| /* |
| ** Copyright 2016, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| |
| #include <algorithm> |
| #include <inttypes.h> |
| #include <limits> |
| #include <random> |
| #include <regex> |
| #include <selinux/android.h> |
| #include <selinux/avc.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/capability.h> |
| #include <sys/prctl.h> |
| #include <sys/stat.h> |
| #include <sys/wait.h> |
| |
| #include <android-base/logging.h> |
| #include <android-base/macros.h> |
| #include <android-base/stringprintf.h> |
| #include <android-base/strings.h> |
| #include <art_image_values.h> |
| #include <cutils/fs.h> |
| #include <cutils/properties.h> |
| #include <dex2oat_return_codes.h> |
| #include <log/log.h> |
| #include <private/android_filesystem_config.h> |
| |
| #include "dexopt.h" |
| #include "file_parsing.h" |
| #include "globals.h" |
| #include "installd_constants.h" |
| #include "installd_deps.h" // Need to fill in requirements of commands. |
| #include "otapreopt_parameters.h" |
| #include "otapreopt_utils.h" |
| #include "system_properties.h" |
| #include "utils.h" |
| |
| #ifndef LOG_TAG |
| #define LOG_TAG "otapreopt" |
| #endif |
| |
| #define BUFFER_MAX 1024 /* input buffer for commands */ |
| #define TOKEN_MAX 16 /* max number of arguments in buffer */ |
| #define REPLY_MAX 256 /* largest reply allowed */ |
| |
| using android::base::EndsWith; |
| using android::base::Join; |
| using android::base::Split; |
| using android::base::StartsWith; |
| using android::base::StringPrintf; |
| |
| namespace android { |
| namespace installd { |
| |
| // Check expected values for dexopt flags. If you need to change this: |
| // |
| // RUN AN A/B OTA TO MAKE SURE THINGS STILL WORK! |
| // |
| // You most likely need to increase the protocol version and all that entails! |
| |
| static_assert(DEXOPT_PUBLIC == 1 << 1, "DEXOPT_PUBLIC unexpected."); |
| static_assert(DEXOPT_DEBUGGABLE == 1 << 2, "DEXOPT_DEBUGGABLE unexpected."); |
| static_assert(DEXOPT_BOOTCOMPLETE == 1 << 3, "DEXOPT_BOOTCOMPLETE unexpected."); |
| static_assert(DEXOPT_PROFILE_GUIDED == 1 << 4, "DEXOPT_PROFILE_GUIDED unexpected."); |
| static_assert(DEXOPT_SECONDARY_DEX == 1 << 5, "DEXOPT_SECONDARY_DEX unexpected."); |
| static_assert(DEXOPT_FORCE == 1 << 6, "DEXOPT_FORCE unexpected."); |
| static_assert(DEXOPT_STORAGE_CE == 1 << 7, "DEXOPT_STORAGE_CE unexpected."); |
| static_assert(DEXOPT_STORAGE_DE == 1 << 8, "DEXOPT_STORAGE_DE unexpected."); |
| static_assert(DEXOPT_ENABLE_HIDDEN_API_CHECKS == 1 << 10, |
| "DEXOPT_ENABLE_HIDDEN_API_CHECKS unexpected"); |
| static_assert(DEXOPT_GENERATE_COMPACT_DEX == 1 << 11, "DEXOPT_GENERATE_COMPACT_DEX unexpected"); |
| static_assert(DEXOPT_GENERATE_APP_IMAGE == 1 << 12, "DEXOPT_GENERATE_APP_IMAGE unexpected"); |
| |
| static_assert(DEXOPT_MASK == (0x1dfe | DEXOPT_IDLE_BACKGROUND_JOB), |
| "DEXOPT_MASK unexpected."); |
| |
| |
| template<typename T> |
| static constexpr bool IsPowerOfTwo(T x) { |
| static_assert(std::is_integral<T>::value, "T must be integral"); |
| // TODO: assert unsigned. There is currently many uses with signed values. |
| return (x & (x - 1)) == 0; |
| } |
| |
| template<typename T> |
| static constexpr T RoundDown(T x, typename std::decay<T>::type n) { |
| return DCHECK_CONSTEXPR(IsPowerOfTwo(n), , T(0))(x & -n); |
| } |
| |
| template<typename T> |
| static constexpr T RoundUp(T x, typename std::remove_reference<T>::type n) { |
| return RoundDown(x + n - 1, n); |
| } |
| |
| class OTAPreoptService { |
| public: |
| // Main driver. Performs the following steps. |
| // |
| // 1) Parse options (read system properties etc from B partition). |
| // |
| // 2) Read in package data. |
| // |
| // 3) Prepare environment variables. |
| // |
| // 4) Prepare(compile) boot image, if necessary. |
| // |
| // 5) Run update. |
| int Main(int argc, char** argv) { |
| if (!ReadArguments(argc, argv)) { |
| LOG(ERROR) << "Failed reading command line."; |
| return 1; |
| } |
| |
| if (!ReadSystemProperties()) { |
| LOG(ERROR)<< "Failed reading system properties."; |
| return 2; |
| } |
| |
| if (!ReadEnvironment()) { |
| LOG(ERROR) << "Failed reading environment properties."; |
| return 3; |
| } |
| |
| if (!CheckAndInitializeInstalldGlobals()) { |
| LOG(ERROR) << "Failed initializing globals."; |
| return 4; |
| } |
| |
| PrepareEnvironment(); |
| |
| if (!PrepareBootImage(/* force */ false)) { |
| LOG(ERROR) << "Failed preparing boot image."; |
| return 5; |
| } |
| |
| int dexopt_retcode = RunPreopt(); |
| |
| return dexopt_retcode; |
| } |
| |
| int GetProperty(const char* key, char* value, const char* default_value) const { |
| const std::string* prop_value = system_properties_.GetProperty(key); |
| if (prop_value == nullptr) { |
| if (default_value == nullptr) { |
| return 0; |
| } |
| // Copy in the default value. |
| strlcpy(value, default_value, kPropertyValueMax - 1); |
| value[kPropertyValueMax - 1] = 0; |
| return strlen(default_value);// TODO: Need to truncate? |
| } |
| size_t size = std::min(kPropertyValueMax - 1, prop_value->length()) + 1; |
| strlcpy(value, prop_value->data(), size); |
| return static_cast<int>(size - 1); |
| } |
| |
| std::string GetOTADataDirectory() const { |
| return StringPrintf("%s/%s", GetOtaDirectoryPrefix().c_str(), GetTargetSlot().c_str()); |
| } |
| |
| const std::string& GetTargetSlot() const { |
| return parameters_.target_slot; |
| } |
| |
| private: |
| |
| bool ReadSystemProperties() { |
| static constexpr const char* kPropertyFiles[] = { |
| "/default.prop", "/system/build.prop" |
| }; |
| |
| for (size_t i = 0; i < arraysize(kPropertyFiles); ++i) { |
| if (!system_properties_.Load(kPropertyFiles[i])) { |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| bool ReadEnvironment() { |
| // Parse the environment variables from init.environ.rc, which have the form |
| // export NAME VALUE |
| // For simplicity, don't respect string quotation. The values we are interested in can be |
| // encoded without them. |
| std::regex export_regex("\\s*export\\s+(\\S+)\\s+(\\S+)"); |
| bool parse_result = ParseFile("/init.environ.rc", [&](const std::string& line) { |
| std::smatch export_match; |
| if (!std::regex_match(line, export_match, export_regex)) { |
| return true; |
| } |
| |
| if (export_match.size() != 3) { |
| return true; |
| } |
| |
| std::string name = export_match[1].str(); |
| std::string value = export_match[2].str(); |
| |
| system_properties_.SetProperty(name, value); |
| |
| return true; |
| }); |
| if (!parse_result) { |
| return false; |
| } |
| |
| if (system_properties_.GetProperty(kAndroidDataPathPropertyName) == nullptr) { |
| return false; |
| } |
| android_data_ = *system_properties_.GetProperty(kAndroidDataPathPropertyName); |
| |
| if (system_properties_.GetProperty(kAndroidRootPathPropertyName) == nullptr) { |
| return false; |
| } |
| android_root_ = *system_properties_.GetProperty(kAndroidRootPathPropertyName); |
| |
| if (system_properties_.GetProperty(kBootClassPathPropertyName) == nullptr) { |
| return false; |
| } |
| boot_classpath_ = *system_properties_.GetProperty(kBootClassPathPropertyName); |
| |
| if (system_properties_.GetProperty(ASEC_MOUNTPOINT_ENV_NAME) == nullptr) { |
| return false; |
| } |
| asec_mountpoint_ = *system_properties_.GetProperty(ASEC_MOUNTPOINT_ENV_NAME); |
| |
| return true; |
| } |
| |
| const std::string& GetAndroidData() const { |
| return android_data_; |
| } |
| |
| const std::string& GetAndroidRoot() const { |
| return android_root_; |
| } |
| |
| const std::string GetOtaDirectoryPrefix() const { |
| return GetAndroidData() + "/ota"; |
| } |
| |
| bool CheckAndInitializeInstalldGlobals() { |
| // init_globals_from_data_and_root requires "ASEC_MOUNTPOINT" in the environment. We |
| // do not use any datapath that includes this, but we'll still have to set it. |
| CHECK(system_properties_.GetProperty(ASEC_MOUNTPOINT_ENV_NAME) != nullptr); |
| int result = setenv(ASEC_MOUNTPOINT_ENV_NAME, asec_mountpoint_.c_str(), 0); |
| if (result != 0) { |
| LOG(ERROR) << "Could not set ASEC_MOUNTPOINT environment variable"; |
| return false; |
| } |
| |
| if (!init_globals_from_data_and_root(GetAndroidData().c_str(), GetAndroidRoot().c_str())) { |
| LOG(ERROR) << "Could not initialize globals; exiting."; |
| return false; |
| } |
| |
| // This is different from the normal installd. We only do the base |
| // directory, the rest will be created on demand when each app is compiled. |
| if (access(GetOtaDirectoryPrefix().c_str(), R_OK) < 0) { |
| LOG(ERROR) << "Could not access " << GetOtaDirectoryPrefix(); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool ParseBool(const char* in) { |
| if (strcmp(in, "true") == 0) { |
| return true; |
| } |
| return false; |
| } |
| |
| bool ParseUInt(const char* in, uint32_t* out) { |
| char* end; |
| long long int result = strtoll(in, &end, 0); |
| if (in == end || *end != '\0') { |
| return false; |
| } |
| if (result < std::numeric_limits<uint32_t>::min() || |
| std::numeric_limits<uint32_t>::max() < result) { |
| return false; |
| } |
| *out = static_cast<uint32_t>(result); |
| return true; |
| } |
| |
| bool ReadArguments(int argc, char** argv) { |
| return parameters_.ReadArguments(argc, const_cast<const char**>(argv)); |
| } |
| |
| void PrepareEnvironment() { |
| environ_.push_back(StringPrintf("BOOTCLASSPATH=%s", boot_classpath_.c_str())); |
| environ_.push_back(StringPrintf("ANDROID_DATA=%s", GetOTADataDirectory().c_str())); |
| environ_.push_back(StringPrintf("ANDROID_ROOT=%s", android_root_.c_str())); |
| |
| for (const std::string& e : environ_) { |
| putenv(const_cast<char*>(e.c_str())); |
| } |
| } |
| |
| // Ensure that we have the right boot image. The first time any app is |
| // compiled, we'll try to generate it. |
| bool PrepareBootImage(bool force) const { |
| if (parameters_.instruction_set == nullptr) { |
| LOG(ERROR) << "Instruction set missing."; |
| return false; |
| } |
| const char* isa = parameters_.instruction_set; |
| |
| // Check whether the file exists where expected. |
| std::string dalvik_cache = GetOTADataDirectory() + "/" + DALVIK_CACHE; |
| std::string isa_path = dalvik_cache + "/" + isa; |
| std::string art_path = isa_path + "/system@framework@boot.art"; |
| std::string oat_path = isa_path + "/system@framework@boot.oat"; |
| bool cleared = false; |
| if (access(art_path.c_str(), F_OK) == 0 && access(oat_path.c_str(), F_OK) == 0) { |
| // Files exist, assume everything is alright if not forced. Otherwise clean up. |
| if (!force) { |
| return true; |
| } |
| ClearDirectory(isa_path); |
| cleared = true; |
| } |
| |
| // Reset umask in otapreopt, so that we control the the access for the files we create. |
| umask(0); |
| |
| // Create the directories, if necessary. |
| if (access(dalvik_cache.c_str(), F_OK) != 0) { |
| if (!CreatePath(dalvik_cache)) { |
| PLOG(ERROR) << "Could not create dalvik-cache dir " << dalvik_cache; |
| return false; |
| } |
| } |
| if (access(isa_path.c_str(), F_OK) != 0) { |
| if (!CreatePath(isa_path)) { |
| PLOG(ERROR) << "Could not create dalvik-cache isa dir"; |
| return false; |
| } |
| } |
| |
| // Prepare to create. |
| if (!cleared) { |
| ClearDirectory(isa_path); |
| } |
| |
| std::string preopted_boot_art_path = StringPrintf("/system/framework/%s/boot.art", isa); |
| if (access(preopted_boot_art_path.c_str(), F_OK) == 0) { |
| return PatchoatBootImage(isa_path, isa); |
| } else { |
| // No preopted boot image. Try to compile. |
| return Dex2oatBootImage(boot_classpath_, art_path, oat_path, isa); |
| } |
| } |
| |
| static bool CreatePath(const std::string& path) { |
| // Create the given path. Use string processing instead of dirname, as dirname's need for |
| // a writable char buffer is painful. |
| |
| // First, try to use the full path. |
| if (mkdir(path.c_str(), 0711) == 0) { |
| return true; |
| } |
| if (errno != ENOENT) { |
| PLOG(ERROR) << "Could not create path " << path; |
| return false; |
| } |
| |
| // Now find the parent and try that first. |
| size_t last_slash = path.find_last_of('/'); |
| if (last_slash == std::string::npos || last_slash == 0) { |
| PLOG(ERROR) << "Could not create " << path; |
| return false; |
| } |
| |
| if (!CreatePath(path.substr(0, last_slash))) { |
| return false; |
| } |
| |
| if (mkdir(path.c_str(), 0711) == 0) { |
| return true; |
| } |
| PLOG(ERROR) << "Could not create " << path; |
| return false; |
| } |
| |
| static void ClearDirectory(const std::string& dir) { |
| DIR* c_dir = opendir(dir.c_str()); |
| if (c_dir == nullptr) { |
| PLOG(WARNING) << "Unable to open " << dir << " to delete it's contents"; |
| return; |
| } |
| |
| for (struct dirent* de = readdir(c_dir); de != nullptr; de = readdir(c_dir)) { |
| const char* name = de->d_name; |
| if (strcmp(name, ".") == 0 || strcmp(name, "..") == 0) { |
| continue; |
| } |
| // We only want to delete regular files and symbolic links. |
| std::string file = StringPrintf("%s/%s", dir.c_str(), name); |
| if (de->d_type != DT_REG && de->d_type != DT_LNK) { |
| LOG(WARNING) << "Unexpected file " |
| << file |
| << " of type " |
| << std::hex |
| << de->d_type |
| << " encountered."; |
| } else { |
| // Try to unlink the file. |
| if (unlink(file.c_str()) != 0) { |
| PLOG(ERROR) << "Unable to unlink " << file; |
| } |
| } |
| } |
| CHECK_EQ(0, closedir(c_dir)) << "Unable to close directory."; |
| } |
| |
| bool PatchoatBootImage(const std::string& output_dir, const char* isa) const { |
| // This needs to be kept in sync with ART, see art/runtime/gc/space/image_space.cc. |
| |
| std::vector<std::string> cmd; |
| cmd.push_back("/system/bin/patchoat"); |
| |
| cmd.push_back("--input-image-location=/system/framework/boot.art"); |
| cmd.push_back(StringPrintf("--output-image-directory=%s", output_dir.c_str())); |
| |
| cmd.push_back(StringPrintf("--instruction-set=%s", isa)); |
| |
| int32_t base_offset = ChooseRelocationOffsetDelta(art::GetImageMinBaseAddressDelta(), |
| art::GetImageMaxBaseAddressDelta()); |
| cmd.push_back(StringPrintf("--base-offset-delta=%d", base_offset)); |
| |
| std::string error_msg; |
| bool result = Exec(cmd, &error_msg); |
| if (!result) { |
| LOG(ERROR) << "Could not generate boot image: " << error_msg; |
| } |
| return result; |
| } |
| |
| bool Dex2oatBootImage(const std::string& boot_cp, |
| const std::string& art_path, |
| const std::string& oat_path, |
| const char* isa) const { |
| // This needs to be kept in sync with ART, see art/runtime/gc/space/image_space.cc. |
| std::vector<std::string> cmd; |
| cmd.push_back("/system/bin/dex2oat"); |
| cmd.push_back(StringPrintf("--image=%s", art_path.c_str())); |
| for (const std::string& boot_part : Split(boot_cp, ":")) { |
| cmd.push_back(StringPrintf("--dex-file=%s", boot_part.c_str())); |
| } |
| cmd.push_back(StringPrintf("--oat-file=%s", oat_path.c_str())); |
| |
| int32_t base_offset = ChooseRelocationOffsetDelta(art::GetImageMinBaseAddressDelta(), |
| art::GetImageMaxBaseAddressDelta()); |
| cmd.push_back(StringPrintf("--base=0x%x", art::GetImageBaseAddress() + base_offset)); |
| |
| cmd.push_back(StringPrintf("--instruction-set=%s", isa)); |
| |
| // These things are pushed by AndroidRuntime, see frameworks/base/core/jni/AndroidRuntime.cpp. |
| AddCompilerOptionFromSystemProperty("dalvik.vm.image-dex2oat-Xms", |
| "-Xms", |
| true, |
| cmd); |
| AddCompilerOptionFromSystemProperty("dalvik.vm.image-dex2oat-Xmx", |
| "-Xmx", |
| true, |
| cmd); |
| AddCompilerOptionFromSystemProperty("dalvik.vm.image-dex2oat-filter", |
| "--compiler-filter=", |
| false, |
| cmd); |
| cmd.push_back("--image-classes=/system/etc/preloaded-classes"); |
| // TODO: Compiled-classes. |
| const std::string* extra_opts = |
| system_properties_.GetProperty("dalvik.vm.image-dex2oat-flags"); |
| if (extra_opts != nullptr) { |
| std::vector<std::string> extra_vals = Split(*extra_opts, " "); |
| cmd.insert(cmd.end(), extra_vals.begin(), extra_vals.end()); |
| } |
| // TODO: Should we lower this? It's usually set close to max, because |
| // normally there's not much else going on at boot. |
| AddCompilerOptionFromSystemProperty("dalvik.vm.image-dex2oat-threads", |
| "-j", |
| false, |
| cmd); |
| AddCompilerOptionFromSystemProperty( |
| StringPrintf("dalvik.vm.isa.%s.variant", isa).c_str(), |
| "--instruction-set-variant=", |
| false, |
| cmd); |
| AddCompilerOptionFromSystemProperty( |
| StringPrintf("dalvik.vm.isa.%s.features", isa).c_str(), |
| "--instruction-set-features=", |
| false, |
| cmd); |
| |
| std::string error_msg; |
| bool result = Exec(cmd, &error_msg); |
| if (!result) { |
| LOG(ERROR) << "Could not generate boot image: " << error_msg; |
| } |
| return result; |
| } |
| |
| static const char* ParseNull(const char* arg) { |
| return (strcmp(arg, "!") == 0) ? nullptr : arg; |
| } |
| |
| bool ShouldSkipPreopt() const { |
| // There's one thing we have to be careful about: we may/will be asked to compile an app |
| // living in the system image. This may be a valid request - if the app wasn't compiled, |
| // e.g., if the system image wasn't large enough to include preopted files. However, the |
| // data we have is from the old system, so the driver (the OTA service) can't actually |
| // know. Thus, we will get requests for apps that have preopted components. To avoid |
| // duplication (we'd generate files that are not used and are *not* cleaned up), do two |
| // simple checks: |
| // |
| // 1) Does the apk_path start with the value of ANDROID_ROOT? (~in the system image) |
| // (For simplicity, assume the value of ANDROID_ROOT does not contain a symlink.) |
| // |
| // 2) If you replace the name in the apk_path with "oat," does the path exist? |
| // (=have a subdirectory for preopted files) |
| // |
| // If the answer to both is yes, skip the dexopt. |
| // |
| // Note: while one may think it's OK to call dexopt and it will fail (because APKs should |
| // be stripped), that's not true for APKs signed outside the build system (so the |
| // jar content must be exactly the same). |
| |
| // (This is ugly as it's the only thing where we need to understand the contents |
| // of parameters_, but it beats postponing the decision or using the call- |
| // backs to do weird things.) |
| const char* apk_path = parameters_.apk_path; |
| CHECK(apk_path != nullptr); |
| if (StartsWith(apk_path, android_root_)) { |
| const char* last_slash = strrchr(apk_path, '/'); |
| if (last_slash != nullptr) { |
| std::string path(apk_path, last_slash - apk_path + 1); |
| CHECK(EndsWith(path, "/")); |
| path = path + "oat"; |
| if (access(path.c_str(), F_OK) == 0) { |
| LOG(INFO) << "Skipping A/B OTA preopt of already preopted package " << apk_path; |
| return true; |
| } |
| } |
| } |
| |
| // Another issue is unavailability of files in the new system. If the partition |
| // layout changes, otapreopt_chroot may not know about this. Then files from that |
| // partition will not be available and fail to build. This is problematic, as |
| // this tool will wipe the OTA artifact cache and try again (for robustness after |
| // a failed OTA with remaining cache artifacts). |
| if (access(apk_path, F_OK) != 0) { |
| LOG(WARNING) << "Skipping A/B OTA preopt of non-existing package " << apk_path; |
| return true; |
| } |
| |
| return false; |
| } |
| |
| // Run dexopt with the parameters of parameters_. |
| // TODO(calin): embed the profile name in the parameters. |
| int Dexopt() { |
| std::string dummy; |
| return dexopt(parameters_.apk_path, |
| parameters_.uid, |
| parameters_.pkgName, |
| parameters_.instruction_set, |
| parameters_.dexopt_needed, |
| parameters_.oat_dir, |
| parameters_.dexopt_flags, |
| parameters_.compiler_filter, |
| parameters_.volume_uuid, |
| parameters_.shared_libraries, |
| parameters_.se_info, |
| parameters_.downgrade, |
| parameters_.target_sdk_version, |
| parameters_.profile_name, |
| parameters_.dex_metadata_path, |
| parameters_.compilation_reason, |
| &dummy); |
| } |
| |
| int RunPreopt() { |
| if (ShouldSkipPreopt()) { |
| return 0; |
| } |
| |
| int dexopt_result = Dexopt(); |
| if (dexopt_result == 0) { |
| return 0; |
| } |
| |
| // If the dexopt failed, we may have a stale boot image from a previous OTA run. |
| // Then regenerate and retry. |
| if (WEXITSTATUS(dexopt_result) == |
| static_cast<int>(::art::dex2oat::ReturnCode::kCreateRuntime)) { |
| if (!PrepareBootImage(/* force */ true)) { |
| LOG(ERROR) << "Forced boot image creating failed. Original error return was " |
| << dexopt_result; |
| return dexopt_result; |
| } |
| |
| int dexopt_result_boot_image_retry = Dexopt(); |
| if (dexopt_result_boot_image_retry == 0) { |
| return 0; |
| } |
| } |
| |
| // If this was a profile-guided run, we may have profile version issues. Try to downgrade, |
| // if possible. |
| if ((parameters_.dexopt_flags & DEXOPT_PROFILE_GUIDED) == 0) { |
| return dexopt_result; |
| } |
| |
| LOG(WARNING) << "Downgrading compiler filter in an attempt to progress compilation"; |
| parameters_.dexopt_flags &= ~DEXOPT_PROFILE_GUIDED; |
| return Dexopt(); |
| } |
| |
| //////////////////////////////////// |
| // Helpers, mostly taken from ART // |
| //////////////////////////////////// |
| |
| // Wrapper on fork/execv to run a command in a subprocess. |
| static bool Exec(const std::vector<std::string>& arg_vector, std::string* error_msg) { |
| const std::string command_line = Join(arg_vector, ' '); |
| |
| CHECK_GE(arg_vector.size(), 1U) << command_line; |
| |
| // Convert the args to char pointers. |
| const char* program = arg_vector[0].c_str(); |
| std::vector<char*> args; |
| for (size_t i = 0; i < arg_vector.size(); ++i) { |
| const std::string& arg = arg_vector[i]; |
| char* arg_str = const_cast<char*>(arg.c_str()); |
| CHECK(arg_str != nullptr) << i; |
| args.push_back(arg_str); |
| } |
| args.push_back(nullptr); |
| |
| // Fork and exec. |
| pid_t pid = fork(); |
| if (pid == 0) { |
| // No allocation allowed between fork and exec. |
| |
| // Change process groups, so we don't get reaped by ProcessManager. |
| setpgid(0, 0); |
| |
| execv(program, &args[0]); |
| |
| PLOG(ERROR) << "Failed to execv(" << command_line << ")"; |
| // _exit to avoid atexit handlers in child. |
| _exit(1); |
| } else { |
| if (pid == -1) { |
| *error_msg = StringPrintf("Failed to execv(%s) because fork failed: %s", |
| command_line.c_str(), strerror(errno)); |
| return false; |
| } |
| |
| // wait for subprocess to finish |
| int status; |
| pid_t got_pid = TEMP_FAILURE_RETRY(waitpid(pid, &status, 0)); |
| if (got_pid != pid) { |
| *error_msg = StringPrintf("Failed after fork for execv(%s) because waitpid failed: " |
| "wanted %d, got %d: %s", |
| command_line.c_str(), pid, got_pid, strerror(errno)); |
| return false; |
| } |
| if (!WIFEXITED(status) || WEXITSTATUS(status) != 0) { |
| *error_msg = StringPrintf("Failed execv(%s) because non-0 exit status", |
| command_line.c_str()); |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| // Choose a random relocation offset. Taken from art/runtime/gc/image_space.cc. |
| static int32_t ChooseRelocationOffsetDelta(int32_t min_delta, int32_t max_delta) { |
| constexpr size_t kPageSize = PAGE_SIZE; |
| CHECK_EQ(min_delta % kPageSize, 0u); |
| CHECK_EQ(max_delta % kPageSize, 0u); |
| CHECK_LT(min_delta, max_delta); |
| |
| std::default_random_engine generator; |
| generator.seed(GetSeed()); |
| std::uniform_int_distribution<int32_t> distribution(min_delta, max_delta); |
| int32_t r = distribution(generator); |
| if (r % 2 == 0) { |
| r = RoundUp(r, kPageSize); |
| } else { |
| r = RoundDown(r, kPageSize); |
| } |
| CHECK_LE(min_delta, r); |
| CHECK_GE(max_delta, r); |
| CHECK_EQ(r % kPageSize, 0u); |
| return r; |
| } |
| |
| static uint64_t GetSeed() { |
| #ifdef __BIONIC__ |
| // Bionic exposes arc4random, use it. |
| uint64_t random_data; |
| arc4random_buf(&random_data, sizeof(random_data)); |
| return random_data; |
| #else |
| #error "This is only supposed to run with bionic. Otherwise, implement..." |
| #endif |
| } |
| |
| void AddCompilerOptionFromSystemProperty(const char* system_property, |
| const char* prefix, |
| bool runtime, |
| std::vector<std::string>& out) const { |
| const std::string* value = system_properties_.GetProperty(system_property); |
| if (value != nullptr) { |
| if (runtime) { |
| out.push_back("--runtime-arg"); |
| } |
| if (prefix != nullptr) { |
| out.push_back(StringPrintf("%s%s", prefix, value->c_str())); |
| } else { |
| out.push_back(*value); |
| } |
| } |
| } |
| |
| static constexpr const char* kBootClassPathPropertyName = "BOOTCLASSPATH"; |
| static constexpr const char* kAndroidRootPathPropertyName = "ANDROID_ROOT"; |
| static constexpr const char* kAndroidDataPathPropertyName = "ANDROID_DATA"; |
| // The index of the instruction-set string inside the package parameters. Needed for |
| // some special-casing that requires knowledge of the instruction-set. |
| static constexpr size_t kISAIndex = 3; |
| |
| // Stores the system properties read out of the B partition. We need to use these properties |
| // to compile, instead of the A properties we could get from init/get_property. |
| SystemProperties system_properties_; |
| |
| // Some select properties that are always needed. |
| std::string android_root_; |
| std::string android_data_; |
| std::string boot_classpath_; |
| std::string asec_mountpoint_; |
| |
| OTAPreoptParameters parameters_; |
| |
| // Store environment values we need to set. |
| std::vector<std::string> environ_; |
| }; |
| |
| OTAPreoptService gOps; |
| |
| //////////////////////// |
| // Plug-in functions. // |
| //////////////////////// |
| |
| int get_property(const char *key, char *value, const char *default_value) { |
| return gOps.GetProperty(key, value, default_value); |
| } |
| |
| // Compute the output path of |
| bool calculate_oat_file_path(char path[PKG_PATH_MAX], const char *oat_dir, |
| const char *apk_path, |
| const char *instruction_set) { |
| const char *file_name_start; |
| const char *file_name_end; |
| |
| file_name_start = strrchr(apk_path, '/'); |
| if (file_name_start == nullptr) { |
| ALOGE("apk_path '%s' has no '/'s in it\n", apk_path); |
| return false; |
| } |
| file_name_end = strrchr(file_name_start, '.'); |
| if (file_name_end == nullptr) { |
| ALOGE("apk_path '%s' has no extension\n", apk_path); |
| return false; |
| } |
| |
| // Calculate file_name |
| file_name_start++; // Move past '/', is valid as file_name_end is valid. |
| size_t file_name_len = file_name_end - file_name_start; |
| std::string file_name(file_name_start, file_name_len); |
| |
| // <apk_parent_dir>/oat/<isa>/<file_name>.odex.b |
| snprintf(path, |
| PKG_PATH_MAX, |
| "%s/%s/%s.odex.%s", |
| oat_dir, |
| instruction_set, |
| file_name.c_str(), |
| gOps.GetTargetSlot().c_str()); |
| return true; |
| } |
| |
| /* |
| * Computes the odex file for the given apk_path and instruction_set. |
| * /system/framework/whatever.jar -> /system/framework/oat/<isa>/whatever.odex |
| * |
| * Returns false if it failed to determine the odex file path. |
| */ |
| bool calculate_odex_file_path(char path[PKG_PATH_MAX], const char *apk_path, |
| const char *instruction_set) { |
| const char *path_end = strrchr(apk_path, '/'); |
| if (path_end == nullptr) { |
| ALOGE("apk_path '%s' has no '/'s in it?!\n", apk_path); |
| return false; |
| } |
| std::string path_component(apk_path, path_end - apk_path); |
| |
| const char *name_begin = path_end + 1; |
| const char *extension_start = strrchr(name_begin, '.'); |
| if (extension_start == nullptr) { |
| ALOGE("apk_path '%s' has no extension.\n", apk_path); |
| return false; |
| } |
| std::string name_component(name_begin, extension_start - name_begin); |
| |
| std::string new_path = StringPrintf("%s/oat/%s/%s.odex.%s", |
| path_component.c_str(), |
| instruction_set, |
| name_component.c_str(), |
| gOps.GetTargetSlot().c_str()); |
| if (new_path.length() >= PKG_PATH_MAX) { |
| LOG(ERROR) << "apk_path of " << apk_path << " is too long: " << new_path; |
| return false; |
| } |
| strcpy(path, new_path.c_str()); |
| return true; |
| } |
| |
| bool create_cache_path(char path[PKG_PATH_MAX], |
| const char *src, |
| const char *instruction_set) { |
| size_t srclen = strlen(src); |
| |
| /* demand that we are an absolute path */ |
| if ((src == 0) || (src[0] != '/') || strstr(src,"..")) { |
| return false; |
| } |
| |
| if (srclen > PKG_PATH_MAX) { // XXX: PKG_NAME_MAX? |
| return false; |
| } |
| |
| std::string from_src = std::string(src + 1); |
| std::replace(from_src.begin(), from_src.end(), '/', '@'); |
| |
| std::string assembled_path = StringPrintf("%s/%s/%s/%s%s", |
| gOps.GetOTADataDirectory().c_str(), |
| DALVIK_CACHE, |
| instruction_set, |
| from_src.c_str(), |
| DALVIK_CACHE_POSTFIX); |
| |
| if (assembled_path.length() + 1 > PKG_PATH_MAX) { |
| return false; |
| } |
| strcpy(path, assembled_path.c_str()); |
| |
| return true; |
| } |
| |
| static int log_callback(int type, const char *fmt, ...) { |
| va_list ap; |
| int priority; |
| |
| switch (type) { |
| case SELINUX_WARNING: |
| priority = ANDROID_LOG_WARN; |
| break; |
| case SELINUX_INFO: |
| priority = ANDROID_LOG_INFO; |
| break; |
| default: |
| priority = ANDROID_LOG_ERROR; |
| break; |
| } |
| va_start(ap, fmt); |
| LOG_PRI_VA(priority, "SELinux", fmt, ap); |
| va_end(ap); |
| return 0; |
| } |
| |
| static int otapreopt_main(const int argc, char *argv[]) { |
| int selinux_enabled = (is_selinux_enabled() > 0); |
| |
| setenv("ANDROID_LOG_TAGS", "*:v", 1); |
| android::base::InitLogging(argv); |
| |
| if (argc < 2) { |
| ALOGE("Expecting parameters"); |
| exit(1); |
| } |
| |
| union selinux_callback cb; |
| cb.func_log = log_callback; |
| selinux_set_callback(SELINUX_CB_LOG, cb); |
| |
| if (selinux_enabled && selinux_status_open(true) < 0) { |
| ALOGE("Could not open selinux status; exiting.\n"); |
| exit(1); |
| } |
| |
| int ret = android::installd::gOps.Main(argc, argv); |
| |
| return ret; |
| } |
| |
| } // namespace installd |
| } // namespace android |
| |
| int main(const int argc, char *argv[]) { |
| return android::installd::otapreopt_main(argc, argv); |
| } |