| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef ANDROID_HARDWARE_CAMERA_HARDWARE_INTERFACE_H |
| #define ANDROID_HARDWARE_CAMERA_HARDWARE_INTERFACE_H |
| |
| #include <binder/IMemory.h> |
| #include <binder/MemoryBase.h> |
| #include <binder/MemoryHeapBase.h> |
| #include <utils/RefBase.h> |
| #include <ui/GraphicBuffer.h> |
| #include <camera/Camera.h> |
| #include <camera/CameraParameters.h> |
| #include <system/window.h> |
| #include <hardware/camera.h> |
| |
| namespace android { |
| |
| typedef void (*notify_callback)(int32_t msgType, |
| int32_t ext1, |
| int32_t ext2, |
| void* user); |
| |
| typedef void (*data_callback)(int32_t msgType, |
| const sp<IMemory> &dataPtr, |
| camera_frame_metadata_t *metadata, |
| void* user); |
| |
| typedef void (*data_callback_timestamp)(nsecs_t timestamp, |
| int32_t msgType, |
| const sp<IMemory> &dataPtr, |
| void *user); |
| |
| /** |
| * CameraHardwareInterface.h defines the interface to the |
| * camera hardware abstraction layer, used for setting and getting |
| * parameters, live previewing, and taking pictures. |
| * |
| * It is a referenced counted interface with RefBase as its base class. |
| * CameraService calls openCameraHardware() to retrieve a strong pointer to the |
| * instance of this interface and may be called multiple times. The |
| * following steps describe a typical sequence: |
| * |
| * -# After CameraService calls openCameraHardware(), getParameters() and |
| * setParameters() are used to initialize the camera instance. |
| * CameraService calls getPreviewHeap() to establish access to the |
| * preview heap so it can be registered with SurfaceFlinger for |
| * efficient display updating while in preview mode. |
| * -# startPreview() is called. The camera instance then periodically |
| * sends the message CAMERA_MSG_PREVIEW_FRAME (if enabled) each time |
| * a new preview frame is available. If data callback code needs to use |
| * this memory after returning, it must copy the data. |
| * |
| * Prior to taking a picture, CameraService calls autofocus(). When auto |
| * focusing has completed, the camera instance sends a CAMERA_MSG_FOCUS notification, |
| * which informs the application whether focusing was successful. The camera instance |
| * only sends this message once and it is up to the application to call autoFocus() |
| * again if refocusing is desired. |
| * |
| * CameraService calls takePicture() to request the camera instance take a |
| * picture. At this point, if a shutter, postview, raw, and/or compressed callback |
| * is desired, the corresponding message must be enabled. As with CAMERA_MSG_PREVIEW_FRAME, |
| * any memory provided in a data callback must be copied if it's needed after returning. |
| */ |
| |
| class CameraHardwareInterface : public virtual RefBase { |
| public: |
| CameraHardwareInterface(const char *name) |
| { |
| mDevice = 0; |
| mName = name; |
| } |
| |
| ~CameraHardwareInterface() |
| { |
| ALOGI("Destroying camera %s", mName.string()); |
| if(mDevice) { |
| int rc = mDevice->common.close(&mDevice->common); |
| if (rc != OK) |
| ALOGE("Could not close camera %s: %d", mName.string(), rc); |
| } |
| } |
| |
| status_t initialize(hw_module_t *module) |
| { |
| ALOGI("Opening camera %s", mName.string()); |
| int rc = module->methods->open(module, mName.string(), |
| (hw_device_t **)&mDevice); |
| if (rc != OK) { |
| ALOGE("Could not open camera %s: %d", mName.string(), rc); |
| return rc; |
| } |
| initHalPreviewWindow(); |
| return rc; |
| } |
| |
| /** Set the ANativeWindow to which preview frames are sent */ |
| status_t setPreviewWindow(const sp<ANativeWindow>& buf) |
| { |
| ALOGV("%s(%s) buf %p", __FUNCTION__, mName.string(), buf.get()); |
| |
| if (mDevice->ops->set_preview_window) { |
| mPreviewWindow = buf; |
| mHalPreviewWindow.user = this; |
| ALOGV("%s &mHalPreviewWindow %p mHalPreviewWindow.user %p", __FUNCTION__, |
| &mHalPreviewWindow, mHalPreviewWindow.user); |
| return mDevice->ops->set_preview_window(mDevice, |
| buf.get() ? &mHalPreviewWindow.nw : 0); |
| } |
| return INVALID_OPERATION; |
| } |
| |
| /** Set the notification and data callbacks */ |
| void setCallbacks(notify_callback notify_cb, |
| data_callback data_cb, |
| data_callback_timestamp data_cb_timestamp, |
| void* user) |
| { |
| mNotifyCb = notify_cb; |
| mDataCb = data_cb; |
| mDataCbTimestamp = data_cb_timestamp; |
| mCbUser = user; |
| |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| |
| if (mDevice->ops->set_callbacks) { |
| mDevice->ops->set_callbacks(mDevice, |
| __notify_cb, |
| __data_cb, |
| __data_cb_timestamp, |
| __get_memory, |
| this); |
| } |
| } |
| |
| /** |
| * The following three functions all take a msgtype, |
| * which is a bitmask of the messages defined in |
| * include/ui/Camera.h |
| */ |
| |
| /** |
| * Enable a message, or set of messages. |
| */ |
| void enableMsgType(int32_t msgType) |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->enable_msg_type) |
| mDevice->ops->enable_msg_type(mDevice, msgType); |
| } |
| |
| /** |
| * Disable a message, or a set of messages. |
| * |
| * Once received a call to disableMsgType(CAMERA_MSG_VIDEO_FRAME), camera hal |
| * should not rely on its client to call releaseRecordingFrame() to release |
| * video recording frames sent out by the cameral hal before and after the |
| * disableMsgType(CAMERA_MSG_VIDEO_FRAME) call. Camera hal clients must not |
| * modify/access any video recording frame after calling |
| * disableMsgType(CAMERA_MSG_VIDEO_FRAME). |
| */ |
| void disableMsgType(int32_t msgType) |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->disable_msg_type) |
| mDevice->ops->disable_msg_type(mDevice, msgType); |
| } |
| |
| /** |
| * Query whether a message, or a set of messages, is enabled. |
| * Note that this is operates as an AND, if any of the messages |
| * queried are off, this will return false. |
| */ |
| int msgTypeEnabled(int32_t msgType) |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->msg_type_enabled) |
| return mDevice->ops->msg_type_enabled(mDevice, msgType); |
| return false; |
| } |
| |
| /** |
| * Start preview mode. |
| */ |
| status_t startPreview() |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->start_preview) |
| return mDevice->ops->start_preview(mDevice); |
| return INVALID_OPERATION; |
| } |
| |
| /** |
| * Stop a previously started preview. |
| */ |
| void stopPreview() |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->stop_preview) |
| mDevice->ops->stop_preview(mDevice); |
| } |
| |
| /** |
| * Returns true if preview is enabled. |
| */ |
| int previewEnabled() |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->preview_enabled) |
| return mDevice->ops->preview_enabled(mDevice); |
| return false; |
| } |
| |
| /** |
| * Request the camera hal to store meta data or real YUV data in |
| * the video buffers send out via CAMERA_MSG_VIDEO_FRRAME for a |
| * recording session. If it is not called, the default camera |
| * hal behavior is to store real YUV data in the video buffers. |
| * |
| * This method should be called before startRecording() in order |
| * to be effective. |
| * |
| * If meta data is stored in the video buffers, it is up to the |
| * receiver of the video buffers to interpret the contents and |
| * to find the actual frame data with the help of the meta data |
| * in the buffer. How this is done is outside of the scope of |
| * this method. |
| * |
| * Some camera hal may not support storing meta data in the video |
| * buffers, but all camera hal should support storing real YUV data |
| * in the video buffers. If the camera hal does not support storing |
| * the meta data in the video buffers when it is requested to do |
| * do, INVALID_OPERATION must be returned. It is very useful for |
| * the camera hal to pass meta data rather than the actual frame |
| * data directly to the video encoder, since the amount of the |
| * uncompressed frame data can be very large if video size is large. |
| * |
| * @param enable if true to instruct the camera hal to store |
| * meta data in the video buffers; false to instruct |
| * the camera hal to store real YUV data in the video |
| * buffers. |
| * |
| * @return OK on success. |
| */ |
| |
| status_t storeMetaDataInBuffers(int enable) |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->store_meta_data_in_buffers) |
| return mDevice->ops->store_meta_data_in_buffers(mDevice, enable); |
| return enable ? INVALID_OPERATION: OK; |
| } |
| |
| /** |
| * Start record mode. When a record image is available a CAMERA_MSG_VIDEO_FRAME |
| * message is sent with the corresponding frame. Every record frame must be released |
| * by a cameral hal client via releaseRecordingFrame() before the client calls |
| * disableMsgType(CAMERA_MSG_VIDEO_FRAME). After the client calls |
| * disableMsgType(CAMERA_MSG_VIDEO_FRAME), it is camera hal's responsibility |
| * to manage the life-cycle of the video recording frames, and the client must |
| * not modify/access any video recording frames. |
| */ |
| status_t startRecording() |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->start_recording) |
| return mDevice->ops->start_recording(mDevice); |
| return INVALID_OPERATION; |
| } |
| |
| /** |
| * Stop a previously started recording. |
| */ |
| void stopRecording() |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->stop_recording) |
| mDevice->ops->stop_recording(mDevice); |
| } |
| |
| /** |
| * Returns true if recording is enabled. |
| */ |
| int recordingEnabled() |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->recording_enabled) |
| return mDevice->ops->recording_enabled(mDevice); |
| return false; |
| } |
| |
| /** |
| * Release a record frame previously returned by CAMERA_MSG_VIDEO_FRAME. |
| * |
| * It is camera hal client's responsibility to release video recording |
| * frames sent out by the camera hal before the camera hal receives |
| * a call to disableMsgType(CAMERA_MSG_VIDEO_FRAME). After it receives |
| * the call to disableMsgType(CAMERA_MSG_VIDEO_FRAME), it is camera hal's |
| * responsibility of managing the life-cycle of the video recording |
| * frames. |
| */ |
| void releaseRecordingFrame(const sp<IMemory>& mem) |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->release_recording_frame) { |
| ssize_t offset; |
| size_t size; |
| sp<IMemoryHeap> heap = mem->getMemory(&offset, &size); |
| void *data = ((uint8_t *)heap->base()) + offset; |
| return mDevice->ops->release_recording_frame(mDevice, data); |
| } |
| } |
| |
| /** |
| * Start auto focus, the notification callback routine is called |
| * with CAMERA_MSG_FOCUS once when focusing is complete. autoFocus() |
| * will be called again if another auto focus is needed. |
| */ |
| status_t autoFocus() |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->auto_focus) |
| return mDevice->ops->auto_focus(mDevice); |
| return INVALID_OPERATION; |
| } |
| |
| /** |
| * Cancels auto-focus function. If the auto-focus is still in progress, |
| * this function will cancel it. Whether the auto-focus is in progress |
| * or not, this function will return the focus position to the default. |
| * If the camera does not support auto-focus, this is a no-op. |
| */ |
| status_t cancelAutoFocus() |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->cancel_auto_focus) |
| return mDevice->ops->cancel_auto_focus(mDevice); |
| return INVALID_OPERATION; |
| } |
| |
| /** |
| * Take a picture. |
| */ |
| status_t takePicture() |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->take_picture) |
| return mDevice->ops->take_picture(mDevice); |
| return INVALID_OPERATION; |
| } |
| |
| /** |
| * Cancel a picture that was started with takePicture. Calling this |
| * method when no picture is being taken is a no-op. |
| */ |
| status_t cancelPicture() |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->cancel_picture) |
| return mDevice->ops->cancel_picture(mDevice); |
| return INVALID_OPERATION; |
| } |
| |
| /** |
| * Set the camera parameters. This returns BAD_VALUE if any parameter is |
| * invalid or not supported. */ |
| status_t setParameters(const CameraParameters ¶ms) |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->set_parameters) |
| return mDevice->ops->set_parameters(mDevice, |
| params.flatten().string()); |
| return INVALID_OPERATION; |
| } |
| |
| /** Return the camera parameters. */ |
| CameraParameters getParameters() const |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| CameraParameters parms; |
| if (mDevice->ops->get_parameters) { |
| char *temp = mDevice->ops->get_parameters(mDevice); |
| String8 str_parms(temp); |
| if (mDevice->ops->put_parameters) |
| mDevice->ops->put_parameters(mDevice, temp); |
| else |
| free(temp); |
| parms.unflatten(str_parms); |
| } |
| return parms; |
| } |
| |
| /** |
| * Send command to camera driver. |
| */ |
| status_t sendCommand(int32_t cmd, int32_t arg1, int32_t arg2) |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->send_command) |
| return mDevice->ops->send_command(mDevice, cmd, arg1, arg2); |
| return INVALID_OPERATION; |
| } |
| |
| /** |
| * Release the hardware resources owned by this object. Note that this is |
| * *not* done in the destructor. |
| */ |
| void release() { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->release) |
| mDevice->ops->release(mDevice); |
| } |
| |
| /** |
| * Dump state of the camera hardware |
| */ |
| status_t dump(int fd, const Vector<String16>& args) const |
| { |
| ALOGV("%s(%s)", __FUNCTION__, mName.string()); |
| if (mDevice->ops->dump) |
| return mDevice->ops->dump(mDevice, fd); |
| return OK; // It's fine if the HAL doesn't implement dump() |
| } |
| |
| private: |
| camera_device_t *mDevice; |
| String8 mName; |
| |
| static void __notify_cb(int32_t msg_type, int32_t ext1, |
| int32_t ext2, void *user) |
| { |
| ALOGV("%s", __FUNCTION__); |
| CameraHardwareInterface *__this = |
| static_cast<CameraHardwareInterface *>(user); |
| __this->mNotifyCb(msg_type, ext1, ext2, __this->mCbUser); |
| } |
| |
| static void __data_cb(int32_t msg_type, |
| const camera_memory_t *data, unsigned int index, |
| camera_frame_metadata_t *metadata, |
| void *user) |
| { |
| ALOGV("%s", __FUNCTION__); |
| CameraHardwareInterface *__this = |
| static_cast<CameraHardwareInterface *>(user); |
| sp<CameraHeapMemory> mem(static_cast<CameraHeapMemory *>(data->handle)); |
| if (index >= mem->mNumBufs) { |
| ALOGE("%s: invalid buffer index %d, max allowed is %d", __FUNCTION__, |
| index, mem->mNumBufs); |
| return; |
| } |
| __this->mDataCb(msg_type, mem->mBuffers[index], metadata, __this->mCbUser); |
| } |
| |
| static void __data_cb_timestamp(nsecs_t timestamp, int32_t msg_type, |
| const camera_memory_t *data, unsigned index, |
| void *user) |
| { |
| ALOGV("%s", __FUNCTION__); |
| CameraHardwareInterface *__this = |
| static_cast<CameraHardwareInterface *>(user); |
| // Start refcounting the heap object from here on. When the clients |
| // drop all references, it will be destroyed (as well as the enclosed |
| // MemoryHeapBase. |
| sp<CameraHeapMemory> mem(static_cast<CameraHeapMemory *>(data->handle)); |
| if (index >= mem->mNumBufs) { |
| ALOGE("%s: invalid buffer index %d, max allowed is %d", __FUNCTION__, |
| index, mem->mNumBufs); |
| return; |
| } |
| __this->mDataCbTimestamp(timestamp, msg_type, mem->mBuffers[index], __this->mCbUser); |
| } |
| |
| // This is a utility class that combines a MemoryHeapBase and a MemoryBase |
| // in one. Since we tend to use them in a one-to-one relationship, this is |
| // handy. |
| |
| class CameraHeapMemory : public RefBase { |
| public: |
| CameraHeapMemory(int fd, size_t buf_size, uint_t num_buffers = 1) : |
| mBufSize(buf_size), |
| mNumBufs(num_buffers) |
| { |
| mHeap = new MemoryHeapBase(fd, buf_size * num_buffers); |
| commonInitialization(); |
| } |
| |
| CameraHeapMemory(size_t buf_size, uint_t num_buffers = 1) : |
| mBufSize(buf_size), |
| mNumBufs(num_buffers) |
| { |
| mHeap = new MemoryHeapBase(buf_size * num_buffers); |
| commonInitialization(); |
| } |
| |
| void commonInitialization() |
| { |
| handle.data = mHeap->base(); |
| handle.size = mBufSize * mNumBufs; |
| handle.handle = this; |
| |
| mBuffers = new sp<MemoryBase>[mNumBufs]; |
| for (uint_t i = 0; i < mNumBufs; i++) |
| mBuffers[i] = new MemoryBase(mHeap, |
| i * mBufSize, |
| mBufSize); |
| |
| handle.release = __put_memory; |
| } |
| |
| virtual ~CameraHeapMemory() |
| { |
| delete [] mBuffers; |
| } |
| |
| size_t mBufSize; |
| uint_t mNumBufs; |
| sp<MemoryHeapBase> mHeap; |
| sp<MemoryBase> *mBuffers; |
| |
| camera_memory_t handle; |
| }; |
| |
| static camera_memory_t* __get_memory(int fd, size_t buf_size, uint_t num_bufs, |
| void *user __attribute__((unused))) |
| { |
| CameraHeapMemory *mem; |
| if (fd < 0) |
| mem = new CameraHeapMemory(buf_size, num_bufs); |
| else |
| mem = new CameraHeapMemory(fd, buf_size, num_bufs); |
| mem->incStrong(mem); |
| return &mem->handle; |
| } |
| |
| static void __put_memory(camera_memory_t *data) |
| { |
| if (!data) |
| return; |
| |
| CameraHeapMemory *mem = static_cast<CameraHeapMemory *>(data->handle); |
| mem->decStrong(mem); |
| } |
| |
| static ANativeWindow *__to_anw(void *user) |
| { |
| CameraHardwareInterface *__this = |
| reinterpret_cast<CameraHardwareInterface *>(user); |
| return __this->mPreviewWindow.get(); |
| } |
| #define anw(n) __to_anw(((struct camera_preview_window *)n)->user) |
| |
| static int __dequeue_buffer(struct preview_stream_ops* w, |
| buffer_handle_t** buffer, int *stride) |
| { |
| int rc; |
| ANativeWindow *a = anw(w); |
| ANativeWindowBuffer* anb; |
| rc = a->dequeueBuffer(a, &anb); |
| if (!rc) { |
| *buffer = &anb->handle; |
| *stride = anb->stride; |
| } |
| return rc; |
| } |
| |
| #ifndef container_of |
| #define container_of(ptr, type, member) ({ \ |
| const typeof(((type *) 0)->member) *__mptr = (ptr); \ |
| (type *) ((char *) __mptr - (char *)(&((type *)0)->member)); }) |
| #endif |
| |
| static int __lock_buffer(struct preview_stream_ops* w, |
| buffer_handle_t* buffer) |
| { |
| ANativeWindow *a = anw(w); |
| return a->lockBuffer(a, |
| container_of(buffer, ANativeWindowBuffer, handle)); |
| } |
| |
| static int __enqueue_buffer(struct preview_stream_ops* w, |
| buffer_handle_t* buffer) |
| { |
| ANativeWindow *a = anw(w); |
| return a->queueBuffer(a, |
| container_of(buffer, ANativeWindowBuffer, handle)); |
| } |
| |
| static int __cancel_buffer(struct preview_stream_ops* w, |
| buffer_handle_t* buffer) |
| { |
| ANativeWindow *a = anw(w); |
| return a->cancelBuffer(a, |
| container_of(buffer, ANativeWindowBuffer, handle)); |
| } |
| |
| static int __set_buffer_count(struct preview_stream_ops* w, int count) |
| { |
| ANativeWindow *a = anw(w); |
| return native_window_set_buffer_count(a, count); |
| } |
| |
| static int __set_buffers_geometry(struct preview_stream_ops* w, |
| int width, int height, int format) |
| { |
| ANativeWindow *a = anw(w); |
| return native_window_set_buffers_geometry(a, |
| width, height, format); |
| } |
| |
| static int __set_crop(struct preview_stream_ops *w, |
| int left, int top, int right, int bottom) |
| { |
| ANativeWindow *a = anw(w); |
| android_native_rect_t crop; |
| crop.left = left; |
| crop.top = top; |
| crop.right = right; |
| crop.bottom = bottom; |
| return native_window_set_crop(a, &crop); |
| } |
| |
| static int __set_timestamp(struct preview_stream_ops *w, |
| int64_t timestamp) { |
| ANativeWindow *a = anw(w); |
| return native_window_set_buffers_timestamp(a, timestamp); |
| } |
| |
| static int __set_usage(struct preview_stream_ops* w, int usage) |
| { |
| ANativeWindow *a = anw(w); |
| return native_window_set_usage(a, usage); |
| } |
| |
| static int __set_swap_interval(struct preview_stream_ops *w, int interval) |
| { |
| ANativeWindow *a = anw(w); |
| return a->setSwapInterval(a, interval); |
| } |
| |
| static int __get_min_undequeued_buffer_count( |
| const struct preview_stream_ops *w, |
| int *count) |
| { |
| ANativeWindow *a = anw(w); |
| return a->query(a, NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS, count); |
| } |
| |
| void initHalPreviewWindow() |
| { |
| mHalPreviewWindow.nw.cancel_buffer = __cancel_buffer; |
| mHalPreviewWindow.nw.lock_buffer = __lock_buffer; |
| mHalPreviewWindow.nw.dequeue_buffer = __dequeue_buffer; |
| mHalPreviewWindow.nw.enqueue_buffer = __enqueue_buffer; |
| mHalPreviewWindow.nw.set_buffer_count = __set_buffer_count; |
| mHalPreviewWindow.nw.set_buffers_geometry = __set_buffers_geometry; |
| mHalPreviewWindow.nw.set_crop = __set_crop; |
| mHalPreviewWindow.nw.set_timestamp = __set_timestamp; |
| mHalPreviewWindow.nw.set_usage = __set_usage; |
| mHalPreviewWindow.nw.set_swap_interval = __set_swap_interval; |
| |
| mHalPreviewWindow.nw.get_min_undequeued_buffer_count = |
| __get_min_undequeued_buffer_count; |
| } |
| |
| sp<ANativeWindow> mPreviewWindow; |
| |
| struct camera_preview_window { |
| struct preview_stream_ops nw; |
| void *user; |
| }; |
| |
| struct camera_preview_window mHalPreviewWindow; |
| |
| notify_callback mNotifyCb; |
| data_callback mDataCb; |
| data_callback_timestamp mDataCbTimestamp; |
| void *mCbUser; |
| }; |
| |
| }; // namespace android |
| |
| #endif |