| /* |
| * Copyright (C) 2010 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <stdio.h> |
| #include <stdint.h> |
| #include <string.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <sys/epoll.h> |
| #include <sys/types.h> |
| #include <sys/socket.h> |
| #include <sys/stat.h> |
| #include <sys/time.h> |
| #include <time.h> |
| #include <arpa/inet.h> |
| #include <netinet/in.h> |
| |
| #define LOG_TAG "AudioGroup" |
| #include <cutils/atomic.h> |
| #include <cutils/properties.h> |
| #include <utils/Log.h> |
| #include <utils/Errors.h> |
| #include <utils/RefBase.h> |
| #include <utils/threads.h> |
| #include <utils/SystemClock.h> |
| #include <media/AudioSystem.h> |
| #include <media/AudioRecord.h> |
| #include <media/AudioTrack.h> |
| #include <media/mediarecorder.h> |
| |
| #include "jni.h" |
| #include "JNIHelp.h" |
| |
| #include "AudioCodec.h" |
| #include "EchoSuppressor.h" |
| |
| extern int parse(JNIEnv *env, jstring jAddress, int port, sockaddr_storage *ss); |
| |
| namespace { |
| |
| using namespace android; |
| |
| int gRandom = -1; |
| |
| // We use a circular array to implement jitter buffer. The simplest way is doing |
| // a modulo operation on the index while accessing the array. However modulo can |
| // be expensive on some platforms, such as ARM. Thus we round up the size of the |
| // array to the nearest power of 2 and then use bitwise-and instead of modulo. |
| // Currently we make it 512ms long and assume packet interval is 40ms or less. |
| // The first 80ms is the place where samples get mixed. The rest 432ms is the |
| // real jitter buffer. For a stream at 8000Hz it takes 8192 bytes. These numbers |
| // are chosen by experiments and each of them can be adjusted as needed. |
| |
| // Originally a stream does not send packets when it is receive-only or there is |
| // nothing to mix. However, this causes some problems with certain firewalls and |
| // proxies. A firewall might remove a port mapping when there is no outgoing |
| // packet for a preiod of time, and a proxy might wait for incoming packets from |
| // both sides before start forwarding. To solve these problems, we send out a |
| // silence packet on the stream for every second. It should be good enough to |
| // keep the stream alive with relatively low resources. |
| |
| // Other notes: |
| // + We use elapsedRealtime() to get the time. Since we use 32bit variables |
| // instead of 64bit ones, comparison must be done by subtraction. |
| // + Sampling rate must be multiple of 1000Hz, and packet length must be in |
| // milliseconds. No floating points. |
| // + If we cannot get enough CPU, we drop samples and simulate packet loss. |
| // + Resampling is not done yet, so streams in one group must use the same rate. |
| // For the first release only 8000Hz is supported. |
| |
| #define BUFFER_SIZE 512 |
| #define HISTORY_SIZE 80 |
| #define MEASURE_PERIOD 2000 |
| |
| class AudioStream |
| { |
| public: |
| AudioStream(); |
| ~AudioStream(); |
| bool set(int mode, int socket, sockaddr_storage *remote, |
| AudioCodec *codec, int sampleRate, int sampleCount, |
| int codecType, int dtmfType); |
| |
| void sendDtmf(int event); |
| bool mix(int32_t *output, int head, int tail, int sampleRate); |
| void encode(int tick, AudioStream *chain); |
| void decode(int tick); |
| |
| private: |
| enum { |
| NORMAL = 0, |
| SEND_ONLY = 1, |
| RECEIVE_ONLY = 2, |
| LAST_MODE = 2, |
| }; |
| |
| int mMode; |
| int mSocket; |
| sockaddr_storage mRemote; |
| AudioCodec *mCodec; |
| uint32_t mCodecMagic; |
| uint32_t mDtmfMagic; |
| bool mFixRemote; |
| |
| int mTick; |
| int mSampleRate; |
| int mSampleCount; |
| int mInterval; |
| int mKeepAlive; |
| |
| int16_t *mBuffer; |
| int mBufferMask; |
| int mBufferHead; |
| int mBufferTail; |
| int mLatencyTimer; |
| int mLatencyScore; |
| |
| uint16_t mSequence; |
| uint32_t mTimestamp; |
| uint32_t mSsrc; |
| |
| int mDtmfEvent; |
| int mDtmfStart; |
| |
| AudioStream *mNext; |
| |
| friend class AudioGroup; |
| }; |
| |
| AudioStream::AudioStream() |
| { |
| mSocket = -1; |
| mCodec = NULL; |
| mBuffer = NULL; |
| mNext = NULL; |
| } |
| |
| AudioStream::~AudioStream() |
| { |
| close(mSocket); |
| delete mCodec; |
| delete [] mBuffer; |
| LOGD("stream[%d] is dead", mSocket); |
| } |
| |
| bool AudioStream::set(int mode, int socket, sockaddr_storage *remote, |
| AudioCodec *codec, int sampleRate, int sampleCount, |
| int codecType, int dtmfType) |
| { |
| if (mode < 0 || mode > LAST_MODE) { |
| return false; |
| } |
| mMode = mode; |
| |
| mCodecMagic = (0x8000 | codecType) << 16; |
| mDtmfMagic = (dtmfType == -1) ? 0 : (0x8000 | dtmfType) << 16; |
| |
| mTick = elapsedRealtime(); |
| mSampleRate = sampleRate / 1000; |
| mSampleCount = sampleCount; |
| mInterval = mSampleCount / mSampleRate; |
| |
| // Allocate jitter buffer. |
| for (mBufferMask = 8; mBufferMask < mSampleRate; mBufferMask <<= 1); |
| mBufferMask *= BUFFER_SIZE; |
| mBuffer = new int16_t[mBufferMask]; |
| --mBufferMask; |
| mBufferHead = 0; |
| mBufferTail = 0; |
| mLatencyTimer = 0; |
| mLatencyScore = 0; |
| |
| // Initialize random bits. |
| read(gRandom, &mSequence, sizeof(mSequence)); |
| read(gRandom, &mTimestamp, sizeof(mTimestamp)); |
| read(gRandom, &mSsrc, sizeof(mSsrc)); |
| |
| mDtmfEvent = -1; |
| mDtmfStart = 0; |
| |
| // Only take over these things when succeeded. |
| mSocket = socket; |
| if (codec) { |
| mRemote = *remote; |
| mCodec = codec; |
| |
| // Here we should never get an private address, but some buggy proxy |
| // servers do give us one. To solve this, we replace the address when |
| // the first time we successfully decode an incoming packet. |
| mFixRemote = false; |
| if (remote->ss_family == AF_INET) { |
| unsigned char *address = |
| (unsigned char *)&((sockaddr_in *)remote)->sin_addr; |
| if (address[0] == 10 || |
| (address[0] == 172 && (address[1] >> 4) == 1) || |
| (address[0] == 192 && address[1] == 168)) { |
| mFixRemote = true; |
| } |
| } |
| } |
| |
| LOGD("stream[%d] is configured as %s %dkHz %dms mode %d", mSocket, |
| (codec ? codec->name : "RAW"), mSampleRate, mInterval, mMode); |
| return true; |
| } |
| |
| void AudioStream::sendDtmf(int event) |
| { |
| if (mDtmfMagic != 0) { |
| mDtmfEvent = event << 24; |
| mDtmfStart = mTimestamp + mSampleCount; |
| } |
| } |
| |
| bool AudioStream::mix(int32_t *output, int head, int tail, int sampleRate) |
| { |
| if (mMode == SEND_ONLY) { |
| return false; |
| } |
| |
| if (head - mBufferHead < 0) { |
| head = mBufferHead; |
| } |
| if (tail - mBufferTail > 0) { |
| tail = mBufferTail; |
| } |
| if (tail - head <= 0) { |
| return false; |
| } |
| |
| head *= mSampleRate; |
| tail *= mSampleRate; |
| |
| if (sampleRate == mSampleRate) { |
| for (int i = head; i - tail < 0; ++i) { |
| output[i - head] += mBuffer[i & mBufferMask]; |
| } |
| } else { |
| // TODO: implement resampling. |
| return false; |
| } |
| return true; |
| } |
| |
| void AudioStream::encode(int tick, AudioStream *chain) |
| { |
| if (tick - mTick >= mInterval) { |
| // We just missed the train. Pretend that packets in between are lost. |
| int skipped = (tick - mTick) / mInterval; |
| mTick += skipped * mInterval; |
| mSequence += skipped; |
| mTimestamp += skipped * mSampleCount; |
| LOGV("stream[%d] skips %d packets", mSocket, skipped); |
| } |
| |
| tick = mTick; |
| mTick += mInterval; |
| ++mSequence; |
| mTimestamp += mSampleCount; |
| |
| // If there is an ongoing DTMF event, send it now. |
| if (mMode != RECEIVE_ONLY && mDtmfEvent != -1) { |
| int duration = mTimestamp - mDtmfStart; |
| // Make sure duration is reasonable. |
| if (duration >= 0 && duration < mSampleRate * 100) { |
| duration += mSampleCount; |
| int32_t buffer[4] = { |
| htonl(mDtmfMagic | mSequence), |
| htonl(mDtmfStart), |
| mSsrc, |
| htonl(mDtmfEvent | duration), |
| }; |
| if (duration >= mSampleRate * 100) { |
| buffer[3] |= htonl(1 << 23); |
| mDtmfEvent = -1; |
| } |
| sendto(mSocket, buffer, sizeof(buffer), MSG_DONTWAIT, |
| (sockaddr *)&mRemote, sizeof(mRemote)); |
| return; |
| } |
| mDtmfEvent = -1; |
| } |
| |
| int32_t buffer[mSampleCount + 3]; |
| int16_t samples[mSampleCount]; |
| if (mMode == RECEIVE_ONLY) { |
| if ((mTick ^ mKeepAlive) >> 10 == 0) { |
| return; |
| } |
| mKeepAlive = mTick; |
| memset(samples, 0, sizeof(samples)); |
| } else { |
| // Mix all other streams. |
| bool mixed = false; |
| memset(buffer, 0, sizeof(buffer)); |
| while (chain) { |
| if (chain != this && |
| chain->mix(buffer, tick - mInterval, tick, mSampleRate)) { |
| mixed = true; |
| } |
| chain = chain->mNext; |
| } |
| |
| if (mixed) { |
| // Saturate into 16 bits. |
| for (int i = 0; i < mSampleCount; ++i) { |
| int32_t sample = buffer[i]; |
| if (sample < -32768) { |
| sample = -32768; |
| } |
| if (sample > 32767) { |
| sample = 32767; |
| } |
| samples[i] = sample; |
| } |
| } else { |
| if ((mTick ^ mKeepAlive) >> 10 == 0) { |
| return; |
| } |
| mKeepAlive = mTick; |
| memset(samples, 0, sizeof(samples)); |
| LOGV("stream[%d] no data", mSocket); |
| } |
| } |
| |
| if (!mCodec) { |
| // Special case for device stream. |
| send(mSocket, samples, sizeof(samples), MSG_DONTWAIT); |
| return; |
| } |
| |
| // Cook the packet and send it out. |
| buffer[0] = htonl(mCodecMagic | mSequence); |
| buffer[1] = htonl(mTimestamp); |
| buffer[2] = mSsrc; |
| int length = mCodec->encode(&buffer[3], samples); |
| if (length <= 0) { |
| LOGV("stream[%d] encoder error", mSocket); |
| return; |
| } |
| sendto(mSocket, buffer, length + 12, MSG_DONTWAIT, (sockaddr *)&mRemote, |
| sizeof(mRemote)); |
| } |
| |
| void AudioStream::decode(int tick) |
| { |
| char c; |
| if (mMode == SEND_ONLY) { |
| recv(mSocket, &c, 1, MSG_DONTWAIT); |
| return; |
| } |
| |
| // Make sure mBufferHead and mBufferTail are reasonable. |
| if ((unsigned int)(tick + BUFFER_SIZE - mBufferHead) > BUFFER_SIZE * 2) { |
| mBufferHead = tick - HISTORY_SIZE; |
| mBufferTail = mBufferHead; |
| } |
| |
| if (tick - mBufferHead > HISTORY_SIZE) { |
| // Throw away outdated samples. |
| mBufferHead = tick - HISTORY_SIZE; |
| if (mBufferTail - mBufferHead < 0) { |
| mBufferTail = mBufferHead; |
| } |
| } |
| |
| // Adjust the jitter buffer if the latency keeps larger than two times of the |
| // packet interval in the past two seconds. |
| int score = mBufferTail - tick - mInterval * 2; |
| if (mLatencyScore > score) { |
| mLatencyScore = score; |
| } |
| if (mLatencyScore <= 0) { |
| mLatencyTimer = tick; |
| mLatencyScore = score; |
| } else if (tick - mLatencyTimer >= MEASURE_PERIOD) { |
| LOGV("stream[%d] reduces latency of %dms", mSocket, mLatencyScore); |
| mBufferTail -= mLatencyScore; |
| mLatencyTimer = tick; |
| } |
| |
| if (mBufferTail - mBufferHead > BUFFER_SIZE - mInterval) { |
| // Buffer overflow. Drop the packet. |
| LOGV("stream[%d] buffer overflow", mSocket); |
| recv(mSocket, &c, 1, MSG_DONTWAIT); |
| return; |
| } |
| |
| // Receive the packet and decode it. |
| int16_t samples[mSampleCount]; |
| int length = 0; |
| if (!mCodec) { |
| // Special case for device stream. |
| length = recv(mSocket, samples, sizeof(samples), |
| MSG_TRUNC | MSG_DONTWAIT) >> 1; |
| } else { |
| __attribute__((aligned(4))) uint8_t buffer[2048]; |
| sockaddr_storage remote; |
| socklen_t len = sizeof(remote); |
| |
| length = recvfrom(mSocket, buffer, sizeof(buffer), |
| MSG_TRUNC | MSG_DONTWAIT, (sockaddr *)&remote, &len); |
| |
| // Do we need to check SSRC, sequence, and timestamp? They are not |
| // reliable but at least they can be used to identify duplicates? |
| if (length < 12 || length > (int)sizeof(buffer) || |
| (ntohl(*(uint32_t *)buffer) & 0xC07F0000) != mCodecMagic) { |
| LOGV("stream[%d] malformed packet", mSocket); |
| return; |
| } |
| int offset = 12 + ((buffer[0] & 0x0F) << 2); |
| if ((buffer[0] & 0x10) != 0) { |
| offset += 4 + (ntohs(*(uint16_t *)&buffer[offset + 2]) << 2); |
| } |
| if ((buffer[0] & 0x20) != 0) { |
| length -= buffer[length - 1]; |
| } |
| length -= offset; |
| if (length >= 0) { |
| length = mCodec->decode(samples, &buffer[offset], length); |
| } |
| if (length > 0 && mFixRemote) { |
| mRemote = remote; |
| mFixRemote = false; |
| } |
| } |
| if (length <= 0) { |
| LOGV("stream[%d] decoder error", mSocket); |
| return; |
| } |
| |
| if (tick - mBufferTail > 0) { |
| // Buffer underrun. Reset the jitter buffer. |
| LOGV("stream[%d] buffer underrun", mSocket); |
| if (mBufferTail - mBufferHead <= 0) { |
| mBufferHead = tick + mInterval; |
| mBufferTail = mBufferHead; |
| } else { |
| int tail = (tick + mInterval) * mSampleRate; |
| for (int i = mBufferTail * mSampleRate; i - tail < 0; ++i) { |
| mBuffer[i & mBufferMask] = 0; |
| } |
| mBufferTail = tick + mInterval; |
| } |
| } |
| |
| // Append to the jitter buffer. |
| int tail = mBufferTail * mSampleRate; |
| for (int i = 0; i < mSampleCount; ++i) { |
| mBuffer[tail & mBufferMask] = samples[i]; |
| ++tail; |
| } |
| mBufferTail += mInterval; |
| } |
| |
| //------------------------------------------------------------------------------ |
| |
| class AudioGroup |
| { |
| public: |
| AudioGroup(); |
| ~AudioGroup(); |
| bool set(int sampleRate, int sampleCount); |
| |
| bool setMode(int mode); |
| bool sendDtmf(int event); |
| bool add(AudioStream *stream); |
| bool remove(int socket); |
| |
| private: |
| enum { |
| ON_HOLD = 0, |
| MUTED = 1, |
| NORMAL = 2, |
| ECHO_SUPPRESSION = 3, |
| LAST_MODE = 3, |
| }; |
| |
| AudioStream *mChain; |
| int mEventQueue; |
| volatile int mDtmfEvent; |
| |
| int mMode; |
| int mSampleRate; |
| int mSampleCount; |
| int mDeviceSocket; |
| |
| class NetworkThread : public Thread |
| { |
| public: |
| NetworkThread(AudioGroup *group) : Thread(false), mGroup(group) {} |
| |
| bool start() |
| { |
| if (run("Network", ANDROID_PRIORITY_AUDIO) != NO_ERROR) { |
| LOGE("cannot start network thread"); |
| return false; |
| } |
| return true; |
| } |
| |
| private: |
| AudioGroup *mGroup; |
| bool threadLoop(); |
| }; |
| sp<NetworkThread> mNetworkThread; |
| |
| class DeviceThread : public Thread |
| { |
| public: |
| DeviceThread(AudioGroup *group) : Thread(false), mGroup(group) {} |
| |
| bool start() |
| { |
| if (run("Device", ANDROID_PRIORITY_AUDIO) != NO_ERROR) { |
| LOGE("cannot start device thread"); |
| return false; |
| } |
| return true; |
| } |
| |
| private: |
| AudioGroup *mGroup; |
| bool threadLoop(); |
| }; |
| sp<DeviceThread> mDeviceThread; |
| }; |
| |
| AudioGroup::AudioGroup() |
| { |
| mMode = ON_HOLD; |
| mChain = NULL; |
| mEventQueue = -1; |
| mDtmfEvent = -1; |
| mDeviceSocket = -1; |
| mNetworkThread = new NetworkThread(this); |
| mDeviceThread = new DeviceThread(this); |
| } |
| |
| AudioGroup::~AudioGroup() |
| { |
| mNetworkThread->requestExitAndWait(); |
| mDeviceThread->requestExitAndWait(); |
| close(mEventQueue); |
| close(mDeviceSocket); |
| while (mChain) { |
| AudioStream *next = mChain->mNext; |
| delete mChain; |
| mChain = next; |
| } |
| LOGD("group[%d] is dead", mDeviceSocket); |
| } |
| |
| bool AudioGroup::set(int sampleRate, int sampleCount) |
| { |
| mEventQueue = epoll_create(2); |
| if (mEventQueue == -1) { |
| LOGE("epoll_create: %s", strerror(errno)); |
| return false; |
| } |
| |
| mSampleRate = sampleRate; |
| mSampleCount = sampleCount; |
| |
| // Create device socket. |
| int pair[2]; |
| if (socketpair(AF_UNIX, SOCK_DGRAM, 0, pair)) { |
| LOGE("socketpair: %s", strerror(errno)); |
| return false; |
| } |
| mDeviceSocket = pair[0]; |
| |
| // Create device stream. |
| mChain = new AudioStream; |
| if (!mChain->set(AudioStream::NORMAL, pair[1], NULL, NULL, |
| sampleRate, sampleCount, -1, -1)) { |
| close(pair[1]); |
| LOGE("cannot initialize device stream"); |
| return false; |
| } |
| |
| // Give device socket a reasonable timeout. |
| timeval tv; |
| tv.tv_sec = 0; |
| tv.tv_usec = 1000 * sampleCount / sampleRate * 500; |
| if (setsockopt(pair[0], SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv))) { |
| LOGE("setsockopt: %s", strerror(errno)); |
| return false; |
| } |
| |
| // Add device stream into event queue. |
| epoll_event event; |
| event.events = EPOLLIN; |
| event.data.ptr = mChain; |
| if (epoll_ctl(mEventQueue, EPOLL_CTL_ADD, pair[1], &event)) { |
| LOGE("epoll_ctl: %s", strerror(errno)); |
| return false; |
| } |
| |
| // Anything else? |
| LOGD("stream[%d] joins group[%d]", pair[1], pair[0]); |
| return true; |
| } |
| |
| bool AudioGroup::setMode(int mode) |
| { |
| if (mode < 0 || mode > LAST_MODE) { |
| return false; |
| } |
| //FIXME: temporary code to overcome echo and mic gain issues on herring board. |
| // Must be modified/removed when proper support for voice processing query and control |
| // is included in audio framework |
| char value[PROPERTY_VALUE_MAX]; |
| property_get("ro.product.board", value, ""); |
| if (mode == NORMAL && !strcmp(value, "herring")) { |
| mode = ECHO_SUPPRESSION; |
| } |
| if (mode == ECHO_SUPPRESSION && AudioSystem::getParameters( |
| 0, String8("ec_supported")) == "ec_supported=yes") { |
| mode = NORMAL; |
| } |
| if (mMode == mode) { |
| return true; |
| } |
| |
| mDeviceThread->requestExitAndWait(); |
| LOGD("group[%d] switches from mode %d to %d", mDeviceSocket, mMode, mode); |
| mMode = mode; |
| return (mode == ON_HOLD) || mDeviceThread->start(); |
| } |
| |
| bool AudioGroup::sendDtmf(int event) |
| { |
| if (event < 0 || event > 15) { |
| return false; |
| } |
| |
| // DTMF is rarely used, so we try to make it as lightweight as possible. |
| // Using volatile might be dodgy, but using a pipe or pthread primitives |
| // or stop-set-restart threads seems too heavy. Will investigate later. |
| timespec ts; |
| ts.tv_sec = 0; |
| ts.tv_nsec = 100000000; |
| for (int i = 0; mDtmfEvent != -1 && i < 20; ++i) { |
| nanosleep(&ts, NULL); |
| } |
| if (mDtmfEvent != -1) { |
| return false; |
| } |
| mDtmfEvent = event; |
| nanosleep(&ts, NULL); |
| return true; |
| } |
| |
| bool AudioGroup::add(AudioStream *stream) |
| { |
| mNetworkThread->requestExitAndWait(); |
| |
| epoll_event event; |
| event.events = EPOLLIN; |
| event.data.ptr = stream; |
| if (epoll_ctl(mEventQueue, EPOLL_CTL_ADD, stream->mSocket, &event)) { |
| LOGE("epoll_ctl: %s", strerror(errno)); |
| return false; |
| } |
| |
| stream->mNext = mChain->mNext; |
| mChain->mNext = stream; |
| if (!mNetworkThread->start()) { |
| // Only take over the stream when succeeded. |
| mChain->mNext = stream->mNext; |
| return false; |
| } |
| |
| LOGD("stream[%d] joins group[%d]", stream->mSocket, mDeviceSocket); |
| return true; |
| } |
| |
| bool AudioGroup::remove(int socket) |
| { |
| mNetworkThread->requestExitAndWait(); |
| |
| for (AudioStream *stream = mChain; stream->mNext; stream = stream->mNext) { |
| AudioStream *target = stream->mNext; |
| if (target->mSocket == socket) { |
| if (epoll_ctl(mEventQueue, EPOLL_CTL_DEL, socket, NULL)) { |
| LOGE("epoll_ctl: %s", strerror(errno)); |
| return false; |
| } |
| stream->mNext = target->mNext; |
| LOGD("stream[%d] leaves group[%d]", socket, mDeviceSocket); |
| delete target; |
| break; |
| } |
| } |
| |
| // Do not start network thread if there is only one stream. |
| if (!mChain->mNext || !mNetworkThread->start()) { |
| return false; |
| } |
| return true; |
| } |
| |
| bool AudioGroup::NetworkThread::threadLoop() |
| { |
| AudioStream *chain = mGroup->mChain; |
| int tick = elapsedRealtime(); |
| int deadline = tick + 10; |
| int count = 0; |
| |
| for (AudioStream *stream = chain; stream; stream = stream->mNext) { |
| if (tick - stream->mTick >= 0) { |
| stream->encode(tick, chain); |
| } |
| if (deadline - stream->mTick > 0) { |
| deadline = stream->mTick; |
| } |
| ++count; |
| } |
| |
| int event = mGroup->mDtmfEvent; |
| if (event != -1) { |
| for (AudioStream *stream = chain; stream; stream = stream->mNext) { |
| stream->sendDtmf(event); |
| } |
| mGroup->mDtmfEvent = -1; |
| } |
| |
| deadline -= tick; |
| if (deadline < 1) { |
| deadline = 1; |
| } |
| |
| epoll_event events[count]; |
| count = epoll_wait(mGroup->mEventQueue, events, count, deadline); |
| if (count == -1) { |
| LOGE("epoll_wait: %s", strerror(errno)); |
| return false; |
| } |
| for (int i = 0; i < count; ++i) { |
| ((AudioStream *)events[i].data.ptr)->decode(tick); |
| } |
| |
| return true; |
| } |
| |
| bool AudioGroup::DeviceThread::threadLoop() |
| { |
| int mode = mGroup->mMode; |
| int sampleRate = mGroup->mSampleRate; |
| int sampleCount = mGroup->mSampleCount; |
| int deviceSocket = mGroup->mDeviceSocket; |
| |
| // Find out the frame count for AudioTrack and AudioRecord. |
| int output = 0; |
| int input = 0; |
| if (AudioTrack::getMinFrameCount(&output, AudioSystem::VOICE_CALL, |
| sampleRate) != NO_ERROR || output <= 0 || |
| AudioRecord::getMinFrameCount(&input, sampleRate, |
| AudioSystem::PCM_16_BIT, 1) != NO_ERROR || input <= 0) { |
| LOGE("cannot compute frame count"); |
| return false; |
| } |
| LOGD("reported frame count: output %d, input %d", output, input); |
| |
| if (output < sampleCount * 2) { |
| output = sampleCount * 2; |
| } |
| if (input < sampleCount * 2) { |
| input = sampleCount * 2; |
| } |
| LOGD("adjusted frame count: output %d, input %d", output, input); |
| |
| // Initialize AudioTrack and AudioRecord. |
| AudioTrack track; |
| AudioRecord record; |
| if (track.set(AudioSystem::VOICE_CALL, sampleRate, AudioSystem::PCM_16_BIT, |
| AudioSystem::CHANNEL_OUT_MONO, output) != NO_ERROR || record.set( |
| AUDIO_SOURCE_VOICE_COMMUNICATION, sampleRate, AudioSystem::PCM_16_BIT, |
| AudioSystem::CHANNEL_IN_MONO, input) != NO_ERROR) { |
| LOGE("cannot initialize audio device"); |
| return false; |
| } |
| LOGD("latency: output %d, input %d", track.latency(), record.latency()); |
| |
| // Initialize echo canceler. |
| EchoSuppressor echo(sampleCount, |
| (track.latency() + record.latency()) * sampleRate / 1000); |
| |
| // Give device socket a reasonable buffer size. |
| setsockopt(deviceSocket, SOL_SOCKET, SO_RCVBUF, &output, sizeof(output)); |
| setsockopt(deviceSocket, SOL_SOCKET, SO_SNDBUF, &output, sizeof(output)); |
| |
| // Drain device socket. |
| char c; |
| while (recv(deviceSocket, &c, 1, MSG_DONTWAIT) == 1); |
| |
| // Start AudioRecord before AudioTrack. This prevents AudioTrack from being |
| // disabled due to buffer underrun while waiting for AudioRecord. |
| if (mode != MUTED) { |
| record.start(); |
| int16_t one; |
| record.read(&one, sizeof(one)); |
| } |
| track.start(); |
| |
| while (!exitPending()) { |
| int16_t output[sampleCount]; |
| if (recv(deviceSocket, output, sizeof(output), 0) <= 0) { |
| memset(output, 0, sizeof(output)); |
| } |
| |
| int16_t input[sampleCount]; |
| int toWrite = sampleCount; |
| int toRead = (mode == MUTED) ? 0 : sampleCount; |
| int chances = 100; |
| |
| while (--chances > 0 && (toWrite > 0 || toRead > 0)) { |
| if (toWrite > 0) { |
| AudioTrack::Buffer buffer; |
| buffer.frameCount = toWrite; |
| |
| status_t status = track.obtainBuffer(&buffer, 1); |
| if (status == NO_ERROR) { |
| int offset = sampleCount - toWrite; |
| memcpy(buffer.i8, &output[offset], buffer.size); |
| toWrite -= buffer.frameCount; |
| track.releaseBuffer(&buffer); |
| } else if (status != TIMED_OUT && status != WOULD_BLOCK) { |
| LOGE("cannot write to AudioTrack"); |
| return true; |
| } |
| } |
| |
| if (toRead > 0) { |
| AudioRecord::Buffer buffer; |
| buffer.frameCount = toRead; |
| |
| status_t status = record.obtainBuffer(&buffer, 1); |
| if (status == NO_ERROR) { |
| int offset = sampleCount - toRead; |
| memcpy(&input[offset], buffer.i8, buffer.size); |
| toRead -= buffer.frameCount; |
| record.releaseBuffer(&buffer); |
| } else if (status != TIMED_OUT && status != WOULD_BLOCK) { |
| LOGE("cannot read from AudioRecord"); |
| return true; |
| } |
| } |
| } |
| |
| if (chances <= 0) { |
| LOGW("device loop timeout"); |
| while (recv(deviceSocket, &c, 1, MSG_DONTWAIT) == 1); |
| } |
| |
| if (mode != MUTED) { |
| if (mode == NORMAL) { |
| send(deviceSocket, input, sizeof(input), MSG_DONTWAIT); |
| } else { |
| echo.run(output, input); |
| send(deviceSocket, input, sizeof(input), MSG_DONTWAIT); |
| } |
| } |
| } |
| return false; |
| } |
| |
| //------------------------------------------------------------------------------ |
| |
| static jfieldID gNative; |
| static jfieldID gMode; |
| |
| void add(JNIEnv *env, jobject thiz, jint mode, |
| jint socket, jstring jRemoteAddress, jint remotePort, |
| jstring jCodecSpec, jint dtmfType) |
| { |
| AudioCodec *codec = NULL; |
| AudioStream *stream = NULL; |
| AudioGroup *group = NULL; |
| |
| // Sanity check. |
| sockaddr_storage remote; |
| if (parse(env, jRemoteAddress, remotePort, &remote) < 0) { |
| // Exception already thrown. |
| return; |
| } |
| if (!jCodecSpec) { |
| jniThrowNullPointerException(env, "codecSpec"); |
| return; |
| } |
| const char *codecSpec = env->GetStringUTFChars(jCodecSpec, NULL); |
| if (!codecSpec) { |
| // Exception already thrown. |
| return; |
| } |
| |
| // Create audio codec. |
| int codecType = -1; |
| char codecName[16]; |
| int sampleRate = -1; |
| sscanf(codecSpec, "%d %15[^/]%*c%d", &codecType, codecName, &sampleRate); |
| codec = newAudioCodec(codecName); |
| int sampleCount = (codec ? codec->set(sampleRate, codecSpec) : -1); |
| env->ReleaseStringUTFChars(jCodecSpec, codecSpec); |
| if (sampleCount <= 0) { |
| jniThrowException(env, "java/lang/IllegalStateException", |
| "cannot initialize audio codec"); |
| goto error; |
| } |
| |
| // Create audio stream. |
| stream = new AudioStream; |
| if (!stream->set(mode, socket, &remote, codec, sampleRate, sampleCount, |
| codecType, dtmfType)) { |
| jniThrowException(env, "java/lang/IllegalStateException", |
| "cannot initialize audio stream"); |
| goto error; |
| } |
| socket = -1; |
| codec = NULL; |
| |
| // Create audio group. |
| group = (AudioGroup *)env->GetIntField(thiz, gNative); |
| if (!group) { |
| int mode = env->GetIntField(thiz, gMode); |
| group = new AudioGroup; |
| if (!group->set(8000, 256) || !group->setMode(mode)) { |
| jniThrowException(env, "java/lang/IllegalStateException", |
| "cannot initialize audio group"); |
| goto error; |
| } |
| } |
| |
| // Add audio stream into audio group. |
| if (!group->add(stream)) { |
| jniThrowException(env, "java/lang/IllegalStateException", |
| "cannot add audio stream"); |
| goto error; |
| } |
| |
| // Succeed. |
| env->SetIntField(thiz, gNative, (int)group); |
| return; |
| |
| error: |
| delete group; |
| delete stream; |
| delete codec; |
| close(socket); |
| env->SetIntField(thiz, gNative, NULL); |
| } |
| |
| void remove(JNIEnv *env, jobject thiz, jint socket) |
| { |
| AudioGroup *group = (AudioGroup *)env->GetIntField(thiz, gNative); |
| if (group) { |
| if (socket == -1 || !group->remove(socket)) { |
| delete group; |
| env->SetIntField(thiz, gNative, NULL); |
| } |
| } |
| } |
| |
| void setMode(JNIEnv *env, jobject thiz, jint mode) |
| { |
| AudioGroup *group = (AudioGroup *)env->GetIntField(thiz, gNative); |
| if (group && !group->setMode(mode)) { |
| jniThrowException(env, "java/lang/IllegalArgumentException", NULL); |
| } |
| } |
| |
| void sendDtmf(JNIEnv *env, jobject thiz, jint event) |
| { |
| AudioGroup *group = (AudioGroup *)env->GetIntField(thiz, gNative); |
| if (group && !group->sendDtmf(event)) { |
| jniThrowException(env, "java/lang/IllegalArgumentException", NULL); |
| } |
| } |
| |
| JNINativeMethod gMethods[] = { |
| {"nativeAdd", "(IILjava/lang/String;ILjava/lang/String;I)V", (void *)add}, |
| {"nativeRemove", "(I)V", (void *)remove}, |
| {"nativeSetMode", "(I)V", (void *)setMode}, |
| {"nativeSendDtmf", "(I)V", (void *)sendDtmf}, |
| }; |
| |
| } // namespace |
| |
| int registerAudioGroup(JNIEnv *env) |
| { |
| gRandom = open("/dev/urandom", O_RDONLY); |
| if (gRandom == -1) { |
| LOGE("urandom: %s", strerror(errno)); |
| return -1; |
| } |
| |
| jclass clazz; |
| if ((clazz = env->FindClass("android/net/rtp/AudioGroup")) == NULL || |
| (gNative = env->GetFieldID(clazz, "mNative", "I")) == NULL || |
| (gMode = env->GetFieldID(clazz, "mMode", "I")) == NULL || |
| env->RegisterNatives(clazz, gMethods, NELEM(gMethods)) < 0) { |
| LOGE("JNI registration failed"); |
| return -1; |
| } |
| return 0; |
| } |