| /* |
| * Copyright (C) 2007 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "SurfaceFlinger" |
| |
| #include <stdlib.h> |
| #include <stdint.h> |
| #include <sys/types.h> |
| |
| #include <utils/Errors.h> |
| #include <utils/Log.h> |
| |
| #include <GLES/gl.h> |
| #include <GLES/glext.h> |
| |
| #include <hardware/hardware.h> |
| |
| #include "clz.h" |
| #include "LayerBase.h" |
| #include "LayerBlur.h" |
| #include "SurfaceFlinger.h" |
| #include "DisplayHardware/DisplayHardware.h" |
| |
| |
| // We don't honor the premultiplied alpha flags, which means that |
| // premultiplied surface may be composed using a non-premultiplied |
| // equation. We do this because it may be a lot faster on some hardware |
| // The correct value is HONOR_PREMULTIPLIED_ALPHA = 1 |
| #define HONOR_PREMULTIPLIED_ALPHA 0 |
| |
| namespace android { |
| |
| // --------------------------------------------------------------------------- |
| |
| const uint32_t LayerBase::typeInfo = 1; |
| const char* const LayerBase::typeID = "LayerBase"; |
| |
| const uint32_t LayerBaseClient::typeInfo = LayerBase::typeInfo | 2; |
| const char* const LayerBaseClient::typeID = "LayerBaseClient"; |
| |
| // --------------------------------------------------------------------------- |
| |
| Vector<GLuint> LayerBase::deletedTextures; |
| |
| int32_t LayerBase::sIdentity = 0; |
| |
| LayerBase::LayerBase(SurfaceFlinger* flinger, DisplayID display) |
| : dpy(display), contentDirty(false), |
| mFlinger(flinger), |
| mTransformed(false), |
| mOrientation(0), |
| mCanUseCopyBit(false), |
| mTransactionFlags(0), |
| mPremultipliedAlpha(true), |
| mIdentity(uint32_t(android_atomic_inc(&sIdentity))), |
| mInvalidate(0) |
| { |
| const DisplayHardware& hw(flinger->graphicPlane(0).displayHardware()); |
| mFlags = hw.getFlags(); |
| } |
| |
| LayerBase::~LayerBase() |
| { |
| } |
| |
| const GraphicPlane& LayerBase::graphicPlane(int dpy) const |
| { |
| return mFlinger->graphicPlane(dpy); |
| } |
| |
| GraphicPlane& LayerBase::graphicPlane(int dpy) |
| { |
| return mFlinger->graphicPlane(dpy); |
| } |
| |
| void LayerBase::initStates(uint32_t w, uint32_t h, uint32_t flags) |
| { |
| uint32_t layerFlags = 0; |
| if (flags & ISurfaceComposer::eHidden) |
| layerFlags = ISurfaceComposer::eLayerHidden; |
| |
| if (flags & ISurfaceComposer::eNonPremultiplied) |
| mPremultipliedAlpha = false; |
| |
| mCurrentState.z = 0; |
| mCurrentState.w = w; |
| mCurrentState.h = h; |
| mCurrentState.alpha = 0xFF; |
| mCurrentState.flags = layerFlags; |
| mCurrentState.sequence = 0; |
| mCurrentState.transform.set(0, 0); |
| |
| // drawing state & current state are identical |
| mDrawingState = mCurrentState; |
| } |
| |
| void LayerBase::commitTransaction(bool skipSize) { |
| const uint32_t w = mDrawingState.w; |
| const uint32_t h = mDrawingState.h; |
| mDrawingState = mCurrentState; |
| if (skipSize) { |
| mDrawingState.w = w; |
| mDrawingState.h = h; |
| } |
| } |
| void LayerBase::forceVisibilityTransaction() { |
| // this can be called without SurfaceFlinger.mStateLock, but if we |
| // can atomically increment the sequence number, it doesn't matter. |
| android_atomic_inc(&mCurrentState.sequence); |
| requestTransaction(); |
| } |
| bool LayerBase::requestTransaction() { |
| int32_t old = setTransactionFlags(eTransactionNeeded); |
| return ((old & eTransactionNeeded) == 0); |
| } |
| uint32_t LayerBase::getTransactionFlags(uint32_t flags) { |
| return android_atomic_and(~flags, &mTransactionFlags) & flags; |
| } |
| uint32_t LayerBase::setTransactionFlags(uint32_t flags) { |
| return android_atomic_or(flags, &mTransactionFlags); |
| } |
| |
| void LayerBase::setSizeChanged(uint32_t w, uint32_t h) { |
| } |
| |
| bool LayerBase::setPosition(int32_t x, int32_t y) { |
| if (mCurrentState.transform.tx() == x && mCurrentState.transform.ty() == y) |
| return false; |
| mCurrentState.sequence++; |
| mCurrentState.transform.set(x, y); |
| requestTransaction(); |
| return true; |
| } |
| bool LayerBase::setLayer(uint32_t z) { |
| if (mCurrentState.z == z) |
| return false; |
| mCurrentState.sequence++; |
| mCurrentState.z = z; |
| requestTransaction(); |
| return true; |
| } |
| bool LayerBase::setSize(uint32_t w, uint32_t h) { |
| if (mCurrentState.w == w && mCurrentState.h == h) |
| return false; |
| setSizeChanged(w, h); |
| mCurrentState.w = w; |
| mCurrentState.h = h; |
| requestTransaction(); |
| return true; |
| } |
| bool LayerBase::setAlpha(uint8_t alpha) { |
| if (mCurrentState.alpha == alpha) |
| return false; |
| mCurrentState.sequence++; |
| mCurrentState.alpha = alpha; |
| requestTransaction(); |
| return true; |
| } |
| bool LayerBase::setMatrix(const layer_state_t::matrix22_t& matrix) { |
| // TODO: check the matrix has changed |
| mCurrentState.sequence++; |
| mCurrentState.transform.set( |
| matrix.dsdx, matrix.dsdy, matrix.dtdx, matrix.dtdy); |
| requestTransaction(); |
| return true; |
| } |
| bool LayerBase::setTransparentRegionHint(const Region& transparent) { |
| // TODO: check the region has changed |
| mCurrentState.sequence++; |
| mCurrentState.transparentRegion = transparent; |
| requestTransaction(); |
| return true; |
| } |
| bool LayerBase::setFlags(uint8_t flags, uint8_t mask) { |
| const uint32_t newFlags = (mCurrentState.flags & ~mask) | (flags & mask); |
| if (mCurrentState.flags == newFlags) |
| return false; |
| mCurrentState.sequence++; |
| mCurrentState.flags = newFlags; |
| requestTransaction(); |
| return true; |
| } |
| |
| Rect LayerBase::visibleBounds() const |
| { |
| return mTransformedBounds; |
| } |
| |
| void LayerBase::setVisibleRegion(const Region& visibleRegion) { |
| // always called from main thread |
| visibleRegionScreen = visibleRegion; |
| } |
| |
| void LayerBase::setCoveredRegion(const Region& coveredRegion) { |
| // always called from main thread |
| coveredRegionScreen = coveredRegion; |
| } |
| |
| uint32_t LayerBase::doTransaction(uint32_t flags) |
| { |
| const Layer::State& front(drawingState()); |
| const Layer::State& temp(currentState()); |
| |
| if (temp.sequence != front.sequence) { |
| // invalidate and recompute the visible regions if needed |
| flags |= eVisibleRegion; |
| this->contentDirty = true; |
| } |
| |
| // Commit the transaction |
| commitTransaction(flags & eRestartTransaction); |
| return flags; |
| } |
| |
| Point LayerBase::getPhysicalSize() const |
| { |
| const Layer::State& front(drawingState()); |
| return Point(front.w, front.h); |
| } |
| |
| void LayerBase::validateVisibility(const Transform& planeTransform) |
| { |
| const Layer::State& s(drawingState()); |
| const Transform tr(planeTransform * s.transform); |
| const bool transformed = tr.transformed(); |
| |
| const Point size(getPhysicalSize()); |
| uint32_t w = size.x; |
| uint32_t h = size.y; |
| tr.transform(mVertices[0], 0, 0); |
| tr.transform(mVertices[1], 0, h); |
| tr.transform(mVertices[2], w, h); |
| tr.transform(mVertices[3], w, 0); |
| if (UNLIKELY(transformed)) { |
| // NOTE: here we could also punt if we have too many rectangles |
| // in the transparent region |
| if (tr.preserveRects()) { |
| // transform the transparent region |
| transparentRegionScreen = tr.transform(s.transparentRegion); |
| } else { |
| // transformation too complex, can't do the transparent region |
| // optimization. |
| transparentRegionScreen.clear(); |
| } |
| } else { |
| transparentRegionScreen = s.transparentRegion; |
| } |
| |
| // cache a few things... |
| mOrientation = tr.getOrientation(); |
| mTransformedBounds = tr.makeBounds(w, h); |
| mTransformed = transformed; |
| mLeft = tr.tx(); |
| mTop = tr.ty(); |
| |
| // see if we can/should use 2D h/w with the new configuration |
| mCanUseCopyBit = false; |
| copybit_device_t* copybit = mFlinger->getBlitEngine(); |
| if (copybit) { |
| const int step = copybit->get(copybit, COPYBIT_ROTATION_STEP_DEG); |
| const int scaleBits = copybit->get(copybit, COPYBIT_SCALING_FRAC_BITS); |
| mCanUseCopyBit = true; |
| if ((mOrientation < 0) && (step > 1)) { |
| // arbitrary orientations not supported |
| mCanUseCopyBit = false; |
| } else if ((mOrientation > 0) && (step > 90)) { |
| // 90 deg rotations not supported |
| mCanUseCopyBit = false; |
| } else if ((tr.getType() & SkMatrix::kScale_Mask) && (scaleBits < 12)) { |
| // arbitrary scaling not supported |
| mCanUseCopyBit = false; |
| } |
| #if HONOR_PREMULTIPLIED_ALPHA |
| else if (needsBlending() && mPremultipliedAlpha) { |
| // pre-multiplied alpha not supported |
| mCanUseCopyBit = false; |
| } |
| #endif |
| else { |
| // here, we determined we can use copybit |
| if (tr.getType() & SkMatrix::kScale_Mask) { |
| // and we have scaling |
| if (!transparentRegionScreen.isRect()) { |
| // we punt because blending is cheap (h/w) and the region is |
| // complex, which may causes artifacts when copying |
| // scaled content |
| transparentRegionScreen.clear(); |
| } |
| } |
| } |
| } |
| } |
| |
| void LayerBase::lockPageFlip(bool& recomputeVisibleRegions) |
| { |
| } |
| |
| void LayerBase::unlockPageFlip( |
| const Transform& planeTransform, Region& outDirtyRegion) |
| { |
| if ((android_atomic_and(~1, &mInvalidate)&1) == 1) { |
| outDirtyRegion.orSelf(visibleRegionScreen); |
| } |
| } |
| |
| void LayerBase::finishPageFlip() |
| { |
| } |
| |
| void LayerBase::invalidate() |
| { |
| if ((android_atomic_or(1, &mInvalidate)&1) == 0) { |
| mFlinger->signalEvent(); |
| } |
| } |
| |
| void LayerBase::drawRegion(const Region& reg) const |
| { |
| Region::iterator iterator(reg); |
| if (iterator) { |
| Rect r; |
| const DisplayHardware& hw(graphicPlane(0).displayHardware()); |
| const int32_t fbWidth = hw.getWidth(); |
| const int32_t fbHeight = hw.getHeight(); |
| const GLshort vertices[][2] = { { 0, 0 }, { fbWidth, 0 }, |
| { fbWidth, fbHeight }, { 0, fbHeight } }; |
| glVertexPointer(2, GL_SHORT, 0, vertices); |
| while (iterator.iterate(&r)) { |
| const GLint sy = fbHeight - (r.top + r.height()); |
| glScissor(r.left, sy, r.width(), r.height()); |
| glDrawArrays(GL_TRIANGLE_FAN, 0, 4); |
| } |
| } |
| } |
| |
| void LayerBase::draw(const Region& inClip) const |
| { |
| // invalidate the region we'll update |
| Region clip(inClip); // copy-on-write, so no-op most of the time |
| |
| // Remove the transparent area from the clipping region |
| const State& s = drawingState(); |
| if (LIKELY(!s.transparentRegion.isEmpty())) { |
| clip.subtract(transparentRegionScreen); |
| if (clip.isEmpty()) { |
| // usually this won't happen because this should be taken care of |
| // by SurfaceFlinger::computeVisibleRegions() |
| return; |
| } |
| } |
| |
| // reset GL state |
| glEnable(GL_SCISSOR_TEST); |
| |
| onDraw(clip); |
| |
| /* |
| glDisable(GL_TEXTURE_2D); |
| glDisable(GL_DITHER); |
| glEnable(GL_BLEND); |
| glBlendFunc(GL_ONE, GL_ONE_MINUS_SRC_ALPHA); |
| glColor4x(0, 0x8000, 0, 0x10000); |
| drawRegion(transparentRegionScreen); |
| glDisable(GL_BLEND); |
| */ |
| } |
| |
| GLuint LayerBase::createTexture() const |
| { |
| GLuint textureName = -1; |
| glGenTextures(1, &textureName); |
| glBindTexture(GL_TEXTURE_2D, textureName); |
| glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); |
| glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); |
| if (mFlags & DisplayHardware::SLOW_CONFIG) { |
| glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); |
| glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); |
| } else { |
| glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); |
| glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); |
| } |
| return textureName; |
| } |
| |
| void LayerBase::clearWithOpenGL(const Region& clip) const |
| { |
| const DisplayHardware& hw(graphicPlane(0).displayHardware()); |
| const uint32_t fbHeight = hw.getHeight(); |
| glColor4x(0,0,0,0); |
| glDisable(GL_TEXTURE_2D); |
| glDisable(GL_BLEND); |
| glDisable(GL_DITHER); |
| Rect r; |
| Region::iterator iterator(clip); |
| if (iterator) { |
| glEnable(GL_SCISSOR_TEST); |
| glVertexPointer(2, GL_FIXED, 0, mVertices); |
| while (iterator.iterate(&r)) { |
| const GLint sy = fbHeight - (r.top + r.height()); |
| glScissor(r.left, sy, r.width(), r.height()); |
| glDrawArrays(GL_TRIANGLE_FAN, 0, 4); |
| } |
| } |
| } |
| |
| void LayerBase::drawWithOpenGL(const Region& clip, |
| GLint textureName, const GGLSurface& t, int transform) const |
| { |
| const DisplayHardware& hw(graphicPlane(0).displayHardware()); |
| const uint32_t fbHeight = hw.getHeight(); |
| const State& s(drawingState()); |
| |
| // bind our texture |
| validateTexture(textureName); |
| glEnable(GL_TEXTURE_2D); |
| |
| // Dithering... |
| if (s.flags & ISurfaceComposer::eLayerDither) { |
| glEnable(GL_DITHER); |
| } else { |
| glDisable(GL_DITHER); |
| } |
| |
| if (UNLIKELY(s.alpha < 0xFF)) { |
| // We have an alpha-modulation. We need to modulate all |
| // texture components by alpha because we're always using |
| // premultiplied alpha. |
| |
| // If the texture doesn't have an alpha channel we can |
| // use REPLACE and switch to non premultiplied alpha |
| // blending (SRCA/ONE_MINUS_SRCA). |
| |
| GLenum env, src; |
| if (needsBlending()) { |
| env = GL_MODULATE; |
| src = mPremultipliedAlpha ? GL_ONE : GL_SRC_ALPHA; |
| } else { |
| env = GL_REPLACE; |
| src = GL_SRC_ALPHA; |
| } |
| const GGLfixed alpha = (s.alpha << 16)/255; |
| glColor4x(alpha, alpha, alpha, alpha); |
| glEnable(GL_BLEND); |
| glBlendFunc(src, GL_ONE_MINUS_SRC_ALPHA); |
| glTexEnvx(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, env); |
| } else { |
| glTexEnvx(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_REPLACE); |
| glColor4x(0x10000, 0x10000, 0x10000, 0x10000); |
| if (needsBlending()) { |
| GLenum src = mPremultipliedAlpha ? GL_ONE : GL_SRC_ALPHA; |
| glEnable(GL_BLEND); |
| glBlendFunc(src, GL_ONE_MINUS_SRC_ALPHA); |
| } else { |
| glDisable(GL_BLEND); |
| } |
| } |
| |
| if (UNLIKELY(transformed() |
| || !(mFlags & DisplayHardware::DRAW_TEXTURE_EXTENSION) )) |
| { |
| //StopWatch watch("GL transformed"); |
| Region::iterator iterator(clip); |
| if (iterator) { |
| // always use high-quality filtering with fast configurations |
| bool fast = !(mFlags & DisplayHardware::SLOW_CONFIG); |
| if (!fast && s.flags & ISurfaceComposer::eLayerFilter) { |
| glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); |
| glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); |
| } |
| const GLfixed texCoords[4][2] = { |
| { 0, 0 }, |
| { 0, 0x10000 }, |
| { 0x10000, 0x10000 }, |
| { 0x10000, 0 } |
| }; |
| |
| glMatrixMode(GL_TEXTURE); |
| glLoadIdentity(); |
| |
| if (transform == HAL_TRANSFORM_ROT_90) { |
| glTranslatef(0, 1, 0); |
| glRotatef(-90, 0, 0, 1); |
| } |
| |
| if (!(mFlags & DisplayHardware::NPOT_EXTENSION)) { |
| // find the smallest power-of-two that will accommodate our surface |
| GLuint tw = 1 << (31 - clz(t.width)); |
| GLuint th = 1 << (31 - clz(t.height)); |
| if (tw < t.width) tw <<= 1; |
| if (th < t.height) th <<= 1; |
| // this divide should be relatively fast because it's |
| // a power-of-two (optimized path in libgcc) |
| GLfloat ws = GLfloat(t.width) /tw; |
| GLfloat hs = GLfloat(t.height)/th; |
| glScalef(ws, hs, 1.0f); |
| } |
| |
| glEnableClientState(GL_TEXTURE_COORD_ARRAY); |
| glVertexPointer(2, GL_FIXED, 0, mVertices); |
| glTexCoordPointer(2, GL_FIXED, 0, texCoords); |
| |
| Rect r; |
| while (iterator.iterate(&r)) { |
| const GLint sy = fbHeight - (r.top + r.height()); |
| glScissor(r.left, sy, r.width(), r.height()); |
| glDrawArrays(GL_TRIANGLE_FAN, 0, 4); |
| } |
| |
| if (!fast && s.flags & ISurfaceComposer::eLayerFilter) { |
| glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); |
| glTexParameterx(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); |
| } |
| glDisableClientState(GL_TEXTURE_COORD_ARRAY); |
| } |
| } else { |
| Region::iterator iterator(clip); |
| if (iterator) { |
| Rect r; |
| GLint crop[4] = { 0, t.height, t.width, -t.height }; |
| glTexParameteriv(GL_TEXTURE_2D, GL_TEXTURE_CROP_RECT_OES, crop); |
| int x = tx(); |
| int y = ty(); |
| y = fbHeight - (y + t.height); |
| while (iterator.iterate(&r)) { |
| const GLint sy = fbHeight - (r.top + r.height()); |
| glScissor(r.left, sy, r.width(), r.height()); |
| glDrawTexiOES(x, y, 0, t.width, t.height); |
| } |
| } |
| } |
| } |
| |
| void LayerBase::validateTexture(GLint textureName) const |
| { |
| glBindTexture(GL_TEXTURE_2D, textureName); |
| // TODO: reload the texture if needed |
| // this is currently done in loadTexture() below |
| } |
| |
| void LayerBase::loadTexture(const Region& dirty, |
| GLint textureName, const GGLSurface& t, |
| GLuint& textureWidth, GLuint& textureHeight) const |
| { |
| // TODO: defer the actual texture reload until LayerBase::validateTexture |
| // is called. |
| |
| uint32_t flags = mFlags; |
| glBindTexture(GL_TEXTURE_2D, textureName); |
| |
| GLuint tw = t.width; |
| GLuint th = t.height; |
| |
| /* |
| * In OpenGL ES we can't specify a stride with glTexImage2D (however, |
| * GL_UNPACK_ALIGNMENT is 4, which in essence allows a limited form of |
| * stride). |
| * So if the stride here isn't representable with GL_UNPACK_ALIGNMENT, we |
| * need to do something reasonable (here creating a bigger texture). |
| * |
| * extra pixels = (((stride - width) * pixelsize) / GL_UNPACK_ALIGNMENT); |
| * |
| * This situation doesn't happen often, but some h/w have a limitation |
| * for their framebuffer (eg: must be multiple of 8 pixels), and |
| * we need to take that into account when using these buffers as |
| * textures. |
| * |
| * This should never be a problem with POT textures |
| */ |
| |
| tw += (((t.stride - tw) * bytesPerPixel(t.format)) / 4); |
| |
| /* |
| * round to POT if needed |
| */ |
| |
| GLuint texture_w = tw; |
| GLuint texture_h = th; |
| if (!(flags & DisplayHardware::NPOT_EXTENSION)) { |
| // find the smallest power-of-two that will accommodate our surface |
| texture_w = 1 << (31 - clz(t.width)); |
| texture_h = 1 << (31 - clz(t.height)); |
| if (texture_w < t.width) texture_w <<= 1; |
| if (texture_h < t.height) texture_h <<= 1; |
| if (texture_w != tw || texture_h != th) { |
| // we can't use DIRECT_TEXTURE since we changed the size |
| // of the texture |
| flags &= ~DisplayHardware::DIRECT_TEXTURE; |
| } |
| } |
| |
| if (flags & DisplayHardware::DIRECT_TEXTURE) { |
| // here we're guaranteed that texture_{w|h} == t{w|h} |
| if (t.format == GGL_PIXEL_FORMAT_RGB_565) { |
| glTexImage2D(GL_DIRECT_TEXTURE_2D_QUALCOMM, 0, |
| GL_RGB, tw, th, 0, |
| GL_RGB, GL_UNSIGNED_SHORT_5_6_5, t.data); |
| } else if (t.format == GGL_PIXEL_FORMAT_RGBA_4444) { |
| glTexImage2D(GL_DIRECT_TEXTURE_2D_QUALCOMM, 0, |
| GL_RGBA, tw, th, 0, |
| GL_RGBA, GL_UNSIGNED_SHORT_4_4_4_4, t.data); |
| } else if (t.format == GGL_PIXEL_FORMAT_RGBA_8888) { |
| glTexImage2D(GL_DIRECT_TEXTURE_2D_QUALCOMM, 0, |
| GL_RGBA, tw, th, 0, |
| GL_RGBA, GL_UNSIGNED_BYTE, t.data); |
| } else if (t.format == GGL_PIXEL_FORMAT_BGRA_8888) { |
| // TODO: add GL_BGRA extension |
| } else { |
| // oops, we don't handle this format, try the regular path |
| goto regular; |
| } |
| textureWidth = tw; |
| textureHeight = th; |
| } else { |
| regular: |
| Rect bounds(dirty.bounds()); |
| GLvoid* data = 0; |
| if (texture_w!=textureWidth || texture_h!=textureHeight) { |
| // texture size changed, we need to create a new one |
| |
| if (!textureWidth || !textureHeight) { |
| // this is the first time, load the whole texture |
| if (texture_w==tw && texture_h==th) { |
| // we can do it one pass |
| data = t.data; |
| } else { |
| // we have to create the texture first because it |
| // doesn't match the size of the buffer |
| bounds.set(Rect(tw, th)); |
| } |
| } |
| |
| if (t.format == GGL_PIXEL_FORMAT_RGB_565) { |
| glTexImage2D(GL_TEXTURE_2D, 0, |
| GL_RGB, texture_w, texture_h, 0, |
| GL_RGB, GL_UNSIGNED_SHORT_5_6_5, data); |
| } else if (t.format == GGL_PIXEL_FORMAT_RGBA_4444) { |
| glTexImage2D(GL_TEXTURE_2D, 0, |
| GL_RGBA, texture_w, texture_h, 0, |
| GL_RGBA, GL_UNSIGNED_SHORT_4_4_4_4, data); |
| } else if (t.format == GGL_PIXEL_FORMAT_RGBA_8888) { |
| glTexImage2D(GL_TEXTURE_2D, 0, |
| GL_RGBA, texture_w, texture_h, 0, |
| GL_RGBA, GL_UNSIGNED_BYTE, data); |
| } else if ( t.format == GGL_PIXEL_FORMAT_YCbCr_422_SP || |
| t.format == GGL_PIXEL_FORMAT_YCbCr_420_SP) { |
| // just show the Y plane of YUV buffers |
| data = t.data; |
| glTexImage2D(GL_TEXTURE_2D, 0, |
| GL_LUMINANCE, texture_w, texture_h, 0, |
| GL_LUMINANCE, GL_UNSIGNED_BYTE, data); |
| } else { |
| // oops, we don't handle this format! |
| LOGE("layer %p, texture=%d, using format %d, which is not " |
| "supported by the GL", this, textureName, t.format); |
| textureName = -1; |
| } |
| textureWidth = texture_w; |
| textureHeight = texture_h; |
| } |
| if (!data && textureName>=0) { |
| if (t.format == GGL_PIXEL_FORMAT_RGB_565) { |
| glTexSubImage2D(GL_TEXTURE_2D, 0, |
| 0, bounds.top, t.width, bounds.height(), |
| GL_RGB, GL_UNSIGNED_SHORT_5_6_5, |
| t.data + bounds.top*t.width*2); |
| } else if (t.format == GGL_PIXEL_FORMAT_RGBA_4444) { |
| glTexSubImage2D(GL_TEXTURE_2D, 0, |
| 0, bounds.top, t.width, bounds.height(), |
| GL_RGBA, GL_UNSIGNED_SHORT_4_4_4_4, |
| t.data + bounds.top*t.width*2); |
| } else if (t.format == GGL_PIXEL_FORMAT_RGBA_8888) { |
| glTexSubImage2D(GL_TEXTURE_2D, 0, |
| 0, bounds.top, t.width, bounds.height(), |
| GL_RGBA, GL_UNSIGNED_BYTE, |
| t.data + bounds.top*t.width*4); |
| } |
| } |
| } |
| } |
| |
| bool LayerBase::canUseCopybit() const |
| { |
| return mCanUseCopyBit; |
| } |
| |
| // --------------------------------------------------------------------------- |
| |
| LayerBaseClient::LayerBaseClient(SurfaceFlinger* flinger, DisplayID display, |
| Client* c, int32_t i) |
| : LayerBase(flinger, display), client(c), |
| lcblk( c ? &(c->ctrlblk->layers[i]) : 0 ), |
| mIndex(i) |
| { |
| if (client) { |
| client->bindLayer(this, i); |
| |
| // Initialize this layer's control block |
| memset(this->lcblk, 0, sizeof(layer_cblk_t)); |
| this->lcblk->identity = mIdentity; |
| Region::writeEmpty(&(this->lcblk->region[0]), sizeof(flat_region_t)); |
| Region::writeEmpty(&(this->lcblk->region[1]), sizeof(flat_region_t)); |
| } |
| } |
| |
| LayerBaseClient::~LayerBaseClient() |
| { |
| if (client) { |
| client->free(mIndex); |
| } |
| } |
| |
| int32_t LayerBaseClient::serverIndex() const { |
| if (client) { |
| return (client->cid<<16)|mIndex; |
| } |
| return 0xFFFF0000 | mIndex; |
| } |
| |
| sp<LayerBaseClient::Surface> LayerBaseClient::getSurface() const |
| { |
| return new Surface(clientIndex(), mIdentity); |
| } |
| |
| |
| // --------------------------------------------------------------------------- |
| |
| }; // namespace android |