Gitiles
Code Review Sign In
gerrit-public.fairphone.software / platform / frameworks / base / 54b6cfa9a9e5b861a9930af873580d6dc20f773c / . / core / res / res / values / strings.xml
blob: bec3bc870179cb3ccaf329aa80913517d2329240 [file] [log] [blame]
<?xml version="1.0" encoding="utf-8"?>
<!--
/* //device/apps/common/assets/res/any/strings.xml
**
** Copyright 2006, The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
** http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
-->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
<!-- Abbreviations for different units of information and computer storage -->
<!-- used by android.content.Formatter.formatFileSize -->
<string name="byteShort">B</string>
<string name="kilobyteShort">KB</string>
<string name="megabyteShort">MB</string>
<string name="gigabyteShort">GB</string>
<string name="terabyteShort">TB</string>
<string name="petabyteShort">PB</string>
<string name="selectMenuLabel">Select</string>
<string name="untitled">&lt;untitled&gt;</string>
<string name="ellipsis">\u2026</string>
<!-- How to display the lack of a phone number -->
<string name="emptyPhoneNumber">(No phone number)</string>
<!-- How to display the lack of a name -->
<string name="unknownName">(Unknown)</string>
<string name="screen_progress">Working\u2026</string>
<!-- What the UI should display for "voice mail" unless overridden by the SIM-->
<string name="defaultVoiceMailAlphaTag">Voicemail</string>
<!-- What the UI should display for "Msisdn" unless overridden by the SIM-->
<string name="defaultMsisdnAlphaTag">MSISDN1</string>
<!-- For GsmMmiCode.java -->
<string name="mmiError">Connection problem or invalid MMI code.</string>
<string name="serviceEnabled">Service was enabled.</string>
<string name="serviceEnabledFor">Service was enabled for:</string>
<string name="serviceDisabled">Service has been disabled.</string>
<string name="serviceRegistered">Registration was successful.</string>
<string name="serviceErased">Erasure was successful.</string>
<string name="passwordIncorrect">Incorrect password.</string>
<string name="mmiComplete">MMI complete.</string>
<string name="badPin">The old PIN you typed is not correct.</string>
<string name="badPuk">The PUK you typed is not correct.</string>
<string name="mismatchPin">The PINs you entered do not match.</string>
<string name="invalidPin">Type a PIN that is 4 to 8 numbers.</string>
<string name="needPuk2">Type PUK2 to unblock SIM card.</string>
<string name="ClipMmi">Incoming Caller ID</string>
<string name="ClirMmi">Outgoing Caller ID</string>
<string name="CfMmi">Call forwarding</string>
<string name="CwMmi">Call waiting</string>
<string name="BaMmi">Call barring</string>
<string name="PwdMmi">Password change</string>
<string name="PinMmi">PIN change</string>
<string name="CLIRDefaultOnNextCallOn">Caller ID defaults to restricted. Next call: Restricted</string>
<string name="CLIRDefaultOnNextCallOff">Caller ID defaults to restricted. Next call: Not restricted</string>
<string name="CLIRDefaultOffNextCallOn">Caller ID defaults to not restricted. Next call: Restricted</string>
<string name="CLIRDefaultOffNextCallOff">Caller ID defaults to not restricted. Next call: Not restricted</string>
<string name="serviceNotProvisioned">Service not provisioned.</string>
<string name="CLIRPermanent">The caller ID setting cannot be changed.</string>
<!-- Mappings between TS 27.007 +CFCC/+CLCK "service classes" and human-readable strings-->
<string name="serviceClassVoice">Voice</string>
<string name="serviceClassData">Data</string>
<string name="serviceClassFAX">FAX</string>
<string name="serviceClassSMS">SMS</string>
<string name="serviceClassDataAsync">Async</string>
<string name="serviceClassDataSync">Sync</string>
<string name="serviceClassPacket">Packet</string>
<string name="serviceClassPAD">PAD</string>
<string name="cfReasonUnconditional">Call forwarding - Always</string>
<string name="cfReasonBusy">Call forwarding - Busy</string>
<string name="cfReasonNRy">Call forwarding - No reply</string>
<string name="cfReasonNR">Call forwarding - Not reachable</string>
<!--
{0} is one of "bearerServiceCode*"
{1} is dialing number
{2} is time in seconds
cfTemplateRegistered and cfTemplateRegisteredTime mean that a phone number
has been set but forwarding is not on.
-->
<string name="cfTemplateNotForwarded">{0}: Not forwarded</string>
<string name="cfTemplateForwarded">{0}: {1}</string>
<string name="cfTemplateForwardedTime">{0}: {1} after {2} seconds</string>
<string name="cfTemplateRegistered">{0}: Not forwarded</string>
<string name="cfTemplateRegisteredTime">{0}: Not forwarded</string>
<string name="simAbsentLabel">SIM card absent or incorrectly inserted.</string>
<string name="simPINLabel">SIM PIN required (and presently unsupported).</string>
<string name="simPUKLabel">SIM PUK required (and presently unsupported).</string>
<string name="simNetworkPersonalizationLabel">SIM card cannot be used on this phone.</string>
<!-- BrowserFrame strings -->
<string name="browserSavedFormData">Saved form data.</string>
<!-- android.net.http Error strings -->
<string name="httpErrorOk">OK</string>
<string name="httpError">The Web page contains an error.</string>
<string name="httpErrorLookup">The URL could not be found.</string>
<string name="httpErrorUnsupportedAuthScheme">The site authentication scheme is not supported.</string>
<string name="httpErrorAuth">Authentication was unsuccessful.</string>
<string name="httpErrorProxyAuth">Authentication via the proxy server was unsuccessful.</string>
<string name="httpErrorConnect">The connection to the server was unsuccessful.</string>
<string name="httpErrorIO">The server failed to communicate. Try again later.</string>
<string name="httpErrorTimeout">The connection to the server timed out.</string>
<string name="httpErrorRedirectLoop">The page contains too many server redirects.</string>
<string name="httpErrorUnsupportedScheme">The protocol is not supported.</string>
<string name="httpErrorFailedSslHandshake">A secure connection could not be established.</string>
<string name="httpErrorBadUrl">The page could not be opened because the URL is invalid.</string>
<string name="httpErrorFile">The file could not be accessed.</string>
<string name="httpErrorFileNotFound">The requested file was not found.</string>
<string name="httpErrorTooManyRequests">Too many requests are being processed. Try again later.</string>
<!-- Sync notifications -->
<string name="contentServiceSync">Sync</string>
<string name="contentServiceXmppAvailable">XMPP Active</string>
<string name="contentServiceSyncNotificationTitle">Sync</string>
<string name="contentServiceSyncNotificationDesc">Syncing</string>
<string name="contentServiceTooManyDeletesNotificationDesc">Too many %s deletes.</string>
<string name="contentServiceSyncErrorNotificationDesc">Sync is experiencing problems.</string>
<!-- Low memory Toast -->
<string name="low_memory">Phone storage is full! Delete some files to free space.</string>
<!-- Display name of local number -->
<string name="me">Me</string>
<!-- Power Dialog -->
<string name="power_dialog">Phone options</string>
<string name="activate_keyguard">Screen lock</string>
<string name="silent_mode">Silent mode</string>
<string name="turn_on_radio">Turn on wireless</string>
<string name="turn_off_radio">Turn off wireless</string>
<string name="screen_lock">Screen lock</string>
<string name="power_off">Power off</string>
<!-- Shutdown Progress Dialog -->
<string name="shutdown_progress">Shutting down\u2026</string>
<!-- Shutdown Confirmation Dialog -->
<string name="shutdown_confirm">Your phone will shut down.</string>
<!-- Recent Tasks dialog -->
<string name="no_recent_tasks">No recent applications.</string>
<!-- Global Actions Dialog -->
<string name="global_actions">Phone options</string>
<!-- label for item that locks the phone in the global actions dialog -->
<string name="global_action_lock">Screen lock</string>
<!-- label for item that turns off power in global actions dialog -->
<string name="global_action_power_off">Power off</string>
<!-- label for item that enables silent mode in global actions dialog -->
<string name="global_action_toggle_silent_mode">Silent mode</string>
<!-- status message in global actions dialog for when silent mode is enabled -->
<string name="global_action_silent_mode_on_status">Sound is OFF</string>
<!-- status message in global actions dialog for when silent mode is disabled -->
<string name="global_action_silent_mode_off_status">Sound is ON</string>
<!-- Activity Manager -->
<string name="safeMode">Safe mode</string>
<!-- Permission Groups -->
<string name="permgrouplab_costMoney">Services that cost you money</string>
<string name="permgroupdesc_costMoney">Allow applications to do things
that can cost you money.</string>
<string name="permgrouplab_messages">Your messages</string>
<string name="permgroupdesc_messages">Read and write your SMS,
e-mail, and other messages.</string>
<string name="permgrouplab_personalInfo">Your personal information</string>
<string name="permgroupdesc_personalInfo">Direct access to your contacts
and calendar stored on the phone.</string>
<string name="permgrouplab_location">Your location</string>
<string name="permgroupdesc_location">Monitor your physical location</string>
<string name="permgrouplab_network">Network communication</string>
<string name="permgroupdesc_network">Allow applications to access
various network features.</string>
<string name="permgrouplab_accounts">Your Google accounts</string>
<string name="permgroupdesc_accounts">Access the available Google accounts.</string>
<string name="permgrouplab_hardwareControls">Hardware controls</string>
<string name="permgroupdesc_hardwareControls">Direct access to hardware on
the handset.</string>
<string name="permgrouplab_phoneCalls">Phone calls</string>
<string name="permgroupdesc_phoneCalls">Monitor, record, and process
phone calls.</string>
<string name="permgrouplab_systemTools">System tools</string>
<string name="permgroupdesc_systemTools">Lower-level access and control
of the system.</string>
<string name="permgrouplab_developmentTools">Development tools</string>
<string name="permgroupdesc_developmentTools">Features only needed for
application developers.</string>
<!-- Permissions -->
<string name="permlab_statusBar">disable or modify status bar</string>
<string name="permdesc_statusBar">Allows application to disable
the status bar or add and remove system icons.</string>
<string name="permlab_expandStatusBar">expand/collapse status bar</string>
<string name="permdesc_expandStatusBar">Allows application to
expand or collapse the status bar.</string>
<string name="permlab_processOutgoingCalls">intercept outgoing calls</string>
<string name="permdesc_processOutgoingCalls">Allows application to
process outgoing calls and change the number to be dialed. Malicious
applications may monitor, redirect, or prevent outgoing calls.</string>
<string name="permlab_receiveSms">receive SMS</string>
<string name="permdesc_receiveSms">Allows application to receive
and process SMS messages. Malicious applications may monitor
your messages or delete them without showing them to you.</string>
<string name="permlab_receiveMms">receive MMS</string>
<string name="permdesc_receiveMms">Allows application to receive
and process MMS messages. Malicious applications may monitor
your messages or delete them without showing them to you.</string>
<string name="permlab_sendSms">send SMS messages</string>
<string name="permdesc_sendSms">Allows application to send SMS
messages. Malicious applications may cost you money by sending
messages without your confirmation.</string>
<string name="permlab_readSms">read SMS or MMS</string>
<string name="permdesc_readSms">Allows application to read
SMS messages stored on your phone or SIM card. Malicious applications
may read your confidential messages.</string>
<string name="permlab_writeSms">edit SMS or MMS</string>
<string name="permdesc_writeSms">Allows application to write
to SMS messages stored on your phone or SIM card. Malicious applications
may delete your messages.</string>
<string name="permlab_receiveWapPush">receive WAP</string>
<string name="permdesc_receiveWapPush">Allows application to receive
and process WAP messages. Malicious applications may monitor
your messages or delete them without showing them to you.</string>
<string name="permlab_getTasks">retrieve running applications</string>
<string name="permdesc_getTasks">Allows application to retrieve
information about currently and recently running tasks. May allow
malicious applications to discover private information about other applications.</string>
<string name="permlab_reorderTasks">reorder running applications</string>
<string name="permdesc_reorderTasks">Allows an application to move
tasks to the foreground and background. Malicious applications can force
themselves to the front without your control.</string>
<string name="permlab_setDebugApp">enable application debugging</string>
<string name="permdesc_setDebugApp">Allows an application to turn
on debugging for another application. Malicious applications can use this
to kill other applications.</string>
<string name="permlab_changeConfiguration">change your UI settings</string>
<string name="permdesc_changeConfiguration">Allows an application to
change the current configuration, such as the locale or overall font
size.</string>
<string name="permlab_restartPackages">restart other applications</string>
<string name="permdesc_restartPackages">Allows an application to
forcibly restart other applications.</string>
<string name="permlab_setProcessForeground">keep from being stopped</string>
<string name="permdesc_setProcessForeground">Allows an application to make
any process run in the foreground, so it can't be killed.
Should never be needed for normal applications.</string>
<string name="permlab_forceBack">force application to close</string>
<string name="permdesc_forceBack">Allows an application to force any
activity that is in the foreground to close and go back.
Should never be needed for normal applications.</string>
<string name="permlab_dump">retrieve system internal state</string>
<string name="permdesc_dump">Allows application to retrieve
internal state of the system. Malicious applications may retrieve
a wide variety of private and secure information that they should
never normally need.</string>
<string name="permlab_addSystemService">publish low-level services</string>
<string name="permdesc_addSystemService">Allows application to publish
its own low-level system services. Malicious applications may hijack
the system, and steal or corrupt any data on it.</string>
<string name="permlab_runSetActivityWatcher">monitor and control all application launching</string>
<string name="permdesc_runSetActivityWatcher">Allows an application to
monitor and control how the system launches activities.
Malicious applications may completely compromise the system. This
permission is only needed for development, never for normal
phone usage.</string>
<string name="permlab_broadcastPackageRemoved">send package removed broadcast</string>
<string name="permdesc_broadcastPackageRemoved">Allows an application to
broadcast a notification that an application package has been removed.
Malicious applications may use this to kill any other running
application.</string>
<string name="permlab_setProcessLimit">limit number of running processes</string>
<string name="permdesc_setProcessLimit">Allows an application
to control the maximum number of processes that will run. Never
needed for normal applications.</string>
<string name="permlab_setAlwaysFinish">make all background applications close</string>
<string name="permdesc_setAlwaysFinish">Allows an application
to control whether activities are always finished as soon as they
go to the background. Never needed for normal applications.</string>
<string name="permlab_fotaUpdate">automatically install system updates</string>
<string name="permdesc_fotaUpdate">Allows an application to receive
notifications about pending system updates and trigger their
installation. Malicious applications may use this to corrupt the system
with unauthorized updates, or generally interfere with the update
process.</string>
<string name="permlab_batteryStats">modify battery statistics</string>
<string name="permdesc_batteryStats">Allows the modification of
collected battery statistics. Not for use by normal applications.</string>
<string name="permlab_internalSystemWindow">display unauthorized windows</string>
<string name="permdesc_internalSystemWindow">Allows the creation of
windows that are intended to be used by the internal system
user interface. Not for use by normal applications.</string>
<string name="permlab_systemAlertWindow">display system-level alerts</string>
<string name="permdesc_systemAlertWindow">Allows an application to
show system alert windows. Malicious applications can take over the
entire screen of the phone.</string>
<string name="permlab_setAnimationScale">modify global animation speed</string>
<string name="permdesc_setAnimationScale">Allows an application to change
the global animation speed (faster or slower animations) at any time.</string>
<string name="permlab_manageAppTokens">manage application tokens</string>
<string name="permdesc_manageAppTokens">Allows applications to
create and manage their own tokens, bypassing their normal
Z-ordering. Should never be needed for normal applications.</string>
<string name="permlab_injectEvents">press keys and control buttons</string>
<string name="permdesc_injectEvents">Allows an application to deliver
its own input events (key presses, etc.) to other applications. Malicious
applications can use this to take over the phone.</string>
<string name="permlab_readInputState">record what you type and actions you take</string>
<string name="permdesc_readInputState">Allows applications to watch the
keys you press even when interacting with another application (such
as entering a password). Should never be needed for normal applications.</string>
<string name="permlab_setOrientation">change screen orientation</string>
<string name="permdesc_setOrientation">Allows an application to change
the rotation of the screen at any time. Should never be needed for
normal applications.</string>
<string name="permlab_signalPersistentProcesses">send Linux signals to applications</string>
<string name="permdesc_signalPersistentProcesses">Allows application to request that the
supplied signal be sent to all persistent processes.</string>
<string name="permlab_persistentActivity">make application always run</string>
<string name="permdesc_persistentActivity">Allows an application to make
parts of itself persistent, so the system can't use it for other
applications.</string>
<string name="permlab_deletePackages">delete applications</string>
<string name="permdesc_deletePackages">Allows an application to delete
Android packages. Malicious applications can use this to delete important applications.</string>
<string name="permlab_clearAppUserData">delete other application's data</string>
<string name="permdesc_clearAppUserData">Allows an application to clear user data.</string>
<string name="permlab_deleteCacheFiles">delete other application's cache</string>
<string name="permdesc_deleteCacheFiles">Allows an application to delete
cache files.</string>
<string name="permlab_getPackageSize">measure application storage space</string>
<string name="permdesc_getPackageSize">Allows an application to retrieve
its code, data, and cache sizes</string>
<string name="permlab_installPackages">directly install applications</string>
<string name="permdesc_installPackages">Allows an application to install new or updated
Android packages. Malicious applications can use this to add new applications with arbitrarily
powerful permissions.</string>
<string name="permlab_clearAppCache">delete all application cache data</string>
<string name="permdesc_clearAppCache">Allows an application to free phone storage
by deleting files in application cache directory. Access is very
restricted usually to system process.</string>
<string name="permlab_readLogs">read system log files</string>
<string name="permdesc_readLogs">Allows an application to read from the
system's various log files. This allows it to discover general
information about what you are doing with the phone, but they should
not contain any personal or private information.</string>
<string name="permlab_diagnostic">read/write to resources owned by diag</string>
<string name="permdesc_diagnostic">Allows an application to read and write to
any resource owned by the diag group; for example, files in /dev. This could
potentially affect system stability and security. This should be ONLY be used
for hardware-specific diagnostics by the manufacturer or operator.</string>
<string name="permlab_changeComponentState">enable or disable application components</string>
<string name="permdesc_changeComponentState">Allows an application to change whether a
component of another application is enabled or not. Malicious applications can use this
to disable important phone capabilities. Care must be used with permission, as it is
possible to get application components into an unusable, inconsistant, or unstable state.
</string>
<string name="permlab_setPreferredApplications">set preferred applications</string>
<string name="permdesc_setPreferredApplications">Allows an application to
modify your preferred applications. This can allow malicious applications
to silently change the applications that are run, spoofing your
existing applications to collect private data from you.</string>
<string name="permlab_writeSettings">modify global system settings</string>
<string name="permdesc_writeSettings">Allows an application to modify the
system's settings data. Malicious applications can corrupt your system's
configuration.</string>
<string name="permlab_writeGservices">modify the Google services map</string>
<string name="permdesc_writeGservices">Allows an application to modify the
Google services map. Not for use by normal applications.</string>
<string name="permlab_receiveBootCompleted">automatically start at boot</string>
<string name="permdesc_receiveBootCompleted">Allows an application to
have itself started as soon as the system has finished booting.
This can make it take longer to start the phone and allow the
application to slow down the overall phone by always running.</string>
<string name="permlab_broadcastSticky">send sticky broadcast</string>
<string name="permdesc_broadcastSticky">Allows an application to send
sticky broadcasts, which remain after the broadcast ends.
Malicious applications can make the phone slow or unstable by causing it
to use too much memory.</string>
<string name="permlab_readContacts">read contact data</string>
<string name="permdesc_readContacts">Allows an application to read all
of the contact (address) data stored on your phone. Malicious applications
can use this to send your data to other people.</string>
<string name="permlab_writeContacts">write contact data</string>
<string name="permdesc_writeContacts">Allows an application to modify the
contact (address) data stored on your phone. Malicious
applications can use this to erase or modify your contact data.</string>
<string name="permlab_writeOwnerData">write owner data</string>
<string name="permdesc_writeOwnerData">Allows an application to modify the
phone owner data stored on your phone. Malicious
applications can use this to erase or modify owner data.</string>
<string name="permlab_readOwnerData">read owner data</string>
<string name="permdesc_readOwnerData">Allows an application read the
phone owner data stored on your phone. Malicious
applications can use this to read phone owner data.</string>
<string name="permlab_readCalendar">read calendar data</string>
<string name="permdesc_readCalendar">Allows an application to read all
of the calendar events stored on your phone. Malicious applications
can use this to send your calendar events to other people.</string>
<string name="permlab_writeCalendar">write calendar data</string>
<string name="permdesc_writeCalendar">Allows an application to modify the
calendar events stored on your phone. Malicious
applications can use this to erase or modify your calendar data.</string>
<string name="permlab_accessMockLocation">mock location sources for testing</string>
<string name="permdesc_accessMockLocation">Create mock location sources for testing.
Malicious applications can use this to override the location and/or status returned by real
location sources such as GPS or Network providers.</string>
<string name="permlab_accessLocationExtraCommands">access extra location provider commands</string>
<string name="permdesc_accessLocationExtraCommands">Access extra location provider commands.
Malicious applications could use this to interfere with the operation of the GPS
or other location sources.</string>
<string name="permlab_accessFineLocation">fine (GPS) location</string>
<string name="permdesc_accessFineLocation">Access fine location sources such as the
Global Positioning System on the phone, where available.
Malicious applications can use this to determine where you are, and may
consume additional battery power.</string>
<string name="permlab_accessCoarseLocation">coarse (network-based) location</string>
<string name="permdesc_accessCoarseLocation">Access coarse location sources such as the cellular
network database to determine an approximate phone location, where available. Malicious
applications can use this to determine approximately where you are.</string>
<string name="permlab_accessSurfaceFlinger">access SurfaceFlinger</string>
<string name="permdesc_accessSurfaceFlinger">Allows application to use
SurfaceFlinger low-level features.</string>
<string name="permlab_readFrameBuffer">read frame buffer</string>
<string name="permdesc_readFrameBuffer">Allows application to use
read the content of the frame buffer.</string>
<string name="permlab_modifyAudioSettings">change your audio settings</string>
<string name="permdesc_modifyAudioSettings">Allows application to modify
global audio settings such as volume and routing.</string>
<string name="permlab_recordAudio">record audio</string>
<string name="permdesc_recordAudio">Allows application to access
the audio record path.</string>
<string name="permlab_camera">take pictures</string>
<string name="permdesc_camera">Allows application to take pictures
with the camera. This allows the application at any time to collect
images the camera is seeing.</string>
<string name="permlab_brick">permanently disable phone</string>
<string name="permdesc_brick">Allows the application to
disable the entire phone permanently. This is very dangerous.</string>
<string name="permlab_reboot">force phone reboot</string>
<string name="permdesc_reboot">Allows the application to
force the phone to reboot.</string>
<string name="permlab_mount_unmount_filesystems">mount and unmount filesystems</string>
<string name="permdesc_mount_unmount_filesystems">Allows the application to mount and
unmount filesystems for removable storage.</string>
<string name="permlab_vibrate">control vibrator</string>
<string name="permdesc_vibrate">Allows the application to control
the vibrator.</string>
<string name="permlab_flashlight">control flashlight</string>
<string name="permdesc_flashlight">Allows the application to control
the flashlight.</string>
<string name="permlab_hardware_test">test hardware</string>
<string name="permdesc_hardware_test">Allows the application to control
various peripherals for the purpose of hardware testing.</string>
<string name="permlab_callPhone">directly call phone numbers</string>
<string name="permdesc_callPhone">Allows the application to call
phone numbers without your intervention. Malicious applications may
cause unexpected calls on your phone bill. Note that this does not
allow the application to call emergency numbers.</string>
<string name="permlab_callPrivileged">directly call any phone numbers</string>
<string name="permdesc_callPrivileged">Allows the application to call
any phone number, including emergency numbers, without your intervention.
Malicious applications may place unnecessary and illegal calls to emergency
services.</string>
<string name="permlab_locationUpdates">control location update notifications</string>
<string name="permdesc_locationUpdates">Allows enabling/disabling location
update notifications from the radio. Not for use by normal applications.</string>
<string name="permlab_checkinProperties">access checkin properties</string>
<string name="permdesc_checkinProperties">Allows read/write access to
properties uploaded by the checkin service. Not for use by normal
applications.</string>
<string name="permlab_modifyPhoneState">modify phone state</string>
<string name="permdesc_modifyPhoneState">Allows the application to control the
phone features of the device. An application with this permission can switch
networks, turn the phone radio on and off and the like without ever notifying
you.</string>
<string name="permlab_readPhoneState">read phone state</string>
<string name="permdesc_readPhoneState">Allows the application to access the phone
features of the device. An application with this permission can determine the phone
number of this phone, whether a call is active, the number that call is connected to
and the like.</string>
<string name="permlab_wakeLock">prevent phone from sleeping</string>
<string name="permdesc_wakeLock">Allows an application to prevent
the phone from going to sleep.</string>
<string name="permlab_devicePower">power phone on or off</string>
<string name="permdesc_devicePower">Allows the application to turn the
phone on or off.</string>
<string name="permlab_factoryTest">run in factory test mode</string>
<string name="permdesc_factoryTest">Run as a low-level manufacturer test,
allowing complete access to the phone hardware. Only available
when a phone is running in manufacturer test mode.</string>
<string name="permlab_setWallpaper">set wallpaper</string>
<string name="permdesc_setWallpaper">Allows the application
to set the system wallpaper.</string>
<string name="permlab_setWallpaperHints">set wallpaper size hints</string>
<string name="permdesc_setWallpaperHints">Allows the application
to set the system wallpaper size hints.</string>
<string name="permlab_masterClear">reset system to factory defaults</string>
<string name="permdesc_masterClear">Allows an application to completely
reset the system to its factory settings, erasing all data,
configuration, and installed applications.</string>
<string name="permlab_setTimeZone">set time zone</string>
<string name="permdesc_setTimeZone">Allows an application to change
the phone's time zone.</string>
<string name="permlab_getAccounts">discover known accounts</string>
<string name="permdesc_getAccounts">Allows an application to get
the list of accounts known by the phone.</string>
<string name="permlab_accessNetworkState">view network state</string>
<string name="permdesc_accessNetworkState">Allows an application to view
the state of all networks.</string>
<string name="permlab_createNetworkSockets">full Internet access</string>
<string name="permdesc_createNetworkSockets">Allows an application to
create network sockets.</string>
<string name="permlab_writeApnSettings">write Access Point Name settings</string>
<string name="permdesc_writeApnSettings">Allows an application to modify the APN
settings, such as Proxy and Port of any APN.</string>
<string name="permlab_changeNetworkState">change network connectivity</string>
<string name="permdesc_changeNetworkState">Allows an application to change
the state network connectivity.</string>
<string name="permlab_accessWifiState">view Wi-Fi state</string>
<string name="permdesc_accessWifiState">Allows an application to view
the information about the state of Wi-Fi.</string>
<string name="permlab_changeWifiState">change Wi-Fi state</string>
<string name="permdesc_changeWifiState">Allows an application to connect
to and disconnect from Wi-Fi access points, and to make changes to
configured Wi-Fi networks.</string>
<string name="permlab_bluetoothAdmin">bluetooth administration</string>
<string name="permdesc_bluetoothAdmin">Allows an application to configure
the local Bluetooth phone, and to discover and pair with remote
devices.</string>
<string name="permlab_bluetooth">create Bluetooth connections</string>
<string name="permdesc_bluetooth">Allows an application to view
configuration of the local Bluetooth phone, and to make and accept
connections with paired devices.</string>
<string name="permlab_disableKeyguard">disable keylock</string>
<string name="permdesc_disableKeyguard">Allows an application to disable
the keylock and any associated password security. A legitimate example of
this is the phone disabling the keylock when receiving an incoming phone call,
then re-enabling the keylock when the call is finished.</string>
<string name="permlab_readSyncSettings">read sync settings</string>
<string name="permdesc_readSyncSettings">Allows an application to read the sync settings,
such as whether sync is enabled for Contacts.</string>
<string name="permlab_writeSyncSettings">write sync settings</string>
<string name="permdesc_writeSyncSettings">Allows an application to modify the sync
settings, such as whether sync is enabled for Contacts.</string>
<string name="permlab_readSyncStats">read sync statistics</string>
<string name="permdesc_readSyncStats">Allows an application to read the sync stats; e.g., the
history of syncs that have occurred.</string>
<string name="permlab_subscribedFeedsRead">read subscribed feeds</string>
<string name="permdesc_subscribedFeedsRead">Allows an application to get details about the currently synced feeds.</string>
<string name="permlab_subscribedFeedsWrite">write subscribed feeds</string>
<string name="permdesc_subscribedFeedsWrite">Allows an application to modify
your currently synced feeds. This could allow a malicious application to
change your synced feeds.</string>
<!-- Phone number types from android.provider.Contacts -->
<string-array name="phoneTypes">
<!-- The order of these is important, don't reorder without changing Contacts.java -->
<item>Home</item>
<item>Mobile</item>
<item>Work</item>
<item>Work Fax</item>
<item>Home Fax</item>
<item>Pager</item>
<item>Other</item>
<item>Custom\u2026</item>
</string-array>
<!-- Email address types from android.provider.Contacts -->
<string-array name="emailAddressTypes">
<!-- The order of these is important, don't reorder without changing Contacts.java -->
<item>Home</item>
<item>Work</item>
<item>Other</item>
<item>Custom\u2026</item>
</string-array>
<!-- Phone number types from android.provider.Contacts -->
<string-array name="postalAddressTypes">
<!-- The order of these is important, don't reorder without changing Contacts.java -->
<item>Home</item>
<item>Work</item>
<item>Other</item>
<item>Custom\u2026</item>
</string-array>
<!-- IM types from android.provider.Contacts -->
<string-array name="imAddressTypes">
<!-- The order of these is important, don't reorder without changing Contacts.java -->
<item>Home</item>
<item>Work</item>
<item>Other</item>
<item>Custom\u2026</item>
</string-array>
<!-- Organization types from android.provider.Contacts -->
<string-array name="organizationTypes">
<!-- The order of these is important, don't reorder without changing Contacts.java -->
<item>Home</item>
<item>Work</item>
<item>Other</item>
<item>Custom\u2026</item>
</string-array>
<!-- IM protocols from android.provider.Contacts -->
<string-array name="imProtocols">
<!-- The order of these is important, don't reorder without changing Contacts.java -->
<item>AIM</item>
<item>Windows Live</item>
<item>Yahoo</item>
<item>Skype</item>
<item>QQ</item>
<item>Google Talk</item>
<item>ICQ</item>
<item>Jabber</item>
</string-array>
<!-- Instructions telling the user to enter their pin to unlock the keyguard.
Displayed in one line in a large font. -->
<string name="keyguard_password_enter_pin_code">Enter PIN code:</string>
<!-- Instructions telling the user that they entered the wrong pin while trying
to unlock the keyguard. Displayed in one line in a large font. -->
<string name="keyguard_password_wrong_pin_code">Incorrect PIN code!</string>
<string name="keyguard_label_text">To unlock, press Menu then 0.</string>
<string name="keyguard_password_emergency_instructions">Press the Call button to make an emergency call.</string>
<string name="keyguard_password_instructions">Enter passcode or dial emergency number.</string>
<!-- Emergency call strings. -->
<string name="emergency_call_dialog_text">Make an emergency call?</string>
<string name="emergency_call_dialog_cancel">Cancel</string>
<string name="emergency_call_dialog_call">Emergency call</string>
<string name="emergency_call_dialog_number_for_display">Emergency number</string>
<string name="emergency_call_number_uri">tel:112</string>
<!--
*** touch based lock / unlock ***
-->
<!-- the key used to look up the carrier name from system properties -->
<string name="lockscreen_carrier_key">gsm.operator.alpha</string>
<!-- the default display if there is no carrier (no service) -->
<string name="lockscreen_carrier_default">(No service)</string>
<string name="lockscreen_screen_locked">Screen locked</string>
<!-- when pattern lock is enabled, tell them about the emergency dial -->
<string name="lockscreen_instructions_when_pattern_enabled">Press Menu to unlock or place emergency call.</string>
<!-- when pattern lock is disabled, only tell them to press menu to unlock -->
<string name="lockscreen_instructions_when_pattern_disabled">Press Menu to unlock.</string>
<string name="lockscreen_pattern_instructions">Draw pattern to unlock:</string>
<string name="lockscreen_emergency_call">Emergency call</string>
<string name="lockscreen_pattern_correct">Correct!</string>
<string name="lockscreen_pattern_wrong">Sorry, try again:</string>
<!-- When the lock screen is showing and the phone plugged in, show the current
charge %-->
<string name="lockscreen_plugged_in">Charging (<xliff:g id="number">%d%%</xliff:g>)</string>
<!-- When the lock screen is showing and the battery is low, warn user to plug
in the phone soon. -->
<string name="lockscreen_low_battery">Connect your charger.</string>
<string name="lockscreen_missing_sim_message_short">No SIM card.</string>
<string name="lockscreen_missing_sim_message">No SIM card in phone.</string>
<string name="lockscreen_missing_sim_instructions">Please insert a SIM card.</string>
<!-- When the user inserts a sim card from an unsupported network, it becomes network
locked -->
<string name="lockscreen_network_locked_message">Network locked</string>
<!-- When the user enters a wrong sim pin too many times, it becomes
PUK locked (Pin Unlock Kode) -->
<string name="lockscreen_sim_puk_locked_message">SIM card is PUK-locked.</string>
<string name="lockscreen_sim_puk_locked_instructions">Please contact Customer Care.</string>
<string name="lockscreen_sim_locked_message">SIM card is locked.</string>
<!-- When the user enters a sim unlock code, it takes a little while to check
whether it is valid, and to unlock the sim if it is valid. we display a
progress dialog in the meantime -->
<string name="lockscreen_sim_unlock_progress_dialog_message">Unlocking SIM card\u2026</string>
<string name="lockscreen_too_many_failed_attempts_dialog_title">Lock pattern warning</string>
<!-- Information message shown in dialog when user has too many failed attempts -->
<string name="lockscreen_too_many_failed_attempts_dialog_message">
You have incorrectly drawn your unlock pattern <xliff:g id="number">%d</xliff:g> times.
\n\nPlease try again in <xliff:g id="number">%d</xliff:g> seconds.
</string>
<!-- Information message shown in dialog when user is almost at the limit
where they will be locked out and have to use their google login -->
<string name="lockscreen_failed_attempts_almost_glogin">
You have incorrectly drawn your unlock pattern <xliff:g id="number">%d</xliff:g> times.
After <xliff:g id="number">%d</xliff:g> more unsuccessful attempts,
you will be asked to unlock your phone using your Google sign-in.\n\n
Please try again in <xliff:g id="number">%d</xliff:g> seconds.
</string>
<!-- Countdown message shown while user is waiting to try again after too many
failed attempts -->
<string name="lockscreen_too_many_failed_attempts_countdown">Try again in <xliff:g id="number">%d</xliff:g> seconds.</string>
<!-- Message shown on button that appears once it's apparent the user may have forgotten
their lock gesture -->
<string name="lockscreen_forgot_pattern_button_text">Forgot pattern?</string>
<!-- glogin unlock screen -->
<string name="lockscreen_glogin_too_many_attempts">Too many pattern attempts!</string>
<string name="lockscreen_glogin_instructions">To unlock,\nsign in with your Google account:</string>
<string name="lockscreen_glogin_username_hint">Username (email)</string>
<string name="lockscreen_glogin_password_hint">Password</string>
<string name="lockscreen_glogin_submit_button">Sign in</string>
<string name="lockscreen_glogin_invalid_input">Invalid username or password.</string>
<string name="date_picker_set">Set</string>
<string name="date_picker_month">month</string>
<string name="time_picker_set">Set</string>
<string name="status_bar_date_format">"<xliff:g id="format">MMMM d, yyyy</xliff:g>"</string>
<string name="status_bar_time_format">"<xliff:g id="format">h:mm AA</xliff:g>"</string>
<!-- The text for the button in the notification window-shade that clears
all of the currently visible notifications. -->
<string name="status_bar_clear_all_button">Clear notifications</string>
<!-- The label in the bar at the top of the status bar when there are no notifications
showing. -->
<string name="status_bar_no_notifications_title">No notifications</string>
<!-- The label for the group of notifications for ongoing events in the opened version of
the status bar. An ongoing call is the prime example of this. The MP3 music player
might be another example. -->
<string name="status_bar_ongoing_events_title">Ongoing</string>
<!-- The label for the group of notifications for recent events in the opened version of
the status bar. Recently received text messsages (SMS), emails, calendar alerts, etc. -->
<string name="status_bar_latest_events_title">Notifications</string>
<!-- The label for column of application icons in the opened version of the status bar -->
<string name="status_bar_applications_title">Application</string>
<!-- The big percent text in the middle of the battery icon that appears when you plug in
the charger. -->
<string name="battery_status_text_percent_format"><xliff:g id="number">%d%%</xliff:g></string>
<!-- The big percent text in the middle of the battery icon that appears when you plug in
the charger. -->
<string name="battery_status_charging">Charging\u2026</string>
<!-- The title of the low battery alert. -->
<string name="battery_low_title">Please connect charger</string>
<!-- The subtitle of the low battery alert. -->
<string name="battery_low_subtitle">The battery is getting low:</string>
<!-- A message that appears when the battery level is getting low. -->
<string name="battery_low_percent_format">less than <xliff:g id="number">%d%%</xliff:g>
remaining.</string>
<string name="factorytest_failed">Factory test failed</string>
<string name="factorytest_not_system">The FACTORY_TEST action
is only supported for packages installed in /system/app.</string>
<string name="factorytest_no_action">No package was found that provides the
FACTORY_TEST action.</string>
<string name="factorytest_reboot">Reboot</string>
<!-- WebView User Agent -->
<string name="web_user_agent"><xliff:g id="x">Mozilla/5.0 (Linux; U; Android %s)
AppleWebKit/525.10+ (KHTML, like Gecko) Version/3.0.4 Mobile Safari/523.12.2</xliff:g></string>
<!-- WebView save password dialog -->
<string name="save_password_label">Confirm</string>
<string name="save_password_message">Do you want the browser to remember this password?</string>
<string name="save_password_notnow">Not now</string>
<string name="save_password_remember">Remember</string>
<!-- should be "Never for this site". But it is too long, use "Never" instead -->
<string name="save_password_never">Never</string>
<!-- WebView permission -->
<string name="open_permission_deny">You do not have permission to open this page.</string>
<!-- WebView copy text-->
<string name="text_copied">Text copied to clipboard.</string>
<string name="more_item_label">More</string>
<string name="prepend_shortcut_label">Menu+</string>
<string name="menu_space_shortcut_label">space</string>
<string name="menu_enter_shortcut_label">enter</string>
<string name="menu_delete_shortcut_label">delete</string>
<!-- Strings used for search bar -->
<string name="search_go">Search</string>
<!-- Strings used to display the date -->
<string name="today">Today</string>
<string name="before">Before</string>
<string name="yesterday">Yesterday</string>
<string name="tomorrow">Tomorrow</string>
<string name="ago">ago</string>
<string name="in">in</string>
<string name="daysDurationFuturePlural">in <xliff:g id="days">%d</xliff:g> days</string>
<string name="daysDurationPastPlural"><xliff:g id="days">%d</xliff:g> days ago</string>
<string name="oneMonthDurationPast">1 month ago</string>
<!-- Prepositions for dates ("on May 29", "in 2008", "at 2:33am") -->
<string name="preposition_for_date">on %s</string>
<string name="preposition_for_time">at %s</string>
<string name="preposition_for_year">in %s</string>
<string name="day">day</string>
<string name="days">days</string>
<string name="hour">hour</string>
<string name="hours">hours</string>
<string name="minute">min</string>
<string name="minutes">mins</string>
<string name="second">sec</string>
<string name="seconds">secs</string>
<string name="week">week</string>
<string name="weeks">weeks</string>
<string name="year">year</string>
<string name="years">years</string>
<string name="sunday">Sunday</string>
<string name="monday">Monday</string>
<string name="tuesday">Tuesday</string>
<string name="wednesday">Wednesday</string>
<string name="thursday">Thursday</string>
<string name="friday">Friday</string>
<string name="saturday">Saturday</string>
<!-- Date formats for single line display mode -->
<string name="daily_format">h:mm aa</string>
<string name="weekly_format">MMM d</string>
<string name="monthly_format">MMM d</string>
<string name="yearly_format">yyyy</string>
<!-- TODO
Maybe the "mon-fri" part should be parameterized? That is, it should be something like
"%1$s \u2013 %2$s" and then the code that uses this resource can substitute in the local
3-letter abbreviation.
-->
<string name="every_weekday">"Every weekday (Mon\u2013Fri)"</string>
<string name="daily">Daily</string>
<string name="weekly">"Weekly on <xliff:g id="day">%s</xliff:g>"</string>
<string name="monthly">Monthly</string>
<string name="yearly">Yearly</string>
<!-- Errors for android.widget.VideoView -->
<string name="VideoView_error_title">Cannot play video</string>
<string name="VideoView_error_text_unknown">Sorry, this video cannot be played.</string>
<string name="VideoView_error_button">OK</string>
<!-- AM - as in morning - as in 10:30 AM -->
<string name="am">"AM"</string>
<!-- PM - as in afternoon - as in 10:30 PM -->
<string name="pm">"PM"</string>
<!-- Example: "12/31/2007" -->
<string name="numeric_date">"<xliff:g id="format">%m/%d/%Y</xliff:g>"</string>
<!-- Example: "Mon, Dec 31, 2007, 8am - Tue, Jan 1, 2008, 5pm" -->
<!-- 1: "Mon" -->
<!-- 2: "Dec 31, 2007" -->
<!-- 3: "8am" -->
<!-- 4: "Tue" -->
<!-- 5: "Jan 1, 2008" -->
<!-- 6: "5pm" -->
<!-- or: "Friday, November 30, 8am - Thursday, December 6, 5pm" -->
<!-- 1: "Friday" -->
<!-- 2: "November 30" -->
<!-- 3: "8am" -->
<!-- 4: "Thursday" -->
<!-- 5: "December 6" -->
<!-- 6: "5pm" -->
<string name="wday1_date1_time1_wday2_date2_time2">"<xliff:g id="format">%1$s, %2$s, %3$s \u2013 %4$s, %5$s, %6$s</xliff:g>"</string>
<!-- Example: "Mon, Dec 31, 2007 - Tue, Jan 1, 2008" -->
<!-- 1: "Mon" -->
<!-- 2: "Dec 31, 2007" -->
<!-- 4: "Tue" -->
<!-- 5: "Jan 1, 2008" -->
<!-- or: "Friday, November 30 - Thursday, December 6" -->
<!-- 1: "Friday" -->
<!-- 2: "November 30" -->
<!-- 4: "Thursday" -->
<!-- 5: "December 6" -->
<string name="wday1_date1_wday2_date2">"<xliff:g id="format">%1$s, %2$s \u2013 %4$s, %5$s</xliff:g>"</string>
<!-- Example: "Dec 31, 2007, 8am - Jan 1, 2008, 5pm" -->
<!-- 2: "Dec 31, 2007" -->
<!-- 3: "8am" -->
<!-- 5: "Jan 1, 2008" -->
<!-- 6: "5pm" -->
<!-- or: "November 30, 8am - December 6, 5pm" -->
<!-- 2: "November 30" -->
<!-- 3: "8am" -->
<!-- 5: "December 6" -->
<!-- 6: "5pm" -->
<string name="date1_time1_date2_time2">"<xliff:g id="format">%2$s, %3$s \u2013 %5$s, %6$s</xliff:g>"</string>
<!-- Example: "Dec 31, 2007 - Jan 1, 2008" -->
<!-- 2: "Dec 31, 2007" -->
<!-- 5: "Jan 1, 2008" -->
<!-- or: "November 30 - December 6" -->
<!-- 2: "November 30" -->
<!-- 5: "December 6" -->
<string name="date1_date2">"<xliff:g id="format">%2$s \u2013 %5$s</xliff:g>"</string>
<!-- Example: "10:00 - 11:00 am" -->
<!-- 1: "10:00" -->
<!-- 2: "11:00 am" -->
<!-- or: "10:00 am - 2:00 pm" -->
<!-- 1: "10:00 am" -->
<!-- 2: "2:00 pm" -->
<!-- or: "10:00 - 14:00" -->
<!-- 1: "10:00" -->
<!-- 2: "14:00" -->
<string name="time1_time2">"<xliff:g id="format">%1$s \u2013 %2$s</xliff:g>"</string>
<!-- Example: "8:00 - 11:00 am, Mon, Dec 31, 2007" -->
<!-- 1: "8:00 - 11:00 am" -->
<!-- 2: "Mon" -->
<!-- 3: "Dec 31, 2007" -->
<string name="time_wday_date">"<xliff:g id="format">%1$s, %2$s, %3$s</xliff:g>"</string>
<!-- Example: "Mon, Dec 31, 2007" -->
<!-- 2: "Mon" -->
<!-- 3: "Dec 31, 2007" -->
<string name="wday_date">"<xliff:g id="format">%2$s, %3$s</xliff:g>"</string>
<!-- Example: "8:00 - 11:00 am, Dec 31, 2007" -->
<!-- 1: "8:00 - 11:00 am" -->
<!-- 3: "Dec 31, 2007" -->
<string name="time_date">"<xliff:g id="format">%1$s, %3$s</xliff:g>"</string>
<!-- Example: "8:00 - 11:00 am, Mon" -->
<!-- 1: "8:00 - 11:00 am" -->
<!-- 2: "Mon" -->
<string name="time_wday">"<xliff:g id="format">%1$s, %2$s</xliff:g>"</string>
<string name="noon">"noon"</string>
<string name="Noon">"Noon"</string>
<string name="midnight">"midnight"</string>
<string name="Midnight">"Midnight"</string>
<!-- Example: "October 9" -->
<string name="month_day">"<xliff:g id="format">%B %-d</xliff:g>"</string>
<!-- Example: "October" -->
<string name="month">"<xliff:g id="format">%B</xliff:g>"</string>
<!-- Example: "October 9, 2007" -->
<string name="month_day_year">"<xliff:g id="format">%B %-d, %Y</xliff:g>"</string>
<!-- Example: "October 2007" -->
<string name="month_year">"<xliff:g id="format">%B %Y</xliff:g>"</string>
<!-- Example: "Oct 31 - Nov 3" -->
<!-- 2: "Oct" -->
<!-- 3: "31" -->
<!-- 7: "Nov" -->
<!-- 8: "3" -->
<string name="same_year_md1_md2">"<xliff:g id="format">%2$s %3$s \u2013 %7$s %8$s</xliff:g>"</string>
<!-- Example: "Wed, Oct 31 - Sat, Nov 3" -->
<!-- 1: "Wed" -->
<!-- 2: "Oct" -->
<!-- 3: "31" -->
<!-- 6: "Sat" -->
<!-- 7: "Nov" -->
<!-- 8: "3" -->
<string name="same_year_wday1_md1_wday2_md2">"<xliff:g id="format">%1$s, %2$s %3$s \u2013 %6$s, %7$s %8$s</xliff:g>"</string>
<!-- Example: "Oct 31 - Nov 3, 2007" -->
<!-- 2: "Oct" -->
<!-- 3: "31" -->
<!-- 7: "Nov" -->
<!-- 8: "3" -->
<!-- 9: "2007" -->
<string name="same_year_mdy1_mdy2">"<xliff:g id="format">%2$s %3$s \u2013 %7$s %8$s, %9$s</xliff:g>"</string>
<!-- Example: "Wed, Oct 31 - Sat, Nov 3, 2007" -->
<!-- 1: "Wed" -->
<!-- 2: "Oct" -->
<!-- 3: "31" -->
<!-- 6: "Sat" -->
<!-- 7: "Nov" -->
<!-- 8: "3" -->
<!-- 9: "2007" -->
<string name="same_year_wday1_mdy1_wday2_mdy2">"<xliff:g id="format">%1$s, %2$s %3$s \u2013 %6$s, %7$s %8$s, %9$s</xliff:g>"</string>
<!-- Example: "Oct 31, 8:00am - Nov 3, 5:00pm" -->
<!-- 2: "Oct" -->
<!-- 3: "31" -->
<!-- 5: "8:00am" -->
<!-- 7: "Nov" -->
<!-- 8: "3" -->
<!-- 10: "5:00pm" -->
<string name="same_year_md1_time1_md2_time2">"<xliff:g id="format">%2$s %3$s, %5$s \u2013 %7$s %8$s, %10$s</xliff:g>"</string>
<!-- Example: "Wed, Oct 31, 8:00am - Sat, Nov 3, 5:00pm" -->
<!-- 1: "Wed" -->
<!-- 2: "Oct" -->
<!-- 3: "31" -->
<!-- 5: "8:00am" -->
<!-- 6: "Sat" -->
<!-- 7: "Nov" -->
<!-- 8: "3" -->
<!-- 10: "5:00pm" -->
<string name="same_year_wday1_md1_time1_wday2_md2_time2">"<xliff:g id="format">%1$s, %2$s %3$s, %5$s \u2013 %6$s, %7$s %8$s, %10$s</xliff:g>"</string>
<!-- Example: "Oct 31, 2007, 8:00am - Nov 3, 2007, 5:00pm" -->
<!-- 2: "Oct" -->
<!-- 3: "31" -->
<!-- 4: "2007" -->
<!-- 5: "8:00am" -->
<!-- 7: "Nov" -->
<!-- 8: "3" -->
<!-- 9: "2007" -->
<!-- 10: "5:00pm" -->
<string name="same_year_mdy1_time1_mdy2_time2">"<xliff:g id="format">%2$s %3$s, %4$s, %5$s \u2013 %7$s %8$s, %9$s, %10$s</xliff:g>"</string>
<!-- Example: "Wed, Oct 31, 2007, 8:00am - Sat, Nov 3, 2007, 5:00pm" -->
<!-- 1: "Wed" -->
<!-- 2: "Oct" -->
<!-- 3: "31" -->
<!-- 4: "2007" -->
<!-- 5: "8:00am" -->
<!-- 6: "Sat" -->
<!-- 7: "Nov" -->
<!-- 8: "3" -->
<!-- 9: "2007" -->
<!-- 10: "5:00pm" -->
<string name="same_year_wday1_mdy1_time1_wday2_mdy2_time2">"<xliff:g id="format">%1$s, %2$s %3$s, %4$s, %5$s \u2013 %6$s, %7$s %8$s, %9$s, %10$s</xliff:g>"</string>
<!-- Example: "10/31 - 11/3" -->
<!-- 2: "10" -->
<!-- 3: "31" -->
<!-- 7: "11" -->
<!-- 8: "3" -->
<string name="numeric_md1_md2">"<xliff:g id="format">%2$s/%3$s \u2013 %7$s/%8$s</xliff:g>"</string>
<!-- Example: "Wed, 10/31 - Sat, 11/3" -->
<!-- 1: "Wed" -->
<!-- 2: "10" -->
<!-- 3: "31" -->
<!-- 6: "Sat" -->
<!-- 7: "11" -->
<!-- 8: "3" -->
<string name="numeric_wday1_md1_wday2_md2">"<xliff:g id="format">%1$s, %2$s/%3$s \u2013 %6$s, %7$s/%8$s</xliff:g>"</string>
<!-- Example: "10/31/2007 - 11/3/2007" -->
<!-- 2: "10" -->
<!-- 3: "31" -->
<!-- 4: "2007" -->
<!-- 7: "11" -->
<!-- 8: "3" -->
<!-- 9: "2007" -->
<string name="numeric_mdy1_mdy2">"<xliff:g id="format">%2$s/%3$s/%4$s \u2013 %7$s/%8$s/%9$s</xliff:g>"</string>
<!-- Example: "Wed, 10/31/2007 - Sat, 11/3/2007" -->
<!-- 1: "Wed" -->
<!-- 2: "10" -->
<!-- 3: "31" -->
<!-- 4: "2007" -->
<!-- 6: "Sat" -->
<!-- 7: "11" -->
<!-- 8: "3" -->
<!-- 9: "2007" -->
<string name="numeric_wday1_mdy1_wday2_mdy2">"<xliff:g id="format">%1$s, %2$s/%3$s/%4$s \u2013 %6$s, %7$s/%8$s/%9$s</xliff:g>"</string>
<!-- Example: "10/31, 8:00am - 11/3, 5:00pm" -->
<!-- 2: "10" -->
<!-- 3: "31" -->
<!-- 5: "8:00am" -->
<!-- 7: "11" -->
<!-- 8: "3" -->
<!-- 10: "5:00pm" -->
<string name="numeric_md1_time1_md2_time2">"<xliff:g id="format">%2$s/%3$s, %5$s \u2013 %7$s/%8$s, %10$s</xliff:g>"</string>
<!-- Example: "Wed, 10/31, 8:00am - Sat, 11/3, 5:00pm" -->
<!-- 1: "Wed" -->
<!-- 2: "10" -->
<!-- 3: "31" -->
<!-- 5: "8:00am" -->
<!-- 6: "Sat" -->
<!-- 7: "11" -->
<!-- 8: "3" -->
<!-- 10: "5:00pm" -->
<string name="numeric_wday1_md1_time1_wday2_md2_time2">"<xliff:g id="format">%1$s, %2$s/%3$s, %5$s \u2013 %6$s, %7$s/%8$s, %10$s</xliff:g>"</string>
<!-- Example: "10/31/2007, 8:00am - 11/3/2007, 5:00pm" -->
<!-- 2: "10" -->
<!-- 3: "31" -->
<!-- 4: "2007" -->
<!-- 5: "8:00am" -->
<!-- 7: "11" -->
<!-- 8: "3" -->
<!-- 9: "2007" -->
<!-- 10: "5:00pm" -->
<string name="numeric_mdy1_time1_mdy2_time2">"<xliff:g id="format">%2$s/%3$s/%4$s, %5$s \u2013 %7$s/%8$s/%9$s, %10$s</xliff:g>"</string>
<!-- Example: "Wed, 10/31/2007, 8:00am - Sat, 11/3/2007, 5:00pm" -->
<!-- 1: "Wed" -->
<!-- 2: "10" -->
<!-- 3: "31" -->
<!-- 4: "2007" -->
<!-- 5: "8:00am" -->
<!-- 6: "Sat" -->
<!-- 7: "11" -->
<!-- 8: "3" -->
<!-- 9: "2007" -->
<!-- 10: "5:00pm" -->
<string name="numeric_wday1_mdy1_time1_wday2_mdy2_time2">"<xliff:g id="format">%1$s, %2$s/%3$s/%4$s, %5$s \u2013 %6$s, %7$s/%8$s/%9$s, %10$s</xliff:g>"</string>
<!-- Example: "Oct 9 - 10" -->
<!-- 2: "Oct" -->
<!-- 3: "9" -->
<!-- 8: "10" -->
<string name="same_month_md1_md2">"<xliff:g id="format">%2$s %3$s \u2013 %8$s</xliff:g>"</string>
<!-- Example: "Tue, Oct 9 - Wed, Oct 10" -->
<!-- 1: "Tue" -->
<!-- 2: "Oct" -->
<!-- 3: "9" -->
<!-- 6: "Wed" -->
<!-- 7: "Oct" -->
<!-- 8: "10" -->
<string name="same_month_wday1_md1_wday2_md2">"<xliff:g id="format">%1$s, %2$s %3$s \u2013 %6$s, %7$s %8$s</xliff:g>"</string>
<!-- Example: "Oct 9 - 10, 2007" -->
<!-- 2: "Oct" -->
<!-- 3: "9" -->
<!-- 8: "10" -->
<!-- 9: "2007" -->
<string name="same_month_mdy1_mdy2">"<xliff:g id="format">%2$s %3$s \u2013 %8$s, %9$s</xliff:g>"</string>
<!-- Example: "Tue, Oct 9, 2007 - Wed, Oct 10, 2007" -->
<!-- 1: "Tue" -->
<!-- 2: "Oct" -->
<!-- 3: "9" -->
<!-- 4: "2007" -->
<!-- 6: "Wed" -->
<!-- 7: "Oct" -->
<!-- 8: "10" -->
<!-- 9: "2007" -->
<string name="same_month_wday1_mdy1_wday2_mdy2">"<xliff:g id="format">%1$s, %2$s %3$s, %4$s \u2013 %6$s, %7$s %8$s, %9$s</xliff:g>"</string>
<!-- Example: "Oct 9, 8:00am - Oct 10, 5:00pm" -->
<!-- 2: "Oct" -->
<!-- 3: "9" -->
<!-- 5: "8:00am" -->
<!-- 7: "Oct" -->
<!-- 8: "10" -->
<!-- 10: "5:00pm" -->
<string name="same_month_md1_time1_md2_time2">"<xliff:g id="format">%2$s %3$s, %5$s \u2013 %7$s %8$s, %10$s</xliff:g>"</string>
<!-- Example: "Tue, Oct 9, 8:00am - Wed, Oct 10, 5:00pm" -->
<!-- 1: "Tue" -->
<!-- 2: "Oct" -->
<!-- 3: "9" -->
<!-- 5: "8:00am" -->
<!-- 6: "Wed" -->
<!-- 7: "Oct" -->
<!-- 8: "10" -->
<!-- 10: "5:00pm" -->
<string name="same_month_wday1_md1_time1_wday2_md2_time2">"<xliff:g id="format">%1$s, %2$s %3$s, %5$s \u2013 %6$s, %7$s %8$s, %10$s</xliff:g>"</string>
<!-- Example: "Oct 9, 2007, 8:00am - Oct 10, 2007, 5:00pm" -->
<!-- 2: "Oct" -->
<!-- 3: "9" -->
<!-- 4: "2007" -->
<!-- 5: "8:00am" -->
<!-- 7: "Oct" -->
<!-- 8: "10" -->
<!-- 9: "2007" -->
<!-- 10: "5:00pm" -->
<string name="same_month_mdy1_time1_mdy2_time2">"<xliff:g id="format">%2$s %3$s, %4$s, %5$s \u2013 %7$s %8$s, %9$s, %10$s</xliff:g>"</string>
<!-- Example: "Tue, Oct 9, 2007, 8:00am - Wed, Oct 10, 2007, 5:00pm" -->
<!-- 1: "Tue" -->
<!-- 2: "Oct" -->
<!-- 3: "9" -->
<!-- 4: "2007" -->
<!-- 5: "8:00am" -->
<!-- 6: "Wed" -->
<!-- 7: "Oct" -->
<!-- 8: "10" -->
<!-- 9: "2007" -->
<!-- 10: "5:00pm" -->
<string name="same_month_wday1_mdy1_time1_wday2_mdy2_time2">"<xliff:g id="format">%1$s, %2$s %3$s, %4$s, %5$s \u2013 %6$s, %7$s %8$s, %9$s, %10$s</xliff:g>"</string>
<!-- Example: "Oct 9, 2007" -->
<string name="abbrev_month_day_year">"<xliff:g id="format">%b %-d, %Y</xliff:g>"</string>
<!-- Example: "Oct 2007" -->
<string name="abbrev_month_year">"<xliff:g id="format">%b %Y</xliff:g>"</string>
<!-- Example: "Oct 9" -->
<string name="abbrev_month_day">"<xliff:g id="format">%b %-d</xliff:g>"</string>
<!-- Example: "Oct" -->
<string name="abbrev_month">"<xliff:g id="format">%b</xliff:g>"</string>
<!-- Example: the dash in Tue, Oct 9, 2007, 8:00am - Wed, Oct 10, 2007, 5:00pm -->
<string name="date_range_separator">" \u2013 "</string>
<!-- Example: "10/09/2007" -->
<string name="numeric_date_notation">"<xliff:g id="format">%m/%d/%y</xliff:g>"</string>
<!-- The full spelled out version of the day of the week. -->
<string name="day_of_week_long_sunday">Sunday</string>
<!-- The full spelled out version of the day of the week. -->
<string name="day_of_week_long_monday">Monday</string>
<!-- The full spelled out version of the day of the week. -->
<string name="day_of_week_long_tuesday">Tuesday</string>
<!-- The full spelled out version of the day of the week. -->
<string name="day_of_week_long_wednesday">Wednesday</string>
<!-- The full spelled out version of the day of the week. -->
<string name="day_of_week_long_thursday">Thursday</string>
<!-- The full spelled out version of the day of the week. -->
<string name="day_of_week_long_friday">Friday</string>
<!-- The full spelled out version of the day of the week. -->
<string name="day_of_week_long_saturday">Saturday</string>
<!-- An abbreviated day of the week. Three characters typically in western languages.
In US English: "Sun" stands for Sunday -->
<string name="day_of_week_medium_sunday">Sun</string>
<!-- An abbreviated day of the week. Three characters typically in western languages.
In US English: "Mon" stands for Monday -->
<string name="day_of_week_medium_monday">Mon</string>
<!-- An abbreviated day of the week. Three characters typically in western languages.
In US English: "Tue" stands for Tuesday -->
<string name="day_of_week_medium_tuesday">Tue</string>
<!-- An abbreviated day of the week. Three characters typically in western languages.
In US English: "Wed" stands for Wednesday -->
<string name="day_of_week_medium_wednesday">Wed</string>
<!-- An abbreviated day of the week. Three characters typically in western languages.
In US English: "Thu" stands for Thursday -->
<string name="day_of_week_medium_thursday">Thu</string>
<!-- An abbreviated day of the week. Three characters typically in western languages.
In US English: "Fri" stands for Friday -->
<string name="day_of_week_medium_friday">Fri</string>
<!-- An abbreviated day of the week. Three characters typically in western languages.
In US English: "Sat" stands for Saturday -->
<string name="day_of_week_medium_saturday">Sat</string>
<!-- An abbreviated day of the week. Two characters typically in western languages.
In US English: "Su" stands for Sunday -->
<string name="day_of_week_short_sunday">Su</string>
<!-- An abbreviated day of the week. Two characters typically in western languages.
In US English: "Mo" stands for Monday -->
<string name="day_of_week_short_monday">Mo</string>
<!-- An abbreviated day of the week. Two characters typically in western languages.
In US English: "Tu" stands for Tuesday -->
<string name="day_of_week_short_tuesday">Tu</string>
<!-- An abbreviated day of the week. Two characters typically in western languages.
In US English: "We" stands for Wednesday -->
<string name="day_of_week_short_wednesday">We</string>
<!-- An abbreviated day of the week. Two characters typically in western languages.
In US English: "Th" stands for Thursday -->
<string name="day_of_week_short_thursday">Th</string>
<!-- An abbreviated day of the week. Two characters typically in western languages.
In US English: "Fr" stands for Friday -->
<string name="day_of_week_short_friday">Fr</string>
<!-- An abbreviated day of the week. Two characters typically in western languages.
In US English: "Sa" stands for Saturday -->
<string name="day_of_week_short_saturday">Sa</string>
<!-- An abbreviated day of the week. One character if that is unique. Two if necessary.
In US English: "Su" stands for Sunday -->
<string name="day_of_week_shorter_sunday">Su</string>
<!-- An abbreviated day of the week. One character if that is unique. Two if necessary.
In US English: "M" stands for Monday -->
<string name="day_of_week_shorter_monday">M</string>
<!-- An abbreviated day of the week. One character if that is unique. Two if necessary.
In US English: "Tu" stands for Tuesday -->
<string name="day_of_week_shorter_tuesday">Tu</string>
<!-- An abbreviated day of the week. One character if that is unique. Two if necessary.
In US English: "W" stands for Wednesday -->
<string name="day_of_week_shorter_wednesday">W</string>
<!-- An abbreviated day of the week. One character if that is unique. Two if necessary.
In US English: "Th" stands for Thursday -->
<string name="day_of_week_shorter_thursday">Th</string>
<!-- An abbreviated day of the week. One character if that is unique. Two if necessary.
In US English: "F" stands for Friday -->
<string name="day_of_week_shorter_friday">F</string>
<!-- An abbreviated day of the week. One character if that is unique. Two if necessary.
In US English: "Sa" stands for Saturday -->
<string name="day_of_week_shorter_saturday">Sa</string>
<!-- An abbreviated day of the week. One character long if it makes sense. Does not have
to be unique.
In US English: "S" stands for Sunday -->
<string name="day_of_week_shortest_sunday">S</string>
<!-- An abbreviated day of the week. One character long if it makes sense. Does not have
to be unique.
In US English: "M" stands for Monday -->
<string name="day_of_week_shortest_monday">M</string>
<!-- An abbreviated day of the week. One character long if it makes sense. Does not have
to be unique.
In US English: "T" stands for Tuesday -->
<string name="day_of_week_shortest_tuesday">T</string>
<!-- An abbreviated day of the week. One character long if it makes sense. Does not have
to be unique.
In US English: "W" stands for Wednesday -->
<string name="day_of_week_shortest_wednesday">W</string>
<!-- An abbreviated day of the week. One character long if it makes sense. Does not have
to be unique.
In US English: "T" stands for Thursday -->
<string name="day_of_week_shortest_thursday">T</string>
<!-- An abbreviated day of the week. One character long if it makes sense. Does not have
to be unique.
In US English: "F" stands for Friday -->
<string name="day_of_week_shortest_friday">F</string>
<!-- An abbreviated day of the week. One character long if it makes sense. Does not have
to be unique.
In US English: "S" stands for Saturday -->
<string name="day_of_week_shortest_saturday">S</string>
<!-- The full spelled out version of the month. -->
<string name="month_long_january">January</string>
<!-- The full spelled out version of the month. -->
<string name="month_long_february">February</string>
<!-- The full spelled out version of the month. -->
<string name="month_long_march">March</string>
<!-- The full spelled out version of the month. -->
<string name="month_long_april">April</string>
<!-- The full spelled out version of the month. -->
<string name="month_long_may">May</string>
<!-- The full spelled out version of the month. -->
<string name="month_long_june">June</string>
<!-- The full spelled out version of the month. -->
<string name="month_long_july">July</string>
<!-- The full spelled out version of the month. -->
<string name="month_long_august">August</string>
<!-- The full spelled out version of the month. -->
<string name="month_long_september">September</string>
<!-- The full spelled out version of the month. -->
<string name="month_long_october">October</string>
<!-- The full spelled out version of the month. -->
<string name="month_long_november">November</string>
<!-- The full spelled out version of the month. -->
<string name="month_long_december">December</string>
<!-- An abbreviated month name.
In US English: "Jan" stands for January. -->
<string name="month_medium_january">Jan</string>
<!-- An abbreviated month name.
In US English: "Feb" stands for February. -->
<string name="month_medium_february">Feb</string>
<!-- An abbreviated month name.
In US English: "Mar" stands for March. -->
<string name="month_medium_march">Mar</string>
<!-- An abbreviated month name.
In US English: "Apr" stands for April. -->
<string name="month_medium_april">Apr</string>
<!-- An abbreviated month name.
In US English: "May" stands for May. -->
<string name="month_medium_may">May</string>
<!-- An abbreviated month name.
In US English: "Jun" stands for June. -->
<string name="month_medium_june">Jun</string>
<!-- An abbreviated month name.
In US English: "Jul" stands for July. -->
<string name="month_medium_july">Jul</string>
<!-- An abbreviated month name.
In US English: "Aug" stands for August. -->
<string name="month_medium_august">Aug</string>
<!-- An abbreviated month name.
In US English: "Sep" stands for September. -->
<string name="month_medium_september">Sep</string>
<!-- An abbreviated month name.
In US English: "Oct" stands for October. -->
<string name="month_medium_october">Oct</string>
<!-- An abbreviated month name.
In US English: "Nov" stands for November. -->
<string name="month_medium_november">Nov</string>
<!-- An abbreviated month name.
In US English: "Dec" stands for December. -->
<string name="month_medium_december">Dec</string>
<!-- An abbreviated month name. One character long if it makes sense. Does not have
to be unique.
In US English: "J" stands for January -->
<string name="month_shortest_january">J</string>
<!-- An abbreviated month name. One character long if it makes sense. Does not have
to be unique.
In US English: "F" stands for February. -->
<string name="month_shortest_february">F</string>
<!-- An abbreviated month name. One character long if it makes sense. Does not have
to be unique.
In US English: "M" stands for March. -->
<string name="month_shortest_march">M</string>
<!-- An abbreviated month name. One character long if it makes sense. Does not have
to be unique.
In US English: "A" stands for April. -->
<string name="month_shortest_april">A</string>
<!-- An abbreviated month name. One character long if it makes sense. Does not have
to be unique.
In US English: "M" stands for May. -->
<string name="month_shortest_may">M</string>
<!-- An abbreviated month name. One character long if it makes sense. Does not have
to be unique.
In US English: "J" stands for June. -->
<string name="month_shortest_june">J</string>
<!-- An abbreviated month name. One character long if it makes sense. Does not have
to be unique.
In US English: "J" stands for July. -->
<string name="month_shortest_july">J</string>
<!-- An abbreviated month name. One character long if it makes sense. Does not have
to be unique.
In US English: "A" stands for August. -->
<string name="month_shortest_august">A</string>
<!-- An abbreviated month name. One character long if it makes sense. Does not have
to be unique.
In US English: "S" stands for September. -->
<string name="month_shortest_september">S</string>
<!-- An abbreviated month name. One character long if it makes sense. Does not have
to be unique.
In US English: "O" stands for October. -->
<string name="month_shortest_october">O</string>
<!-- An abbreviated month name. One character long if it makes sense. Does not have
to be unique.
In US English: "N" stands for November. -->
<string name="month_shortest_november">N</string>
<!-- An abbreviated month name. One character long if it makes sense. Does not have
to be unique.
In US English: "D" stands for December. -->
<string name="month_shortest_december">D</string>
<!-- Format string for times like "01:23" -->
<string name="elapsed_time_short_format_mm_ss"><xliff:g id="format">%1$02d:%2$02d</xliff:g></string>
<!-- Format string for times like "1:43:33" -->
<string name="elapsed_time_short_format_h_mm_ss"><xliff:g id="format">%1$d:%2$02d:%3$02d</xliff:g></string>
<!-- EditText context menu -->
<string name="selectAll">Select all</string>
<!-- EditText context menu -->
<string name="cut">Cut</string>
<!-- EditText context menu -->
<string name="cutAll">Cut all</string>
<!-- EditText context menu -->
<string name="copy">Copy</string>
<!-- EditText context menu -->
<string name="copyAll">Copy all</string>
<!-- EditText context menu -->
<string name="paste">Paste</string>
<!-- EditText context menu -->
<string name="copyUrl">Copy URL</string>
<!-- Low internal storage error dialog properties title of extended view -->
<string name="low_internal_storage_view_title">Low on space</string>
<!-- Low internal storage error dialog properties text displayed in extended view -->
<string name="low_internal_storage_view_text">Phone storage space is getting low.</string>
<!-- Preference framework strings. -->
<string name="ok">OK</string>
<string name="cancel">Cancel</string>
<string name="yes">OK</string>
<string name="no">Cancel</string>
<!-- IndicatorButton -->
<string name="capital_on">ON</string>
<string name="capital_off">OFF</string>
<!-- Title of intent resolver dialog when selecting an application to run. -->
<string name="whichApplication">Complete action using</string>
<!-- Option to always use the selected Intent resolution in the future. -->
<string name="alwaysUse">Use by default for this action.</string>
<!-- Text displayed when the user selects the check box for setting default application-->
<string name="clearDefaultHintMsg">Clear default in Home Settings &gt; Applications &gt; Manage applications.</string>
<!-- Default title for the activity chooser, when one is not given. -->
<string name="chooseActivity">Select an action</string>
<!-- Text to display when there are no activities found to display in the
activity chooser. -->
<string name="noApplications">No applications can perform this action.</string>
<string name="aerr_title">Sorry!</string>
<string name="aerr_application">The application <xliff:g id="application">%1$s</xliff:g>
(process <xliff:g id="process">%2$s</xliff:g>) has stopped unexpectedly. Please try again.</string>
<string name="aerr_process">The process <xliff:g id="process">%1$s</xliff:g> has
stopped unexpectedly. Please try again.</string>
<string name="anr_title">Sorry!</string>
<string name="anr_activity_application">Activity <xliff:g id="activity">%1$s</xliff:g> (in application <xliff:g id="application">%2$s</xliff:g>) is not responding.</string>
<string name="anr_activity_process">Activity <xliff:g id="activity">%1$s</xliff:g> (in process <xliff:g id="process">%2$s</xliff:g>) is not responding.</string>
<string name="anr_application_process">Application <xliff:g id="application">%1$s</xliff:g> (in process <xliff:g id="process">%2$s</xliff:g>) is not responding.</string>
<string name="anr_process">Process <xliff:g id="process">%1$s</xliff:g> is not responding.</string>
<string name="force_close">Force close</string>
<string name="wait">Wait</string>
<string name="debug">Debug</string>
<!-- Displayed in the title of the chooser for things to do with text that
is to be sent to another application. -->
<string name="sendText">Select an action for text</string>
<!-- Volume strings -->
<string name="volume_ringtone">Ringer volume</string>
<string name="volume_music">Music/video volume</string>
<string name="volume_call">In-call volume</string>
<string name="volume_alarm">Alarm volume</string>
<string name="volume_unknown">Volume</string>
<!-- Ringtone picker strings -->
<string name="ringtone_default">Default ringtone</string>
<string name="ringtone_default_with_actual">Default ringtone (<xliff:g id="actual_ringtone">%1$s</xliff:g>)</string>
<string name="ringtone_silent">Silent</string>
<string name="ringtone_picker_title">Select a ringtone</string>
<string name="ringtone_unknown">Unknown ringtone</string>
<!-- Wi-Fi strings -->
<plurals name="wifi_available">
<item quantity="one">Wi-Fi network available</item>
<item quantity="other">Wi-Fi networks available</item>
</plurals>
<plurals name="wifi_available_detailed">
<item quantity="one">Open Wi-Fi network available</item>
<item quantity="other">Open Wi-Fi networks available</item>
</plurals>
<!-- Character picker strings -->
<string name="select_character">Select character to insert</string>
<!-- SMS per-application rate control Dialog -->
<string name="sms_control_default_app_name">Unknown application</string>
<string name="sms_control_title">Sending SMS messages</string>
<string name="sms_control_message">A large number of SMS messages are being sent. Select \"OK\" to continue, or \"Cancel\" to stop sending.</string>
<string name="sms_control_yes">OK</string>
<string name="sms_control_no">Cancel</string>
<!-- Date/Time Picker strings -->
<string name="date_time_set">Set</string>
<!-- SensorService strings -->
<string name="compass_accuracy_banner">Compass requires calibration</string>
<string name="compass_accuracy_notificaction_title">Calibrate compass</string>
<string name="compass_accuracy_notificaction_body">Shake phone gently to calibrate.</string>
<!-- Security Permissions strings-->
<string name="default_permission_group">Default</string>
<string name="permissions_format"><xliff:g id="perm_line1">%1$s</xliff:g>, <xliff:g id="perm_line2">%2$s</xliff:g></string>
<string name="no_permissions">No permissions required</string>
<string name="perms_hide"><b>Hide</b></string>
<string name="perms_show_all"><b>Show all</b></string>
<string name="googlewebcontenthelper_loading">Loading\u2026</string>
<!-- USB storage dialog strings -->
<!-- This is the label for the activity, and should never be visible to the user. -->
<string name="usb_storage_activity_label">USB storage dialog</string>
<string name="usb_storage_title">USB connected</string>
<string name="usb_storage_message">You have connected your phone to your computer via USB. Select \"Mount\" if you want to copy files between your computer and your phone\'s SD card.</string>
<string name="usb_storage_button_mount">Mount</string>
<string name="usb_storage_button_unmount">Don\'t mount</string>
<string name="usb_storage_error_message">There is a problem using your SD card for USB storage.</string>
<string name="usb_storage_notification_title">USB connected</string>
<string name="usb_storage_notification_message">Select to copy files to/from your computer.</string>
</resources>