libs/ui/GraphicBufferMapper.cpp - platform/frameworks/native - Gitiles

 /*
  * Copyright (C) 2007 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #define LOG_TAG "GraphicBufferMapper"
 #define ATRACE_TAG ATRACE_TAG_GRAPHICS
 //#define LOG_NDEBUG 0

 #include <ui/GraphicBufferMapper.h>

 // We would eliminate the non-conforming zero-length array, but we can't since
 // this is effectively included from the Linux kernel
 #pragma clang diagnostic push
 #pragma clang diagnostic ignored "-Wzero-length-array"
 #include <sync/sync.h>
 #pragma clang diagnostic pop

 #include <utils/Log.h>
 #include <utils/Trace.h>

 #include <ui/GrallocMapper.h>
 #include <ui/GraphicBuffer.h>

 #include <system/graphics.h>

 namespace android {
 // ---------------------------------------------------------------------------

 ANDROID_SINGLETON_STATIC_INSTANCE( GraphicBufferMapper )

 GraphicBufferMapper::GraphicBufferMapper()
   : mMapper(std::make_unique<const Gralloc2::Mapper>())
 {
     if (!mMapper->valid()) {
         mLoader = std::make_unique<Gralloc1::Loader>();
         mDevice = mLoader->getDevice();
     }
 }


 status_t GraphicBufferMapper::registerBuffer(buffer_handle_t handle)
 {
     ATRACE_CALL();

     gralloc1_error_t error;
     if (mMapper->valid()) {
         error = static_cast<gralloc1_error_t>(mMapper->retain(handle));
     } else {
         // This always returns GRALLOC1_BAD_HANDLE when handle is from a
         // remote process and mDevice is backed by Gralloc1On0Adapter.
         error = mDevice->retain(handle);
         if (error == GRALLOC1_ERROR_BAD_HANDLE &&
                 mDevice->hasCapability(GRALLOC1_CAPABILITY_ON_ADAPTER)) {
             ALOGE("registerBuffer by handle is not supported with "
                   "Gralloc1On0Adapter");
         }
     }

     ALOGW_IF(error != GRALLOC1_ERROR_NONE, "registerBuffer(%p) failed: %d",
             handle, error);

     return error;
 }

 status_t GraphicBufferMapper::registerBuffer(const GraphicBuffer* buffer)
 {
     ATRACE_CALL();

     gralloc1_error_t error;
     if (mMapper->valid()) {
         error = static_cast<gralloc1_error_t>(
                 mMapper->retain(buffer->getNativeBuffer()->handle));
     } else {
         error = mDevice->retain(buffer);
     }

     ALOGW_IF(error != GRALLOC1_ERROR_NONE, "registerBuffer(%p) failed: %d",
             buffer->getNativeBuffer()->handle, error);

     return error;
 }

 status_t GraphicBufferMapper::unregisterBuffer(buffer_handle_t handle)
 {
     ATRACE_CALL();

     gralloc1_error_t error;
     if (mMapper->valid()) {
         mMapper->release(handle);
         error = GRALLOC1_ERROR_NONE;
     } else {
         error = mDevice->release(handle);
     }

     ALOGW_IF(error != GRALLOC1_ERROR_NONE, "unregisterBuffer(%p): failed %d",
             handle, error);

     return error;
 }

 static inline gralloc1_rect_t asGralloc1Rect(const Rect& rect) {
     gralloc1_rect_t outRect{};
     outRect.left = rect.left;
     outRect.top = rect.top;
     outRect.width = rect.width();
     outRect.height = rect.height();
     return outRect;
 }


 status_t GraphicBufferMapper::getDimensions(buffer_handle_t handle,
         uint32_t* outWidth, uint32_t* outHeight) const
 {
     ATRACE_CALL();

     gralloc1_error_t error;
     if (mMapper->valid()) {
         mMapper->getDimensions(handle, outWidth, outHeight);
         error = GRALLOC1_ERROR_NONE;
     } else {
         error = mDevice->getDimensions(handle, outWidth, outHeight);
     }

     ALOGW_IF(error != GRALLOC1_ERROR_NONE, "getDimensions(%p, ...): failed %d",
             handle, error);

     return error;
 }

 status_t GraphicBufferMapper::getFormat(buffer_handle_t handle,
         int32_t* outFormat) const
 {
     ATRACE_CALL();

     gralloc1_error_t error;
     if (mMapper->valid()) {
         mMapper->getFormat(handle, outFormat);
         error = GRALLOC1_ERROR_NONE;
     } else {
         error = mDevice->getFormat(handle, outFormat);
     }

     ALOGW_IF(error != GRALLOC1_ERROR_NONE, "getFormat(%p, ...): failed %d",
             handle, error);

     return error;
 }

 status_t GraphicBufferMapper::getLayerCount(buffer_handle_t handle,
         uint32_t* outLayerCount) const
 {
     ATRACE_CALL();

     gralloc1_error_t error;
     if (mMapper->valid()) {
         mMapper->getLayerCount(handle, outLayerCount);
         error = GRALLOC1_ERROR_NONE;
     } else {
         error = mDevice->getLayerCount(handle, outLayerCount);
     }

     ALOGW_IF(error != GRALLOC1_ERROR_NONE, "getLayerCount(%p, ...): failed %d",
             handle, error);

     return error;
 }

 status_t GraphicBufferMapper::getProducerUsage(buffer_handle_t handle,
         uint64_t* outProducerUsage) const
 {
     ATRACE_CALL();

     gralloc1_error_t error;
     if (mMapper->valid()) {
         mMapper->getProducerUsage(handle, outProducerUsage);
         error = GRALLOC1_ERROR_NONE;
     } else {
         error = mDevice->getProducerUsage(handle, outProducerUsage);
     }

     ALOGW_IF(error != GRALLOC1_ERROR_NONE,
             "getProducerUsage(%p, ...): failed %d", handle, error);

     return error;
 }

 status_t GraphicBufferMapper::getConsumerUsage(buffer_handle_t handle,
         uint64_t* outConsumerUsage) const
 {
     ATRACE_CALL();

     gralloc1_error_t error;
     if (mMapper->valid()) {
         mMapper->getConsumerUsage(handle, outConsumerUsage);
         error = GRALLOC1_ERROR_NONE;
     } else {
         error = mDevice->getConsumerUsage(handle, outConsumerUsage);
     }

     ALOGW_IF(error != GRALLOC1_ERROR_NONE,
             "getConsumerUsage(%p, ...): failed %d", handle, error);

     return error;
 }

 status_t GraphicBufferMapper::getBackingStore(buffer_handle_t handle,
         uint64_t* outBackingStore) const
 {
     ATRACE_CALL();

     gralloc1_error_t error;
     if (mMapper->valid()) {
         mMapper->getBackingStore(handle, outBackingStore);
         error = GRALLOC1_ERROR_NONE;
     } else {
         error = mDevice->getBackingStore(handle, outBackingStore);
     }

     ALOGW_IF(error != GRALLOC1_ERROR_NONE,
             "getBackingStore(%p, ...): failed %d", handle, error);

     return error;
 }

 status_t GraphicBufferMapper::getStride(buffer_handle_t handle,
         uint32_t* outStride) const
 {
     ATRACE_CALL();

     gralloc1_error_t error;
     if (mMapper->valid()) {
         mMapper->getStride(handle, outStride);
         error = GRALLOC1_ERROR_NONE;
     } else {
         error = mDevice->getStride(handle, outStride);
     }

     ALOGW_IF(error != GRALLOC1_ERROR_NONE, "getStride(%p, ...): failed %d",
             handle, error);

     return error;
 }

 status_t GraphicBufferMapper::lock(buffer_handle_t handle, uint32_t usage,
         const Rect& bounds, void** vaddr)
 {
     return lockAsync(handle, usage, bounds, vaddr, -1);
 }

 status_t GraphicBufferMapper::lockYCbCr(buffer_handle_t handle, uint32_t usage,
         const Rect& bounds, android_ycbcr *ycbcr)
 {
     return lockAsyncYCbCr(handle, usage, bounds, ycbcr, -1);
 }

 status_t GraphicBufferMapper::unlock(buffer_handle_t handle)
 {
     int32_t fenceFd = -1;
     status_t error = unlockAsync(handle, &fenceFd);
     if (error == NO_ERROR) {
         sync_wait(fenceFd, -1);
         close(fenceFd);
     }
     return error;
 }

 status_t GraphicBufferMapper::lockAsync(buffer_handle_t handle,
         uint32_t usage, const Rect& bounds, void** vaddr, int fenceFd)
 {
     return lockAsync(handle, usage, usage, bounds, vaddr, fenceFd);
 }

 status_t GraphicBufferMapper::lockAsync(buffer_handle_t handle,
         uint64_t producerUsage, uint64_t consumerUsage, const Rect& bounds,
         void** vaddr, int fenceFd)
 {
     ATRACE_CALL();

     gralloc1_rect_t accessRegion = asGralloc1Rect(bounds);
     gralloc1_error_t error;
     if (mMapper->valid()) {
         const Gralloc2::IMapper::Rect& accessRect =
             *reinterpret_cast<Gralloc2::IMapper::Rect*>(&accessRegion);
         error = static_cast<gralloc1_error_t>(mMapper->lock(
                     handle, producerUsage, consumerUsage, accessRect,
                     fenceFd, vaddr));
     } else {
         sp<Fence> fence = new Fence(fenceFd);
         error = mDevice->lock(handle,
                 static_cast<gralloc1_producer_usage_t>(producerUsage),
                 static_cast<gralloc1_consumer_usage_t>(consumerUsage),
                 &accessRegion, vaddr, fence);
     }

     ALOGW_IF(error != GRALLOC1_ERROR_NONE, "lock(%p, ...) failed: %d", handle,
             error);

     return error;
 }

 static inline bool isValidYCbCrPlane(const android_flex_plane_t& plane) {
     if (plane.bits_per_component != 8) {
         ALOGV("Invalid number of bits per component: %d",
                 plane.bits_per_component);
         return false;
     }
     if (plane.bits_used != 8) {
         ALOGV("Invalid number of bits used: %d", plane.bits_used);
         return false;
     }

     bool hasValidIncrement = plane.h_increment == 1 ||
             (plane.component != FLEX_COMPONENT_Y && plane.h_increment == 2);
     hasValidIncrement = hasValidIncrement && plane.v_increment > 0;
     if (!hasValidIncrement) {
         ALOGV("Invalid increment: h %d v %d", plane.h_increment,
                 plane.v_increment);
         return false;
     }

     return true;
 }

 status_t GraphicBufferMapper::lockAsyncYCbCr(buffer_handle_t handle,
         uint32_t usage, const Rect& bounds, android_ycbcr *ycbcr, int fenceFd)
 {
     ATRACE_CALL();

     gralloc1_rect_t accessRegion = asGralloc1Rect(bounds);

     std::vector<android_flex_plane_t> planes;
     android_flex_layout_t flexLayout{};
     gralloc1_error_t error;

     if (mMapper->valid()) {
         const Gralloc2::IMapper::Rect& accessRect =
             *reinterpret_cast<Gralloc2::IMapper::Rect*>(&accessRegion);
         Gralloc2::FlexLayout layout{};
         error = static_cast<gralloc1_error_t>(mMapper->lock(
                     handle, usage, usage, accessRect, fenceFd, &layout));

         if (error == GRALLOC1_ERROR_NONE) {
             planes.resize(layout.planes.size());
             memcpy(planes.data(), layout.planes.data(),
                     sizeof(planes[0]) * planes.size());

             flexLayout.format = static_cast<android_flex_format_t>(
                     layout.format);
             flexLayout.num_planes = static_cast<uint32_t>(planes.size());
             flexLayout.planes = planes.data();
         }
     } else {
         sp<Fence> fence = new Fence(fenceFd);

         if (mDevice->hasCapability(GRALLOC1_CAPABILITY_ON_ADAPTER)) {
             error = mDevice->lockYCbCr(handle,
                     static_cast<gralloc1_producer_usage_t>(usage),
                     static_cast<gralloc1_consumer_usage_t>(usage),
                     &accessRegion, ycbcr, fence);
             ALOGW_IF(error != GRALLOC1_ERROR_NONE,
                     "lockYCbCr(%p, ...) failed: %d", handle, error);
             return error;
         }

         uint32_t numPlanes = 0;
         error = mDevice->getNumFlexPlanes(handle, &numPlanes);

         if (error != GRALLOC1_ERROR_NONE) {
             ALOGV("Failed to retrieve number of flex planes: %d", error);
             return error;
         }
         if (numPlanes < 3) {
             ALOGV("Not enough planes for YCbCr (%u found)", numPlanes);
             return GRALLOC1_ERROR_UNSUPPORTED;
         }

         planes.resize(numPlanes);
         flexLayout.num_planes = numPlanes;
         flexLayout.planes = planes.data();

         error = mDevice->lockFlex(handle,
                 static_cast<gralloc1_producer_usage_t>(usage),
                 static_cast<gralloc1_consumer_usage_t>(usage),
                 &accessRegion, &flexLayout, fence);
     }

     if (error != GRALLOC1_ERROR_NONE) {
         ALOGW("lockFlex(%p, ...) failed: %d", handle, error);
         return error;
     }
     if (flexLayout.format != FLEX_FORMAT_YCbCr) {
         ALOGV("Unable to convert flex-format buffer to YCbCr");
         unlock(handle);
         return GRALLOC1_ERROR_UNSUPPORTED;
     }

     // Find planes
     auto yPlane = planes.cend();
     auto cbPlane = planes.cend();
     auto crPlane = planes.cend();
     for (auto planeIter = planes.cbegin(); planeIter != planes.cend();
             ++planeIter) {
         if (planeIter->component == FLEX_COMPONENT_Y) {
             yPlane = planeIter;
         } else if (planeIter->component == FLEX_COMPONENT_Cb) {
             cbPlane = planeIter;
         } else if (planeIter->component == FLEX_COMPONENT_Cr) {
             crPlane = planeIter;
         }
     }
     if (yPlane == planes.cend()) {
         ALOGV("Unable to find Y plane");
         unlock(handle);
         return GRALLOC1_ERROR_UNSUPPORTED;
     }
     if (cbPlane == planes.cend()) {
         ALOGV("Unable to find Cb plane");
         unlock(handle);
         return GRALLOC1_ERROR_UNSUPPORTED;
     }
     if (crPlane == planes.cend()) {
         ALOGV("Unable to find Cr plane");
         unlock(handle);
         return GRALLOC1_ERROR_UNSUPPORTED;
     }

     // Validate planes
     if (!isValidYCbCrPlane(*yPlane)) {
         ALOGV("Y plane is invalid");
         unlock(handle);
         return GRALLOC1_ERROR_UNSUPPORTED;
     }
     if (!isValidYCbCrPlane(*cbPlane)) {
         ALOGV("Cb plane is invalid");
         unlock(handle);
         return GRALLOC1_ERROR_UNSUPPORTED;
     }
     if (!isValidYCbCrPlane(*crPlane)) {
         ALOGV("Cr plane is invalid");
         unlock(handle);
         return GRALLOC1_ERROR_UNSUPPORTED;
     }
     if (cbPlane->v_increment != crPlane->v_increment) {
         ALOGV("Cb and Cr planes have different step (%d vs. %d)",
                 cbPlane->v_increment, crPlane->v_increment);
         unlock(handle);
         return GRALLOC1_ERROR_UNSUPPORTED;
     }
     if (cbPlane->h_increment != crPlane->h_increment) {
         ALOGV("Cb and Cr planes have different stride (%d vs. %d)",
                 cbPlane->h_increment, crPlane->h_increment);
         unlock(handle);
         return GRALLOC1_ERROR_UNSUPPORTED;
     }

     // Pack plane data into android_ycbcr struct
     ycbcr->y = yPlane->top_left;
     ycbcr->cb = cbPlane->top_left;
     ycbcr->cr = crPlane->top_left;
     ycbcr->ystride = static_cast<size_t>(yPlane->v_increment);
     ycbcr->cstride = static_cast<size_t>(cbPlane->v_increment);
     ycbcr->chroma_step = static_cast<size_t>(cbPlane->h_increment);

     return error;
 }

 status_t GraphicBufferMapper::unlockAsync(buffer_handle_t handle, int *fenceFd)
 {
     ATRACE_CALL();

     gralloc1_error_t error;
     if (mMapper->valid()) {
         *fenceFd = mMapper->unlock(handle);
         error = GRALLOC1_ERROR_NONE;
     } else {
         sp<Fence> fence = Fence::NO_FENCE;
         error = mDevice->unlock(handle, &fence);
         if (error != GRALLOC1_ERROR_NONE) {
             ALOGE("unlock(%p) failed: %d", handle, error);
             return error;
         }

         *fenceFd = fence->dup();
     }
     return error;
 }

 // ---------------------------------------------------------------------------
 }; // namespace android
	/*
	* Copyright (C) 2007 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#define LOG_TAG "GraphicBufferMapper"
	#define ATRACE_TAG ATRACE_TAG_GRAPHICS
	//#define LOG_NDEBUG 0

	#include <ui/GraphicBufferMapper.h>

	// We would eliminate the non-conforming zero-length array, but we can't since
	// this is effectively included from the Linux kernel
	#pragma clang diagnostic push
	#pragma clang diagnostic ignored "-Wzero-length-array"
	#include <sync/sync.h>
	#pragma clang diagnostic pop

	#include <utils/Log.h>
	#include <utils/Trace.h>

	#include <ui/GrallocMapper.h>
	#include <ui/GraphicBuffer.h>

	#include <system/graphics.h>

	namespace android {
	// ---------------------------------------------------------------------------

	ANDROID_SINGLETON_STATIC_INSTANCE( GraphicBufferMapper )

	GraphicBufferMapper::GraphicBufferMapper()
	: mMapper(std::make_unique<const Gralloc2::Mapper>())
	{
	if (!mMapper->valid()) {
	mLoader = std::make_unique<Gralloc1::Loader>();
	mDevice = mLoader->getDevice();
	}
	}



	status_t GraphicBufferMapper::registerBuffer(buffer_handle_t handle)
	{
	ATRACE_CALL();

	gralloc1_error_t error;
	if (mMapper->valid()) {
	error = static_cast<gralloc1_error_t>(mMapper->retain(handle));
	} else {
	// This always returns GRALLOC1_BAD_HANDLE when handle is from a
	// remote process and mDevice is backed by Gralloc1On0Adapter.
	error = mDevice->retain(handle);
	if (error == GRALLOC1_ERROR_BAD_HANDLE &&
	mDevice->hasCapability(GRALLOC1_CAPABILITY_ON_ADAPTER)) {
	ALOGE("registerBuffer by handle is not supported with "
	"Gralloc1On0Adapter");
	}
	}

	ALOGW_IF(error != GRALLOC1_ERROR_NONE, "registerBuffer(%p) failed: %d",
	handle, error);

	return error;
	}

	status_t GraphicBufferMapper::registerBuffer(const GraphicBuffer* buffer)
	{
	ATRACE_CALL();

	gralloc1_error_t error;
	if (mMapper->valid()) {
	error = static_cast<gralloc1_error_t>(
	mMapper->retain(buffer->getNativeBuffer()->handle));
	} else {
	error = mDevice->retain(buffer);
	}

	ALOGW_IF(error != GRALLOC1_ERROR_NONE, "registerBuffer(%p) failed: %d",
	buffer->getNativeBuffer()->handle, error);

	return error;
	}

	status_t GraphicBufferMapper::unregisterBuffer(buffer_handle_t handle)
	{
	ATRACE_CALL();

	gralloc1_error_t error;
	if (mMapper->valid()) {
	mMapper->release(handle);
	error = GRALLOC1_ERROR_NONE;
	} else {
	error = mDevice->release(handle);
	}

	ALOGW_IF(error != GRALLOC1_ERROR_NONE, "unregisterBuffer(%p): failed %d",
	handle, error);

	return error;
	}

	static inline gralloc1_rect_t asGralloc1Rect(const Rect& rect) {
	gralloc1_rect_t outRect{};
	outRect.left = rect.left;
	outRect.top = rect.top;
	outRect.width = rect.width();
	outRect.height = rect.height();
	return outRect;
	}


	status_t GraphicBufferMapper::getDimensions(buffer_handle_t handle,
	uint32_t* outWidth, uint32_t* outHeight) const
	{
	ATRACE_CALL();

	gralloc1_error_t error;
	if (mMapper->valid()) {
	mMapper->getDimensions(handle, outWidth, outHeight);
	error = GRALLOC1_ERROR_NONE;
	} else {
	error = mDevice->getDimensions(handle, outWidth, outHeight);
	}

	ALOGW_IF(error != GRALLOC1_ERROR_NONE, "getDimensions(%p, ...): failed %d",
	handle, error);

	return error;
	}

	status_t GraphicBufferMapper::getFormat(buffer_handle_t handle,
	int32_t* outFormat) const
	{
	ATRACE_CALL();

	gralloc1_error_t error;
	if (mMapper->valid()) {
	mMapper->getFormat(handle, outFormat);
	error = GRALLOC1_ERROR_NONE;
	} else {
	error = mDevice->getFormat(handle, outFormat);
	}

	ALOGW_IF(error != GRALLOC1_ERROR_NONE, "getFormat(%p, ...): failed %d",
	handle, error);

	return error;
	}

	status_t GraphicBufferMapper::getLayerCount(buffer_handle_t handle,
	uint32_t* outLayerCount) const
	{
	ATRACE_CALL();

	gralloc1_error_t error;
	if (mMapper->valid()) {
	mMapper->getLayerCount(handle, outLayerCount);
	error = GRALLOC1_ERROR_NONE;
	} else {
	error = mDevice->getLayerCount(handle, outLayerCount);
	}

	ALOGW_IF(error != GRALLOC1_ERROR_NONE, "getLayerCount(%p, ...): failed %d",
	handle, error);

	return error;
	}

	status_t GraphicBufferMapper::getProducerUsage(buffer_handle_t handle,
	uint64_t* outProducerUsage) const
	{
	ATRACE_CALL();

	gralloc1_error_t error;
	if (mMapper->valid()) {
	mMapper->getProducerUsage(handle, outProducerUsage);
	error = GRALLOC1_ERROR_NONE;
	} else {
	error = mDevice->getProducerUsage(handle, outProducerUsage);
	}

	ALOGW_IF(error != GRALLOC1_ERROR_NONE,
	"getProducerUsage(%p, ...): failed %d", handle, error);

	return error;
	}

	status_t GraphicBufferMapper::getConsumerUsage(buffer_handle_t handle,
	uint64_t* outConsumerUsage) const
	{
	ATRACE_CALL();

	gralloc1_error_t error;
	if (mMapper->valid()) {
	mMapper->getConsumerUsage(handle, outConsumerUsage);
	error = GRALLOC1_ERROR_NONE;
	} else {
	error = mDevice->getConsumerUsage(handle, outConsumerUsage);
	}

	ALOGW_IF(error != GRALLOC1_ERROR_NONE,
	"getConsumerUsage(%p, ...): failed %d", handle, error);

	return error;
	}

	status_t GraphicBufferMapper::getBackingStore(buffer_handle_t handle,
	uint64_t* outBackingStore) const
	{
	ATRACE_CALL();

	gralloc1_error_t error;
	if (mMapper->valid()) {
	mMapper->getBackingStore(handle, outBackingStore);
	error = GRALLOC1_ERROR_NONE;
	} else {
	error = mDevice->getBackingStore(handle, outBackingStore);
	}

	ALOGW_IF(error != GRALLOC1_ERROR_NONE,
	"getBackingStore(%p, ...): failed %d", handle, error);

	return error;
	}

	status_t GraphicBufferMapper::getStride(buffer_handle_t handle,
	uint32_t* outStride) const
	{
	ATRACE_CALL();

	gralloc1_error_t error;
	if (mMapper->valid()) {
	mMapper->getStride(handle, outStride);
	error = GRALLOC1_ERROR_NONE;
	} else {
	error = mDevice->getStride(handle, outStride);
	}

	ALOGW_IF(error != GRALLOC1_ERROR_NONE, "getStride(%p, ...): failed %d",
	handle, error);

	return error;
	}

	status_t GraphicBufferMapper::lock(buffer_handle_t handle, uint32_t usage,
	const Rect& bounds, void** vaddr)
	{
	return lockAsync(handle, usage, bounds, vaddr, -1);
	}

	status_t GraphicBufferMapper::lockYCbCr(buffer_handle_t handle, uint32_t usage,
	const Rect& bounds, android_ycbcr *ycbcr)
	{
	return lockAsyncYCbCr(handle, usage, bounds, ycbcr, -1);
	}

	status_t GraphicBufferMapper::unlock(buffer_handle_t handle)
	{
	int32_t fenceFd = -1;
	status_t error = unlockAsync(handle, &fenceFd);
	if (error == NO_ERROR) {
	sync_wait(fenceFd, -1);
	close(fenceFd);
	}
	return error;
	}

	status_t GraphicBufferMapper::lockAsync(buffer_handle_t handle,
	uint32_t usage, const Rect& bounds, void** vaddr, int fenceFd)
	{
	return lockAsync(handle, usage, usage, bounds, vaddr, fenceFd);
	}

	status_t GraphicBufferMapper::lockAsync(buffer_handle_t handle,
	uint64_t producerUsage, uint64_t consumerUsage, const Rect& bounds,
	void** vaddr, int fenceFd)
	{
	ATRACE_CALL();

	gralloc1_rect_t accessRegion = asGralloc1Rect(bounds);
	gralloc1_error_t error;
	if (mMapper->valid()) {
	const Gralloc2::IMapper::Rect& accessRect =
	reinterpret_cast<Gralloc2::IMapper::Rect>(&accessRegion);
	error = static_cast<gralloc1_error_t>(mMapper->lock(
	handle, producerUsage, consumerUsage, accessRect,
	fenceFd, vaddr));
	} else {
	sp<Fence> fence = new Fence(fenceFd);
	error = mDevice->lock(handle,
	static_cast<gralloc1_producer_usage_t>(producerUsage),
	static_cast<gralloc1_consumer_usage_t>(consumerUsage),
	&accessRegion, vaddr, fence);
	}

	ALOGW_IF(error != GRALLOC1_ERROR_NONE, "lock(%p, ...) failed: %d", handle,
	error);

	return error;
	}

	static inline bool isValidYCbCrPlane(const android_flex_plane_t& plane) {
	if (plane.bits_per_component != 8) {
	ALOGV("Invalid number of bits per component: %d",
	plane.bits_per_component);
	return false;
	}
	if (plane.bits_used != 8) {
	ALOGV("Invalid number of bits used: %d", plane.bits_used);
	return false;
	}

	bool hasValidIncrement = plane.h_increment == 1 \|\|
	(plane.component != FLEX_COMPONENT_Y && plane.h_increment == 2);
	hasValidIncrement = hasValidIncrement && plane.v_increment > 0;
	if (!hasValidIncrement) {
	ALOGV("Invalid increment: h %d v %d", plane.h_increment,
	plane.v_increment);
	return false;
	}

	return true;
	}

	status_t GraphicBufferMapper::lockAsyncYCbCr(buffer_handle_t handle,
	uint32_t usage, const Rect& bounds, android_ycbcr *ycbcr, int fenceFd)
	{
	ATRACE_CALL();

	gralloc1_rect_t accessRegion = asGralloc1Rect(bounds);

	std::vector<android_flex_plane_t> planes;
	android_flex_layout_t flexLayout{};
	gralloc1_error_t error;

	if (mMapper->valid()) {
	const Gralloc2::IMapper::Rect& accessRect =
	reinterpret_cast<Gralloc2::IMapper::Rect>(&accessRegion);
	Gralloc2::FlexLayout layout{};
	error = static_cast<gralloc1_error_t>(mMapper->lock(
	handle, usage, usage, accessRect, fenceFd, &layout));

	if (error == GRALLOC1_ERROR_NONE) {
	planes.resize(layout.planes.size());
	memcpy(planes.data(), layout.planes.data(),
	sizeof(planes[0]) * planes.size());

	flexLayout.format = static_cast<android_flex_format_t>(
	layout.format);
	flexLayout.num_planes = static_cast<uint32_t>(planes.size());
	flexLayout.planes = planes.data();
	}
	} else {
	sp<Fence> fence = new Fence(fenceFd);

	if (mDevice->hasCapability(GRALLOC1_CAPABILITY_ON_ADAPTER)) {
	error = mDevice->lockYCbCr(handle,
	static_cast<gralloc1_producer_usage_t>(usage),
	static_cast<gralloc1_consumer_usage_t>(usage),
	&accessRegion, ycbcr, fence);
	ALOGW_IF(error != GRALLOC1_ERROR_NONE,
	"lockYCbCr(%p, ...) failed: %d", handle, error);
	return error;
	}

	uint32_t numPlanes = 0;
	error = mDevice->getNumFlexPlanes(handle, &numPlanes);

	if (error != GRALLOC1_ERROR_NONE) {
	ALOGV("Failed to retrieve number of flex planes: %d", error);
	return error;
	}
	if (numPlanes < 3) {
	ALOGV("Not enough planes for YCbCr (%u found)", numPlanes);
	return GRALLOC1_ERROR_UNSUPPORTED;
	}

	planes.resize(numPlanes);
	flexLayout.num_planes = numPlanes;
	flexLayout.planes = planes.data();

	error = mDevice->lockFlex(handle,
	static_cast<gralloc1_producer_usage_t>(usage),
	static_cast<gralloc1_consumer_usage_t>(usage),
	&accessRegion, &flexLayout, fence);
	}

	if (error != GRALLOC1_ERROR_NONE) {
	ALOGW("lockFlex(%p, ...) failed: %d", handle, error);
	return error;
	}
	if (flexLayout.format != FLEX_FORMAT_YCbCr) {
	ALOGV("Unable to convert flex-format buffer to YCbCr");
	unlock(handle);
	return GRALLOC1_ERROR_UNSUPPORTED;
	}

	// Find planes
	auto yPlane = planes.cend();
	auto cbPlane = planes.cend();
	auto crPlane = planes.cend();
	for (auto planeIter = planes.cbegin(); planeIter != planes.cend();
	++planeIter) {
	if (planeIter->component == FLEX_COMPONENT_Y) {
	yPlane = planeIter;
	} else if (planeIter->component == FLEX_COMPONENT_Cb) {
	cbPlane = planeIter;
	} else if (planeIter->component == FLEX_COMPONENT_Cr) {
	crPlane = planeIter;
	}
	}
	if (yPlane == planes.cend()) {
	ALOGV("Unable to find Y plane");
	unlock(handle);
	return GRALLOC1_ERROR_UNSUPPORTED;
	}
	if (cbPlane == planes.cend()) {
	ALOGV("Unable to find Cb plane");
	unlock(handle);
	return GRALLOC1_ERROR_UNSUPPORTED;
	}
	if (crPlane == planes.cend()) {
	ALOGV("Unable to find Cr plane");
	unlock(handle);
	return GRALLOC1_ERROR_UNSUPPORTED;
	}

	// Validate planes
	if (!isValidYCbCrPlane(*yPlane)) {
	ALOGV("Y plane is invalid");
	unlock(handle);
	return GRALLOC1_ERROR_UNSUPPORTED;
	}
	if (!isValidYCbCrPlane(*cbPlane)) {
	ALOGV("Cb plane is invalid");
	unlock(handle);
	return GRALLOC1_ERROR_UNSUPPORTED;
	}
	if (!isValidYCbCrPlane(*crPlane)) {
	ALOGV("Cr plane is invalid");
	unlock(handle);
	return GRALLOC1_ERROR_UNSUPPORTED;
	}
	if (cbPlane->v_increment != crPlane->v_increment) {
	ALOGV("Cb and Cr planes have different step (%d vs. %d)",
	cbPlane->v_increment, crPlane->v_increment);
	unlock(handle);
	return GRALLOC1_ERROR_UNSUPPORTED;
	}
	if (cbPlane->h_increment != crPlane->h_increment) {
	ALOGV("Cb and Cr planes have different stride (%d vs. %d)",
	cbPlane->h_increment, crPlane->h_increment);
	unlock(handle);
	return GRALLOC1_ERROR_UNSUPPORTED;
	}

	// Pack plane data into android_ycbcr struct
	ycbcr->y = yPlane->top_left;
	ycbcr->cb = cbPlane->top_left;
	ycbcr->cr = crPlane->top_left;
	ycbcr->ystride = static_cast<size_t>(yPlane->v_increment);
	ycbcr->cstride = static_cast<size_t>(cbPlane->v_increment);
	ycbcr->chroma_step = static_cast<size_t>(cbPlane->h_increment);

	return error;
	}

	status_t GraphicBufferMapper::unlockAsync(buffer_handle_t handle, int *fenceFd)
	{
	ATRACE_CALL();

	gralloc1_error_t error;
	if (mMapper->valid()) {
	*fenceFd = mMapper->unlock(handle);
	error = GRALLOC1_ERROR_NONE;
	} else {
	sp<Fence> fence = Fence::NO_FENCE;
	error = mDevice->unlock(handle, &fence);
	if (error != GRALLOC1_ERROR_NONE) {
	ALOGE("unlock(%p) failed: %d", handle, error);
	return error;
	}

	*fenceFd = fence->dup();
	}
	return error;
	}

	// ---------------------------------------------------------------------------
	}; // namespace android