core/java/android/content/ContentProvider.java

/*
 * Copyright (C) 2006 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.content;

import static android.content.pm.PackageManager.PERMISSION_GRANTED;

import android.content.pm.PackageManager;
import android.content.pm.PathPermission;
import android.content.pm.ProviderInfo;
import android.content.res.AssetFileDescriptor;
import android.content.res.Configuration;
import android.database.Cursor;
import android.database.SQLException;
import android.net.Uri;
import android.os.AsyncTask;
import android.os.Binder;
import android.os.Bundle;
import android.os.CancellationSignal;
import android.os.ICancellationSignal;
import android.os.OperationCanceledException;
import android.os.ParcelFileDescriptor;
import android.os.Process;
import android.os.RemoteException;
import android.os.UserHandle;
import android.util.Log;

import java.io.File;
import java.io.FileDescriptor;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.PrintWriter;
import java.util.ArrayList;

/**
 * Content providers are one of the primary building blocks of Android applications, providing
 * content to applications. They encapsulate data and provide it to applications through the single
 * {@link ContentResolver} interface. A content provider is only required if you need to share
 * data between multiple applications. For example, the contacts data is used by multiple
 * applications and must be stored in a content provider. If you don't need to share data amongst
 * multiple applications you can use a database directly via
 * {@link android.database.sqlite.SQLiteDatabase}.
 *
 * <p>When a request is made via
 * a {@link ContentResolver} the system inspects the authority of the given URI and passes the
 * request to the content provider registered with the authority. The content provider can interpret
 * the rest of the URI however it wants. The {@link UriMatcher} class is helpful for parsing
 * URIs.</p>
 *
 * <p>The primary methods that need to be implemented are:
 * <ul>
 *   <li>{@link #onCreate} which is called to initialize the provider</li>
 *   <li>{@link #query} which returns data to the caller</li>
 *   <li>{@link #insert} which inserts new data into the content provider</li>
 *   <li>{@link #update} which updates existing data in the content provider</li>
 *   <li>{@link #delete} which deletes data from the content provider</li>
 *   <li>{@link #getType} which returns the MIME type of data in the content provider</li>
 * </ul></p>
 *
 * <p class="caution">Data access methods (such as {@link #insert} and
 * {@link #update}) may be called from many threads at once, and must be thread-safe.
 * Other methods (such as {@link #onCreate}) are only called from the application
 * main thread, and must avoid performing lengthy operations.  See the method
 * descriptions for their expected thread behavior.</p>
 *
 * <p>Requests to {@link ContentResolver} are automatically forwarded to the appropriate
 * ContentProvider instance, so subclasses don't have to worry about the details of
 * cross-process calls.</p>
 *
 * <div class="special reference">
 * <h3>Developer Guides</h3>
 * <p>For more information about using content providers, read the
 * <a href="{@docRoot}guide/topics/providers/content-providers.html">Content Providers</a>
 * developer guide.</p>
 */
public abstract class ContentProvider implements ComponentCallbacks2 {
    private static final String TAG = "ContentProvider";

    /*
     * Note: if you add methods to ContentProvider, you must add similar methods to
     *       MockContentProvider.
     */

    private Context mContext = null;
    private int mMyUid;
    private String mReadPermission;
    private String mWritePermission;
    private PathPermission[] mPathPermissions;
    private boolean mExported;

    private Transport mTransport = new Transport();

    /**
     * Construct a ContentProvider instance.  Content providers must be
     * <a href="{@docRoot}guide/topics/manifest/provider-element.html">declared
     * in the manifest</a>, accessed with {@link ContentResolver}, and created
     * automatically by the system, so applications usually do not create
     * ContentProvider instances directly.
     *
     * <p>At construction time, the object is uninitialized, and most fields and
     * methods are unavailable.  Subclasses should initialize themselves in
     * {@link #onCreate}, not the constructor.
     *
     * <p>Content providers are created on the application main thread at
     * application launch time.  The constructor must not perform lengthy
     * operations, or application startup will be delayed.
     */
    public ContentProvider() {
    }

    /**
     * Constructor just for mocking.
     *
     * @param context A Context object which should be some mock instance (like the
     * instance of {@link android.test.mock.MockContext}).
     * @param readPermission The read permision you want this instance should have in the
     * test, which is available via {@link #getReadPermission()}.
     * @param writePermission The write permission you want this instance should have
     * in the test, which is available via {@link #getWritePermission()}.
     * @param pathPermissions The PathPermissions you want this instance should have
     * in the test, which is available via {@link #getPathPermissions()}.
     * @hide
     */
    public ContentProvider(
            Context context,
            String readPermission,
            String writePermission,
            PathPermission[] pathPermissions) {
        mContext = context;
        mReadPermission = readPermission;
        mWritePermission = writePermission;
        mPathPermissions = pathPermissions;
    }

    /**
     * Given an IContentProvider, try to coerce it back to the real
     * ContentProvider object if it is running in the local process.  This can
     * be used if you know you are running in the same process as a provider,
     * and want to get direct access to its implementation details.  Most
     * clients should not nor have a reason to use it.
     *
     * @param abstractInterface The ContentProvider interface that is to be
     *              coerced.
     * @return If the IContentProvider is non-null and local, returns its actual
     * ContentProvider instance.  Otherwise returns null.
     * @hide
     */
    public static ContentProvider coerceToLocalContentProvider(
            IContentProvider abstractInterface) {
        if (abstractInterface instanceof Transport) {
            return ((Transport)abstractInterface).getContentProvider();
        }
        return null;
    }

    /**
     * Binder object that deals with remoting.
     *
     * @hide
     */
    class Transport extends ContentProviderNative {
        ContentProvider getContentProvider() {
            return ContentProvider.this;
        }

        @Override
        public String getProviderName() {
            return getContentProvider().getClass().getName();
        }

        @Override
        public Cursor query(Uri uri, String[] projection,
                String selection, String[] selectionArgs, String sortOrder,
                ICancellationSignal cancellationSignal) {
            enforceReadPermission(uri);
            return ContentProvider.this.query(uri, projection, selection, selectionArgs, sortOrder,
                    CancellationSignal.fromTransport(cancellationSignal));
        }

        @Override
        public String getType(Uri uri) {
            return ContentProvider.this.getType(uri);
        }

        @Override
        public Uri insert(Uri uri, ContentValues initialValues) {
            enforceWritePermission(uri);
            return ContentProvider.this.insert(uri, initialValues);
        }

        @Override
        public int bulkInsert(Uri uri, ContentValues[] initialValues) {
            enforceWritePermission(uri);
            return ContentProvider.this.bulkInsert(uri, initialValues);
        }

        @Override
        public ContentProviderResult[] applyBatch(ArrayList<ContentProviderOperation> operations)
                throws OperationApplicationException {
            for (ContentProviderOperation operation : operations) {
                if (operation.isReadOperation()) {
                    enforceReadPermission(operation.getUri());
                }

                if (operation.isWriteOperation()) {
                    enforceWritePermission(operation.getUri());
                }
            }
            return ContentProvider.this.applyBatch(operations);
        }

        @Override
        public int delete(Uri uri, String selection, String[] selectionArgs) {
            enforceWritePermission(uri);
            return ContentProvider.this.delete(uri, selection, selectionArgs);
        }

        @Override
        public int update(Uri uri, ContentValues values, String selection,
                String[] selectionArgs) {
            enforceWritePermission(uri);
            return ContentProvider.this.update(uri, values, selection, selectionArgs);
        }

        @Override
        public ParcelFileDescriptor openFile(Uri uri, String mode)
                throws FileNotFoundException {
            if (mode != null && mode.startsWith("rw")) enforceWritePermission(uri);
            else enforceReadPermission(uri);
            return ContentProvider.this.openFile(uri, mode);
        }

        @Override
        public AssetFileDescriptor openAssetFile(Uri uri, String mode)
                throws FileNotFoundException {
            if (mode != null && mode.startsWith("rw")) enforceWritePermission(uri);
            else enforceReadPermission(uri);
            return ContentProvider.this.openAssetFile(uri, mode);
        }

        @Override
        public Bundle call(String method, String arg, Bundle extras) {
            return ContentProvider.this.call(method, arg, extras);
        }

        @Override
        public String[] getStreamTypes(Uri uri, String mimeTypeFilter) {
            return ContentProvider.this.getStreamTypes(uri, mimeTypeFilter);
        }

        @Override
        public AssetFileDescriptor openTypedAssetFile(Uri uri, String mimeType, Bundle opts)
                throws FileNotFoundException {
            enforceReadPermission(uri);
            return ContentProvider.this.openTypedAssetFile(uri, mimeType, opts);
        }

        @Override
        public ICancellationSignal createCancellationSignal() throws RemoteException {
            return CancellationSignal.createTransport();
        }

        private void enforceReadPermission(Uri uri) throws SecurityException {
            final Context context = getContext();
            final int pid = Binder.getCallingPid();
            final int uid = Binder.getCallingUid();
            String missingPerm = null;

            if (uid == mMyUid) {
                return;
            }

            if (mExported) {
                final String componentPerm = getReadPermission();
                if (componentPerm != null) {
                    if (context.checkPermission(componentPerm, pid, uid) == PERMISSION_GRANTED) {
                        return;
                    } else {
                        missingPerm = componentPerm;
                    }
                }

                // track if unprotected read is allowed; any denied
                // <path-permission> below removes this ability
                boolean allowDefaultRead = (componentPerm == null);

                final PathPermission[] pps = getPathPermissions();
                if (pps != null) {
                    final String path = uri.getPath();
                    for (PathPermission pp : pps) {
                        final String pathPerm = pp.getReadPermission();
                        if (pathPerm != null && pp.match(path)) {
                            if (context.checkPermission(pathPerm, pid, uid) == PERMISSION_GRANTED) {
                                return;
                            } else {
                                // any denied <path-permission> means we lose
                                // default <provider> access.
                                allowDefaultRead = false;
                                missingPerm = pathPerm;
                            }
                        }
                    }
                }

                // if we passed <path-permission> checks above, and no default
                // <provider> permission, then allow access.
                if (allowDefaultRead) return;
            }

            // last chance, check against any uri grants
            if (context.checkUriPermission(uri, pid, uid, Intent.FLAG_GRANT_READ_URI_PERMISSION)
                    == PERMISSION_GRANTED) {
                return;
            }

            final String failReason = mExported
                    ? " requires " + missingPerm + ", or grantUriPermission()"
                    : " requires the provider be exported, or grantUriPermission()";
            throw new SecurityException("Permission Denial: reading "
                    + ContentProvider.this.getClass().getName() + " uri " + uri + " from pid=" + pid
                    + ", uid=" + uid + failReason);
        }

        private void enforceWritePermission(Uri uri) throws SecurityException {
            final Context context = getContext();
            final int pid = Binder.getCallingPid();
            final int uid = Binder.getCallingUid();
            String missingPerm = null;

            if (uid == mMyUid) {
                return;
            }

            if (mExported) {
                final String componentPerm = getWritePermission();
                if (componentPerm != null) {
                    if (context.checkPermission(componentPerm, pid, uid) == PERMISSION_GRANTED) {
                        return;
                    } else {
                        missingPerm = componentPerm;
                    }
                }

                // track if unprotected write is allowed; any denied
                // <path-permission> below removes this ability
                boolean allowDefaultWrite = (componentPerm == null);

                final PathPermission[] pps = getPathPermissions();
                if (pps != null) {
                    final String path = uri.getPath();
                    for (PathPermission pp : pps) {
                        final String pathPerm = pp.getWritePermission();
                        if (pathPerm != null && pp.match(path)) {
                            if (context.checkPermission(pathPerm, pid, uid) == PERMISSION_GRANTED) {
                                return;
                            } else {
                                // any denied <path-permission> means we lose
                                // default <provider> access.
                                allowDefaultWrite = false;
                                missingPerm = pathPerm;
                            }
                        }
                    }
                }

                // if we passed <path-permission> checks above, and no default
                // <provider> permission, then allow access.
                if (allowDefaultWrite) return;
            }

            // last chance, check against any uri grants
            if (context.checkUriPermission(uri, pid, uid, Intent.FLAG_GRANT_WRITE_URI_PERMISSION)
                    == PERMISSION_GRANTED) {
                return;
            }

            final String failReason = mExported
                    ? " requires " + missingPerm + ", or grantUriPermission()"
                    : " requires the provider be exported, or grantUriPermission()";
            throw new SecurityException("Permission Denial: writing "
                    + ContentProvider.this.getClass().getName() + " uri " + uri + " from pid=" + pid
                    + ", uid=" + uid + failReason);
        }
    }

    /**
     * Retrieves the Context this provider is running in.  Only available once
     * {@link #onCreate} has been called -- this will return null in the
     * constructor.
     */
    public final Context getContext() {
        return mContext;
    }

    /**
     * Change the permission required to read data from the content
     * provider.  This is normally set for you from its manifest information
     * when the provider is first created.
     *
     * @param permission Name of the permission required for read-only access.
     */
    protected final void setReadPermission(String permission) {
        mReadPermission = permission;
    }

    /**
     * Return the name of the permission required for read-only access to
     * this content provider.  This method can be called from multiple
     * threads, as described in
     * <a href="{@docRoot}guide/topics/fundamentals/processes-and-threads.html#Threads">Processes
     * and Threads</a>.
     */
    public final String getReadPermission() {
        return mReadPermission;
    }

    /**
     * Change the permission required to read and write data in the content
     * provider.  This is normally set for you from its manifest information
     * when the provider is first created.
     *
     * @param permission Name of the permission required for read/write access.
     */
    protected final void setWritePermission(String permission) {
        mWritePermission = permission;
    }

    /**
     * Return the name of the permission required for read/write access to
     * this content provider.  This method can be called from multiple
     * threads, as described in
     * <a href="{@docRoot}guide/topics/fundamentals/processes-and-threads.html#Threads">Processes
     * and Threads</a>.
     */
    public final String getWritePermission() {
        return mWritePermission;
    }

    /**
     * Change the path-based permission required to read and/or write data in
     * the content provider.  This is normally set for you from its manifest
     * information when the provider is first created.
     *
     * @param permissions Array of path permission descriptions.
     */
    protected final void setPathPermissions(PathPermission[] permissions) {
        mPathPermissions = permissions;
    }

    /**
     * Return the path-based permissions required for read and/or write access to
     * this content provider.  This method can be called from multiple
     * threads, as described in
     * <a href="{@docRoot}guide/topics/fundamentals/processes-and-threads.html#Threads">Processes
     * and Threads</a>.
     */
    public final PathPermission[] getPathPermissions() {
        return mPathPermissions;
    }

    /**
     * Implement this to initialize your content provider on startup.
     * This method is called for all registered content providers on the
     * application main thread at application launch time.  It must not perform
     * lengthy operations, or application startup will be delayed.
     *
     * <p>You should defer nontrivial initialization (such as opening,
     * upgrading, and scanning databases) until the content provider is used
     * (via {@link #query}, {@link #insert}, etc).  Deferred initialization
     * keeps application startup fast, avoids unnecessary work if the provider
     * turns out not to be needed, and stops database errors (such as a full
     * disk) from halting application launch.
     *
     * <p>If you use SQLite, {@link android.database.sqlite.SQLiteOpenHelper}
     * is a helpful utility class that makes it easy to manage databases,
     * and will automatically defer opening until first use.  If you do use
     * SQLiteOpenHelper, make sure to avoid calling
     * {@link android.database.sqlite.SQLiteOpenHelper#getReadableDatabase} or
     * {@link android.database.sqlite.SQLiteOpenHelper#getWritableDatabase}
     * from this method.  (Instead, override
     * {@link android.database.sqlite.SQLiteOpenHelper#onOpen} to initialize the
     * database when it is first opened.)
     *
     * @return true if the provider was successfully loaded, false otherwise
     */
    public abstract boolean onCreate();

    /**
     * {@inheritDoc}
     * This method is always called on the application main thread, and must
     * not perform lengthy operations.
     *
     * <p>The default content provider implementation does nothing.
     * Override this method to take appropriate action.
     * (Content providers do not usually care about things like screen
     * orientation, but may want to know about locale changes.)
     */
    public void onConfigurationChanged(Configuration newConfig) {
    }

    /**
     * {@inheritDoc}
     * This method is always called on the application main thread, and must
     * not perform lengthy operations.
     *
     * <p>The default content provider implementation does nothing.
     * Subclasses may override this method to take appropriate action.
     */
    public void onLowMemory() {
    }

    public void onTrimMemory(int level) {
    }

    /**
     * Implement this to handle query requests from clients.
     * This method can be called from multiple threads, as described in
     * <a href="{@docRoot}guide/topics/fundamentals/processes-and-threads.html#Threads">Processes
     * and Threads</a>.
     * <p>
     * Example client call:<p>
     * <pre>// Request a specific record.
     * Cursor managedCursor = managedQuery(
                ContentUris.withAppendedId(Contacts.People.CONTENT_URI, 2),
                projection,    // Which columns to return.
                null,          // WHERE clause.
                null,          // WHERE clause value substitution
                People.NAME + " ASC");   // Sort order.</pre>
     * Example implementation:<p>
     * <pre>// SQLiteQueryBuilder is a helper class that creates the
        // proper SQL syntax for us.
        SQLiteQueryBuilder qBuilder = new SQLiteQueryBuilder();

        // Set the table we're querying.
        qBuilder.setTables(DATABASE_TABLE_NAME);

        // If the query ends in a specific record number, we're
        // being asked for a specific record, so set the
        // WHERE clause in our query.
        if((URI_MATCHER.match(uri)) == SPECIFIC_MESSAGE){
            qBuilder.appendWhere("_id=" + uri.getPathLeafId());
        }

        // Make the query.
        Cursor c = qBuilder.query(mDb,
                projection,
                selection,
                selectionArgs,
                groupBy,
                having,
                sortOrder);
        c.setNotificationUri(getContext().getContentResolver(), uri);
        return c;</pre>
     *
     * @param uri The URI to query. This will be the full URI sent by the client;
     *      if the client is requesting a specific record, the URI will end in a record number
     *      that the implementation should parse and add to a WHERE or HAVING clause, specifying
     *      that _id value.
     * @param projection The list of columns to put into the cursor. If
     *      null all columns are included.
     * @param selection A selection criteria to apply when filtering rows.
     *      If null then all rows are included.
     * @param selectionArgs You may include ?s in selection, which will be replaced by
     *      the values from selectionArgs, in order that they appear in the selection.
     *      The values will be bound as Strings.
     * @param sortOrder How the rows in the cursor should be sorted.
     *      If null then the provider is free to define the sort order.
     * @return a Cursor or null.
     */
    public abstract Cursor query(Uri uri, String[] projection,
            String selection, String[] selectionArgs, String sortOrder);

    /**
     * Implement this to handle query requests from clients with support for cancellation.
     * This method can be called from multiple threads, as described in
     * <a href="{@docRoot}guide/topics/fundamentals/processes-and-threads.html#Threads">Processes
     * and Threads</a>.
     * <p>
     * Example client call:<p>
     * <pre>// Request a specific record.
     * Cursor managedCursor = managedQuery(
                ContentUris.withAppendedId(Contacts.People.CONTENT_URI, 2),
                projection,    // Which columns to return.
                null,          // WHERE clause.
                null,          // WHERE clause value substitution
                People.NAME + " ASC");   // Sort order.</pre>
     * Example implementation:<p>
     * <pre>// SQLiteQueryBuilder is a helper class that creates the
        // proper SQL syntax for us.
        SQLiteQueryBuilder qBuilder = new SQLiteQueryBuilder();

        // Set the table we're querying.
        qBuilder.setTables(DATABASE_TABLE_NAME);

        // If the query ends in a specific record number, we're
        // being asked for a specific record, so set the
        // WHERE clause in our query.
        if((URI_MATCHER.match(uri)) == SPECIFIC_MESSAGE){
            qBuilder.appendWhere("_id=" + uri.getPathLeafId());
        }

        // Make the query.
        Cursor c = qBuilder.query(mDb,
                projection,
                selection,
                selectionArgs,
                groupBy,
                having,
                sortOrder);
        c.setNotificationUri(getContext().getContentResolver(), uri);
        return c;</pre>
     * <p>
     * If you implement this method then you must also implement the version of
     * {@link #query(Uri, String[], String, String[], String)} that does not take a cancellation
     * signal to ensure correct operation on older versions of the Android Framework in
     * which the cancellation signal overload was not available.
     *
     * @param uri The URI to query. This will be the full URI sent by the client;
     *      if the client is requesting a specific record, the URI will end in a record number
     *      that the implementation should parse and add to a WHERE or HAVING clause, specifying
     *      that _id value.
     * @param projection The list of columns to put into the cursor. If
     *      null all columns are included.
     * @param selection A selection criteria to apply when filtering rows.
     *      If null then all rows are included.
     * @param selectionArgs You may include ?s in selection, which will be replaced by
     *      the values from selectionArgs, in order that they appear in the selection.
     *      The values will be bound as Strings.
     * @param sortOrder How the rows in the cursor should be sorted.
     *      If null then the provider is free to define the sort order.
     * @param cancellationSignal A signal to cancel the operation in progress, or null if none.
     * If the operation is canceled, then {@link OperationCanceledException} will be thrown
     * when the query is executed.
     * @return a Cursor or null.
     */
    public Cursor query(Uri uri, String[] projection,
            String selection, String[] selectionArgs, String sortOrder,
            CancellationSignal cancellationSignal) {
        return query(uri, projection, selection, selectionArgs, sortOrder);
    }

    /**
     * Implement this to handle requests for the MIME type of the data at the
     * given URI.  The returned MIME type should start with
     * <code>vnd.android.cursor.item</code> for a single record,
     * or <code>vnd.android.cursor.dir/</code> for multiple items.
     * This method can be called from multiple threads, as described in
     * <a href="{@docRoot}guide/topics/fundamentals/processes-and-threads.html#Threads">Processes
     * and Threads</a>.
     *
     * <p>Note that there are no permissions needed for an application to
     * access this information; if your content provider requires read and/or
     * write permissions, or is not exported, all applications can still call
     * this method regardless of their access permissions.  This allows them
     * to retrieve the MIME type for a URI when dispatching intents.
     *
     * @param uri the URI to query.
     * @return a MIME type string, or null if there is no type.
     */
    public abstract String getType(Uri uri);

    /**
     * Implement this to handle requests to insert a new row.
     * As a courtesy, call {@link ContentResolver#notifyChange(android.net.Uri ,android.database.ContentObserver) notifyChange()}
     * after inserting.
     * This method can be called from multiple threads, as described in
     * <a href="{@docRoot}guide/topics/fundamentals/processes-and-threads.html#Threads">Processes
     * and Threads</a>.
     * @param uri The content:// URI of the insertion request.
     * @param values A set of column_name/value pairs to add to the database.
     * @return The URI for the newly inserted item.
     */
    public abstract Uri insert(Uri uri, ContentValues values);

    /**
     * Override this to handle requests to insert a set of new rows, or the
     * default implementation will iterate over the values and call
     * {@link #insert} on each of them.
     * As a courtesy, call {@link ContentResolver#notifyChange(android.net.Uri ,android.database.ContentObserver) notifyChange()}
     * after inserting.
     * This method can be called from multiple threads, as described in
     * <a href="{@docRoot}guide/topics/fundamentals/processes-and-threads.html#Threads">Processes
     * and Threads</a>.
     *
     * @param uri The content:// URI of the insertion request.
     * @param values An array of sets of column_name/value pairs to add to the database.
     * @return The number of values that were inserted.
     */
    public int bulkInsert(Uri uri, ContentValues[] values) {
        int numValues = values.length;
        for (int i = 0; i < numValues; i++) {
            insert(uri, values[i]);
        }
        return numValues;
    }

    /**
     * Implement this to handle requests to delete one or more rows.
     * The implementation should apply the selection clause when performing
     * deletion, allowing the operation to affect multiple rows in a directory.
     * As a courtesy, call {@link ContentResolver#notifyChange(android.net.Uri ,android.database.ContentObserver) notifyDelete()}
     * after deleting.
     * This method can be called from multiple threads, as described in
     * <a href="{@docRoot}guide/topics/fundamentals/processes-and-threads.html#Threads">Processes
     * and Threads</a>.
     *
     * <p>The implementation is responsible for parsing out a row ID at the end
     * of the URI, if a specific row is being deleted. That is, the client would
     * pass in <code>content://contacts/people/22</code> and the implementation is
     * responsible for parsing the record number (22) when creating a SQL statement.
     *
     * @param uri The full URI to query, including a row ID (if a specific record is requested).
     * @param selection An optional restriction to apply to rows when deleting.
     * @return The number of rows affected.
     * @throws SQLException
     */
    public abstract int delete(Uri uri, String selection, String[] selectionArgs);

    /**
     * Implement this to handle requests to update one or more rows.
     * The implementation should update all rows matching the selection
     * to set the columns according to the provided values map.
     * As a courtesy, call {@link ContentResolver#notifyChange(android.net.Uri ,android.database.ContentObserver) notifyChange()}
     * after updating.
     * This method can be called from multiple threads, as described in
     * <a href="{@docRoot}guide/topics/fundamentals/processes-and-threads.html#Threads">Processes
     * and Threads</a>.
     *
     * @param uri The URI to query. This can potentially have a record ID if this
     * is an update request for a specific record.
     * @param values A Bundle mapping from column names to new column values (NULL is a
     *               valid value).
     * @param selection An optional filter to match rows to update.
     * @return the number of rows affected.
     */
    public abstract int update(Uri uri, ContentValues values, String selection,
            String[] selectionArgs);

    /**
     * Override this to handle requests to open a file blob.
     * The default implementation always throws {@link FileNotFoundException}.
     * This method can be called from multiple threads, as described in
     * <a href="{@docRoot}guide/topics/fundamentals/processes-and-threads.html#Threads">Processes
     * and Threads</a>.
     *
     * <p>This method returns a ParcelFileDescriptor, which is returned directly
     * to the caller.  This way large data (such as images and documents) can be
     * returned without copying the content.
     *
     * <p>The returned ParcelFileDescriptor is owned by the caller, so it is
     * their responsibility to close it when done.  That is, the implementation
     * of this method should create a new ParcelFileDescriptor for each call.
     *
     * @param uri The URI whose file is to be opened.
     * @param mode Access mode for the file.  May be "r" for read-only access,
     * "rw" for read and write access, or "rwt" for read and write access
     * that truncates any existing file.
     *
     * @return Returns a new ParcelFileDescriptor which you can use to access
     * the file.
     *
     * @throws FileNotFoundException Throws FileNotFoundException if there is
     * no file associated with the given URI or the mode is invalid.
     * @throws SecurityException Throws SecurityException if the caller does
     * not have permission to access the file.
     *
     * @see #openAssetFile(Uri, String)
     * @see #openFileHelper(Uri, String)
     */
    public ParcelFileDescriptor openFile(Uri uri, String mode)
            throws FileNotFoundException {
        throw new FileNotFoundException("No files supported by provider at "
                + uri);
    }

    /**
     * This is like {@link #openFile}, but can be implemented by providers
     * that need to be able to return sub-sections of files, often assets
     * inside of their .apk.
     * This method can be called from multiple threads, as described in
     * <a href="{@docRoot}guide/topics/fundamentals/processes-and-threads.html#Threads">Processes
     * and Threads</a>.
     *
     * <p>If you implement this, your clients must be able to deal with such
     * file slices, either directly with
     * {@link ContentResolver#openAssetFileDescriptor}, or by using the higher-level
     * {@link ContentResolver#openInputStream ContentResolver.openInputStream}
     * or {@link ContentResolver#openOutputStream ContentResolver.openOutputStream}
     * methods.
     *
     * <p class="note">If you are implementing this to return a full file, you
     * should create the AssetFileDescriptor with
     * {@link AssetFileDescriptor#UNKNOWN_LENGTH} to be compatible with
     * applications that can not handle sub-sections of files.</p>
     *
     * @param uri The URI whose file is to be opened.
     * @param mode Access mode for the file.  May be "r" for read-only access,
     * "w" for write-only access (erasing whatever data is currently in
     * the file), "wa" for write-only access to append to any existing data,
     * "rw" for read and write access on any existing data, and "rwt" for read
     * and write access that truncates any existing file.
     *
     * @return Returns a new AssetFileDescriptor which you can use to access
     * the file.
     *
     * @throws FileNotFoundException Throws FileNotFoundException if there is
     * no file associated with the given URI or the mode is invalid.
     * @throws SecurityException Throws SecurityException if the caller does
     * not have permission to access the file.
     * 
     * @see #openFile(Uri, String)
     * @see #openFileHelper(Uri, String)
     */
    public AssetFileDescriptor openAssetFile(Uri uri, String mode)
            throws FileNotFoundException {
        ParcelFileDescriptor fd = openFile(uri, mode);
        return fd != null ? new AssetFileDescriptor(fd, 0, -1) : null;
    }

    /**
     * Convenience for subclasses that wish to implement {@link #openFile}
     * by looking up a column named "_data" at the given URI.
     *
     * @param uri The URI to be opened.
     * @param mode The file mode.  May be "r" for read-only access,
     * "w" for write-only access (erasing whatever data is currently in
     * the file), "wa" for write-only access to append to any existing data,
     * "rw" for read and write access on any existing data, and "rwt" for read
     * and write access that truncates any existing file.
     *
     * @return Returns a new ParcelFileDescriptor that can be used by the
     * client to access the file.
     */
    protected final ParcelFileDescriptor openFileHelper(Uri uri,
            String mode) throws FileNotFoundException {
        Cursor c = query(uri, new String[]{"_data"}, null, null, null);
        int count = (c != null) ? c.getCount() : 0;
        if (count != 1) {
            // If there is not exactly one result, throw an appropriate
            // exception.
            if (c != null) {
                c.close();
            }
            if (count == 0) {
                throw new FileNotFoundException("No entry for " + uri);
            }
            throw new FileNotFoundException("Multiple items at " + uri);
        }

        c.moveToFirst();
        int i = c.getColumnIndex("_data");
        String path = (i >= 0 ? c.getString(i) : null);
        c.close();
        if (path == null) {
            throw new FileNotFoundException("Column _data not found.");
        }

        int modeBits = ContentResolver.modeToMode(uri, mode);
        return ParcelFileDescriptor.open(new File(path), modeBits);
    }

    /**
     * Called by a client to determine the types of data streams that this
     * content provider supports for the given URI.  The default implementation
     * returns null, meaning no types.  If your content provider stores data
     * of a particular type, return that MIME type if it matches the given
     * mimeTypeFilter.  If it can perform type conversions, return an array
     * of all supported MIME types that match mimeTypeFilter.
     *
     * @param uri The data in the content provider being queried.
     * @param mimeTypeFilter The type of data the client desires.  May be
     * a pattern, such as *\/* to retrieve all possible data types.
     * @return Returns null if there are no possible data streams for the
     * given mimeTypeFilter.  Otherwise returns an array of all available
     * concrete MIME types.
     *
     * @see #getType(Uri)
     * @see #openTypedAssetFile(Uri, String, Bundle)
     * @see ClipDescription#compareMimeTypes(String, String)
     */
    public String[] getStreamTypes(Uri uri, String mimeTypeFilter) {
        return null;
    }

    /**
     * Called by a client to open a read-only stream containing data of a
     * particular MIME type.  This is like {@link #openAssetFile(Uri, String)},
     * except the file can only be read-only and the content provider may
     * perform data conversions to generate data of the desired type.
     *
     * <p>The default implementation compares the given mimeType against the
     * result of {@link #getType(Uri)} and, if the match, simple calls
     * {@link #openAssetFile(Uri, String)}.
     *
     * <p>See {@link ClipData} for examples of the use and implementation
     * of this method.
     *
     * @param uri The data in the content provider being queried.
     * @param mimeTypeFilter The type of data the client desires.  May be
     * a pattern, such as *\/*, if the caller does not have specific type
     * requirements; in this case the content provider will pick its best
     * type matching the pattern.
     * @param opts Additional options from the client.  The definitions of
     * these are specific to the content provider being called.
     *
     * @return Returns a new AssetFileDescriptor from which the client can
     * read data of the desired type.
     *
     * @throws FileNotFoundException Throws FileNotFoundException if there is
     * no file associated with the given URI or the mode is invalid.
     * @throws SecurityException Throws SecurityException if the caller does
     * not have permission to access the data.
     * @throws IllegalArgumentException Throws IllegalArgumentException if the
     * content provider does not support the requested MIME type.
     *
     * @see #getStreamTypes(Uri, String)
     * @see #openAssetFile(Uri, String)
     * @see ClipDescription#compareMimeTypes(String, String)
     */
    public AssetFileDescriptor openTypedAssetFile(Uri uri, String mimeTypeFilter, Bundle opts)
            throws FileNotFoundException {
        if ("*/*".equals(mimeTypeFilter)) {
            // If they can take anything, the untyped open call is good enough.
            return openAssetFile(uri, "r");
        }
        String baseType = getType(uri);
        if (baseType != null && ClipDescription.compareMimeTypes(baseType, mimeTypeFilter)) {
            // Use old untyped open call if this provider has a type for this
            // URI and it matches the request.
            return openAssetFile(uri, "r");
        }
        throw new FileNotFoundException("Can't open " + uri + " as type " + mimeTypeFilter);
    }

    /**
     * Interface to write a stream of data to a pipe.  Use with
     * {@link ContentProvider#openPipeHelper}.
     */
    public interface PipeDataWriter<T> {
        /**
         * Called from a background thread to stream data out to a pipe.
         * Note that the pipe is blocking, so this thread can block on
         * writes for an arbitrary amount of time if the client is slow
         * at reading.
         *
         * @param output The pipe where data should be written.  This will be
         * closed for you upon returning from this function.
         * @param uri The URI whose data is to be written.
         * @param mimeType The desired type of data to be written.
         * @param opts Options supplied by caller.
         * @param args Your own custom arguments.
         */
        public void writeDataToPipe(ParcelFileDescriptor output, Uri uri, String mimeType,
                Bundle opts, T args);
    }

    /**
     * A helper function for implementing {@link #openTypedAssetFile}, for
     * creating a data pipe and background thread allowing you to stream
     * generated data back to the client.  This function returns a new
     * ParcelFileDescriptor that should be returned to the caller (the caller
     * is responsible for closing it).
     *
     * @param uri The URI whose data is to be written.
     * @param mimeType The desired type of data to be written.
     * @param opts Options supplied by caller.
     * @param args Your own custom arguments.
     * @param func Interface implementing the function that will actually
     * stream the data.
     * @return Returns a new ParcelFileDescriptor holding the read side of
     * the pipe.  This should be returned to the caller for reading; the caller
     * is responsible for closing it when done.
     */
    public <T> ParcelFileDescriptor openPipeHelper(final Uri uri, final String mimeType,
            final Bundle opts, final T args, final PipeDataWriter<T> func)
            throws FileNotFoundException {
        try {
            final ParcelFileDescriptor[] fds = ParcelFileDescriptor.createPipe();

            AsyncTask<Object, Object, Object> task = new AsyncTask<Object, Object, Object>() {
                @Override
                protected Object doInBackground(Object... params) {
                    func.writeDataToPipe(fds[1], uri, mimeType, opts, args);
                    try {
                        fds[1].close();
                    } catch (IOException e) {
                        Log.w(TAG, "Failure closing pipe", e);
                    }
                    return null;
                }
            };
            task.executeOnExecutor(AsyncTask.THREAD_POOL_EXECUTOR, (Object[])null);

            return fds[0];
        } catch (IOException e) {
            throw new FileNotFoundException("failure making pipe");
        }
    }

    /**
     * Returns true if this instance is a temporary content provider.
     * @return true if this instance is a temporary content provider
     */
    protected boolean isTemporary() {
        return false;
    }

    /**
     * Returns the Binder object for this provider.
     *
     * @return the Binder object for this provider
     * @hide
     */
    public IContentProvider getIContentProvider() {
        return mTransport;
    }

    /**
     * After being instantiated, this is called to tell the content provider
     * about itself.
     *
     * @param context The context this provider is running in
     * @param info Registered information about this content provider
     */
    public void attachInfo(Context context, ProviderInfo info) {
        /*
         * We may be using AsyncTask from binder threads.  Make it init here
         * so its static handler is on the main thread.
         */
        AsyncTask.init();

        /*
         * Only allow it to be set once, so after the content service gives
         * this to us clients can't change it.
         */
        if (mContext == null) {
            mContext = context;
            mMyUid = Process.myUid();
            if (info != null) {
                setReadPermission(info.readPermission);
                setWritePermission(info.writePermission);
                setPathPermissions(info.pathPermissions);
                mExported = info.exported;
            }
            ContentProvider.this.onCreate();
        }
    }

    /**
     * Override this to handle requests to perform a batch of operations, or the
     * default implementation will iterate over the operations and call
     * {@link ContentProviderOperation#apply} on each of them.
     * If all calls to {@link ContentProviderOperation#apply} succeed
     * then a {@link ContentProviderResult} array with as many
     * elements as there were operations will be returned.  If any of the calls
     * fail, it is up to the implementation how many of the others take effect.
     * This method can be called from multiple threads, as described in
     * <a href="{@docRoot}guide/topics/fundamentals/processes-and-threads.html#Threads">Processes
     * and Threads</a>.
     *
     * @param operations the operations to apply
     * @return the results of the applications
     * @throws OperationApplicationException thrown if any operation fails.
     * @see ContentProviderOperation#apply
     */
    public ContentProviderResult[] applyBatch(ArrayList<ContentProviderOperation> operations)
            throws OperationApplicationException {
        final int numOperations = operations.size();
        final ContentProviderResult[] results = new ContentProviderResult[numOperations];
        for (int i = 0; i < numOperations; i++) {
            results[i] = operations.get(i).apply(this, results, i);
        }
        return results;
    }

    /**
     * Call a provider-defined method.  This can be used to implement
     * interfaces that are cheaper and/or unnatural for a table-like
     * model.
     *
     * @param method method name to call.  Opaque to framework, but should not be null.
     * @param arg provider-defined String argument.  May be null.
     * @param extras provider-defined Bundle argument.  May be null.
     * @return provider-defined return value.  May be null.  Null is also
     *   the default for providers which don't implement any call methods.
     */
    public Bundle call(String method, String arg, Bundle extras) {
        return null;
    }

    /**
     * Implement this to shut down the ContentProvider instance. You can then
     * invoke this method in unit tests.
     * 
     * <p>
     * Android normally handles ContentProvider startup and shutdown
     * automatically. You do not need to start up or shut down a
     * ContentProvider. When you invoke a test method on a ContentProvider,
     * however, a ContentProvider instance is started and keeps running after
     * the test finishes, even if a succeeding test instantiates another
     * ContentProvider. A conflict develops because the two instances are
     * usually running against the same underlying data source (for example, an
     * sqlite database).
     * </p>
     * <p>
     * Implementing shutDown() avoids this conflict by providing a way to
     * terminate the ContentProvider. This method can also prevent memory leaks
     * from multiple instantiations of the ContentProvider, and it can ensure
     * unit test isolation by allowing you to completely clean up the test
     * fixture before moving on to the next test.
     * </p>
     */
    public void shutdown() {
        Log.w(TAG, "implement ContentProvider shutdown() to make sure all database " +
                "connections are gracefully shutdown");
    }

    /**
     * Print the Provider's state into the given stream.  This gets invoked if
     * you run "adb shell dumpsys activity provider &lt;provider_component_name&gt;".
     *
     * @param prefix Desired prefix to prepend at each line of output.
     * @param fd The raw file descriptor that the dump is being sent to.
     * @param writer The PrintWriter to which you should dump your state.  This will be
     * closed for you after you return.
     * @param args additional arguments to the dump request.
     * @hide
     */
    public void dump(FileDescriptor fd, PrintWriter writer, String[] args) {
        writer.println("nothing to dump");
    }
}