| /* |
| * Copyright (C) 2013 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define ATRACE_TAG ATRACE_TAG_GRAPHICS |
| //#define LOG_NDEBUG 0 |
| |
| // This is needed for stdint.h to define INT64_MAX in C++ |
| #define __STDC_LIMIT_MACROS |
| |
| #include <math.h> |
| |
| #include <algorithm> |
| |
| #include <log/log.h> |
| #include <utils/String8.h> |
| #include <utils/Thread.h> |
| #include <utils/Trace.h> |
| #include <utils/Vector.h> |
| |
| #include <ui/Fence.h> |
| |
| #include "DispSync.h" |
| #include "EventLog/EventLog.h" |
| |
| using std::max; |
| using std::min; |
| |
| namespace android { |
| |
| // Setting this to true enables verbose tracing that can be used to debug |
| // vsync event model or phase issues. |
| static const bool kTraceDetailedInfo = false; |
| |
| // Setting this to true adds a zero-phase tracer for correlating with hardware |
| // vsync events |
| static const bool kEnableZeroPhaseTracer = false; |
| |
| // This is the threshold used to determine when hardware vsync events are |
| // needed to re-synchronize the software vsync model with the hardware. The |
| // error metric used is the mean of the squared difference between each |
| // present time and the nearest software-predicted vsync. |
| static const nsecs_t kErrorThreshold = 160000000000; // 400 usec squared |
| |
| // This is the offset from the present fence timestamps to the corresponding |
| // vsync event. |
| static const int64_t kPresentTimeOffset = PRESENT_TIME_OFFSET_FROM_VSYNC_NS; |
| |
| #undef LOG_TAG |
| #define LOG_TAG "DispSyncThread" |
| class DispSyncThread: public Thread { |
| public: |
| |
| DispSyncThread(const char* name): |
| mName(name), |
| mStop(false), |
| mPeriod(0), |
| mPhase(0), |
| mReferenceTime(0), |
| mWakeupLatency(0), |
| mFrameNumber(0) {} |
| |
| virtual ~DispSyncThread() {} |
| |
| void updateModel(nsecs_t period, nsecs_t phase, nsecs_t referenceTime) { |
| if (kTraceDetailedInfo) ATRACE_CALL(); |
| Mutex::Autolock lock(mMutex); |
| mPeriod = period; |
| mPhase = phase; |
| mReferenceTime = referenceTime; |
| ALOGV("[%s] updateModel: mPeriod = %" PRId64 ", mPhase = %" PRId64 |
| " mReferenceTime = %" PRId64, mName, ns2us(mPeriod), |
| ns2us(mPhase), ns2us(mReferenceTime)); |
| mCond.signal(); |
| } |
| |
| void stop() { |
| if (kTraceDetailedInfo) ATRACE_CALL(); |
| Mutex::Autolock lock(mMutex); |
| mStop = true; |
| mCond.signal(); |
| } |
| |
| virtual bool threadLoop() { |
| status_t err; |
| nsecs_t now = systemTime(SYSTEM_TIME_MONOTONIC); |
| |
| while (true) { |
| Vector<CallbackInvocation> callbackInvocations; |
| |
| nsecs_t targetTime = 0; |
| |
| { // Scope for lock |
| Mutex::Autolock lock(mMutex); |
| |
| if (kTraceDetailedInfo) { |
| ATRACE_INT64("DispSync:Frame", mFrameNumber); |
| } |
| ALOGV("[%s] Frame %" PRId64, mName, mFrameNumber); |
| ++mFrameNumber; |
| |
| if (mStop) { |
| return false; |
| } |
| |
| if (mPeriod == 0) { |
| err = mCond.wait(mMutex); |
| if (err != NO_ERROR) { |
| ALOGE("error waiting for new events: %s (%d)", |
| strerror(-err), err); |
| return false; |
| } |
| continue; |
| } |
| |
| targetTime = computeNextEventTimeLocked(now); |
| |
| bool isWakeup = false; |
| |
| if (now < targetTime) { |
| if (kTraceDetailedInfo) ATRACE_NAME("DispSync waiting"); |
| |
| if (targetTime == INT64_MAX) { |
| ALOGV("[%s] Waiting forever", mName); |
| err = mCond.wait(mMutex); |
| } else { |
| ALOGV("[%s] Waiting until %" PRId64, mName, |
| ns2us(targetTime)); |
| err = mCond.waitRelative(mMutex, targetTime - now); |
| } |
| |
| if (err == TIMED_OUT) { |
| isWakeup = true; |
| } else if (err != NO_ERROR) { |
| ALOGE("error waiting for next event: %s (%d)", |
| strerror(-err), err); |
| return false; |
| } |
| } |
| |
| now = systemTime(SYSTEM_TIME_MONOTONIC); |
| |
| // Don't correct by more than 1.5 ms |
| static const nsecs_t kMaxWakeupLatency = us2ns(1500); |
| |
| if (isWakeup) { |
| mWakeupLatency = ((mWakeupLatency * 63) + |
| (now - targetTime)) / 64; |
| mWakeupLatency = min(mWakeupLatency, kMaxWakeupLatency); |
| if (kTraceDetailedInfo) { |
| ATRACE_INT64("DispSync:WakeupLat", now - targetTime); |
| ATRACE_INT64("DispSync:AvgWakeupLat", mWakeupLatency); |
| } |
| } |
| |
| callbackInvocations = gatherCallbackInvocationsLocked(now); |
| } |
| |
| if (callbackInvocations.size() > 0) { |
| fireCallbackInvocations(callbackInvocations); |
| } |
| } |
| |
| return false; |
| } |
| |
| status_t addEventListener(const char* name, nsecs_t phase, |
| const sp<DispSync::Callback>& callback) { |
| if (kTraceDetailedInfo) ATRACE_CALL(); |
| Mutex::Autolock lock(mMutex); |
| |
| for (size_t i = 0; i < mEventListeners.size(); i++) { |
| if (mEventListeners[i].mCallback == callback) { |
| return BAD_VALUE; |
| } |
| } |
| |
| EventListener listener; |
| listener.mName = name; |
| listener.mPhase = phase; |
| listener.mCallback = callback; |
| |
| // We want to allow the firstmost future event to fire without |
| // allowing any past events to fire |
| listener.mLastEventTime = systemTime() - mPeriod / 2 + mPhase - |
| mWakeupLatency; |
| |
| mEventListeners.push(listener); |
| |
| mCond.signal(); |
| |
| return NO_ERROR; |
| } |
| |
| status_t removeEventListener(const sp<DispSync::Callback>& callback) { |
| if (kTraceDetailedInfo) ATRACE_CALL(); |
| Mutex::Autolock lock(mMutex); |
| |
| for (size_t i = 0; i < mEventListeners.size(); i++) { |
| if (mEventListeners[i].mCallback == callback) { |
| mEventListeners.removeAt(i); |
| mCond.signal(); |
| return NO_ERROR; |
| } |
| } |
| |
| return BAD_VALUE; |
| } |
| |
| // This method is only here to handle the kIgnorePresentFences case. |
| bool hasAnyEventListeners() { |
| if (kTraceDetailedInfo) ATRACE_CALL(); |
| Mutex::Autolock lock(mMutex); |
| return !mEventListeners.empty(); |
| } |
| |
| private: |
| |
| struct EventListener { |
| const char* mName; |
| nsecs_t mPhase; |
| nsecs_t mLastEventTime; |
| sp<DispSync::Callback> mCallback; |
| }; |
| |
| struct CallbackInvocation { |
| sp<DispSync::Callback> mCallback; |
| nsecs_t mEventTime; |
| }; |
| |
| nsecs_t computeNextEventTimeLocked(nsecs_t now) { |
| if (kTraceDetailedInfo) ATRACE_CALL(); |
| ALOGV("[%s] computeNextEventTimeLocked", mName); |
| nsecs_t nextEventTime = INT64_MAX; |
| for (size_t i = 0; i < mEventListeners.size(); i++) { |
| nsecs_t t = computeListenerNextEventTimeLocked(mEventListeners[i], |
| now); |
| |
| if (t < nextEventTime) { |
| nextEventTime = t; |
| } |
| } |
| |
| ALOGV("[%s] nextEventTime = %" PRId64, mName, ns2us(nextEventTime)); |
| return nextEventTime; |
| } |
| |
| Vector<CallbackInvocation> gatherCallbackInvocationsLocked(nsecs_t now) { |
| if (kTraceDetailedInfo) ATRACE_CALL(); |
| ALOGV("[%s] gatherCallbackInvocationsLocked @ %" PRId64, mName, |
| ns2us(now)); |
| |
| Vector<CallbackInvocation> callbackInvocations; |
| nsecs_t onePeriodAgo = now - mPeriod; |
| |
| for (size_t i = 0; i < mEventListeners.size(); i++) { |
| nsecs_t t = computeListenerNextEventTimeLocked(mEventListeners[i], |
| onePeriodAgo); |
| |
| if (t < now) { |
| CallbackInvocation ci; |
| ci.mCallback = mEventListeners[i].mCallback; |
| ci.mEventTime = t; |
| ALOGV("[%s] [%s] Preparing to fire", mName, |
| mEventListeners[i].mName); |
| callbackInvocations.push(ci); |
| mEventListeners.editItemAt(i).mLastEventTime = t; |
| } |
| } |
| |
| return callbackInvocations; |
| } |
| |
| nsecs_t computeListenerNextEventTimeLocked(const EventListener& listener, |
| nsecs_t baseTime) { |
| if (kTraceDetailedInfo) ATRACE_CALL(); |
| ALOGV("[%s] [%s] computeListenerNextEventTimeLocked(%" PRId64 ")", |
| mName, listener.mName, ns2us(baseTime)); |
| |
| nsecs_t lastEventTime = listener.mLastEventTime + mWakeupLatency; |
| ALOGV("[%s] lastEventTime: %" PRId64, mName, ns2us(lastEventTime)); |
| if (baseTime < lastEventTime) { |
| baseTime = lastEventTime; |
| ALOGV("[%s] Clamping baseTime to lastEventTime -> %" PRId64, mName, |
| ns2us(baseTime)); |
| } |
| |
| baseTime -= mReferenceTime; |
| ALOGV("[%s] Relative baseTime = %" PRId64, mName, ns2us(baseTime)); |
| nsecs_t phase = mPhase + listener.mPhase; |
| ALOGV("[%s] Phase = %" PRId64, mName, ns2us(phase)); |
| baseTime -= phase; |
| ALOGV("[%s] baseTime - phase = %" PRId64, mName, ns2us(baseTime)); |
| |
| // If our previous time is before the reference (because the reference |
| // has since been updated), the division by mPeriod will truncate |
| // towards zero instead of computing the floor. Since in all cases |
| // before the reference we want the next time to be effectively now, we |
| // set baseTime to -mPeriod so that numPeriods will be -1. |
| // When we add 1 and the phase, we will be at the correct event time for |
| // this period. |
| if (baseTime < 0) { |
| ALOGV("[%s] Correcting negative baseTime", mName); |
| baseTime = -mPeriod; |
| } |
| |
| nsecs_t numPeriods = baseTime / mPeriod; |
| ALOGV("[%s] numPeriods = %" PRId64, mName, numPeriods); |
| nsecs_t t = (numPeriods + 1) * mPeriod + phase; |
| ALOGV("[%s] t = %" PRId64, mName, ns2us(t)); |
| t += mReferenceTime; |
| ALOGV("[%s] Absolute t = %" PRId64, mName, ns2us(t)); |
| |
| // Check that it's been slightly more than half a period since the last |
| // event so that we don't accidentally fall into double-rate vsyncs |
| if (t - listener.mLastEventTime < (3 * mPeriod / 5)) { |
| t += mPeriod; |
| ALOGV("[%s] Modifying t -> %" PRId64, mName, ns2us(t)); |
| } |
| |
| t -= mWakeupLatency; |
| ALOGV("[%s] Corrected for wakeup latency -> %" PRId64, mName, ns2us(t)); |
| |
| return t; |
| } |
| |
| void fireCallbackInvocations(const Vector<CallbackInvocation>& callbacks) { |
| if (kTraceDetailedInfo) ATRACE_CALL(); |
| for (size_t i = 0; i < callbacks.size(); i++) { |
| callbacks[i].mCallback->onDispSyncEvent(callbacks[i].mEventTime); |
| } |
| } |
| |
| const char* const mName; |
| |
| bool mStop; |
| |
| nsecs_t mPeriod; |
| nsecs_t mPhase; |
| nsecs_t mReferenceTime; |
| nsecs_t mWakeupLatency; |
| |
| int64_t mFrameNumber; |
| |
| Vector<EventListener> mEventListeners; |
| |
| Mutex mMutex; |
| Condition mCond; |
| }; |
| |
| #undef LOG_TAG |
| #define LOG_TAG "DispSync" |
| |
| class ZeroPhaseTracer : public DispSync::Callback { |
| public: |
| ZeroPhaseTracer() : mParity(false) {} |
| |
| virtual void onDispSyncEvent(nsecs_t /*when*/) { |
| mParity = !mParity; |
| ATRACE_INT("ZERO_PHASE_VSYNC", mParity ? 1 : 0); |
| } |
| |
| private: |
| bool mParity; |
| }; |
| |
| DispSync::DispSync(const char* name) : |
| mName(name), |
| mRefreshSkipCount(0), |
| mThread(new DispSyncThread(name)) { |
| |
| mThread->run("DispSync", PRIORITY_URGENT_DISPLAY + PRIORITY_MORE_FAVORABLE); |
| // set DispSync to SCHED_FIFO to minimize jitter |
| struct sched_param param = {0}; |
| param.sched_priority = 2; |
| if (sched_setscheduler(mThread->getTid(), SCHED_FIFO, ¶m) != 0) { |
| ALOGE("Couldn't set SCHED_FIFO for DispSyncThread"); |
| } |
| |
| |
| reset(); |
| beginResync(); |
| |
| if (kTraceDetailedInfo) { |
| // If we're not getting present fences then the ZeroPhaseTracer |
| // would prevent HW vsync event from ever being turned off. |
| // Even if we're just ignoring the fences, the zero-phase tracing is |
| // not needed because any time there is an event registered we will |
| // turn on the HW vsync events. |
| if (!kIgnorePresentFences && kEnableZeroPhaseTracer) { |
| addEventListener("ZeroPhaseTracer", 0, new ZeroPhaseTracer()); |
| } |
| } |
| } |
| |
| DispSync::~DispSync() {} |
| |
| void DispSync::reset() { |
| Mutex::Autolock lock(mMutex); |
| |
| mPhase = 0; |
| mReferenceTime = 0; |
| mModelUpdated = false; |
| mNumResyncSamples = 0; |
| mFirstResyncSample = 0; |
| mNumResyncSamplesSincePresent = 0; |
| resetErrorLocked(); |
| } |
| |
| bool DispSync::addPresentFence(const sp<Fence>& fence) { |
| Mutex::Autolock lock(mMutex); |
| |
| mPresentFences[mPresentSampleOffset] = fence; |
| mPresentTimes[mPresentSampleOffset] = 0; |
| mPresentSampleOffset = (mPresentSampleOffset + 1) % NUM_PRESENT_SAMPLES; |
| mNumResyncSamplesSincePresent = 0; |
| |
| for (size_t i = 0; i < NUM_PRESENT_SAMPLES; i++) { |
| const sp<Fence>& f(mPresentFences[i]); |
| if (f != NULL) { |
| nsecs_t t = f->getSignalTime(); |
| if (t < INT64_MAX) { |
| mPresentFences[i].clear(); |
| mPresentTimes[i] = t + kPresentTimeOffset; |
| } |
| } |
| } |
| |
| updateErrorLocked(); |
| |
| return !mModelUpdated || mError > kErrorThreshold; |
| } |
| |
| void DispSync::beginResync() { |
| Mutex::Autolock lock(mMutex); |
| ALOGV("[%s] beginResync", mName); |
| mModelUpdated = false; |
| mNumResyncSamples = 0; |
| } |
| |
| bool DispSync::addResyncSample(nsecs_t timestamp) { |
| Mutex::Autolock lock(mMutex); |
| |
| ALOGV("[%s] addResyncSample(%" PRId64 ")", mName, ns2us(timestamp)); |
| |
| size_t idx = (mFirstResyncSample + mNumResyncSamples) % MAX_RESYNC_SAMPLES; |
| mResyncSamples[idx] = timestamp; |
| if (mNumResyncSamples == 0) { |
| mPhase = 0; |
| mReferenceTime = timestamp; |
| ALOGV("[%s] First resync sample: mPeriod = %" PRId64 ", mPhase = 0, " |
| "mReferenceTime = %" PRId64, mName, ns2us(mPeriod), |
| ns2us(mReferenceTime)); |
| mThread->updateModel(mPeriod, mPhase, mReferenceTime); |
| } |
| |
| if (mNumResyncSamples < MAX_RESYNC_SAMPLES) { |
| mNumResyncSamples++; |
| } else { |
| mFirstResyncSample = (mFirstResyncSample + 1) % MAX_RESYNC_SAMPLES; |
| } |
| |
| updateModelLocked(); |
| |
| if (mNumResyncSamplesSincePresent++ > MAX_RESYNC_SAMPLES_WITHOUT_PRESENT) { |
| resetErrorLocked(); |
| } |
| |
| if (kIgnorePresentFences) { |
| // If we don't have the sync framework we will never have |
| // addPresentFence called. This means we have no way to know whether |
| // or not we're synchronized with the HW vsyncs, so we just request |
| // that the HW vsync events be turned on whenever we need to generate |
| // SW vsync events. |
| return mThread->hasAnyEventListeners(); |
| } |
| |
| // Check against kErrorThreshold / 2 to add some hysteresis before having to |
| // resync again |
| bool modelLocked = mModelUpdated && mError < (kErrorThreshold / 2); |
| ALOGV("[%s] addResyncSample returning %s", mName, |
| modelLocked ? "locked" : "unlocked"); |
| return !modelLocked; |
| } |
| |
| void DispSync::endResync() { |
| } |
| |
| status_t DispSync::addEventListener(const char* name, nsecs_t phase, |
| const sp<Callback>& callback) { |
| Mutex::Autolock lock(mMutex); |
| return mThread->addEventListener(name, phase, callback); |
| } |
| |
| void DispSync::setRefreshSkipCount(int count) { |
| Mutex::Autolock lock(mMutex); |
| ALOGD("setRefreshSkipCount(%d)", count); |
| mRefreshSkipCount = count; |
| updateModelLocked(); |
| } |
| |
| status_t DispSync::removeEventListener(const sp<Callback>& callback) { |
| Mutex::Autolock lock(mMutex); |
| return mThread->removeEventListener(callback); |
| } |
| |
| void DispSync::setPeriod(nsecs_t period) { |
| Mutex::Autolock lock(mMutex); |
| mPeriod = period; |
| mPhase = 0; |
| mReferenceTime = 0; |
| mThread->updateModel(mPeriod, mPhase, mReferenceTime); |
| } |
| |
| nsecs_t DispSync::getPeriod() { |
| // lock mutex as mPeriod changes multiple times in updateModelLocked |
| Mutex::Autolock lock(mMutex); |
| return mPeriod; |
| } |
| |
| void DispSync::updateModelLocked() { |
| ALOGV("[%s] updateModelLocked %zu", mName, mNumResyncSamples); |
| if (mNumResyncSamples >= MIN_RESYNC_SAMPLES_FOR_UPDATE) { |
| ALOGV("[%s] Computing...", mName); |
| nsecs_t durationSum = 0; |
| nsecs_t minDuration = INT64_MAX; |
| nsecs_t maxDuration = 0; |
| for (size_t i = 1; i < mNumResyncSamples; i++) { |
| size_t idx = (mFirstResyncSample + i) % MAX_RESYNC_SAMPLES; |
| size_t prev = (idx + MAX_RESYNC_SAMPLES - 1) % MAX_RESYNC_SAMPLES; |
| nsecs_t duration = mResyncSamples[idx] - mResyncSamples[prev]; |
| durationSum += duration; |
| minDuration = min(minDuration, duration); |
| maxDuration = max(maxDuration, duration); |
| } |
| |
| // Exclude the min and max from the average |
| durationSum -= minDuration + maxDuration; |
| mPeriod = durationSum / (mNumResyncSamples - 3); |
| |
| ALOGV("[%s] mPeriod = %" PRId64, mName, ns2us(mPeriod)); |
| |
| double sampleAvgX = 0; |
| double sampleAvgY = 0; |
| double scale = 2.0 * M_PI / double(mPeriod); |
| // Intentionally skip the first sample |
| for (size_t i = 1; i < mNumResyncSamples; i++) { |
| size_t idx = (mFirstResyncSample + i) % MAX_RESYNC_SAMPLES; |
| nsecs_t sample = mResyncSamples[idx] - mReferenceTime; |
| double samplePhase = double(sample % mPeriod) * scale; |
| sampleAvgX += cos(samplePhase); |
| sampleAvgY += sin(samplePhase); |
| } |
| |
| sampleAvgX /= double(mNumResyncSamples - 1); |
| sampleAvgY /= double(mNumResyncSamples - 1); |
| |
| mPhase = nsecs_t(atan2(sampleAvgY, sampleAvgX) / scale); |
| |
| ALOGV("[%s] mPhase = %" PRId64, mName, ns2us(mPhase)); |
| |
| if (mPhase < -(mPeriod / 2)) { |
| mPhase += mPeriod; |
| ALOGV("[%s] Adjusting mPhase -> %" PRId64, mName, ns2us(mPhase)); |
| } |
| |
| if (kTraceDetailedInfo) { |
| ATRACE_INT64("DispSync:Period", mPeriod); |
| ATRACE_INT64("DispSync:Phase", mPhase + mPeriod / 2); |
| } |
| |
| // Artificially inflate the period if requested. |
| mPeriod += mPeriod * mRefreshSkipCount; |
| |
| mThread->updateModel(mPeriod, mPhase, mReferenceTime); |
| mModelUpdated = true; |
| } |
| } |
| |
| void DispSync::updateErrorLocked() { |
| if (!mModelUpdated) { |
| return; |
| } |
| |
| // Need to compare present fences against the un-adjusted refresh period, |
| // since they might arrive between two events. |
| nsecs_t period = mPeriod / (1 + mRefreshSkipCount); |
| |
| int numErrSamples = 0; |
| nsecs_t sqErrSum = 0; |
| |
| for (size_t i = 0; i < NUM_PRESENT_SAMPLES; i++) { |
| nsecs_t sample = mPresentTimes[i] - mReferenceTime; |
| if (sample > mPhase) { |
| nsecs_t sampleErr = (sample - mPhase) % period; |
| if (sampleErr > period / 2) { |
| sampleErr -= period; |
| } |
| sqErrSum += sampleErr * sampleErr; |
| numErrSamples++; |
| } |
| } |
| |
| if (numErrSamples > 0) { |
| mError = sqErrSum / numErrSamples; |
| } else { |
| mError = 0; |
| } |
| |
| if (kTraceDetailedInfo) { |
| ATRACE_INT64("DispSync:Error", mError); |
| } |
| } |
| |
| void DispSync::resetErrorLocked() { |
| mPresentSampleOffset = 0; |
| mError = 0; |
| for (size_t i = 0; i < NUM_PRESENT_SAMPLES; i++) { |
| mPresentFences[i].clear(); |
| mPresentTimes[i] = 0; |
| } |
| } |
| |
| nsecs_t DispSync::computeNextRefresh(int periodOffset) const { |
| Mutex::Autolock lock(mMutex); |
| nsecs_t now = systemTime(SYSTEM_TIME_MONOTONIC); |
| nsecs_t phase = mReferenceTime + mPhase; |
| return (((now - phase) / mPeriod) + periodOffset + 1) * mPeriod + phase; |
| } |
| |
| void DispSync::dump(String8& result) const { |
| Mutex::Autolock lock(mMutex); |
| result.appendFormat("present fences are %s\n", |
| kIgnorePresentFences ? "ignored" : "used"); |
| result.appendFormat("mPeriod: %" PRId64 " ns (%.3f fps; skipCount=%d)\n", |
| mPeriod, 1000000000.0 / mPeriod, mRefreshSkipCount); |
| result.appendFormat("mPhase: %" PRId64 " ns\n", mPhase); |
| result.appendFormat("mError: %" PRId64 " ns (sqrt=%.1f)\n", |
| mError, sqrt(mError)); |
| result.appendFormat("mNumResyncSamplesSincePresent: %d (limit %d)\n", |
| mNumResyncSamplesSincePresent, MAX_RESYNC_SAMPLES_WITHOUT_PRESENT); |
| result.appendFormat("mNumResyncSamples: %zd (max %d)\n", |
| mNumResyncSamples, MAX_RESYNC_SAMPLES); |
| |
| result.appendFormat("mResyncSamples:\n"); |
| nsecs_t previous = -1; |
| for (size_t i = 0; i < mNumResyncSamples; i++) { |
| size_t idx = (mFirstResyncSample + i) % MAX_RESYNC_SAMPLES; |
| nsecs_t sampleTime = mResyncSamples[idx]; |
| if (i == 0) { |
| result.appendFormat(" %" PRId64 "\n", sampleTime); |
| } else { |
| result.appendFormat(" %" PRId64 " (+%" PRId64 ")\n", |
| sampleTime, sampleTime - previous); |
| } |
| previous = sampleTime; |
| } |
| |
| result.appendFormat("mPresentFences / mPresentTimes [%d]:\n", |
| NUM_PRESENT_SAMPLES); |
| nsecs_t now = systemTime(SYSTEM_TIME_MONOTONIC); |
| previous = 0; |
| for (size_t i = 0; i < NUM_PRESENT_SAMPLES; i++) { |
| size_t idx = (i + mPresentSampleOffset) % NUM_PRESENT_SAMPLES; |
| bool signaled = mPresentFences[idx] == NULL; |
| nsecs_t presentTime = mPresentTimes[idx]; |
| if (!signaled) { |
| result.appendFormat(" [unsignaled fence]\n"); |
| } else if (presentTime == 0) { |
| result.appendFormat(" 0\n"); |
| } else if (previous == 0) { |
| result.appendFormat(" %" PRId64 " (%.3f ms ago)\n", presentTime, |
| (now - presentTime) / 1000000.0); |
| } else { |
| result.appendFormat(" %" PRId64 " (+%" PRId64 " / %.3f) (%.3f ms ago)\n", |
| presentTime, presentTime - previous, |
| (presentTime - previous) / (double) mPeriod, |
| (now - presentTime) / 1000000.0); |
| } |
| previous = presentTime; |
| } |
| |
| result.appendFormat("current monotonic time: %" PRId64 "\n", now); |
| } |
| |
| } // namespace android |