| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <math.h> |
| |
| //#define LOG_NDEBUG 0 |
| #define LOG_TAG "A2dpAudioInterface" |
| #include <utils/Log.h> |
| #include <utils/String8.h> |
| |
| #include "A2dpAudioInterface.h" |
| #include "audio/liba2dp.h" |
| |
| |
| namespace android { |
| |
| // ---------------------------------------------------------------------------- |
| |
| //AudioHardwareInterface* A2dpAudioInterface::createA2dpInterface() |
| //{ |
| // AudioHardwareInterface* hw = 0; |
| // |
| // hw = AudioHardwareInterface::create(); |
| // LOGD("new A2dpAudioInterface(hw: %p)", hw); |
| // hw = new A2dpAudioInterface(hw); |
| // return hw; |
| //} |
| |
| A2dpAudioInterface::A2dpAudioInterface(AudioHardwareInterface* hw) : |
| mOutput(0), mHardwareInterface(hw), mBluetoothEnabled(true), mSuspended(false) |
| { |
| } |
| |
| A2dpAudioInterface::~A2dpAudioInterface() |
| { |
| closeOutputStream((AudioStreamOut *)mOutput); |
| delete mHardwareInterface; |
| } |
| |
| status_t A2dpAudioInterface::initCheck() |
| { |
| if (mHardwareInterface == 0) return NO_INIT; |
| return mHardwareInterface->initCheck(); |
| } |
| |
| AudioStreamOut* A2dpAudioInterface::openOutputStream( |
| uint32_t devices, int *format, uint32_t *channels, uint32_t *sampleRate, status_t *status) |
| { |
| if (!AudioSystem::isA2dpDevice((AudioSystem::audio_devices)devices)) { |
| LOGV("A2dpAudioInterface::openOutputStream() open HW device: %x", devices); |
| return mHardwareInterface->openOutputStream(devices, format, channels, sampleRate, status); |
| } |
| |
| status_t err = 0; |
| |
| // only one output stream allowed |
| if (mOutput) { |
| if (status) |
| *status = -1; |
| return NULL; |
| } |
| |
| // create new output stream |
| A2dpAudioStreamOut* out = new A2dpAudioStreamOut(); |
| if ((err = out->set(devices, format, channels, sampleRate)) == NO_ERROR) { |
| mOutput = out; |
| mOutput->setBluetoothEnabled(mBluetoothEnabled); |
| mOutput->setSuspended(mSuspended); |
| } else { |
| delete out; |
| } |
| |
| if (status) |
| *status = err; |
| return mOutput; |
| } |
| |
| void A2dpAudioInterface::closeOutputStream(AudioStreamOut* out) { |
| if (mOutput == 0 || mOutput != out) { |
| mHardwareInterface->closeOutputStream(out); |
| } |
| else { |
| delete mOutput; |
| mOutput = 0; |
| } |
| } |
| |
| |
| AudioStreamIn* A2dpAudioInterface::openInputStream( |
| uint32_t devices, int *format, uint32_t *channels, uint32_t *sampleRate, status_t *status, |
| AudioSystem::audio_in_acoustics acoustics) |
| { |
| return mHardwareInterface->openInputStream(devices, format, channels, sampleRate, status, acoustics); |
| } |
| |
| void A2dpAudioInterface::closeInputStream(AudioStreamIn* in) |
| { |
| return mHardwareInterface->closeInputStream(in); |
| } |
| |
| status_t A2dpAudioInterface::setMode(int mode) |
| { |
| return mHardwareInterface->setMode(mode); |
| } |
| |
| status_t A2dpAudioInterface::setMicMute(bool state) |
| { |
| return mHardwareInterface->setMicMute(state); |
| } |
| |
| status_t A2dpAudioInterface::getMicMute(bool* state) |
| { |
| return mHardwareInterface->getMicMute(state); |
| } |
| |
| status_t A2dpAudioInterface::setParameters(const String8& keyValuePairs) |
| { |
| AudioParameter param = AudioParameter(keyValuePairs); |
| String8 value; |
| String8 key; |
| status_t status = NO_ERROR; |
| |
| LOGV("setParameters() %s", keyValuePairs.string()); |
| |
| key = "bluetooth_enabled"; |
| if (param.get(key, value) == NO_ERROR) { |
| mBluetoothEnabled = (value == "true"); |
| if (mOutput) { |
| mOutput->setBluetoothEnabled(mBluetoothEnabled); |
| } |
| param.remove(key); |
| } |
| key = String8("A2dpSuspended"); |
| if (param.get(key, value) == NO_ERROR) { |
| mSuspended = (value == "true"); |
| if (mOutput) { |
| mOutput->setSuspended(mSuspended); |
| } |
| param.remove(key); |
| } |
| |
| if (param.size()) { |
| status_t hwStatus = mHardwareInterface->setParameters(param.toString()); |
| if (status == NO_ERROR) { |
| status = hwStatus; |
| } |
| } |
| |
| return status; |
| } |
| |
| String8 A2dpAudioInterface::getParameters(const String8& keys) |
| { |
| AudioParameter param = AudioParameter(keys); |
| AudioParameter a2dpParam = AudioParameter(); |
| String8 value; |
| String8 key; |
| |
| key = "bluetooth_enabled"; |
| if (param.get(key, value) == NO_ERROR) { |
| value = mBluetoothEnabled ? "true" : "false"; |
| a2dpParam.add(key, value); |
| param.remove(key); |
| } |
| key = "A2dpSuspended"; |
| if (param.get(key, value) == NO_ERROR) { |
| value = mSuspended ? "true" : "false"; |
| a2dpParam.add(key, value); |
| param.remove(key); |
| } |
| |
| String8 keyValuePairs = a2dpParam.toString(); |
| |
| if (param.size()) { |
| keyValuePairs += ";"; |
| keyValuePairs += mHardwareInterface->getParameters(param.toString()); |
| } |
| |
| LOGV("getParameters() %s", keyValuePairs.string()); |
| return keyValuePairs; |
| } |
| |
| size_t A2dpAudioInterface::getInputBufferSize(uint32_t sampleRate, int format, int channelCount) |
| { |
| return mHardwareInterface->getInputBufferSize(sampleRate, format, channelCount); |
| } |
| |
| status_t A2dpAudioInterface::setVoiceVolume(float v) |
| { |
| return mHardwareInterface->setVoiceVolume(v); |
| } |
| |
| status_t A2dpAudioInterface::setMasterVolume(float v) |
| { |
| return mHardwareInterface->setMasterVolume(v); |
| } |
| |
| status_t A2dpAudioInterface::dump(int fd, const Vector<String16>& args) |
| { |
| return mHardwareInterface->dumpState(fd, args); |
| } |
| |
| // ---------------------------------------------------------------------------- |
| |
| A2dpAudioInterface::A2dpAudioStreamOut::A2dpAudioStreamOut() : |
| mFd(-1), mStandby(true), mStartCount(0), mRetryCount(0), mData(NULL), |
| // assume BT enabled to start, this is safe because its only the |
| // enabled->disabled transition we are worried about |
| mBluetoothEnabled(true), mDevice(0), mClosing(false), mSuspended(false) |
| { |
| // use any address by default |
| strcpy(mA2dpAddress, "00:00:00:00:00:00"); |
| init(); |
| } |
| |
| status_t A2dpAudioInterface::A2dpAudioStreamOut::set( |
| uint32_t device, int *pFormat, uint32_t *pChannels, uint32_t *pRate) |
| { |
| int lFormat = pFormat ? *pFormat : 0; |
| uint32_t lChannels = pChannels ? *pChannels : 0; |
| uint32_t lRate = pRate ? *pRate : 0; |
| |
| LOGD("A2dpAudioStreamOut::set %x, %d, %d, %d\n", device, lFormat, lChannels, lRate); |
| |
| // fix up defaults |
| if (lFormat == 0) lFormat = format(); |
| if (lChannels == 0) lChannels = channels(); |
| if (lRate == 0) lRate = sampleRate(); |
| |
| // check values |
| if ((lFormat != format()) || |
| (lChannels != channels()) || |
| (lRate != sampleRate())){ |
| if (pFormat) *pFormat = format(); |
| if (pChannels) *pChannels = channels(); |
| if (pRate) *pRate = sampleRate(); |
| return BAD_VALUE; |
| } |
| |
| if (pFormat) *pFormat = lFormat; |
| if (pChannels) *pChannels = lChannels; |
| if (pRate) *pRate = lRate; |
| |
| mDevice = device; |
| return NO_ERROR; |
| } |
| |
| A2dpAudioInterface::A2dpAudioStreamOut::~A2dpAudioStreamOut() |
| { |
| LOGV("A2dpAudioStreamOut destructor"); |
| standby(); |
| close(); |
| LOGV("A2dpAudioStreamOut destructor returning from close()"); |
| } |
| |
| ssize_t A2dpAudioInterface::A2dpAudioStreamOut::write(const void* buffer, size_t bytes) |
| { |
| Mutex::Autolock lock(mLock); |
| |
| size_t remaining = bytes; |
| status_t status = -1; |
| |
| if (!mBluetoothEnabled || mClosing || mSuspended) { |
| LOGV("A2dpAudioStreamOut::write(), but bluetooth disabled \ |
| mBluetoothEnabled %d, mClosing %d, mSuspended %d", |
| mBluetoothEnabled, mClosing, mSuspended); |
| goto Error; |
| } |
| |
| status = init(); |
| if (status < 0) |
| goto Error; |
| |
| while (remaining > 0) { |
| status = a2dp_write(mData, buffer, remaining); |
| if (status <= 0) { |
| LOGE("a2dp_write failed err: %d\n", status); |
| goto Error; |
| } |
| remaining -= status; |
| buffer = ((char *)buffer) + status; |
| } |
| |
| mStandby = false; |
| |
| return bytes; |
| |
| Error: |
| // Simulate audio output timing in case of error |
| usleep(bytes * 1000000 / frameSize() / sampleRate()); |
| |
| return status; |
| } |
| |
| status_t A2dpAudioInterface::A2dpAudioStreamOut::init() |
| { |
| if (!mData) { |
| status_t status = a2dp_init(44100, 2, &mData); |
| if (status < 0) { |
| LOGE("a2dp_init failed err: %d\n", status); |
| mData = NULL; |
| return status; |
| } |
| a2dp_set_sink(mData, mA2dpAddress); |
| } |
| |
| return 0; |
| } |
| |
| status_t A2dpAudioInterface::A2dpAudioStreamOut::standby() |
| { |
| int result = 0; |
| |
| if (mClosing) { |
| LOGV("Ignore standby, closing"); |
| return result; |
| } |
| |
| Mutex::Autolock lock(mLock); |
| |
| if (!mStandby) { |
| result = a2dp_stop(mData); |
| if (result == 0) |
| mStandby = true; |
| } |
| |
| return result; |
| } |
| |
| status_t A2dpAudioInterface::A2dpAudioStreamOut::setParameters(const String8& keyValuePairs) |
| { |
| AudioParameter param = AudioParameter(keyValuePairs); |
| String8 value; |
| String8 key = String8("a2dp_sink_address"); |
| status_t status = NO_ERROR; |
| int device; |
| LOGV("A2dpAudioStreamOut::setParameters() %s", keyValuePairs.string()); |
| |
| if (param.get(key, value) == NO_ERROR) { |
| if (value.length() != strlen("00:00:00:00:00:00")) { |
| status = BAD_VALUE; |
| } else { |
| setAddress(value.string()); |
| } |
| param.remove(key); |
| } |
| key = String8("closing"); |
| if (param.get(key, value) == NO_ERROR) { |
| mClosing = (value == "true"); |
| param.remove(key); |
| } |
| key = AudioParameter::keyRouting; |
| if (param.getInt(key, device) == NO_ERROR) { |
| if (AudioSystem::isA2dpDevice((AudioSystem::audio_devices)device)) { |
| mDevice = device; |
| status = NO_ERROR; |
| } else { |
| status = BAD_VALUE; |
| } |
| param.remove(key); |
| } |
| |
| if (param.size()) { |
| status = BAD_VALUE; |
| } |
| return status; |
| } |
| |
| String8 A2dpAudioInterface::A2dpAudioStreamOut::getParameters(const String8& keys) |
| { |
| AudioParameter param = AudioParameter(keys); |
| String8 value; |
| String8 key = String8("a2dp_sink_address"); |
| |
| if (param.get(key, value) == NO_ERROR) { |
| value = mA2dpAddress; |
| param.add(key, value); |
| } |
| key = AudioParameter::keyRouting; |
| if (param.get(key, value) == NO_ERROR) { |
| param.addInt(key, (int)mDevice); |
| } |
| |
| LOGV("A2dpAudioStreamOut::getParameters() %s", param.toString().string()); |
| return param.toString(); |
| } |
| |
| status_t A2dpAudioInterface::A2dpAudioStreamOut::setAddress(const char* address) |
| { |
| Mutex::Autolock lock(mLock); |
| |
| if (strlen(address) != strlen("00:00:00:00:00:00")) |
| return -EINVAL; |
| |
| strcpy(mA2dpAddress, address); |
| if (mData) |
| a2dp_set_sink(mData, mA2dpAddress); |
| |
| return NO_ERROR; |
| } |
| |
| status_t A2dpAudioInterface::A2dpAudioStreamOut::setBluetoothEnabled(bool enabled) |
| { |
| LOGD("setBluetoothEnabled %d", enabled); |
| |
| Mutex::Autolock lock(mLock); |
| |
| mBluetoothEnabled = enabled; |
| if (!enabled) { |
| return close_l(); |
| } |
| return NO_ERROR; |
| } |
| |
| status_t A2dpAudioInterface::A2dpAudioStreamOut::setSuspended(bool onOff) |
| { |
| LOGV("setSuspended %d", onOff); |
| mSuspended = onOff; |
| standby(); |
| return NO_ERROR; |
| } |
| |
| status_t A2dpAudioInterface::A2dpAudioStreamOut::close() |
| { |
| Mutex::Autolock lock(mLock); |
| LOGV("A2dpAudioStreamOut::close() calling close_l()"); |
| return close_l(); |
| } |
| |
| status_t A2dpAudioInterface::A2dpAudioStreamOut::close_l() |
| { |
| if (mData) { |
| LOGV("A2dpAudioStreamOut::close_l() calling a2dp_cleanup(mData)"); |
| a2dp_cleanup(mData); |
| mData = NULL; |
| } |
| return NO_ERROR; |
| } |
| |
| status_t A2dpAudioInterface::A2dpAudioStreamOut::dump(int fd, const Vector<String16>& args) |
| { |
| return NO_ERROR; |
| } |
| |
| }; // namespace android |