| /* | 
 |  * Copyright (C) 2015 The Android Open Source Project | 
 |  * | 
 |  * Licensed under the Apache License, Version 2.0 (the "License"); | 
 |  * you may not use this file except in compliance with the License. | 
 |  * You may obtain a copy of the License at | 
 |  * | 
 |  *      http://www.apache.org/licenses/LICENSE-2.0 | 
 |  * | 
 |  * Unless required by applicable law or agreed to in writing, software | 
 |  * distributed under the License is distributed on an "AS IS" BASIS, | 
 |  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 |  * See the License for the specific language governing permissions and | 
 |  * limitations under the License. | 
 |  */ | 
 | #include "ClipArea.h" | 
 |  | 
 | #include "utils/LinearAllocator.h" | 
 |  | 
 | #include <SkPath.h> | 
 | #include <limits> | 
 | #include <type_traits> | 
 |  | 
 | namespace android { | 
 | namespace uirenderer { | 
 |  | 
 | static void handlePoint(Rect& transformedBounds, const Matrix4& transform, float x, float y) { | 
 |     Vertex v = {x, y}; | 
 |     transform.mapPoint(v.x, v.y); | 
 |     transformedBounds.expandToCover(v.x, v.y); | 
 | } | 
 |  | 
 | Rect transformAndCalculateBounds(const Rect& r, const Matrix4& transform) { | 
 |     const float kMinFloat = std::numeric_limits<float>::lowest(); | 
 |     const float kMaxFloat = std::numeric_limits<float>::max(); | 
 |     Rect transformedBounds = { kMaxFloat, kMaxFloat, kMinFloat, kMinFloat }; | 
 |     handlePoint(transformedBounds, transform, r.left, r.top); | 
 |     handlePoint(transformedBounds, transform, r.right, r.top); | 
 |     handlePoint(transformedBounds, transform, r.left, r.bottom); | 
 |     handlePoint(transformedBounds, transform, r.right, r.bottom); | 
 |     return transformedBounds; | 
 | } | 
 |  | 
 | /* | 
 |  * TransformedRectangle | 
 |  */ | 
 |  | 
 | TransformedRectangle::TransformedRectangle() { | 
 | } | 
 |  | 
 | TransformedRectangle::TransformedRectangle(const Rect& bounds, | 
 |         const Matrix4& transform) | 
 |         : mBounds(bounds) | 
 |         , mTransform(transform) { | 
 | } | 
 |  | 
 | bool TransformedRectangle::canSimplyIntersectWith( | 
 |         const TransformedRectangle& other) const { | 
 |  | 
 |     return mTransform == other.mTransform; | 
 | } | 
 |  | 
 | void TransformedRectangle::intersectWith(const TransformedRectangle& other) { | 
 |     mBounds.doIntersect(other.mBounds); | 
 | } | 
 |  | 
 | bool TransformedRectangle::isEmpty() const { | 
 |     return mBounds.isEmpty(); | 
 | } | 
 |  | 
 | /* | 
 |  * RectangleList | 
 |  */ | 
 |  | 
 | RectangleList::RectangleList() | 
 |         : mTransformedRectanglesCount(0) { | 
 | } | 
 |  | 
 | bool RectangleList::isEmpty() const { | 
 |     if (mTransformedRectanglesCount < 1) { | 
 |         return true; | 
 |     } | 
 |  | 
 |     for (int i = 0; i < mTransformedRectanglesCount; i++) { | 
 |         if (mTransformedRectangles[i].isEmpty()) { | 
 |             return true; | 
 |         } | 
 |     } | 
 |     return false; | 
 | } | 
 |  | 
 | int RectangleList::getTransformedRectanglesCount() const { | 
 |     return mTransformedRectanglesCount; | 
 | } | 
 |  | 
 | const TransformedRectangle& RectangleList::getTransformedRectangle(int i) const { | 
 |     return mTransformedRectangles[i]; | 
 | } | 
 |  | 
 | void RectangleList::setEmpty() { | 
 |     mTransformedRectanglesCount = 0; | 
 | } | 
 |  | 
 | void RectangleList::set(const Rect& bounds, const Matrix4& transform) { | 
 |     mTransformedRectanglesCount = 1; | 
 |     mTransformedRectangles[0] = TransformedRectangle(bounds, transform); | 
 | } | 
 |  | 
 | bool RectangleList::intersectWith(const Rect& bounds, | 
 |         const Matrix4& transform) { | 
 |     TransformedRectangle newRectangle(bounds, transform); | 
 |  | 
 |     // Try to find a rectangle with a compatible transformation | 
 |     int index = 0; | 
 |     for (; index < mTransformedRectanglesCount; index++) { | 
 |         TransformedRectangle& tr(mTransformedRectangles[index]); | 
 |         if (tr.canSimplyIntersectWith(newRectangle)) { | 
 |             tr.intersectWith(newRectangle); | 
 |             return true; | 
 |         } | 
 |     } | 
 |  | 
 |     // Add it to the list if there is room | 
 |     if (index < kMaxTransformedRectangles) { | 
 |         mTransformedRectangles[index] = newRectangle; | 
 |         mTransformedRectanglesCount += 1; | 
 |         return true; | 
 |     } | 
 |  | 
 |     // This rectangle list is full | 
 |     return false; | 
 | } | 
 |  | 
 | Rect RectangleList::calculateBounds() const { | 
 |     Rect bounds; | 
 |     for (int index = 0; index < mTransformedRectanglesCount; index++) { | 
 |         const TransformedRectangle& tr(mTransformedRectangles[index]); | 
 |         if (index == 0) { | 
 |             bounds = tr.transformedBounds(); | 
 |         } else { | 
 |             bounds.doIntersect(tr.transformedBounds()); | 
 |         } | 
 |     } | 
 |     return bounds; | 
 | } | 
 |  | 
 | static SkPath pathFromTransformedRectangle(const Rect& bounds, | 
 |         const Matrix4& transform) { | 
 |     SkPath rectPath; | 
 |     SkPath rectPathTransformed; | 
 |     rectPath.addRect(bounds.left, bounds.top, bounds.right, bounds.bottom); | 
 |     SkMatrix skTransform; | 
 |     transform.copyTo(skTransform); | 
 |     rectPath.transform(skTransform, &rectPathTransformed); | 
 |     return rectPathTransformed; | 
 | } | 
 |  | 
 | SkRegion RectangleList::convertToRegion(const SkRegion& clip) const { | 
 |     SkRegion rectangleListAsRegion; | 
 |     for (int index = 0; index < mTransformedRectanglesCount; index++) { | 
 |         const TransformedRectangle& tr(mTransformedRectangles[index]); | 
 |         SkPath rectPathTransformed = pathFromTransformedRectangle( | 
 |                 tr.getBounds(), tr.getTransform()); | 
 |         if (index == 0) { | 
 |             rectangleListAsRegion.setPath(rectPathTransformed, clip); | 
 |         } else { | 
 |             SkRegion rectRegion; | 
 |             rectRegion.setPath(rectPathTransformed, clip); | 
 |             rectangleListAsRegion.op(rectRegion, SkRegion::kIntersect_Op); | 
 |         } | 
 |     } | 
 |     return rectangleListAsRegion; | 
 | } | 
 |  | 
 | void RectangleList::transform(const Matrix4& transform) { | 
 |     for (int index = 0; index < mTransformedRectanglesCount; index++) { | 
 |         mTransformedRectangles[index].transform(transform); | 
 |     } | 
 | } | 
 |  | 
 | /* | 
 |  * ClipArea | 
 |  */ | 
 |  | 
 | ClipArea::ClipArea() | 
 |         : mMode(ClipMode::Rectangle) { | 
 | } | 
 |  | 
 | /* | 
 |  * Interface | 
 |  */ | 
 |  | 
 | void ClipArea::setViewportDimensions(int width, int height) { | 
 |     mPostViewportClipObserved = false; | 
 |     mViewportBounds.set(0, 0, width, height); | 
 |     mClipRect = mViewportBounds; | 
 | } | 
 |  | 
 | void ClipArea::setEmpty() { | 
 |     onClipUpdated(); | 
 |     mMode = ClipMode::Rectangle; | 
 |     mClipRect.setEmpty(); | 
 |     mClipRegion.setEmpty(); | 
 |     mRectangleList.setEmpty(); | 
 | } | 
 |  | 
 | void ClipArea::setClip(float left, float top, float right, float bottom) { | 
 |     onClipUpdated(); | 
 |     mMode = ClipMode::Rectangle; | 
 |     mClipRect.set(left, top, right, bottom); | 
 |     mClipRegion.setEmpty(); | 
 | } | 
 |  | 
 | void ClipArea::clipRectWithTransform(const Rect& r, const mat4* transform, | 
 |         SkRegion::Op op) { | 
 |     if (!mPostViewportClipObserved && op == SkRegion::kIntersect_Op) op = SkRegion::kReplace_Op; | 
 |     onClipUpdated(); | 
 |     switch (mMode) { | 
 |     case ClipMode::Rectangle: | 
 |         rectangleModeClipRectWithTransform(r, transform, op); | 
 |         break; | 
 |     case ClipMode::RectangleList: | 
 |         rectangleListModeClipRectWithTransform(r, transform, op); | 
 |         break; | 
 |     case ClipMode::Region: | 
 |         regionModeClipRectWithTransform(r, transform, op); | 
 |         break; | 
 |     } | 
 | } | 
 |  | 
 | void ClipArea::clipRegion(const SkRegion& region, SkRegion::Op op) { | 
 |     if (!mPostViewportClipObserved && op == SkRegion::kIntersect_Op) op = SkRegion::kReplace_Op; | 
 |     onClipUpdated(); | 
 |     enterRegionMode(); | 
 |     mClipRegion.op(region, op); | 
 |     onClipRegionUpdated(); | 
 | } | 
 |  | 
 | void ClipArea::clipPathWithTransform(const SkPath& path, const mat4* transform, | 
 |         SkRegion::Op op) { | 
 |     if (!mPostViewportClipObserved && op == SkRegion::kIntersect_Op) op = SkRegion::kReplace_Op; | 
 |     onClipUpdated(); | 
 |     SkMatrix skTransform; | 
 |     transform->copyTo(skTransform); | 
 |     SkPath transformed; | 
 |     path.transform(skTransform, &transformed); | 
 |     SkRegion region; | 
 |     regionFromPath(transformed, region); | 
 |     clipRegion(region, op); | 
 | } | 
 |  | 
 | /* | 
 |  * Rectangle mode | 
 |  */ | 
 |  | 
 | void ClipArea::enterRectangleMode() { | 
 |     // Entering rectangle mode discards any | 
 |     // existing clipping information from the other modes. | 
 |     // The only way this occurs is by a clip setting operation. | 
 |     mMode = ClipMode::Rectangle; | 
 | } | 
 |  | 
 | void ClipArea::rectangleModeClipRectWithTransform(const Rect& r, | 
 |         const mat4* transform, SkRegion::Op op) { | 
 |  | 
 |     if (op == SkRegion::kReplace_Op && transform->rectToRect()) { | 
 |         mClipRect = r; | 
 |         transform->mapRect(mClipRect); | 
 |         return; | 
 |     } else if (op != SkRegion::kIntersect_Op) { | 
 |         enterRegionMode(); | 
 |         regionModeClipRectWithTransform(r, transform, op); | 
 |         return; | 
 |     } | 
 |  | 
 |     if (transform->rectToRect()) { | 
 |         Rect transformed(r); | 
 |         transform->mapRect(transformed); | 
 |         mClipRect.doIntersect(transformed); | 
 |         return; | 
 |     } | 
 |  | 
 |     enterRectangleListMode(); | 
 |     rectangleListModeClipRectWithTransform(r, transform, op); | 
 | } | 
 |  | 
 | /* | 
 |  * RectangleList mode implementation | 
 |  */ | 
 |  | 
 | void ClipArea::enterRectangleListMode() { | 
 |     // Is is only legal to enter rectangle list mode from | 
 |     // rectangle mode, since rectangle list mode cannot represent | 
 |     // all clip areas that can be represented by a region. | 
 |     ALOG_ASSERT(mMode == ClipMode::Rectangle); | 
 |     mMode = ClipMode::RectangleList; | 
 |     mRectangleList.set(mClipRect, Matrix4::identity()); | 
 | } | 
 |  | 
 | void ClipArea::rectangleListModeClipRectWithTransform(const Rect& r, | 
 |         const mat4* transform, SkRegion::Op op) { | 
 |     if (op != SkRegion::kIntersect_Op | 
 |             || !mRectangleList.intersectWith(r, *transform)) { | 
 |         enterRegionMode(); | 
 |         regionModeClipRectWithTransform(r, transform, op); | 
 |     } | 
 | } | 
 |  | 
 | /* | 
 |  * Region mode implementation | 
 |  */ | 
 |  | 
 | void ClipArea::enterRegionMode() { | 
 |     ClipMode oldMode = mMode; | 
 |     mMode = ClipMode::Region; | 
 |     if (oldMode != ClipMode::Region) { | 
 |         if (oldMode == ClipMode::Rectangle) { | 
 |             mClipRegion.setRect(mClipRect.toSkIRect()); | 
 |         } else { | 
 |             mClipRegion = mRectangleList.convertToRegion(createViewportRegion()); | 
 |             onClipRegionUpdated(); | 
 |         } | 
 |     } | 
 | } | 
 |  | 
 | void ClipArea::regionModeClipRectWithTransform(const Rect& r, | 
 |         const mat4* transform, SkRegion::Op op) { | 
 |     SkPath transformedRect = pathFromTransformedRectangle(r, *transform); | 
 |     SkRegion transformedRectRegion; | 
 |     regionFromPath(transformedRect, transformedRectRegion); | 
 |     mClipRegion.op(transformedRectRegion, op); | 
 |     onClipRegionUpdated(); | 
 | } | 
 |  | 
 | void ClipArea::onClipRegionUpdated() { | 
 |     if (!mClipRegion.isEmpty()) { | 
 |         mClipRect.set(mClipRegion.getBounds()); | 
 |  | 
 |         if (mClipRegion.isRect()) { | 
 |             mClipRegion.setEmpty(); | 
 |             enterRectangleMode(); | 
 |         } | 
 |     } else { | 
 |         mClipRect.setEmpty(); | 
 |     } | 
 | } | 
 |  | 
 | /** | 
 |  * Clip serialization | 
 |  */ | 
 |  | 
 | const ClipBase* ClipArea::serializeClip(LinearAllocator& allocator) { | 
 |     if (!mPostViewportClipObserved) { | 
 |         // Only initial clip-to-viewport observed, so no serialization of clip necessary | 
 |         return nullptr; | 
 |     } | 
 |  | 
 |     static_assert(std::is_trivially_destructible<Rect>::value, | 
 |             "expect Rect to be trivially destructible"); | 
 |     static_assert(std::is_trivially_destructible<RectangleList>::value, | 
 |             "expect RectangleList to be trivially destructible"); | 
 |  | 
 |     if (mLastSerialization == nullptr) { | 
 |         ClipBase* serialization = nullptr; | 
 |         switch (mMode) { | 
 |         case ClipMode::Rectangle: | 
 |             serialization = allocator.create<ClipRect>(mClipRect); | 
 |             break; | 
 |         case ClipMode::RectangleList: | 
 |             serialization = allocator.create<ClipRectList>(mRectangleList); | 
 |             serialization->rect = mRectangleList.calculateBounds(); | 
 |             break; | 
 |         case ClipMode::Region: | 
 |             serialization = allocator.create<ClipRegion>(mClipRegion); | 
 |             serialization->rect.set(mClipRegion.getBounds()); | 
 |             break; | 
 |         } | 
 |         mLastSerialization = serialization; | 
 |     } | 
 |     return mLastSerialization; | 
 | } | 
 |  | 
 | inline static const Rect& getRect(const ClipBase* scb) { | 
 |     return reinterpret_cast<const ClipRect*>(scb)->rect; | 
 | } | 
 |  | 
 | inline static const RectangleList& getRectList(const ClipBase* scb) { | 
 |     return reinterpret_cast<const ClipRectList*>(scb)->rectList; | 
 | } | 
 |  | 
 | inline static const SkRegion& getRegion(const ClipBase* scb) { | 
 |     return reinterpret_cast<const ClipRegion*>(scb)->region; | 
 | } | 
 |  | 
 | // Conservative check for too many rectangles to fit in rectangle list. | 
 | // For simplicity, doesn't account for rect merging | 
 | static bool cannotFitInRectangleList(const ClipArea& clipArea, const ClipBase* scb) { | 
 |     int currentRectCount = clipArea.isRectangleList() | 
 |             ? clipArea.getRectangleList().getTransformedRectanglesCount() | 
 |             : 1; | 
 |     int recordedRectCount = (scb->mode == ClipMode::RectangleList) | 
 |             ? getRectList(scb).getTransformedRectanglesCount() | 
 |             : 1; | 
 |     return currentRectCount + recordedRectCount > RectangleList::kMaxTransformedRectangles; | 
 | } | 
 |  | 
 | const ClipBase* ClipArea::serializeIntersectedClip(LinearAllocator& allocator, | 
 |         const ClipBase* recordedClip, const Matrix4& recordedClipTransform) { | 
 |     // if no recordedClip passed, just serialize current state | 
 |     if (!recordedClip) return serializeClip(allocator); | 
 |  | 
 |     if (!mLastResolutionResult | 
 |             || recordedClip != mLastResolutionClip | 
 |             || recordedClipTransform != mLastResolutionTransform) { | 
 |         mLastResolutionClip = recordedClip; | 
 |         mLastResolutionTransform = recordedClipTransform; | 
 |  | 
 |         if (CC_LIKELY(mMode == ClipMode::Rectangle | 
 |                 && recordedClip->mode == ClipMode::Rectangle | 
 |                 && recordedClipTransform.rectToRect())) { | 
 |             // common case - result is a single rectangle | 
 |             auto rectClip = allocator.create<ClipRect>(getRect(recordedClip)); | 
 |             recordedClipTransform.mapRect(rectClip->rect); | 
 |             rectClip->rect.doIntersect(mClipRect); | 
 |             mLastResolutionResult = rectClip; | 
 |         } else if (CC_UNLIKELY(mMode == ClipMode::Region | 
 |                 || recordedClip->mode == ClipMode::Region | 
 |                 || cannotFitInRectangleList(*this, recordedClip))) { | 
 |             // region case | 
 |             SkRegion other; | 
 |             switch (recordedClip->mode) { | 
 |             case ClipMode::Rectangle: | 
 |                 if (CC_LIKELY(recordedClipTransform.rectToRect())) { | 
 |                     // simple transform, skip creating SkPath | 
 |                     Rect resultClip(getRect(recordedClip)); | 
 |                     recordedClipTransform.mapRect(resultClip); | 
 |                     other.setRect(resultClip.toSkIRect()); | 
 |                 } else { | 
 |                     SkPath transformedRect = pathFromTransformedRectangle(getRect(recordedClip), | 
 |                             recordedClipTransform); | 
 |                     other.setPath(transformedRect, createViewportRegion()); | 
 |                 } | 
 |                 break; | 
 |             case ClipMode::RectangleList: { | 
 |                 RectangleList transformedList(getRectList(recordedClip)); | 
 |                 transformedList.transform(recordedClipTransform); | 
 |                 other = transformedList.convertToRegion(createViewportRegion()); | 
 |                 break; | 
 |             } | 
 |             case ClipMode::Region: | 
 |                 other = getRegion(recordedClip); | 
 |  | 
 |                 // TODO: handle non-translate transforms properly! | 
 |                 other.translate(recordedClipTransform.getTranslateX(), | 
 |                         recordedClipTransform.getTranslateY()); | 
 |             } | 
 |  | 
 |             ClipRegion* regionClip = allocator.create<ClipRegion>(); | 
 |             switch (mMode) { | 
 |             case ClipMode::Rectangle: | 
 |                 regionClip->region.op(mClipRect.toSkIRect(), other, SkRegion::kIntersect_Op); | 
 |                 break; | 
 |             case ClipMode::RectangleList: | 
 |                 regionClip->region.op(mRectangleList.convertToRegion(createViewportRegion()), | 
 |                         other, SkRegion::kIntersect_Op); | 
 |                 break; | 
 |             case ClipMode::Region: | 
 |                 regionClip->region.op(mClipRegion, other, SkRegion::kIntersect_Op); | 
 |                 break; | 
 |             } | 
 |             regionClip->rect.set(regionClip->region.getBounds()); | 
 |             mLastResolutionResult = regionClip; | 
 |         } else { | 
 |             auto rectListClip = allocator.create<ClipRectList>(mRectangleList); | 
 |             auto&& rectList = rectListClip->rectList; | 
 |             if (mMode == ClipMode::Rectangle) { | 
 |                 rectList.set(mClipRect, Matrix4::identity()); | 
 |             } | 
 |  | 
 |             if (recordedClip->mode == ClipMode::Rectangle) { | 
 |                 rectList.intersectWith(getRect(recordedClip), recordedClipTransform); | 
 |             } else { | 
 |                 const RectangleList& other = getRectList(recordedClip); | 
 |                 for (int i = 0; i < other.getTransformedRectanglesCount(); i++) { | 
 |                     auto&& tr = other.getTransformedRectangle(i); | 
 |                     Matrix4 totalTransform(recordedClipTransform); | 
 |                     totalTransform.multiply(tr.getTransform()); | 
 |                     rectList.intersectWith(tr.getBounds(), totalTransform); | 
 |                 } | 
 |             } | 
 |             rectListClip->rect = rectList.calculateBounds(); | 
 |             mLastResolutionResult = rectListClip; | 
 |         } | 
 |     } | 
 |     return mLastResolutionResult; | 
 | } | 
 |  | 
 | void ClipArea::applyClip(const ClipBase* clip, const Matrix4& transform) { | 
 |     if (!clip) return; // nothing to do | 
 |  | 
 |     if (CC_LIKELY(clip->mode == ClipMode::Rectangle)) { | 
 |         clipRectWithTransform(getRect(clip), &transform, SkRegion::kIntersect_Op); | 
 |     } else if (CC_LIKELY(clip->mode == ClipMode::RectangleList)) { | 
 |         auto&& rectList = getRectList(clip); | 
 |         for (int i = 0; i < rectList.getTransformedRectanglesCount(); i++) { | 
 |             auto&& tr = rectList.getTransformedRectangle(i); | 
 |             Matrix4 totalTransform(transform); | 
 |             totalTransform.multiply(tr.getTransform()); | 
 |             clipRectWithTransform(tr.getBounds(), &totalTransform, SkRegion::kIntersect_Op); | 
 |         } | 
 |     } else { | 
 |         SkRegion region(getRegion(clip)); | 
 |         // TODO: handle non-translate transforms properly! | 
 |         region.translate(transform.getTranslateX(), transform.getTranslateY()); | 
 |         clipRegion(region, SkRegion::kIntersect_Op); | 
 |     } | 
 | } | 
 |  | 
 | } /* namespace uirenderer */ | 
 | } /* namespace android */ |