packages/SettingsLib/res/values/arrays.xml

<?xml version="1.0" encoding="utf-8"?>
<!--
/*
**
** Copyright 2015 The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
**     http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
-->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">

    <!-- Wi-Fi settings -->

    <!-- Match this with the order of NetworkInfo.DetailedState. --> <skip />
    <!-- Wi-Fi settings. The status messages when the network is unknown. -->
    <string-array name="wifi_status">
        <!-- Status message of Wi-Fi when it is idle. -->
        <item></item>
        <!-- Status message of Wi-Fi when it is scanning. -->
        <item>Scanning\u2026</item>
        <!-- Status message of Wi-Fi when it is connecting. -->
        <item>Connecting\u2026</item>
        <!-- Status message of Wi-Fi when it is authenticating. -->
        <item>Authenticating\u2026</item>
        <!-- Status message of Wi-Fi when it is obtaining IP address. -->
        <item>Obtaining IP address\u2026</item>
        <!-- Status message of Wi-Fi when it is connected. -->
        <item>Connected</item>
        <!-- Status message of Wi-Fi when it is suspended. -->
        <item>Suspended</item>
        <!-- Status message of Wi-Fi when it is disconnecting. -->
        <item>Disconnecting\u2026</item>
        <!-- Status message of Wi-Fi when it is disconnected. -->
        <item>Disconnected</item>
        <!-- Status message of Wi-Fi when it is a failure. -->
        <item>Unsuccessful</item>
        <!-- Status message of Wi-Fi when it is blocked. -->
        <item>Blocked</item>
        <!-- Status message of Wi-Fi when connectiong is being verified. -->
        <item>Temporarily avoiding poor connection</item>
    </string-array>

    <!-- Match this with the order of NetworkInfo.DetailedState. --> <skip />
    <!-- Wi-Fi settings. The status messages when the network is known. -->
    <string-array name="wifi_status_with_ssid">
        <!-- Status message of Wi-Fi when it is idle. -->
        <item></item>
        <!-- Status message of Wi-Fi when it is scanning. -->
        <item>Scanning\u2026</item>
        <!-- Status message of Wi-Fi when it is connecting to a network. -->
        <item>Connecting to <xliff:g id="network_name">%1$s</xliff:g>\u2026</item>
        <!-- Status message of Wi-Fi when it is authenticating with a network. -->
        <item>Authenticating with <xliff:g id="network_name">%1$s</xliff:g>\u2026</item>
        <!-- Status message of Wi-Fi when it is obtaining IP address from a network. -->
        <item>Obtaining IP address from <xliff:g id="network_name">%1$s</xliff:g>\u2026</item>
        <!-- Status message of Wi-Fi when it is connected to a network. -->
        <item>Connected to <xliff:g id="network_name">%1$s</xliff:g></item>
        <!-- Status message of Wi-Fi when it is suspended. -->
        <item>Suspended</item>
        <!-- Status message of Wi-Fi when it is disconnecting from a network. -->
        <item>Disconnecting from <xliff:g id="network_name">%1$s</xliff:g>\u2026</item>
        <!-- Status message of Wi-Fi when it is disconnected. -->
        <item>Disconnected</item>
        <!-- Status message of Wi-Fi when it is a failure. -->
        <item>Unsuccessful</item>
        <!-- Status message of Wi-Fi when it is blocked. -->
        <item>Blocked</item>
        <!-- Status message of Wi-Fi when connectiong is being verified. -->
        <item>Temporarily avoiding poor connection</item>
    </string-array>

    <!-- Titles for HDCP checking preference. [CHAR LIMIT=35] -->
    <string-array name="hdcp_checking_titles">
        <item>Never check</item>
        <item>Check for DRM content only</item>
        <item>Always check</item>
    </string-array>

    <!-- Values for HDCP checking preference. -->
    <string-array name="hdcp_checking_values" translatable="false" >
        <item>never</item>
        <item>drm-only</item>
        <item>always</item>
    </string-array>

    <!-- Summaries for HDCP checking preference. [CHAR LIMIT=100]-->
    <string-array name="hdcp_checking_summaries" >
        <item>Never use HDCP checking</item>
        <item>Use HDCP checking for DRM content only</item>
        <item>Always use HDCP checking</item>
    </string-array>


    <!-- Bluetooth settings -->

    <!-- Titles for Bluetooth Audio Codec selection preference. [CHAR LIMIT=40] -->
    <string-array name="bluetooth_a2dp_codec_titles">
        <item>Use System Selection (Default)</item>
        <item>SBC</item>
        <item>aptX</item>
        <item>aptX HD</item>
        <item>LDAC</item>
    </string-array>

    <!-- Values for Bluetooth Audio Codec selection preference. -->
    <string-array name="bluetooth_a2dp_codec_values" translatable="false" >
        <item>1000000</item>
        <item>0</item>
        <item>1</item>
        <item>2</item>
        <item>3</item>
    </string-array>

    <!-- Summaries for Bluetooth Audio Codec selection preference. [CHAR LIMIT=40]-->
    <string-array name="bluetooth_a2dp_codec_summaries" >
        <item>Use System Selection (Default)</item>
        <item>SBC</item>
        <item>aptX</item>
        <item>aptX HD</item>
        <item>LDAC</item>
    </string-array>

    <!-- Titles for Bluetooth Audio Codec Sample Rate selection preference. [CHAR LIMIT=40] -->
    <string-array name="bluetooth_a2dp_codec_sample_rate_titles">
        <item>Use System Selection (Default)</item>
        <item>44.1 kHz</item>
        <item>48.0 kHz</item>
        <item>88.2 kHz</item>
        <item>96.0 kHz</item>
    </string-array>

    <!-- Values for Bluetooth Audio Codec Sample Rate selection preference. -->
    <string-array name="bluetooth_a2dp_codec_sample_rate_values" translatable="false" >
        <item>0</item>
        <item>1</item>
        <item>2</item>
        <item>4</item>
        <item>8</item>
    </string-array>

    <!-- Summaries for Bluetooth Audio Codec Sample Rate selection preference. [CHAR LIMIT=40]-->
    <string-array name="bluetooth_a2dp_codec_sample_rate_summaries" >
        <item>Use System Selection (Default)</item>
        <item>44.1 kHz</item>
        <item>48.0 kHz</item>
        <item>88.2 kHz</item>
        <item>96.0 kHz</item>
    </string-array>

    <!-- Titles for Bluetooth Audio Codec Bits Per Sample selection preference. [CHAR LIMIT=40] -->
    <string-array name="bluetooth_a2dp_codec_bits_per_sample_titles">
        <item>Use System Selection (Default)</item>
        <item>16 bits/sample</item>
        <item>24 bits/sample</item>
        <item>32 bits/sample</item>
    </string-array>

    <!-- Values for Bluetooth Audio Codec Bits Per Sample selection preference. -->
    <string-array name="bluetooth_a2dp_codec_bits_per_sample_values" translatable="false" >
        <item>0</item>
        <item>1</item>
        <item>2</item>
        <item>4</item>
    </string-array>

    <!-- Summaries for Bluetooth Audio Codec Bits Per Sample selection preference. [CHAR LIMIT=40]-->
    <string-array name="bluetooth_a2dp_codec_bits_per_sample_summaries" >
        <item>Use System Selection (Default)</item>
        <item>16 bits/sample</item>
        <item>24 bits/sample</item>
        <item>32 bits/sample</item>
    </string-array>

    <!-- Titles for Bluetooth Audio Codec Channel Mode selection preference. [CHAR LIMIT=40] -->
    <string-array name="bluetooth_a2dp_codec_channel_mode_titles">
        <item>Use System Selection (Default)</item>
        <item>Mono</item>
        <item>Stereo</item>
    </string-array>

    <!-- Values for Bluetooth Audio Codec Channel Mode selection preference. -->
    <string-array name="bluetooth_a2dp_codec_channel_mode_values" translatable="false" >
        <item>0</item>
        <item>1</item>
        <item>2</item>
    </string-array>

    <!-- Summaries for Bluetooth Audio Codec Channel Mode selection preference. [CHAR LIMIT=40]-->
    <string-array name="bluetooth_a2dp_codec_channel_mode_summaries" >
        <item>Use System Selection (Default)</item>
        <item>Mono</item>
        <item>Stereo</item>
    </string-array>

    <!-- Titles for Bluetooth Audio Codec LDAC Playback Quality selection preference. [CHAR LIMIT=70] -->
    <string-array name="bluetooth_a2dp_codec_ldac_playback_quality_titles">
        <item>Optimized for Audio Quality (990kbps/909kbps)</item>
        <item>Balanced Audio And Connection Quality (660kbps/606kbps)</item>
        <item>Optimized for Connection Quality (330kbps/303kbps)</item>
    </string-array>

    <!-- Values for Bluetooth Audio Codec LDAC Playback Quaility selection preference. -->
    <string-array name="bluetooth_a2dp_codec_ldac_playback_quality_values" translatable="false" >
        <item>1000</item>
        <item>1001</item>
        <item>1002</item>
    </string-array>

    <!-- Summaries for Bluetooth Audio Codec LDAC Playback Quality selection preference. [CHAR LIMIT=70]-->
    <string-array name="bluetooth_a2dp_codec_ldac_playback_quality_summaries" >
        <item>Optimized for Audio Quality</item>
        <item>Balanced Audio And Connection Quality</item>
        <item>Optimized for Connection Quality</item>
    </string-array>

    <!-- Titles for logd limit size selection preference. [CHAR LIMIT=14] -->
    <string-array name="select_logd_size_titles">
        <item>Off</item>
        <item>64K</item>
        <item>256K</item>
        <item>1M</item>
        <item>4M</item>
        <item>16M</item>
    </string-array>

    <!-- Titles for logd limit size lowram selection preference. [CHAR LIMIT=14] -->
    <string-array name="select_logd_size_lowram_titles">
        <item>Off</item>
        <item>64K</item>
        <item>256K</item>
        <item>1M</item>
    </string-array>

    <!-- Values for logd limit size selection preference. -->
    <string-array name="select_logd_size_values" translatable="false" >
        <item>32768</item>
        <item>65536</item>
        <item>262144</item>
        <item>1048576</item>
        <item>4194304</item>
        <item>16777216</item>
    </string-array>

    <!-- Summaries for logd limit size selection preference. [CHAR LIMIT=50]-->
    <string-array name="select_logd_size_summaries" >
        <item>Off</item>
        <item>64K per log buffer</item>
        <item>256K per log buffer</item>
        <item>1M per log buffer</item>
        <item>4M per log buffer</item>
        <item>16M per log buffer</item>
    </string-array>

    <!-- Values for logpersist state selection preference. -->
    <string-array name="select_logpersist_values" translatable="false" >
        <item></item>
        <item>all</item>
        <item>default,security,kernel</item>
        <item>kernel</item>
    </string-array>

    <!-- Titles for logpersist state selection preference. [CHAR LIMIT=26] -->
    <string-array name="select_logpersist_titles">
        <item>Off</item>
        <item>All</item>
        <item>All but radio</item>
        <item>kernel only</item>
    </string-array>

    <!-- Summaries for logpersist state selection preference. [CHAR LIMIT=50]-->
    <string-array name="select_logpersist_summaries" >
        <item>Off</item>
        <item>All log buffers</item>
        <item>All but radio log buffers</item>
        <item>kernel log buffer only</item>
    </string-array>

    <!-- Titles for window animation scale preference. [CHAR LIMIT=35] -->
    <string-array name="window_animation_scale_entries">
        <item>Animation off</item>
        <item>Animation scale .5x</item>
        <item>Animation scale 1x</item>
        <item>Animation scale 1.5x</item>
        <item>Animation scale 2x</item>
        <item>Animation scale 5x</item>
        <item>Animation scale 10x</item>
    </string-array>

    <!-- Values for window animation scale preference. -->
    <string-array name="window_animation_scale_values" translatable="false" >
        <item>0</item>
        <item>.5</item>
        <item>1</item>
        <item>1.5</item>
        <item>2</item>
        <item>5</item>
        <item>10</item>
    </string-array>

    <!-- Titles for transition animation scale preference. [CHAR LIMIT=35] -->
    <string-array name="transition_animation_scale_entries">
        <item>Animation off</item>
        <item>Animation scale .5x</item>
        <item>Animation scale 1x</item>
        <item>Animation scale 1.5x</item>
        <item>Animation scale 2x</item>
        <item>Animation scale 5x</item>
        <item>Animation scale 10x</item>
    </string-array>

    <!-- Values for transition animation scale preference. -->
    <string-array name="transition_animation_scale_values" translatable="false" >
        <item>0</item>
        <item>.5</item>
        <item>1</item>
        <item>1.5</item>
        <item>2</item>
        <item>5</item>
        <item>10</item>
    </string-array>

    <!-- Titles for animator duration scale preference. [CHAR LIMIT=35] -->
    <string-array name="animator_duration_scale_entries">
        <item>Animation off</item>
        <item>Animation scale .5x</item>
        <item>Animation scale 1x</item>
        <item>Animation scale 1.5x</item>
        <item>Animation scale 2x</item>
        <item>Animation scale 5x</item>
        <item>Animation scale 10x</item>
    </string-array>

    <!-- Values for animator duration scale preference. -->
    <string-array name="animator_duration_scale_values" translatable="false" >
        <item>0</item>
        <item>.5</item>
        <item>1</item>
        <item>1.5</item>
        <item>2</item>
        <item>5</item>
        <item>10</item>
    </string-array>

    <!-- Titles for overlay display devices preference. [CHAR LIMIT=35] -->
    <string-array name="overlay_display_devices_entries">
        <item>None</item>
        <item>480p</item>
        <item>480p (secure)</item>
        <item>720p</item>
        <item>720p (secure)</item>
        <item>1080p</item>
        <item>1080p (secure)</item>
        <item>4K</item>
        <item>4K (secure)</item>
        <item>4K (upscaled)</item>
        <item>4K (upscaled, secure)</item>
        <item>720p, 1080p (dual screen)</item>
    </string-array>

    <!-- Values for overlay display devices preference. -->
    <string-array name="overlay_display_devices_values" translatable="false" >
        <item></item>
        <item>720x480/142</item>
        <item>720x480/142,secure</item>
        <item>1280x720/213</item>
        <item>1280x720/213,secure</item>
        <item>1920x1080/320</item>
        <item>1920x1080/320,secure</item>
        <item>3840x2160/320</item>
        <item>3840x2160/320,secure</item>
        <item>1920x1080/320|3840x2160/640</item>
        <item>1920x1080/320|3840x2160/640,secure</item>
        <item>1280x720/213;1920x1080/320</item>
    </string-array>

    <!-- Titles for OpenGL traces preference. [CHAR LIMIT=35] -->
    <string-array name="enable_opengl_traces_entries">
        <item>None</item>
        <item>Logcat</item>
        <item>Systrace (Graphics)</item>
        <item>Call stack on glGetError</item>
    </string-array>

    <!-- Values for OpenGL traces preference. -->
    <string-array name="enable_opengl_traces_values" translatable="false" >
        <item>0</item>
        <item>1</item>
        <item>systrace</item>
        <item>error</item>
    </string-array>

    <!-- Titles for non-rectangular clipping preference. [CHAR LIMIT=35] -->
    <string-array name="show_non_rect_clip_entries">
        <item>Off</item>
        <item>Draw non-rectangular clip region in blue</item>
        <item>Highlight tested drawing commands in green</item>
    </string-array>

    <!-- Values for non-rectangular clipping preference. -->
    <string-array name="show_non_rect_clip_values" translatable="false" >
        <item>hide</item>
        <item>region</item>
        <item>highlight</item>
    </string-array>

    <!-- Titles for frame time tracking preference. [CHAR LIMIT=35] -->
    <string-array name="track_frame_time_entries">
        <item>Off</item>
        <item>On screen as bars</item>
        <item>In adb shell dumpsys gfxinfo</item>
    </string-array>

    <!-- Values for frame time tracking preference. -->
    <string-array name="track_frame_time_values" translatable="false" >
        <item>false</item>
        <item>visual_bars</item>
        <item>true</item>
    </string-array>

    <!-- Titles for debug overdraw preference. [CHAR LIMIT=50] -->
    <string-array name="debug_hw_overdraw_entries">
        <item>Off</item>
        <item>Show overdraw areas</item>
        <item>Show areas for Deuteranomaly</item>
    </string-array>

    <!-- Values for debug overdraw preference. -->
    <string-array name="debug_hw_overdraw_values" translatable="false" >
        <item>false</item>
        <item>show</item>
        <item>show_deuteranomaly</item>
    </string-array>

    <!-- Titles for app process limit preference. [CHAR LIMIT=35] -->
    <string-array name="app_process_limit_entries">
        <item>Standard limit</item>
        <item>No background processes</item>
        <item>At most 1 process</item>
        <item>At most 2 processes</item>
        <item>At most 3 processes</item>
        <item>At most 4 processes</item>
    </string-array>

    <!-- Values for app process limit preference. -->
    <string-array name="app_process_limit_values" translatable="false" >
        <item>-1</item>
        <item>0</item>
        <item>1</item>
        <item>2</item>
        <item>3</item>
        <item>4</item>
    </string-array>

    <!-- USB configuration names for Developer Settings.
         This can be overridden by devices with additional USB configurations. -->
    <string-array name="usb_configuration_titles">
        <item>Charging</item>
        <item>MTP (Media Transfer Protocol)</item>
        <item>PTP (Picture Transfer Protocol)</item>
        <item>RNDIS (USB Ethernet)</item>
        <item>Audio Source</item>
        <item>MIDI</item>
    </string-array>

    <!-- USB configuration values for Developer Settings.
         These are lists of USB functions passed to the USB Manager to change USB configuraton.
         This can be overridden by devices with additional USB configurations.
         Do not translate. -->
    <string-array name="usb_configuration_values" translatable="false">
        <!-- Do not translate. -->
        <item>none</item>
        <!-- Do not translate. -->
        <item>mtp</item>
        <!-- Do not translate. -->
        <item>ptp</item>
        <!-- Do not translate. -->
        <item>rndis</item>
        <!-- Do not translate. -->
        <item>audio_source</item>
        <!-- Do not translate. -->
        <item>midi</item>
    </string-array>

    <!-- Display color space adjustment modes for developers -->
    <string-array name="simulate_color_space_entries" translatable="false">
        <item>@string/daltonizer_mode_disabled</item>
        <item>@string/daltonizer_mode_monochromacy</item>
        <item>@string/daltonizer_mode_deuteranomaly</item>
        <item>@string/daltonizer_mode_protanomaly</item>
        <item>@string/daltonizer_mode_tritanomaly</item>
    </string-array>

    <!-- Values for display color space adjustment modes for developers -->
    <string-array name="simulate_color_space_values" translatable="false">
        <item>-1</item>
        <item>0</item>
        <item>2</item>
        <item>1</item>
        <item>3</item>
    </string-array>

    <!-- IDs for each color mode. The values must match the corresponding constants in
         android.view.Display -->
    <integer-array name="color_mode_ids">
        <item>0</item>
        <item>-1</item>
        <item>7</item>
    </integer-array>

</resources>