fbo0.repaintRect);
         GL_CHECKPOINT(MODERATE);
         fbo0.replayBakedOpsImpl((void*)&renderer, unmergedReceivers, mergedReceivers);
         GL_CHECKPOINT(MODERATE);
         renderer.endFrame(fbo0.repaintRect);
     }

     void dump() const {
         for (auto&& layer : mLayerBuilders) {
             layer->dump();
         }
     }

     ///////////////////////////////////////////////////////////////////
     /// CanvasStateClient interface
     ///////////////////////////////////////////////////////////////////
     virtual void onViewportInitialized() override;
     virtual void onSnapshotRestored(const Snapshot& removed, const Snapshot& restored) override;
     virtual GLuint getTargetFbo() const override { return 0; }

 private:
     void finishDefer();
     enum class ChildrenSelectMode {
         Negative,
         Positive
     };
     void saveForLayer(uint32_t layerWidth, uint32_t layerHeight,
             float contentTranslateX, float contentTranslateY,
             const Rect& repaintRect,
             const Vector3& lightCenter,
             const BeginLayerOp* beginLayerOp, RenderNode* renderNode);
     void restoreForLayer();

     LayerBuilder& currentLayer() { return *(mLayerBuilders[mLayerStack.back()]); }

     BakedOpState* tryBakeOpState(const RecordedOp& recordedOp) {
         return BakedOpState::tryConstruct(mAllocator, *mCanvasState.writableSnapshot(), recordedOp);
     }
     BakedOpState* tryBakeUnboundedOpState(const RecordedOp& recordedOp) {
         return BakedOpState::tryConstructUnbounded(mAllocator, *mCanvasState.writableSnapshot(), recordedOp);
     }


     // should always be surrounded by a save/restore pair, and not called if DisplayList is null
     void deferNodePropsAndOps(RenderNode& node);

     template <typename V>
     void defer3dChildren(ChildrenSelectMode mode, const V& zTranslatedNodes);

     void deferShadow(const RenderNodeOp& casterOp);

     void deferProjectedChildren(const RenderNode& renderNode);

     void deferNodeOps(const RenderNode& renderNode);

     void deferRenderNodeOpImpl(const RenderNodeOp& op);

     void replayBakedOpsImpl(void* arg, BakedOpReceiver* receivers);

     SkPath* createFrameAllocatedPath() {
         return mAllocator.create<SkPath>();
     }

     const BakedOpState* deferStrokeableOp(const RecordedOp& op, batchid_t batchId,
             BakedOpState::StrokeBehavior strokeBehavior = BakedOpState::StrokeBehavior::StyleDefined);

     /**
      * Declares all FrameBuilder::deferXXXXOp() methods for every RecordedOp type.
      *
      * These private methods are called from within deferImpl to defer each individual op
      * type differently.
      */
 #define X(Type) void defer##Type(const Type& op);
     MAP_DEFERRABLE_OPS(X)
 #undef X

     // List of every deferred layer's render state. Replayed in reverse order to render a frame.
     std::vector<LayerBuilder*> mLayerBuilders;

     /*
      * Stack of indices within mLayerBuilders representing currently active layers. If drawing
      * layerA within a layerB, will contain, in order:
      *  - 0 (representing FBO 0, always present)
      *  - layerB's index
      *  - layerA's index
      *
      * Note that this doesn't vector doesn't always map onto all values of mLayerBuilders. When a
      * layer is finished deferring, it will still be represented in mLayerBuilders, but it's index
      * won't be in mLayerStack. This is because it can be replayed, but can't have any more drawing
      * ops added to it.
     */
     std::vector<size_t> mLayerStack;

     CanvasState mCanvasState;

     Caches& mCaches;

     float mLightRadius;

     // contains single-frame objects, such as BakedOpStates, LayerBuilders, Batches
     LinearAllocator mAllocator;
 };

 }; // namespace uirenderer
 }; // namespace android
	/*
	* Copyright (C) 2016 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#pragma once

	#include "BakedOpState.h"
	#include "CanvasState.h"
	#include "DisplayList.h"
	#include "LayerBuilder.h"
	#include "RecordedOp.h"
	#include "utils/GLUtils.h"

	#include <vector>
	#include <unordered_map>

	struct SkRect;

	namespace android {
	namespace uirenderer {

	class BakedOpState;
	class LayerUpdateQueue;
	class OffscreenBuffer;
	class Rect;

	/**
	* Traverses all of the drawing commands from the layers and RenderNodes passed into it, preparing
	* them to be rendered.
	*
	* Resolves final drawing state for each operation (including clip, alpha and matrix), and then
	* reorder and merge each op as it is resolved for drawing efficiency. Each layer of content (either
	* from the LayerUpdateQueue, or temporary layers created by saveLayer operations in the
	* draw stream) will create different reorder contexts, each in its own LayerBuilder.
	*
	* Then the prepared or 'baked' drawing commands can be issued by calling the templated
	* replayBakedOps() function, which will dispatch them (including any created merged op collections)
	* to a Dispatcher and Renderer. See BakedOpDispatcher for how these baked drawing operations are
	* resolved into Glops and rendered via BakedOpRenderer.
	*
	* This class is also the authoritative source for traversing RenderNodes, both for standard op
	* traversal within a DisplayList, and for out of order RenderNode traversal for Z and projection.
	*/
	class FrameBuilder : public CanvasStateClient {
	public:
	struct LightGeometry {
	Vector3 center;
	float radius;
	};

	// TODO: remove
	FrameBuilder(const LayerUpdateQueue& layers, const SkRect& clip,
	uint32_t viewportWidth, uint32_t viewportHeight,
	const std::vector< sp<RenderNode> >& nodes,
	const LightGeometry& lightGeometry,
	Caches& caches)
	: FrameBuilder(layers, clip, viewportWidth, viewportHeight,
	nodes, lightGeometry, Rect(), caches) {}

	FrameBuilder(const LayerUpdateQueue& layers, const SkRect& clip,
	uint32_t viewportWidth, uint32_t viewportHeight,
	const std::vector< sp<RenderNode> >& nodes,
	const LightGeometry& lightGeometry,
	const Rect &contentDrawBounds,
	Caches& caches);

	virtual ~FrameBuilder() {}

	/**
	* replayBakedOps() is templated based on what class will receive ops being replayed.
	*
	* It constructs a lookup array of lambdas, which allows a recorded BakeOpState to use
	* state->op->opId to lookup a receiver that will be called when the op is replayed.
	*/
	template <typename StaticDispatcher, typename Renderer>
	void replayBakedOps(Renderer& renderer) {
	finishDefer();
	/**
	* Defines a LUT of lambdas which allow a recorded BakedOpState to use state->op->opId to
	* dispatch the op via a method on a static dispatcher when the op is replayed.
	*
	* For example a BitmapOp would resolve, via the lambda lookup, to calling:
	*
	* StaticDispatcher::onBitmapOp(Renderer& renderer, const BitmapOp& op, const BakedOpState& state);
	*/
	#define X(Type) \
	[](void* renderer, const BakedOpState& state) { \
	StaticDispatcher::on##Type((static_cast<Renderer>(renderer)), \
	static_cast<const Type&>(*(state.op)), state); \
	},
	static BakedOpReceiver unmergedReceivers[] = BUILD_RENDERABLE_OP_LUT(X);
	#undef X

	/**
	* Defines a LUT of lambdas which allow merged arrays of BakedOpState* to be passed to a
	* static dispatcher when the group of merged ops is replayed.
	*/
	#define X(Type) \
	[](void* renderer, const MergedBakedOpList& opList) { \
	StaticDispatcher::onMerged##Type##s((static_cast<Renderer>(renderer)), opList); \
	},
	static MergedOpReceiver mergedReceivers[] = BUILD_MERGEABLE_OP_LUT(X);
	#undef X

	// Relay through layers in reverse order, since layers
	// later in the list will be drawn by earlier ones
	for (int i = mLayerBuilders.size() - 1; i >= 1; i--) {
	GL_CHECKPOINT(MODERATE);
	LayerBuilder& layer = *(mLayerBuilders[i]);
	if (layer.renderNode) {
	// cached HW layer - can't skip layer if empty
	renderer.startRepaintLayer(layer.offscreenBuffer, layer.repaintRect);
	GL_CHECKPOINT(MODERATE);
	layer.replayBakedOpsImpl((void*)&renderer, unmergedReceivers, mergedReceivers);
	GL_CHECKPOINT(MODERATE);
	renderer.endLayer();
	} else if (!layer.empty()) {
	// save layer - skip entire layer if empty (in which case, LayerOp has null layer).
	layer.offscreenBuffer = renderer.startTemporaryLayer(layer.width, layer.height);
	GL_CHECKPOINT(MODERATE);
	layer.replayBakedOpsImpl((void*)&renderer, unmergedReceivers, mergedReceivers);
	GL_CHECKPOINT(MODERATE);
	renderer.endLayer();
	}
	}

	GL_CHECKPOINT(MODERATE);
	const LayerBuilder& fbo0 = *(mLayerBuilders[0]);
	renderer.startFrame(fbo0.width, fbo0.height, fbo0.repaintRect);
	GL_CHECKPOINT(MODERATE);
	fbo0.replayBakedOpsImpl((void*)&renderer, unmergedReceivers, mergedReceivers);
	GL_CHECKPOINT(MODERATE);
	renderer.endFrame(fbo0.repaintRect);
	}

	void dump() const {
	for (auto&& layer : mLayerBuilders) {
	layer->dump();
	}
	}

	///////////////////////////////////////////////////////////////////
	/// CanvasStateClient interface
	///////////////////////////////////////////////////////////////////
	virtual void onViewportInitialized() override;
	virtual void onSnapshotRestored(const Snapshot& removed, const Snapshot& restored) override;
	virtual GLuint getTargetFbo() const override { return 0; }

	private:
	void finishDefer();
	enum class ChildrenSelectMode {
	Negative,
	Positive
	};
	void saveForLayer(uint32_t layerWidth, uint32_t layerHeight,
	float contentTranslateX, float contentTranslateY,
	const Rect& repaintRect,
	const Vector3& lightCenter,
	const BeginLayerOp* beginLayerOp, RenderNode* renderNode);
	void restoreForLayer();

	LayerBuilder& currentLayer() { return *(mLayerBuilders[mLayerStack.back()]); }

	BakedOpState* tryBakeOpState(const RecordedOp& recordedOp) {
	return BakedOpState::tryConstruct(mAllocator, *mCanvasState.writableSnapshot(), recordedOp);
	}
	BakedOpState* tryBakeUnboundedOpState(const RecordedOp& recordedOp) {
	return BakedOpState::tryConstructUnbounded(mAllocator, *mCanvasState.writableSnapshot(), recordedOp);
	}


	// should always be surrounded by a save/restore pair, and not called if DisplayList is null
	void deferNodePropsAndOps(RenderNode& node);

	template <typename V>
	void defer3dChildren(ChildrenSelectMode mode, const V& zTranslatedNodes);

	void deferShadow(const RenderNodeOp& casterOp);

	void deferProjectedChildren(const RenderNode& renderNode);

	void deferNodeOps(const RenderNode& renderNode);

	void deferRenderNodeOpImpl(const RenderNodeOp& op);

	void replayBakedOpsImpl(void* arg, BakedOpReceiver* receivers);

	SkPath* createFrameAllocatedPath() {
	return mAllocator.create<SkPath>();
	}

	const BakedOpState* deferStrokeableOp(const RecordedOp& op, batchid_t batchId,
	BakedOpState::StrokeBehavior strokeBehavior = BakedOpState::StrokeBehavior::StyleDefined);

	/**
	* Declares all FrameBuilder::deferXXXXOp() methods for every RecordedOp type.
	*
	* These private methods are called from within deferImpl to defer each individual op
	* type differently.
	*/
	#define X(Type) void defer##Type(const Type& op);
	MAP_DEFERRABLE_OPS(X)
	#undef X

	// List of every deferred layer's render state. Replayed in reverse order to render a frame.
	std::vector<LayerBuilder*> mLayerBuilders;

	/*
	* Stack of indices within mLayerBuilders representing currently active layers. If drawing
	* layerA within a layerB, will contain, in order:
	* - 0 (representing FBO 0, always present)
	* - layerB's index
	* - layerA's index
	*
	* Note that this doesn't vector doesn't always map onto all values of mLayerBuilders. When a
	* layer is finished deferring, it will still be represented in mLayerBuilders, but it's index
	* won't be in mLayerStack. This is because it can be replayed, but can't have any more drawing
	* ops added to it.
	*/
	std::vector<size_t> mLayerStack;

	CanvasState mCanvasState;

	Caches& mCaches;

	float mLightRadius;

	// contains single-frame objects, such as BakedOpStates, LayerBuilders, Batches
	LinearAllocator mAllocator;
	};

	}; // namespace uirenderer
	}; // namespace android