| /* |
| * Copyright 2018 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #if defined(__clang__) |
| #pragma clang diagnostic push |
| #pragma clang diagnostic ignored "-Weverything" |
| #endif |
| |
| // The following headers are included without checking every warning. |
| // TODO(b/72172820): Remove the workaround once we have enforced -Weverything |
| // in these headers and their dependencies. |
| #include <dvr/dvr_api.h> |
| #include <gui/BufferHubProducer.h> |
| |
| #if defined(__clang__) |
| #pragma clang diagnostic pop |
| #endif |
| |
| #include <inttypes.h> |
| #include <log/log.h> |
| #include <system/window.h> |
| |
| namespace android { |
| |
| /* static */ |
| sp<BufferHubProducer> BufferHubProducer::Create(const std::shared_ptr<dvr::ProducerQueue>& queue) { |
| if (queue->metadata_size() != sizeof(DvrNativeBufferMetadata)) { |
| ALOGE("BufferHubProducer::Create producer's metadata size is different " |
| "than the size of DvrNativeBufferMetadata"); |
| return nullptr; |
| } |
| |
| sp<BufferHubProducer> producer = new BufferHubProducer; |
| producer->queue_ = queue; |
| return producer; |
| } |
| |
| /* static */ |
| sp<BufferHubProducer> BufferHubProducer::Create(dvr::ProducerQueueParcelable parcelable) { |
| if (!parcelable.IsValid()) { |
| ALOGE("BufferHubProducer::Create: Invalid producer parcelable."); |
| return nullptr; |
| } |
| |
| sp<BufferHubProducer> producer = new BufferHubProducer; |
| producer->queue_ = dvr::ProducerQueue::Import(parcelable.TakeChannelHandle()); |
| return producer; |
| } |
| |
| status_t BufferHubProducer::requestBuffer(int slot, sp<GraphicBuffer>* buf) { |
| ALOGV("requestBuffer: slot=%d", slot); |
| |
| std::unique_lock<std::mutex> lock(mutex_); |
| |
| if (connected_api_ == kNoConnectedApi) { |
| ALOGE("requestBuffer: BufferHubProducer has no connected producer"); |
| return NO_INIT; |
| } |
| |
| if (slot < 0 || slot >= max_buffer_count_) { |
| ALOGE("requestBuffer: slot index %d out of range [0, %d)", slot, max_buffer_count_); |
| return BAD_VALUE; |
| } else if (!buffers_[slot].mBufferState.isDequeued()) { |
| ALOGE("requestBuffer: slot %d is not owned by the producer (state = %s)", slot, |
| buffers_[slot].mBufferState.string()); |
| return BAD_VALUE; |
| } else if (buffers_[slot].mGraphicBuffer != nullptr) { |
| ALOGE("requestBuffer: slot %d is not empty.", slot); |
| return BAD_VALUE; |
| } else if (buffers_[slot].mBufferProducer == nullptr) { |
| ALOGE("requestBuffer: slot %d is not dequeued.", slot); |
| return BAD_VALUE; |
| } |
| |
| const auto& buffer_producer = buffers_[slot].mBufferProducer; |
| sp<GraphicBuffer> graphic_buffer = buffer_producer->buffer()->buffer(); |
| |
| buffers_[slot].mGraphicBuffer = graphic_buffer; |
| buffers_[slot].mRequestBufferCalled = true; |
| |
| *buf = graphic_buffer; |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::setMaxDequeuedBufferCount(int max_dequeued_buffers) { |
| ALOGV("setMaxDequeuedBufferCount: max_dequeued_buffers=%d", max_dequeued_buffers); |
| |
| std::unique_lock<std::mutex> lock(mutex_); |
| |
| if (max_dequeued_buffers <= 0 || |
| max_dequeued_buffers > |
| int(dvr::BufferHubQueue::kMaxQueueCapacity - kDefaultUndequeuedBuffers)) { |
| ALOGE("setMaxDequeuedBufferCount: %d out of range (0, %zu]", max_dequeued_buffers, |
| dvr::BufferHubQueue::kMaxQueueCapacity); |
| return BAD_VALUE; |
| } |
| |
| // The new dequeued_buffers count should not be violated by the number |
| // of currently dequeued buffers. |
| int dequeued_count = 0; |
| for (const auto& buf : buffers_) { |
| if (buf.mBufferState.isDequeued()) { |
| dequeued_count++; |
| } |
| } |
| if (dequeued_count > max_dequeued_buffers) { |
| ALOGE("setMaxDequeuedBufferCount: the requested dequeued_buffers" |
| "count (%d) exceeds the current dequeued buffer count (%d)", |
| max_dequeued_buffers, dequeued_count); |
| return BAD_VALUE; |
| } |
| |
| max_dequeued_buffer_count_ = max_dequeued_buffers; |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::setAsyncMode(bool async) { |
| if (async) { |
| // TODO(b/36724099) BufferHubQueue's consumer end always acquires the buffer |
| // automatically and behaves differently from IGraphicBufferConsumer. Thus, |
| // android::BufferQueue's async mode (a.k.a. allocating an additional buffer |
| // to prevent dequeueBuffer from being blocking) technically does not apply |
| // here. |
| // |
| // In Daydream, non-blocking producer side dequeue is guaranteed by careful |
| // buffer consumer implementations. In another word, BufferHubQueue based |
| // dequeueBuffer should never block whether setAsyncMode(true) is set or |
| // not. |
| // |
| // See: IGraphicBufferProducer::setAsyncMode and |
| // BufferQueueProducer::setAsyncMode for more about original implementation. |
| ALOGW("BufferHubProducer::setAsyncMode: BufferHubQueue should always be " |
| "asynchronous. This call makes no effact."); |
| return NO_ERROR; |
| } |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::dequeueBuffer(int* out_slot, sp<Fence>* out_fence, uint32_t width, |
| uint32_t height, PixelFormat format, uint64_t usage, |
| uint64_t* /*outBufferAge*/, |
| FrameEventHistoryDelta* /* out_timestamps */) { |
| ALOGV("dequeueBuffer: w=%u, h=%u, format=%d, usage=%" PRIu64, width, height, format, usage); |
| |
| status_t ret; |
| std::unique_lock<std::mutex> lock(mutex_); |
| |
| if (connected_api_ == kNoConnectedApi) { |
| ALOGE("dequeueBuffer: BufferQueue has no connected producer"); |
| return NO_INIT; |
| } |
| |
| const uint32_t kLayerCount = 1; |
| if (int32_t(queue_->capacity()) < max_dequeued_buffer_count_ + kDefaultUndequeuedBuffers) { |
| // Lazy allocation. When the capacity of |queue_| has not reached |
| // |max_dequeued_buffer_count_|, allocate new buffer. |
| // TODO(jwcai) To save memory, the really reasonable thing to do is to go |
| // over existing slots and find first existing one to dequeue. |
| ret = AllocateBuffer(width, height, kLayerCount, format, usage); |
| if (ret < 0) return ret; |
| } |
| |
| size_t slot = 0; |
| std::shared_ptr<dvr::BufferProducer> buffer_producer; |
| |
| for (size_t retry = 0; retry < dvr::BufferHubQueue::kMaxQueueCapacity; retry++) { |
| LocalHandle fence; |
| auto buffer_status = queue_->Dequeue(dequeue_timeout_ms_, &slot, &fence); |
| if (!buffer_status) return NO_MEMORY; |
| |
| buffer_producer = buffer_status.take(); |
| if (!buffer_producer) return NO_MEMORY; |
| |
| if (width == buffer_producer->width() && height == buffer_producer->height() && |
| uint32_t(format) == buffer_producer->format()) { |
| // The producer queue returns a buffer producer matches the request. |
| break; |
| } |
| |
| // Needs reallocation. |
| // TODO(jwcai) Consider use VLOG instead if we find this log is not useful. |
| ALOGI("dequeueBuffer: requested buffer (w=%u, h=%u, format=%u) is different " |
| "from the buffer returned at slot: %zu (w=%u, h=%u, format=%u). Need " |
| "re-allocattion.", |
| width, height, format, slot, buffer_producer->width(), buffer_producer->height(), |
| buffer_producer->format()); |
| // Mark the slot as reallocating, so that later we can set |
| // BUFFER_NEEDS_REALLOCATION when the buffer actually get dequeued. |
| buffers_[slot].mIsReallocating = true; |
| |
| // Remove the old buffer once the allocation before allocating its |
| // replacement. |
| RemoveBuffer(slot); |
| |
| // Allocate a new producer buffer with new buffer configs. Note that if |
| // there are already multiple buffers in the queue, the next one returned |
| // from |queue_->Dequeue| may not be the new buffer we just reallocated. |
| // Retry up to BufferHubQueue::kMaxQueueCapacity times. |
| ret = AllocateBuffer(width, height, kLayerCount, format, usage); |
| if (ret < 0) return ret; |
| } |
| |
| // With the BufferHub backed solution. Buffer slot returned from |
| // |queue_->Dequeue| is guaranteed to avaiable for producer's use. |
| // It's either in free state (if the buffer has never been used before) or |
| // in queued state (if the buffer has been dequeued and queued back to |
| // BufferHubQueue). |
| LOG_ALWAYS_FATAL_IF((!buffers_[slot].mBufferState.isFree() && |
| !buffers_[slot].mBufferState.isQueued()), |
| "dequeueBuffer: slot %zu is not free or queued, actual state: %s.", slot, |
| buffers_[slot].mBufferState.string()); |
| |
| buffers_[slot].mBufferState.freeQueued(); |
| buffers_[slot].mBufferState.dequeue(); |
| ALOGV("dequeueBuffer: slot=%zu", slot); |
| |
| // TODO(jwcai) Handle fence properly. |BufferHub| has full fence support, we |
| // just need to exopose that through |BufferHubQueue| once we need fence. |
| *out_fence = Fence::NO_FENCE; |
| *out_slot = int(slot); |
| ret = NO_ERROR; |
| |
| if (buffers_[slot].mIsReallocating) { |
| ret |= BUFFER_NEEDS_REALLOCATION; |
| buffers_[slot].mIsReallocating = false; |
| } |
| |
| return ret; |
| } |
| |
| status_t BufferHubProducer::detachBuffer(int /* slot */) { |
| ALOGE("BufferHubProducer::detachBuffer not implemented."); |
| return INVALID_OPERATION; |
| } |
| |
| status_t BufferHubProducer::detachNextBuffer(sp<GraphicBuffer>* /* out_buffer */, |
| sp<Fence>* /* out_fence */) { |
| ALOGE("BufferHubProducer::detachNextBuffer not implemented."); |
| return INVALID_OPERATION; |
| } |
| |
| status_t BufferHubProducer::attachBuffer(int* /* out_slot */, |
| const sp<GraphicBuffer>& /* buffer */) { |
| // With this BufferHub backed implementation, we assume (for now) all buffers |
| // are allocated and owned by the BufferHub. Thus the attempt of transfering |
| // ownership of a buffer to the buffer queue is intentionally unsupported. |
| LOG_ALWAYS_FATAL("BufferHubProducer::attachBuffer not supported."); |
| return INVALID_OPERATION; |
| } |
| |
| status_t BufferHubProducer::queueBuffer(int slot, const QueueBufferInput& input, |
| QueueBufferOutput* output) { |
| ALOGV("queueBuffer: slot %d", slot); |
| |
| if (output == nullptr) { |
| return BAD_VALUE; |
| } |
| |
| int64_t timestamp; |
| bool is_auto_timestamp; |
| android_dataspace dataspace; |
| Rect crop(Rect::EMPTY_RECT); |
| int scaling_mode; |
| uint32_t transform; |
| sp<Fence> fence; |
| |
| input.deflate(×tamp, &is_auto_timestamp, &dataspace, &crop, &scaling_mode, &transform, |
| &fence); |
| |
| // Check input scaling mode is valid. |
| switch (scaling_mode) { |
| case NATIVE_WINDOW_SCALING_MODE_FREEZE: |
| case NATIVE_WINDOW_SCALING_MODE_SCALE_TO_WINDOW: |
| case NATIVE_WINDOW_SCALING_MODE_SCALE_CROP: |
| case NATIVE_WINDOW_SCALING_MODE_NO_SCALE_CROP: |
| break; |
| default: |
| ALOGE("queueBuffer: unknown scaling mode %d", scaling_mode); |
| return BAD_VALUE; |
| } |
| |
| // Check input fence is valid. |
| if (fence == nullptr) { |
| ALOGE("queueBuffer: fence is NULL"); |
| return BAD_VALUE; |
| } |
| |
| std::unique_lock<std::mutex> lock(mutex_); |
| |
| if (connected_api_ == kNoConnectedApi) { |
| ALOGE("queueBuffer: BufferQueue has no connected producer"); |
| return NO_INIT; |
| } |
| |
| if (slot < 0 || slot >= max_buffer_count_) { |
| ALOGE("queueBuffer: slot index %d out of range [0, %d)", slot, max_buffer_count_); |
| return BAD_VALUE; |
| } else if (!buffers_[slot].mBufferState.isDequeued()) { |
| ALOGE("queueBuffer: slot %d is not owned by the producer (state = %s)", slot, |
| buffers_[slot].mBufferState.string()); |
| return BAD_VALUE; |
| } else if ((!buffers_[slot].mRequestBufferCalled || buffers_[slot].mGraphicBuffer == nullptr)) { |
| ALOGE("queueBuffer: slot %d is not requested (mRequestBufferCalled=%d, " |
| "mGraphicBuffer=%p)", |
| slot, buffers_[slot].mRequestBufferCalled, buffers_[slot].mGraphicBuffer.get()); |
| return BAD_VALUE; |
| } |
| |
| // Post the buffer producer with timestamp in the metadata. |
| const auto& buffer_producer = buffers_[slot].mBufferProducer; |
| |
| // Check input crop is not out of boundary of current buffer. |
| Rect buffer_rect(buffer_producer->width(), buffer_producer->height()); |
| Rect cropped_rect(Rect::EMPTY_RECT); |
| crop.intersect(buffer_rect, &cropped_rect); |
| if (cropped_rect != crop) { |
| ALOGE("queueBuffer: slot %d has out-of-boundary crop.", slot); |
| return BAD_VALUE; |
| } |
| |
| LocalHandle fence_fd(fence->isValid() ? fence->dup() : -1); |
| |
| DvrNativeBufferMetadata meta_data; |
| meta_data.timestamp = timestamp; |
| meta_data.is_auto_timestamp = int32_t(is_auto_timestamp); |
| meta_data.dataspace = int32_t(dataspace); |
| meta_data.crop_left = crop.left; |
| meta_data.crop_top = crop.top; |
| meta_data.crop_right = crop.right; |
| meta_data.crop_bottom = crop.bottom; |
| meta_data.scaling_mode = int32_t(scaling_mode); |
| meta_data.transform = int32_t(transform); |
| |
| buffer_producer->PostAsync(&meta_data, fence_fd); |
| buffers_[slot].mBufferState.queue(); |
| |
| output->width = buffer_producer->width(); |
| output->height = buffer_producer->height(); |
| output->transformHint = 0; // default value, we don't use it yet. |
| |
| // |numPendingBuffers| counts of the number of buffers that has been enqueued |
| // by the producer but not yet acquired by the consumer. Due to the nature |
| // of BufferHubQueue design, this is hard to trace from the producer's client |
| // side, but it's safe to assume it's zero. |
| output->numPendingBuffers = 0; |
| |
| // Note that we are not setting nextFrameNumber here as it seems to be only |
| // used by surface flinger. See more at b/22802885, ag/791760. |
| output->nextFrameNumber = 0; |
| |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::cancelBuffer(int slot, const sp<Fence>& fence) { |
| ALOGV(__FUNCTION__); |
| |
| std::unique_lock<std::mutex> lock(mutex_); |
| |
| if (connected_api_ == kNoConnectedApi) { |
| ALOGE("cancelBuffer: BufferQueue has no connected producer"); |
| return NO_INIT; |
| } |
| |
| if (slot < 0 || slot >= max_buffer_count_) { |
| ALOGE("cancelBuffer: slot index %d out of range [0, %d)", slot, max_buffer_count_); |
| return BAD_VALUE; |
| } else if (!buffers_[slot].mBufferState.isDequeued()) { |
| ALOGE("cancelBuffer: slot %d is not owned by the producer (state = %s)", slot, |
| buffers_[slot].mBufferState.string()); |
| return BAD_VALUE; |
| } else if (fence == nullptr) { |
| ALOGE("cancelBuffer: fence is NULL"); |
| return BAD_VALUE; |
| } |
| |
| auto buffer_producer = buffers_[slot].mBufferProducer; |
| queue_->Enqueue(buffer_producer, size_t(slot), 0ULL); |
| buffers_[slot].mBufferState.cancel(); |
| buffers_[slot].mFence = fence; |
| ALOGV("cancelBuffer: slot %d", slot); |
| |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::query(int what, int* out_value) { |
| ALOGV(__FUNCTION__); |
| |
| std::unique_lock<std::mutex> lock(mutex_); |
| |
| if (out_value == nullptr) { |
| ALOGE("query: out_value was NULL"); |
| return BAD_VALUE; |
| } |
| |
| int value = 0; |
| switch (what) { |
| case NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS: |
| // TODO(b/36187402) This should be the maximum number of buffers that this |
| // producer queue's consumer can acquire. Set to be at least one. Need to |
| // find a way to set from the consumer side. |
| value = kDefaultUndequeuedBuffers; |
| break; |
| case NATIVE_WINDOW_BUFFER_AGE: |
| value = 0; |
| break; |
| case NATIVE_WINDOW_WIDTH: |
| value = int32_t(queue_->default_width()); |
| break; |
| case NATIVE_WINDOW_HEIGHT: |
| value = int32_t(queue_->default_height()); |
| break; |
| case NATIVE_WINDOW_FORMAT: |
| value = int32_t(queue_->default_format()); |
| break; |
| case NATIVE_WINDOW_CONSUMER_RUNNING_BEHIND: |
| // BufferHubQueue is always operating in async mode, thus semantically |
| // consumer can never be running behind. See BufferQueueCore.cpp core |
| // for more information about the original meaning of this flag. |
| value = 0; |
| break; |
| case NATIVE_WINDOW_CONSUMER_USAGE_BITS: |
| // TODO(jwcai) This is currently not implement as we don't need |
| // IGraphicBufferConsumer parity. |
| value = 0; |
| break; |
| case NATIVE_WINDOW_DEFAULT_DATASPACE: |
| // TODO(jwcai) Return the default value android::BufferQueue is using as |
| // there is no way dvr::ConsumerQueue can set it. |
| value = 0; // HAL_DATASPACE_UNKNOWN |
| break; |
| case NATIVE_WINDOW_STICKY_TRANSFORM: |
| // TODO(jwcai) Return the default value android::BufferQueue is using as |
| // there is no way dvr::ConsumerQueue can set it. |
| value = 0; |
| break; |
| case NATIVE_WINDOW_CONSUMER_IS_PROTECTED: |
| // In Daydream's implementation, the consumer end (i.e. VR Compostior) |
| // knows how to handle protected buffers. |
| value = 1; |
| break; |
| default: |
| return BAD_VALUE; |
| } |
| |
| ALOGV("query: key=%d, v=%d", what, value); |
| *out_value = value; |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::connect(const sp<IProducerListener>& /* listener */, int api, |
| bool /* producer_controlled_by_app */, |
| QueueBufferOutput* output) { |
| // Consumer interaction are actually handled by buffer hub, and we need |
| // to maintain consumer operations here. We only need to perform basic input |
| // parameter checks here. |
| ALOGV(__FUNCTION__); |
| |
| if (output == nullptr) { |
| return BAD_VALUE; |
| } |
| |
| std::unique_lock<std::mutex> lock(mutex_); |
| |
| if (connected_api_ != kNoConnectedApi) { |
| return BAD_VALUE; |
| } |
| |
| if (!queue_->is_connected()) { |
| ALOGE("BufferHubProducer::connect: This BufferHubProducer is not " |
| "connected to bufferhud. Has it been taken out as a parcelable?"); |
| return BAD_VALUE; |
| } |
| |
| switch (api) { |
| case NATIVE_WINDOW_API_EGL: |
| case NATIVE_WINDOW_API_CPU: |
| case NATIVE_WINDOW_API_MEDIA: |
| case NATIVE_WINDOW_API_CAMERA: |
| connected_api_ = api; |
| |
| output->width = queue_->default_width(); |
| output->height = queue_->default_height(); |
| |
| // default values, we don't use them yet. |
| output->transformHint = 0; |
| output->numPendingBuffers = 0; |
| output->nextFrameNumber = 0; |
| output->bufferReplaced = false; |
| |
| break; |
| default: |
| ALOGE("BufferHubProducer::connect: unknow API %d", api); |
| return BAD_VALUE; |
| } |
| |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::disconnect(int api, DisconnectMode /*mode*/) { |
| // Consumer interaction are actually handled by buffer hub, and we need |
| // to maintain consumer operations here. We only need to perform basic input |
| // parameter checks here. |
| ALOGV(__FUNCTION__); |
| |
| std::unique_lock<std::mutex> lock(mutex_); |
| |
| if (kNoConnectedApi == connected_api_) { |
| return NO_INIT; |
| } else if (api != connected_api_) { |
| return BAD_VALUE; |
| } |
| |
| FreeAllBuffers(); |
| connected_api_ = kNoConnectedApi; |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::setSidebandStream(const sp<NativeHandle>& stream) { |
| if (stream != nullptr) { |
| // TODO(jwcai) Investigate how is is used, maybe use BufferHubBuffer's |
| // metadata. |
| ALOGE("SidebandStream is not currently supported."); |
| return INVALID_OPERATION; |
| } |
| return NO_ERROR; |
| } |
| |
| void BufferHubProducer::allocateBuffers(uint32_t /* width */, uint32_t /* height */, |
| PixelFormat /* format */, uint64_t /* usage */) { |
| // TODO(jwcai) |allocateBuffers| aims to preallocate up to the maximum number |
| // of buffers permitted by the current BufferQueue configuration (aka |
| // |max_buffer_count_|). |
| ALOGE("BufferHubProducer::allocateBuffers not implemented."); |
| } |
| |
| status_t BufferHubProducer::allowAllocation(bool /* allow */) { |
| ALOGE("BufferHubProducer::allowAllocation not implemented."); |
| return INVALID_OPERATION; |
| } |
| |
| status_t BufferHubProducer::setGenerationNumber(uint32_t generation_number) { |
| ALOGV(__FUNCTION__); |
| |
| std::unique_lock<std::mutex> lock(mutex_); |
| generation_number_ = generation_number; |
| return NO_ERROR; |
| } |
| |
| String8 BufferHubProducer::getConsumerName() const { |
| // BufferHub based implementation could have one to many producer/consumer |
| // relationship, thus |getConsumerName| from the producer side does not |
| // make any sense. |
| ALOGE("BufferHubProducer::getConsumerName not supported."); |
| return String8("BufferHubQueue::DummyConsumer"); |
| } |
| |
| status_t BufferHubProducer::setSharedBufferMode(bool shared_buffer_mode) { |
| if (shared_buffer_mode) { |
| ALOGE("BufferHubProducer::setSharedBufferMode(true) is not supported."); |
| // TODO(b/36373181) Front buffer mode for buffer hub queue as ANativeWindow. |
| return INVALID_OPERATION; |
| } |
| // Setting to default should just work as a no-op. |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::setAutoRefresh(bool auto_refresh) { |
| if (auto_refresh) { |
| ALOGE("BufferHubProducer::setAutoRefresh(true) is not supported."); |
| return INVALID_OPERATION; |
| } |
| // Setting to default should just work as a no-op. |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::setDequeueTimeout(nsecs_t timeout) { |
| ALOGV(__FUNCTION__); |
| |
| std::unique_lock<std::mutex> lock(mutex_); |
| dequeue_timeout_ms_ = int(timeout / (1000 * 1000)); |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::getLastQueuedBuffer(sp<GraphicBuffer>* /* out_buffer */, |
| sp<Fence>* /* out_fence */, |
| float /*out_transform_matrix*/[16]) { |
| ALOGE("BufferHubProducer::getLastQueuedBuffer not implemented."); |
| return INVALID_OPERATION; |
| } |
| |
| void BufferHubProducer::getFrameTimestamps(FrameEventHistoryDelta* /*outDelta*/) { |
| ALOGE("BufferHubProducer::getFrameTimestamps not implemented."); |
| } |
| |
| status_t BufferHubProducer::getUniqueId(uint64_t* out_id) const { |
| ALOGV(__FUNCTION__); |
| |
| *out_id = unique_id_; |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::getConsumerUsage(uint64_t* out_usage) const { |
| ALOGV(__FUNCTION__); |
| |
| // same value as returned by querying NATIVE_WINDOW_CONSUMER_USAGE_BITS |
| *out_usage = 0; |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::TakeAsParcelable(dvr::ProducerQueueParcelable* out_parcelable) { |
| if (!out_parcelable || out_parcelable->IsValid()) return BAD_VALUE; |
| |
| if (connected_api_ != kNoConnectedApi) { |
| ALOGE("BufferHubProducer::TakeAsParcelable: BufferHubProducer has " |
| "connected client. Must disconnect first."); |
| return BAD_VALUE; |
| } |
| |
| if (!queue_->is_connected()) { |
| ALOGE("BufferHubProducer::TakeAsParcelable: This BufferHubProducer " |
| "is not connected to bufferhud. Has it been taken out as a " |
| "parcelable?"); |
| return BAD_VALUE; |
| } |
| |
| auto status = queue_->TakeAsParcelable(); |
| if (!status) { |
| ALOGE("BufferHubProducer::TakeAsParcelable: Failed to take out " |
| "ProducuerQueueParcelable from the producer queue, error: %s.", |
| status.GetErrorMessage().c_str()); |
| return BAD_VALUE; |
| } |
| |
| *out_parcelable = status.take(); |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::AllocateBuffer(uint32_t width, uint32_t height, uint32_t layer_count, |
| PixelFormat format, uint64_t usage) { |
| auto status = queue_->AllocateBuffer(width, height, layer_count, uint32_t(format), usage); |
| if (!status) { |
| ALOGE("BufferHubProducer::AllocateBuffer: Failed to allocate buffer: %s", |
| status.GetErrorMessage().c_str()); |
| return NO_MEMORY; |
| } |
| |
| size_t slot = status.get(); |
| auto buffer_producer = queue_->GetBuffer(slot); |
| |
| LOG_ALWAYS_FATAL_IF(buffer_producer == nullptr, "Failed to get buffer producer at slot: %zu", |
| slot); |
| |
| buffers_[slot].mBufferProducer = buffer_producer; |
| |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::RemoveBuffer(size_t slot) { |
| auto status = queue_->RemoveBuffer(slot); |
| if (!status) { |
| ALOGE("BufferHubProducer::RemoveBuffer: Failed to remove buffer: %s", |
| status.GetErrorMessage().c_str()); |
| return INVALID_OPERATION; |
| } |
| |
| // Reset in memory objects related the the buffer. |
| buffers_[slot].mBufferProducer = nullptr; |
| buffers_[slot].mGraphicBuffer = nullptr; |
| buffers_[slot].mBufferState.detachProducer(); |
| return NO_ERROR; |
| } |
| |
| status_t BufferHubProducer::FreeAllBuffers() { |
| for (size_t slot = 0; slot < dvr::BufferHubQueue::kMaxQueueCapacity; slot++) { |
| // Reset in memory objects related the the buffer. |
| buffers_[slot].mGraphicBuffer = nullptr; |
| buffers_[slot].mBufferState.reset(); |
| buffers_[slot].mRequestBufferCalled = false; |
| buffers_[slot].mBufferProducer = nullptr; |
| buffers_[slot].mFence = Fence::NO_FENCE; |
| } |
| |
| auto status = queue_->FreeAllBuffers(); |
| if (!status) { |
| ALOGE("BufferHubProducer::FreeAllBuffers: Failed to free all buffers on " |
| "the queue: %s", |
| status.GetErrorMessage().c_str()); |
| } |
| |
| if (queue_->capacity() != 0 || queue_->count() != 0) { |
| LOG_ALWAYS_FATAL("BufferHubProducer::FreeAllBuffers: Not all buffers are freed."); |
| } |
| |
| return NO_ERROR; |
| } |
| |
| } // namespace android |