| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.net.wifi; |
| |
| import android.annotation.SdkConstant; |
| import android.annotation.SdkConstant.SdkConstantType; |
| import android.net.DhcpInfo; |
| import android.os.Binder; |
| import android.os.IBinder; |
| import android.os.Handler; |
| import android.os.RemoteException; |
| import android.os.WorkSource; |
| |
| import java.util.List; |
| |
| /** |
| * This class provides the primary API for managing all aspects of Wi-Fi |
| * connectivity. Get an instance of this class by calling |
| * {@link android.content.Context#getSystemService(String) Context.getSystemService(Context.WIFI_SERVICE)}. |
| |
| * It deals with several categories of items: |
| * <ul> |
| * <li>The list of configured networks. The list can be viewed and updated, |
| * and attributes of individual entries can be modified.</li> |
| * <li>The currently active Wi-Fi network, if any. Connectivity can be |
| * established or torn down, and dynamic information about the state of |
| * the network can be queried.</li> |
| * <li>Results of access point scans, containing enough information to |
| * make decisions about what access point to connect to.</li> |
| * <li>It defines the names of various Intent actions that are broadcast |
| * upon any sort of change in Wi-Fi state. |
| * </ul> |
| * This is the API to use when performing Wi-Fi specific operations. To |
| * perform operations that pertain to network connectivity at an abstract |
| * level, use {@link android.net.ConnectivityManager}. |
| */ |
| public class WifiManager { |
| |
| // Supplicant error codes: |
| /** |
| * The error code if there was a problem authenticating. |
| */ |
| public static final int ERROR_AUTHENTICATING = 1; |
| |
| /** |
| * Broadcast intent action indicating that Wi-Fi has been enabled, disabled, |
| * enabling, disabling, or unknown. One extra provides this state as an int. |
| * Another extra provides the previous state, if available. |
| * |
| * @see #EXTRA_WIFI_STATE |
| * @see #EXTRA_PREVIOUS_WIFI_STATE |
| */ |
| @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String WIFI_STATE_CHANGED_ACTION = |
| "android.net.wifi.WIFI_STATE_CHANGED"; |
| /** |
| * The lookup key for an int that indicates whether Wi-Fi is enabled, |
| * disabled, enabling, disabling, or unknown. Retrieve it with |
| * {@link android.content.Intent#getIntExtra(String,int)}. |
| * |
| * @see #WIFI_STATE_DISABLED |
| * @see #WIFI_STATE_DISABLING |
| * @see #WIFI_STATE_ENABLED |
| * @see #WIFI_STATE_ENABLING |
| * @see #WIFI_STATE_UNKNOWN |
| */ |
| public static final String EXTRA_WIFI_STATE = "wifi_state"; |
| /** |
| * The previous Wi-Fi state. |
| * |
| * @see #EXTRA_WIFI_STATE |
| */ |
| public static final String EXTRA_PREVIOUS_WIFI_STATE = "previous_wifi_state"; |
| |
| /** |
| * Wi-Fi is currently being disabled. The state will change to {@link #WIFI_STATE_DISABLED} if |
| * it finishes successfully. |
| * |
| * @see #WIFI_STATE_CHANGED_ACTION |
| * @see #getWifiState() |
| */ |
| public static final int WIFI_STATE_DISABLING = 0; |
| /** |
| * Wi-Fi is disabled. |
| * |
| * @see #WIFI_STATE_CHANGED_ACTION |
| * @see #getWifiState() |
| */ |
| public static final int WIFI_STATE_DISABLED = 1; |
| /** |
| * Wi-Fi is currently being enabled. The state will change to {@link #WIFI_STATE_ENABLED} if |
| * it finishes successfully. |
| * |
| * @see #WIFI_STATE_CHANGED_ACTION |
| * @see #getWifiState() |
| */ |
| public static final int WIFI_STATE_ENABLING = 2; |
| /** |
| * Wi-Fi is enabled. |
| * |
| * @see #WIFI_STATE_CHANGED_ACTION |
| * @see #getWifiState() |
| */ |
| public static final int WIFI_STATE_ENABLED = 3; |
| /** |
| * Wi-Fi is in an unknown state. This state will occur when an error happens while enabling |
| * or disabling. |
| * |
| * @see #WIFI_STATE_CHANGED_ACTION |
| * @see #getWifiState() |
| */ |
| public static final int WIFI_STATE_UNKNOWN = 4; |
| |
| /** |
| * Broadcast intent action indicating that Wi-Fi AP has been enabled, disabled, |
| * enabling, disabling, or failed. |
| * |
| * @hide |
| */ |
| @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String WIFI_AP_STATE_CHANGED_ACTION = |
| "android.net.wifi.WIFI_AP_STATE_CHANGED"; |
| |
| /** |
| * The lookup key for an int that indicates whether Wi-Fi AP is enabled, |
| * disabled, enabling, disabling, or failed. Retrieve it with |
| * {@link android.content.Intent#getIntExtra(String,int)}. |
| * |
| * @see #WIFI_AP_STATE_DISABLED |
| * @see #WIFI_AP_STATE_DISABLING |
| * @see #WIFI_AP_STATE_ENABLED |
| * @see #WIFI_AP_STATE_ENABLING |
| * @see #WIFI_AP_STATE_FAILED |
| * |
| * @hide |
| */ |
| public static final String EXTRA_WIFI_AP_STATE = "wifi_state"; |
| /** |
| * The previous Wi-Fi state. |
| * |
| * @see #EXTRA_WIFI_AP_STATE |
| * |
| * @hide |
| */ |
| public static final String EXTRA_PREVIOUS_WIFI_AP_STATE = "previous_wifi_state"; |
| /** |
| * Wi-Fi AP is currently being disabled. The state will change to |
| * {@link #WIFI_AP_STATE_DISABLED} if it finishes successfully. |
| * |
| * @see #WIFI_AP_STATE_CHANGED_ACTION |
| * @see #getWifiApState() |
| * |
| * @hide |
| */ |
| public static final int WIFI_AP_STATE_DISABLING = 10; |
| /** |
| * Wi-Fi AP is disabled. |
| * |
| * @see #WIFI_AP_STATE_CHANGED_ACTION |
| * @see #getWifiState() |
| * |
| * @hide |
| */ |
| public static final int WIFI_AP_STATE_DISABLED = 11; |
| /** |
| * Wi-Fi AP is currently being enabled. The state will change to |
| * {@link #WIFI_AP_STATE_ENABLED} if it finishes successfully. |
| * |
| * @see #WIFI_AP_STATE_CHANGED_ACTION |
| * @see #getWifiApState() |
| * |
| * @hide |
| */ |
| public static final int WIFI_AP_STATE_ENABLING = 12; |
| /** |
| * Wi-Fi AP is enabled. |
| * |
| * @see #WIFI_AP_STATE_CHANGED_ACTION |
| * @see #getWifiApState() |
| * |
| * @hide |
| */ |
| public static final int WIFI_AP_STATE_ENABLED = 13; |
| /** |
| * Wi-Fi AP is in a failed state. This state will occur when an error occurs during |
| * enabling or disabling |
| * |
| * @see #WIFI_AP_STATE_CHANGED_ACTION |
| * @see #getWifiApState() |
| * |
| * @hide |
| */ |
| public static final int WIFI_AP_STATE_FAILED = 14; |
| |
| /** |
| * Broadcast intent action indicating that a connection to the supplicant has |
| * been established (and it is now possible |
| * to perform Wi-Fi operations) or the connection to the supplicant has been |
| * lost. One extra provides the connection state as a boolean, where {@code true} |
| * means CONNECTED. |
| * @see #EXTRA_SUPPLICANT_CONNECTED |
| */ |
| @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String SUPPLICANT_CONNECTION_CHANGE_ACTION = |
| "android.net.wifi.supplicant.CONNECTION_CHANGE"; |
| /** |
| * The lookup key for a boolean that indicates whether a connection to |
| * the supplicant daemon has been gained or lost. {@code true} means |
| * a connection now exists. |
| * Retrieve it with {@link android.content.Intent#getBooleanExtra(String,boolean)}. |
| */ |
| public static final String EXTRA_SUPPLICANT_CONNECTED = "connected"; |
| /** |
| * Broadcast intent action indicating that the state of Wi-Fi connectivity |
| * has changed. One extra provides the new state |
| * in the form of a {@link android.net.NetworkInfo} object. If the new state is |
| * CONNECTED, a second extra may provide the BSSID of the access point, |
| * as a {@code String}. |
| * @see #EXTRA_NETWORK_INFO |
| * @see #EXTRA_BSSID |
| */ |
| @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String NETWORK_STATE_CHANGED_ACTION = "android.net.wifi.STATE_CHANGE"; |
| /** |
| * The lookup key for a {@link android.net.NetworkInfo} object associated with the |
| * Wi-Fi network. Retrieve with |
| * {@link android.content.Intent#getParcelableExtra(String)}. |
| */ |
| public static final String EXTRA_NETWORK_INFO = "networkInfo"; |
| /** |
| * The lookup key for a String giving the BSSID of the access point to which |
| * we are connected. Only present when the new state is CONNECTED. |
| * Retrieve with |
| * {@link android.content.Intent#getStringExtra(String)}. |
| */ |
| public static final String EXTRA_BSSID = "bssid"; |
| /** |
| * Broadcast intent action indicating that the state of establishing a connection to |
| * an access point has changed.One extra provides the new |
| * {@link SupplicantState}. Note that the supplicant state is Wi-Fi specific, and |
| * is not generally the most useful thing to look at if you are just interested in |
| * the overall state of connectivity. |
| * @see #EXTRA_NEW_STATE |
| * @see #EXTRA_SUPPLICANT_ERROR |
| */ |
| @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String SUPPLICANT_STATE_CHANGED_ACTION = |
| "android.net.wifi.supplicant.STATE_CHANGE"; |
| /** |
| * The lookup key for a {@link SupplicantState} describing the new state |
| * Retrieve with |
| * {@link android.content.Intent#getParcelableExtra(String)}. |
| */ |
| public static final String EXTRA_NEW_STATE = "newState"; |
| |
| /** |
| * The lookup key for a {@link SupplicantState} describing the supplicant |
| * error code if any |
| * Retrieve with |
| * {@link android.content.Intent#getIntExtra(String, int)}. |
| * @see #ERROR_AUTHENTICATING |
| */ |
| public static final String EXTRA_SUPPLICANT_ERROR = "supplicantError"; |
| /** |
| * Broadcast intent action indicating that the supplicant configuration changed. |
| * This can be as a result of adding/updating/deleting a network |
| * @hide |
| */ |
| @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String SUPPLICANT_CONFIG_CHANGED_ACTION = |
| "android.net.wifi.supplicant.CONFIG_CHANGE"; |
| /** |
| * An access point scan has completed, and results are available from the supplicant. |
| * Call {@link #getScanResults()} to obtain the results. |
| */ |
| @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String SCAN_RESULTS_AVAILABLE_ACTION = "android.net.wifi.SCAN_RESULTS"; |
| /** |
| * The RSSI (signal strength) has changed. |
| * @see #EXTRA_NEW_RSSI |
| */ |
| @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String RSSI_CHANGED_ACTION = "android.net.wifi.RSSI_CHANGED"; |
| /** |
| * The lookup key for an {@code int} giving the new RSSI in dBm. |
| */ |
| public static final String EXTRA_NEW_RSSI = "newRssi"; |
| |
| /** |
| * Broadcast intent action indicating that the IP configuration |
| * changed on wifi. |
| * @hide |
| */ |
| @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String CONFIG_CHANGED_ACTION = "android.net.wifi.CONFIG_CHANGED"; |
| |
| /** |
| * The lookup key for a {@link android.net.LinkProperties} object associated with the |
| * Wi-Fi network. Retrieve with |
| * {@link android.content.Intent#getParcelableExtra(String)}. |
| * @hide |
| */ |
| public static final String EXTRA_LINK_PROPERTIES = "linkProperties"; |
| |
| /** |
| * The lookup key for a {@link android.net.LinkCapabilities} object associated with the |
| * Wi-Fi network. Retrieve with |
| * {@link android.content.Intent#getParcelableExtra(String)}. |
| * @hide |
| */ |
| public static final String EXTRA_LINK_CAPABILITIES = "linkCapabilities"; |
| |
| /** |
| * The network IDs of the configured networks could have changed. |
| */ |
| @SdkConstant(SdkConstantType.BROADCAST_INTENT_ACTION) |
| public static final String NETWORK_IDS_CHANGED_ACTION = "android.net.wifi.NETWORK_IDS_CHANGED"; |
| |
| /** |
| * Activity Action: Pick a Wi-Fi network to connect to. |
| * <p>Input: Nothing. |
| * <p>Output: Nothing. |
| */ |
| @SdkConstant(SdkConstantType.ACTIVITY_INTENT_ACTION) |
| public static final String ACTION_PICK_WIFI_NETWORK = "android.net.wifi.PICK_WIFI_NETWORK"; |
| |
| /** |
| * In this Wi-Fi lock mode, Wi-Fi will be kept active, |
| * and will behave normally, i.e., it will attempt to automatically |
| * establish a connection to a remembered access point that is |
| * within range, and will do periodic scans if there are remembered |
| * access points but none are in range. |
| */ |
| public static final int WIFI_MODE_FULL = 1; |
| /** |
| * In this Wi-Fi lock mode, Wi-Fi will be kept active, |
| * but the only operation that will be supported is initiation of |
| * scans, and the subsequent reporting of scan results. No attempts |
| * will be made to automatically connect to remembered access points, |
| * nor will periodic scans be automatically performed looking for |
| * remembered access points. Scans must be explicitly requested by |
| * an application in this mode. |
| */ |
| public static final int WIFI_MODE_SCAN_ONLY = 2; |
| |
| /** Anything worse than or equal to this will show 0 bars. */ |
| private static final int MIN_RSSI = -100; |
| |
| /** Anything better than or equal to this will show the max bars. */ |
| private static final int MAX_RSSI = -55; |
| |
| IWifiManager mService; |
| Handler mHandler; |
| |
| /* Maximum number of active locks we allow. |
| * This limit was added to prevent apps from creating a ridiculous number |
| * of locks and crashing the system by overflowing the global ref table. |
| */ |
| private static final int MAX_ACTIVE_LOCKS = 50; |
| |
| /* Number of currently active WifiLocks and MulticastLocks */ |
| private int mActiveLockCount; |
| |
| /** |
| * Create a new WifiManager instance. |
| * Applications will almost always want to use |
| * {@link android.content.Context#getSystemService Context.getSystemService()} to retrieve |
| * the standard {@link android.content.Context#WIFI_SERVICE Context.WIFI_SERVICE}. |
| * @param service the Binder interface |
| * @param handler target for messages |
| * @hide - hide this because it takes in a parameter of type IWifiManager, which |
| * is a system private class. |
| */ |
| public WifiManager(IWifiManager service, Handler handler) { |
| mService = service; |
| mHandler = handler; |
| } |
| |
| /** |
| * Return a list of all the networks configured in the supplicant. |
| * Not all fields of WifiConfiguration are returned. Only the following |
| * fields are filled in: |
| * <ul> |
| * <li>networkId</li> |
| * <li>SSID</li> |
| * <li>BSSID</li> |
| * <li>priority</li> |
| * <li>allowedProtocols</li> |
| * <li>allowedKeyManagement</li> |
| * <li>allowedAuthAlgorithms</li> |
| * <li>allowedPairwiseCiphers</li> |
| * <li>allowedGroupCiphers</li> |
| * </ul> |
| * @return a list of network configurations in the form of a list |
| * of {@link WifiConfiguration} objects. |
| */ |
| public List<WifiConfiguration> getConfiguredNetworks() { |
| try { |
| return mService.getConfiguredNetworks(); |
| } catch (RemoteException e) { |
| return null; |
| } |
| } |
| |
| /** |
| * Add a new network description to the set of configured networks. |
| * The {@code networkId} field of the supplied configuration object |
| * is ignored. |
| * <p/> |
| * The new network will be marked DISABLED by default. To enable it, |
| * called {@link #enableNetwork}. |
| * |
| * @param config the set of variables that describe the configuration, |
| * contained in a {@link WifiConfiguration} object. |
| * @return the ID of the newly created network description. This is used in |
| * other operations to specified the network to be acted upon. |
| * Returns {@code -1} on failure. |
| */ |
| public int addNetwork(WifiConfiguration config) { |
| if (config == null) { |
| return -1; |
| } |
| config.networkId = -1; |
| return addOrUpdateNetwork(config); |
| } |
| |
| /** |
| * Update the network description of an existing configured network. |
| * |
| * @param config the set of variables that describe the configuration, |
| * contained in a {@link WifiConfiguration} object. It may |
| * be sparse, so that only the items that are being changed |
| * are non-<code>null</code>. The {@code networkId} field |
| * must be set to the ID of the existing network being updated. |
| * @return Returns the {@code networkId} of the supplied |
| * {@code WifiConfiguration} on success. |
| * <br/> |
| * Returns {@code -1} on failure, including when the {@code networkId} |
| * field of the {@code WifiConfiguration} does not refer to an |
| * existing network. |
| */ |
| public int updateNetwork(WifiConfiguration config) { |
| if (config == null || config.networkId < 0) { |
| return -1; |
| } |
| return addOrUpdateNetwork(config); |
| } |
| |
| /** |
| * Internal method for doing the RPC that creates a new network description |
| * or updates an existing one. |
| * |
| * @param config The possibly sparse object containing the variables that |
| * are to set or updated in the network description. |
| * @return the ID of the network on success, {@code -1} on failure. |
| */ |
| private int addOrUpdateNetwork(WifiConfiguration config) { |
| try { |
| return mService.addOrUpdateNetwork(config); |
| } catch (RemoteException e) { |
| return -1; |
| } |
| } |
| |
| /** |
| * Remove the specified network from the list of configured networks. |
| * This may result in the asynchronous delivery of state change |
| * events. |
| * @param netId the integer that identifies the network configuration |
| * to the supplicant |
| * @return {@code true} if the operation succeeded |
| */ |
| public boolean removeNetwork(int netId) { |
| try { |
| return mService.removeNetwork(netId); |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Allow a previously configured network to be associated with. If |
| * <code>disableOthers</code> is true, then all other configured |
| * networks are disabled, and an attempt to connect to the selected |
| * network is initiated. This may result in the asynchronous delivery |
| * of state change events. |
| * @param netId the ID of the network in the list of configured networks |
| * @param disableOthers if true, disable all other networks. The way to |
| * select a particular network to connect to is specify {@code true} |
| * for this parameter. |
| * @return {@code true} if the operation succeeded |
| */ |
| public boolean enableNetwork(int netId, boolean disableOthers) { |
| try { |
| return mService.enableNetwork(netId, disableOthers); |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Disable a configured network. The specified network will not be |
| * a candidate for associating. This may result in the asynchronous |
| * delivery of state change events. |
| * @param netId the ID of the network as returned by {@link #addNetwork}. |
| * @return {@code true} if the operation succeeded |
| */ |
| public boolean disableNetwork(int netId) { |
| try { |
| return mService.disableNetwork(netId); |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Disassociate from the currently active access point. This may result |
| * in the asynchronous delivery of state change events. |
| * @return {@code true} if the operation succeeded |
| */ |
| public boolean disconnect() { |
| try { |
| mService.disconnect(); |
| return true; |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Reconnect to the currently active access point, if we are currently |
| * disconnected. This may result in the asynchronous delivery of state |
| * change events. |
| * @return {@code true} if the operation succeeded |
| */ |
| public boolean reconnect() { |
| try { |
| mService.reconnect(); |
| return true; |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Reconnect to the currently active access point, even if we are already |
| * connected. This may result in the asynchronous delivery of state |
| * change events. |
| * @return {@code true} if the operation succeeded |
| */ |
| public boolean reassociate() { |
| try { |
| mService.reassociate(); |
| return true; |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Check that the supplicant daemon is responding to requests. |
| * @return {@code true} if we were able to communicate with the supplicant and |
| * it returned the expected response to the PING message. |
| */ |
| public boolean pingSupplicant() { |
| if (mService == null) |
| return false; |
| try { |
| return mService.pingSupplicant(); |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Request a scan for access points. Returns immediately. The availability |
| * of the results is made known later by means of an asynchronous event sent |
| * on completion of the scan. |
| * @return {@code true} if the operation succeeded, i.e., the scan was initiated |
| */ |
| public boolean startScan() { |
| try { |
| mService.startScan(false); |
| return true; |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Request a scan for access points. Returns immediately. The availability |
| * of the results is made known later by means of an asynchronous event sent |
| * on completion of the scan. |
| * This is a variant of startScan that forces an active scan, even if passive |
| * scans are the current default |
| * @return {@code true} if the operation succeeded, i.e., the scan was initiated |
| * |
| * @hide |
| */ |
| public boolean startScanActive() { |
| try { |
| mService.startScan(true); |
| return true; |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Return dynamic information about the current Wi-Fi connection, if any is active. |
| * @return the Wi-Fi information, contained in {@link WifiInfo}. |
| */ |
| public WifiInfo getConnectionInfo() { |
| try { |
| return mService.getConnectionInfo(); |
| } catch (RemoteException e) { |
| return null; |
| } |
| } |
| |
| /** |
| * Return the results of the latest access point scan. |
| * @return the list of access points found in the most recent scan. |
| */ |
| public List<ScanResult> getScanResults() { |
| try { |
| return mService.getScanResults(); |
| } catch (RemoteException e) { |
| return null; |
| } |
| } |
| |
| /** |
| * Tell the supplicant to persist the current list of configured networks. |
| * <p> |
| * Note: It is possible for this method to change the network IDs of |
| * existing networks. You should assume the network IDs can be different |
| * after calling this method. |
| * |
| * @return {@code true} if the operation succeeded |
| */ |
| public boolean saveConfiguration() { |
| try { |
| return mService.saveConfiguration(); |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Return the number of frequency channels that are allowed |
| * to be used in the current regulatory domain. |
| * @return the number of allowed channels, or {@code -1} if an error occurs |
| * |
| * @hide pending API council |
| */ |
| public int getNumAllowedChannels() { |
| try { |
| return mService.getNumAllowedChannels(); |
| } catch (RemoteException e) { |
| return -1; |
| } |
| } |
| |
| /** |
| * Set the number of frequency channels that are allowed to be used |
| * in the current regulatory domain. This method should be used only |
| * if the correct number of channels cannot be determined automatically |
| * for some reason. |
| * @param numChannels the number of allowed channels. Must be greater than 0 |
| * and less than or equal to 16. |
| * @param persist {@code true} if you want this remembered |
| * @return {@code true} if the operation succeeds, {@code false} otherwise, e.g., |
| * {@code numChannels} is out of range. |
| * |
| * @hide pending API council |
| */ |
| public boolean setNumAllowedChannels(int numChannels, boolean persist) { |
| try { |
| return mService.setNumAllowedChannels(numChannels, persist); |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Return the list of valid values for the number of allowed radio channels |
| * for various regulatory domains. |
| * @return the list of channel counts, or {@code null} if the operation fails |
| * |
| * @hide pending API council review |
| */ |
| public int[] getValidChannelCounts() { |
| try { |
| return mService.getValidChannelCounts(); |
| } catch (RemoteException e) { |
| return null; |
| } |
| } |
| |
| /** |
| * Return the DHCP-assigned addresses from the last successful DHCP request, |
| * if any. |
| * @return the DHCP information |
| */ |
| public DhcpInfo getDhcpInfo() { |
| try { |
| return mService.getDhcpInfo(); |
| } catch (RemoteException e) { |
| return null; |
| } |
| } |
| |
| |
| /** |
| * Enable or disable Wi-Fi. |
| * @param enabled {@code true} to enable, {@code false} to disable. |
| * @return {@code true} if the operation succeeds (or if the existing state |
| * is the same as the requested state). |
| */ |
| public boolean setWifiEnabled(boolean enabled) { |
| try { |
| return mService.setWifiEnabled(enabled); |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Gets the Wi-Fi enabled state. |
| * @return One of {@link #WIFI_STATE_DISABLED}, |
| * {@link #WIFI_STATE_DISABLING}, {@link #WIFI_STATE_ENABLED}, |
| * {@link #WIFI_STATE_ENABLING}, {@link #WIFI_STATE_UNKNOWN} |
| * @see #isWifiEnabled() |
| */ |
| public int getWifiState() { |
| try { |
| return mService.getWifiEnabledState(); |
| } catch (RemoteException e) { |
| return WIFI_STATE_UNKNOWN; |
| } |
| } |
| |
| /** |
| * Return whether Wi-Fi is enabled or disabled. |
| * @return {@code true} if Wi-Fi is enabled |
| * @see #getWifiState() |
| */ |
| public boolean isWifiEnabled() { |
| return getWifiState() == WIFI_STATE_ENABLED; |
| } |
| |
| /** |
| * Calculates the level of the signal. This should be used any time a signal |
| * is being shown. |
| * |
| * @param rssi The power of the signal measured in RSSI. |
| * @param numLevels The number of levels to consider in the calculated |
| * level. |
| * @return A level of the signal, given in the range of 0 to numLevels-1 |
| * (both inclusive). |
| */ |
| public static int calculateSignalLevel(int rssi, int numLevels) { |
| if (rssi <= MIN_RSSI) { |
| return 0; |
| } else if (rssi >= MAX_RSSI) { |
| return numLevels - 1; |
| } else { |
| float inputRange = (MAX_RSSI - MIN_RSSI); |
| float outputRange = (numLevels - 1); |
| return (int)((float)(rssi - MIN_RSSI) * outputRange / inputRange); |
| } |
| } |
| |
| /** |
| * Compares two signal strengths. |
| * |
| * @param rssiA The power of the first signal measured in RSSI. |
| * @param rssiB The power of the second signal measured in RSSI. |
| * @return Returns <0 if the first signal is weaker than the second signal, |
| * 0 if the two signals have the same strength, and >0 if the first |
| * signal is stronger than the second signal. |
| */ |
| public static int compareSignalLevel(int rssiA, int rssiB) { |
| return rssiA - rssiB; |
| } |
| |
| /** |
| * Start AccessPoint mode with the specified |
| * configuration. If the radio is already running in |
| * AP mode, update the new configuration |
| * Note that starting in access point mode disables station |
| * mode operation |
| * @param wifiConfig SSID, security and channel details as |
| * part of WifiConfiguration |
| * @return {@code true} if the operation succeeds, {@code false} otherwise |
| * |
| * @hide Dont open up yet |
| */ |
| public boolean setWifiApEnabled(WifiConfiguration wifiConfig, boolean enabled) { |
| try { |
| return mService.setWifiApEnabled(wifiConfig, enabled); |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Gets the Wi-Fi enabled state. |
| * @return One of {@link #WIFI_AP_STATE_DISABLED}, |
| * {@link #WIFI_AP_STATE_DISABLING}, {@link #WIFI_AP_STATE_ENABLED}, |
| * {@link #WIFI_AP_STATE_ENABLING}, {@link #WIFI_AP_STATE_FAILED} |
| * @see #isWifiApEnabled() |
| * |
| * @hide Dont open yet |
| */ |
| public int getWifiApState() { |
| try { |
| return mService.getWifiApEnabledState(); |
| } catch (RemoteException e) { |
| return WIFI_AP_STATE_FAILED; |
| } |
| } |
| |
| /** |
| * Return whether Wi-Fi AP is enabled or disabled. |
| * @return {@code true} if Wi-Fi AP is enabled |
| * @see #getWifiApState() |
| * |
| * @hide Dont open yet |
| */ |
| public boolean isWifiApEnabled() { |
| return getWifiApState() == WIFI_AP_STATE_ENABLED; |
| } |
| |
| /** |
| * Gets the Wi-Fi AP Configuration. |
| * @return AP details in WifiConfiguration |
| * |
| * @hide Dont open yet |
| */ |
| public WifiConfiguration getWifiApConfiguration() { |
| try { |
| return mService.getWifiApConfiguration(); |
| } catch (RemoteException e) { |
| return null; |
| } |
| } |
| |
| /** |
| * Sets the Wi-Fi AP Configuration. |
| * @return {@code true} if the operation succeeded, {@code false} otherwise |
| * |
| * @hide Dont open yet |
| */ |
| public boolean setWifiApConfiguration(WifiConfiguration wifiConfig) { |
| try { |
| mService.setWifiApConfiguration(wifiConfig); |
| return true; |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Start the driver and connect to network. |
| * |
| * This function will over-ride WifiLock and device idle status. For example, |
| * even if the device is idle or there is only a scan-only lock held, |
| * a start wifi would mean that wifi connection is kept active until |
| * a stopWifi() is sent. |
| * |
| * This API is used by WifiStateTracker |
| * |
| * @return {@code true} if the operation succeeds else {@code false} |
| * @hide |
| */ |
| public boolean startWifi() { |
| try { |
| mService.startWifi(); |
| return true; |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Disconnect from a network (if any) and stop the driver. |
| * |
| * This function will over-ride WifiLock and device idle status. Wi-Fi |
| * stays inactive until a startWifi() is issued. |
| * |
| * This API is used by WifiStateTracker |
| * |
| * @return {@code true} if the operation succeeds else {@code false} |
| * @hide |
| */ |
| public boolean stopWifi() { |
| try { |
| mService.stopWifi(); |
| return true; |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Add a bssid to the supplicant blacklist |
| * |
| * This API is used by WifiWatchdogService |
| * |
| * @return {@code true} if the operation succeeds else {@code false} |
| * @hide |
| */ |
| public boolean addToBlacklist(String bssid) { |
| try { |
| mService.addToBlacklist(bssid); |
| return true; |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Clear the supplicant blacklist |
| * |
| * This API is used by WifiWatchdogService |
| * |
| * @return {@code true} if the operation succeeds else {@code false} |
| * @hide |
| */ |
| public boolean clearBlacklist() { |
| try { |
| mService.clearBlacklist(); |
| return true; |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /* TODO: deprecate synchronous API and open up the following API */ |
| /** |
| * Connect to a network with the given configuration. The network also |
| * gets added to the supplicant configuration. |
| * |
| * For a new network, this function is used instead of a |
| * sequence of addNetwork(), enableNetwork(), saveConfiguration() and |
| * reconnect() |
| * |
| * @param config the set of variables that describe the configuration, |
| * contained in a {@link WifiConfiguration} object. |
| * @hide |
| */ |
| public void connectNetwork(WifiConfiguration config) { |
| if (config == null) { |
| return; |
| } |
| try { |
| mService.connectNetworkWithConfig(config); |
| } catch (RemoteException e) { } |
| } |
| |
| /** |
| * Connect to a network with the given networkId. |
| * |
| * This function is used instead of a enableNetwork(), saveConfiguration() and |
| * reconnect() |
| * |
| * @param networkId the network id identifiying the network in the |
| * supplicant configuration list |
| * @hide |
| */ |
| public void connectNetwork(int networkId) { |
| if (networkId < 0) { |
| return; |
| } |
| try { |
| mService.connectNetworkWithId(networkId); |
| } catch (RemoteException e) { } |
| } |
| |
| /** |
| * Save the given network in the supplicant config. If the network already |
| * exists, the configuration is updated. A new network is enabled |
| * by default. |
| * |
| * For a new network, this function is used instead of a |
| * sequence of addNetwork(), enableNetwork() and saveConfiguration(). |
| * |
| * For an existing network, it accomplishes the task of updateNetwork() |
| * and saveConfiguration() |
| * |
| * @param config the set of variables that describe the configuration, |
| * contained in a {@link WifiConfiguration} object. |
| * @hide |
| */ |
| public void saveNetwork(WifiConfiguration config) { |
| if (config == null) { |
| return; |
| } |
| try { |
| mService.saveNetwork(config); |
| } catch (RemoteException e) { } |
| } |
| |
| /** |
| * Delete the network in the supplicant config. |
| * |
| * This function is used instead of a sequence of removeNetwork() |
| * and saveConfiguration(). |
| * |
| * @param config the set of variables that describe the configuration, |
| * contained in a {@link WifiConfiguration} object. |
| * @hide |
| */ |
| public void forgetNetwork(int netId) { |
| if (netId < 0) { |
| return; |
| } |
| try { |
| mService.forgetNetwork(netId); |
| } catch (RemoteException e) { } |
| } |
| |
| /** |
| * Start Wi-fi protected setup push button Configuration |
| * |
| * @param bssid BSSID of the access point |
| * @hide |
| */ |
| public void startWpsPbc(String bssid) { |
| try { |
| mService.startWpsPbc(bssid); |
| } catch (RemoteException e) { } |
| } |
| |
| /** |
| * Start Wi-fi Protected Setup pin method configuration |
| * |
| * @param bssid BSSID of the access point |
| * @param apPin PIN issued by the access point |
| * |
| * @hide |
| */ |
| public void startWpsPin(String bssid, int apPin) { |
| try { |
| mService.startWpsPin(bssid, apPin); |
| } catch (RemoteException e) { } |
| } |
| |
| /** |
| * Allows an application to keep the Wi-Fi radio awake. |
| * Normally the Wi-Fi radio may turn off when the user has not used the device in a while. |
| * Acquiring a WifiLock will keep the radio on until the lock is released. Multiple |
| * applications may hold WifiLocks, and the radio will only be allowed to turn off when no |
| * WifiLocks are held in any application. |
| * |
| * Before using a WifiLock, consider carefully if your application requires Wi-Fi access, or |
| * could function over a mobile network, if available. A program that needs to download large |
| * files should hold a WifiLock to ensure that the download will complete, but a program whose |
| * network usage is occasional or low-bandwidth should not hold a WifiLock to avoid adversely |
| * affecting battery life. |
| * |
| * Note that WifiLocks cannot override the user-level "Wi-Fi Enabled" setting, nor Airplane |
| * Mode. They simply keep the radio from turning off when Wi-Fi is already on but the device |
| * is idle. |
| */ |
| public class WifiLock { |
| private String mTag; |
| private final IBinder mBinder; |
| private int mRefCount; |
| int mLockType; |
| private boolean mRefCounted; |
| private boolean mHeld; |
| private WorkSource mWorkSource; |
| |
| private WifiLock(int lockType, String tag) { |
| mTag = tag; |
| mLockType = lockType; |
| mBinder = new Binder(); |
| mRefCount = 0; |
| mRefCounted = true; |
| mHeld = false; |
| } |
| |
| /** |
| * Locks the Wi-Fi radio on until {@link #release} is called. |
| * |
| * If this WifiLock is reference-counted, each call to {@code acquire} will increment the |
| * reference count, and the radio will remain locked as long as the reference count is |
| * above zero. |
| * |
| * If this WifiLock is not reference-counted, the first call to {@code acquire} will lock |
| * the radio, but subsequent calls will be ignored. Only one call to {@link #release} |
| * will be required, regardless of the number of times that {@code acquire} is called. |
| */ |
| public void acquire() { |
| synchronized (mBinder) { |
| if (mRefCounted ? (++mRefCount > 0) : (!mHeld)) { |
| try { |
| mService.acquireWifiLock(mBinder, mLockType, mTag, mWorkSource); |
| synchronized (WifiManager.this) { |
| if (mActiveLockCount >= MAX_ACTIVE_LOCKS) { |
| mService.releaseWifiLock(mBinder); |
| throw new UnsupportedOperationException( |
| "Exceeded maximum number of wifi locks"); |
| } |
| mActiveLockCount++; |
| } |
| } catch (RemoteException ignore) { |
| } |
| mHeld = true; |
| } |
| } |
| } |
| |
| /** |
| * Unlocks the Wi-Fi radio, allowing it to turn off when the device is idle. |
| * |
| * If this WifiLock is reference-counted, each call to {@code release} will decrement the |
| * reference count, and the radio will be unlocked only when the reference count reaches |
| * zero. If the reference count goes below zero (that is, if {@code release} is called |
| * a greater number of times than {@link #acquire}), an exception is thrown. |
| * |
| * If this WifiLock is not reference-counted, the first call to {@code release} (after |
| * the radio was locked using {@link #acquire}) will unlock the radio, and subsequent |
| * calls will be ignored. |
| */ |
| public void release() { |
| synchronized (mBinder) { |
| if (mRefCounted ? (--mRefCount == 0) : (mHeld)) { |
| try { |
| mService.releaseWifiLock(mBinder); |
| synchronized (WifiManager.this) { |
| mActiveLockCount--; |
| } |
| } catch (RemoteException ignore) { |
| } |
| mHeld = false; |
| } |
| if (mRefCount < 0) { |
| throw new RuntimeException("WifiLock under-locked " + mTag); |
| } |
| } |
| } |
| |
| /** |
| * Controls whether this is a reference-counted or non-reference-counted WifiLock. |
| * |
| * Reference-counted WifiLocks keep track of the number of calls to {@link #acquire} and |
| * {@link #release}, and only allow the radio to sleep when every call to {@link #acquire} |
| * has been balanced with a call to {@link #release}. Non-reference-counted WifiLocks |
| * lock the radio whenever {@link #acquire} is called and it is unlocked, and unlock the |
| * radio whenever {@link #release} is called and it is locked. |
| * |
| * @param refCounted true if this WifiLock should keep a reference count |
| */ |
| public void setReferenceCounted(boolean refCounted) { |
| mRefCounted = refCounted; |
| } |
| |
| /** |
| * Checks whether this WifiLock is currently held. |
| * |
| * @return true if this WifiLock is held, false otherwise |
| */ |
| public boolean isHeld() { |
| synchronized (mBinder) { |
| return mHeld; |
| } |
| } |
| |
| public void setWorkSource(WorkSource ws) { |
| synchronized (mBinder) { |
| if (ws != null && ws.size() == 0) { |
| ws = null; |
| } |
| boolean changed = true; |
| if (ws == null) { |
| mWorkSource = null; |
| } else if (mWorkSource == null) { |
| changed = mWorkSource != null; |
| mWorkSource = new WorkSource(ws); |
| } else { |
| changed = mWorkSource.diff(ws); |
| if (changed) { |
| mWorkSource.set(ws); |
| } |
| } |
| if (changed && mHeld) { |
| try { |
| mService.updateWifiLockWorkSource(mBinder, mWorkSource); |
| } catch (RemoteException e) { |
| } |
| } |
| } |
| } |
| |
| public String toString() { |
| String s1, s2, s3; |
| synchronized (mBinder) { |
| s1 = Integer.toHexString(System.identityHashCode(this)); |
| s2 = mHeld ? "held; " : ""; |
| if (mRefCounted) { |
| s3 = "refcounted: refcount = " + mRefCount; |
| } else { |
| s3 = "not refcounted"; |
| } |
| return "WifiLock{ " + s1 + "; " + s2 + s3 + " }"; |
| } |
| } |
| |
| @Override |
| protected void finalize() throws Throwable { |
| super.finalize(); |
| synchronized (mBinder) { |
| if (mHeld) { |
| try { |
| mService.releaseWifiLock(mBinder); |
| synchronized (WifiManager.this) { |
| mActiveLockCount--; |
| } |
| } catch (RemoteException ignore) { |
| } |
| } |
| } |
| } |
| } |
| |
| /** |
| * Creates a new WifiLock. |
| * |
| * @param lockType the type of lock to create. See {@link #WIFI_MODE_FULL} and |
| * {@link #WIFI_MODE_SCAN_ONLY} for descriptions of the types of Wi-Fi locks. |
| * @param tag a tag for the WifiLock to identify it in debugging messages. This string is |
| * never shown to the user under normal conditions, but should be descriptive |
| * enough to identify your application and the specific WifiLock within it, if it |
| * holds multiple WifiLocks. |
| * |
| * @return a new, unacquired WifiLock with the given tag. |
| * |
| * @see WifiLock |
| */ |
| public WifiLock createWifiLock(int lockType, String tag) { |
| return new WifiLock(lockType, tag); |
| } |
| |
| /** |
| * Creates a new WifiLock. |
| * |
| * @param tag a tag for the WifiLock to identify it in debugging messages. This string is |
| * never shown to the user under normal conditions, but should be descriptive |
| * enough to identify your application and the specific WifiLock within it, if it |
| * holds multiple WifiLocks. |
| * |
| * @return a new, unacquired WifiLock with the given tag. |
| * |
| * @see WifiLock |
| */ |
| public WifiLock createWifiLock(String tag) { |
| return new WifiLock(WIFI_MODE_FULL, tag); |
| } |
| |
| |
| /** |
| * Create a new MulticastLock |
| * |
| * @param tag a tag for the MulticastLock to identify it in debugging |
| * messages. This string is never shown to the user under |
| * normal conditions, but should be descriptive enough to |
| * identify your application and the specific MulticastLock |
| * within it, if it holds multiple MulticastLocks. |
| * |
| * @return a new, unacquired MulticastLock with the given tag. |
| * |
| * @see MulticastLock |
| */ |
| public MulticastLock createMulticastLock(String tag) { |
| return new MulticastLock(tag); |
| } |
| |
| /** |
| * Allows an application to receive Wifi Multicast packets. |
| * Normally the Wifi stack filters out packets not explicitly |
| * addressed to this device. Acquring a MulticastLock will |
| * cause the stack to receive packets addressed to multicast |
| * addresses. Processing these extra packets can cause a noticable |
| * battery drain and should be disabled when not needed. |
| */ |
| public class MulticastLock { |
| private String mTag; |
| private final IBinder mBinder; |
| private int mRefCount; |
| private boolean mRefCounted; |
| private boolean mHeld; |
| |
| private MulticastLock(String tag) { |
| mTag = tag; |
| mBinder = new Binder(); |
| mRefCount = 0; |
| mRefCounted = true; |
| mHeld = false; |
| } |
| |
| /** |
| * Locks Wifi Multicast on until {@link #release} is called. |
| * |
| * If this MulticastLock is reference-counted each call to |
| * {@code acquire} will increment the reference count, and the |
| * wifi interface will receive multicast packets as long as the |
| * reference count is above zero. |
| * |
| * If this MulticastLock is not reference-counted, the first call to |
| * {@code acquire} will turn on the multicast packets, but subsequent |
| * calls will be ignored. Only one call to {@link #release} will |
| * be required, regardless of the number of times that {@code acquire} |
| * is called. |
| * |
| * Note that other applications may also lock Wifi Multicast on. |
| * Only they can relinquish their lock. |
| * |
| * Also note that applications cannot leave Multicast locked on. |
| * When an app exits or crashes, any Multicast locks will be released. |
| */ |
| public void acquire() { |
| synchronized (mBinder) { |
| if (mRefCounted ? (++mRefCount > 0) : (!mHeld)) { |
| try { |
| mService.acquireMulticastLock(mBinder, mTag); |
| synchronized (WifiManager.this) { |
| if (mActiveLockCount >= MAX_ACTIVE_LOCKS) { |
| mService.releaseMulticastLock(); |
| throw new UnsupportedOperationException( |
| "Exceeded maximum number of wifi locks"); |
| } |
| mActiveLockCount++; |
| } |
| } catch (RemoteException ignore) { |
| } |
| mHeld = true; |
| } |
| } |
| } |
| |
| /** |
| * Unlocks Wifi Multicast, restoring the filter of packets |
| * not addressed specifically to this device and saving power. |
| * |
| * If this MulticastLock is reference-counted, each call to |
| * {@code release} will decrement the reference count, and the |
| * multicast packets will only stop being received when the reference |
| * count reaches zero. If the reference count goes below zero (that |
| * is, if {@code release} is called a greater number of times than |
| * {@link #acquire}), an exception is thrown. |
| * |
| * If this MulticastLock is not reference-counted, the first call to |
| * {@code release} (after the radio was multicast locked using |
| * {@link #acquire}) will unlock the multicast, and subsequent calls |
| * will be ignored. |
| * |
| * Note that if any other Wifi Multicast Locks are still outstanding |
| * this {@code release} call will not have an immediate effect. Only |
| * when all applications have released all their Multicast Locks will |
| * the Multicast filter be turned back on. |
| * |
| * Also note that when an app exits or crashes all of its Multicast |
| * Locks will be automatically released. |
| */ |
| public void release() { |
| synchronized (mBinder) { |
| if (mRefCounted ? (--mRefCount == 0) : (mHeld)) { |
| try { |
| mService.releaseMulticastLock(); |
| synchronized (WifiManager.this) { |
| mActiveLockCount--; |
| } |
| } catch (RemoteException ignore) { |
| } |
| mHeld = false; |
| } |
| if (mRefCount < 0) { |
| throw new RuntimeException("MulticastLock under-locked " |
| + mTag); |
| } |
| } |
| } |
| |
| /** |
| * Controls whether this is a reference-counted or non-reference- |
| * counted MulticastLock. |
| * |
| * Reference-counted MulticastLocks keep track of the number of calls |
| * to {@link #acquire} and {@link #release}, and only stop the |
| * reception of multicast packets when every call to {@link #acquire} |
| * has been balanced with a call to {@link #release}. Non-reference- |
| * counted MulticastLocks allow the reception of multicast packets |
| * whenever {@link #acquire} is called and stop accepting multicast |
| * packets whenever {@link #release} is called. |
| * |
| * @param refCounted true if this MulticastLock should keep a reference |
| * count |
| */ |
| public void setReferenceCounted(boolean refCounted) { |
| mRefCounted = refCounted; |
| } |
| |
| /** |
| * Checks whether this MulticastLock is currently held. |
| * |
| * @return true if this MulticastLock is held, false otherwise |
| */ |
| public boolean isHeld() { |
| synchronized (mBinder) { |
| return mHeld; |
| } |
| } |
| |
| public String toString() { |
| String s1, s2, s3; |
| synchronized (mBinder) { |
| s1 = Integer.toHexString(System.identityHashCode(this)); |
| s2 = mHeld ? "held; " : ""; |
| if (mRefCounted) { |
| s3 = "refcounted: refcount = " + mRefCount; |
| } else { |
| s3 = "not refcounted"; |
| } |
| return "MulticastLock{ " + s1 + "; " + s2 + s3 + " }"; |
| } |
| } |
| |
| @Override |
| protected void finalize() throws Throwable { |
| super.finalize(); |
| setReferenceCounted(false); |
| release(); |
| } |
| } |
| |
| /** |
| * Check multicast filter status. |
| * |
| * @return true if multicast packets are allowed. |
| * |
| * @hide pending API council approval |
| */ |
| public boolean isMulticastEnabled() { |
| try { |
| return mService.isMulticastEnabled(); |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| |
| /** |
| * Initialize the multicast filtering to 'on' |
| * @hide no intent to publish |
| */ |
| public boolean initializeMulticastFiltering() { |
| try { |
| mService.initializeMulticastFiltering(); |
| return true; |
| } catch (RemoteException e) { |
| return false; |
| } |
| } |
| } |