| /* libs/opengles/primitives.cpp |
| ** |
| ** Copyright 2006, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <math.h> |
| |
| #include "context.h" |
| #include "primitives.h" |
| #include "light.h" |
| #include "matrix.h" |
| #include "vertex.h" |
| #include "fp.h" |
| #include "TextureObjectManager.h" |
| |
| extern "C" void iterators0032(const void* that, |
| int32_t* it, int32_t c0, int32_t c1, int32_t c2); |
| |
| namespace android { |
| |
| // ---------------------------------------------------------------------------- |
| |
| static void primitive_point(ogles_context_t* c, vertex_t* v); |
| static void primitive_line(ogles_context_t* c, vertex_t* v0, vertex_t* v1); |
| static void primitive_clip_triangle(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2); |
| |
| static void primitive_nop_point(ogles_context_t* c, vertex_t* v); |
| static void primitive_nop_line(ogles_context_t* c, vertex_t* v0, vertex_t* v1); |
| static void primitive_nop_triangle(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2); |
| |
| static inline bool cull_triangle(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2); |
| |
| static void lerp_triangle(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2); |
| |
| static void lerp_texcoords(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2); |
| |
| static void lerp_texcoords_w(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2); |
| |
| static void triangle(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2); |
| |
| static void clip_triangle(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2); |
| |
| static unsigned int clip_line(ogles_context_t* c, |
| vertex_t* s, vertex_t* p); |
| |
| // ---------------------------------------------------------------------------- |
| #if 0 |
| #pragma mark - |
| #endif |
| |
| static void lightTriangleDarkSmooth(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2) |
| { |
| if (!(v0->flags & vertex_t::LIT)) { |
| v0->flags |= vertex_t::LIT; |
| const GLvoid* cp = c->arrays.color.element( |
| v0->index & vertex_cache_t::INDEX_MASK); |
| c->arrays.color.fetch(c, v0->color.v, cp); |
| } |
| if (!(v1->flags & vertex_t::LIT)) { |
| v1->flags |= vertex_t::LIT; |
| const GLvoid* cp = c->arrays.color.element( |
| v1->index & vertex_cache_t::INDEX_MASK); |
| c->arrays.color.fetch(c, v1->color.v, cp); |
| } |
| if(!(v2->flags & vertex_t::LIT)) { |
| v2->flags |= vertex_t::LIT; |
| const GLvoid* cp = c->arrays.color.element( |
| v2->index & vertex_cache_t::INDEX_MASK); |
| c->arrays.color.fetch(c, v2->color.v, cp); |
| } |
| } |
| |
| static void lightTriangleDarkFlat(ogles_context_t* c, |
| vertex_t* /*v0*/, vertex_t* /*v1*/, vertex_t* v2) |
| { |
| if (!(v2->flags & vertex_t::LIT)) { |
| v2->flags |= vertex_t::LIT; |
| const GLvoid* cp = c->arrays.color.element( |
| v2->index & vertex_cache_t::INDEX_MASK); |
| c->arrays.color.fetch(c, v2->color.v, cp); |
| } |
| // configure the rasterizer here, before we clip |
| c->rasterizer.procs.color4xv(c, v2->color.v); |
| } |
| |
| static void lightTriangleSmooth(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2) |
| { |
| if (!(v0->flags & vertex_t::LIT)) |
| c->lighting.lightVertex(c, v0); |
| if (!(v1->flags & vertex_t::LIT)) |
| c->lighting.lightVertex(c, v1); |
| if(!(v2->flags & vertex_t::LIT)) |
| c->lighting.lightVertex(c, v2); |
| } |
| |
| static void lightTriangleFlat(ogles_context_t* c, |
| vertex_t* /*v0*/, vertex_t* /*v1*/, vertex_t* v2) |
| { |
| if (!(v2->flags & vertex_t::LIT)) |
| c->lighting.lightVertex(c, v2); |
| // configure the rasterizer here, before we clip |
| c->rasterizer.procs.color4xv(c, v2->color.v); |
| } |
| |
| // The fog versions... |
| |
| static inline |
| void lightVertexDarkSmoothFog(ogles_context_t* c, vertex_t* v) |
| { |
| if (!(v->flags & vertex_t::LIT)) { |
| v->flags |= vertex_t::LIT; |
| v->fog = c->fog.fog(c, v->eye.z); |
| const GLvoid* cp = c->arrays.color.element( |
| v->index & vertex_cache_t::INDEX_MASK); |
| c->arrays.color.fetch(c, v->color.v, cp); |
| } |
| } |
| static inline |
| void lightVertexDarkFlatFog(ogles_context_t* c, vertex_t* v) |
| { |
| if (!(v->flags & vertex_t::LIT)) { |
| v->flags |= vertex_t::LIT; |
| v->fog = c->fog.fog(c, v->eye.z); |
| } |
| } |
| static inline |
| void lightVertexSmoothFog(ogles_context_t* c, vertex_t* v) |
| { |
| if (!(v->flags & vertex_t::LIT)) { |
| v->fog = c->fog.fog(c, v->eye.z); |
| c->lighting.lightVertex(c, v); |
| } |
| } |
| |
| static void lightTriangleDarkSmoothFog(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2) |
| { |
| lightVertexDarkSmoothFog(c, v0); |
| lightVertexDarkSmoothFog(c, v1); |
| lightVertexDarkSmoothFog(c, v2); |
| } |
| |
| static void lightTriangleDarkFlatFog(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2) |
| { |
| lightVertexDarkFlatFog(c, v0); |
| lightVertexDarkFlatFog(c, v1); |
| lightVertexDarkSmoothFog(c, v2); |
| // configure the rasterizer here, before we clip |
| c->rasterizer.procs.color4xv(c, v2->color.v); |
| } |
| |
| static void lightTriangleSmoothFog(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2) |
| { |
| lightVertexSmoothFog(c, v0); |
| lightVertexSmoothFog(c, v1); |
| lightVertexSmoothFog(c, v2); |
| } |
| |
| static void lightTriangleFlatFog(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2) |
| { |
| lightVertexDarkFlatFog(c, v0); |
| lightVertexDarkFlatFog(c, v1); |
| lightVertexSmoothFog(c, v2); |
| // configure the rasterizer here, before we clip |
| c->rasterizer.procs.color4xv(c, v2->color.v); |
| } |
| |
| |
| |
| typedef void (*light_primitive_t)(ogles_context_t*, |
| vertex_t*, vertex_t*, vertex_t*); |
| |
| // fog 0x4, light 0x2, smooth 0x1 |
| static const light_primitive_t lightPrimitive[8] = { |
| lightTriangleDarkFlat, // no fog | dark | flat |
| lightTriangleDarkSmooth, // no fog | dark | smooth |
| lightTriangleFlat, // no fog | light | flat |
| lightTriangleSmooth, // no fog | light | smooth |
| lightTriangleDarkFlatFog, // fog | dark | flat |
| lightTriangleDarkSmoothFog, // fog | dark | smooth |
| lightTriangleFlatFog, // fog | light | flat |
| lightTriangleSmoothFog // fog | light | smooth |
| }; |
| |
| void ogles_validate_primitives(ogles_context_t* c) |
| { |
| const uint32_t enables = c->rasterizer.state.enables; |
| |
| // set up the lighting/shading/smoothing/fogging function |
| int index = enables & GGL_ENABLE_SMOOTH ? 0x1 : 0; |
| index |= c->lighting.enable ? 0x2 : 0; |
| index |= enables & GGL_ENABLE_FOG ? 0x4 : 0; |
| c->lighting.lightTriangle = lightPrimitive[index]; |
| |
| // set up the primitive renderers |
| if (ggl_likely(c->arrays.vertex.enable)) { |
| c->prims.renderPoint = primitive_point; |
| c->prims.renderLine = primitive_line; |
| c->prims.renderTriangle = primitive_clip_triangle; |
| } else { |
| c->prims.renderPoint = primitive_nop_point; |
| c->prims.renderLine = primitive_nop_line; |
| c->prims.renderTriangle = primitive_nop_triangle; |
| } |
| } |
| |
| // ---------------------------------------------------------------------------- |
| |
| void compute_iterators_t::initTriangle( |
| vertex_t const* v0, vertex_t const* v1, vertex_t const* v2) |
| { |
| m_dx01 = v1->window.x - v0->window.x; |
| m_dy10 = v0->window.y - v1->window.y; |
| m_dx20 = v0->window.x - v2->window.x; |
| m_dy02 = v2->window.y - v0->window.y; |
| m_area = m_dx01*m_dy02 + (-m_dy10)*m_dx20; |
| (void)m_reserved; // suppress unused warning |
| } |
| |
| void compute_iterators_t::initLine( |
| vertex_t const* v0, vertex_t const* v1) |
| { |
| m_dx01 = m_dy02 = v1->window.x - v0->window.x; |
| m_dy10 = m_dx20 = v0->window.y - v1->window.y; |
| m_area = m_dx01*m_dy02 + (-m_dy10)*m_dx20; |
| } |
| |
| void compute_iterators_t::initLerp(vertex_t const* v0, uint32_t enables) |
| { |
| m_x0 = v0->window.x; |
| m_y0 = v0->window.y; |
| const GGLcoord area = (m_area + TRI_HALF) >> TRI_FRACTION_BITS; |
| const GGLcoord minArea = 2; // cannot be inverted |
| // triangles with an area smaller than 1.0 are not smooth-shaded |
| |
| int q=0, s=0, d=0; |
| if (abs(area) >= minArea) { |
| // Here we do some voodoo magic, to compute a suitable scale |
| // factor for deltas/area: |
| |
| // First compute the 1/area with full 32-bits precision, |
| // gglRecipQNormalized returns a number [-0.5, 0.5[ and an exponent. |
| d = gglRecipQNormalized(area, &q); |
| |
| // Then compute the minimum left-shift to not overflow the muls |
| // below. |
| s = 32 - gglClz(abs(m_dy02)|abs(m_dy10)|abs(m_dx01)|abs(m_dx20)); |
| |
| // We'll keep 16-bits of precision for deltas/area. So we need |
| // to shift everything left an extra 15 bits. |
| s += 15; |
| |
| // make sure all final shifts are not > 32, because gglMulx |
| // can't handle it. |
| if (s < q) s = q; |
| if (s > 32) { |
| d >>= 32-s; |
| s = 32; |
| } |
| } |
| |
| m_dx01 = gglMulx(m_dx01, d, s); |
| m_dy10 = gglMulx(m_dy10, d, s); |
| m_dx20 = gglMulx(m_dx20, d, s); |
| m_dy02 = gglMulx(m_dy02, d, s); |
| m_area_scale = 32 + q - s; |
| m_scale = 0; |
| |
| if (enables & GGL_ENABLE_TMUS) { |
| const int A = gglClz(abs(m_dy02)|abs(m_dy10)|abs(m_dx01)|abs(m_dx20)); |
| const int B = gglClz(abs(m_x0)|abs(m_y0)); |
| m_scale = max(0, 32 - (A + 16)) + |
| max(0, 32 - (B + TRI_FRACTION_BITS)) + 1; |
| } |
| } |
| |
| int compute_iterators_t::iteratorsScale(GGLfixed* it, |
| int32_t c0, int32_t c1, int32_t c2) const |
| { |
| int32_t dc01 = c1 - c0; |
| int32_t dc02 = c2 - c0; |
| const int A = gglClz(abs(c0)); |
| const int B = gglClz(abs(dc01)|abs(dc02)); |
| const int scale = min(A, B - m_scale) - 2; |
| if (scale >= 0) { |
| c0 <<= scale; |
| dc01 <<= scale; |
| dc02 <<= scale; |
| } else { |
| c0 >>= -scale; |
| dc01 >>= -scale; |
| dc02 >>= -scale; |
| } |
| const int s = m_area_scale; |
| int32_t dcdx = gglMulAddx(dc01, m_dy02, gglMulx(dc02, m_dy10, s), s); |
| int32_t dcdy = gglMulAddx(dc02, m_dx01, gglMulx(dc01, m_dx20, s), s); |
| int32_t c = c0 - (gglMulAddx(dcdx, m_x0, |
| gglMulx(dcdy, m_y0, TRI_FRACTION_BITS), TRI_FRACTION_BITS)); |
| it[0] = c; |
| it[1] = dcdx; |
| it[2] = dcdy; |
| return scale; |
| } |
| |
| void compute_iterators_t::iterators1616(GGLfixed* it, |
| GGLfixed c0, GGLfixed c1, GGLfixed c2) const |
| { |
| const GGLfixed dc01 = c1 - c0; |
| const GGLfixed dc02 = c2 - c0; |
| // 16.16 x 16.16 == 32.32 --> 16.16 |
| const int s = m_area_scale; |
| int32_t dcdx = gglMulAddx(dc01, m_dy02, gglMulx(dc02, m_dy10, s), s); |
| int32_t dcdy = gglMulAddx(dc02, m_dx01, gglMulx(dc01, m_dx20, s), s); |
| int32_t c = c0 - (gglMulAddx(dcdx, m_x0, |
| gglMulx(dcdy, m_y0, TRI_FRACTION_BITS), TRI_FRACTION_BITS)); |
| it[0] = c; |
| it[1] = dcdx; |
| it[2] = dcdy; |
| } |
| |
| void compute_iterators_t::iterators0032(int64_t* it, |
| int32_t c0, int32_t c1, int32_t c2) const |
| { |
| const int s = m_area_scale - 16; |
| int32_t dc01 = (c1 - c0)>>s; |
| int32_t dc02 = (c2 - c0)>>s; |
| // 16.16 x 16.16 == 32.32 |
| int64_t dcdx = gglMulii(dc01, m_dy02) + gglMulii(dc02, m_dy10); |
| int64_t dcdy = gglMulii(dc02, m_dx01) + gglMulii(dc01, m_dx20); |
| it[ 0] = (c0<<16) - ((dcdx*m_x0 + dcdy*m_y0)>>4); |
| it[ 1] = dcdx; |
| it[ 2] = dcdy; |
| } |
| |
| #if defined(__arm__) && !defined(__thumb__) |
| inline void compute_iterators_t::iterators0032(int32_t* it, |
| int32_t c0, int32_t c1, int32_t c2) const |
| { |
| ::iterators0032(this, it, c0, c1, c2); |
| } |
| #else |
| void compute_iterators_t::iterators0032(int32_t* it, |
| int32_t c0, int32_t c1, int32_t c2) const |
| { |
| int64_t it64[3]; |
| iterators0032(it64, c0, c1, c2); |
| it[0] = it64[0]; |
| it[1] = it64[1]; |
| it[2] = it64[2]; |
| } |
| #endif |
| |
| // ---------------------------------------------------------------------------- |
| |
| static inline int32_t clampZ(GLfixed z) CONST; |
| int32_t clampZ(GLfixed z) { |
| z = (z & ~(z>>31)); |
| if (z >= 0x10000) |
| z = 0xFFFF; |
| return z; |
| } |
| |
| static __attribute__((noinline)) |
| void fetch_texcoord_impl(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2) |
| { |
| vertex_t* const vtx[3] = { v0, v1, v2 }; |
| array_t const * const texcoordArray = c->arrays.texture; |
| |
| for (int i=0 ; i<GGL_TEXTURE_UNIT_COUNT ; i++) { |
| if (!(c->rasterizer.state.texture[i].enable)) |
| continue; |
| |
| for (int j=0 ; j<3 ; j++) { |
| vertex_t* const v = vtx[j]; |
| if (v->flags & vertex_t::TT) |
| continue; |
| |
| // NOTE: here we could compute automatic texgen |
| // such as sphere/cube maps, instead of fetching them |
| // from the textcoord array. |
| |
| vec4_t& coords = v->texture[i]; |
| const GLubyte* tp = texcoordArray[i].element( |
| v->index & vertex_cache_t::INDEX_MASK); |
| texcoordArray[i].fetch(c, coords.v, tp); |
| |
| // transform texture coordinates... |
| coords.Q = 0x10000; |
| const transform_t& tr = c->transforms.texture[i].transform; |
| if (ggl_unlikely(tr.ops)) { |
| c->arrays.tex_transform[i](&tr, &coords, &coords); |
| } |
| |
| // divide by Q |
| const GGLfixed q = coords.Q; |
| if (ggl_unlikely(q != 0x10000)) { |
| const int32_t qinv = gglRecip28(q); |
| coords.S = gglMulx(coords.S, qinv, 28); |
| coords.T = gglMulx(coords.T, qinv, 28); |
| } |
| } |
| } |
| v0->flags |= vertex_t::TT; |
| v1->flags |= vertex_t::TT; |
| v2->flags |= vertex_t::TT; |
| } |
| |
| inline void fetch_texcoord(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2) |
| { |
| const uint32_t enables = c->rasterizer.state.enables; |
| if (!(enables & GGL_ENABLE_TMUS)) |
| return; |
| |
| // Fetch & transform texture coordinates... |
| if (ggl_likely(v0->flags & v1->flags & v2->flags & vertex_t::TT)) { |
| // already done for all three vertices, bail... |
| return; |
| } |
| fetch_texcoord_impl(c, v0, v1, v2); |
| } |
| |
| // ---------------------------------------------------------------------------- |
| #if 0 |
| #pragma mark - |
| #pragma mark Point |
| #endif |
| |
| void primitive_nop_point(ogles_context_t*, vertex_t*) { |
| } |
| |
| void primitive_point(ogles_context_t* c, vertex_t* v) |
| { |
| // lighting & clamping... |
| const uint32_t enables = c->rasterizer.state.enables; |
| |
| if (ggl_unlikely(!(v->flags & vertex_t::LIT))) { |
| if (c->lighting.enable) { |
| c->lighting.lightVertex(c, v); |
| } else { |
| v->flags |= vertex_t::LIT; |
| const GLvoid* cp = c->arrays.color.element( |
| v->index & vertex_cache_t::INDEX_MASK); |
| c->arrays.color.fetch(c, v->color.v, cp); |
| } |
| if (enables & GGL_ENABLE_FOG) { |
| v->fog = c->fog.fog(c, v->eye.z); |
| } |
| } |
| |
| // XXX: we don't need to do that each-time |
| // if color array and lighting not enabled |
| c->rasterizer.procs.color4xv(c, v->color.v); |
| |
| // XXX: look into ES point-sprite extension |
| if (enables & GGL_ENABLE_TMUS) { |
| fetch_texcoord(c, v,v,v); |
| for (int i=0 ; i<GGL_TEXTURE_UNIT_COUNT ; i++) { |
| if (!c->rasterizer.state.texture[i].enable) |
| continue; |
| int32_t itt[8]; |
| itt[1] = itt[2] = itt[4] = itt[5] = 0; |
| itt[6] = itt[7] = 16; // XXX: check that |
| if (c->rasterizer.state.texture[i].s_wrap == GGL_CLAMP) { |
| int width = c->textures.tmu[i].texture->surface.width; |
| itt[0] = v->texture[i].S * width; |
| itt[6] = 0; |
| } |
| if (c->rasterizer.state.texture[i].t_wrap == GGL_CLAMP) { |
| int height = c->textures.tmu[i].texture->surface.height; |
| itt[3] = v->texture[i].T * height; |
| itt[7] = 0; |
| } |
| c->rasterizer.procs.texCoordGradScale8xv(c, i, itt); |
| } |
| } |
| |
| if (enables & GGL_ENABLE_DEPTH_TEST) { |
| int32_t itz[3]; |
| itz[0] = clampZ(v->window.z) * 0x00010001; |
| itz[1] = itz[2] = 0; |
| c->rasterizer.procs.zGrad3xv(c, itz); |
| } |
| |
| if (enables & GGL_ENABLE_FOG) { |
| GLfixed itf[3]; |
| itf[0] = v->fog; |
| itf[1] = itf[2] = 0; |
| c->rasterizer.procs.fogGrad3xv(c, itf); |
| } |
| |
| // Render our point... |
| c->rasterizer.procs.pointx(c, v->window.v, c->point.size); |
| } |
| |
| // ---------------------------------------------------------------------------- |
| #if 0 |
| #pragma mark - |
| #pragma mark Line |
| #endif |
| |
| void primitive_nop_line(ogles_context_t*, vertex_t*, vertex_t*) { |
| } |
| |
| void primitive_line(ogles_context_t* c, vertex_t* v0, vertex_t* v1) |
| { |
| // get texture coordinates |
| fetch_texcoord(c, v0, v1, v1); |
| |
| // light/shade the vertices first (they're copied below) |
| c->lighting.lightTriangle(c, v0, v1, v1); |
| |
| // clip the line if needed |
| if (ggl_unlikely((v0->flags | v1->flags) & vertex_t::CLIP_ALL)) { |
| unsigned int count = clip_line(c, v0, v1); |
| if (ggl_unlikely(count == 0)) |
| return; |
| } |
| |
| // compute iterators... |
| const uint32_t enables = c->rasterizer.state.enables; |
| const uint32_t mask = GGL_ENABLE_TMUS | |
| GGL_ENABLE_SMOOTH | |
| GGL_ENABLE_W | |
| GGL_ENABLE_FOG | |
| GGL_ENABLE_DEPTH_TEST; |
| |
| if (ggl_unlikely(enables & mask)) { |
| c->lerp.initLine(v0, v1); |
| lerp_triangle(c, v0, v1, v0); |
| } |
| |
| // render our line |
| c->rasterizer.procs.linex(c, v0->window.v, v1->window.v, c->line.width); |
| } |
| |
| // ---------------------------------------------------------------------------- |
| #if 0 |
| #pragma mark - |
| #pragma mark Triangle |
| #endif |
| |
| void primitive_nop_triangle(ogles_context_t* /*c*/, |
| vertex_t* /*v0*/, vertex_t* /*v1*/, vertex_t* /*v2*/) { |
| } |
| |
| void primitive_clip_triangle(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2) |
| { |
| uint32_t cc = (v0->flags | v1->flags | v2->flags) & vertex_t::CLIP_ALL; |
| if (ggl_likely(!cc)) { |
| // code below must be as optimized as possible, this is the |
| // common code path. |
| |
| // This triangle is not clipped, test if it's culled |
| // unclipped triangle... |
| c->lerp.initTriangle(v0, v1, v2); |
| if (cull_triangle(c, v0, v1, v2)) |
| return; // culled! |
| |
| // Fetch all texture coordinates if needed |
| fetch_texcoord(c, v0, v1, v2); |
| |
| // light (or shade) our triangle! |
| c->lighting.lightTriangle(c, v0, v1, v2); |
| |
| triangle(c, v0, v1, v2); |
| return; |
| } |
| |
| // The assumption here is that we're not going to clip very often, |
| // and even more rarely will we clip a triangle that ends up |
| // being culled out. So it's okay to light the vertices here, even though |
| // in a few cases we won't render the triangle (if culled). |
| |
| // Fetch texture coordinates... |
| fetch_texcoord(c, v0, v1, v2); |
| |
| // light (or shade) our triangle! |
| c->lighting.lightTriangle(c, v0, v1, v2); |
| |
| clip_triangle(c, v0, v1, v2); |
| } |
| |
| // ----------------------------------------------------------------------- |
| |
| void triangle(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2) |
| { |
| // compute iterators... |
| const uint32_t enables = c->rasterizer.state.enables; |
| const uint32_t mask = GGL_ENABLE_TMUS | |
| GGL_ENABLE_SMOOTH | |
| GGL_ENABLE_W | |
| GGL_ENABLE_FOG | |
| GGL_ENABLE_DEPTH_TEST; |
| |
| if (ggl_likely(enables & mask)) |
| lerp_triangle(c, v0, v1, v2); |
| |
| c->rasterizer.procs.trianglex(c, v0->window.v, v1->window.v, v2->window.v); |
| } |
| |
| void lerp_triangle(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2) |
| { |
| const uint32_t enables = c->rasterizer.state.enables; |
| c->lerp.initLerp(v0, enables); |
| |
| // set up texture iterators |
| if (enables & GGL_ENABLE_TMUS) { |
| if (enables & GGL_ENABLE_W) { |
| lerp_texcoords_w(c, v0, v1, v2); |
| } else { |
| lerp_texcoords(c, v0, v1, v2); |
| } |
| } |
| |
| // set up the color iterators |
| const compute_iterators_t& lerp = c->lerp; |
| if (enables & GGL_ENABLE_SMOOTH) { |
| GLfixed itc[12]; |
| for (int i=0 ; i<4 ; i++) { |
| const GGLcolor c0 = v0->color.v[i] * 255; |
| const GGLcolor c1 = v1->color.v[i] * 255; |
| const GGLcolor c2 = v2->color.v[i] * 255; |
| lerp.iterators1616(&itc[i*3], c0, c1, c2); |
| } |
| c->rasterizer.procs.colorGrad12xv(c, itc); |
| } |
| |
| if (enables & GGL_ENABLE_DEPTH_TEST) { |
| int32_t itz[3]; |
| const int32_t v0z = clampZ(v0->window.z); |
| const int32_t v1z = clampZ(v1->window.z); |
| const int32_t v2z = clampZ(v2->window.z); |
| if (ggl_unlikely(c->polygonOffset.enable)) { |
| const int32_t units = (c->polygonOffset.units << 16); |
| const GLfixed factor = c->polygonOffset.factor; |
| if (factor) { |
| int64_t itz64[3]; |
| lerp.iterators0032(itz64, v0z, v1z, v2z); |
| int64_t maxDepthSlope = max(itz64[1], itz64[2]); |
| itz[0] = uint32_t(itz64[0]) |
| + uint32_t((maxDepthSlope*factor)>>16) + units; |
| itz[1] = uint32_t(itz64[1]); |
| itz[2] = uint32_t(itz64[2]); |
| } else { |
| lerp.iterators0032(itz, v0z, v1z, v2z); |
| itz[0] += units; |
| } |
| } else { |
| lerp.iterators0032(itz, v0z, v1z, v2z); |
| } |
| c->rasterizer.procs.zGrad3xv(c, itz); |
| } |
| |
| if (ggl_unlikely(enables & GGL_ENABLE_FOG)) { |
| GLfixed itf[3]; |
| lerp.iterators1616(itf, v0->fog, v1->fog, v2->fog); |
| c->rasterizer.procs.fogGrad3xv(c, itf); |
| } |
| } |
| |
| |
| static inline |
| int compute_lod(ogles_context_t* c, int i, |
| int32_t s0, int32_t t0, int32_t s1, int32_t t1, int32_t s2, int32_t t2) |
| { |
| // Compute mipmap level / primitive |
| // rho = sqrt( texelArea / area ) |
| // lod = log2( rho ) |
| // lod = log2( texelArea / area ) / 2 |
| // lod = (log2( texelArea ) - log2( area )) / 2 |
| const compute_iterators_t& lerp = c->lerp; |
| const GGLcoord area = abs(lerp.area()); |
| const int w = c->textures.tmu[i].texture->surface.width; |
| const int h = c->textures.tmu[i].texture->surface.height; |
| const int shift = 16 + (16 - TRI_FRACTION_BITS); |
| int32_t texelArea = abs( gglMulx(s1-s0, t2-t0, shift) - |
| gglMulx(s2-s0, t1-t0, shift) )*w*h; |
| int log2TArea = (32-TRI_FRACTION_BITS -1) - gglClz(texelArea); |
| int log2Area = (32-TRI_FRACTION_BITS*2-1) - gglClz(area); |
| int lod = (log2TArea - log2Area + 1) >> 1; |
| return lod; |
| } |
| |
| void lerp_texcoords(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2) |
| { |
| const compute_iterators_t& lerp = c->lerp; |
| int32_t itt[8] __attribute__((aligned(16))); |
| for (int i=0 ; i<GGL_TEXTURE_UNIT_COUNT ; i++) { |
| const texture_t& tmu = c->rasterizer.state.texture[i]; |
| if (!tmu.enable) |
| continue; |
| |
| // compute the jacobians using block floating-point |
| int32_t s0 = v0->texture[i].S; |
| int32_t t0 = v0->texture[i].T; |
| int32_t s1 = v1->texture[i].S; |
| int32_t t1 = v1->texture[i].T; |
| int32_t s2 = v2->texture[i].S; |
| int32_t t2 = v2->texture[i].T; |
| |
| const GLenum min_filter = c->textures.tmu[i].texture->min_filter; |
| if (ggl_unlikely(min_filter >= GL_NEAREST_MIPMAP_NEAREST)) { |
| int lod = compute_lod(c, i, s0, t0, s1, t1, s2, t2); |
| c->rasterizer.procs.bindTextureLod(c, i, |
| &c->textures.tmu[i].texture->mip(lod)); |
| } |
| |
| // premultiply (s,t) when clampling |
| if (tmu.s_wrap == GGL_CLAMP) { |
| const int width = tmu.surface.width; |
| s0 *= width; |
| s1 *= width; |
| s2 *= width; |
| } |
| if (tmu.t_wrap == GGL_CLAMP) { |
| const int height = tmu.surface.height; |
| t0 *= height; |
| t1 *= height; |
| t2 *= height; |
| } |
| itt[6] = -lerp.iteratorsScale(itt+0, s0, s1, s2); |
| itt[7] = -lerp.iteratorsScale(itt+3, t0, t1, t2); |
| c->rasterizer.procs.texCoordGradScale8xv(c, i, itt); |
| } |
| } |
| |
| void lerp_texcoords_w(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2) |
| { |
| const compute_iterators_t& lerp = c->lerp; |
| int32_t itt[8] __attribute__((aligned(16))); |
| int32_t itw[3]; |
| |
| // compute W's scale to 2.30 |
| int32_t w0 = v0->window.w; |
| int32_t w1 = v1->window.w; |
| int32_t w2 = v2->window.w; |
| int wscale = 32 - gglClz(w0|w1|w2); |
| |
| // compute the jacobian using block floating-point |
| int sc = lerp.iteratorsScale(itw, w0, w1, w2); |
| sc += wscale - 16; |
| c->rasterizer.procs.wGrad3xv(c, itw); |
| |
| for (int i=0 ; i<GGL_TEXTURE_UNIT_COUNT ; i++) { |
| const texture_t& tmu = c->rasterizer.state.texture[i]; |
| if (!tmu.enable) |
| continue; |
| |
| // compute the jacobians using block floating-point |
| int32_t s0 = v0->texture[i].S; |
| int32_t t0 = v0->texture[i].T; |
| int32_t s1 = v1->texture[i].S; |
| int32_t t1 = v1->texture[i].T; |
| int32_t s2 = v2->texture[i].S; |
| int32_t t2 = v2->texture[i].T; |
| |
| const GLenum min_filter = c->textures.tmu[i].texture->min_filter; |
| if (ggl_unlikely(min_filter >= GL_NEAREST_MIPMAP_NEAREST)) { |
| int lod = compute_lod(c, i, s0, t0, s1, t1, s2, t2); |
| c->rasterizer.procs.bindTextureLod(c, i, |
| &c->textures.tmu[i].texture->mip(lod)); |
| } |
| |
| // premultiply (s,t) when clampling |
| if (tmu.s_wrap == GGL_CLAMP) { |
| const int width = tmu.surface.width; |
| s0 *= width; |
| s1 *= width; |
| s2 *= width; |
| } |
| if (tmu.t_wrap == GGL_CLAMP) { |
| const int height = tmu.surface.height; |
| t0 *= height; |
| t1 *= height; |
| t2 *= height; |
| } |
| |
| s0 = gglMulx(s0, w0, wscale); |
| t0 = gglMulx(t0, w0, wscale); |
| s1 = gglMulx(s1, w1, wscale); |
| t1 = gglMulx(t1, w1, wscale); |
| s2 = gglMulx(s2, w2, wscale); |
| t2 = gglMulx(t2, w2, wscale); |
| |
| itt[6] = sc - lerp.iteratorsScale(itt+0, s0, s1, s2); |
| itt[7] = sc - lerp.iteratorsScale(itt+3, t0, t1, t2); |
| c->rasterizer.procs.texCoordGradScale8xv(c, i, itt); |
| } |
| } |
| |
| |
| static inline |
| bool cull_triangle(ogles_context_t* c, vertex_t* /*v0*/, vertex_t* /*v1*/, vertex_t* /*v2*/) |
| { |
| if (ggl_likely(c->cull.enable)) { |
| const GLenum winding = (c->lerp.area() > 0) ? GL_CW : GL_CCW; |
| const GLenum face = (winding == c->cull.frontFace) ? GL_FRONT : GL_BACK; |
| if (face == c->cull.cullFace) |
| return true; // culled! |
| } |
| return false; |
| } |
| |
| static inline |
| GLfixed frustumPlaneDist(int plane, const vec4_t& s) |
| { |
| const GLfixed d = s.v[ plane >> 1 ]; |
| return ((plane & 1) ? (s.w - d) : (s.w + d)); |
| } |
| |
| static inline |
| int32_t clipDivide(GLfixed a, GLfixed b) { |
| // returns a 4.28 fixed-point |
| return gglMulDivi(1LU<<28, a, b); |
| } |
| |
| void clip_triangle(ogles_context_t* c, |
| vertex_t* v0, vertex_t* v1, vertex_t* v2) |
| { |
| uint32_t all_cc = (v0->flags | v1->flags | v2->flags) & vertex_t::CLIP_ALL; |
| |
| vertex_t *p0, *p1, *p2; |
| const int MAX_CLIPPING_PLANES = 6 + OGLES_MAX_CLIP_PLANES; |
| const int MAX_VERTICES = 3; |
| |
| // Temporary buffer to hold the new vertices. Each plane can add up to |
| // two new vertices (because the polygon is convex). |
| // We need one extra element, to handle an overflow case when |
| // the polygon degenerates into something non convex. |
| vertex_t buffer[MAX_CLIPPING_PLANES * 2 + 1]; // ~3KB |
| vertex_t* buf = buffer; |
| |
| // original list of vertices (polygon to clip, in fact this |
| // function works with an arbitrary polygon). |
| vertex_t* in[3] = { v0, v1, v2 }; |
| |
| // output lists (we need 2, which we use back and forth) |
| // (maximum outpout list's size is MAX_CLIPPING_PLANES + MAX_VERTICES) |
| // 2 more elements for overflow when non convex polygons. |
| vertex_t* out[2][MAX_CLIPPING_PLANES + MAX_VERTICES + 2]; |
| unsigned int outi = 0; |
| |
| // current input list |
| vertex_t** ivl = in; |
| |
| // 3 input vertices, 0 in the output list, first plane |
| unsigned int ic = 3; |
| |
| // User clip-planes first, the clipping is always done in eye-coordinate |
| // this is basically the same algorithm than for the view-volume |
| // clipping, except for the computation of the distance (vertex, plane) |
| // and the fact that we need to compute the eye-coordinates of each |
| // new vertex we create. |
| |
| if (ggl_unlikely(all_cc & vertex_t::USER_CLIP_ALL)) |
| { |
| unsigned int plane = 0; |
| uint32_t cc = (all_cc & vertex_t::USER_CLIP_ALL) >> 8; |
| do { |
| if (cc & 1) { |
| // pointers to our output list (head and current) |
| vertex_t** const ovl = &out[outi][0]; |
| vertex_t** output = ovl; |
| unsigned int oc = 0; |
| unsigned int sentinel = 0; |
| // previous vertex, compute distance to the plane |
| vertex_t* s = ivl[ic-1]; |
| const vec4_t& equation = c->clipPlanes.plane[plane].equation; |
| GLfixed sd = dot4(equation.v, s->eye.v); |
| // clip each vertex against this plane... |
| for (unsigned int i=0 ; i<ic ; i++) { |
| vertex_t* p = ivl[i]; |
| const GLfixed pd = dot4(equation.v, p->eye.v); |
| if (sd >= 0) { |
| if (pd >= 0) { |
| // both inside |
| *output++ = p; |
| oc++; |
| } else { |
| // s inside, p outside (exiting) |
| const GLfixed t = clipDivide(sd, sd-pd); |
| c->arrays.clipEye(c, buf, t, p, s); |
| *output++ = buf++; |
| oc++; |
| if (++sentinel >= 3) |
| return; // non-convex polygon! |
| } |
| } else { |
| if (pd >= 0) { |
| // s outside (entering) |
| if (pd) { |
| const GLfixed t = clipDivide(pd, pd-sd); |
| c->arrays.clipEye(c, buf, t, s, p); |
| *output++ = buf++; |
| oc++; |
| if (++sentinel >= 3) |
| return; // non-convex polygon! |
| } |
| *output++ = p; |
| oc++; |
| } else { |
| // both outside |
| } |
| } |
| s = p; |
| sd = pd; |
| } |
| // output list become the new input list |
| if (oc<3) |
| return; // less than 3 vertices left? we're done! |
| ivl = ovl; |
| ic = oc; |
| outi = 1-outi; |
| } |
| cc >>= 1; |
| plane++; |
| } while (cc); |
| } |
| |
| // frustum clip-planes |
| if (all_cc & vertex_t::FRUSTUM_CLIP_ALL) |
| { |
| unsigned int plane = 0; |
| uint32_t cc = all_cc & vertex_t::FRUSTUM_CLIP_ALL; |
| do { |
| if (cc & 1) { |
| // pointers to our output list (head and current) |
| vertex_t** const ovl = &out[outi][0]; |
| vertex_t** output = ovl; |
| unsigned int oc = 0; |
| unsigned int sentinel = 0; |
| // previous vertex, compute distance to the plane |
| vertex_t* s = ivl[ic-1]; |
| GLfixed sd = frustumPlaneDist(plane, s->clip); |
| // clip each vertex against this plane... |
| for (unsigned int i=0 ; i<ic ; i++) { |
| vertex_t* p = ivl[i]; |
| const GLfixed pd = frustumPlaneDist(plane, p->clip); |
| if (sd >= 0) { |
| if (pd >= 0) { |
| // both inside |
| *output++ = p; |
| oc++; |
| } else { |
| // s inside, p outside (exiting) |
| const GLfixed t = clipDivide(sd, sd-pd); |
| c->arrays.clipVertex(c, buf, t, p, s); |
| *output++ = buf++; |
| oc++; |
| if (++sentinel >= 3) |
| return; // non-convex polygon! |
| } |
| } else { |
| if (pd >= 0) { |
| // s outside (entering) |
| if (pd) { |
| const GLfixed t = clipDivide(pd, pd-sd); |
| c->arrays.clipVertex(c, buf, t, s, p); |
| *output++ = buf++; |
| oc++; |
| if (++sentinel >= 3) |
| return; // non-convex polygon! |
| } |
| *output++ = p; |
| oc++; |
| } else { |
| // both outside |
| } |
| } |
| s = p; |
| sd = pd; |
| } |
| // output list become the new input list |
| if (oc<3) |
| return; // less than 3 vertices left? we're done! |
| ivl = ovl; |
| ic = oc; |
| outi = 1-outi; |
| } |
| cc >>= 1; |
| plane++; |
| } while (cc); |
| } |
| |
| // finally we can render our triangles... |
| p0 = ivl[0]; |
| p1 = ivl[1]; |
| for (unsigned int i=2 ; i<ic ; i++) { |
| p2 = ivl[i]; |
| c->lerp.initTriangle(p0, p1, p2); |
| if (cull_triangle(c, p0, p1, p2)) { |
| p1 = p2; |
| continue; // culled! |
| } |
| triangle(c, p0, p1, p2); |
| p1 = p2; |
| } |
| } |
| |
| unsigned int clip_line(ogles_context_t* c, vertex_t* s, vertex_t* p) |
| { |
| const uint32_t all_cc = (s->flags | p->flags) & vertex_t::CLIP_ALL; |
| |
| if (ggl_unlikely(all_cc & vertex_t::USER_CLIP_ALL)) |
| { |
| unsigned int plane = 0; |
| uint32_t cc = (all_cc & vertex_t::USER_CLIP_ALL) >> 8; |
| do { |
| if (cc & 1) { |
| const vec4_t& equation = c->clipPlanes.plane[plane].equation; |
| const GLfixed sd = dot4(equation.v, s->eye.v); |
| const GLfixed pd = dot4(equation.v, p->eye.v); |
| if (sd >= 0) { |
| if (pd >= 0) { |
| // both inside |
| } else { |
| // s inside, p outside (exiting) |
| const GLfixed t = clipDivide(sd, sd-pd); |
| c->arrays.clipEye(c, p, t, p, s); |
| } |
| } else { |
| if (pd >= 0) { |
| // s outside (entering) |
| if (pd) { |
| const GLfixed t = clipDivide(pd, pd-sd); |
| c->arrays.clipEye(c, s, t, s, p); |
| } |
| } else { |
| // both outside |
| return 0; |
| } |
| } |
| } |
| cc >>= 1; |
| plane++; |
| } while (cc); |
| } |
| |
| // frustum clip-planes |
| if (all_cc & vertex_t::FRUSTUM_CLIP_ALL) |
| { |
| unsigned int plane = 0; |
| uint32_t cc = all_cc & vertex_t::FRUSTUM_CLIP_ALL; |
| do { |
| if (cc & 1) { |
| const GLfixed sd = frustumPlaneDist(plane, s->clip); |
| const GLfixed pd = frustumPlaneDist(plane, p->clip); |
| if (sd >= 0) { |
| if (pd >= 0) { |
| // both inside |
| } else { |
| // s inside, p outside (exiting) |
| const GLfixed t = clipDivide(sd, sd-pd); |
| c->arrays.clipVertex(c, p, t, p, s); |
| } |
| } else { |
| if (pd >= 0) { |
| // s outside (entering) |
| if (pd) { |
| const GLfixed t = clipDivide(pd, pd-sd); |
| c->arrays.clipVertex(c, s, t, s, p); |
| } |
| } else { |
| // both outside |
| return 0; |
| } |
| } |
| } |
| cc >>= 1; |
| plane++; |
| } while (cc); |
| } |
| |
| return 2; |
| } |
| |
| |
| }; // namespace android |