| /* |
| * Copyright (C) 2006 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.view; |
| |
| import android.os.Parcel; |
| import android.os.Parcelable; |
| import android.util.Log; |
| import android.util.SparseIntArray; |
| import android.view.KeyCharacterMap; |
| import android.view.KeyCharacterMap.KeyData; |
| |
| /** |
| * Contains constants for key events. |
| */ |
| public class KeyEvent implements Parcelable { |
| // key codes |
| public static final int KEYCODE_UNKNOWN = 0; |
| public static final int KEYCODE_SOFT_LEFT = 1; |
| public static final int KEYCODE_SOFT_RIGHT = 2; |
| public static final int KEYCODE_HOME = 3; |
| public static final int KEYCODE_BACK = 4; |
| public static final int KEYCODE_CALL = 5; |
| public static final int KEYCODE_ENDCALL = 6; |
| public static final int KEYCODE_0 = 7; |
| public static final int KEYCODE_1 = 8; |
| public static final int KEYCODE_2 = 9; |
| public static final int KEYCODE_3 = 10; |
| public static final int KEYCODE_4 = 11; |
| public static final int KEYCODE_5 = 12; |
| public static final int KEYCODE_6 = 13; |
| public static final int KEYCODE_7 = 14; |
| public static final int KEYCODE_8 = 15; |
| public static final int KEYCODE_9 = 16; |
| public static final int KEYCODE_STAR = 17; |
| public static final int KEYCODE_POUND = 18; |
| public static final int KEYCODE_DPAD_UP = 19; |
| public static final int KEYCODE_DPAD_DOWN = 20; |
| public static final int KEYCODE_DPAD_LEFT = 21; |
| public static final int KEYCODE_DPAD_RIGHT = 22; |
| public static final int KEYCODE_DPAD_CENTER = 23; |
| public static final int KEYCODE_VOLUME_UP = 24; |
| public static final int KEYCODE_VOLUME_DOWN = 25; |
| public static final int KEYCODE_POWER = 26; |
| public static final int KEYCODE_CAMERA = 27; |
| public static final int KEYCODE_CLEAR = 28; |
| public static final int KEYCODE_A = 29; |
| public static final int KEYCODE_B = 30; |
| public static final int KEYCODE_C = 31; |
| public static final int KEYCODE_D = 32; |
| public static final int KEYCODE_E = 33; |
| public static final int KEYCODE_F = 34; |
| public static final int KEYCODE_G = 35; |
| public static final int KEYCODE_H = 36; |
| public static final int KEYCODE_I = 37; |
| public static final int KEYCODE_J = 38; |
| public static final int KEYCODE_K = 39; |
| public static final int KEYCODE_L = 40; |
| public static final int KEYCODE_M = 41; |
| public static final int KEYCODE_N = 42; |
| public static final int KEYCODE_O = 43; |
| public static final int KEYCODE_P = 44; |
| public static final int KEYCODE_Q = 45; |
| public static final int KEYCODE_R = 46; |
| public static final int KEYCODE_S = 47; |
| public static final int KEYCODE_T = 48; |
| public static final int KEYCODE_U = 49; |
| public static final int KEYCODE_V = 50; |
| public static final int KEYCODE_W = 51; |
| public static final int KEYCODE_X = 52; |
| public static final int KEYCODE_Y = 53; |
| public static final int KEYCODE_Z = 54; |
| public static final int KEYCODE_COMMA = 55; |
| public static final int KEYCODE_PERIOD = 56; |
| public static final int KEYCODE_ALT_LEFT = 57; |
| public static final int KEYCODE_ALT_RIGHT = 58; |
| public static final int KEYCODE_SHIFT_LEFT = 59; |
| public static final int KEYCODE_SHIFT_RIGHT = 60; |
| public static final int KEYCODE_TAB = 61; |
| public static final int KEYCODE_SPACE = 62; |
| public static final int KEYCODE_SYM = 63; |
| public static final int KEYCODE_EXPLORER = 64; |
| public static final int KEYCODE_ENVELOPE = 65; |
| public static final int KEYCODE_ENTER = 66; |
| public static final int KEYCODE_DEL = 67; |
| public static final int KEYCODE_GRAVE = 68; |
| public static final int KEYCODE_MINUS = 69; |
| public static final int KEYCODE_EQUALS = 70; |
| public static final int KEYCODE_LEFT_BRACKET = 71; |
| public static final int KEYCODE_RIGHT_BRACKET = 72; |
| public static final int KEYCODE_BACKSLASH = 73; |
| public static final int KEYCODE_SEMICOLON = 74; |
| public static final int KEYCODE_APOSTROPHE = 75; |
| public static final int KEYCODE_SLASH = 76; |
| public static final int KEYCODE_AT = 77; |
| public static final int KEYCODE_NUM = 78; |
| public static final int KEYCODE_HEADSETHOOK = 79; |
| public static final int KEYCODE_FOCUS = 80; // *Camera* focus |
| public static final int KEYCODE_PLUS = 81; |
| public static final int KEYCODE_MENU = 82; |
| public static final int KEYCODE_NOTIFICATION = 83; |
| public static final int KEYCODE_SEARCH = 84; |
| public static final int KEYCODE_MEDIA_PLAY_PAUSE= 85; |
| public static final int KEYCODE_MEDIA_STOP = 86; |
| public static final int KEYCODE_MEDIA_NEXT = 87; |
| public static final int KEYCODE_MEDIA_PREVIOUS = 88; |
| public static final int KEYCODE_MEDIA_REWIND = 89; |
| public static final int KEYCODE_MEDIA_FAST_FORWARD = 90; |
| public static final int KEYCODE_MUTE = 91; |
| |
| // NOTE: If you add a new keycode here you must also add it to: |
| // isSystem() |
| // frameworks/base/include/ui/KeycodeLabels.h |
| // tools/puppet_master/PuppetMaster/nav_keys.py |
| // frameworks/base/core/res/res/values/attrs.xml |
| // commands/monkey/Monkey.java |
| // emulator? |
| // |
| // Also Android currently does not reserve code ranges for vendor- |
| // specific key codes. If you have new key codes to have, you |
| // MUST contribute a patch to the open source project to define |
| // those new codes. This is intended to maintain a consistent |
| // set of key code definitions across all Android devices. |
| |
| private static final int LAST_KEYCODE = KEYCODE_MUTE; |
| |
| /** |
| * @deprecated There are now more than MAX_KEYCODE keycodes. |
| * Use {@link #getMaxKeyCode()} instead. |
| */ |
| @Deprecated |
| public static final int MAX_KEYCODE = 84; |
| |
| /** |
| * {@link #getAction} value: the key has been pressed down. |
| */ |
| public static final int ACTION_DOWN = 0; |
| /** |
| * {@link #getAction} value: the key has been released. |
| */ |
| public static final int ACTION_UP = 1; |
| /** |
| * {@link #getAction} value: multiple duplicate key events have |
| * occurred in a row, or a complex string is being delivered. If the |
| * key code is not {#link {@link #KEYCODE_UNKNOWN} then the |
| * {#link {@link #getRepeatCount()} method returns the number of times |
| * the given key code should be executed. |
| * Otherwise, if the key code {@link #KEYCODE_UNKNOWN}, then |
| * this is a sequence of characters as returned by {@link #getCharacters}. |
| */ |
| public static final int ACTION_MULTIPLE = 2; |
| |
| /** |
| * <p>This mask is used to check whether one of the ALT meta keys is pressed.</p> |
| * |
| * @see #isAltPressed() |
| * @see #getMetaState() |
| * @see #KEYCODE_ALT_LEFT |
| * @see #KEYCODE_ALT_RIGHT |
| */ |
| public static final int META_ALT_ON = 0x02; |
| |
| /** |
| * <p>This mask is used to check whether the left ALT meta key is pressed.</p> |
| * |
| * @see #isAltPressed() |
| * @see #getMetaState() |
| * @see #KEYCODE_ALT_LEFT |
| */ |
| public static final int META_ALT_LEFT_ON = 0x10; |
| |
| /** |
| * <p>This mask is used to check whether the right the ALT meta key is pressed.</p> |
| * |
| * @see #isAltPressed() |
| * @see #getMetaState() |
| * @see #KEYCODE_ALT_RIGHT |
| */ |
| public static final int META_ALT_RIGHT_ON = 0x20; |
| |
| /** |
| * <p>This mask is used to check whether one of the SHIFT meta keys is pressed.</p> |
| * |
| * @see #isShiftPressed() |
| * @see #getMetaState() |
| * @see #KEYCODE_SHIFT_LEFT |
| * @see #KEYCODE_SHIFT_RIGHT |
| */ |
| public static final int META_SHIFT_ON = 0x1; |
| |
| /** |
| * <p>This mask is used to check whether the left SHIFT meta key is pressed.</p> |
| * |
| * @see #isShiftPressed() |
| * @see #getMetaState() |
| * @see #KEYCODE_SHIFT_LEFT |
| */ |
| public static final int META_SHIFT_LEFT_ON = 0x40; |
| |
| /** |
| * <p>This mask is used to check whether the right SHIFT meta key is pressed.</p> |
| * |
| * @see #isShiftPressed() |
| * @see #getMetaState() |
| * @see #KEYCODE_SHIFT_RIGHT |
| */ |
| public static final int META_SHIFT_RIGHT_ON = 0x80; |
| |
| /** |
| * <p>This mask is used to check whether the SYM meta key is pressed.</p> |
| * |
| * @see #isSymPressed() |
| * @see #getMetaState() |
| */ |
| public static final int META_SYM_ON = 0x4; |
| |
| /** |
| * This mask is set if the device woke because of this key event. |
| */ |
| public static final int FLAG_WOKE_HERE = 0x1; |
| |
| /** |
| * This mask is set if the key event was generated by a software keyboard. |
| */ |
| public static final int FLAG_SOFT_KEYBOARD = 0x2; |
| |
| /** |
| * This mask is set if we don't want the key event to cause us to leave |
| * touch mode. |
| */ |
| public static final int FLAG_KEEP_TOUCH_MODE = 0x4; |
| |
| /** |
| * This mask is set if an event was known to come from a trusted part |
| * of the system. That is, the event is known to come from the user, |
| * and could not have been spoofed by a third party component. |
| */ |
| public static final int FLAG_FROM_SYSTEM = 0x8; |
| |
| /** |
| * This mask is used for compatibility, to identify enter keys that are |
| * coming from an IME whose enter key has been auto-labelled "next" or |
| * "done". This allows TextView to dispatch these as normal enter keys |
| * for old applications, but still do the appropriate action when |
| * receiving them. |
| */ |
| public static final int FLAG_EDITOR_ACTION = 0x10; |
| |
| /** |
| * When associated with up key events, this indicates that the key press |
| * has been canceled. Typically this is used with virtual touch screen |
| * keys, where the user can slide from the virtual key area on to the |
| * display: in that case, the application will receive a canceled up |
| * event and should not perform the action normally associated with the |
| * key. Note that for this to work, the application can not perform an |
| * action for a key until it receives an up or the long press timeout has |
| * expired. |
| */ |
| public static final int FLAG_CANCELED = 0x20; |
| |
| /** |
| * This key event was generated by a virtual (on-screen) hard key area. |
| * Typically this is an area of the touchscreen, outside of the regular |
| * display, dedicated to "hardware" buttons. |
| */ |
| public static final int FLAG_VIRTUAL_HARD_KEY = 0x40; |
| |
| /** |
| * This flag is set for the first key repeat that occurs after the |
| * long press timeout. |
| */ |
| public static final int FLAG_LONG_PRESS = 0x80; |
| |
| /** |
| * Set when a key event has {@link #FLAG_CANCELED} set because a long |
| * press action was executed while it was down. |
| */ |
| public static final int FLAG_CANCELED_LONG_PRESS = 0x100; |
| |
| /** |
| * Set for {@link #ACTION_UP} when this event's key code is still being |
| * tracked from its initial down. That is, somebody requested that tracking |
| * started on the key down and a long press has not caused |
| * the tracking to be canceled. |
| */ |
| public static final int FLAG_TRACKING = 0x200; |
| |
| /** |
| * Private control to determine when an app is tracking a key sequence. |
| * @hide |
| */ |
| public static final int FLAG_START_TRACKING = 0x40000000; |
| |
| /** |
| * Returns the maximum keycode. |
| */ |
| public static int getMaxKeyCode() { |
| return LAST_KEYCODE; |
| } |
| |
| /** |
| * Get the character that is produced by putting accent on the character |
| * c. |
| * For example, getDeadChar('`', 'e') returns è. |
| */ |
| public static int getDeadChar(int accent, int c) { |
| return KeyCharacterMap.getDeadChar(accent, c); |
| } |
| |
| static final boolean DEBUG = false; |
| static final String TAG = "KeyEvent"; |
| |
| private int mMetaState; |
| private int mAction; |
| private int mKeyCode; |
| private int mScancode; |
| private int mRepeatCount; |
| private int mDeviceId; |
| private int mFlags; |
| private long mDownTime; |
| private long mEventTime; |
| private String mCharacters; |
| |
| public interface Callback { |
| /** |
| * Called when a key down event has occurred. If you return true, |
| * you can first call {@link KeyEvent#startTracking() |
| * KeyEvent.startTracking()} to have the framework track the event |
| * through its {@link #onKeyUp(int, KeyEvent)} and also call your |
| * {@link #onKeyLongPress(int, KeyEvent)} if it occurs. |
| * |
| * @param keyCode The value in event.getKeyCode(). |
| * @param event Description of the key event. |
| * |
| * @return If you handled the event, return true. If you want to allow |
| * the event to be handled by the next receiver, return false. |
| */ |
| boolean onKeyDown(int keyCode, KeyEvent event); |
| |
| /** |
| * Called when a long press has occurred. If you return true, |
| * the final key up will have {@link KeyEvent#FLAG_CANCELED} and |
| * {@link KeyEvent#FLAG_CANCELED_LONG_PRESS} set. Note that in |
| * order to receive this callback, someone in the event change |
| * <em>must</em> return true from {@link #onKeyDown} <em>and</em> |
| * call {@link KeyEvent#startTracking()} on the event. |
| * |
| * @param keyCode The value in event.getKeyCode(). |
| * @param event Description of the key event. |
| * |
| * @return If you handled the event, return true. If you want to allow |
| * the event to be handled by the next receiver, return false. |
| */ |
| boolean onKeyLongPress(int keyCode, KeyEvent event); |
| |
| /** |
| * Called when a key up event has occurred. |
| * |
| * @param keyCode The value in event.getKeyCode(). |
| * @param event Description of the key event. |
| * |
| * @return If you handled the event, return true. If you want to allow |
| * the event to be handled by the next receiver, return false. |
| */ |
| boolean onKeyUp(int keyCode, KeyEvent event); |
| |
| /** |
| * Called when multiple down/up pairs of the same key have occurred |
| * in a row. |
| * |
| * @param keyCode The value in event.getKeyCode(). |
| * @param count Number of pairs as returned by event.getRepeatCount(). |
| * @param event Description of the key event. |
| * |
| * @return If you handled the event, return true. If you want to allow |
| * the event to be handled by the next receiver, return false. |
| */ |
| boolean onKeyMultiple(int keyCode, int count, KeyEvent event); |
| } |
| |
| /** |
| * Create a new key event. |
| * |
| * @param action Action code: either {@link #ACTION_DOWN}, |
| * {@link #ACTION_UP}, or {@link #ACTION_MULTIPLE}. |
| * @param code The key code. |
| */ |
| public KeyEvent(int action, int code) { |
| mAction = action; |
| mKeyCode = code; |
| mRepeatCount = 0; |
| } |
| |
| /** |
| * Create a new key event. |
| * |
| * @param downTime The time (in {@link android.os.SystemClock#uptimeMillis}) |
| * at which this key code originally went down. |
| * @param eventTime The time (in {@link android.os.SystemClock#uptimeMillis}) |
| * at which this event happened. |
| * @param action Action code: either {@link #ACTION_DOWN}, |
| * {@link #ACTION_UP}, or {@link #ACTION_MULTIPLE}. |
| * @param code The key code. |
| * @param repeat A repeat count for down events (> 0 if this is after the |
| * initial down) or event count for multiple events. |
| */ |
| public KeyEvent(long downTime, long eventTime, int action, |
| int code, int repeat) { |
| mDownTime = downTime; |
| mEventTime = eventTime; |
| mAction = action; |
| mKeyCode = code; |
| mRepeatCount = repeat; |
| } |
| |
| /** |
| * Create a new key event. |
| * |
| * @param downTime The time (in {@link android.os.SystemClock#uptimeMillis}) |
| * at which this key code originally went down. |
| * @param eventTime The time (in {@link android.os.SystemClock#uptimeMillis}) |
| * at which this event happened. |
| * @param action Action code: either {@link #ACTION_DOWN}, |
| * {@link #ACTION_UP}, or {@link #ACTION_MULTIPLE}. |
| * @param code The key code. |
| * @param repeat A repeat count for down events (> 0 if this is after the |
| * initial down) or event count for multiple events. |
| * @param metaState Flags indicating which meta keys are currently pressed. |
| */ |
| public KeyEvent(long downTime, long eventTime, int action, |
| int code, int repeat, int metaState) { |
| mDownTime = downTime; |
| mEventTime = eventTime; |
| mAction = action; |
| mKeyCode = code; |
| mRepeatCount = repeat; |
| mMetaState = metaState; |
| } |
| |
| /** |
| * Create a new key event. |
| * |
| * @param downTime The time (in {@link android.os.SystemClock#uptimeMillis}) |
| * at which this key code originally went down. |
| * @param eventTime The time (in {@link android.os.SystemClock#uptimeMillis}) |
| * at which this event happened. |
| * @param action Action code: either {@link #ACTION_DOWN}, |
| * {@link #ACTION_UP}, or {@link #ACTION_MULTIPLE}. |
| * @param code The key code. |
| * @param repeat A repeat count for down events (> 0 if this is after the |
| * initial down) or event count for multiple events. |
| * @param metaState Flags indicating which meta keys are currently pressed. |
| * @param device The device ID that generated the key event. |
| * @param scancode Raw device scan code of the event. |
| */ |
| public KeyEvent(long downTime, long eventTime, int action, |
| int code, int repeat, int metaState, |
| int device, int scancode) { |
| mDownTime = downTime; |
| mEventTime = eventTime; |
| mAction = action; |
| mKeyCode = code; |
| mRepeatCount = repeat; |
| mMetaState = metaState; |
| mDeviceId = device; |
| mScancode = scancode; |
| } |
| |
| /** |
| * Create a new key event. |
| * |
| * @param downTime The time (in {@link android.os.SystemClock#uptimeMillis}) |
| * at which this key code originally went down. |
| * @param eventTime The time (in {@link android.os.SystemClock#uptimeMillis}) |
| * at which this event happened. |
| * @param action Action code: either {@link #ACTION_DOWN}, |
| * {@link #ACTION_UP}, or {@link #ACTION_MULTIPLE}. |
| * @param code The key code. |
| * @param repeat A repeat count for down events (> 0 if this is after the |
| * initial down) or event count for multiple events. |
| * @param metaState Flags indicating which meta keys are currently pressed. |
| * @param device The device ID that generated the key event. |
| * @param scancode Raw device scan code of the event. |
| * @param flags The flags for this key event |
| */ |
| public KeyEvent(long downTime, long eventTime, int action, |
| int code, int repeat, int metaState, |
| int device, int scancode, int flags) { |
| mDownTime = downTime; |
| mEventTime = eventTime; |
| mAction = action; |
| mKeyCode = code; |
| mRepeatCount = repeat; |
| mMetaState = metaState; |
| mDeviceId = device; |
| mScancode = scancode; |
| mFlags = flags; |
| } |
| |
| /** |
| * Create a new key event for a string of characters. The key code, |
| * action, and repeat could will automatically be set to |
| * {@link #KEYCODE_UNKNOWN}, {@link #ACTION_MULTIPLE}, and 0 for you. |
| * |
| * @param time The time (in {@link android.os.SystemClock#uptimeMillis}) |
| * at which this event occured. |
| * @param characters The string of characters. |
| * @param device The device ID that generated the key event. |
| * @param flags The flags for this key event |
| */ |
| public KeyEvent(long time, String characters, int device, int flags) { |
| mDownTime = time; |
| mEventTime = time; |
| mCharacters = characters; |
| mAction = ACTION_MULTIPLE; |
| mKeyCode = KEYCODE_UNKNOWN; |
| mRepeatCount = 0; |
| mDeviceId = device; |
| mFlags = flags; |
| } |
| |
| /** |
| * Make an exact copy of an existing key event. |
| */ |
| public KeyEvent(KeyEvent origEvent) { |
| mDownTime = origEvent.mDownTime; |
| mEventTime = origEvent.mEventTime; |
| mAction = origEvent.mAction; |
| mKeyCode = origEvent.mKeyCode; |
| mRepeatCount = origEvent.mRepeatCount; |
| mMetaState = origEvent.mMetaState; |
| mDeviceId = origEvent.mDeviceId; |
| mScancode = origEvent.mScancode; |
| mFlags = origEvent.mFlags; |
| mCharacters = origEvent.mCharacters; |
| } |
| |
| /** |
| * Copy an existing key event, modifying its time and repeat count. |
| * |
| * @deprecated Use {@link #changeTimeRepeat(KeyEvent, long, int)} |
| * instead. |
| * |
| * @param origEvent The existing event to be copied. |
| * @param eventTime The new event time |
| * (in {@link android.os.SystemClock#uptimeMillis}) of the event. |
| * @param newRepeat The new repeat count of the event. |
| */ |
| @Deprecated |
| public KeyEvent(KeyEvent origEvent, long eventTime, int newRepeat) { |
| mDownTime = origEvent.mDownTime; |
| mEventTime = eventTime; |
| mAction = origEvent.mAction; |
| mKeyCode = origEvent.mKeyCode; |
| mRepeatCount = newRepeat; |
| mMetaState = origEvent.mMetaState; |
| mDeviceId = origEvent.mDeviceId; |
| mScancode = origEvent.mScancode; |
| mFlags = origEvent.mFlags; |
| mCharacters = origEvent.mCharacters; |
| } |
| |
| /** |
| * Create a new key event that is the same as the given one, but whose |
| * event time and repeat count are replaced with the given value. |
| * |
| * @param event The existing event to be copied. This is not modified. |
| * @param eventTime The new event time |
| * (in {@link android.os.SystemClock#uptimeMillis}) of the event. |
| * @param newRepeat The new repeat count of the event. |
| */ |
| public static KeyEvent changeTimeRepeat(KeyEvent event, long eventTime, |
| int newRepeat) { |
| return new KeyEvent(event, eventTime, newRepeat); |
| } |
| |
| /** |
| * Create a new key event that is the same as the given one, but whose |
| * event time and repeat count are replaced with the given value. |
| * |
| * @param event The existing event to be copied. This is not modified. |
| * @param eventTime The new event time |
| * (in {@link android.os.SystemClock#uptimeMillis}) of the event. |
| * @param newRepeat The new repeat count of the event. |
| * @param newFlags New flags for the event, replacing the entire value |
| * in the original event. |
| */ |
| public static KeyEvent changeTimeRepeat(KeyEvent event, long eventTime, |
| int newRepeat, int newFlags) { |
| KeyEvent ret = new KeyEvent(event); |
| ret.mEventTime = eventTime; |
| ret.mRepeatCount = newRepeat; |
| ret.mFlags = newFlags; |
| return ret; |
| } |
| |
| /** |
| * Copy an existing key event, modifying its action. |
| * |
| * @param origEvent The existing event to be copied. |
| * @param action The new action code of the event. |
| */ |
| private KeyEvent(KeyEvent origEvent, int action) { |
| mDownTime = origEvent.mDownTime; |
| mEventTime = origEvent.mEventTime; |
| mAction = action; |
| mKeyCode = origEvent.mKeyCode; |
| mRepeatCount = origEvent.mRepeatCount; |
| mMetaState = origEvent.mMetaState; |
| mDeviceId = origEvent.mDeviceId; |
| mScancode = origEvent.mScancode; |
| mFlags = origEvent.mFlags; |
| // Don't copy mCharacters, since one way or the other we'll lose it |
| // when changing the action. |
| } |
| |
| /** |
| * Create a new key event that is the same as the given one, but whose |
| * action is replaced with the given value. |
| * |
| * @param event The existing event to be copied. This is not modified. |
| * @param action The new action code of the event. |
| */ |
| public static KeyEvent changeAction(KeyEvent event, int action) { |
| return new KeyEvent(event, action); |
| } |
| |
| /** |
| * Create a new key event that is the same as the given one, but whose |
| * flags are replaced with the given value. |
| * |
| * @param event The existing event to be copied. This is not modified. |
| * @param flags The new flags constant. |
| */ |
| public static KeyEvent changeFlags(KeyEvent event, int flags) { |
| event = new KeyEvent(event); |
| event.mFlags = flags; |
| return event; |
| } |
| |
| /** |
| * Don't use in new code, instead explicitly check |
| * {@link #getAction()}. |
| * |
| * @return If the action is ACTION_DOWN, returns true; else false. |
| * |
| * @deprecated |
| * @hide |
| */ |
| @Deprecated public final boolean isDown() { |
| return mAction == ACTION_DOWN; |
| } |
| |
| /** |
| * Is this a system key? System keys can not be used for menu shortcuts. |
| * |
| * TODO: this information should come from a table somewhere. |
| * TODO: should the dpad keys be here? arguably, because they also shouldn't be menu shortcuts |
| */ |
| public final boolean isSystem() { |
| switch (mKeyCode) { |
| case KEYCODE_MENU: |
| case KEYCODE_SOFT_RIGHT: |
| case KEYCODE_HOME: |
| case KEYCODE_BACK: |
| case KEYCODE_CALL: |
| case KEYCODE_ENDCALL: |
| case KEYCODE_VOLUME_UP: |
| case KEYCODE_VOLUME_DOWN: |
| case KEYCODE_MUTE: |
| case KEYCODE_POWER: |
| case KEYCODE_HEADSETHOOK: |
| case KEYCODE_MEDIA_PLAY_PAUSE: |
| case KEYCODE_MEDIA_STOP: |
| case KEYCODE_MEDIA_NEXT: |
| case KEYCODE_MEDIA_PREVIOUS: |
| case KEYCODE_MEDIA_REWIND: |
| case KEYCODE_MEDIA_FAST_FORWARD: |
| case KEYCODE_CAMERA: |
| case KEYCODE_FOCUS: |
| case KEYCODE_SEARCH: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| |
| /** |
| * <p>Returns the state of the meta keys.</p> |
| * |
| * @return an integer in which each bit set to 1 represents a pressed |
| * meta key |
| * |
| * @see #isAltPressed() |
| * @see #isShiftPressed() |
| * @see #isSymPressed() |
| * @see #META_ALT_ON |
| * @see #META_SHIFT_ON |
| * @see #META_SYM_ON |
| */ |
| public final int getMetaState() { |
| return mMetaState; |
| } |
| |
| /** |
| * Returns the flags for this key event. |
| * |
| * @see #FLAG_WOKE_HERE |
| */ |
| public final int getFlags() { |
| return mFlags; |
| } |
| |
| /** |
| * Returns true if this key code is a modifier key. |
| * |
| * @return whether the provided keyCode is one of |
| * {@link #KEYCODE_SHIFT_LEFT} {@link #KEYCODE_SHIFT_RIGHT}, |
| * {@link #KEYCODE_ALT_LEFT}, {@link #KEYCODE_ALT_RIGHT} |
| * or {@link #KEYCODE_SYM}. |
| */ |
| public static boolean isModifierKey(int keyCode) { |
| return keyCode == KEYCODE_SHIFT_LEFT || keyCode == KEYCODE_SHIFT_RIGHT |
| || keyCode == KEYCODE_ALT_LEFT || keyCode == KEYCODE_ALT_RIGHT |
| || keyCode == KEYCODE_SYM; |
| } |
| |
| /** |
| * <p>Returns the pressed state of the ALT meta key.</p> |
| * |
| * @return true if the ALT key is pressed, false otherwise |
| * |
| * @see #KEYCODE_ALT_LEFT |
| * @see #KEYCODE_ALT_RIGHT |
| * @see #META_ALT_ON |
| */ |
| public final boolean isAltPressed() { |
| return (mMetaState & META_ALT_ON) != 0; |
| } |
| |
| /** |
| * <p>Returns the pressed state of the SHIFT meta key.</p> |
| * |
| * @return true if the SHIFT key is pressed, false otherwise |
| * |
| * @see #KEYCODE_SHIFT_LEFT |
| * @see #KEYCODE_SHIFT_RIGHT |
| * @see #META_SHIFT_ON |
| */ |
| public final boolean isShiftPressed() { |
| return (mMetaState & META_SHIFT_ON) != 0; |
| } |
| |
| /** |
| * <p>Returns the pressed state of the SYM meta key.</p> |
| * |
| * @return true if the SYM key is pressed, false otherwise |
| * |
| * @see #KEYCODE_SYM |
| * @see #META_SYM_ON |
| */ |
| public final boolean isSymPressed() { |
| return (mMetaState & META_SYM_ON) != 0; |
| } |
| |
| /** |
| * Retrieve the action of this key event. May be either |
| * {@link #ACTION_DOWN}, {@link #ACTION_UP}, or {@link #ACTION_MULTIPLE}. |
| * |
| * @return The event action: ACTION_DOWN, ACTION_UP, or ACTION_MULTIPLE. |
| */ |
| public final int getAction() { |
| return mAction; |
| } |
| |
| /** |
| * For {@link #ACTION_UP} events, indicates that the event has been |
| * canceled as per {@link #FLAG_CANCELED}. |
| */ |
| public final boolean isCanceled() { |
| return (mFlags&FLAG_CANCELED) != 0; |
| } |
| |
| /** |
| * Call this during {@link Callback#onKeyDown} to have the system track |
| * the key through its final up (possibly including a long press). Note |
| * that only one key can be tracked at a time -- if another key down |
| * event is received while a previous one is being tracked, tracking is |
| * stopped on the previous event. |
| */ |
| public final void startTracking() { |
| mFlags |= FLAG_START_TRACKING; |
| } |
| |
| /** |
| * For {@link #ACTION_UP} events, indicates that the event is still being |
| * tracked from its initial down event as per |
| * {@link #FLAG_TRACKING}. |
| */ |
| public final boolean isTracking() { |
| return (mFlags&FLAG_TRACKING) != 0; |
| } |
| |
| /** |
| * For {@link #ACTION_DOWN} events, indicates that the event has been |
| * canceled as per {@link #FLAG_LONG_PRESS}. |
| */ |
| public final boolean isLongPress() { |
| return (mFlags&FLAG_LONG_PRESS) != 0; |
| } |
| |
| /** |
| * Retrieve the key code of the key event. This is the physical key that |
| * was pressed, <em>not</em> the Unicode character. |
| * |
| * @return The key code of the event. |
| */ |
| public final int getKeyCode() { |
| return mKeyCode; |
| } |
| |
| /** |
| * For the special case of a {@link #ACTION_MULTIPLE} event with key |
| * code of {@link #KEYCODE_UNKNOWN}, this is a raw string of characters |
| * associated with the event. In all other cases it is null. |
| * |
| * @return Returns a String of 1 or more characters associated with |
| * the event. |
| */ |
| public final String getCharacters() { |
| return mCharacters; |
| } |
| |
| /** |
| * Retrieve the hardware key id of this key event. These values are not |
| * reliable and vary from device to device. |
| * |
| * {@more} |
| * Mostly this is here for debugging purposes. |
| */ |
| public final int getScanCode() { |
| return mScancode; |
| } |
| |
| /** |
| * Retrieve the repeat count of the event. For both key up and key down |
| * events, this is the number of times the key has repeated with the first |
| * down starting at 0 and counting up from there. For multiple key |
| * events, this is the number of down/up pairs that have occurred. |
| * |
| * @return The number of times the key has repeated. |
| */ |
| public final int getRepeatCount() { |
| return mRepeatCount; |
| } |
| |
| /** |
| * Retrieve the time of the most recent key down event, |
| * in the {@link android.os.SystemClock#uptimeMillis} time base. If this |
| * is a down event, this will be the same as {@link #getEventTime()}. |
| * Note that when chording keys, this value is the down time of the |
| * most recently pressed key, which may <em>not</em> be the same physical |
| * key of this event. |
| * |
| * @return Returns the most recent key down time, in the |
| * {@link android.os.SystemClock#uptimeMillis} time base |
| */ |
| public final long getDownTime() { |
| return mDownTime; |
| } |
| |
| /** |
| * Retrieve the time this event occurred, |
| * in the {@link android.os.SystemClock#uptimeMillis} time base. |
| * |
| * @return Returns the time this event occurred, |
| * in the {@link android.os.SystemClock#uptimeMillis} time base. |
| */ |
| public final long getEventTime() { |
| return mEventTime; |
| } |
| |
| /** |
| * Return the id for the keyboard that this event came from. A device |
| * id of 0 indicates the event didn't come from a physical device and |
| * maps to the default keymap. The other numbers are arbitrary and |
| * you shouldn't depend on the values. |
| * |
| * @see KeyCharacterMap#load |
| */ |
| public final int getDeviceId() { |
| return mDeviceId; |
| } |
| |
| /** |
| * Renamed to {@link #getDeviceId}. |
| * |
| * @hide |
| * @deprecated |
| */ |
| public final int getKeyboardDevice() { |
| return mDeviceId; |
| } |
| |
| /** |
| * Get the primary character for this key. In other words, the label |
| * that is physically printed on it. |
| */ |
| public char getDisplayLabel() { |
| return KeyCharacterMap.load(mDeviceId).getDisplayLabel(mKeyCode); |
| } |
| |
| /** |
| * <p> |
| * Returns the Unicode character that the key would produce. |
| * </p><p> |
| * Returns 0 if the key is not one that is used to type Unicode |
| * characters. |
| * </p><p> |
| * If the return value has bit |
| * {@link KeyCharacterMap#COMBINING_ACCENT} |
| * set, the key is a "dead key" that should be combined with another to |
| * actually produce a character -- see {@link #getDeadChar} -- |
| * after masking with |
| * {@link KeyCharacterMap#COMBINING_ACCENT_MASK}. |
| * </p> |
| */ |
| public int getUnicodeChar() { |
| return getUnicodeChar(mMetaState); |
| } |
| |
| /** |
| * <p> |
| * Returns the Unicode character that the key would produce. |
| * </p><p> |
| * Returns 0 if the key is not one that is used to type Unicode |
| * characters. |
| * </p><p> |
| * If the return value has bit |
| * {@link KeyCharacterMap#COMBINING_ACCENT} |
| * set, the key is a "dead key" that should be combined with another to |
| * actually produce a character -- see {@link #getDeadChar} -- after masking |
| * with {@link KeyCharacterMap#COMBINING_ACCENT_MASK}. |
| * </p> |
| */ |
| public int getUnicodeChar(int meta) { |
| return KeyCharacterMap.load(mDeviceId).get(mKeyCode, meta); |
| } |
| |
| /** |
| * Get the characters conversion data for the key event.. |
| * |
| * @param results a {@link KeyData} that will be filled with the results. |
| * |
| * @return whether the key was mapped or not. If the key was not mapped, |
| * results is not modified. |
| */ |
| public boolean getKeyData(KeyData results) { |
| return KeyCharacterMap.load(mDeviceId).getKeyData(mKeyCode, results); |
| } |
| |
| /** |
| * The same as {@link #getMatch(char[],int) getMatch(chars, 0)}. |
| */ |
| public char getMatch(char[] chars) { |
| return getMatch(chars, 0); |
| } |
| |
| /** |
| * If one of the chars in the array can be generated by the keyCode of this |
| * key event, return the char; otherwise return '\0'. |
| * @param chars the characters to try to find |
| * @param modifiers the modifier bits to prefer. If any of these bits |
| * are set, if there are multiple choices, that could |
| * work, the one for this modifier will be set. |
| */ |
| public char getMatch(char[] chars, int modifiers) { |
| return KeyCharacterMap.load(mDeviceId).getMatch(mKeyCode, chars, modifiers); |
| } |
| |
| /** |
| * Gets the number or symbol associated with the key. The character value |
| * is returned, not the numeric value. If the key is not a number, but is |
| * a symbol, the symbol is retuned. |
| */ |
| public char getNumber() { |
| return KeyCharacterMap.load(mDeviceId).getNumber(mKeyCode); |
| } |
| |
| /** |
| * Does the key code of this key produce a glyph? |
| */ |
| public boolean isPrintingKey() { |
| return KeyCharacterMap.load(mDeviceId).isPrintingKey(mKeyCode); |
| } |
| |
| /** |
| * @deprecated Use {@link #dispatch(Callback, DispatcherState, Object)} instead. |
| */ |
| @Deprecated |
| public final boolean dispatch(Callback receiver) { |
| return dispatch(receiver, null, null); |
| } |
| |
| /** |
| * Deliver this key event to a {@link Callback} interface. If this is |
| * an ACTION_MULTIPLE event and it is not handled, then an attempt will |
| * be made to deliver a single normal event. |
| * |
| * @param receiver The Callback that will be given the event. |
| * @param state State information retained across events. |
| * @param target The target of the dispatch, for use in tracking. |
| * |
| * @return The return value from the Callback method that was called. |
| */ |
| public final boolean dispatch(Callback receiver, DispatcherState state, |
| Object target) { |
| switch (mAction) { |
| case ACTION_DOWN: { |
| mFlags &= ~FLAG_START_TRACKING; |
| if (DEBUG) Log.v(TAG, "Key down to " + target + " in " + state |
| + ": " + this); |
| boolean res = receiver.onKeyDown(mKeyCode, this); |
| if (state != null) { |
| if (res && mRepeatCount == 0 && (mFlags&FLAG_START_TRACKING) != 0) { |
| if (DEBUG) Log.v(TAG, " Start tracking!"); |
| state.startTracking(this, target); |
| } else if (isLongPress() && state.isTracking(this)) { |
| try { |
| if (receiver.onKeyLongPress(mKeyCode, this)) { |
| if (DEBUG) Log.v(TAG, " Clear from long press!"); |
| state.performedLongPress(this); |
| res = true; |
| } |
| } catch (AbstractMethodError e) { |
| } |
| } |
| } |
| return res; |
| } |
| case ACTION_UP: |
| if (DEBUG) Log.v(TAG, "Key up to " + target + " in " + state |
| + ": " + this); |
| if (state != null) { |
| state.handleUpEvent(this); |
| } |
| return receiver.onKeyUp(mKeyCode, this); |
| case ACTION_MULTIPLE: |
| final int count = mRepeatCount; |
| final int code = mKeyCode; |
| if (receiver.onKeyMultiple(code, count, this)) { |
| return true; |
| } |
| if (code != KeyEvent.KEYCODE_UNKNOWN) { |
| mAction = ACTION_DOWN; |
| mRepeatCount = 0; |
| boolean handled = receiver.onKeyDown(code, this); |
| if (handled) { |
| mAction = ACTION_UP; |
| receiver.onKeyUp(code, this); |
| } |
| mAction = ACTION_MULTIPLE; |
| mRepeatCount = count; |
| return handled; |
| } |
| return false; |
| } |
| return false; |
| } |
| |
| /** |
| * Use with {@link KeyEvent#dispatch(Callback, DispatcherState, Object)} |
| * for more advanced key dispatching, such as long presses. |
| */ |
| public static class DispatcherState { |
| int mDownKeyCode; |
| Object mDownTarget; |
| SparseIntArray mActiveLongPresses = new SparseIntArray(); |
| |
| /** |
| * Reset back to initial state. |
| */ |
| public void reset() { |
| if (DEBUG) Log.v(TAG, "Reset: " + this); |
| mDownKeyCode = 0; |
| mDownTarget = null; |
| mActiveLongPresses.clear(); |
| } |
| |
| /** |
| * Stop any tracking associated with this target. |
| */ |
| public void reset(Object target) { |
| if (mDownTarget == target) { |
| if (DEBUG) Log.v(TAG, "Reset in " + target + ": " + this); |
| mDownKeyCode = 0; |
| mDownTarget = null; |
| } |
| } |
| |
| /** |
| * Start tracking the key code associated with the given event. This |
| * can only be called on a key down. It will allow you to see any |
| * long press associated with the key, and will result in |
| * {@link KeyEvent#isTracking} return true on the long press and up |
| * events. |
| * |
| * <p>This is only needed if you are directly dispatching events, rather |
| * than handling them in {@link Callback#onKeyDown}. |
| */ |
| public void startTracking(KeyEvent event, Object target) { |
| if (event.getAction() != ACTION_DOWN) { |
| throw new IllegalArgumentException( |
| "Can only start tracking on a down event"); |
| } |
| if (DEBUG) Log.v(TAG, "Start trackingt in " + target + ": " + this); |
| mDownKeyCode = event.getKeyCode(); |
| mDownTarget = target; |
| } |
| |
| /** |
| * Return true if the key event is for a key code that is currently |
| * being tracked by the dispatcher. |
| */ |
| public boolean isTracking(KeyEvent event) { |
| return mDownKeyCode == event.getKeyCode(); |
| } |
| |
| /** |
| * Keep track of the given event's key code as having performed an |
| * action with a long press, so no action should occur on the up. |
| * <p>This is only needed if you are directly dispatching events, rather |
| * than handling them in {@link Callback#onKeyLongPress}. |
| */ |
| public void performedLongPress(KeyEvent event) { |
| mActiveLongPresses.put(event.getKeyCode(), 1); |
| } |
| |
| /** |
| * Handle key up event to stop tracking. This resets the dispatcher state, |
| * and updates the key event state based on it. |
| * <p>This is only needed if you are directly dispatching events, rather |
| * than handling them in {@link Callback#onKeyUp}. |
| */ |
| public void handleUpEvent(KeyEvent event) { |
| final int keyCode = event.getKeyCode(); |
| if (DEBUG) Log.v(TAG, "Handle key up " + event + ": " + this); |
| int index = mActiveLongPresses.indexOfKey(keyCode); |
| if (index >= 0) { |
| if (DEBUG) Log.v(TAG, " Index: " + index); |
| event.mFlags |= FLAG_CANCELED | FLAG_CANCELED_LONG_PRESS; |
| mActiveLongPresses.removeAt(index); |
| } |
| if (mDownKeyCode == keyCode) { |
| if (DEBUG) Log.v(TAG, " Tracking!"); |
| event.mFlags |= FLAG_TRACKING; |
| mDownKeyCode = 0; |
| mDownTarget = null; |
| } |
| } |
| } |
| |
| public String toString() { |
| return "KeyEvent{action=" + mAction + " code=" + mKeyCode |
| + " repeat=" + mRepeatCount |
| + " meta=" + mMetaState + " scancode=" + mScancode |
| + " mFlags=" + mFlags + "}"; |
| } |
| |
| public static final Parcelable.Creator<KeyEvent> CREATOR |
| = new Parcelable.Creator<KeyEvent>() { |
| public KeyEvent createFromParcel(Parcel in) { |
| return new KeyEvent(in); |
| } |
| |
| public KeyEvent[] newArray(int size) { |
| return new KeyEvent[size]; |
| } |
| }; |
| |
| public int describeContents() { |
| return 0; |
| } |
| |
| public void writeToParcel(Parcel out, int flags) { |
| out.writeInt(mAction); |
| out.writeInt(mKeyCode); |
| out.writeInt(mRepeatCount); |
| out.writeInt(mMetaState); |
| out.writeInt(mDeviceId); |
| out.writeInt(mScancode); |
| out.writeInt(mFlags); |
| out.writeLong(mDownTime); |
| out.writeLong(mEventTime); |
| } |
| |
| private KeyEvent(Parcel in) { |
| mAction = in.readInt(); |
| mKeyCode = in.readInt(); |
| mRepeatCount = in.readInt(); |
| mMetaState = in.readInt(); |
| mDeviceId = in.readInt(); |
| mScancode = in.readInt(); |
| mFlags = in.readInt(); |
| mDownTime = in.readLong(); |
| mEventTime = in.readLong(); |
| } |
| } |