| /* |
| * Copyright (C) 2007 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <stdlib.h> |
| #include <stdint.h> |
| #include <sys/types.h> |
| |
| #include <cutils/compiler.h> |
| #include <cutils/native_handle.h> |
| #include <cutils/properties.h> |
| |
| #include <utils/Errors.h> |
| #include <utils/Log.h> |
| #include <utils/StopWatch.h> |
| |
| #include <ui/GraphicBuffer.h> |
| #include <ui/PixelFormat.h> |
| |
| #include <surfaceflinger/Surface.h> |
| |
| #include "clz.h" |
| #include "DisplayHardware/DisplayHardware.h" |
| #include "DisplayHardware/HWComposer.h" |
| #include "GLExtensions.h" |
| #include "Layer.h" |
| #include "SurfaceFlinger.h" |
| #include "SurfaceTextureLayer.h" |
| #include <math.h> |
| |
| #define DEBUG_RESIZE 0 |
| |
| |
| namespace android { |
| |
| // --------------------------------------------------------------------------- |
| |
| Layer::Layer(SurfaceFlinger* flinger, |
| DisplayID display, const sp<Client>& client) |
| : LayerBaseClient(flinger, display, client), |
| mTextureName(-1U), |
| mQueuedFrames(0), |
| mCurrentTransform(0), |
| mCurrentScalingMode(NATIVE_WINDOW_SCALING_MODE_FREEZE), |
| mCurrentOpacity(true), |
| mFrameLatencyNeeded(false), |
| mFrameLatencyOffset(0), |
| mFormat(PIXEL_FORMAT_NONE), |
| mGLExtensions(GLExtensions::getInstance()), |
| mOpaqueLayer(true), |
| mNeedsDithering(false), |
| mSecure(false), |
| mProtectedByApp(false) |
| { |
| mCurrentCrop.makeInvalid(); |
| glGenTextures(1, &mTextureName); |
| } |
| |
| void Layer::onLayerDisplayed() { |
| if (mFrameLatencyNeeded) { |
| const DisplayHardware& hw(graphicPlane(0).displayHardware()); |
| mFrameStats[mFrameLatencyOffset].timestamp = mSurfaceTexture->getTimestamp(); |
| mFrameStats[mFrameLatencyOffset].set = systemTime(); |
| mFrameStats[mFrameLatencyOffset].vsync = hw.getRefreshTimestamp(); |
| mFrameLatencyOffset = (mFrameLatencyOffset + 1) % 128; |
| mFrameLatencyNeeded = false; |
| } |
| } |
| |
| void Layer::onFirstRef() |
| { |
| LayerBaseClient::onFirstRef(); |
| |
| struct FrameQueuedListener : public SurfaceTexture::FrameAvailableListener { |
| FrameQueuedListener(Layer* layer) : mLayer(layer) { } |
| private: |
| wp<Layer> mLayer; |
| virtual void onFrameAvailable() { |
| sp<Layer> that(mLayer.promote()); |
| if (that != 0) { |
| that->onFrameQueued(); |
| } |
| } |
| }; |
| mSurfaceTexture = new SurfaceTextureLayer(mTextureName, this); |
| mSurfaceTexture->setFrameAvailableListener(new FrameQueuedListener(this)); |
| mSurfaceTexture->setSynchronousMode(true); |
| #ifdef USE_TRIPLE_BUFFERING |
| #warning "using triple buffering" |
| mSurfaceTexture->setBufferCountServer(3); |
| #else |
| mSurfaceTexture->setBufferCountServer(2); |
| #endif |
| } |
| |
| Layer::~Layer() |
| { |
| mFlinger->postMessageAsync( |
| new SurfaceFlinger::MessageDestroyGLTexture(mTextureName) ); |
| } |
| |
| void Layer::onFrameQueued() { |
| android_atomic_inc(&mQueuedFrames); |
| mFlinger->signalEvent(); |
| } |
| |
| // called with SurfaceFlinger::mStateLock as soon as the layer is entered |
| // in the purgatory list |
| void Layer::onRemoved() |
| { |
| mSurfaceTexture->abandon(); |
| } |
| |
| void Layer::setName(const String8& name) { |
| LayerBase::setName(name); |
| mSurfaceTexture->setName(name); |
| } |
| |
| sp<ISurface> Layer::createSurface() |
| { |
| class BSurface : public BnSurface, public LayerCleaner { |
| wp<const Layer> mOwner; |
| virtual sp<ISurfaceTexture> getSurfaceTexture() const { |
| sp<ISurfaceTexture> res; |
| sp<const Layer> that( mOwner.promote() ); |
| if (that != NULL) { |
| res = that->mSurfaceTexture; |
| } |
| return res; |
| } |
| public: |
| BSurface(const sp<SurfaceFlinger>& flinger, |
| const sp<Layer>& layer) |
| : LayerCleaner(flinger, layer), mOwner(layer) { } |
| }; |
| sp<ISurface> sur(new BSurface(mFlinger, this)); |
| return sur; |
| } |
| |
| wp<IBinder> Layer::getSurfaceTextureBinder() const |
| { |
| return mSurfaceTexture->asBinder(); |
| } |
| |
| status_t Layer::setBuffers( uint32_t w, uint32_t h, |
| PixelFormat format, uint32_t flags) |
| { |
| // this surfaces pixel format |
| PixelFormatInfo info; |
| status_t err = getPixelFormatInfo(format, &info); |
| if (err) return err; |
| |
| // the display's pixel format |
| const DisplayHardware& hw(graphicPlane(0).displayHardware()); |
| uint32_t const maxSurfaceDims = min( |
| hw.getMaxTextureSize(), hw.getMaxViewportDims()); |
| |
| // never allow a surface larger than what our underlying GL implementation |
| // can handle. |
| if ((uint32_t(w)>maxSurfaceDims) || (uint32_t(h)>maxSurfaceDims)) { |
| return BAD_VALUE; |
| } |
| |
| PixelFormatInfo displayInfo; |
| getPixelFormatInfo(hw.getFormat(), &displayInfo); |
| const uint32_t hwFlags = hw.getFlags(); |
| |
| mFormat = format; |
| |
| mSecure = (flags & ISurfaceComposer::eSecure) ? true : false; |
| mProtectedByApp = (flags & ISurfaceComposer::eProtectedByApp) ? true : false; |
| mOpaqueLayer = (flags & ISurfaceComposer::eOpaque); |
| mCurrentOpacity = getOpacityForFormat(format); |
| |
| mSurfaceTexture->setDefaultBufferSize(w, h); |
| mSurfaceTexture->setDefaultBufferFormat(format); |
| |
| // we use the red index |
| int displayRedSize = displayInfo.getSize(PixelFormatInfo::INDEX_RED); |
| int layerRedsize = info.getSize(PixelFormatInfo::INDEX_RED); |
| mNeedsDithering = layerRedsize > displayRedSize; |
| |
| return NO_ERROR; |
| } |
| |
| void Layer::setGeometry(hwc_layer_t* hwcl) |
| { |
| LayerBaseClient::setGeometry(hwcl); |
| |
| hwcl->flags &= ~HWC_SKIP_LAYER; |
| |
| // we can't do alpha-fade with the hwc HAL |
| const State& s(drawingState()); |
| if (s.alpha < 0xFF) { |
| hwcl->flags = HWC_SKIP_LAYER; |
| } |
| |
| /* |
| * Transformations are applied in this order: |
| * 1) buffer orientation/flip/mirror |
| * 2) state transformation (window manager) |
| * 3) layer orientation (screen orientation) |
| * mTransform is already the composition of (2) and (3) |
| * (NOTE: the matrices are multiplied in reverse order) |
| */ |
| |
| const Transform bufferOrientation(mCurrentTransform); |
| const Transform tr(mTransform * bufferOrientation); |
| |
| // this gives us only the "orientation" component of the transform |
| const uint32_t finalTransform = tr.getOrientation(); |
| |
| // we can only handle simple transformation |
| if (finalTransform & Transform::ROT_INVALID) { |
| hwcl->flags = HWC_SKIP_LAYER; |
| } else { |
| hwcl->transform = finalTransform; |
| } |
| |
| if (isCropped()) { |
| hwcl->sourceCrop.left = mCurrentCrop.left; |
| hwcl->sourceCrop.top = mCurrentCrop.top; |
| hwcl->sourceCrop.right = mCurrentCrop.right; |
| hwcl->sourceCrop.bottom = mCurrentCrop.bottom; |
| } else { |
| const sp<GraphicBuffer>& buffer(mActiveBuffer); |
| hwcl->sourceCrop.left = 0; |
| hwcl->sourceCrop.top = 0; |
| if (buffer != NULL) { |
| hwcl->sourceCrop.right = buffer->width; |
| hwcl->sourceCrop.bottom = buffer->height; |
| } else { |
| hwcl->sourceCrop.right = mTransformedBounds.width(); |
| hwcl->sourceCrop.bottom = mTransformedBounds.height(); |
| } |
| } |
| } |
| |
| void Layer::setPerFrameData(hwc_layer_t* hwcl) { |
| const sp<GraphicBuffer>& buffer(mActiveBuffer); |
| if (buffer == NULL) { |
| // this can happen if the client never drew into this layer yet, |
| // or if we ran out of memory. In that case, don't let |
| // HWC handle it. |
| hwcl->flags |= HWC_SKIP_LAYER; |
| hwcl->handle = NULL; |
| } else { |
| hwcl->handle = buffer->handle; |
| } |
| } |
| |
| void Layer::onDraw(const Region& clip) const |
| { |
| if (CC_UNLIKELY(mActiveBuffer == 0)) { |
| // the texture has not been created yet, this Layer has |
| // in fact never been drawn into. This happens frequently with |
| // SurfaceView because the WindowManager can't know when the client |
| // has drawn the first time. |
| |
| // If there is nothing under us, we paint the screen in black, otherwise |
| // we just skip this update. |
| |
| // figure out if there is something below us |
| Region under; |
| const SurfaceFlinger::LayerVector& drawingLayers( |
| mFlinger->mDrawingState.layersSortedByZ); |
| const size_t count = drawingLayers.size(); |
| for (size_t i=0 ; i<count ; ++i) { |
| const sp<LayerBase>& layer(drawingLayers[i]); |
| if (layer.get() == static_cast<LayerBase const*>(this)) |
| break; |
| under.orSelf(layer->visibleRegionScreen); |
| } |
| // if not everything below us is covered, we plug the holes! |
| Region holes(clip.subtract(under)); |
| if (!holes.isEmpty()) { |
| clearWithOpenGL(holes, 0, 0, 0, 1); |
| } |
| return; |
| } |
| |
| if (!isProtected()) { |
| glBindTexture(GL_TEXTURE_EXTERNAL_OES, mTextureName); |
| GLenum filter = GL_NEAREST; |
| if (getFiltering() || needsFiltering() || isFixedSize() || isCropped()) { |
| // TODO: we could be more subtle with isFixedSize() |
| filter = GL_LINEAR; |
| } |
| glTexParameterx(GL_TEXTURE_EXTERNAL_OES, GL_TEXTURE_MAG_FILTER, filter); |
| glTexParameterx(GL_TEXTURE_EXTERNAL_OES, GL_TEXTURE_MIN_FILTER, filter); |
| glMatrixMode(GL_TEXTURE); |
| glLoadMatrixf(mTextureMatrix); |
| glMatrixMode(GL_MODELVIEW); |
| glDisable(GL_TEXTURE_2D); |
| glEnable(GL_TEXTURE_EXTERNAL_OES); |
| } else { |
| glBindTexture(GL_TEXTURE_2D, mFlinger->getProtectedTexName()); |
| glMatrixMode(GL_TEXTURE); |
| glLoadIdentity(); |
| glMatrixMode(GL_MODELVIEW); |
| glDisable(GL_TEXTURE_EXTERNAL_OES); |
| glEnable(GL_TEXTURE_2D); |
| } |
| |
| drawWithOpenGL(clip); |
| |
| glDisable(GL_TEXTURE_EXTERNAL_OES); |
| glDisable(GL_TEXTURE_2D); |
| } |
| |
| // As documented in libhardware header, formats in the range |
| // 0x100 - 0x1FF are specific to the HAL implementation, and |
| // are known to have no alpha channel |
| // TODO: move definition for device-specific range into |
| // hardware.h, instead of using hard-coded values here. |
| #define HARDWARE_IS_DEVICE_FORMAT(f) ((f) >= 0x100 && (f) <= 0x1FF) |
| |
| bool Layer::getOpacityForFormat(uint32_t format) |
| { |
| if (HARDWARE_IS_DEVICE_FORMAT(format)) { |
| return true; |
| } |
| PixelFormatInfo info; |
| status_t err = getPixelFormatInfo(PixelFormat(format), &info); |
| // in case of error (unknown format), we assume no blending |
| return (err || info.h_alpha <= info.l_alpha); |
| } |
| |
| |
| bool Layer::isOpaque() const |
| { |
| // if we don't have a buffer yet, we're translucent regardless of the |
| // layer's opaque flag. |
| if (mActiveBuffer == 0) { |
| return false; |
| } |
| |
| // if the layer has the opaque flag, then we're always opaque, |
| // otherwise we use the current buffer's format. |
| return mOpaqueLayer || mCurrentOpacity; |
| } |
| |
| bool Layer::isProtected() const |
| { |
| const sp<GraphicBuffer>& activeBuffer(mActiveBuffer); |
| return (activeBuffer != 0) && |
| (activeBuffer->getUsage() & GRALLOC_USAGE_PROTECTED); |
| } |
| |
| uint32_t Layer::doTransaction(uint32_t flags) |
| { |
| const Layer::State& front(drawingState()); |
| const Layer::State& temp(currentState()); |
| |
| const bool sizeChanged = (front.requested_w != temp.requested_w) || |
| (front.requested_h != temp.requested_h); |
| |
| if (sizeChanged) { |
| // the size changed, we need to ask our client to request a new buffer |
| ALOGD_IF(DEBUG_RESIZE, |
| "doTransaction: " |
| "resize (layer=%p), requested (%dx%d), drawing (%d,%d), " |
| "scalingMode=%d", |
| this, |
| int(temp.requested_w), int(temp.requested_h), |
| int(front.requested_w), int(front.requested_h), |
| mCurrentScalingMode); |
| |
| if (!isFixedSize()) { |
| // this will make sure LayerBase::doTransaction doesn't update |
| // the drawing state's size |
| Layer::State& editDraw(mDrawingState); |
| editDraw.requested_w = temp.requested_w; |
| editDraw.requested_h = temp.requested_h; |
| } |
| |
| // record the new size, form this point on, when the client request |
| // a buffer, it'll get the new size. |
| mSurfaceTexture->setDefaultBufferSize(temp.requested_w, |
| temp.requested_h); |
| } |
| |
| return LayerBase::doTransaction(flags); |
| } |
| |
| bool Layer::isFixedSize() const { |
| return mCurrentScalingMode != NATIVE_WINDOW_SCALING_MODE_FREEZE; |
| } |
| |
| bool Layer::isCropped() const { |
| return !mCurrentCrop.isEmpty(); |
| } |
| |
| // ---------------------------------------------------------------------------- |
| // pageflip handling... |
| // ---------------------------------------------------------------------------- |
| |
| void Layer::lockPageFlip(bool& recomputeVisibleRegions) |
| { |
| if (mQueuedFrames > 0) { |
| // Capture the old state of the layer for comparisons later |
| const bool oldOpacity = isOpaque(); |
| sp<GraphicBuffer> oldActiveBuffer = mActiveBuffer; |
| |
| // signal another event if we have more frames pending |
| if (android_atomic_dec(&mQueuedFrames) > 1) { |
| mFlinger->signalEvent(); |
| } |
| |
| if (mSurfaceTexture->updateTexImage() < NO_ERROR) { |
| // something happened! |
| recomputeVisibleRegions = true; |
| return; |
| } |
| |
| // update the active buffer |
| mActiveBuffer = mSurfaceTexture->getCurrentBuffer(); |
| mFrameLatencyNeeded = true; |
| |
| const Rect crop(mSurfaceTexture->getCurrentCrop()); |
| const uint32_t transform(mSurfaceTexture->getCurrentTransform()); |
| const uint32_t scalingMode(mSurfaceTexture->getCurrentScalingMode()); |
| if ((crop != mCurrentCrop) || |
| (transform != mCurrentTransform) || |
| (scalingMode != mCurrentScalingMode)) |
| { |
| mCurrentCrop = crop; |
| mCurrentTransform = transform; |
| mCurrentScalingMode = scalingMode; |
| mFlinger->invalidateHwcGeometry(); |
| } |
| |
| GLfloat textureMatrix[16]; |
| mSurfaceTexture->getTransformMatrix(textureMatrix); |
| if (memcmp(textureMatrix, mTextureMatrix, sizeof(textureMatrix))) { |
| memcpy(mTextureMatrix, textureMatrix, sizeof(textureMatrix)); |
| mFlinger->invalidateHwcGeometry(); |
| } |
| |
| uint32_t bufWidth = mActiveBuffer->getWidth(); |
| uint32_t bufHeight = mActiveBuffer->getHeight(); |
| if (oldActiveBuffer != NULL) { |
| if (bufWidth != uint32_t(oldActiveBuffer->width) || |
| bufHeight != uint32_t(oldActiveBuffer->height)) { |
| mFlinger->invalidateHwcGeometry(); |
| } |
| } |
| |
| mCurrentOpacity = getOpacityForFormat(mActiveBuffer->format); |
| if (oldOpacity != isOpaque()) { |
| recomputeVisibleRegions = true; |
| } |
| |
| glTexParameterx(GL_TEXTURE_EXTERNAL_OES, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); |
| glTexParameterx(GL_TEXTURE_EXTERNAL_OES, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); |
| |
| // update the layer size if needed |
| const Layer::State& front(drawingState()); |
| |
| // FIXME: mPostedDirtyRegion = dirty & bounds |
| mPostedDirtyRegion.set(front.w, front.h); |
| |
| if ((front.w != front.requested_w) || |
| (front.h != front.requested_h)) |
| { |
| // check that we received a buffer of the right size |
| // (Take the buffer's orientation into account) |
| if (mCurrentTransform & Transform::ROT_90) { |
| swap(bufWidth, bufHeight); |
| } |
| |
| if (isFixedSize() || |
| (bufWidth == front.requested_w && |
| bufHeight == front.requested_h)) |
| { |
| // Here we pretend the transaction happened by updating the |
| // current and drawing states. Drawing state is only accessed |
| // in this thread, no need to have it locked |
| Layer::State& editDraw(mDrawingState); |
| editDraw.w = editDraw.requested_w; |
| editDraw.h = editDraw.requested_h; |
| |
| // We also need to update the current state so that we don't |
| // end-up doing too much work during the next transaction. |
| // NOTE: We actually don't need hold the transaction lock here |
| // because State::w and State::h are only accessed from |
| // this thread |
| Layer::State& editTemp(currentState()); |
| editTemp.w = editDraw.w; |
| editTemp.h = editDraw.h; |
| |
| // recompute visible region |
| recomputeVisibleRegions = true; |
| } |
| |
| ALOGD_IF(DEBUG_RESIZE, |
| "lockPageFlip : " |
| " (layer=%p), buffer (%ux%u, tr=%02x), " |
| "requested (%dx%d)", |
| this, |
| bufWidth, bufHeight, mCurrentTransform, |
| front.requested_w, front.requested_h); |
| } |
| } |
| } |
| |
| void Layer::unlockPageFlip( |
| const Transform& planeTransform, Region& outDirtyRegion) |
| { |
| Region dirtyRegion(mPostedDirtyRegion); |
| if (!dirtyRegion.isEmpty()) { |
| mPostedDirtyRegion.clear(); |
| // The dirty region is given in the layer's coordinate space |
| // transform the dirty region by the surface's transformation |
| // and the global transformation. |
| const Layer::State& s(drawingState()); |
| const Transform tr(planeTransform * s.transform); |
| dirtyRegion = tr.transform(dirtyRegion); |
| |
| // At this point, the dirty region is in screen space. |
| // Make sure it's constrained by the visible region (which |
| // is in screen space as well). |
| dirtyRegion.andSelf(visibleRegionScreen); |
| outDirtyRegion.orSelf(dirtyRegion); |
| } |
| } |
| |
| void Layer::dump(String8& result, char* buffer, size_t SIZE) const |
| { |
| LayerBaseClient::dump(result, buffer, SIZE); |
| |
| sp<const GraphicBuffer> buf0(mActiveBuffer); |
| uint32_t w0=0, h0=0, s0=0, f0=0; |
| if (buf0 != 0) { |
| w0 = buf0->getWidth(); |
| h0 = buf0->getHeight(); |
| s0 = buf0->getStride(); |
| f0 = buf0->format; |
| } |
| snprintf(buffer, SIZE, |
| " " |
| "format=%2d, activeBuffer=[%4ux%4u:%4u,%3X]," |
| " transform-hint=0x%02x, queued-frames=%d\n", |
| mFormat, w0, h0, s0,f0, |
| getTransformHint(), mQueuedFrames); |
| |
| result.append(buffer); |
| |
| if (mSurfaceTexture != 0) { |
| mSurfaceTexture->dump(result, " ", buffer, SIZE); |
| } |
| } |
| |
| void Layer::dumpStats(String8& result, char* buffer, size_t SIZE) const |
| { |
| LayerBaseClient::dumpStats(result, buffer, SIZE); |
| const size_t o = mFrameLatencyOffset; |
| const DisplayHardware& hw(graphicPlane(0).displayHardware()); |
| const nsecs_t period = hw.getRefreshPeriod(); |
| result.appendFormat("%lld\n", period); |
| for (size_t i=0 ; i<128 ; i++) { |
| const size_t index = (o+i) % 128; |
| const nsecs_t time_app = mFrameStats[index].timestamp; |
| const nsecs_t time_set = mFrameStats[index].set; |
| const nsecs_t time_vsync = mFrameStats[index].vsync; |
| result.appendFormat("%lld\t%lld\t%lld\n", |
| time_app, |
| time_vsync, |
| time_set); |
| } |
| result.append("\n"); |
| } |
| |
| void Layer::clearStats() |
| { |
| LayerBaseClient::clearStats(); |
| memset(mFrameStats, 0, sizeof(mFrameStats)); |
| } |
| |
| uint32_t Layer::getEffectiveUsage(uint32_t usage) const |
| { |
| // TODO: should we do something special if mSecure is set? |
| if (mProtectedByApp) { |
| // need a hardware-protected path to external video sink |
| usage |= GraphicBuffer::USAGE_PROTECTED; |
| } |
| usage |= GraphicBuffer::USAGE_HW_COMPOSER; |
| return usage; |
| } |
| |
| uint32_t Layer::getTransformHint() const { |
| uint32_t orientation = 0; |
| if (!mFlinger->mDebugDisableTransformHint) { |
| orientation = getPlaneOrientation(); |
| if (orientation & Transform::ROT_INVALID) { |
| orientation = 0; |
| } |
| } |
| return orientation; |
| } |
| |
| // --------------------------------------------------------------------------- |
| |
| |
| }; // namespace android |