| /* |
| * Copyright (C) 2014 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_NDEBUG 0 |
| #define LOG_TAG "BootAnim_AudioPlayer" |
| |
| #include "AudioPlayer.h" |
| |
| #include <androidfw/ZipFileRO.h> |
| #include <tinyalsa/asoundlib.h> |
| #include <utils/Log.h> |
| #include <utils/String8.h> |
| |
| #define ID_RIFF 0x46464952 |
| #define ID_WAVE 0x45564157 |
| #define ID_FMT 0x20746d66 |
| #define ID_DATA 0x61746164 |
| |
| // Maximum line length for audio_conf.txt |
| // We only accept lines less than this length to avoid overflows using sscanf() |
| #define MAX_LINE_LENGTH 1024 |
| |
| struct riff_wave_header { |
| uint32_t riff_id; |
| uint32_t riff_sz; |
| uint32_t wave_id; |
| }; |
| |
| struct chunk_header { |
| uint32_t id; |
| uint32_t sz; |
| }; |
| |
| struct chunk_fmt { |
| uint16_t audio_format; |
| uint16_t num_channels; |
| uint32_t sample_rate; |
| uint32_t byte_rate; |
| uint16_t block_align; |
| uint16_t bits_per_sample; |
| }; |
| |
| |
| namespace android { |
| |
| AudioPlayer::AudioPlayer() |
| : mCard(-1), |
| mDevice(-1), |
| mPeriodSize(0), |
| mPeriodCount(0), |
| mCurrentFile(NULL) |
| { |
| } |
| |
| AudioPlayer::~AudioPlayer() { |
| } |
| |
| static bool setMixerValue(struct mixer* mixer, const char* name, const char* values) |
| { |
| if (!mixer) { |
| ALOGE("no mixer in setMixerValue"); |
| return false; |
| } |
| struct mixer_ctl *ctl = mixer_get_ctl_by_name(mixer, name); |
| if (!ctl) { |
| ALOGE("mixer_get_ctl_by_name failed for %s", name); |
| return false; |
| } |
| |
| enum mixer_ctl_type type = mixer_ctl_get_type(ctl); |
| int numValues = mixer_ctl_get_num_values(ctl); |
| int intValue; |
| char stringValue[MAX_LINE_LENGTH]; |
| |
| for (int i = 0; i < numValues && values; i++) { |
| // strip leading space |
| while (*values == ' ') values++; |
| if (*values == 0) break; |
| |
| switch (type) { |
| case MIXER_CTL_TYPE_BOOL: |
| case MIXER_CTL_TYPE_INT: |
| if (sscanf(values, "%d", &intValue) == 1) { |
| if (mixer_ctl_set_value(ctl, i, intValue) != 0) { |
| ALOGE("mixer_ctl_set_value failed for %s %d", name, intValue); |
| } |
| } else { |
| ALOGE("Could not parse %s as int for %d", intValue, name); |
| } |
| break; |
| case MIXER_CTL_TYPE_ENUM: |
| if (sscanf(values, "%s", stringValue) == 1) { |
| if (mixer_ctl_set_enum_by_string(ctl, stringValue) != 0) { |
| ALOGE("mixer_ctl_set_enum_by_string failed for %s %%s", name, stringValue); |
| } |
| } else { |
| ALOGE("Could not parse %s as enum for %d", stringValue, name); |
| } |
| break; |
| default: |
| ALOGE("unsupported mixer type %d for %s", type, name); |
| break; |
| } |
| |
| values = strchr(values, ' '); |
| } |
| |
| return true; |
| } |
| |
| |
| /* |
| * Parse the audio configuration file. |
| * The file is named audio_conf.txt and must begin with the following header: |
| * |
| * card=<ALSA card number> |
| * device=<ALSA device number> |
| * period_size=<period size> |
| * period_count=<period count> |
| * |
| * This header is followed by zero or more mixer settings, each with the format: |
| * mixer "<name>" = <value list> |
| * Since mixer names can contain spaces, the name must be enclosed in double quotes. |
| * The values in the value list can be integers, booleans (represented by 0 or 1) |
| * or strings for enum values. |
| */ |
| bool AudioPlayer::init(const char* config) |
| { |
| int tempInt; |
| struct mixer* mixer = NULL; |
| char name[MAX_LINE_LENGTH]; |
| |
| for (;;) { |
| const char* endl = strstr(config, "\n"); |
| if (!endl) break; |
| String8 line(config, endl - config); |
| if (line.length() >= MAX_LINE_LENGTH) { |
| ALOGE("Line too long in audio_conf.txt"); |
| return false; |
| } |
| const char* l = line.string(); |
| |
| if (sscanf(l, "card=%d", &tempInt) == 1) { |
| ALOGD("card=%d", tempInt); |
| mCard = tempInt; |
| |
| mixer = mixer_open(mCard); |
| if (!mixer) { |
| ALOGE("could not open mixer for card %d", mCard); |
| return false; |
| } |
| } else if (sscanf(l, "device=%d", &tempInt) == 1) { |
| ALOGD("device=%d", tempInt); |
| mDevice = tempInt; |
| } else if (sscanf(l, "period_size=%d", &tempInt) == 1) { |
| ALOGD("period_size=%d", tempInt); |
| mPeriodSize = tempInt; |
| } else if (sscanf(l, "period_count=%d", &tempInt) == 1) { |
| ALOGD("period_count=%d", tempInt); |
| mPeriodCount = tempInt; |
| } else if (sscanf(l, "mixer \"%[0-9a-zA-Z _]s\"", name) == 1) { |
| const char* values = strchr(l, '='); |
| if (values) { |
| values++; // skip '=' |
| ALOGD("name: \"%s\" = %s", name, values); |
| setMixerValue(mixer, name, values); |
| } else { |
| ALOGE("values missing for name: \"%s\"", name); |
| } |
| } |
| config = ++endl; |
| } |
| |
| mixer_close(mixer); |
| |
| if (mCard >= 0 && mDevice >= 0) { |
| return true; |
| } |
| |
| return false; |
| } |
| |
| void AudioPlayer::playFile(struct FileMap* fileMap) { |
| // stop any currently playing sound |
| requestExitAndWait(); |
| |
| mCurrentFile = fileMap; |
| run("bootanim audio", PRIORITY_URGENT_AUDIO); |
| } |
| |
| bool AudioPlayer::threadLoop() |
| { |
| struct pcm_config config; |
| struct pcm *pcm = NULL; |
| bool moreChunks = true; |
| const struct chunk_fmt* chunkFmt = NULL; |
| void* buffer = NULL; |
| int bufferSize; |
| const uint8_t* wavData; |
| size_t wavLength; |
| const struct riff_wave_header* wavHeader; |
| |
| if (mCurrentFile == NULL) { |
| ALOGE("mCurrentFile is NULL"); |
| return false; |
| } |
| |
| wavData = (const uint8_t *)mCurrentFile->getDataPtr(); |
| if (!wavData) { |
| ALOGE("Could not access WAV file data"); |
| goto exit; |
| } |
| wavLength = mCurrentFile->getDataLength(); |
| |
| wavHeader = (const struct riff_wave_header *)wavData; |
| if (wavLength < sizeof(*wavHeader) || (wavHeader->riff_id != ID_RIFF) || |
| (wavHeader->wave_id != ID_WAVE)) { |
| ALOGE("Error: audio file is not a riff/wave file\n"); |
| goto exit; |
| } |
| wavData += sizeof(*wavHeader); |
| wavLength -= sizeof(*wavHeader); |
| |
| do { |
| const struct chunk_header* chunkHeader = (const struct chunk_header*)wavData; |
| if (wavLength < sizeof(*chunkHeader)) { |
| ALOGE("EOF reading chunk headers"); |
| goto exit; |
| } |
| |
| wavData += sizeof(*chunkHeader); |
| wavLength -= sizeof(*chunkHeader); |
| |
| switch (chunkHeader->id) { |
| case ID_FMT: |
| chunkFmt = (const struct chunk_fmt *)wavData; |
| wavData += chunkHeader->sz; |
| wavLength -= chunkHeader->sz; |
| break; |
| case ID_DATA: |
| /* Stop looking for chunks */ |
| moreChunks = 0; |
| break; |
| default: |
| /* Unknown chunk, skip bytes */ |
| wavData += chunkHeader->sz; |
| wavLength -= chunkHeader->sz; |
| } |
| } while (moreChunks); |
| |
| if (!chunkFmt) { |
| ALOGE("format not found in WAV file"); |
| goto exit; |
| } |
| |
| |
| memset(&config, 0, sizeof(config)); |
| config.channels = chunkFmt->num_channels; |
| config.rate = chunkFmt->sample_rate; |
| config.period_size = mPeriodSize; |
| config.period_count = mPeriodCount; |
| config.start_threshold = mPeriodSize / 4; |
| config.stop_threshold = INT_MAX; |
| config.avail_min = config.start_threshold; |
| if (chunkFmt->bits_per_sample != 16) { |
| ALOGE("only 16 bit WAV files are supported"); |
| goto exit; |
| } |
| config.format = PCM_FORMAT_S16_LE; |
| |
| pcm = pcm_open(mCard, mDevice, PCM_OUT, &config); |
| if (!pcm || !pcm_is_ready(pcm)) { |
| ALOGE("Unable to open PCM device (%s)\n", pcm_get_error(pcm)); |
| goto exit; |
| } |
| |
| bufferSize = pcm_frames_to_bytes(pcm, pcm_get_buffer_size(pcm)); |
| |
| while (wavLength > 0) { |
| if (exitPending()) goto exit; |
| size_t count = bufferSize; |
| if (count > wavLength) |
| count = wavLength; |
| |
| if (pcm_write(pcm, wavData, count)) { |
| ALOGE("pcm_write failed (%s)", pcm_get_error(pcm)); |
| goto exit; |
| } |
| wavData += count; |
| wavLength -= count; |
| } |
| |
| exit: |
| if (pcm) |
| pcm_close(pcm); |
| mCurrentFile->release(); |
| mCurrentFile = NULL; |
| return false; |
| } |
| |
| } // namespace android |