include/ui/EventHub.h - platform/frameworks/base - Gitiles

 /*
  * Copyright (C) 2005 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 //
 #ifndef _RUNTIME_EVENT_HUB_H
 #define _RUNTIME_EVENT_HUB_H

 #include <android/input.h>
 #include <utils/String8.h>
 #include <utils/threads.h>
 #include <utils/Log.h>
 #include <utils/threads.h>
 #include <utils/List.h>
 #include <utils/Errors.h>

 #include <linux/input.h>

 /* These constants are not defined in linux/input.h but they are part of the multitouch
  * input protocol. */

 #define ABS_MT_TOUCH_MAJOR 0x30  /* Major axis of touching ellipse */
 #define ABS_MT_TOUCH_MINOR 0x31  /* Minor axis (omit if circular) */
 #define ABS_MT_WIDTH_MAJOR 0x32  /* Major axis of approaching ellipse */
 #define ABS_MT_WIDTH_MINOR 0x33  /* Minor axis (omit if circular) */
 #define ABS_MT_ORIENTATION 0x34  /* Ellipse orientation */
 #define ABS_MT_POSITION_X 0x35   /* Center X ellipse position */
 #define ABS_MT_POSITION_Y 0x36   /* Center Y ellipse position */
 #define ABS_MT_TOOL_TYPE 0x37    /* Type of touching device (finger, pen, ...) */
 #define ABS_MT_BLOB_ID 0x38      /* Group a set of packets as a blob */
 #define ABS_MT_TRACKING_ID 0x39  /* Unique ID of initiated contact */
 #define ABS_MT_PRESSURE 0x3a     /* Pressure on contact area */

 #define MT_TOOL_FINGER 0 /* Identifies a finger */
 #define MT_TOOL_PEN 1    /* Identifies a pen */

 #define SYN_MT_REPORT 2

 /* Convenience constants. */

 #define BTN_FIRST 0x100  // first button scancode
 #define BTN_LAST 0x15f   // last button scancode

 struct pollfd;

 namespace android {

 class KeyLayoutMap;

 /*
  * Input device classes.
  */
 enum {
     /* The input device is a keyboard. */
     INPUT_DEVICE_CLASS_KEYBOARD      = 0x00000001,

     /* The input device is an alpha-numeric keyboard (not just a dial pad). */
     INPUT_DEVICE_CLASS_ALPHAKEY      = 0x00000002,

     /* The input device is a touchscreen (either single-touch or multi-touch). */
     INPUT_DEVICE_CLASS_TOUCHSCREEN   = 0x00000004,

     /* The input device is a trackball. */
     INPUT_DEVICE_CLASS_TRACKBALL     = 0x00000008,

     /* The input device is a multi-touch touchscreen. */
     INPUT_DEVICE_CLASS_TOUCHSCREEN_MT= 0x00000010,

     /* The input device is a directional pad. */
     INPUT_DEVICE_CLASS_DPAD          = 0x00000020,

     /* The input device is a gamepad (implies keyboard). */
     INPUT_DEVICE_CLASS_GAMEPAD       = 0x00000040
 };

 /*
  * Grand Central Station for events.
  *
  * The event hub aggregates input events received across all known input
  * devices on the system, including devices that may be emulated by the simulator
  * environment.  In addition, the event hub generates fake input events to indicate
  * when devices are added or removed.
  *
  * The event hub provies a stream of input events (via the getEvent function).
  * It also supports querying the current actual state of input devices such as identifying
  * which keys are currently down.  Finally, the event hub keeps track of the capabilities of
  * individual input devices, such as their class and the set of key codes that they support.
  */
 class EventHubInterface : public virtual RefBase {
 protected:
     EventHubInterface() { }
     virtual ~EventHubInterface() { }

 public:
     // Synthetic raw event type codes produced when devices are added or removed.
     enum {
         DEVICE_ADDED = 0x10000000,
         DEVICE_REMOVED = 0x20000000
     };

     virtual uint32_t getDeviceClasses(int32_t deviceId) const = 0;

     virtual String8 getDeviceName(int32_t deviceId) const = 0;

     virtual int getAbsoluteInfo(int32_t deviceId, int axis, int *outMinValue,
             int* outMaxValue, int* outFlat, int* outFuzz) const = 0;

     virtual status_t scancodeToKeycode(int32_t deviceId, int scancode,
             int32_t* outKeycode, uint32_t* outFlags) const = 0;

     // exclude a particular device from opening
     // this can be used to ignore input devices for sensors
     virtual void addExcludedDevice(const char* deviceName) = 0;

     /*
      * Wait for the next event to become available and return it.
      * After returning, the EventHub holds onto a wake lock until the next call to getEvent.
      * This ensures that the device will not go to sleep while the event is being processed.
      * If the device needs to remain awake longer than that, then the caller is responsible
      * for taking care of it (say, by poking the power manager user activity timer).
      */
     virtual bool getEvent(int32_t* outDeviceId, int32_t* outType,
             int32_t* outScancode, int32_t* outKeycode, uint32_t *outFlags,
             int32_t* outValue, nsecs_t* outWhen) = 0;

     /*
      * Query current input state.
      *   deviceId may be -1 to search for the device automatically, filtered by class.
      *   deviceClasses may be -1 to ignore device class while searching.
      */
     virtual int32_t getScanCodeState(int32_t deviceId, int32_t deviceClasses,
             int32_t scanCode) const = 0;
     virtual int32_t getKeyCodeState(int32_t deviceId, int32_t deviceClasses,
             int32_t keyCode) const = 0;
     virtual int32_t getSwitchState(int32_t deviceId, int32_t deviceClasses,
             int32_t sw) const = 0;

     /*
      * Examine key input devices for specific framework keycode support
      */
     virtual bool hasKeys(size_t numCodes, const int32_t* keyCodes,
             uint8_t* outFlags) const = 0;
 };

 class EventHub : public EventHubInterface
 {
 public:
     EventHub();

     status_t errorCheck() const;

     virtual uint32_t getDeviceClasses(int32_t deviceId) const;

     virtual String8 getDeviceName(int32_t deviceId) const;

     virtual int getAbsoluteInfo(int32_t deviceId, int axis, int *outMinValue,
             int* outMaxValue, int* outFlat, int* outFuzz) const;

     virtual status_t scancodeToKeycode(int32_t deviceId, int scancode,
             int32_t* outKeycode, uint32_t* outFlags) const;

     virtual void addExcludedDevice(const char* deviceName);

     virtual int32_t getScanCodeState(int32_t deviceId, int32_t deviceClasses,
             int32_t scanCode) const;
     virtual int32_t getKeyCodeState(int32_t deviceId, int32_t deviceClasses,
             int32_t keyCode) const;
     virtual int32_t getSwitchState(int32_t deviceId, int32_t deviceClasses,
             int32_t sw) const;

     virtual bool hasKeys(size_t numCodes, const int32_t* keyCodes, uint8_t* outFlags) const;

     virtual bool getEvent(int32_t* outDeviceId, int32_t* outType,
             int32_t* outScancode, int32_t* outKeycode, uint32_t *outFlags,
             int32_t* outValue, nsecs_t* outWhen);

 protected:
     virtual ~EventHub();

 private:
     bool openPlatformInput(void);
     int32_t convertDeviceKey_TI_P2(int code);

     int open_device(const char *device);
     int close_device(const char *device);
     int scan_dir(const char *dirname);
     int read_notify(int nfd);

     status_t mError;

     struct device_t {
         const int32_t   id;
         const String8   path;
         String8         name;
         uint32_t        classes;
         uint8_t*        keyBitmask;
         KeyLayoutMap*   layoutMap;
         String8         keylayoutFilename;
         device_t*       next;

         device_t(int32_t _id, const char* _path, const char* name);
         ~device_t();
     };

     device_t* getDevice(int32_t deviceId) const;
     bool hasKeycode(device_t* device, int keycode) const;

     int32_t getScanCodeStateLocked(device_t* device, int32_t scanCode) const;
     int32_t getKeyCodeStateLocked(device_t* device, int32_t keyCode) const;
     int32_t getSwitchStateLocked(device_t* device, int32_t sw) const;

     // Protect all internal state.
     mutable Mutex   mLock;

     bool            mHaveFirstKeyboard;
     int32_t         mFirstKeyboardId; // the API is that the built-in keyboard is id 0, so map it

     struct device_ent {
         device_t* device;
         uint32_t seq;
     };
     device_ent      *mDevicesById;
     int             mNumDevicesById;

     device_t        *mOpeningDevices;
     device_t        *mClosingDevices;

     device_t        **mDevices;
     struct pollfd   *mFDs;
     int             mFDCount;

     bool            mOpened;
     List<String8>   mExcludedDevices;

     // device ids that report particular switches.
 #ifdef EV_SW
     int32_t         mSwitches[SW_MAX + 1];
 #endif
 };

 }; // namespace android

 #endif // _RUNTIME_EVENT_HUB_H
	/*
	* Copyright (C) 2005 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	//
	#ifndef _RUNTIME_EVENT_HUB_H
	#define _RUNTIME_EVENT_HUB_H

	#include <android/input.h>
	#include <utils/String8.h>
	#include <utils/threads.h>
	#include <utils/Log.h>
	#include <utils/threads.h>
	#include <utils/List.h>
	#include <utils/Errors.h>

	#include <linux/input.h>

	/* These constants are not defined in linux/input.h but they are part of the multitouch
	* input protocol. */

	#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
	#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
	#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
	#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
	#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
	#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */
	#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */
	#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device (finger, pen, ...) */
	#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
	#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
	#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */

	#define MT_TOOL_FINGER 0 /* Identifies a finger */
	#define MT_TOOL_PEN 1 /* Identifies a pen */

	#define SYN_MT_REPORT 2

	/* Convenience constants. */

	#define BTN_FIRST 0x100 // first button scancode
	#define BTN_LAST 0x15f // last button scancode

	struct pollfd;

	namespace android {

	class KeyLayoutMap;

	/*
	* Input device classes.
	*/
	enum {
	/* The input device is a keyboard. */
	INPUT_DEVICE_CLASS_KEYBOARD = 0x00000001,

	/* The input device is an alpha-numeric keyboard (not just a dial pad). */
	INPUT_DEVICE_CLASS_ALPHAKEY = 0x00000002,

	/* The input device is a touchscreen (either single-touch or multi-touch). */
	INPUT_DEVICE_CLASS_TOUCHSCREEN = 0x00000004,

	/* The input device is a trackball. */
	INPUT_DEVICE_CLASS_TRACKBALL = 0x00000008,

	/* The input device is a multi-touch touchscreen. */
	INPUT_DEVICE_CLASS_TOUCHSCREEN_MT= 0x00000010,

	/* The input device is a directional pad. */
	INPUT_DEVICE_CLASS_DPAD = 0x00000020,

	/* The input device is a gamepad (implies keyboard). */
	INPUT_DEVICE_CLASS_GAMEPAD = 0x00000040
	};

	/*
	* Grand Central Station for events.
	*
	* The event hub aggregates input events received across all known input
	* devices on the system, including devices that may be emulated by the simulator
	* environment. In addition, the event hub generates fake input events to indicate
	* when devices are added or removed.
	*
	* The event hub provies a stream of input events (via the getEvent function).
	* It also supports querying the current actual state of input devices such as identifying
	* which keys are currently down. Finally, the event hub keeps track of the capabilities of
	* individual input devices, such as their class and the set of key codes that they support.
	*/
	class EventHubInterface : public virtual RefBase {
	protected:
	EventHubInterface() { }
	virtual ~EventHubInterface() { }

	public:
	// Synthetic raw event type codes produced when devices are added or removed.
	enum {
	DEVICE_ADDED = 0x10000000,
	DEVICE_REMOVED = 0x20000000
	};

	virtual uint32_t getDeviceClasses(int32_t deviceId) const = 0;

	virtual String8 getDeviceName(int32_t deviceId) const = 0;

	virtual int getAbsoluteInfo(int32_t deviceId, int axis, int *outMinValue,
	int* outMaxValue, int* outFlat, int* outFuzz) const = 0;

	virtual status_t scancodeToKeycode(int32_t deviceId, int scancode,
	int32_t* outKeycode, uint32_t* outFlags) const = 0;

	// exclude a particular device from opening
	// this can be used to ignore input devices for sensors
	virtual void addExcludedDevice(const char* deviceName) = 0;

	/*
	* Wait for the next event to become available and return it.
	* After returning, the EventHub holds onto a wake lock until the next call to getEvent.
	* This ensures that the device will not go to sleep while the event is being processed.
	* If the device needs to remain awake longer than that, then the caller is responsible
	* for taking care of it (say, by poking the power manager user activity timer).
	*/
	virtual bool getEvent(int32_t* outDeviceId, int32_t* outType,
	int32_t* outScancode, int32_t* outKeycode, uint32_t *outFlags,
	int32_t* outValue, nsecs_t* outWhen) = 0;

	/*
	* Query current input state.
	* deviceId may be -1 to search for the device automatically, filtered by class.
	* deviceClasses may be -1 to ignore device class while searching.
	*/
	virtual int32_t getScanCodeState(int32_t deviceId, int32_t deviceClasses,
	int32_t scanCode) const = 0;
	virtual int32_t getKeyCodeState(int32_t deviceId, int32_t deviceClasses,
	int32_t keyCode) const = 0;
	virtual int32_t getSwitchState(int32_t deviceId, int32_t deviceClasses,
	int32_t sw) const = 0;

	/*
	* Examine key input devices for specific framework keycode support
	*/
	virtual bool hasKeys(size_t numCodes, const int32_t* keyCodes,
	uint8_t* outFlags) const = 0;
	};

	class EventHub : public EventHubInterface
	{
	public:
	EventHub();

	status_t errorCheck() const;

	virtual uint32_t getDeviceClasses(int32_t deviceId) const;

	virtual String8 getDeviceName(int32_t deviceId) const;

	virtual int getAbsoluteInfo(int32_t deviceId, int axis, int *outMinValue,
	int* outMaxValue, int* outFlat, int* outFuzz) const;

	virtual status_t scancodeToKeycode(int32_t deviceId, int scancode,
	int32_t* outKeycode, uint32_t* outFlags) const;

	virtual void addExcludedDevice(const char* deviceName);

	virtual int32_t getScanCodeState(int32_t deviceId, int32_t deviceClasses,
	int32_t scanCode) const;
	virtual int32_t getKeyCodeState(int32_t deviceId, int32_t deviceClasses,
	int32_t keyCode) const;
	virtual int32_t getSwitchState(int32_t deviceId, int32_t deviceClasses,
	int32_t sw) const;

	virtual bool hasKeys(size_t numCodes, const int32_t* keyCodes, uint8_t* outFlags) const;

	virtual bool getEvent(int32_t* outDeviceId, int32_t* outType,
	int32_t* outScancode, int32_t* outKeycode, uint32_t *outFlags,
	int32_t* outValue, nsecs_t* outWhen);

	protected:
	virtual ~EventHub();

	private:
	bool openPlatformInput(void);
	int32_t convertDeviceKey_TI_P2(int code);

	int open_device(const char *device);
	int close_device(const char *device);
	int scan_dir(const char *dirname);
	int read_notify(int nfd);

	status_t mError;

	struct device_t {
	const int32_t id;
	const String8 path;
	String8 name;
	uint32_t classes;
	uint8_t* keyBitmask;
	KeyLayoutMap* layoutMap;
	String8 keylayoutFilename;
	device_t* next;

	device_t(int32_t _id, const char* _path, const char* name);
	~device_t();
	};

	device_t* getDevice(int32_t deviceId) const;
	bool hasKeycode(device_t* device, int keycode) const;

	int32_t getScanCodeStateLocked(device_t* device, int32_t scanCode) const;
	int32_t getKeyCodeStateLocked(device_t* device, int32_t keyCode) const;
	int32_t getSwitchStateLocked(device_t* device, int32_t sw) const;

	// Protect all internal state.
	mutable Mutex mLock;

	bool mHaveFirstKeyboard;
	int32_t mFirstKeyboardId; // the API is that the built-in keyboard is id 0, so map it

	struct device_ent {
	device_t* device;
	uint32_t seq;
	};
	device_ent *mDevicesById;
	int mNumDevicesById;

	device_t *mOpeningDevices;
	device_t *mClosingDevices;

	device_t **mDevices;
	struct pollfd *mFDs;
	int mFDCount;

	bool mOpened;
	List<String8> mExcludedDevices;

	// device ids that report particular switches.
	#ifdef EV_SW
	int32_t mSwitches[SW_MAX + 1];
	#endif
	};

	}; // namespace android

	#endif // _RUNTIME_EVENT_HUB_H