| /* |
| * Copyright (C) 2006 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.text; |
| |
| import static java.lang.annotation.RetentionPolicy.SOURCE; |
| |
| import android.annotation.FloatRange; |
| import android.annotation.IntDef; |
| import android.annotation.IntRange; |
| import android.annotation.NonNull; |
| import android.annotation.Nullable; |
| import android.annotation.PluralsRes; |
| import android.compat.annotation.UnsupportedAppUsage; |
| import android.content.Context; |
| import android.content.res.Resources; |
| import android.icu.lang.UCharacter; |
| import android.icu.text.CaseMap; |
| import android.icu.text.Edits; |
| import android.icu.util.ULocale; |
| import android.os.Parcel; |
| import android.os.Parcelable; |
| import android.sysprop.DisplayProperties; |
| import android.text.style.AbsoluteSizeSpan; |
| import android.text.style.AccessibilityClickableSpan; |
| import android.text.style.AccessibilityReplacementSpan; |
| import android.text.style.AccessibilityURLSpan; |
| import android.text.style.AlignmentSpan; |
| import android.text.style.BackgroundColorSpan; |
| import android.text.style.BulletSpan; |
| import android.text.style.CharacterStyle; |
| import android.text.style.EasyEditSpan; |
| import android.text.style.ForegroundColorSpan; |
| import android.text.style.LeadingMarginSpan; |
| import android.text.style.LineBackgroundSpan; |
| import android.text.style.LineHeightSpan; |
| import android.text.style.LocaleSpan; |
| import android.text.style.ParagraphStyle; |
| import android.text.style.QuoteSpan; |
| import android.text.style.RelativeSizeSpan; |
| import android.text.style.ReplacementSpan; |
| import android.text.style.ScaleXSpan; |
| import android.text.style.SpellCheckSpan; |
| import android.text.style.StrikethroughSpan; |
| import android.text.style.StyleSpan; |
| import android.text.style.SubscriptSpan; |
| import android.text.style.SuggestionRangeSpan; |
| import android.text.style.SuggestionSpan; |
| import android.text.style.SuperscriptSpan; |
| import android.text.style.TextAppearanceSpan; |
| import android.text.style.TtsSpan; |
| import android.text.style.TypefaceSpan; |
| import android.text.style.URLSpan; |
| import android.text.style.UnderlineSpan; |
| import android.text.style.UpdateAppearance; |
| import android.util.Log; |
| import android.util.Printer; |
| import android.view.View; |
| |
| import com.android.internal.R; |
| import com.android.internal.util.ArrayUtils; |
| import com.android.internal.util.Preconditions; |
| |
| import java.lang.annotation.Retention; |
| import java.lang.reflect.Array; |
| import java.util.BitSet; |
| import java.util.Iterator; |
| import java.util.List; |
| import java.util.Locale; |
| import java.util.regex.Pattern; |
| |
| public class TextUtils { |
| private static final String TAG = "TextUtils"; |
| |
| // Zero-width character used to fill ellipsized strings when codepoint length must be preserved. |
| /* package */ static final char ELLIPSIS_FILLER = '\uFEFF'; // ZERO WIDTH NO-BREAK SPACE |
| |
| // TODO: Based on CLDR data, these need to be localized for Dzongkha (dz) and perhaps |
| // Hong Kong Traditional Chinese (zh-Hant-HK), but that may need to depend on the actual word |
| // being ellipsized and not the locale. |
| private static final String ELLIPSIS_NORMAL = "\u2026"; // HORIZONTAL ELLIPSIS (…) |
| private static final String ELLIPSIS_TWO_DOTS = "\u2025"; // TWO DOT LEADER (‥) |
| |
| private static final int LINE_FEED_CODE_POINT = 10; |
| private static final int NBSP_CODE_POINT = 160; |
| |
| /** |
| * Flags for {@link #makeSafeForPresentation(String, int, float, int)} |
| * |
| * @hide |
| */ |
| @Retention(SOURCE) |
| @IntDef(flag = true, prefix = "CLEAN_STRING_FLAG_", |
| value = {SAFE_STRING_FLAG_TRIM, SAFE_STRING_FLAG_SINGLE_LINE, |
| SAFE_STRING_FLAG_FIRST_LINE}) |
| public @interface SafeStringFlags {} |
| |
| /** |
| * Remove {@link Character#isWhitespace(int) whitespace} and non-breaking spaces from the edges |
| * of the label. |
| * |
| * @see #makeSafeForPresentation(String, int, float, int) |
| */ |
| public static final int SAFE_STRING_FLAG_TRIM = 0x1; |
| |
| /** |
| * Force entire string into single line of text (no newlines). Cannot be set at the same time as |
| * {@link #SAFE_STRING_FLAG_FIRST_LINE}. |
| * |
| * @see #makeSafeForPresentation(String, int, float, int) |
| */ |
| public static final int SAFE_STRING_FLAG_SINGLE_LINE = 0x2; |
| |
| /** |
| * Return only first line of text (truncate at first newline). Cannot be set at the same time as |
| * {@link #SAFE_STRING_FLAG_SINGLE_LINE}. |
| * |
| * @see #makeSafeForPresentation(String, int, float, int) |
| */ |
| public static final int SAFE_STRING_FLAG_FIRST_LINE = 0x4; |
| |
| /** {@hide} */ |
| @NonNull |
| public static String getEllipsisString(@NonNull TextUtils.TruncateAt method) { |
| return (method == TextUtils.TruncateAt.END_SMALL) ? ELLIPSIS_TWO_DOTS : ELLIPSIS_NORMAL; |
| } |
| |
| |
| private TextUtils() { /* cannot be instantiated */ } |
| |
| public static void getChars(CharSequence s, int start, int end, |
| char[] dest, int destoff) { |
| Class<? extends CharSequence> c = s.getClass(); |
| |
| if (c == String.class) |
| ((String) s).getChars(start, end, dest, destoff); |
| else if (c == StringBuffer.class) |
| ((StringBuffer) s).getChars(start, end, dest, destoff); |
| else if (c == StringBuilder.class) |
| ((StringBuilder) s).getChars(start, end, dest, destoff); |
| else if (s instanceof GetChars) |
| ((GetChars) s).getChars(start, end, dest, destoff); |
| else { |
| for (int i = start; i < end; i++) |
| dest[destoff++] = s.charAt(i); |
| } |
| } |
| |
| public static int indexOf(CharSequence s, char ch) { |
| return indexOf(s, ch, 0); |
| } |
| |
| public static int indexOf(CharSequence s, char ch, int start) { |
| Class<? extends CharSequence> c = s.getClass(); |
| |
| if (c == String.class) |
| return ((String) s).indexOf(ch, start); |
| |
| return indexOf(s, ch, start, s.length()); |
| } |
| |
| public static int indexOf(CharSequence s, char ch, int start, int end) { |
| Class<? extends CharSequence> c = s.getClass(); |
| |
| if (s instanceof GetChars || c == StringBuffer.class || |
| c == StringBuilder.class || c == String.class) { |
| final int INDEX_INCREMENT = 500; |
| char[] temp = obtain(INDEX_INCREMENT); |
| |
| while (start < end) { |
| int segend = start + INDEX_INCREMENT; |
| if (segend > end) |
| segend = end; |
| |
| getChars(s, start, segend, temp, 0); |
| |
| int count = segend - start; |
| for (int i = 0; i < count; i++) { |
| if (temp[i] == ch) { |
| recycle(temp); |
| return i + start; |
| } |
| } |
| |
| start = segend; |
| } |
| |
| recycle(temp); |
| return -1; |
| } |
| |
| for (int i = start; i < end; i++) |
| if (s.charAt(i) == ch) |
| return i; |
| |
| return -1; |
| } |
| |
| public static int lastIndexOf(CharSequence s, char ch) { |
| return lastIndexOf(s, ch, s.length() - 1); |
| } |
| |
| public static int lastIndexOf(CharSequence s, char ch, int last) { |
| Class<? extends CharSequence> c = s.getClass(); |
| |
| if (c == String.class) |
| return ((String) s).lastIndexOf(ch, last); |
| |
| return lastIndexOf(s, ch, 0, last); |
| } |
| |
| public static int lastIndexOf(CharSequence s, char ch, |
| int start, int last) { |
| if (last < 0) |
| return -1; |
| if (last >= s.length()) |
| last = s.length() - 1; |
| |
| int end = last + 1; |
| |
| Class<? extends CharSequence> c = s.getClass(); |
| |
| if (s instanceof GetChars || c == StringBuffer.class || |
| c == StringBuilder.class || c == String.class) { |
| final int INDEX_INCREMENT = 500; |
| char[] temp = obtain(INDEX_INCREMENT); |
| |
| while (start < end) { |
| int segstart = end - INDEX_INCREMENT; |
| if (segstart < start) |
| segstart = start; |
| |
| getChars(s, segstart, end, temp, 0); |
| |
| int count = end - segstart; |
| for (int i = count - 1; i >= 0; i--) { |
| if (temp[i] == ch) { |
| recycle(temp); |
| return i + segstart; |
| } |
| } |
| |
| end = segstart; |
| } |
| |
| recycle(temp); |
| return -1; |
| } |
| |
| for (int i = end - 1; i >= start; i--) |
| if (s.charAt(i) == ch) |
| return i; |
| |
| return -1; |
| } |
| |
| public static int indexOf(CharSequence s, CharSequence needle) { |
| return indexOf(s, needle, 0, s.length()); |
| } |
| |
| public static int indexOf(CharSequence s, CharSequence needle, int start) { |
| return indexOf(s, needle, start, s.length()); |
| } |
| |
| public static int indexOf(CharSequence s, CharSequence needle, |
| int start, int end) { |
| int nlen = needle.length(); |
| if (nlen == 0) |
| return start; |
| |
| char c = needle.charAt(0); |
| |
| for (;;) { |
| start = indexOf(s, c, start); |
| if (start > end - nlen) { |
| break; |
| } |
| |
| if (start < 0) { |
| return -1; |
| } |
| |
| if (regionMatches(s, start, needle, 0, nlen)) { |
| return start; |
| } |
| |
| start++; |
| } |
| return -1; |
| } |
| |
| public static boolean regionMatches(CharSequence one, int toffset, |
| CharSequence two, int ooffset, |
| int len) { |
| int tempLen = 2 * len; |
| if (tempLen < len) { |
| // Integer overflow; len is unreasonably large |
| throw new IndexOutOfBoundsException(); |
| } |
| char[] temp = obtain(tempLen); |
| |
| getChars(one, toffset, toffset + len, temp, 0); |
| getChars(two, ooffset, ooffset + len, temp, len); |
| |
| boolean match = true; |
| for (int i = 0; i < len; i++) { |
| if (temp[i] != temp[i + len]) { |
| match = false; |
| break; |
| } |
| } |
| |
| recycle(temp); |
| return match; |
| } |
| |
| /** |
| * Create a new String object containing the given range of characters |
| * from the source string. This is different than simply calling |
| * {@link CharSequence#subSequence(int, int) CharSequence.subSequence} |
| * in that it does not preserve any style runs in the source sequence, |
| * allowing a more efficient implementation. |
| */ |
| public static String substring(CharSequence source, int start, int end) { |
| if (source instanceof String) |
| return ((String) source).substring(start, end); |
| if (source instanceof StringBuilder) |
| return ((StringBuilder) source).substring(start, end); |
| if (source instanceof StringBuffer) |
| return ((StringBuffer) source).substring(start, end); |
| |
| char[] temp = obtain(end - start); |
| getChars(source, start, end, temp, 0); |
| String ret = new String(temp, 0, end - start); |
| recycle(temp); |
| |
| return ret; |
| } |
| |
| /** |
| * Returns a string containing the tokens joined by delimiters. |
| * |
| * @param delimiter a CharSequence that will be inserted between the tokens. If null, the string |
| * "null" will be used as the delimiter. |
| * @param tokens an array objects to be joined. Strings will be formed from the objects by |
| * calling object.toString(). If tokens is null, a NullPointerException will be thrown. If |
| * tokens is an empty array, an empty string will be returned. |
| */ |
| public static String join(@NonNull CharSequence delimiter, @NonNull Object[] tokens) { |
| final int length = tokens.length; |
| if (length == 0) { |
| return ""; |
| } |
| final StringBuilder sb = new StringBuilder(); |
| sb.append(tokens[0]); |
| for (int i = 1; i < length; i++) { |
| sb.append(delimiter); |
| sb.append(tokens[i]); |
| } |
| return sb.toString(); |
| } |
| |
| /** |
| * Returns a string containing the tokens joined by delimiters. |
| * |
| * @param delimiter a CharSequence that will be inserted between the tokens. If null, the string |
| * "null" will be used as the delimiter. |
| * @param tokens an array objects to be joined. Strings will be formed from the objects by |
| * calling object.toString(). If tokens is null, a NullPointerException will be thrown. If |
| * tokens is empty, an empty string will be returned. |
| */ |
| public static String join(@NonNull CharSequence delimiter, @NonNull Iterable tokens) { |
| final Iterator<?> it = tokens.iterator(); |
| if (!it.hasNext()) { |
| return ""; |
| } |
| final StringBuilder sb = new StringBuilder(); |
| sb.append(it.next()); |
| while (it.hasNext()) { |
| sb.append(delimiter); |
| sb.append(it.next()); |
| } |
| return sb.toString(); |
| } |
| |
| /** |
| * |
| * This method yields the same result as {@code text.split(expression, -1)} except that if |
| * {@code text.isEmpty()} then this method returns an empty array whereas |
| * {@code "".split(expression, -1)} would have returned an array with a single {@code ""}. |
| * |
| * The {@code -1} means that trailing empty Strings are not removed from the result; for |
| * example split("a,", "," ) returns {"a", ""}. Note that whether a leading zero-width match |
| * can result in a leading {@code ""} depends on whether your app |
| * {@link android.content.pm.ApplicationInfo#targetSdkVersion targets an SDK version} |
| * {@code <= 28}; see {@link Pattern#split(CharSequence, int)}. |
| * |
| * @param text the string to split |
| * @param expression the regular expression to match |
| * @return an array of strings. The array will be empty if text is empty |
| * |
| * @throws NullPointerException if expression or text is null |
| */ |
| public static String[] split(String text, String expression) { |
| if (text.length() == 0) { |
| return EMPTY_STRING_ARRAY; |
| } else { |
| return text.split(expression, -1); |
| } |
| } |
| |
| /** |
| * Splits a string on a pattern. This method yields the same result as |
| * {@code pattern.split(text, -1)} except that if {@code text.isEmpty()} then this method |
| * returns an empty array whereas {@code pattern.split("", -1)} would have returned an array |
| * with a single {@code ""}. |
| * |
| * The {@code -1} means that trailing empty Strings are not removed from the result; |
| * Note that whether a leading zero-width match can result in a leading {@code ""} depends |
| * on whether your app {@link android.content.pm.ApplicationInfo#targetSdkVersion targets |
| * an SDK version} {@code <= 28}; see {@link Pattern#split(CharSequence, int)}. |
| * |
| * @param text the string to split |
| * @param pattern the regular expression to match |
| * @return an array of strings. The array will be empty if text is empty |
| * |
| * @throws NullPointerException if expression or text is null |
| */ |
| public static String[] split(String text, Pattern pattern) { |
| if (text.length() == 0) { |
| return EMPTY_STRING_ARRAY; |
| } else { |
| return pattern.split(text, -1); |
| } |
| } |
| |
| /** |
| * An interface for splitting strings according to rules that are opaque to the user of this |
| * interface. This also has less overhead than split, which uses regular expressions and |
| * allocates an array to hold the results. |
| * |
| * <p>The most efficient way to use this class is: |
| * |
| * <pre> |
| * // Once |
| * TextUtils.StringSplitter splitter = new TextUtils.SimpleStringSplitter(delimiter); |
| * |
| * // Once per string to split |
| * splitter.setString(string); |
| * for (String s : splitter) { |
| * ... |
| * } |
| * </pre> |
| */ |
| public interface StringSplitter extends Iterable<String> { |
| public void setString(String string); |
| } |
| |
| /** |
| * A simple string splitter. |
| * |
| * <p>If the final character in the string to split is the delimiter then no empty string will |
| * be returned for the empty string after that delimeter. That is, splitting <tt>"a,b,"</tt> on |
| * comma will return <tt>"a", "b"</tt>, not <tt>"a", "b", ""</tt>. |
| */ |
| public static class SimpleStringSplitter implements StringSplitter, Iterator<String> { |
| private String mString; |
| private char mDelimiter; |
| private int mPosition; |
| private int mLength; |
| |
| /** |
| * Initializes the splitter. setString may be called later. |
| * @param delimiter the delimeter on which to split |
| */ |
| public SimpleStringSplitter(char delimiter) { |
| mDelimiter = delimiter; |
| } |
| |
| /** |
| * Sets the string to split |
| * @param string the string to split |
| */ |
| public void setString(String string) { |
| mString = string; |
| mPosition = 0; |
| mLength = mString.length(); |
| } |
| |
| public Iterator<String> iterator() { |
| return this; |
| } |
| |
| public boolean hasNext() { |
| return mPosition < mLength; |
| } |
| |
| public String next() { |
| int end = mString.indexOf(mDelimiter, mPosition); |
| if (end == -1) { |
| end = mLength; |
| } |
| String nextString = mString.substring(mPosition, end); |
| mPosition = end + 1; // Skip the delimiter. |
| return nextString; |
| } |
| |
| public void remove() { |
| throw new UnsupportedOperationException(); |
| } |
| } |
| |
| public static CharSequence stringOrSpannedString(CharSequence source) { |
| if (source == null) |
| return null; |
| if (source instanceof SpannedString) |
| return source; |
| if (source instanceof Spanned) |
| return new SpannedString(source); |
| |
| return source.toString(); |
| } |
| |
| /** |
| * Returns true if the string is null or 0-length. |
| * @param str the string to be examined |
| * @return true if str is null or zero length |
| */ |
| public static boolean isEmpty(@Nullable CharSequence str) { |
| return str == null || str.length() == 0; |
| } |
| |
| /** {@hide} */ |
| public static String nullIfEmpty(@Nullable String str) { |
| return isEmpty(str) ? null : str; |
| } |
| |
| /** {@hide} */ |
| public static String emptyIfNull(@Nullable String str) { |
| return str == null ? "" : str; |
| } |
| |
| /** {@hide} */ |
| public static String firstNotEmpty(@Nullable String a, @NonNull String b) { |
| return !isEmpty(a) ? a : Preconditions.checkStringNotEmpty(b); |
| } |
| |
| /** {@hide} */ |
| public static int length(@Nullable String s) { |
| return s != null ? s.length() : 0; |
| } |
| |
| /** |
| * @return interned string if it's null. |
| * @hide |
| */ |
| public static String safeIntern(String s) { |
| return (s != null) ? s.intern() : null; |
| } |
| |
| /** |
| * Returns the length that the specified CharSequence would have if |
| * spaces and ASCII control characters were trimmed from the start and end, |
| * as by {@link String#trim}. |
| */ |
| public static int getTrimmedLength(CharSequence s) { |
| int len = s.length(); |
| |
| int start = 0; |
| while (start < len && s.charAt(start) <= ' ') { |
| start++; |
| } |
| |
| int end = len; |
| while (end > start && s.charAt(end - 1) <= ' ') { |
| end--; |
| } |
| |
| return end - start; |
| } |
| |
| /** |
| * Returns true if a and b are equal, including if they are both null. |
| * <p><i>Note: In platform versions 1.1 and earlier, this method only worked well if |
| * both the arguments were instances of String.</i></p> |
| * @param a first CharSequence to check |
| * @param b second CharSequence to check |
| * @return true if a and b are equal |
| */ |
| public static boolean equals(CharSequence a, CharSequence b) { |
| if (a == b) return true; |
| int length; |
| if (a != null && b != null && (length = a.length()) == b.length()) { |
| if (a instanceof String && b instanceof String) { |
| return a.equals(b); |
| } else { |
| for (int i = 0; i < length; i++) { |
| if (a.charAt(i) != b.charAt(i)) return false; |
| } |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /** |
| * This function only reverses individual {@code char}s and not their associated |
| * spans. It doesn't support surrogate pairs (that correspond to non-BMP code points), combining |
| * sequences or conjuncts either. |
| * @deprecated Do not use. |
| */ |
| @Deprecated |
| public static CharSequence getReverse(CharSequence source, int start, int end) { |
| return new Reverser(source, start, end); |
| } |
| |
| private static class Reverser |
| implements CharSequence, GetChars |
| { |
| public Reverser(CharSequence source, int start, int end) { |
| mSource = source; |
| mStart = start; |
| mEnd = end; |
| } |
| |
| public int length() { |
| return mEnd - mStart; |
| } |
| |
| public CharSequence subSequence(int start, int end) { |
| char[] buf = new char[end - start]; |
| |
| getChars(start, end, buf, 0); |
| return new String(buf); |
| } |
| |
| @Override |
| public String toString() { |
| return subSequence(0, length()).toString(); |
| } |
| |
| public char charAt(int off) { |
| return (char) UCharacter.getMirror(mSource.charAt(mEnd - 1 - off)); |
| } |
| |
| @SuppressWarnings("deprecation") |
| public void getChars(int start, int end, char[] dest, int destoff) { |
| TextUtils.getChars(mSource, start + mStart, end + mStart, |
| dest, destoff); |
| AndroidCharacter.mirror(dest, 0, end - start); |
| |
| int len = end - start; |
| int n = (end - start) / 2; |
| for (int i = 0; i < n; i++) { |
| char tmp = dest[destoff + i]; |
| |
| dest[destoff + i] = dest[destoff + len - i - 1]; |
| dest[destoff + len - i - 1] = tmp; |
| } |
| } |
| |
| private CharSequence mSource; |
| private int mStart; |
| private int mEnd; |
| } |
| |
| /** @hide */ |
| public static final int ALIGNMENT_SPAN = 1; |
| /** @hide */ |
| public static final int FIRST_SPAN = ALIGNMENT_SPAN; |
| /** @hide */ |
| public static final int FOREGROUND_COLOR_SPAN = 2; |
| /** @hide */ |
| public static final int RELATIVE_SIZE_SPAN = 3; |
| /** @hide */ |
| public static final int SCALE_X_SPAN = 4; |
| /** @hide */ |
| public static final int STRIKETHROUGH_SPAN = 5; |
| /** @hide */ |
| public static final int UNDERLINE_SPAN = 6; |
| /** @hide */ |
| public static final int STYLE_SPAN = 7; |
| /** @hide */ |
| public static final int BULLET_SPAN = 8; |
| /** @hide */ |
| public static final int QUOTE_SPAN = 9; |
| /** @hide */ |
| public static final int LEADING_MARGIN_SPAN = 10; |
| /** @hide */ |
| public static final int URL_SPAN = 11; |
| /** @hide */ |
| public static final int BACKGROUND_COLOR_SPAN = 12; |
| /** @hide */ |
| public static final int TYPEFACE_SPAN = 13; |
| /** @hide */ |
| public static final int SUPERSCRIPT_SPAN = 14; |
| /** @hide */ |
| public static final int SUBSCRIPT_SPAN = 15; |
| /** @hide */ |
| public static final int ABSOLUTE_SIZE_SPAN = 16; |
| /** @hide */ |
| public static final int TEXT_APPEARANCE_SPAN = 17; |
| /** @hide */ |
| public static final int ANNOTATION = 18; |
| /** @hide */ |
| public static final int SUGGESTION_SPAN = 19; |
| /** @hide */ |
| public static final int SPELL_CHECK_SPAN = 20; |
| /** @hide */ |
| public static final int SUGGESTION_RANGE_SPAN = 21; |
| /** @hide */ |
| public static final int EASY_EDIT_SPAN = 22; |
| /** @hide */ |
| public static final int LOCALE_SPAN = 23; |
| /** @hide */ |
| public static final int TTS_SPAN = 24; |
| /** @hide */ |
| public static final int ACCESSIBILITY_CLICKABLE_SPAN = 25; |
| /** @hide */ |
| public static final int ACCESSIBILITY_URL_SPAN = 26; |
| /** @hide */ |
| public static final int LINE_BACKGROUND_SPAN = 27; |
| /** @hide */ |
| public static final int LINE_HEIGHT_SPAN = 28; |
| /** @hide */ |
| public static final int ACCESSIBILITY_REPLACEMENT_SPAN = 29; |
| /** @hide */ |
| public static final int LAST_SPAN = LINE_HEIGHT_SPAN; |
| |
| /** |
| * Flatten a CharSequence and whatever styles can be copied across processes |
| * into the parcel. |
| */ |
| public static void writeToParcel(@Nullable CharSequence cs, @NonNull Parcel p, |
| int parcelableFlags) { |
| if (cs instanceof Spanned) { |
| p.writeInt(0); |
| p.writeString(cs.toString()); |
| |
| Spanned sp = (Spanned) cs; |
| Object[] os = sp.getSpans(0, cs.length(), Object.class); |
| |
| // note to people adding to this: check more specific types |
| // before more generic types. also notice that it uses |
| // "if" instead of "else if" where there are interfaces |
| // so one object can be several. |
| |
| for (int i = 0; i < os.length; i++) { |
| Object o = os[i]; |
| Object prop = os[i]; |
| |
| if (prop instanceof CharacterStyle) { |
| prop = ((CharacterStyle) prop).getUnderlying(); |
| } |
| |
| if (prop instanceof ParcelableSpan) { |
| final ParcelableSpan ps = (ParcelableSpan) prop; |
| final int spanTypeId = ps.getSpanTypeIdInternal(); |
| if (spanTypeId < FIRST_SPAN || spanTypeId > LAST_SPAN) { |
| Log.e(TAG, "External class \"" + ps.getClass().getSimpleName() |
| + "\" is attempting to use the frameworks-only ParcelableSpan" |
| + " interface"); |
| } else { |
| p.writeInt(spanTypeId); |
| ps.writeToParcelInternal(p, parcelableFlags); |
| writeWhere(p, sp, o); |
| } |
| } |
| } |
| |
| p.writeInt(0); |
| } else { |
| p.writeInt(1); |
| if (cs != null) { |
| p.writeString(cs.toString()); |
| } else { |
| p.writeString(null); |
| } |
| } |
| } |
| |
| private static void writeWhere(Parcel p, Spanned sp, Object o) { |
| p.writeInt(sp.getSpanStart(o)); |
| p.writeInt(sp.getSpanEnd(o)); |
| p.writeInt(sp.getSpanFlags(o)); |
| } |
| |
| public static final Parcelable.Creator<CharSequence> CHAR_SEQUENCE_CREATOR |
| = new Parcelable.Creator<CharSequence>() { |
| /** |
| * Read and return a new CharSequence, possibly with styles, |
| * from the parcel. |
| */ |
| public CharSequence createFromParcel(Parcel p) { |
| int kind = p.readInt(); |
| |
| String string = p.readString(); |
| if (string == null) { |
| return null; |
| } |
| |
| if (kind == 1) { |
| return string; |
| } |
| |
| SpannableString sp = new SpannableString(string); |
| |
| while (true) { |
| kind = p.readInt(); |
| |
| if (kind == 0) |
| break; |
| |
| switch (kind) { |
| case ALIGNMENT_SPAN: |
| readSpan(p, sp, new AlignmentSpan.Standard(p)); |
| break; |
| |
| case FOREGROUND_COLOR_SPAN: |
| readSpan(p, sp, new ForegroundColorSpan(p)); |
| break; |
| |
| case RELATIVE_SIZE_SPAN: |
| readSpan(p, sp, new RelativeSizeSpan(p)); |
| break; |
| |
| case SCALE_X_SPAN: |
| readSpan(p, sp, new ScaleXSpan(p)); |
| break; |
| |
| case STRIKETHROUGH_SPAN: |
| readSpan(p, sp, new StrikethroughSpan(p)); |
| break; |
| |
| case UNDERLINE_SPAN: |
| readSpan(p, sp, new UnderlineSpan(p)); |
| break; |
| |
| case STYLE_SPAN: |
| readSpan(p, sp, new StyleSpan(p)); |
| break; |
| |
| case BULLET_SPAN: |
| readSpan(p, sp, new BulletSpan(p)); |
| break; |
| |
| case QUOTE_SPAN: |
| readSpan(p, sp, new QuoteSpan(p)); |
| break; |
| |
| case LEADING_MARGIN_SPAN: |
| readSpan(p, sp, new LeadingMarginSpan.Standard(p)); |
| break; |
| |
| case URL_SPAN: |
| readSpan(p, sp, new URLSpan(p)); |
| break; |
| |
| case BACKGROUND_COLOR_SPAN: |
| readSpan(p, sp, new BackgroundColorSpan(p)); |
| break; |
| |
| case TYPEFACE_SPAN: |
| readSpan(p, sp, new TypefaceSpan(p)); |
| break; |
| |
| case SUPERSCRIPT_SPAN: |
| readSpan(p, sp, new SuperscriptSpan(p)); |
| break; |
| |
| case SUBSCRIPT_SPAN: |
| readSpan(p, sp, new SubscriptSpan(p)); |
| break; |
| |
| case ABSOLUTE_SIZE_SPAN: |
| readSpan(p, sp, new AbsoluteSizeSpan(p)); |
| break; |
| |
| case TEXT_APPEARANCE_SPAN: |
| readSpan(p, sp, new TextAppearanceSpan(p)); |
| break; |
| |
| case ANNOTATION: |
| readSpan(p, sp, new Annotation(p)); |
| break; |
| |
| case SUGGESTION_SPAN: |
| readSpan(p, sp, new SuggestionSpan(p)); |
| break; |
| |
| case SPELL_CHECK_SPAN: |
| readSpan(p, sp, new SpellCheckSpan(p)); |
| break; |
| |
| case SUGGESTION_RANGE_SPAN: |
| readSpan(p, sp, new SuggestionRangeSpan(p)); |
| break; |
| |
| case EASY_EDIT_SPAN: |
| readSpan(p, sp, new EasyEditSpan(p)); |
| break; |
| |
| case LOCALE_SPAN: |
| readSpan(p, sp, new LocaleSpan(p)); |
| break; |
| |
| case TTS_SPAN: |
| readSpan(p, sp, new TtsSpan(p)); |
| break; |
| |
| case ACCESSIBILITY_CLICKABLE_SPAN: |
| readSpan(p, sp, new AccessibilityClickableSpan(p)); |
| break; |
| |
| case ACCESSIBILITY_URL_SPAN: |
| readSpan(p, sp, new AccessibilityURLSpan(p)); |
| break; |
| |
| case LINE_BACKGROUND_SPAN: |
| readSpan(p, sp, new LineBackgroundSpan.Standard(p)); |
| break; |
| |
| case LINE_HEIGHT_SPAN: |
| readSpan(p, sp, new LineHeightSpan.Standard(p)); |
| break; |
| |
| case ACCESSIBILITY_REPLACEMENT_SPAN: |
| readSpan(p, sp, new AccessibilityReplacementSpan(p)); |
| break; |
| |
| default: |
| throw new RuntimeException("bogus span encoding " + kind); |
| } |
| } |
| |
| return sp; |
| } |
| |
| public CharSequence[] newArray(int size) |
| { |
| return new CharSequence[size]; |
| } |
| }; |
| |
| /** |
| * Debugging tool to print the spans in a CharSequence. The output will |
| * be printed one span per line. If the CharSequence is not a Spanned, |
| * then the entire string will be printed on a single line. |
| */ |
| public static void dumpSpans(CharSequence cs, Printer printer, String prefix) { |
| if (cs instanceof Spanned) { |
| Spanned sp = (Spanned) cs; |
| Object[] os = sp.getSpans(0, cs.length(), Object.class); |
| |
| for (int i = 0; i < os.length; i++) { |
| Object o = os[i]; |
| printer.println(prefix + cs.subSequence(sp.getSpanStart(o), |
| sp.getSpanEnd(o)) + ": " |
| + Integer.toHexString(System.identityHashCode(o)) |
| + " " + o.getClass().getCanonicalName() |
| + " (" + sp.getSpanStart(o) + "-" + sp.getSpanEnd(o) |
| + ") fl=#" + sp.getSpanFlags(o)); |
| } |
| } else { |
| printer.println(prefix + cs + ": (no spans)"); |
| } |
| } |
| |
| /** |
| * Return a new CharSequence in which each of the source strings is |
| * replaced by the corresponding element of the destinations. |
| */ |
| public static CharSequence replace(CharSequence template, |
| String[] sources, |
| CharSequence[] destinations) { |
| SpannableStringBuilder tb = new SpannableStringBuilder(template); |
| |
| for (int i = 0; i < sources.length; i++) { |
| int where = indexOf(tb, sources[i]); |
| |
| if (where >= 0) |
| tb.setSpan(sources[i], where, where + sources[i].length(), |
| Spanned.SPAN_EXCLUSIVE_EXCLUSIVE); |
| } |
| |
| for (int i = 0; i < sources.length; i++) { |
| int start = tb.getSpanStart(sources[i]); |
| int end = tb.getSpanEnd(sources[i]); |
| |
| if (start >= 0) { |
| tb.replace(start, end, destinations[i]); |
| } |
| } |
| |
| return tb; |
| } |
| |
| /** |
| * Replace instances of "^1", "^2", etc. in the |
| * <code>template</code> CharSequence with the corresponding |
| * <code>values</code>. "^^" is used to produce a single caret in |
| * the output. Only up to 9 replacement values are supported, |
| * "^10" will be produce the first replacement value followed by a |
| * '0'. |
| * |
| * @param template the input text containing "^1"-style |
| * placeholder values. This object is not modified; a copy is |
| * returned. |
| * |
| * @param values CharSequences substituted into the template. The |
| * first is substituted for "^1", the second for "^2", and so on. |
| * |
| * @return the new CharSequence produced by doing the replacement |
| * |
| * @throws IllegalArgumentException if the template requests a |
| * value that was not provided, or if more than 9 values are |
| * provided. |
| */ |
| public static CharSequence expandTemplate(CharSequence template, |
| CharSequence... values) { |
| if (values.length > 9) { |
| throw new IllegalArgumentException("max of 9 values are supported"); |
| } |
| |
| SpannableStringBuilder ssb = new SpannableStringBuilder(template); |
| |
| try { |
| int i = 0; |
| while (i < ssb.length()) { |
| if (ssb.charAt(i) == '^') { |
| char next = ssb.charAt(i+1); |
| if (next == '^') { |
| ssb.delete(i+1, i+2); |
| ++i; |
| continue; |
| } else if (Character.isDigit(next)) { |
| int which = Character.getNumericValue(next) - 1; |
| if (which < 0) { |
| throw new IllegalArgumentException( |
| "template requests value ^" + (which+1)); |
| } |
| if (which >= values.length) { |
| throw new IllegalArgumentException( |
| "template requests value ^" + (which+1) + |
| "; only " + values.length + " provided"); |
| } |
| ssb.replace(i, i+2, values[which]); |
| i += values[which].length(); |
| continue; |
| } |
| } |
| ++i; |
| } |
| } catch (IndexOutOfBoundsException ignore) { |
| // happens when ^ is the last character in the string. |
| } |
| return ssb; |
| } |
| |
| public static int getOffsetBefore(CharSequence text, int offset) { |
| if (offset == 0) |
| return 0; |
| if (offset == 1) |
| return 0; |
| |
| char c = text.charAt(offset - 1); |
| |
| if (c >= '\uDC00' && c <= '\uDFFF') { |
| char c1 = text.charAt(offset - 2); |
| |
| if (c1 >= '\uD800' && c1 <= '\uDBFF') |
| offset -= 2; |
| else |
| offset -= 1; |
| } else { |
| offset -= 1; |
| } |
| |
| if (text instanceof Spanned) { |
| ReplacementSpan[] spans = ((Spanned) text).getSpans(offset, offset, |
| ReplacementSpan.class); |
| |
| for (int i = 0; i < spans.length; i++) { |
| int start = ((Spanned) text).getSpanStart(spans[i]); |
| int end = ((Spanned) text).getSpanEnd(spans[i]); |
| |
| if (start < offset && end > offset) |
| offset = start; |
| } |
| } |
| |
| return offset; |
| } |
| |
| public static int getOffsetAfter(CharSequence text, int offset) { |
| int len = text.length(); |
| |
| if (offset == len) |
| return len; |
| if (offset == len - 1) |
| return len; |
| |
| char c = text.charAt(offset); |
| |
| if (c >= '\uD800' && c <= '\uDBFF') { |
| char c1 = text.charAt(offset + 1); |
| |
| if (c1 >= '\uDC00' && c1 <= '\uDFFF') |
| offset += 2; |
| else |
| offset += 1; |
| } else { |
| offset += 1; |
| } |
| |
| if (text instanceof Spanned) { |
| ReplacementSpan[] spans = ((Spanned) text).getSpans(offset, offset, |
| ReplacementSpan.class); |
| |
| for (int i = 0; i < spans.length; i++) { |
| int start = ((Spanned) text).getSpanStart(spans[i]); |
| int end = ((Spanned) text).getSpanEnd(spans[i]); |
| |
| if (start < offset && end > offset) |
| offset = end; |
| } |
| } |
| |
| return offset; |
| } |
| |
| private static void readSpan(Parcel p, Spannable sp, Object o) { |
| sp.setSpan(o, p.readInt(), p.readInt(), p.readInt()); |
| } |
| |
| /** |
| * Copies the spans from the region <code>start...end</code> in |
| * <code>source</code> to the region |
| * <code>destoff...destoff+end-start</code> in <code>dest</code>. |
| * Spans in <code>source</code> that begin before <code>start</code> |
| * or end after <code>end</code> but overlap this range are trimmed |
| * as if they began at <code>start</code> or ended at <code>end</code>. |
| * |
| * @throws IndexOutOfBoundsException if any of the copied spans |
| * are out of range in <code>dest</code>. |
| */ |
| public static void copySpansFrom(Spanned source, int start, int end, |
| Class kind, |
| Spannable dest, int destoff) { |
| if (kind == null) { |
| kind = Object.class; |
| } |
| |
| Object[] spans = source.getSpans(start, end, kind); |
| |
| for (int i = 0; i < spans.length; i++) { |
| int st = source.getSpanStart(spans[i]); |
| int en = source.getSpanEnd(spans[i]); |
| int fl = source.getSpanFlags(spans[i]); |
| |
| if (st < start) |
| st = start; |
| if (en > end) |
| en = end; |
| |
| dest.setSpan(spans[i], st - start + destoff, en - start + destoff, |
| fl); |
| } |
| } |
| |
| /** |
| * Transforms a CharSequences to uppercase, copying the sources spans and keeping them spans as |
| * much as possible close to their relative original places. In the case the the uppercase |
| * string is identical to the sources, the source itself is returned instead of being copied. |
| * |
| * If copySpans is set, source must be an instance of Spanned. |
| * |
| * {@hide} |
| */ |
| @NonNull |
| public static CharSequence toUpperCase(@Nullable Locale locale, @NonNull CharSequence source, |
| boolean copySpans) { |
| final Edits edits = new Edits(); |
| if (!copySpans) { // No spans. Just uppercase the characters. |
| final StringBuilder result = CaseMap.toUpper().apply( |
| locale, source, new StringBuilder(), edits); |
| return edits.hasChanges() ? result : source; |
| } |
| |
| final SpannableStringBuilder result = CaseMap.toUpper().apply( |
| locale, source, new SpannableStringBuilder(), edits); |
| if (!edits.hasChanges()) { |
| // No changes happened while capitalizing. We can return the source as it was. |
| return source; |
| } |
| |
| final Edits.Iterator iterator = edits.getFineIterator(); |
| final int sourceLength = source.length(); |
| final Spanned spanned = (Spanned) source; |
| final Object[] spans = spanned.getSpans(0, sourceLength, Object.class); |
| for (Object span : spans) { |
| final int sourceStart = spanned.getSpanStart(span); |
| final int sourceEnd = spanned.getSpanEnd(span); |
| final int flags = spanned.getSpanFlags(span); |
| // Make sure the indices are not at the end of the string, since in that case |
| // iterator.findSourceIndex() would fail. |
| final int destStart = sourceStart == sourceLength ? result.length() : |
| toUpperMapToDest(iterator, sourceStart); |
| final int destEnd = sourceEnd == sourceLength ? result.length() : |
| toUpperMapToDest(iterator, sourceEnd); |
| result.setSpan(span, destStart, destEnd, flags); |
| } |
| return result; |
| } |
| |
| // helper method for toUpperCase() |
| private static int toUpperMapToDest(Edits.Iterator iterator, int sourceIndex) { |
| // Guaranteed to succeed if sourceIndex < source.length(). |
| iterator.findSourceIndex(sourceIndex); |
| if (sourceIndex == iterator.sourceIndex()) { |
| return iterator.destinationIndex(); |
| } |
| // We handle the situation differently depending on if we are in the changed slice or an |
| // unchanged one: In an unchanged slice, we can find the exact location the span |
| // boundary was before and map there. |
| // |
| // But in a changed slice, we need to treat the whole destination slice as an atomic unit. |
| // We adjust the span boundary to the end of that slice to reduce of the chance of adjacent |
| // spans in the source overlapping in the result. (The choice for the end vs the beginning |
| // is somewhat arbitrary, but was taken because we except to see slightly more spans only |
| // affecting a base character compared to spans only affecting a combining character.) |
| if (iterator.hasChange()) { |
| return iterator.destinationIndex() + iterator.newLength(); |
| } else { |
| // Move the index 1:1 along with this unchanged piece of text. |
| return iterator.destinationIndex() + (sourceIndex - iterator.sourceIndex()); |
| } |
| } |
| |
| public enum TruncateAt { |
| START, |
| MIDDLE, |
| END, |
| MARQUEE, |
| /** |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| END_SMALL |
| } |
| |
| public interface EllipsizeCallback { |
| /** |
| * This method is called to report that the specified region of |
| * text was ellipsized away by a call to {@link #ellipsize}. |
| */ |
| public void ellipsized(int start, int end); |
| } |
| |
| /** |
| * Returns the original text if it fits in the specified width |
| * given the properties of the specified Paint, |
| * or, if it does not fit, a truncated |
| * copy with ellipsis character added at the specified edge or center. |
| */ |
| public static CharSequence ellipsize(CharSequence text, |
| TextPaint p, |
| float avail, TruncateAt where) { |
| return ellipsize(text, p, avail, where, false, null); |
| } |
| |
| /** |
| * Returns the original text if it fits in the specified width |
| * given the properties of the specified Paint, |
| * or, if it does not fit, a copy with ellipsis character added |
| * at the specified edge or center. |
| * If <code>preserveLength</code> is specified, the returned copy |
| * will be padded with zero-width spaces to preserve the original |
| * length and offsets instead of truncating. |
| * If <code>callback</code> is non-null, it will be called to |
| * report the start and end of the ellipsized range. TextDirection |
| * is determined by the first strong directional character. |
| */ |
| public static CharSequence ellipsize(CharSequence text, |
| TextPaint paint, |
| float avail, TruncateAt where, |
| boolean preserveLength, |
| @Nullable EllipsizeCallback callback) { |
| return ellipsize(text, paint, avail, where, preserveLength, callback, |
| TextDirectionHeuristics.FIRSTSTRONG_LTR, |
| getEllipsisString(where)); |
| } |
| |
| /** |
| * Returns the original text if it fits in the specified width |
| * given the properties of the specified Paint, |
| * or, if it does not fit, a copy with ellipsis character added |
| * at the specified edge or center. |
| * If <code>preserveLength</code> is specified, the returned copy |
| * will be padded with zero-width spaces to preserve the original |
| * length and offsets instead of truncating. |
| * If <code>callback</code> is non-null, it will be called to |
| * report the start and end of the ellipsized range. |
| * |
| * @hide |
| */ |
| public static CharSequence ellipsize(CharSequence text, |
| TextPaint paint, |
| float avail, TruncateAt where, |
| boolean preserveLength, |
| @Nullable EllipsizeCallback callback, |
| TextDirectionHeuristic textDir, String ellipsis) { |
| |
| int len = text.length(); |
| |
| MeasuredParagraph mt = null; |
| try { |
| mt = MeasuredParagraph.buildForMeasurement(paint, text, 0, text.length(), textDir, mt); |
| float width = mt.getWholeWidth(); |
| |
| if (width <= avail) { |
| if (callback != null) { |
| callback.ellipsized(0, 0); |
| } |
| |
| return text; |
| } |
| |
| // XXX assumes ellipsis string does not require shaping and |
| // is unaffected by style |
| float ellipsiswid = paint.measureText(ellipsis); |
| avail -= ellipsiswid; |
| |
| int left = 0; |
| int right = len; |
| if (avail < 0) { |
| // it all goes |
| } else if (where == TruncateAt.START) { |
| right = len - mt.breakText(len, false, avail); |
| } else if (where == TruncateAt.END || where == TruncateAt.END_SMALL) { |
| left = mt.breakText(len, true, avail); |
| } else { |
| right = len - mt.breakText(len, false, avail / 2); |
| avail -= mt.measure(right, len); |
| left = mt.breakText(right, true, avail); |
| } |
| |
| if (callback != null) { |
| callback.ellipsized(left, right); |
| } |
| |
| final char[] buf = mt.getChars(); |
| Spanned sp = text instanceof Spanned ? (Spanned) text : null; |
| |
| final int removed = right - left; |
| final int remaining = len - removed; |
| if (preserveLength) { |
| if (remaining > 0 && removed >= ellipsis.length()) { |
| ellipsis.getChars(0, ellipsis.length(), buf, left); |
| left += ellipsis.length(); |
| } // else skip the ellipsis |
| for (int i = left; i < right; i++) { |
| buf[i] = ELLIPSIS_FILLER; |
| } |
| String s = new String(buf, 0, len); |
| if (sp == null) { |
| return s; |
| } |
| SpannableString ss = new SpannableString(s); |
| copySpansFrom(sp, 0, len, Object.class, ss, 0); |
| return ss; |
| } |
| |
| if (remaining == 0) { |
| return ""; |
| } |
| |
| if (sp == null) { |
| StringBuilder sb = new StringBuilder(remaining + ellipsis.length()); |
| sb.append(buf, 0, left); |
| sb.append(ellipsis); |
| sb.append(buf, right, len - right); |
| return sb.toString(); |
| } |
| |
| SpannableStringBuilder ssb = new SpannableStringBuilder(); |
| ssb.append(text, 0, left); |
| ssb.append(ellipsis); |
| ssb.append(text, right, len); |
| return ssb; |
| } finally { |
| if (mt != null) { |
| mt.recycle(); |
| } |
| } |
| } |
| |
| /** |
| * Formats a list of CharSequences by repeatedly inserting the separator between them, |
| * but stopping when the resulting sequence is too wide for the specified width. |
| * |
| * This method actually tries to fit the maximum number of elements. So if {@code "A, 11 more" |
| * fits}, {@code "A, B, 10 more"} doesn't fit, but {@code "A, B, C, 9 more"} fits again (due to |
| * the glyphs for the digits being very wide, for example), it returns |
| * {@code "A, B, C, 9 more"}. Because of this, this method may be inefficient for very long |
| * lists. |
| * |
| * Note that the elements of the returned value, as well as the string for {@code moreId}, will |
| * be bidi-wrapped using {@link BidiFormatter#unicodeWrap} based on the locale of the input |
| * Context. If the input {@code Context} is null, the default BidiFormatter from |
| * {@link BidiFormatter#getInstance()} will be used. |
| * |
| * @param context the {@code Context} to get the {@code moreId} resource from. If {@code null}, |
| * an ellipsis (U+2026) would be used for {@code moreId}. |
| * @param elements the list to format |
| * @param separator a separator, such as {@code ", "} |
| * @param paint the Paint with which to measure the text |
| * @param avail the horizontal width available for the text (in pixels) |
| * @param moreId the resource ID for the pluralized string to insert at the end of sequence when |
| * some of the elements don't fit. |
| * |
| * @return the formatted CharSequence. If even the shortest sequence (e.g. {@code "A, 11 more"}) |
| * doesn't fit, it will return an empty string. |
| */ |
| |
| public static CharSequence listEllipsize(@Nullable Context context, |
| @Nullable List<CharSequence> elements, @NonNull String separator, |
| @NonNull TextPaint paint, @FloatRange(from=0.0,fromInclusive=false) float avail, |
| @PluralsRes int moreId) { |
| if (elements == null) { |
| return ""; |
| } |
| final int totalLen = elements.size(); |
| if (totalLen == 0) { |
| return ""; |
| } |
| |
| final Resources res; |
| final BidiFormatter bidiFormatter; |
| if (context == null) { |
| res = null; |
| bidiFormatter = BidiFormatter.getInstance(); |
| } else { |
| res = context.getResources(); |
| bidiFormatter = BidiFormatter.getInstance(res.getConfiguration().getLocales().get(0)); |
| } |
| |
| final SpannableStringBuilder output = new SpannableStringBuilder(); |
| final int[] endIndexes = new int[totalLen]; |
| for (int i = 0; i < totalLen; i++) { |
| output.append(bidiFormatter.unicodeWrap(elements.get(i))); |
| if (i != totalLen - 1) { // Insert a separator, except at the very end. |
| output.append(separator); |
| } |
| endIndexes[i] = output.length(); |
| } |
| |
| for (int i = totalLen - 1; i >= 0; i--) { |
| // Delete the tail of the string, cutting back to one less element. |
| output.delete(endIndexes[i], output.length()); |
| |
| final int remainingElements = totalLen - i - 1; |
| if (remainingElements > 0) { |
| CharSequence morePiece = (res == null) ? |
| ELLIPSIS_NORMAL : |
| res.getQuantityString(moreId, remainingElements, remainingElements); |
| morePiece = bidiFormatter.unicodeWrap(morePiece); |
| output.append(morePiece); |
| } |
| |
| final float width = paint.measureText(output, 0, output.length()); |
| if (width <= avail) { // The string fits. |
| return output; |
| } |
| } |
| return ""; // Nothing fits. |
| } |
| |
| /** |
| * Converts a CharSequence of the comma-separated form "Andy, Bob, |
| * Charles, David" that is too wide to fit into the specified width |
| * into one like "Andy, Bob, 2 more". |
| * |
| * @param text the text to truncate |
| * @param p the Paint with which to measure the text |
| * @param avail the horizontal width available for the text (in pixels) |
| * @param oneMore the string for "1 more" in the current locale |
| * @param more the string for "%d more" in the current locale |
| * |
| * @deprecated Do not use. This is not internationalized, and has known issues |
| * with right-to-left text, languages that have more than one plural form, languages |
| * that use a different character as a comma-like separator, etc. |
| * Use {@link #listEllipsize} instead. |
| */ |
| @Deprecated |
| public static CharSequence commaEllipsize(CharSequence text, |
| TextPaint p, float avail, |
| String oneMore, |
| String more) { |
| return commaEllipsize(text, p, avail, oneMore, more, |
| TextDirectionHeuristics.FIRSTSTRONG_LTR); |
| } |
| |
| /** |
| * @hide |
| */ |
| @Deprecated |
| public static CharSequence commaEllipsize(CharSequence text, TextPaint p, |
| float avail, String oneMore, String more, TextDirectionHeuristic textDir) { |
| |
| MeasuredParagraph mt = null; |
| MeasuredParagraph tempMt = null; |
| try { |
| int len = text.length(); |
| mt = MeasuredParagraph.buildForMeasurement(p, text, 0, len, textDir, mt); |
| final float width = mt.getWholeWidth(); |
| if (width <= avail) { |
| return text; |
| } |
| |
| char[] buf = mt.getChars(); |
| |
| int commaCount = 0; |
| for (int i = 0; i < len; i++) { |
| if (buf[i] == ',') { |
| commaCount++; |
| } |
| } |
| |
| int remaining = commaCount + 1; |
| |
| int ok = 0; |
| String okFormat = ""; |
| |
| int w = 0; |
| int count = 0; |
| float[] widths = mt.getWidths().getRawArray(); |
| |
| for (int i = 0; i < len; i++) { |
| w += widths[i]; |
| |
| if (buf[i] == ',') { |
| count++; |
| |
| String format; |
| // XXX should not insert spaces, should be part of string |
| // XXX should use plural rules and not assume English plurals |
| if (--remaining == 1) { |
| format = " " + oneMore; |
| } else { |
| format = " " + String.format(more, remaining); |
| } |
| |
| // XXX this is probably ok, but need to look at it more |
| tempMt = MeasuredParagraph.buildForMeasurement( |
| p, format, 0, format.length(), textDir, tempMt); |
| float moreWid = tempMt.getWholeWidth(); |
| |
| if (w + moreWid <= avail) { |
| ok = i + 1; |
| okFormat = format; |
| } |
| } |
| } |
| |
| SpannableStringBuilder out = new SpannableStringBuilder(okFormat); |
| out.insert(0, text, 0, ok); |
| return out; |
| } finally { |
| if (mt != null) { |
| mt.recycle(); |
| } |
| if (tempMt != null) { |
| tempMt.recycle(); |
| } |
| } |
| } |
| |
| // Returns true if the character's presence could affect RTL layout. |
| // |
| // In order to be fast, the code is intentionally rough and quite conservative in its |
| // considering inclusion of any non-BMP or surrogate characters or anything in the bidi |
| // blocks or any bidi formatting characters with a potential to affect RTL layout. |
| /* package */ |
| static boolean couldAffectRtl(char c) { |
| return (0x0590 <= c && c <= 0x08FF) || // RTL scripts |
| c == 0x200E || // Bidi format character |
| c == 0x200F || // Bidi format character |
| (0x202A <= c && c <= 0x202E) || // Bidi format characters |
| (0x2066 <= c && c <= 0x2069) || // Bidi format characters |
| (0xD800 <= c && c <= 0xDFFF) || // Surrogate pairs |
| (0xFB1D <= c && c <= 0xFDFF) || // Hebrew and Arabic presentation forms |
| (0xFE70 <= c && c <= 0xFEFE); // Arabic presentation forms |
| } |
| |
| // Returns true if there is no character present that may potentially affect RTL layout. |
| // Since this calls couldAffectRtl() above, it's also quite conservative, in the way that |
| // it may return 'false' (needs bidi) although careful consideration may tell us it should |
| // return 'true' (does not need bidi). |
| /* package */ |
| static boolean doesNotNeedBidi(char[] text, int start, int len) { |
| final int end = start + len; |
| for (int i = start; i < end; i++) { |
| if (couldAffectRtl(text[i])) { |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| /* package */ static char[] obtain(int len) { |
| char[] buf; |
| |
| synchronized (sLock) { |
| buf = sTemp; |
| sTemp = null; |
| } |
| |
| if (buf == null || buf.length < len) |
| buf = ArrayUtils.newUnpaddedCharArray(len); |
| |
| return buf; |
| } |
| |
| /* package */ static void recycle(char[] temp) { |
| if (temp.length > 1000) |
| return; |
| |
| synchronized (sLock) { |
| sTemp = temp; |
| } |
| } |
| |
| /** |
| * Html-encode the string. |
| * @param s the string to be encoded |
| * @return the encoded string |
| */ |
| public static String htmlEncode(String s) { |
| StringBuilder sb = new StringBuilder(); |
| char c; |
| for (int i = 0; i < s.length(); i++) { |
| c = s.charAt(i); |
| switch (c) { |
| case '<': |
| sb.append("<"); //$NON-NLS-1$ |
| break; |
| case '>': |
| sb.append(">"); //$NON-NLS-1$ |
| break; |
| case '&': |
| sb.append("&"); //$NON-NLS-1$ |
| break; |
| case '\'': |
| //http://www.w3.org/TR/xhtml1 |
| // The named character reference ' (the apostrophe, U+0027) was introduced in |
| // XML 1.0 but does not appear in HTML. Authors should therefore use ' instead |
| // of ' to work as expected in HTML 4 user agents. |
| sb.append("'"); //$NON-NLS-1$ |
| break; |
| case '"': |
| sb.append("""); //$NON-NLS-1$ |
| break; |
| default: |
| sb.append(c); |
| } |
| } |
| return sb.toString(); |
| } |
| |
| /** |
| * Returns a CharSequence concatenating the specified CharSequences, |
| * retaining their spans if any. |
| * |
| * If there are no parameters, an empty string will be returned. |
| * |
| * If the number of parameters is exactly one, that parameter is returned as output, even if it |
| * is null. |
| * |
| * If the number of parameters is at least two, any null CharSequence among the parameters is |
| * treated as if it was the string <code>"null"</code>. |
| * |
| * If there are paragraph spans in the source CharSequences that satisfy paragraph boundary |
| * requirements in the sources but would no longer satisfy them in the concatenated |
| * CharSequence, they may get extended in the resulting CharSequence or not retained. |
| */ |
| public static CharSequence concat(CharSequence... text) { |
| if (text.length == 0) { |
| return ""; |
| } |
| |
| if (text.length == 1) { |
| return text[0]; |
| } |
| |
| boolean spanned = false; |
| for (CharSequence piece : text) { |
| if (piece instanceof Spanned) { |
| spanned = true; |
| break; |
| } |
| } |
| |
| if (spanned) { |
| final SpannableStringBuilder ssb = new SpannableStringBuilder(); |
| for (CharSequence piece : text) { |
| // If a piece is null, we append the string "null" for compatibility with the |
| // behavior of StringBuilder and the behavior of the concat() method in earlier |
| // versions of Android. |
| ssb.append(piece == null ? "null" : piece); |
| } |
| return new SpannedString(ssb); |
| } else { |
| final StringBuilder sb = new StringBuilder(); |
| for (CharSequence piece : text) { |
| sb.append(piece); |
| } |
| return sb.toString(); |
| } |
| } |
| |
| /** |
| * Returns whether the given CharSequence contains any printable characters. |
| */ |
| public static boolean isGraphic(CharSequence str) { |
| final int len = str.length(); |
| for (int cp, i=0; i<len; i+=Character.charCount(cp)) { |
| cp = Character.codePointAt(str, i); |
| int gc = Character.getType(cp); |
| if (gc != Character.CONTROL |
| && gc != Character.FORMAT |
| && gc != Character.SURROGATE |
| && gc != Character.UNASSIGNED |
| && gc != Character.LINE_SEPARATOR |
| && gc != Character.PARAGRAPH_SEPARATOR |
| && gc != Character.SPACE_SEPARATOR) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /** |
| * Returns whether this character is a printable character. |
| * |
| * This does not support non-BMP characters and should not be used. |
| * |
| * @deprecated Use {@link #isGraphic(CharSequence)} instead. |
| */ |
| @Deprecated |
| public static boolean isGraphic(char c) { |
| int gc = Character.getType(c); |
| return gc != Character.CONTROL |
| && gc != Character.FORMAT |
| && gc != Character.SURROGATE |
| && gc != Character.UNASSIGNED |
| && gc != Character.LINE_SEPARATOR |
| && gc != Character.PARAGRAPH_SEPARATOR |
| && gc != Character.SPACE_SEPARATOR; |
| } |
| |
| /** |
| * Returns whether the given CharSequence contains only digits. |
| */ |
| public static boolean isDigitsOnly(CharSequence str) { |
| final int len = str.length(); |
| for (int cp, i = 0; i < len; i += Character.charCount(cp)) { |
| cp = Character.codePointAt(str, i); |
| if (!Character.isDigit(cp)) { |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| /** |
| * @hide |
| */ |
| public static boolean isPrintableAscii(final char c) { |
| final int asciiFirst = 0x20; |
| final int asciiLast = 0x7E; // included |
| return (asciiFirst <= c && c <= asciiLast) || c == '\r' || c == '\n'; |
| } |
| |
| /** |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| public static boolean isPrintableAsciiOnly(final CharSequence str) { |
| final int len = str.length(); |
| for (int i = 0; i < len; i++) { |
| if (!isPrintableAscii(str.charAt(i))) { |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| /** |
| * Capitalization mode for {@link #getCapsMode}: capitalize all |
| * characters. This value is explicitly defined to be the same as |
| * {@link InputType#TYPE_TEXT_FLAG_CAP_CHARACTERS}. |
| */ |
| public static final int CAP_MODE_CHARACTERS |
| = InputType.TYPE_TEXT_FLAG_CAP_CHARACTERS; |
| |
| /** |
| * Capitalization mode for {@link #getCapsMode}: capitalize the first |
| * character of all words. This value is explicitly defined to be the same as |
| * {@link InputType#TYPE_TEXT_FLAG_CAP_WORDS}. |
| */ |
| public static final int CAP_MODE_WORDS |
| = InputType.TYPE_TEXT_FLAG_CAP_WORDS; |
| |
| /** |
| * Capitalization mode for {@link #getCapsMode}: capitalize the first |
| * character of each sentence. This value is explicitly defined to be the same as |
| * {@link InputType#TYPE_TEXT_FLAG_CAP_SENTENCES}. |
| */ |
| public static final int CAP_MODE_SENTENCES |
| = InputType.TYPE_TEXT_FLAG_CAP_SENTENCES; |
| |
| /** |
| * Determine what caps mode should be in effect at the current offset in |
| * the text. Only the mode bits set in <var>reqModes</var> will be |
| * checked. Note that the caps mode flags here are explicitly defined |
| * to match those in {@link InputType}. |
| * |
| * @param cs The text that should be checked for caps modes. |
| * @param off Location in the text at which to check. |
| * @param reqModes The modes to be checked: may be any combination of |
| * {@link #CAP_MODE_CHARACTERS}, {@link #CAP_MODE_WORDS}, and |
| * {@link #CAP_MODE_SENTENCES}. |
| * |
| * @return Returns the actual capitalization modes that can be in effect |
| * at the current position, which is any combination of |
| * {@link #CAP_MODE_CHARACTERS}, {@link #CAP_MODE_WORDS}, and |
| * {@link #CAP_MODE_SENTENCES}. |
| */ |
| public static int getCapsMode(CharSequence cs, int off, int reqModes) { |
| if (off < 0) { |
| return 0; |
| } |
| |
| int i; |
| char c; |
| int mode = 0; |
| |
| if ((reqModes&CAP_MODE_CHARACTERS) != 0) { |
| mode |= CAP_MODE_CHARACTERS; |
| } |
| if ((reqModes&(CAP_MODE_WORDS|CAP_MODE_SENTENCES)) == 0) { |
| return mode; |
| } |
| |
| // Back over allowed opening punctuation. |
| |
| for (i = off; i > 0; i--) { |
| c = cs.charAt(i - 1); |
| |
| if (c != '"' && c != '\'' && |
| Character.getType(c) != Character.START_PUNCTUATION) { |
| break; |
| } |
| } |
| |
| // Start of paragraph, with optional whitespace. |
| |
| int j = i; |
| while (j > 0 && ((c = cs.charAt(j - 1)) == ' ' || c == '\t')) { |
| j--; |
| } |
| if (j == 0 || cs.charAt(j - 1) == '\n') { |
| return mode | CAP_MODE_WORDS; |
| } |
| |
| // Or start of word if we are that style. |
| |
| if ((reqModes&CAP_MODE_SENTENCES) == 0) { |
| if (i != j) mode |= CAP_MODE_WORDS; |
| return mode; |
| } |
| |
| // There must be a space if not the start of paragraph. |
| |
| if (i == j) { |
| return mode; |
| } |
| |
| // Back over allowed closing punctuation. |
| |
| for (; j > 0; j--) { |
| c = cs.charAt(j - 1); |
| |
| if (c != '"' && c != '\'' && |
| Character.getType(c) != Character.END_PUNCTUATION) { |
| break; |
| } |
| } |
| |
| if (j > 0) { |
| c = cs.charAt(j - 1); |
| |
| if (c == '.' || c == '?' || c == '!') { |
| // Do not capitalize if the word ends with a period but |
| // also contains a period, in which case it is an abbreviation. |
| |
| if (c == '.') { |
| for (int k = j - 2; k >= 0; k--) { |
| c = cs.charAt(k); |
| |
| if (c == '.') { |
| return mode; |
| } |
| |
| if (!Character.isLetter(c)) { |
| break; |
| } |
| } |
| } |
| |
| return mode | CAP_MODE_SENTENCES; |
| } |
| } |
| |
| return mode; |
| } |
| |
| /** |
| * Does a comma-delimited list 'delimitedString' contain a certain item? |
| * (without allocating memory) |
| * |
| * @hide |
| */ |
| public static boolean delimitedStringContains( |
| String delimitedString, char delimiter, String item) { |
| if (isEmpty(delimitedString) || isEmpty(item)) { |
| return false; |
| } |
| int pos = -1; |
| int length = delimitedString.length(); |
| while ((pos = delimitedString.indexOf(item, pos + 1)) != -1) { |
| if (pos > 0 && delimitedString.charAt(pos - 1) != delimiter) { |
| continue; |
| } |
| int expectedDelimiterPos = pos + item.length(); |
| if (expectedDelimiterPos == length) { |
| // Match at end of string. |
| return true; |
| } |
| if (delimitedString.charAt(expectedDelimiterPos) == delimiter) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /** |
| * Removes empty spans from the <code>spans</code> array. |
| * |
| * When parsing a Spanned using {@link Spanned#nextSpanTransition(int, int, Class)}, empty spans |
| * will (correctly) create span transitions, and calling getSpans on a slice of text bounded by |
| * one of these transitions will (correctly) include the empty overlapping span. |
| * |
| * However, these empty spans should not be taken into account when layouting or rendering the |
| * string and this method provides a way to filter getSpans' results accordingly. |
| * |
| * @param spans A list of spans retrieved using {@link Spanned#getSpans(int, int, Class)} from |
| * the <code>spanned</code> |
| * @param spanned The Spanned from which spans were extracted |
| * @return A subset of spans where empty spans ({@link Spanned#getSpanStart(Object)} == |
| * {@link Spanned#getSpanEnd(Object)} have been removed. The initial order is preserved |
| * @hide |
| */ |
| @SuppressWarnings("unchecked") |
| public static <T> T[] removeEmptySpans(T[] spans, Spanned spanned, Class<T> klass) { |
| T[] copy = null; |
| int count = 0; |
| |
| for (int i = 0; i < spans.length; i++) { |
| final T span = spans[i]; |
| final int start = spanned.getSpanStart(span); |
| final int end = spanned.getSpanEnd(span); |
| |
| if (start == end) { |
| if (copy == null) { |
| copy = (T[]) Array.newInstance(klass, spans.length - 1); |
| System.arraycopy(spans, 0, copy, 0, i); |
| count = i; |
| } |
| } else { |
| if (copy != null) { |
| copy[count] = span; |
| count++; |
| } |
| } |
| } |
| |
| if (copy != null) { |
| T[] result = (T[]) Array.newInstance(klass, count); |
| System.arraycopy(copy, 0, result, 0, count); |
| return result; |
| } else { |
| return spans; |
| } |
| } |
| |
| /** |
| * Pack 2 int values into a long, useful as a return value for a range |
| * @see #unpackRangeStartFromLong(long) |
| * @see #unpackRangeEndFromLong(long) |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| public static long packRangeInLong(int start, int end) { |
| return (((long) start) << 32) | end; |
| } |
| |
| /** |
| * Get the start value from a range packed in a long by {@link #packRangeInLong(int, int)} |
| * @see #unpackRangeEndFromLong(long) |
| * @see #packRangeInLong(int, int) |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| public static int unpackRangeStartFromLong(long range) { |
| return (int) (range >>> 32); |
| } |
| |
| /** |
| * Get the end value from a range packed in a long by {@link #packRangeInLong(int, int)} |
| * @see #unpackRangeStartFromLong(long) |
| * @see #packRangeInLong(int, int) |
| * @hide |
| */ |
| @UnsupportedAppUsage |
| public static int unpackRangeEndFromLong(long range) { |
| return (int) (range & 0x00000000FFFFFFFFL); |
| } |
| |
| /** |
| * Return the layout direction for a given Locale |
| * |
| * @param locale the Locale for which we want the layout direction. Can be null. |
| * @return the layout direction. This may be one of: |
| * {@link android.view.View#LAYOUT_DIRECTION_LTR} or |
| * {@link android.view.View#LAYOUT_DIRECTION_RTL}. |
| * |
| * Be careful: this code will need to be updated when vertical scripts will be supported |
| */ |
| public static int getLayoutDirectionFromLocale(Locale locale) { |
| return ((locale != null && !locale.equals(Locale.ROOT) |
| && ULocale.forLocale(locale).isRightToLeft()) |
| // If forcing into RTL layout mode, return RTL as default |
| || DisplayProperties.debug_force_rtl().orElse(false)) |
| ? View.LAYOUT_DIRECTION_RTL |
| : View.LAYOUT_DIRECTION_LTR; |
| } |
| |
| /** |
| * Return localized string representing the given number of selected items. |
| * |
| * @hide |
| */ |
| public static CharSequence formatSelectedCount(int count) { |
| return Resources.getSystem().getQuantityString(R.plurals.selected_count, count, count); |
| } |
| |
| /** |
| * Returns whether or not the specified spanned text has a style span. |
| * @hide |
| */ |
| public static boolean hasStyleSpan(@NonNull Spanned spanned) { |
| Preconditions.checkArgument(spanned != null); |
| final Class<?>[] styleClasses = { |
| CharacterStyle.class, ParagraphStyle.class, UpdateAppearance.class}; |
| for (Class<?> clazz : styleClasses) { |
| if (spanned.nextSpanTransition(-1, spanned.length(), clazz) < spanned.length()) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /** |
| * If the {@code charSequence} is instance of {@link Spanned}, creates a new copy and |
| * {@link NoCopySpan}'s are removed from the copy. Otherwise the given {@code charSequence} is |
| * returned as it is. |
| * |
| * @hide |
| */ |
| @Nullable |
| public static CharSequence trimNoCopySpans(@Nullable CharSequence charSequence) { |
| if (charSequence != null && charSequence instanceof Spanned) { |
| // SpannableStringBuilder copy constructor trims NoCopySpans. |
| return new SpannableStringBuilder(charSequence); |
| } |
| return charSequence; |
| } |
| |
| /** |
| * Prepends {@code start} and appends {@code end} to a given {@link StringBuilder} |
| * |
| * @hide |
| */ |
| public static void wrap(StringBuilder builder, String start, String end) { |
| builder.insert(0, start); |
| builder.append(end); |
| } |
| |
| /** |
| * Intent size limitations prevent sending over a megabyte of data. Limit |
| * text length to 100K characters - 200KB. |
| */ |
| private static final int PARCEL_SAFE_TEXT_LENGTH = 100000; |
| |
| /** |
| * Trims the text to {@link #PARCEL_SAFE_TEXT_LENGTH} length. Returns the string as it is if |
| * the length() is smaller than {@link #PARCEL_SAFE_TEXT_LENGTH}. Used for text that is parceled |
| * into a {@link Parcelable}. |
| * |
| * @hide |
| */ |
| @Nullable |
| public static <T extends CharSequence> T trimToParcelableSize(@Nullable T text) { |
| return trimToSize(text, PARCEL_SAFE_TEXT_LENGTH); |
| } |
| |
| /** |
| * Trims the text to {@code size} length. Returns the string as it is if the length() is |
| * smaller than {@code size}. If chars at {@code size-1} and {@code size} is a surrogate |
| * pair, returns a CharSequence of length {@code size-1}. |
| * |
| * @param size length of the result, should be greater than 0 |
| * |
| * @hide |
| */ |
| @Nullable |
| public static <T extends CharSequence> T trimToSize(@Nullable T text, |
| @IntRange(from = 1) int size) { |
| Preconditions.checkArgument(size > 0); |
| if (TextUtils.isEmpty(text) || text.length() <= size) return text; |
| if (Character.isHighSurrogate(text.charAt(size - 1)) |
| && Character.isLowSurrogate(text.charAt(size))) { |
| size = size - 1; |
| } |
| return (T) text.subSequence(0, size); |
| } |
| |
| /** |
| * Trims the {@code text} to the first {@code size} characters and adds an ellipsis if the |
| * resulting string is shorter than the input. This will result in an output string which is |
| * longer than {@code size} for most inputs. |
| * |
| * @param size length of the result, should be greater than 0 |
| * |
| * @hide |
| */ |
| @Nullable |
| public static <T extends CharSequence> T trimToLengthWithEllipsis(@Nullable T text, |
| @IntRange(from = 1) int size) { |
| T trimmed = trimToSize(text, size); |
| if (trimmed.length() < text.length()) { |
| trimmed = (T) (trimmed.toString() + "..."); |
| } |
| return trimmed; |
| } |
| |
| private static boolean isNewline(int codePoint) { |
| int type = Character.getType(codePoint); |
| return type == Character.PARAGRAPH_SEPARATOR || type == Character.LINE_SEPARATOR |
| || codePoint == LINE_FEED_CODE_POINT; |
| } |
| |
| private static boolean isWhiteSpace(int codePoint) { |
| return Character.isWhitespace(codePoint) || codePoint == NBSP_CODE_POINT; |
| } |
| |
| /** @hide */ |
| @Nullable |
| public static String withoutPrefix(@Nullable String prefix, @Nullable String str) { |
| if (prefix == null || str == null) return str; |
| return str.startsWith(prefix) ? str.substring(prefix.length()) : str; |
| } |
| |
| /** |
| * Remove html, remove bad characters, and truncate string. |
| * |
| * <p>This method is meant to remove common mistakes and nefarious formatting from strings that |
| * were loaded from untrusted sources (such as other packages). |
| * |
| * <p>This method first {@link Html#fromHtml treats the string like HTML} and then ... |
| * <ul> |
| * <li>Removes new lines or truncates at first new line |
| * <li>Trims the white-space off the end |
| * <li>Truncates the string |
| * </ul> |
| * ... if specified. |
| * |
| * @param unclean The input string |
| * @param maxCharactersToConsider The maximum number of characters of {@code unclean} to |
| * consider from the input string. {@code 0} disables this |
| * feature. |
| * @param ellipsizeDip Assuming maximum length of the string (in dip), assuming font size 42. |
| * This is roughly 50 characters for {@code ellipsizeDip == 1000}.<br /> |
| * Usually ellipsizing should be left to the view showing the string. If a |
| * string is used as an input to another string, it might be useful to |
| * control the length of the input string though. {@code 0} disables this |
| * feature. |
| * @param flags Flags controlling cleaning behavior (Can be {@link #SAFE_STRING_FLAG_TRIM}, |
| * {@link #SAFE_STRING_FLAG_SINGLE_LINE}, |
| * and {@link #SAFE_STRING_FLAG_FIRST_LINE}) |
| * |
| * @return The cleaned string |
| */ |
| public static @NonNull CharSequence makeSafeForPresentation(@NonNull String unclean, |
| @IntRange(from = 0) int maxCharactersToConsider, |
| @FloatRange(from = 0) float ellipsizeDip, @SafeStringFlags int flags) { |
| boolean onlyKeepFirstLine = ((flags & SAFE_STRING_FLAG_FIRST_LINE) != 0); |
| boolean forceSingleLine = ((flags & SAFE_STRING_FLAG_SINGLE_LINE) != 0); |
| boolean trim = ((flags & SAFE_STRING_FLAG_TRIM) != 0); |
| |
| Preconditions.checkNotNull(unclean); |
| Preconditions.checkArgumentNonnegative(maxCharactersToConsider); |
| Preconditions.checkArgumentNonNegative(ellipsizeDip, "ellipsizeDip"); |
| Preconditions.checkFlagsArgument(flags, SAFE_STRING_FLAG_TRIM |
| | SAFE_STRING_FLAG_SINGLE_LINE | SAFE_STRING_FLAG_FIRST_LINE); |
| Preconditions.checkArgument(!(onlyKeepFirstLine && forceSingleLine), |
| "Cannot set SAFE_STRING_FLAG_SINGLE_LINE and SAFE_STRING_FLAG_FIRST_LINE at the" |
| + "same time"); |
| |
| String shortString; |
| if (maxCharactersToConsider > 0) { |
| shortString = unclean.substring(0, Math.min(unclean.length(), maxCharactersToConsider)); |
| } else { |
| shortString = unclean; |
| } |
| |
| // Treat string as HTML. This |
| // - converts HTML symbols: e.g. ß -> ß |
| // - applies some HTML tags: e.g. <br> -> \n |
| // - removes invalid characters such as \b |
| // - removes html styling, such as <b> |
| // - applies html formatting: e.g. a<p>b</p>c -> a\n\nb\n\nc |
| // - replaces some html tags by "object replacement" markers: <img> -> \ufffc |
| // - Removes leading white space |
| // - Removes all trailing white space beside a single space |
| // - Collapses double white space |
| StringWithRemovedChars gettingCleaned = new StringWithRemovedChars( |
| Html.fromHtml(shortString).toString()); |
| |
| int firstNonWhiteSpace = -1; |
| int firstTrailingWhiteSpace = -1; |
| |
| // Remove new lines (if requested) and control characters. |
| int uncleanLength = gettingCleaned.length(); |
| for (int offset = 0; offset < uncleanLength; ) { |
| int codePoint = gettingCleaned.codePointAt(offset); |
| int type = Character.getType(codePoint); |
| int codePointLen = Character.charCount(codePoint); |
| boolean isNewline = isNewline(codePoint); |
| |
| if (onlyKeepFirstLine && isNewline) { |
| gettingCleaned.removeAllCharAfter(offset); |
| break; |
| } else if (forceSingleLine && isNewline) { |
| gettingCleaned.removeRange(offset, offset + codePointLen); |
| } else if (type == Character.CONTROL && !isNewline) { |
| gettingCleaned.removeRange(offset, offset + codePointLen); |
| } else if (trim && !isWhiteSpace(codePoint)) { |
| // This is only executed if the code point is not removed |
| if (firstNonWhiteSpace == -1) { |
| firstNonWhiteSpace = offset; |
| } |
| firstTrailingWhiteSpace = offset + codePointLen; |
| } |
| |
| offset += codePointLen; |
| } |
| |
| if (trim) { |
| // Remove leading and trailing white space |
| if (firstNonWhiteSpace == -1) { |
| // No non whitespace found, remove all |
| gettingCleaned.removeAllCharAfter(0); |
| } else { |
| if (firstNonWhiteSpace > 0) { |
| gettingCleaned.removeAllCharBefore(firstNonWhiteSpace); |
| } |
| if (firstTrailingWhiteSpace < uncleanLength) { |
| gettingCleaned.removeAllCharAfter(firstTrailingWhiteSpace); |
| } |
| } |
| } |
| |
| if (ellipsizeDip == 0) { |
| return gettingCleaned.toString(); |
| } else { |
| // Truncate |
| final TextPaint paint = new TextPaint(); |
| paint.setTextSize(42); |
| |
| return TextUtils.ellipsize(gettingCleaned.toString(), paint, ellipsizeDip, |
| TextUtils.TruncateAt.END); |
| } |
| } |
| |
| /** |
| * A special string manipulation class. Just records removals and executes the when onString() |
| * is called. |
| */ |
| private static class StringWithRemovedChars { |
| /** The original string */ |
| private final String mOriginal; |
| |
| /** |
| * One bit per char in string. If bit is set, character needs to be removed. If whole |
| * bit field is not initialized nothing needs to be removed. |
| */ |
| private BitSet mRemovedChars; |
| |
| StringWithRemovedChars(@NonNull String original) { |
| mOriginal = original; |
| } |
| |
| /** |
| * Mark all chars in a range {@code [firstRemoved - firstNonRemoved[} (not including |
| * firstNonRemoved) as removed. |
| */ |
| void removeRange(int firstRemoved, int firstNonRemoved) { |
| if (mRemovedChars == null) { |
| mRemovedChars = new BitSet(mOriginal.length()); |
| } |
| |
| mRemovedChars.set(firstRemoved, firstNonRemoved); |
| } |
| |
| /** |
| * Remove all characters before {@code firstNonRemoved}. |
| */ |
| void removeAllCharBefore(int firstNonRemoved) { |
| if (mRemovedChars == null) { |
| mRemovedChars = new BitSet(mOriginal.length()); |
| } |
| |
| mRemovedChars.set(0, firstNonRemoved); |
| } |
| |
| /** |
| * Remove all characters after and including {@code firstRemoved}. |
| */ |
| void removeAllCharAfter(int firstRemoved) { |
| if (mRemovedChars == null) { |
| mRemovedChars = new BitSet(mOriginal.length()); |
| } |
| |
| mRemovedChars.set(firstRemoved, mOriginal.length()); |
| } |
| |
| @Override |
| public String toString() { |
| // Common case, no chars removed |
| if (mRemovedChars == null) { |
| return mOriginal; |
| } |
| |
| StringBuilder sb = new StringBuilder(mOriginal.length()); |
| for (int i = 0; i < mOriginal.length(); i++) { |
| if (!mRemovedChars.get(i)) { |
| sb.append(mOriginal.charAt(i)); |
| } |
| } |
| |
| return sb.toString(); |
| } |
| |
| /** |
| * Return length or the original string |
| */ |
| int length() { |
| return mOriginal.length(); |
| } |
| |
| /** |
| * Return codePoint of original string at a certain {@code offset} |
| */ |
| int codePointAt(int offset) { |
| return mOriginal.codePointAt(offset); |
| } |
| } |
| |
| private static Object sLock = new Object(); |
| |
| private static char[] sTemp = null; |
| |
| private static String[] EMPTY_STRING_ARRAY = new String[]{}; |
| } |