| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.text; |
| |
| import android.annotation.FloatRange; |
| import android.annotation.IntRange; |
| import android.annotation.NonNull; |
| import android.annotation.Nullable; |
| import android.graphics.Paint; |
| import android.text.AutoGrowArray.ByteArray; |
| import android.text.AutoGrowArray.FloatArray; |
| import android.text.AutoGrowArray.IntArray; |
| import android.text.Layout.Directions; |
| import android.text.style.MetricAffectingSpan; |
| import android.text.style.ReplacementSpan; |
| import android.util.Pools.SynchronizedPool; |
| |
| import dalvik.annotation.optimization.CriticalNative; |
| |
| import libcore.util.NativeAllocationRegistry; |
| |
| import java.util.Arrays; |
| |
| /** |
| * MeasuredParagraph provides text information for rendering purpose. |
| * |
| * The first motivation of this class is identify the text directions and retrieving individual |
| * character widths. However retrieving character widths is slower than identifying text directions. |
| * Thus, this class provides several builder methods for specific purposes. |
| * |
| * - buildForBidi: |
| * Compute only text directions. |
| * - buildForMeasurement: |
| * Compute text direction and all character widths. |
| * - buildForStaticLayout: |
| * This is bit special. StaticLayout also needs to know text direction and character widths for |
| * line breaking, but all things are done in native code. Similarly, text measurement is done |
| * in native code. So instead of storing result to Java array, this keeps the result in native |
| * code since there is no good reason to move the results to Java layer. |
| * |
| * In addition to the character widths, some additional information is computed for each purposes, |
| * e.g. whole text length for measurement or font metrics for static layout. |
| * |
| * MeasuredParagraph is NOT a thread safe object. |
| * @hide |
| */ |
| public class MeasuredParagraph { |
| private static final char OBJECT_REPLACEMENT_CHARACTER = '\uFFFC'; |
| |
| private static final NativeAllocationRegistry sRegistry = new NativeAllocationRegistry( |
| MeasuredParagraph.class.getClassLoader(), nGetReleaseFunc(), 1024); |
| |
| private MeasuredParagraph() {} // Use build static functions instead. |
| |
| private static final SynchronizedPool<MeasuredParagraph> sPool = new SynchronizedPool<>(1); |
| |
| private static @NonNull MeasuredParagraph obtain() { // Use build static functions instead. |
| final MeasuredParagraph mt = sPool.acquire(); |
| return mt != null ? mt : new MeasuredParagraph(); |
| } |
| |
| /** |
| * Recycle the MeasuredParagraph. |
| * |
| * Do not call any methods after you call this method. |
| */ |
| public void recycle() { |
| release(); |
| sPool.release(this); |
| } |
| |
| // The casted original text. |
| // |
| // This may be null if the passed text is not a Spanned. |
| private @Nullable Spanned mSpanned; |
| |
| // The start offset of the target range in the original text (mSpanned); |
| private @IntRange(from = 0) int mTextStart; |
| |
| // The length of the target range in the original text. |
| private @IntRange(from = 0) int mTextLength; |
| |
| // The copied character buffer for measuring text. |
| // |
| // The length of this array is mTextLength. |
| private @Nullable char[] mCopiedBuffer; |
| |
| // The whole paragraph direction. |
| private @Layout.Direction int mParaDir; |
| |
| // True if the text is LTR direction and doesn't contain any bidi characters. |
| private boolean mLtrWithoutBidi; |
| |
| // The bidi level for individual characters. |
| // |
| // This is empty if mLtrWithoutBidi is true. |
| private @NonNull ByteArray mLevels = new ByteArray(); |
| |
| // The whole width of the text. |
| // See getWholeWidth comments. |
| private @FloatRange(from = 0.0f) float mWholeWidth; |
| |
| // Individual characters' widths. |
| // See getWidths comments. |
| private @Nullable FloatArray mWidths = new FloatArray(); |
| |
| // The span end positions. |
| // See getSpanEndCache comments. |
| private @Nullable IntArray mSpanEndCache = new IntArray(4); |
| |
| // The font metrics. |
| // See getFontMetrics comments. |
| private @Nullable IntArray mFontMetrics = new IntArray(4 * 4); |
| |
| // The native MeasuredParagraph. |
| // See getNativePtr comments. |
| // Do not modify these members directly. Use bindNativeObject/unbindNativeObject instead. |
| private /* Maybe Zero */ long mNativePtr = 0; |
| private @Nullable Runnable mNativeObjectCleaner; |
| |
| // Associate the native object to this Java object. |
| private void bindNativeObject(/* Non Zero*/ long nativePtr) { |
| mNativePtr = nativePtr; |
| mNativeObjectCleaner = sRegistry.registerNativeAllocation(this, nativePtr); |
| } |
| |
| // Decouple the native object from this Java object and release the native object. |
| private void unbindNativeObject() { |
| if (mNativePtr != 0) { |
| mNativeObjectCleaner.run(); |
| mNativePtr = 0; |
| } |
| } |
| |
| // Following two objects are for avoiding object allocation. |
| private @NonNull TextPaint mCachedPaint = new TextPaint(); |
| private @Nullable Paint.FontMetricsInt mCachedFm; |
| |
| /** |
| * Releases internal buffers. |
| */ |
| public void release() { |
| reset(); |
| mLevels.clearWithReleasingLargeArray(); |
| mWidths.clearWithReleasingLargeArray(); |
| mFontMetrics.clearWithReleasingLargeArray(); |
| mSpanEndCache.clearWithReleasingLargeArray(); |
| } |
| |
| /** |
| * Resets the internal state for starting new text. |
| */ |
| private void reset() { |
| mSpanned = null; |
| mCopiedBuffer = null; |
| mWholeWidth = 0; |
| mLevels.clear(); |
| mWidths.clear(); |
| mFontMetrics.clear(); |
| mSpanEndCache.clear(); |
| unbindNativeObject(); |
| } |
| |
| /** |
| * Returns the characters to be measured. |
| * |
| * This is always available. |
| */ |
| public @NonNull char[] getChars() { |
| return mCopiedBuffer; |
| } |
| |
| /** |
| * Returns the paragraph direction. |
| * |
| * This is always available. |
| */ |
| public @Layout.Direction int getParagraphDir() { |
| return mParaDir; |
| } |
| |
| /** |
| * Returns the directions. |
| * |
| * This is always available. |
| */ |
| public Directions getDirections(@IntRange(from = 0) int start, // inclusive |
| @IntRange(from = 0) int end) { // exclusive |
| if (mLtrWithoutBidi) { |
| return Layout.DIRS_ALL_LEFT_TO_RIGHT; |
| } |
| |
| final int length = end - start; |
| return AndroidBidi.directions(mParaDir, mLevels.getRawArray(), start, mCopiedBuffer, start, |
| length); |
| } |
| |
| /** |
| * Returns the whole text width. |
| * |
| * This is available only if the MeasureText is computed with computeForMeasurement. |
| * Returns 0 in other cases. |
| */ |
| public @FloatRange(from = 0.0f) float getWholeWidth() { |
| return mWholeWidth; |
| } |
| |
| /** |
| * Returns the individual character's width. |
| * |
| * This is available only if the MeasureText is computed with computeForMeasurement. |
| * Returns empty array in other cases. |
| */ |
| public @NonNull FloatArray getWidths() { |
| return mWidths; |
| } |
| |
| /** |
| * Returns the MetricsAffectingSpan end indices. |
| * |
| * If the input text is not a spanned string, this has one value that is the length of the text. |
| * |
| * This is available only if the MeasureText is computed with computeForStaticLayout. |
| * Returns empty array in other cases. |
| */ |
| public @NonNull IntArray getSpanEndCache() { |
| return mSpanEndCache; |
| } |
| |
| /** |
| * Returns the int array which holds FontMetrics. |
| * |
| * This array holds the repeat of top, bottom, ascent, descent of font metrics value. |
| * |
| * This is available only if the MeasureText is computed with computeForStaticLayout. |
| * Returns empty array in other cases. |
| */ |
| public @NonNull IntArray getFontMetrics() { |
| return mFontMetrics; |
| } |
| |
| /** |
| * Returns the native ptr of the MeasuredParagraph. |
| * |
| * This is available only if the MeasureText is computed with computeForStaticLayout. |
| * Returns 0 in other cases. |
| */ |
| public /* Maybe Zero */ long getNativePtr() { |
| return mNativePtr; |
| } |
| |
| /** |
| * Generates new MeasuredParagraph for Bidi computation. |
| * |
| * If recycle is null, this returns new instance. If recycle is not null, this fills computed |
| * result to recycle and returns recycle. |
| * |
| * @param text the character sequence to be measured |
| * @param start the inclusive start offset of the target region in the text |
| * @param end the exclusive end offset of the target region in the text |
| * @param textDir the text direction |
| * @param recycle pass existing MeasuredParagraph if you want to recycle it. |
| * |
| * @return measured text |
| */ |
| public static @NonNull MeasuredParagraph buildForBidi(@NonNull CharSequence text, |
| @IntRange(from = 0) int start, |
| @IntRange(from = 0) int end, |
| @NonNull TextDirectionHeuristic textDir, |
| @Nullable MeasuredParagraph recycle) { |
| final MeasuredParagraph mt = recycle == null ? obtain() : recycle; |
| mt.resetAndAnalyzeBidi(text, start, end, textDir); |
| return mt; |
| } |
| |
| /** |
| * Generates new MeasuredParagraph for measuring texts. |
| * |
| * If recycle is null, this returns new instance. If recycle is not null, this fills computed |
| * result to recycle and returns recycle. |
| * |
| * @param paint the paint to be used for rendering the text. |
| * @param text the character sequence to be measured |
| * @param start the inclusive start offset of the target region in the text |
| * @param end the exclusive end offset of the target region in the text |
| * @param textDir the text direction |
| * @param recycle pass existing MeasuredParagraph if you want to recycle it. |
| * |
| * @return measured text |
| */ |
| public static @NonNull MeasuredParagraph buildForMeasurement(@NonNull TextPaint paint, |
| @NonNull CharSequence text, |
| @IntRange(from = 0) int start, |
| @IntRange(from = 0) int end, |
| @NonNull TextDirectionHeuristic textDir, |
| @Nullable MeasuredParagraph recycle) { |
| final MeasuredParagraph mt = recycle == null ? obtain() : recycle; |
| mt.resetAndAnalyzeBidi(text, start, end, textDir); |
| |
| mt.mWidths.resize(mt.mTextLength); |
| if (mt.mTextLength == 0) { |
| return mt; |
| } |
| |
| if (mt.mSpanned == null) { |
| // No style change by MetricsAffectingSpan. Just measure all text. |
| mt.applyMetricsAffectingSpan( |
| paint, null /* spans */, start, end, 0 /* native static layout ptr */); |
| } else { |
| // There may be a MetricsAffectingSpan. Split into span transitions and apply styles. |
| int spanEnd; |
| for (int spanStart = start; spanStart < end; spanStart = spanEnd) { |
| spanEnd = mt.mSpanned.nextSpanTransition(spanStart, end, MetricAffectingSpan.class); |
| MetricAffectingSpan[] spans = mt.mSpanned.getSpans(spanStart, spanEnd, |
| MetricAffectingSpan.class); |
| spans = TextUtils.removeEmptySpans(spans, mt.mSpanned, MetricAffectingSpan.class); |
| mt.applyMetricsAffectingSpan( |
| paint, spans, spanStart, spanEnd, 0 /* native static layout ptr */); |
| } |
| } |
| return mt; |
| } |
| |
| /** |
| * Generates new MeasuredParagraph for StaticLayout. |
| * |
| * If recycle is null, this returns new instance. If recycle is not null, this fills computed |
| * result to recycle and returns recycle. |
| * |
| * @param paint the paint to be used for rendering the text. |
| * @param text the character sequence to be measured |
| * @param start the inclusive start offset of the target region in the text |
| * @param end the exclusive end offset of the target region in the text |
| * @param textDir the text direction |
| * @param recycle pass existing MeasuredParagraph if you want to recycle it. |
| * |
| * @return measured text |
| */ |
| public static @NonNull MeasuredParagraph buildForStaticLayout( |
| @NonNull TextPaint paint, |
| @NonNull CharSequence text, |
| @IntRange(from = 0) int start, |
| @IntRange(from = 0) int end, |
| @NonNull TextDirectionHeuristic textDir, |
| @Nullable MeasuredParagraph recycle) { |
| final MeasuredParagraph mt = recycle == null ? obtain() : recycle; |
| mt.resetAndAnalyzeBidi(text, start, end, textDir); |
| if (mt.mTextLength == 0) { |
| // Need to build empty native measured text for StaticLayout. |
| // TODO: Stop creating empty measured text for empty lines. |
| long nativeBuilderPtr = nInitBuilder(); |
| try { |
| mt.bindNativeObject( |
| nBuildNativeMeasuredParagraph(nativeBuilderPtr, mt.mCopiedBuffer)); |
| } finally { |
| nFreeBuilder(nativeBuilderPtr); |
| } |
| return mt; |
| } |
| |
| long nativeBuilderPtr = nInitBuilder(); |
| try { |
| if (mt.mSpanned == null) { |
| // No style change by MetricsAffectingSpan. Just measure all text. |
| mt.applyMetricsAffectingSpan(paint, null /* spans */, start, end, nativeBuilderPtr); |
| mt.mSpanEndCache.append(end); |
| } else { |
| // There may be a MetricsAffectingSpan. Split into span transitions and apply |
| // styles. |
| int spanEnd; |
| for (int spanStart = start; spanStart < end; spanStart = spanEnd) { |
| spanEnd = mt.mSpanned.nextSpanTransition(spanStart, end, |
| MetricAffectingSpan.class); |
| MetricAffectingSpan[] spans = mt.mSpanned.getSpans(spanStart, spanEnd, |
| MetricAffectingSpan.class); |
| spans = TextUtils.removeEmptySpans(spans, mt.mSpanned, |
| MetricAffectingSpan.class); |
| mt.applyMetricsAffectingSpan(paint, spans, spanStart, spanEnd, |
| nativeBuilderPtr); |
| mt.mSpanEndCache.append(spanEnd); |
| } |
| } |
| mt.bindNativeObject(nBuildNativeMeasuredParagraph(nativeBuilderPtr, mt.mCopiedBuffer)); |
| } finally { |
| nFreeBuilder(nativeBuilderPtr); |
| } |
| |
| return mt; |
| } |
| |
| /** |
| * Reset internal state and analyzes text for bidirectional runs. |
| * |
| * @param text the character sequence to be measured |
| * @param start the inclusive start offset of the target region in the text |
| * @param end the exclusive end offset of the target region in the text |
| * @param textDir the text direction |
| */ |
| private void resetAndAnalyzeBidi(@NonNull CharSequence text, |
| @IntRange(from = 0) int start, // inclusive |
| @IntRange(from = 0) int end, // exclusive |
| @NonNull TextDirectionHeuristic textDir) { |
| reset(); |
| mSpanned = text instanceof Spanned ? (Spanned) text : null; |
| mTextStart = start; |
| mTextLength = end - start; |
| |
| if (mCopiedBuffer == null || mCopiedBuffer.length != mTextLength) { |
| mCopiedBuffer = new char[mTextLength]; |
| } |
| TextUtils.getChars(text, start, end, mCopiedBuffer, 0); |
| |
| // Replace characters associated with ReplacementSpan to U+FFFC. |
| if (mSpanned != null) { |
| ReplacementSpan[] spans = mSpanned.getSpans(start, end, ReplacementSpan.class); |
| |
| for (int i = 0; i < spans.length; i++) { |
| int startInPara = mSpanned.getSpanStart(spans[i]) - start; |
| int endInPara = mSpanned.getSpanEnd(spans[i]) - start; |
| // The span interval may be larger and must be restricted to [start, end) |
| if (startInPara < 0) startInPara = 0; |
| if (endInPara > mTextLength) endInPara = mTextLength; |
| Arrays.fill(mCopiedBuffer, startInPara, endInPara, OBJECT_REPLACEMENT_CHARACTER); |
| } |
| } |
| |
| if ((textDir == TextDirectionHeuristics.LTR |
| || textDir == TextDirectionHeuristics.FIRSTSTRONG_LTR |
| || textDir == TextDirectionHeuristics.ANYRTL_LTR) |
| && TextUtils.doesNotNeedBidi(mCopiedBuffer, 0, mTextLength)) { |
| mLevels.clear(); |
| mParaDir = Layout.DIR_LEFT_TO_RIGHT; |
| mLtrWithoutBidi = true; |
| } else { |
| final int bidiRequest; |
| if (textDir == TextDirectionHeuristics.LTR) { |
| bidiRequest = Layout.DIR_REQUEST_LTR; |
| } else if (textDir == TextDirectionHeuristics.RTL) { |
| bidiRequest = Layout.DIR_REQUEST_RTL; |
| } else if (textDir == TextDirectionHeuristics.FIRSTSTRONG_LTR) { |
| bidiRequest = Layout.DIR_REQUEST_DEFAULT_LTR; |
| } else if (textDir == TextDirectionHeuristics.FIRSTSTRONG_RTL) { |
| bidiRequest = Layout.DIR_REQUEST_DEFAULT_RTL; |
| } else { |
| final boolean isRtl = textDir.isRtl(mCopiedBuffer, 0, mTextLength); |
| bidiRequest = isRtl ? Layout.DIR_REQUEST_RTL : Layout.DIR_REQUEST_LTR; |
| } |
| mLevels.resize(mTextLength); |
| mParaDir = AndroidBidi.bidi(bidiRequest, mCopiedBuffer, mLevels.getRawArray()); |
| mLtrWithoutBidi = false; |
| } |
| } |
| |
| private void applyReplacementRun(@NonNull ReplacementSpan replacement, |
| @IntRange(from = 0) int start, // inclusive, in copied buffer |
| @IntRange(from = 0) int end, // exclusive, in copied buffer |
| /* Maybe Zero */ long nativeBuilderPtr) { |
| // Use original text. Shouldn't matter. |
| // TODO: passing uninitizlied FontMetrics to developers. Do we need to keep this for |
| // backward compatibility? or Should we initialize them for getFontMetricsInt? |
| final float width = replacement.getSize( |
| mCachedPaint, mSpanned, start + mTextStart, end + mTextStart, mCachedFm); |
| if (nativeBuilderPtr == 0) { |
| // Assigns all width to the first character. This is the same behavior as minikin. |
| mWidths.set(start, width); |
| if (end > start + 1) { |
| Arrays.fill(mWidths.getRawArray(), start + 1, end, 0.0f); |
| } |
| mWholeWidth += width; |
| } else { |
| nAddReplacementRun(nativeBuilderPtr, mCachedPaint.getNativeInstance(), start, end, |
| width); |
| } |
| } |
| |
| private void applyStyleRun(@IntRange(from = 0) int start, // inclusive, in copied buffer |
| @IntRange(from = 0) int end, // exclusive, in copied buffer |
| /* Maybe Zero */ long nativeBuilderPtr) { |
| if (nativeBuilderPtr != 0) { |
| mCachedPaint.getFontMetricsInt(mCachedFm); |
| } |
| |
| if (mLtrWithoutBidi) { |
| // If the whole text is LTR direction, just apply whole region. |
| if (nativeBuilderPtr == 0) { |
| mWholeWidth += mCachedPaint.getTextRunAdvances( |
| mCopiedBuffer, start, end - start, start, end - start, false /* isRtl */, |
| mWidths.getRawArray(), start); |
| } else { |
| nAddStyleRun(nativeBuilderPtr, mCachedPaint.getNativeInstance(), start, end, |
| false /* isRtl */); |
| } |
| } else { |
| // If there is multiple bidi levels, split into individual bidi level and apply style. |
| byte level = mLevels.get(start); |
| // Note that the empty text or empty range won't reach this method. |
| // Safe to search from start + 1. |
| for (int levelStart = start, levelEnd = start + 1;; ++levelEnd) { |
| if (levelEnd == end || mLevels.get(levelEnd) != level) { // transition point |
| final boolean isRtl = (level & 0x1) != 0; |
| if (nativeBuilderPtr == 0) { |
| final int levelLength = levelEnd - levelStart; |
| mWholeWidth += mCachedPaint.getTextRunAdvances( |
| mCopiedBuffer, levelStart, levelLength, levelStart, levelLength, |
| isRtl, mWidths.getRawArray(), levelStart); |
| } else { |
| nAddStyleRun(nativeBuilderPtr, mCachedPaint.getNativeInstance(), levelStart, |
| levelEnd, isRtl); |
| } |
| if (levelEnd == end) { |
| break; |
| } |
| levelStart = levelEnd; |
| level = mLevels.get(levelEnd); |
| } |
| } |
| } |
| } |
| |
| private void applyMetricsAffectingSpan( |
| @NonNull TextPaint paint, |
| @Nullable MetricAffectingSpan[] spans, |
| @IntRange(from = 0) int start, // inclusive, in original text buffer |
| @IntRange(from = 0) int end, // exclusive, in original text buffer |
| /* Maybe Zero */ long nativeBuilderPtr) { |
| mCachedPaint.set(paint); |
| // XXX paint should not have a baseline shift, but... |
| mCachedPaint.baselineShift = 0; |
| |
| final boolean needFontMetrics = nativeBuilderPtr != 0; |
| |
| if (needFontMetrics && mCachedFm == null) { |
| mCachedFm = new Paint.FontMetricsInt(); |
| } |
| |
| ReplacementSpan replacement = null; |
| if (spans != null) { |
| for (int i = 0; i < spans.length; i++) { |
| MetricAffectingSpan span = spans[i]; |
| if (span instanceof ReplacementSpan) { |
| // The last ReplacementSpan is effective for backward compatibility reasons. |
| replacement = (ReplacementSpan) span; |
| } else { |
| // TODO: No need to call updateMeasureState for ReplacementSpan as well? |
| span.updateMeasureState(mCachedPaint); |
| } |
| } |
| } |
| |
| final int startInCopiedBuffer = start - mTextStart; |
| final int endInCopiedBuffer = end - mTextStart; |
| |
| if (replacement != null) { |
| applyReplacementRun(replacement, startInCopiedBuffer, endInCopiedBuffer, |
| nativeBuilderPtr); |
| } else { |
| applyStyleRun(startInCopiedBuffer, endInCopiedBuffer, nativeBuilderPtr); |
| } |
| |
| if (needFontMetrics) { |
| if (mCachedPaint.baselineShift < 0) { |
| mCachedFm.ascent += mCachedPaint.baselineShift; |
| mCachedFm.top += mCachedPaint.baselineShift; |
| } else { |
| mCachedFm.descent += mCachedPaint.baselineShift; |
| mCachedFm.bottom += mCachedPaint.baselineShift; |
| } |
| |
| mFontMetrics.append(mCachedFm.top); |
| mFontMetrics.append(mCachedFm.bottom); |
| mFontMetrics.append(mCachedFm.ascent); |
| mFontMetrics.append(mCachedFm.descent); |
| } |
| } |
| |
| /** |
| * Returns the maximum index that the accumulated width not exceeds the width. |
| * |
| * If forward=false is passed, returns the minimum index from the end instead. |
| * |
| * This only works if the MeasuredParagraph is computed with computeForMeasurement. |
| * Undefined behavior in other case. |
| */ |
| @IntRange(from = 0) int breakText(int limit, boolean forwards, float width) { |
| float[] w = mWidths.getRawArray(); |
| if (forwards) { |
| int i = 0; |
| while (i < limit) { |
| width -= w[i]; |
| if (width < 0.0f) break; |
| i++; |
| } |
| while (i > 0 && mCopiedBuffer[i - 1] == ' ') i--; |
| return i; |
| } else { |
| int i = limit - 1; |
| while (i >= 0) { |
| width -= w[i]; |
| if (width < 0.0f) break; |
| i--; |
| } |
| while (i < limit - 1 && (mCopiedBuffer[i + 1] == ' ' || w[i + 1] == 0.0f)) { |
| i++; |
| } |
| return limit - i - 1; |
| } |
| } |
| |
| /** |
| * Returns the length of the substring. |
| * |
| * This only works if the MeasuredParagraph is computed with computeForMeasurement. |
| * Undefined behavior in other case. |
| */ |
| @FloatRange(from = 0.0f) float measure(int start, int limit) { |
| float width = 0; |
| float[] w = mWidths.getRawArray(); |
| for (int i = start; i < limit; ++i) { |
| width += w[i]; |
| } |
| return width; |
| } |
| |
| private static native /* Non Zero */ long nInitBuilder(); |
| |
| /** |
| * Apply style to make native measured text. |
| * |
| * @param nativeBuilderPtr The native MeasuredParagraph builder pointer. |
| * @param paintPtr The native paint pointer to be applied. |
| * @param start The start offset in the copied buffer. |
| * @param end The end offset in the copied buffer. |
| * @param isRtl True if the text is RTL. |
| */ |
| private static native void nAddStyleRun(/* Non Zero */ long nativeBuilderPtr, |
| /* Non Zero */ long paintPtr, |
| @IntRange(from = 0) int start, |
| @IntRange(from = 0) int end, |
| boolean isRtl); |
| |
| /** |
| * Apply ReplacementRun to make native measured text. |
| * |
| * @param nativeBuilderPtr The native MeasuredParagraph builder pointer. |
| * @param paintPtr The native paint pointer to be applied. |
| * @param start The start offset in the copied buffer. |
| * @param end The end offset in the copied buffer. |
| * @param width The width of the replacement. |
| */ |
| private static native void nAddReplacementRun(/* Non Zero */ long nativeBuilderPtr, |
| /* Non Zero */ long paintPtr, |
| @IntRange(from = 0) int start, |
| @IntRange(from = 0) int end, |
| @FloatRange(from = 0) float width); |
| |
| private static native long nBuildNativeMeasuredParagraph(/* Non Zero */ long nativeBuilderPtr, |
| @NonNull char[] text); |
| |
| private static native void nFreeBuilder(/* Non Zero */ long nativeBuilderPtr); |
| |
| @CriticalNative |
| private static native /* Non Zero */ long nGetReleaseFunc(); |
| } |