| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef ANDROID_EFFECTAPI_H_ |
| #define ANDROID_EFFECTAPI_H_ |
| |
| #include <errno.h> |
| #include <stdint.h> |
| #include <sys/types.h> |
| #include <media/AudioCommon.h> |
| |
| #if __cplusplus |
| extern "C" { |
| #endif |
| |
| ///////////////////////////////////////////////// |
| // Effect control interface |
| ///////////////////////////////////////////////// |
| |
| // The effect control interface is exposed by each effect engine implementation. It consists of |
| // a set of functions controlling the configuration, activation and process of the engine. |
| // The functions are grouped in a structure of type effect_interface_s: |
| // struct effect_interface_s { |
| // effect_process_t process; |
| // effect_command_t command; |
| // }; |
| |
| |
| // effect_interface_t: Effect control interface handle. |
| // The effect_interface_t serves two purposes regarding the implementation of the effect engine: |
| // - 1 it is the address of a pointer to an effect_interface_s structure where the functions |
| // of the effect control API for a particular effect are located. |
| // - 2 it is the address of the context of a particular effect instance. |
| // A typical implementation in the effect library would define a structure as follows: |
| // struct effect_module_s { |
| // const struct effect_interface_s *itfe; |
| // effect_config_t config; |
| // effect_context_t context; |
| // } |
| // The implementation of EffectCreate() function would then allocate a structure of this |
| // type and return its address as effect_interface_t |
| typedef struct effect_interface_s **effect_interface_t; |
| |
| |
| // Effect API version 1.0 |
| #define EFFECT_API_VERSION 0x0100 // Format 0xMMmm MM: Major version, mm: minor version |
| |
| // Maximum length of character strings in structures defines by this API. |
| #define EFFECT_STRING_LEN_MAX 64 |
| |
| // |
| //--- Effect descriptor structure effect_descriptor_t |
| // |
| |
| // Unique effect ID (can be generated from the following site: http://www.itu.int/ITU-T/asn1/uuid.html) |
| // This format is used for both "type" and "uuid" fields of the effect descriptor structure. |
| // - When used for effect type and the engine is implementing and effect corresponding to a standard OpenSL ES |
| // interface, this ID must be the one defined in OpenSLES_IID.h for that interface. |
| // - When used as uuid, it should be a unique UUID for this particular implementation. |
| typedef struct effect_uuid_s { |
| uint32_t timeLow; |
| uint16_t timeMid; |
| uint16_t timeHiAndVersion; |
| uint16_t clockSeq; |
| uint8_t node[6]; |
| } effect_uuid_t; |
| |
| // NULL UUID definition (matches SL_IID_NULL_) |
| #define EFFECT_UUID_INITIALIZER { 0xec7178ec, 0xe5e1, 0x4432, 0xa3f4, { 0x46, 0x57, 0xe6, 0x79, 0x52, 0x10 } } |
| static const effect_uuid_t EFFECT_UUID_NULL_ = EFFECT_UUID_INITIALIZER; |
| const effect_uuid_t * const EFFECT_UUID_NULL = &EFFECT_UUID_NULL_; |
| const char * const EFFECT_UUID_NULL_STR = "ec7178ec-e5e1-4432-a3f4-4657e6795210"; |
| |
| // the effect descriptor contains necessary information to facilitate the enumeration of the effect |
| // engines present in a library. |
| typedef struct effect_descriptor_s { |
| effect_uuid_t type; // UUID corresponding to the OpenSL ES interface implemented by this effect |
| effect_uuid_t uuid; // UUID for this particular implementation |
| uint16_t apiVersion; // Version of the effect API implemented: must match current EFFECT_API_VERSION |
| uint32_t flags; // effect engine capabilities/requirements flags (see below) |
| char name[EFFECT_STRING_LEN_MAX] ; // human readable effect name |
| char implementor[EFFECT_STRING_LEN_MAX] ; // human readable effect implementor name |
| } effect_descriptor_t; |
| |
| // definitions for flags field of effect descriptor. |
| // +---------------------------+-----------+----------------------------------- |
| // | description | bits | values |
| // +---------------------------+-----------+----------------------------------- |
| // | connection mode | 0..1 | 0 insert: after track process |
| // | | | 1 auxiliary: connect to track auxiliary |
| // | | | output and use send level |
| // | | | 2 replace: replaces track process function; |
| // | | | must implement SRC, volume and mono to stereo. |
| // | | | 3 reserved |
| // +---------------------------+-----------+----------------------------------- |
| // | insertion preference | 2..4 | 0 none |
| // | | | 1 first of the chain |
| // | | | 2 last of the chain |
| // | | | 3 exclusive (only effect in the insert chain) |
| // | | | 4..7 reserved |
| // +---------------------------+-----------+----------------------------------- |
| // | Volume management | 5..6 | 0 none |
| // | | | 1 implements volume control |
| // | | | 2 requires volume indication |
| // | | | 3 reserved |
| // +---------------------------+-----------+----------------------------------- |
| // | Device management | 7..8 | 0 none |
| // | | | 1 requires device updates |
| // | | | 2..3 reserved |
| // +---------------------------+-----------+----------------------------------- |
| // | Sample input mode | 9..10 | 0 direct: process() function or EFFECT_CMD_CONFIGURE |
| // | | | command must specify a buffer descriptor |
| // | | | 1 provider: process() function uses the |
| // | | | bufferProvider indicated by the |
| // | | | EFFECT_CMD_CONFIGURE command to request input buffers. |
| // | | | 2 both: both input modes are supported |
| // | | | 3 reserved |
| // +---------------------------+-----------+----------------------------------- |
| // | Sample output mode | 11..12 | 0 direct: process() function or EFFECT_CMD_CONFIGURE |
| // | | | command must specify a buffer descriptor |
| // | | | 1 provider: process() function uses the |
| // | | | bufferProvider indicated by the |
| // | | | EFFECT_CMD_CONFIGURE command to request output buffers. |
| // | | | 2 both: both output modes are supported |
| // | | | 3 reserved |
| // +---------------------------+-----------+----------------------------------- |
| |
| // insert mode |
| #define EFFECT_FLAG_TYPE_MASK 0x00000003 |
| #define EFFECT_FLAG_TYPE_INSERT 0x00000000 |
| #define EFFECT_FLAG_TYPE_AUXILIARY 0x00000001 |
| #define EFFECT_FLAG_TYPE_REPLACE 0x00000002 |
| |
| // insert preference |
| #define EFFECT_FLAG_INSERT_MASK 0x0000001C |
| #define EFFECT_FLAG_INSERT_ANY 0x00000000 |
| #define EFFECT_FLAG_INSERT_FIRST 0x00000004 |
| #define EFFECT_FLAG_INSERT_LAST 0x00000008 |
| #define EFFECT_FLAG_INSERT_EXCLUSIVE 0x0000000C |
| |
| |
| // volume control |
| #define EFFECT_FLAG_VOLUME_MASK 0x00000060 |
| #define EFFECT_FLAG_VOLUME_CTRL 0x00000020 |
| #define EFFECT_FLAG_VOLUME_IND 0x00000040 |
| #define EFFECT_FLAG_VOLUME_NONE 0x00000000 |
| |
| // device control |
| #define EFFECT_FLAG_DEVICE_MASK 0x00000180 |
| #define EFFECT_FLAG_DEVICE_IND 0x00000080 |
| #define EFFECT_FLAG_DEVICE_NONE 0x00000000 |
| |
| // sample input modes |
| #define EFFECT_FLAG_INPUT_MASK 0x00000600 |
| #define EFFECT_FLAG_INPUT_DIRECT 0x00000000 |
| #define EFFECT_FLAG_INPUT_PROVIDER 0x00000200 |
| #define EFFECT_FLAG_INPUT_BOTH 0x00000400 |
| |
| // sample output modes |
| #define EFFECT_FLAG_OUTPUT_MASK 0x00001800 |
| #define EFFECT_FLAG_OUTPUT_DIRECT 0x00000000 |
| #define EFFECT_FLAG_OUTPUT_PROVIDER 0x00000800 |
| #define EFFECT_FLAG_OUTPUT_BOTH 0x00001000 |
| |
| // forward definition of type audio_buffer_t |
| typedef struct audio_buffer_s audio_buffer_t; |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // |
| // Function: process |
| // |
| // Description: Effect process function. Takes input samples as specified |
| // (count and location) in input buffer descriptor and output processed |
| // samples as specified in output buffer descriptor. If the buffer descriptor |
| // is not specified the function must use either the buffer or the |
| // buffer provider function installed by the EFFECT_CMD_CONFIGURE command. |
| // |
| // NOTE: the process() function implementation should be "real-time safe" that is |
| // it should not perform blocking calls: malloc/free, sleep, read/write/open/close, |
| // pthread_cond_wait/pthread_mutex_lock... |
| // |
| // Input: |
| // effect_interface_t: handle to the effect interface this function |
| // is called on. |
| // inBuffer: buffer descriptor indicating where to read samples to process. |
| // If NULL, use the configuration passed by EFFECT_CMD_CONFIGURE command. |
| // |
| // inBuffer: buffer descriptor indicating where to write processed samples. |
| // If NULL, use the configuration passed by EFFECT_CMD_CONFIGURE command. |
| // |
| // Output: |
| // returned value: 0 successful operation |
| // -EINVAL invalid interface handle or |
| // invalid input/output buffer description |
| //////////////////////////////////////////////////////////////////////////////// |
| typedef int32_t (*effect_process_t)(effect_interface_t self, audio_buffer_t *inBuffer, audio_buffer_t *outBuffer); |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // |
| // Function: command |
| // |
| // Description: Send a command and receive a response to/from effect engine. |
| // |
| // Input: |
| // effect_interface_t: handle to the effect interface this function |
| // is called on. |
| // cmdCode: command code: the command can be a standardized command defined in |
| // effect_command_e (see below) or a proprietary command. |
| // cmdSize: size of command in bytes |
| // pCmdData: pointer to command data |
| // pReplyData: pointer to reply data |
| // |
| // Input/Output: |
| // replySize: maximum size of reply data as input |
| // actual size of reply data as output |
| // |
| // Output: |
| // returned value: 0 successful operation |
| // -EINVAL invalid interface handle or |
| // invalid command/reply size or format according to command code |
| // The return code should be restricted to indicate problems related to the this |
| // API specification. Status related to the execution of a particular command should be |
| // indicated as part of the reply field. |
| // |
| // *pReplyData updated with command response |
| // |
| //////////////////////////////////////////////////////////////////////////////// |
| typedef int32_t (*effect_command_t)(effect_interface_t self, int32_t cmdCode, int32_t cmdSize, void *pCmdData, int32_t *replySize, void *pReplyData); |
| |
| |
| // Effect control interface definition |
| struct effect_interface_s { |
| effect_process_t process; |
| effect_command_t command; |
| }; |
| |
| |
| //--- Standardized command codes for command function |
| // +--------------------------------+-------------------------------+-------------------------------+-------------------------- |
| // | description | command code | command format | reply format |
| // +--------------------------------+-------------------------------+-------------------------------+-------------------------- |
| // | Initialize effect engine: | EFFECT_CMD_INIT | size: 0 | size: sizeof(int) |
| // | All configurations return to | | data: N/A | data: status |
| // | default | | | |
| // +--------------------------------+-------------------------------+-------------------------------+-------------------------- |
| // | Apply new audio parameters | EFFECT_CMD_CONFIGURE | size: sizeof(effect_config_t) | size: sizeof(int) |
| // | configurations for input and | | data: effect_config_t | data: status |
| // | output buffers | | | |
| // +--------------------------------+-------------------------------+-------------------------------+-------------------------- |
| // | Reset effect engine: keep | EFFECT_CMD_RESET | size: 0 | size: 0 |
| // | configuration but reset state | | data: N/A | data: N/A |
| // | and buffer content. | | | |
| // | Called by the framework before | | | |
| // | enabling the effect | | | |
| // +--------------------------------+-------------------------------+-------------------------------+-------------------------- |
| // | Enable the process | EFFECT_CMD_ENABLE | size: 0 | size: sizeof(int) |
| // | Called by the framework before | | data: N/A | data: status |
| // | the first call to process() | | | |
| // +--------------------------------+-------------------------------+-------------------------------+-------------------------- |
| // | Disable the process | EFFECT_CMD_DISABLE | size: 0 | size: sizeof(int) |
| // | Called by the framework after | | data: N/A | data: status |
| // | the last call to process() | | | |
| // +--------------------------------+-------------------------------+-------------------------------+-------------------------- |
| // | Set a parameter and apply it | EFFECT_CMD_SET_PARAM | size: sizeof(effect_param_t) | size: sizeof(int) |
| // | immediately | | + size of param + value | data: status |
| // | | | data: effect_param_t | |
| // +--------------------------------+-------------------------------+-------------------------------+-------------------------- |
| // | Set a parameter but apply it | EFFECT_CMD_SET_PARAM_DEFERRED | size: sizeof(effect_param_t) | size: 0 |
| // | only when receiving command | | + size of param + value | data: N/A |
| // | EFFECT_CMD_SET_PARAM_COMMIT | | data: effect_param_t | |
| // +--------------------------------+-------------------------------+-------------------------------+-------------------------- |
| // | Apply all previously received | EFFECT_CMD_SET_PARAM_COMMIT | size: 0 | size: sizeof(int) |
| // | EFFECT_CMD_SET_PARAM_DEFERRED | | data: N/A | data: status |
| // | commands | | | |
| // +--------------------------------+-------------------------------+-------------------------------+-------------------------- |
| // | Get a parameter value | EFFECT_CMD_GET_PARAM | size: sizeof(effect_param_t) | size: sizeof(effect_param_t) |
| // | | | + size of param | + size of param + value |
| // | | | data: effect_param_t | data: effect_param_t |
| // +--------------------------------+-------------------------------+-------------------------------+-------------------------- |
| // | Set the rendering device the | EFFECT_CMD_SET_DEVICE | size: sizeof(uint32_t) | size: 0 |
| // | audio output path is connected | | data: audio_device_e | data: N/A |
| // | to. See audio_device_e in | | | |
| // | AudioCommon.h for device values| | | |
| // +--------------------------------+-------------------------------+-------------------------------+-------------------------- |
| // | Set and get volume. Used by | EFFECT_CMD_SET_VOLUME | size: n * sizeof(uint32_t) | size: n * sizeof(uint32_t) |
| // | audio framework to delegate | | data: volume for each channel | data: volume for each channel |
| // | volume control to effect engine| | defined in effect_config_t in | defined in effect_config_t in |
| // | If volume control flag is set | | 8.24 fixed point format | 8.24 fixed point format |
| // | in the effect descriptor, the | | | It is legal to receive a null |
| // | effect engine must return the | | | pointer as pReplyData in which |
| // | volume that should be applied | | | case the effect framework has |
| // | before the effect is processed | | | delegated volume control to |
| // | The overall volume (the volume | | | another effect. |
| // | actually applied by the effect | | | |
| // | multiplied by the returned | | | |
| // | value) should match the | | | |
| // | requested value | | | |
| // +--------------------------------+-------------------------------+-------------------------------+-------------------------- |
| // | All proprietary effect commands| EFFECT_CMD_FIRST_PROPRIETARY | | |
| // | must use command codes above | | | |
| // | this value. The size and format| | | |
| // | of command and response fields | | | |
| // | is free in this case. | | | |
| // +--------------------------------+-------------------------------+-------------------------------+-------------------------- |
| |
| |
| enum effect_command_e { |
| EFFECT_CMD_INIT, // initialize effect engine |
| EFFECT_CMD_CONFIGURE, // configure effect engine (see effect_config_t) |
| EFFECT_CMD_RESET, // reset effect engine |
| EFFECT_CMD_ENABLE, // enable effect process |
| EFFECT_CMD_DISABLE, // disable effect process |
| EFFECT_CMD_SET_PARAM, // set parameter immediately (see effect_param_t) |
| EFFECT_CMD_SET_PARAM_DEFERRED, // set parameter deferred |
| EFFECT_CMD_SET_PARAM_COMMIT, // commit previous set parameter deferred |
| EFFECT_CMD_GET_PARAM, // get parameter |
| EFFECT_CMD_SET_DEVICE, // set audio device (see audio_device_e in AudioCommon.h) |
| EFFECT_CMD_SET_VOLUME, // set volume |
| EFFECT_CMD_FIRST_PROPRIETARY = 0x10000 // first proprietary command code |
| }; |
| |
| // Audio buffer descriptor used by process(), bufferProvider() functions and buffer_config_t structure |
| // Multi-channel audio is always interleaved. The channel order is from LSB to MSB with regard to the |
| // channel mask definition in audio_channels_e (AudioCommon.h) e.g : |
| // Stereo: left, right |
| // 5 point 1: front left, front right, front center, low frequency, back left, back right |
| // The buffer size is expressed in frame count, a frame being composed of samples for all |
| // channels at a given time |
| struct audio_buffer_s { |
| size_t frameCount; // number of frames in buffer |
| union { |
| void* raw; // raw pointer to start of buffer |
| int32_t* s32; // pointer to signed 32 bit data at start of buffer |
| int16_t* s16; // pointer to signed 16 bit data at start of buffer |
| uint8_t* u8; // pointer to unsigned 8 bit data at start of buffer |
| }; |
| }; |
| |
| // the buffer_provider_s structure contains functions that can be used |
| // by the effect engine process() function to query and release input |
| // or output audio buffer. |
| // The getBuffer() function is called to retrieve a buffer where data |
| // should read from or written to by process() function. |
| // The releaseBuffer() function MUST be called when the buffer retrieved |
| // with getBuffer() is not needed anymore. |
| // The process function should use the buffer provider mechanism to retrieve |
| // input or output buffer if the inBuffer or outBuffer passed as argument is NULL |
| // and the buffer configuration (buffer_config_t) given by the EFFECT_CMD_CONFIGURE |
| // command did not specify an audio buffer. |
| |
| typedef int32_t (* buffer_function_t)(void *cookie, audio_buffer_t *buffer); |
| |
| typedef struct buffer_provider_s { |
| buffer_function_t getBuffer; // retrieve next buffer |
| buffer_function_t releaseBuffer; // release used buffer |
| void *cookie; // for use by client of buffer provider functions |
| } buffer_provider_t; |
| |
| // The buffer_config_s structure specifies the input or output audio format |
| // to be used by the effect engine. It is part of the effect_config_t |
| // structure that defines both input and output buffer configurations and is |
| // passed by the EFFECT_CMD_CONFIGURE command. |
| typedef struct buffer_config_s { |
| audio_buffer_t buffer; // buffer for use by process() function if not passed explicitly |
| uint32_t samplingRate; // sampling rate |
| uint32_t channels; // channel mask (see audio_channels_e in AudioCommon.h) |
| buffer_provider_t bufferProvider; // buffer provider |
| uint8_t format; // PCM format (see audio_format_e in AudioCommon.h) |
| uint8_t accessMode; // read/write or accumulate in buffer (effect_buffer_access_e) |
| uint16_t mask; // indicates which of the above fields is valid |
| } buffer_config_t; |
| |
| // values for "accessMode" field of buffer_config_t: |
| // overwrite, read only, accumulate (read/modify/write) |
| enum effect_buffer_access_e { |
| EFFECT_BUFFER_ACCESS_WRITE, |
| EFFECT_BUFFER_ACCESS_READ, |
| EFFECT_BUFFER_ACCESS_ACCUMULATE |
| |
| }; |
| |
| // values for bit field "mask" in buffer_config_t. If a bit is set, the corresponding field |
| // in buffer_config_t must be taken into account when executing the EFFECT_CMD_CONFIGURE command |
| #define EFFECT_CONFIG_BUFFER 0x0001 // buffer field must be taken into account |
| #define EFFECT_CONFIG_SMP_RATE 0x0002 // samplingRate field must be taken into account |
| #define EFFECT_CONFIG_CHANNELS 0x0004 // channels field must be taken into account |
| #define EFFECT_CONFIG_FORMAT 0x0008 // format field must be taken into account |
| #define EFFECT_CONFIG_ACC_MODE 0x0010 // accessMode field must be taken into account |
| #define EFFECT_CONFIG_PROVIDER 0x0020 // bufferProvider field must be taken into account |
| #define EFFECT_CONFIG_ALL (EFFECT_CONFIG_BUFFER | EFFECT_CONFIG_SMP_RATE | \ |
| EFFECT_CONFIG_CHANNELS | EFFECT_CONFIG_FORMAT | \ |
| EFFECT_CONFIG_ACC_MODE | EFFECT_CONFIG_PROVIDER) |
| |
| // effect_config_s structure describes the format of the pCmdData argument of EFFECT_CMD_CONFIGURE command |
| // to configure audio parameters and buffers for effect engine input and output. |
| typedef struct effect_config_s { |
| buffer_config_t inputCfg; |
| buffer_config_t outputCfg;; |
| } effect_config_t; |
| |
| // effect_param_s structure describes the format of the pCmdData argument of EFFECT_CMD_SET_PARAM |
| // command and pCmdData and pReplyData of EFFECT_CMD_GET_PARAM command. |
| // psize and vsize represent the actual size of parameter and value. |
| // |
| // NOTE: the start of value field inside the data field is always on a 32 bit boundary: |
| // |
| // +-----------+ |
| // | status | sizeof(int) |
| // +-----------+ |
| // | psize | sizeof(int) |
| // +-----------+ |
| // | vsize | sizeof(int) |
| // +-----------+ |
| // | | | | |
| // ~ parameter ~ > psize | |
| // | | | > ((psize - 1)/sizeof(int) + 1) * sizeof(int) |
| // +-----------+ | |
| // | padding | | |
| // +-----------+ |
| // | | | |
| // ~ value ~ > vsize |
| // | | | |
| // +-----------+ |
| |
| typedef struct effect_param_s { |
| int32_t status; // Transaction status (unused for command, used for reply) |
| uint32_t psize; // Parameter size |
| uint32_t vsize; // Value size |
| char data[]; // Start of Parameter + Value data |
| } effect_param_t; |
| |
| |
| ///////////////////////////////////////////////// |
| // Effect library interface |
| ///////////////////////////////////////////////// |
| |
| // An effect library is required to implement and expose the following functions |
| // to enable effect enumeration and instantiation. The name of these functions must be as |
| // specified here as the effect framework will get the function address with dlsym(): |
| // |
| // - effect_QueryNumberEffects_t EffectQueryNumberEffects; |
| // - effect_QueryNextEffect_t EffectQueryNext; |
| // - effect_CreateEffect_t EffectCreate; |
| // - effect_ReleaseEffect_t EffectRelease; |
| |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // |
| // Function: EffectQueryNumberEffects |
| // |
| // Description: Returns the number of different effects exposed by the |
| // library. Each effect must have a unique effect uuid (see |
| // effect_descriptor_t). This function together with EffectQueryNext() |
| // is used to enumerate all effects present in the library. |
| // Each time EffectQueryNumberEffects() is called, the library must |
| // reset the index of the effect descriptor returned by next call to |
| // EffectQueryNext() to restart enumeration from the beginning. |
| // |
| // Input/Output: |
| // pNumEffects: address where the number of effects should be returned. |
| // |
| // Output: |
| // returned value: 0 successful operation. |
| // -ENODEV library failed to initialize |
| // -EINVAL invalid pNumEffects |
| // *pNumEffects: updated with number of effects in library |
| // |
| //////////////////////////////////////////////////////////////////////////////// |
| typedef int32_t (*effect_QueryNumberEffects_t)(uint32_t *pNumEffects); |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // |
| // Function: EffectQueryNext |
| // |
| // Description: Returns a descriptor of the next available effect. |
| // See effect_descriptor_t for details on effect descriptors. |
| // This function together with EffectQueryNext() is used to enumerate all |
| // effects present in the library. The enumeration sequence is: |
| // EffectQueryNumberEffects(&num_effects); |
| // while (num_effects--) |
| // EffectQueryNext(); |
| // |
| // Input/Output: |
| // pDescriptor: address where to return the effect descriptor. |
| // |
| // Output: |
| // returned value: 0 successful operation. |
| // -ENODEV library failed to initialize |
| // -EINVAL invalid pDescriptor |
| // -ENOENT no more effect available |
| // *pDescriptor: updated with the effect descriptor. |
| // |
| //////////////////////////////////////////////////////////////////////////////// |
| typedef int32_t (*effect_QueryNextEffect_t)(effect_descriptor_t *pDescriptor); |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // |
| // Function: EffectCreate |
| // |
| // Description: Creates an effect engine of the specified type and returns an |
| // effect control interface on this engine. The function will allocate the |
| // resources for an instance of the requested effect engine and return |
| // a handle on the effect control interface. |
| // |
| // Input: |
| // pEffectUuid: pointer to the effect uuid. |
| // |
| // Input/Output: |
| // pInterface: address where to return the effect interface. |
| // |
| // Output: |
| // returned value: 0 successful operation. |
| // -ENODEV library failed to initialize |
| // -EINVAL invalid pEffectUuid or pInterface |
| // -ENOENT no effect with this uuid found |
| // *pInterface: updated with the effect interface handle. |
| // |
| //////////////////////////////////////////////////////////////////////////////// |
| typedef int32_t (*effect_CreateEffect_t)(effect_uuid_t *uuid, effect_interface_t *pInterface); |
| |
| //////////////////////////////////////////////////////////////////////////////// |
| // |
| // Function: EffectRelease |
| // |
| // Description: Releases the effect engine whose handle is given as argument. |
| // All resources allocated to this particular instance of the effect are |
| // released. |
| // |
| // Input: |
| // interface: handle on the effect interface to be released. |
| // |
| // Output: |
| // returned value: 0 successful operation. |
| // -ENODEV library failed to initialize |
| // -EINVAL invalid interface handle |
| // |
| //////////////////////////////////////////////////////////////////////////////// |
| typedef int32_t (*effect_ReleaseEffect_t)(effect_interface_t interface); |
| |
| |
| #if __cplusplus |
| } // extern "C" |
| #endif |
| |
| |
| #endif /*ANDROID_EFFECTAPI_H_*/ |