| /* |
| * Copyright 2015 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <algorithm> |
| |
| #include <gui/BufferQueue.h> |
| #include <log/log.h> |
| #include <sync/sync.h> |
| #include <utils/StrongPointer.h> |
| |
| #include "driver.h" |
| |
| // TODO(jessehall): Currently we don't have a good error code for when a native |
| // window operation fails. Just returning INITIALIZATION_FAILED for now. Later |
| // versions (post SDK 0.9) of the API/extension have a better error code. |
| // When updating to that version, audit all error returns. |
| namespace vulkan { |
| namespace driver { |
| |
| namespace { |
| |
| const VkSurfaceTransformFlagsKHR kSupportedTransforms = |
| VK_SURFACE_TRANSFORM_IDENTITY_BIT_KHR | |
| VK_SURFACE_TRANSFORM_ROTATE_90_BIT_KHR | |
| VK_SURFACE_TRANSFORM_ROTATE_180_BIT_KHR | |
| VK_SURFACE_TRANSFORM_ROTATE_270_BIT_KHR | |
| // TODO(jessehall): See TODO in TranslateNativeToVulkanTransform. |
| // VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_BIT_KHR | |
| // VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_90_BIT_KHR | |
| // VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_180_BIT_KHR | |
| // VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_270_BIT_KHR | |
| VK_SURFACE_TRANSFORM_INHERIT_BIT_KHR; |
| |
| VkSurfaceTransformFlagBitsKHR TranslateNativeToVulkanTransform(int native) { |
| // Native and Vulkan transforms are isomorphic, but are represented |
| // differently. Vulkan transforms are built up of an optional horizontal |
| // mirror, followed by a clockwise 0/90/180/270-degree rotation. Native |
| // transforms are built up from a horizontal flip, vertical flip, and |
| // 90-degree rotation, all optional but always in that order. |
| |
| // TODO(jessehall): For now, only support pure rotations, not |
| // flip or flip-and-rotate, until I have more time to test them and build |
| // sample code. As far as I know we never actually use anything besides |
| // pure rotations anyway. |
| |
| switch (native) { |
| case 0: // 0x0 |
| return VK_SURFACE_TRANSFORM_IDENTITY_BIT_KHR; |
| // case NATIVE_WINDOW_TRANSFORM_FLIP_H: // 0x1 |
| // return VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_BIT_KHR; |
| // case NATIVE_WINDOW_TRANSFORM_FLIP_V: // 0x2 |
| // return VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_180_BIT_KHR; |
| case NATIVE_WINDOW_TRANSFORM_ROT_180: // FLIP_H | FLIP_V |
| return VK_SURFACE_TRANSFORM_ROTATE_180_BIT_KHR; |
| case NATIVE_WINDOW_TRANSFORM_ROT_90: // 0x4 |
| return VK_SURFACE_TRANSFORM_ROTATE_90_BIT_KHR; |
| // case NATIVE_WINDOW_TRANSFORM_FLIP_H | NATIVE_WINDOW_TRANSFORM_ROT_90: |
| // return VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_90_BIT_KHR; |
| // case NATIVE_WINDOW_TRANSFORM_FLIP_V | NATIVE_WINDOW_TRANSFORM_ROT_90: |
| // return VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_270_BIT_KHR; |
| case NATIVE_WINDOW_TRANSFORM_ROT_270: // FLIP_H | FLIP_V | ROT_90 |
| return VK_SURFACE_TRANSFORM_ROTATE_270_BIT_KHR; |
| case NATIVE_WINDOW_TRANSFORM_INVERSE_DISPLAY: |
| default: |
| return VK_SURFACE_TRANSFORM_IDENTITY_BIT_KHR; |
| } |
| } |
| |
| int InvertTransformToNative(VkSurfaceTransformFlagBitsKHR transform) { |
| switch (transform) { |
| case VK_SURFACE_TRANSFORM_ROTATE_90_BIT_KHR: |
| return NATIVE_WINDOW_TRANSFORM_ROT_270; |
| case VK_SURFACE_TRANSFORM_ROTATE_180_BIT_KHR: |
| return NATIVE_WINDOW_TRANSFORM_ROT_180; |
| case VK_SURFACE_TRANSFORM_ROTATE_270_BIT_KHR: |
| return NATIVE_WINDOW_TRANSFORM_ROT_90; |
| // TODO(jessehall): See TODO in TranslateNativeToVulkanTransform. |
| // case VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_BIT_KHR: |
| // return NATIVE_WINDOW_TRANSFORM_FLIP_H; |
| // case VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_90_BIT_KHR: |
| // return NATIVE_WINDOW_TRANSFORM_FLIP_H | |
| // NATIVE_WINDOW_TRANSFORM_ROT_90; |
| // case VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_180_BIT_KHR: |
| // return NATIVE_WINDOW_TRANSFORM_FLIP_V; |
| // case VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_270_BIT_KHR: |
| // return NATIVE_WINDOW_TRANSFORM_FLIP_V | |
| // NATIVE_WINDOW_TRANSFORM_ROT_90; |
| case VK_SURFACE_TRANSFORM_IDENTITY_BIT_KHR: |
| case VK_SURFACE_TRANSFORM_INHERIT_BIT_KHR: |
| default: |
| return 0; |
| } |
| } |
| |
| // ---------------------------------------------------------------------------- |
| |
| struct Surface { |
| android::sp<ANativeWindow> window; |
| VkSwapchainKHR swapchain_handle; |
| }; |
| |
| VkSurfaceKHR HandleFromSurface(Surface* surface) { |
| return VkSurfaceKHR(reinterpret_cast<uint64_t>(surface)); |
| } |
| |
| Surface* SurfaceFromHandle(VkSurfaceKHR handle) { |
| return reinterpret_cast<Surface*>(handle); |
| } |
| |
| struct Swapchain { |
| Swapchain(Surface& surface_, uint32_t num_images_) |
| : surface(surface_), num_images(num_images_) {} |
| |
| Surface& surface; |
| uint32_t num_images; |
| |
| struct Image { |
| Image() : image(VK_NULL_HANDLE), dequeue_fence(-1), dequeued(false) {} |
| VkImage image; |
| android::sp<ANativeWindowBuffer> buffer; |
| // The fence is only valid when the buffer is dequeued, and should be |
| // -1 any other time. When valid, we own the fd, and must ensure it is |
| // closed: either by closing it explicitly when queueing the buffer, |
| // or by passing ownership e.g. to ANativeWindow::cancelBuffer(). |
| int dequeue_fence; |
| bool dequeued; |
| } images[android::BufferQueue::NUM_BUFFER_SLOTS]; |
| }; |
| |
| VkSwapchainKHR HandleFromSwapchain(Swapchain* swapchain) { |
| return VkSwapchainKHR(reinterpret_cast<uint64_t>(swapchain)); |
| } |
| |
| Swapchain* SwapchainFromHandle(VkSwapchainKHR handle) { |
| return reinterpret_cast<Swapchain*>(handle); |
| } |
| |
| void ReleaseSwapchainImage(VkDevice device, |
| ANativeWindow* window, |
| int release_fence, |
| Swapchain::Image& image) { |
| ALOG_ASSERT(release_fence == -1 || image.dequeued, |
| "ReleaseSwapchainImage: can't provide a release fence for " |
| "non-dequeued images"); |
| |
| if (image.dequeued) { |
| if (release_fence >= 0) { |
| // We get here from vkQueuePresentKHR. The application is |
| // responsible for creating an execution dependency chain from |
| // vkAcquireNextImage (dequeue_fence) to vkQueuePresentKHR |
| // (release_fence), so we can drop the dequeue_fence here. |
| if (image.dequeue_fence >= 0) |
| close(image.dequeue_fence); |
| } else { |
| // We get here during swapchain destruction, or various serious |
| // error cases e.g. when we can't create the release_fence during |
| // vkQueuePresentKHR. In non-error cases, the dequeue_fence should |
| // have already signalled, since the swapchain images are supposed |
| // to be idle before the swapchain is destroyed. In error cases, |
| // there may be rendering in flight to the image, but since we |
| // weren't able to create a release_fence, waiting for the |
| // dequeue_fence is about the best we can do. |
| release_fence = image.dequeue_fence; |
| } |
| image.dequeue_fence = -1; |
| |
| if (window) { |
| window->cancelBuffer(window, image.buffer.get(), release_fence); |
| } else { |
| if (release_fence >= 0) { |
| sync_wait(release_fence, -1 /* forever */); |
| close(release_fence); |
| } |
| } |
| |
| image.dequeued = false; |
| } |
| |
| if (image.image) { |
| GetData(device).driver.DestroyImage(device, image.image, nullptr); |
| image.image = VK_NULL_HANDLE; |
| } |
| |
| image.buffer.clear(); |
| } |
| |
| void OrphanSwapchain(VkDevice device, Swapchain* swapchain) { |
| if (swapchain->surface.swapchain_handle != HandleFromSwapchain(swapchain)) |
| return; |
| for (uint32_t i = 0; i < swapchain->num_images; i++) { |
| if (!swapchain->images[i].dequeued) |
| ReleaseSwapchainImage(device, nullptr, -1, swapchain->images[i]); |
| } |
| swapchain->surface.swapchain_handle = VK_NULL_HANDLE; |
| } |
| |
| } // anonymous namespace |
| |
| VKAPI_ATTR |
| VkResult CreateAndroidSurfaceKHR( |
| VkInstance instance, |
| const VkAndroidSurfaceCreateInfoKHR* pCreateInfo, |
| const VkAllocationCallbacks* allocator, |
| VkSurfaceKHR* out_surface) { |
| if (!allocator) |
| allocator = &GetData(instance).allocator; |
| void* mem = allocator->pfnAllocation(allocator->pUserData, sizeof(Surface), |
| alignof(Surface), |
| VK_SYSTEM_ALLOCATION_SCOPE_OBJECT); |
| if (!mem) |
| return VK_ERROR_OUT_OF_HOST_MEMORY; |
| Surface* surface = new (mem) Surface; |
| |
| surface->window = pCreateInfo->window; |
| surface->swapchain_handle = VK_NULL_HANDLE; |
| |
| // TODO(jessehall): Create and use NATIVE_WINDOW_API_VULKAN. |
| int err = |
| native_window_api_connect(surface->window.get(), NATIVE_WINDOW_API_EGL); |
| if (err != 0) { |
| // TODO(jessehall): Improve error reporting. Can we enumerate possible |
| // errors and translate them to valid Vulkan result codes? |
| ALOGE("native_window_api_connect() failed: %s (%d)", strerror(-err), |
| err); |
| surface->~Surface(); |
| allocator->pfnFree(allocator->pUserData, surface); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| |
| *out_surface = HandleFromSurface(surface); |
| return VK_SUCCESS; |
| } |
| |
| VKAPI_ATTR |
| void DestroySurfaceKHR(VkInstance instance, |
| VkSurfaceKHR surface_handle, |
| const VkAllocationCallbacks* allocator) { |
| Surface* surface = SurfaceFromHandle(surface_handle); |
| if (!surface) |
| return; |
| native_window_api_disconnect(surface->window.get(), NATIVE_WINDOW_API_EGL); |
| ALOGV_IF(surface->swapchain_handle != VK_NULL_HANDLE, |
| "destroyed VkSurfaceKHR 0x%" PRIx64 |
| " has active VkSwapchainKHR 0x%" PRIx64, |
| reinterpret_cast<uint64_t>(surface_handle), |
| reinterpret_cast<uint64_t>(surface->swapchain_handle)); |
| surface->~Surface(); |
| if (!allocator) |
| allocator = &GetData(instance).allocator; |
| allocator->pfnFree(allocator->pUserData, surface); |
| } |
| |
| VKAPI_ATTR |
| VkResult GetPhysicalDeviceSurfaceSupportKHR(VkPhysicalDevice /*pdev*/, |
| uint32_t /*queue_family*/, |
| VkSurfaceKHR /*surface*/, |
| VkBool32* supported) { |
| *supported = VK_TRUE; |
| return VK_SUCCESS; |
| } |
| |
| VKAPI_ATTR |
| VkResult GetPhysicalDeviceSurfaceCapabilitiesKHR( |
| VkPhysicalDevice /*pdev*/, |
| VkSurfaceKHR surface, |
| VkSurfaceCapabilitiesKHR* capabilities) { |
| int err; |
| ANativeWindow* window = SurfaceFromHandle(surface)->window.get(); |
| |
| int width, height; |
| err = window->query(window, NATIVE_WINDOW_DEFAULT_WIDTH, &width); |
| if (err != 0) { |
| ALOGE("NATIVE_WINDOW_DEFAULT_WIDTH query failed: %s (%d)", |
| strerror(-err), err); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| err = window->query(window, NATIVE_WINDOW_DEFAULT_HEIGHT, &height); |
| if (err != 0) { |
| ALOGE("NATIVE_WINDOW_DEFAULT_WIDTH query failed: %s (%d)", |
| strerror(-err), err); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| |
| int transform_hint; |
| err = window->query(window, NATIVE_WINDOW_TRANSFORM_HINT, &transform_hint); |
| if (err != 0) { |
| ALOGE("NATIVE_WINDOW_TRANSFORM_HINT query failed: %s (%d)", |
| strerror(-err), err); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| |
| // TODO(jessehall): Figure out what the min/max values should be. |
| capabilities->minImageCount = 2; |
| capabilities->maxImageCount = 3; |
| |
| capabilities->currentExtent = |
| VkExtent2D{static_cast<uint32_t>(width), static_cast<uint32_t>(height)}; |
| |
| // TODO(jessehall): Figure out what the max extent should be. Maximum |
| // texture dimension maybe? |
| capabilities->minImageExtent = VkExtent2D{1, 1}; |
| capabilities->maxImageExtent = VkExtent2D{4096, 4096}; |
| |
| capabilities->maxImageArrayLayers = 1; |
| |
| capabilities->supportedTransforms = kSupportedTransforms; |
| capabilities->currentTransform = |
| TranslateNativeToVulkanTransform(transform_hint); |
| |
| // On Android, window composition is a WindowManager property, not something |
| // associated with the bufferqueue. It can't be changed from here. |
| capabilities->supportedCompositeAlpha = VK_COMPOSITE_ALPHA_INHERIT_BIT_KHR; |
| |
| // TODO(jessehall): I think these are right, but haven't thought hard about |
| // it. Do we need to query the driver for support of any of these? |
| // Currently not included: |
| // - VK_IMAGE_USAGE_GENERAL: maybe? does this imply cpu mappable? |
| // - VK_IMAGE_USAGE_DEPTH_STENCIL_BIT: definitely not |
| // - VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT: definitely not |
| capabilities->supportedUsageFlags = |
| VK_IMAGE_USAGE_TRANSFER_SRC_BIT | VK_IMAGE_USAGE_TRANSFER_DST_BIT | |
| VK_IMAGE_USAGE_SAMPLED_BIT | VK_IMAGE_USAGE_STORAGE_BIT | |
| VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT | |
| VK_IMAGE_USAGE_INPUT_ATTACHMENT_BIT; |
| |
| return VK_SUCCESS; |
| } |
| |
| VKAPI_ATTR |
| VkResult GetPhysicalDeviceSurfaceFormatsKHR(VkPhysicalDevice /*pdev*/, |
| VkSurfaceKHR /*surface*/, |
| uint32_t* count, |
| VkSurfaceFormatKHR* formats) { |
| // TODO(jessehall): Fill out the set of supported formats. Longer term, add |
| // a new gralloc method to query whether a (format, usage) pair is |
| // supported, and check that for each gralloc format that corresponds to a |
| // Vulkan format. Shorter term, just add a few more formats to the ones |
| // hardcoded below. |
| |
| const VkSurfaceFormatKHR kFormats[] = { |
| {VK_FORMAT_R8G8B8A8_UNORM, VK_COLOR_SPACE_SRGB_NONLINEAR_KHR}, |
| {VK_FORMAT_R8G8B8A8_SRGB, VK_COLOR_SPACE_SRGB_NONLINEAR_KHR}, |
| {VK_FORMAT_R5G6B5_UNORM_PACK16, VK_COLOR_SPACE_SRGB_NONLINEAR_KHR}, |
| }; |
| const uint32_t kNumFormats = sizeof(kFormats) / sizeof(kFormats[0]); |
| |
| VkResult result = VK_SUCCESS; |
| if (formats) { |
| if (*count < kNumFormats) |
| result = VK_INCOMPLETE; |
| std::copy(kFormats, kFormats + std::min(*count, kNumFormats), formats); |
| } |
| *count = kNumFormats; |
| return result; |
| } |
| |
| VKAPI_ATTR |
| VkResult GetPhysicalDeviceSurfacePresentModesKHR(VkPhysicalDevice /*pdev*/, |
| VkSurfaceKHR /*surface*/, |
| uint32_t* count, |
| VkPresentModeKHR* modes) { |
| const VkPresentModeKHR kModes[] = { |
| VK_PRESENT_MODE_MAILBOX_KHR, VK_PRESENT_MODE_FIFO_KHR, |
| }; |
| const uint32_t kNumModes = sizeof(kModes) / sizeof(kModes[0]); |
| |
| VkResult result = VK_SUCCESS; |
| if (modes) { |
| if (*count < kNumModes) |
| result = VK_INCOMPLETE; |
| std::copy(kModes, kModes + std::min(*count, kNumModes), modes); |
| } |
| *count = kNumModes; |
| return result; |
| } |
| |
| VKAPI_ATTR |
| VkResult CreateSwapchainKHR(VkDevice device, |
| const VkSwapchainCreateInfoKHR* create_info, |
| const VkAllocationCallbacks* allocator, |
| VkSwapchainKHR* swapchain_handle) { |
| int err; |
| VkResult result = VK_SUCCESS; |
| |
| ALOGV("vkCreateSwapchainKHR: surface=0x%" PRIx64 |
| " minImageCount=%u imageFormat=%u imageColorSpace=%u" |
| " imageExtent=%ux%u imageUsage=%#x preTransform=%u presentMode=%u" |
| " oldSwapchain=0x%" PRIx64, |
| reinterpret_cast<uint64_t>(create_info->surface), |
| create_info->minImageCount, create_info->imageFormat, |
| create_info->imageColorSpace, create_info->imageExtent.width, |
| create_info->imageExtent.height, create_info->imageUsage, |
| create_info->preTransform, create_info->presentMode, |
| reinterpret_cast<uint64_t>(create_info->oldSwapchain)); |
| |
| if (!allocator) |
| allocator = &GetData(device).allocator; |
| |
| ALOGV_IF(create_info->imageArrayLayers != 1, |
| "swapchain imageArrayLayers=%u not supported", |
| create_info->imageArrayLayers); |
| ALOGV_IF(create_info->imageColorSpace != VK_COLOR_SPACE_SRGB_NONLINEAR_KHR, |
| "swapchain imageColorSpace=%u not supported", |
| create_info->imageColorSpace); |
| ALOGV_IF((create_info->preTransform & ~kSupportedTransforms) != 0, |
| "swapchain preTransform=%#x not supported", |
| create_info->preTransform); |
| ALOGV_IF(!(create_info->presentMode == VK_PRESENT_MODE_FIFO_KHR || |
| create_info->presentMode == VK_PRESENT_MODE_MAILBOX_KHR), |
| "swapchain presentMode=%u not supported", |
| create_info->presentMode); |
| |
| Surface& surface = *SurfaceFromHandle(create_info->surface); |
| |
| if (surface.swapchain_handle != create_info->oldSwapchain) { |
| ALOGV("Can't create a swapchain for VkSurfaceKHR 0x%" PRIx64 |
| " because it already has active swapchain 0x%" PRIx64 |
| " but VkSwapchainCreateInfo::oldSwapchain=0x%" PRIx64, |
| reinterpret_cast<uint64_t>(create_info->surface), |
| reinterpret_cast<uint64_t>(surface.swapchain_handle), |
| reinterpret_cast<uint64_t>(create_info->oldSwapchain)); |
| return VK_ERROR_NATIVE_WINDOW_IN_USE_KHR; |
| } |
| if (create_info->oldSwapchain != VK_NULL_HANDLE) |
| OrphanSwapchain(device, SwapchainFromHandle(create_info->oldSwapchain)); |
| |
| // -- Reset the native window -- |
| // The native window might have been used previously, and had its properties |
| // changed from defaults. That will affect the answer we get for queries |
| // like MIN_UNDEQUED_BUFFERS. Reset to a known/default state before we |
| // attempt such queries. |
| |
| // The native window only allows dequeueing all buffers before any have |
| // been queued, since after that point at least one is assumed to be in |
| // non-FREE state at any given time. Disconnecting and re-connecting |
| // orphans the previous buffers, getting us back to the state where we can |
| // dequeue all buffers. |
| err = native_window_api_disconnect(surface.window.get(), |
| NATIVE_WINDOW_API_EGL); |
| ALOGW_IF(err != 0, "native_window_api_disconnect failed: %s (%d)", |
| strerror(-err), err); |
| err = |
| native_window_api_connect(surface.window.get(), NATIVE_WINDOW_API_EGL); |
| ALOGW_IF(err != 0, "native_window_api_connect failed: %s (%d)", |
| strerror(-err), err); |
| |
| err = native_window_set_buffer_count(surface.window.get(), 0); |
| if (err != 0) { |
| ALOGE("native_window_set_buffer_count(0) failed: %s (%d)", |
| strerror(-err), err); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| |
| err = surface.window->setSwapInterval(surface.window.get(), 1); |
| if (err != 0) { |
| // TODO(jessehall): Improve error reporting. Can we enumerate possible |
| // errors and translate them to valid Vulkan result codes? |
| ALOGE("native_window->setSwapInterval(1) failed: %s (%d)", |
| strerror(-err), err); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| |
| // -- Configure the native window -- |
| |
| const auto& dispatch = GetData(device).driver; |
| |
| int native_format = HAL_PIXEL_FORMAT_RGBA_8888; |
| switch (create_info->imageFormat) { |
| case VK_FORMAT_R8G8B8A8_UNORM: |
| case VK_FORMAT_R8G8B8A8_SRGB: |
| native_format = HAL_PIXEL_FORMAT_RGBA_8888; |
| break; |
| case VK_FORMAT_R5G6B5_UNORM_PACK16: |
| native_format = HAL_PIXEL_FORMAT_RGB_565; |
| break; |
| default: |
| ALOGV("unsupported swapchain format %d", create_info->imageFormat); |
| break; |
| } |
| err = native_window_set_buffers_format(surface.window.get(), native_format); |
| if (err != 0) { |
| // TODO(jessehall): Improve error reporting. Can we enumerate possible |
| // errors and translate them to valid Vulkan result codes? |
| ALOGE("native_window_set_buffers_format(%d) failed: %s (%d)", |
| native_format, strerror(-err), err); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| err = native_window_set_buffers_data_space(surface.window.get(), |
| HAL_DATASPACE_SRGB_LINEAR); |
| if (err != 0) { |
| // TODO(jessehall): Improve error reporting. Can we enumerate possible |
| // errors and translate them to valid Vulkan result codes? |
| ALOGE("native_window_set_buffers_data_space(%d) failed: %s (%d)", |
| HAL_DATASPACE_SRGB_LINEAR, strerror(-err), err); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| |
| err = native_window_set_buffers_dimensions( |
| surface.window.get(), static_cast<int>(create_info->imageExtent.width), |
| static_cast<int>(create_info->imageExtent.height)); |
| if (err != 0) { |
| // TODO(jessehall): Improve error reporting. Can we enumerate possible |
| // errors and translate them to valid Vulkan result codes? |
| ALOGE("native_window_set_buffers_dimensions(%d,%d) failed: %s (%d)", |
| create_info->imageExtent.width, create_info->imageExtent.height, |
| strerror(-err), err); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| |
| // VkSwapchainCreateInfo::preTransform indicates the transformation the app |
| // applied during rendering. native_window_set_transform() expects the |
| // inverse: the transform the app is requesting that the compositor perform |
| // during composition. With native windows, pre-transform works by rendering |
| // with the same transform the compositor is applying (as in Vulkan), but |
| // then requesting the inverse transform, so that when the compositor does |
| // it's job the two transforms cancel each other out and the compositor ends |
| // up applying an identity transform to the app's buffer. |
| err = native_window_set_buffers_transform( |
| surface.window.get(), |
| InvertTransformToNative(create_info->preTransform)); |
| if (err != 0) { |
| // TODO(jessehall): Improve error reporting. Can we enumerate possible |
| // errors and translate them to valid Vulkan result codes? |
| ALOGE("native_window_set_buffers_transform(%d) failed: %s (%d)", |
| InvertTransformToNative(create_info->preTransform), |
| strerror(-err), err); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| |
| err = native_window_set_scaling_mode( |
| surface.window.get(), NATIVE_WINDOW_SCALING_MODE_SCALE_TO_WINDOW); |
| if (err != 0) { |
| // TODO(jessehall): Improve error reporting. Can we enumerate possible |
| // errors and translate them to valid Vulkan result codes? |
| ALOGE("native_window_set_scaling_mode(SCALE_TO_WINDOW) failed: %s (%d)", |
| strerror(-err), err); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| |
| int query_value; |
| err = surface.window->query(surface.window.get(), |
| NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS, |
| &query_value); |
| if (err != 0 || query_value < 0) { |
| // TODO(jessehall): Improve error reporting. Can we enumerate possible |
| // errors and translate them to valid Vulkan result codes? |
| ALOGE("window->query failed: %s (%d) value=%d", strerror(-err), err, |
| query_value); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| uint32_t min_undequeued_buffers = static_cast<uint32_t>(query_value); |
| // The MIN_UNDEQUEUED_BUFFERS query doesn't know whether we'll be using |
| // async mode or not, and assumes not. But in async mode, the BufferQueue |
| // requires an extra undequeued buffer. |
| // See BufferQueueCore::getMinUndequeuedBufferCountLocked(). |
| if (create_info->presentMode == VK_PRESENT_MODE_MAILBOX_KHR) |
| min_undequeued_buffers += 1; |
| |
| uint32_t num_images = |
| (create_info->minImageCount - 1) + min_undequeued_buffers; |
| err = native_window_set_buffer_count(surface.window.get(), num_images); |
| if (err != 0) { |
| // TODO(jessehall): Improve error reporting. Can we enumerate possible |
| // errors and translate them to valid Vulkan result codes? |
| ALOGE("native_window_set_buffer_count(%d) failed: %s (%d)", num_images, |
| strerror(-err), err); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| |
| int gralloc_usage = 0; |
| // TODO(jessehall): Remove conditional once all drivers have been updated |
| if (dispatch.GetSwapchainGrallocUsageANDROID) { |
| result = dispatch.GetSwapchainGrallocUsageANDROID( |
| device, create_info->imageFormat, create_info->imageUsage, |
| &gralloc_usage); |
| if (result != VK_SUCCESS) { |
| ALOGE("vkGetSwapchainGrallocUsageANDROID failed: %d", result); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| } else { |
| gralloc_usage = GRALLOC_USAGE_HW_RENDER | GRALLOC_USAGE_HW_TEXTURE; |
| } |
| err = native_window_set_usage(surface.window.get(), gralloc_usage); |
| if (err != 0) { |
| // TODO(jessehall): Improve error reporting. Can we enumerate possible |
| // errors and translate them to valid Vulkan result codes? |
| ALOGE("native_window_set_usage failed: %s (%d)", strerror(-err), err); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| |
| int swap_interval = |
| create_info->presentMode == VK_PRESENT_MODE_MAILBOX_KHR ? 0 : 1; |
| err = surface.window->setSwapInterval(surface.window.get(), swap_interval); |
| if (err != 0) { |
| // TODO(jessehall): Improve error reporting. Can we enumerate possible |
| // errors and translate them to valid Vulkan result codes? |
| ALOGE("native_window->setSwapInterval(%d) failed: %s (%d)", |
| swap_interval, strerror(-err), err); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| |
| // -- Allocate our Swapchain object -- |
| // After this point, we must deallocate the swapchain on error. |
| |
| void* mem = allocator->pfnAllocation(allocator->pUserData, |
| sizeof(Swapchain), alignof(Swapchain), |
| VK_SYSTEM_ALLOCATION_SCOPE_OBJECT); |
| if (!mem) |
| return VK_ERROR_OUT_OF_HOST_MEMORY; |
| Swapchain* swapchain = new (mem) Swapchain(surface, num_images); |
| |
| // -- Dequeue all buffers and create a VkImage for each -- |
| // Any failures during or after this must cancel the dequeued buffers. |
| |
| VkNativeBufferANDROID image_native_buffer = { |
| #pragma clang diagnostic push |
| #pragma clang diagnostic ignored "-Wold-style-cast" |
| .sType = VK_STRUCTURE_TYPE_NATIVE_BUFFER_ANDROID, |
| #pragma clang diagnostic pop |
| .pNext = nullptr, |
| }; |
| VkImageCreateInfo image_create = { |
| .sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO, |
| .pNext = &image_native_buffer, |
| .imageType = VK_IMAGE_TYPE_2D, |
| .format = create_info->imageFormat, |
| .extent = {0, 0, 1}, |
| .mipLevels = 1, |
| .arrayLayers = 1, |
| .samples = VK_SAMPLE_COUNT_1_BIT, |
| .tiling = VK_IMAGE_TILING_OPTIMAL, |
| .usage = create_info->imageUsage, |
| .flags = 0, |
| .sharingMode = create_info->imageSharingMode, |
| .queueFamilyIndexCount = create_info->queueFamilyIndexCount, |
| .pQueueFamilyIndices = create_info->pQueueFamilyIndices, |
| }; |
| |
| for (uint32_t i = 0; i < num_images; i++) { |
| Swapchain::Image& img = swapchain->images[i]; |
| |
| ANativeWindowBuffer* buffer; |
| err = surface.window->dequeueBuffer(surface.window.get(), &buffer, |
| &img.dequeue_fence); |
| if (err != 0) { |
| // TODO(jessehall): Improve error reporting. Can we enumerate |
| // possible errors and translate them to valid Vulkan result codes? |
| ALOGE("dequeueBuffer[%u] failed: %s (%d)", i, strerror(-err), err); |
| result = VK_ERROR_INITIALIZATION_FAILED; |
| break; |
| } |
| img.buffer = buffer; |
| img.dequeued = true; |
| |
| image_create.extent = |
| VkExtent3D{static_cast<uint32_t>(img.buffer->width), |
| static_cast<uint32_t>(img.buffer->height), |
| 1}; |
| image_native_buffer.handle = img.buffer->handle; |
| image_native_buffer.stride = img.buffer->stride; |
| image_native_buffer.format = img.buffer->format; |
| image_native_buffer.usage = img.buffer->usage; |
| |
| result = |
| dispatch.CreateImage(device, &image_create, nullptr, &img.image); |
| if (result != VK_SUCCESS) { |
| ALOGD("vkCreateImage w/ native buffer failed: %u", result); |
| break; |
| } |
| } |
| |
| // -- Cancel all buffers, returning them to the queue -- |
| // If an error occurred before, also destroy the VkImage and release the |
| // buffer reference. Otherwise, we retain a strong reference to the buffer. |
| // |
| // TODO(jessehall): The error path here is the same as DestroySwapchain, |
| // but not the non-error path. Should refactor/unify. |
| for (uint32_t i = 0; i < num_images; i++) { |
| Swapchain::Image& img = swapchain->images[i]; |
| if (img.dequeued) { |
| surface.window->cancelBuffer(surface.window.get(), img.buffer.get(), |
| img.dequeue_fence); |
| img.dequeue_fence = -1; |
| img.dequeued = false; |
| } |
| if (result != VK_SUCCESS) { |
| if (img.image) |
| dispatch.DestroyImage(device, img.image, nullptr); |
| } |
| } |
| |
| if (result != VK_SUCCESS) { |
| swapchain->~Swapchain(); |
| allocator->pfnFree(allocator->pUserData, swapchain); |
| return result; |
| } |
| |
| surface.swapchain_handle = HandleFromSwapchain(swapchain); |
| *swapchain_handle = surface.swapchain_handle; |
| return VK_SUCCESS; |
| } |
| |
| VKAPI_ATTR |
| void DestroySwapchainKHR(VkDevice device, |
| VkSwapchainKHR swapchain_handle, |
| const VkAllocationCallbacks* allocator) { |
| const auto& dispatch = GetData(device).driver; |
| Swapchain* swapchain = SwapchainFromHandle(swapchain_handle); |
| bool active = swapchain->surface.swapchain_handle == swapchain_handle; |
| ANativeWindow* window = active ? swapchain->surface.window.get() : nullptr; |
| |
| for (uint32_t i = 0; i < swapchain->num_images; i++) |
| ReleaseSwapchainImage(device, window, -1, swapchain->images[i]); |
| if (active) |
| swapchain->surface.swapchain_handle = VK_NULL_HANDLE; |
| if (!allocator) |
| allocator = &GetData(device).allocator; |
| swapchain->~Swapchain(); |
| allocator->pfnFree(allocator->pUserData, swapchain); |
| } |
| |
| VKAPI_ATTR |
| VkResult GetSwapchainImagesKHR(VkDevice, |
| VkSwapchainKHR swapchain_handle, |
| uint32_t* count, |
| VkImage* images) { |
| Swapchain& swapchain = *SwapchainFromHandle(swapchain_handle); |
| ALOGW_IF(swapchain.surface.swapchain_handle != swapchain_handle, |
| "getting images for non-active swapchain 0x%" PRIx64 |
| "; only dequeued image handles are valid", |
| reinterpret_cast<uint64_t>(swapchain_handle)); |
| VkResult result = VK_SUCCESS; |
| if (images) { |
| uint32_t n = swapchain.num_images; |
| if (*count < swapchain.num_images) { |
| n = *count; |
| result = VK_INCOMPLETE; |
| } |
| for (uint32_t i = 0; i < n; i++) |
| images[i] = swapchain.images[i].image; |
| } |
| *count = swapchain.num_images; |
| return result; |
| } |
| |
| VKAPI_ATTR |
| VkResult AcquireNextImageKHR(VkDevice device, |
| VkSwapchainKHR swapchain_handle, |
| uint64_t timeout, |
| VkSemaphore semaphore, |
| VkFence vk_fence, |
| uint32_t* image_index) { |
| Swapchain& swapchain = *SwapchainFromHandle(swapchain_handle); |
| ANativeWindow* window = swapchain.surface.window.get(); |
| VkResult result; |
| int err; |
| |
| if (swapchain.surface.swapchain_handle != swapchain_handle) |
| return VK_ERROR_OUT_OF_DATE_KHR; |
| |
| ALOGW_IF( |
| timeout != UINT64_MAX, |
| "vkAcquireNextImageKHR: non-infinite timeouts not yet implemented"); |
| |
| ANativeWindowBuffer* buffer; |
| int fence_fd; |
| err = window->dequeueBuffer(window, &buffer, &fence_fd); |
| if (err != 0) { |
| // TODO(jessehall): Improve error reporting. Can we enumerate possible |
| // errors and translate them to valid Vulkan result codes? |
| ALOGE("dequeueBuffer failed: %s (%d)", strerror(-err), err); |
| return VK_ERROR_INITIALIZATION_FAILED; |
| } |
| |
| uint32_t idx; |
| for (idx = 0; idx < swapchain.num_images; idx++) { |
| if (swapchain.images[idx].buffer.get() == buffer) { |
| swapchain.images[idx].dequeued = true; |
| swapchain.images[idx].dequeue_fence = fence_fd; |
| break; |
| } |
| } |
| if (idx == swapchain.num_images) { |
| ALOGE("dequeueBuffer returned unrecognized buffer"); |
| window->cancelBuffer(window, buffer, fence_fd); |
| return VK_ERROR_OUT_OF_DATE_KHR; |
| } |
| |
| int fence_clone = -1; |
| if (fence_fd != -1) { |
| fence_clone = dup(fence_fd); |
| if (fence_clone == -1) { |
| ALOGE("dup(fence) failed, stalling until signalled: %s (%d)", |
| strerror(errno), errno); |
| sync_wait(fence_fd, -1 /* forever */); |
| } |
| } |
| |
| result = GetData(device).driver.AcquireImageANDROID( |
| device, swapchain.images[idx].image, fence_clone, semaphore, vk_fence); |
| if (result != VK_SUCCESS) { |
| // NOTE: we're relying on AcquireImageANDROID to close fence_clone, |
| // even if the call fails. We could close it ourselves on failure, but |
| // that would create a race condition if the driver closes it on a |
| // failure path: some other thread might create an fd with the same |
| // number between the time the driver closes it and the time we close |
| // it. We must assume one of: the driver *always* closes it even on |
| // failure, or *never* closes it on failure. |
| window->cancelBuffer(window, buffer, fence_fd); |
| swapchain.images[idx].dequeued = false; |
| swapchain.images[idx].dequeue_fence = -1; |
| return result; |
| } |
| |
| *image_index = idx; |
| return VK_SUCCESS; |
| } |
| |
| static VkResult WorstPresentResult(VkResult a, VkResult b) { |
| // See the error ranking for vkQueuePresentKHR at the end of section 29.6 |
| // (in spec version 1.0.14). |
| static const VkResult kWorstToBest[] = { |
| VK_ERROR_DEVICE_LOST, |
| VK_ERROR_SURFACE_LOST_KHR, |
| VK_ERROR_OUT_OF_DATE_KHR, |
| VK_ERROR_OUT_OF_DEVICE_MEMORY, |
| VK_ERROR_OUT_OF_HOST_MEMORY, |
| VK_SUBOPTIMAL_KHR, |
| }; |
| for (auto result : kWorstToBest) { |
| if (a == result || b == result) |
| return result; |
| } |
| ALOG_ASSERT(a == VK_SUCCESS, "invalid vkQueuePresentKHR result %d", a); |
| ALOG_ASSERT(b == VK_SUCCESS, "invalid vkQueuePresentKHR result %d", b); |
| return a != VK_SUCCESS ? a : b; |
| } |
| |
| VKAPI_ATTR |
| VkResult QueuePresentKHR(VkQueue queue, const VkPresentInfoKHR* present_info) { |
| ALOGV_IF(present_info->sType != VK_STRUCTURE_TYPE_PRESENT_INFO_KHR, |
| "vkQueuePresentKHR: invalid VkPresentInfoKHR structure type %d", |
| present_info->sType); |
| ALOGV_IF(present_info->pNext, "VkPresentInfo::pNext != NULL"); |
| |
| VkDevice device = GetData(queue).driver_device; |
| const auto& dispatch = GetData(queue).driver; |
| VkResult final_result = VK_SUCCESS; |
| |
| for (uint32_t sc = 0; sc < present_info->swapchainCount; sc++) { |
| Swapchain& swapchain = |
| *SwapchainFromHandle(present_info->pSwapchains[sc]); |
| uint32_t image_idx = present_info->pImageIndices[sc]; |
| Swapchain::Image& img = swapchain.images[image_idx]; |
| VkResult swapchain_result = VK_SUCCESS; |
| VkResult result; |
| int err; |
| |
| int fence = -1; |
| result = dispatch.QueueSignalReleaseImageANDROID( |
| queue, present_info->waitSemaphoreCount, |
| present_info->pWaitSemaphores, img.image, &fence); |
| if (result != VK_SUCCESS) { |
| ALOGE("QueueSignalReleaseImageANDROID failed: %d", result); |
| swapchain_result = result; |
| } |
| |
| if (swapchain.surface.swapchain_handle == |
| present_info->pSwapchains[sc]) { |
| ANativeWindow* window = swapchain.surface.window.get(); |
| if (swapchain_result == VK_SUCCESS) { |
| err = window->queueBuffer(window, img.buffer.get(), fence); |
| // queueBuffer always closes fence, even on error |
| if (err != 0) { |
| // TODO(jessehall): What now? We should probably cancel the |
| // buffer, I guess? |
| ALOGE("queueBuffer failed: %s (%d)", strerror(-err), err); |
| swapchain_result = WorstPresentResult( |
| swapchain_result, VK_ERROR_OUT_OF_DATE_KHR); |
| } |
| if (img.dequeue_fence >= 0) { |
| close(img.dequeue_fence); |
| img.dequeue_fence = -1; |
| } |
| img.dequeued = false; |
| } |
| if (swapchain_result != VK_SUCCESS) { |
| ReleaseSwapchainImage(device, window, fence, img); |
| OrphanSwapchain(device, &swapchain); |
| } |
| } else { |
| ReleaseSwapchainImage(device, nullptr, fence, img); |
| swapchain_result = VK_ERROR_OUT_OF_DATE_KHR; |
| } |
| |
| if (present_info->pResults) |
| present_info->pResults[sc] = swapchain_result; |
| |
| if (swapchain_result != final_result) |
| final_result = WorstPresentResult(final_result, swapchain_result); |
| } |
| |
| return final_result; |
| } |
| |
| } // namespace driver |
| } // namespace vulkan |