service/res/values/config.xml

<?xml version="1.0" encoding="utf-8"?>
<!-- Copyright (C) 2019 The Android Open Source Project

     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
     You may obtain a copy of the License at

          http://www.apache.org/licenses/LICENSE-2.0

     Unless required by applicable law or agreed to in writing, software
     distributed under the License is distributed on an "AS IS" BASIS,
     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
     See the License for the specific language governing permissions and
     limitations under the License.
-->

<!-- These resources are around just to allow their values to be customized
     for different hardware and product builds.  Do not translate.

     NOTE: The naming convention is "config_camelCaseValue". Some legacy
     entries do not follow the convention, but all new entries should. -->

<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
    <!-- boolean indicating whether the WiFi chipset has 5GHz band support.
         Note: This config is replacing the config_wifi_dual_band_support
         since more bands may now be supported (such as 6GHz), the naming dual_band
         is no longer indicative, and a separate config now exists for each band -->
    <bool translatable="false" name ="config_wifi5ghzSupport">false</bool>

    <!-- boolean indicating whether the WiFi chipset has 6GHz band support -->
    <bool translatable="false" name ="config_wifi6ghzSupport">false</bool>

    <!-- Maximum number of concurrent WiFi interfaces in AP mode -->
    <integer translatable="false" name="config_wifi_max_ap_interfaces">1</integer>

    <!-- Boolean indicating whether the wifi chipset requires the softap band be -->
    <!-- converted from 5GHz to ANY due to hardware restrictions -->
    <bool translatable="false" name="config_wifi_convert_apband_5ghz_to_any">false</bool>

    <!-- Boolean indicating whether 802.11r Fast BSS Transition is enabled on this platform -->
    <bool translatable="false" name="config_wifi_fast_bss_transition_enabled">false</bool>

    <!-- Device type information conforming to Annex B format in WiFi Direct specification.
         The default represents a dual-mode smartphone -->
    <string translatable="false" name="config_wifi_p2p_device_type">10-0050F204-5</string>

    <!-- Boolean indicating whether the wifi chipset supports background scanning mechanism.
         This mechanism allows the host to remain in suspend state and the dongle to actively
         scan and wake the host when a configured SSID is detected by the dongle. This chipset
         capability can provide power savings when wifi needs to be always kept on. -->
    <bool translatable="false" name="config_wifi_background_scan_support">false</bool>

    <!-- Boolean indicating whether or not to revert to default country code when cellular
         radio is unable to find any MCC information to infer wifi country code from -->
    <bool translatable="false" name="config_wifi_revert_country_code_on_cellular_loss">false</bool>

    <!-- Integer size limit, in KB, for a single WifiLogger ringbuffer, in default logging mode -->
    <integer translatable="false" name="config_wifi_logger_ring_buffer_default_size_limit_kb">32</integer>

    <!-- Integer size limit, in KB, for a single WifiLogger ringbuffer, in verbose logging mode -->
    <integer translatable="false" name="config_wifi_logger_ring_buffer_verbose_size_limit_kb">1024</integer>

    <!-- Array indicating wifi fatal firmware alert error code list from driver -->
    <integer-array translatable="false" name="config_wifi_fatal_firmware_alert_error_code_list">
        <!-- Example:
        <item>0</item>
        <item>1</item>
        <item>2</item>
        -->
    </integer-array>

    <!-- Boolean indicating whether or not wifi should turn off when emergency call is made -->
    <bool translatable="false" name="config_wifi_turn_off_during_emergency_call">false</bool>

    <!-- Parameters for controlling network selection by the framework -->

    <!-- The ratio of the next two parameters is the multiplier that converts the estimated
         throughput in Mbps to score points. -->
    <integer translatable="false" name="config_wifiFrameworkThroughputBonusNumerator">120</integer>
    <integer translatable="false" name="config_wifiFrameworkThroughputBonusDenominator">433</integer>

    <!-- Maximum contribution (in score points) due to the estimated throughput. -->
    <integer translatable="false" name="config_wifiFrameworkThroughputBonusLimit">200</integer>

    <!-- The default values chosen here establish four non-overlapping categories:
             saved, unmetered
             unsaved, unmetered
             saved, metered
             unsaved, metered
         These values can be reduced to allow overlapping between categories. -->
    <integer translatable="false" name="config_wifiFrameworkSavedNetworkBonus">500</integer>
    <integer translatable="false" name="config_wifiFrameworkUnmeteredNetworkBonus">1000</integer>

    <integer translatable="false" name="config_wifiFrameworkCurrentNetworkBonus">20</integer>
    <integer translatable="false" name="config_wifiFrameworkSecureNetworkBonus">10</integer>

    <!-- The bonus for the last-selected network starts out very large to override the category
         boundaries. -->
    <integer translatable="false" name="config_wifiFrameworkLastSelectionBonus">1999</integer>

    <!-- Integer specifying the min packet Tx/Rx rates in packets per second to be considered
         active traffic so that network selection and scan could be skipped-->
    <integer translatable="false" name="config_wifiFrameworkMinPacketPerSecondActiveTraffic">16</integer>
    <!-- Integer specifying the min packet Tx/Rx rates in packets per second to be considered
         high traffic so that the device should stay on WiFi even if RSSI is very low -->
    <integer translatable="false" name="config_wifiFrameworkMinPacketPerSecondHighTraffic">100</integer>
    <!-- Integer parameters of the wifi to cellular handover feature
         wifi should not stick to bad networks -->
    <!-- Integer threshold for low network score, should be somewhat less than the entry threshhold -->
    <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_5GHz">-80</integer>
    <!-- Integer threshold, do not connect to APs with RSSI lower than the entry threshold -->
    <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_5GHz">-77</integer>
    <integer translatable="false" name="config_wifi_framework_wifi_score_low_rssi_threshold_5GHz">-70</integer>
    <integer translatable="false" name="config_wifi_framework_wifi_score_good_rssi_threshold_5GHz">-57</integer>
    <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_24GHz">-83</integer>
    <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_24GHz">-80</integer>
    <integer translatable="false" name="config_wifi_framework_wifi_score_low_rssi_threshold_24GHz">-73</integer>
    <integer translatable="false" name="config_wifi_framework_wifi_score_good_rssi_threshold_24GHz">-60</integer>
    <integer translatable="false" name="config_wifiFrameworkScoreBadRssiThreshold6ghz">-80</integer>
    <integer translatable="false" name="config_wifiFrameworkScoreEntryRssiThreshold6ghz">-77</integer>
    <integer translatable="false" name="config_wifiFrameworkScoreLowRssiThreshold6ghz">-70</integer>
    <integer translatable="false" name="config_wifiFrameworkScoreGoodRssiThreshold6ghz">-57</integer>

    <!-- Integer delay in milliseconds before shutting down soft AP when there
         are no connected devices. Framework will enforce a minimum limit on
         this value and this setting will be overridden if the provided value is
         smaller than the limit. -->
    <integer translatable="false" name="config_wifi_framework_soft_ap_timeout_delay">600000</integer>

    <!-- Integer indicating maximum hardware supported client number of soft ap -->
    <integer translatable="false" name="config_wifiHardwareSoftapMaxClientCount">16</integer>

    <string  translatable="false" name="config_wifi_random_mac_oui">DA-A1-19</string>

    <!-- List of allowed channels in 2GHz band for softap. If the device doesn't want to restrict
         channels this should be empty. Values is a comma separated channel string and/or channel
         range string like '1-6,11'. -->
    <string  translatable="false" name="config_wifiSoftap2gChannelList">1,6,11</string>

    <!-- List of allowed channels in 5GHz band for softap. If the device doesn't want to restrict
         channels this should be empty. Values is a comma separated channel string and/or channel
         range string like '36-48,149'. -->
    <string  translatable="false" name="config_wifiSoftap5gChannelList"></string>

    <!-- List of allowed channels in 6GHz band for softap. If the device doesn't want to restrict
         channels this should be empty. Values is a comma separated channel string and/or channel
         range string like '36-48,149'. -->
    <string  translatable="false" name="config_wifiSoftap6gChannelList"></string>

    <!-- Integer indicating associated full scan max num active channels -->
    <integer translatable="false" name="config_wifi_framework_associated_partial_scan_max_num_active_channels">6</integer>

    <!-- Integer delay in milliseconds before set wlan interface up during watchdog recovery -->
    <integer translatable="false" name="config_wifi_framework_recovery_timeout_delay">2000</integer>

    <!-- Boolean indicating associated network selection is allowed -->
    <bool translatable="false" name="config_wifi_framework_enable_associated_network_selection">true</bool>

    <!-- Boolean indicating whether single radio chain scan results are to be used for network selection -->
    <bool translatable="false" name="config_wifi_framework_use_single_radio_chain_scan_results_network_selection">true</bool>

    <!-- Boolean indicating that wifi only link configuratios that have exact same credentials (i.e PSK) -->
    <bool translatable="false" name="config_wifi_only_link_same_credential_configurations">true</bool>

    <!-- Boolean indicating whether framework needs to set the tx power limit for meeting SAR requirements -->
    <bool translatable="false" name="config_wifi_framework_enable_sar_tx_power_limit">false</bool>

    <!-- Boolean indicating whether framework should use detection of softAP mode to set the tx
         power limit for meeting SAR requirements -->
    <bool translatable="false" name="config_wifi_framework_enable_soft_ap_sar_tx_power_limit">false</bool>

    <!-- Wifi Hal supports force client disconnect for softap -->
    <bool translatable="false" name="config_wifiSofapClientForceDisconnectSupported">true</bool>

    <!-- Wifi driver supports Automatic channel selection (ACS) for softap -->
    <bool translatable="false" name="config_wifi_softap_acs_supported">false</bool>

    <!-- Wifi driver supports WPA3 Simultaneous Authentication of Equals (WPA3-SAE) for softap -->
    <bool translatable="false" name="config_wifi_softap_sae_supported">false</bool>

    <!-- Wifi driver supports IEEE80211AC for softap -->
    <bool translatable="false" name="config_wifi_softap_ieee80211ac_supported">false</bool>

    <!-- Wifi driver supports IEEE80211AX for softap -->
    <bool translatable="false" name="config_wifiSoftapIeee80211axSupported">false</bool>

    <!-- Wifi driver supports IEEE80211AX single user beamformer for softap -->
    <bool translatable="false" name="config_wifiSoftapHeSuBeamformerSupported">false</bool>

    <!-- Wifi driver supports IEEE80211AX single user beamformee for softap -->
    <bool translatable="false" name="config_wifiSoftapHeSuBeamformeeSupported">false</bool>

    <!-- Wifi driver supports IEEE80211AX multiple user beamformer for softap -->
    <bool translatable="false" name="config_wifiSoftapHeMuBeamformerSupported">false</bool>

    <!-- Wifi driver IEEE80211AX bss color for softap -->
    <integer translatable="false" name="config_wifiSoftapHeBssColor">0</integer>

    <!-- Wifi driver supports IEEE80211AX TWT (Target Wake Time) for softap -->
    <bool translatable="false" name="config_wifiSoftapHeTwtSupported">false</bool>

    <!-- Wifi driver supports 6GHz band for softap -->
    <bool translatable="false" name="config_wifiSoftap6ghzSupported">false</bool>

    <!-- Indicates that local-only hotspot should be brought up at 5GHz.  This option is
         for automotive builds only (the one that have PackageManager#FEATURE_AUTOMOTIVE) -->
    <bool translatable="false" name="config_wifi_local_only_hotspot_5ghz">false</bool>

    <!-- Indicates that connected MAC randomization is supported on this device -->
    <bool translatable="false" name="config_wifi_connected_mac_randomization_supported">false</bool>

    <!-- Indicates that p2p MAC randomization is supported on this device -->
    <bool translatable="false" name="config_wifi_p2p_mac_randomization_supported">false</bool>

    <!-- Indicates that AP mode MAC randomization is supported on this device -->
    <bool translatable="false" name="config_wifi_ap_mac_randomization_supported">true</bool>

    <!-- list of SSIDs to enable aggressive MAC randomization on -->
    <string-array translatable="false" name="config_wifi_aggressive_randomization_ssid_allowlist">
        <!-- SSIDs are expected in quoted format:
        <item>\"SSID_1\"</item>
        <item>\"SSID_2\"</item>
        -->
    </string-array>

    <!-- list of SSIDs to disable aggressive MAC randomization on. If a SSID is in both the
    allowlist and blocklist, then aggressive MAC randomization will still be disabled. -->
    <string-array translatable="false" name="config_wifi_aggressive_randomization_ssid_blocklist">
        <!-- SSIDs are expected in quoted format:
        <item>\"SSID_1\"</item>
        <item>\"SSID_2\"</item>
        -->
    </string-array>

    <!-- Indicates that wifi link probing is supported on this device -->
    <bool translatable="false" name="config_wifi_link_probing_supported">false</bool>

    <!-- Indicates that 11ax mode is supported on this device -->
    <bool translatable="false" name="config_wifi_11ax_supported">false</bool>

    <!-- Indicates that contiguous 160MHz mode is supported on this device -->
    <bool translatable="false" name="config_wifi_contiguous_160mhz_supported">false</bool>

    <!-- Integer indicating the max number of spatial streams supported on this device -->
    <integer translatable="false" name="config_wifi_max_num_spatial_stream_supported">2</integer>

    <!-- Configure wifi tcp buffersizes in the form:
         rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max -->
    <string name="config_wifi_tcp_buffers" translatable="false">524288,1048576,2097152,262144,524288,1048576</string>

    <!-- Do not translate. Default access point SSID used for tethering -->
    <string name="wifi_tether_configure_ssid_default" translatable="false">AndroidAP</string>
    <!-- Do not translate. Default access point SSID used for local only hotspot -->
    <string name="wifi_localhotspot_configure_ssid_default" translatable="false">AndroidShare</string>

    <!-- Indicates that a full bugreport should be triggered when wifi diagnostics detects an error on non-user (i.e debug) builds -->
    <bool translatable="false" name="config_wifi_diagnostics_bugreport_enabled">false</bool>

    <!-- Indicates that wifi watchdog is enabled on this device -->
    <bool translatable="false" name="config_wifi_watchdog_enabled">true</bool>

    <!--
    Controls the mapping between RSSI and RSSI levels.

    RSSI                                    RSSI Level
    (-infinity, thresholds[0])                       0
    [threshold[0], threshold[1])                     1
    [threshold[1], threshold[2])                     2
    ...                                            ...
    [threshold[len-2], threshold[len-1])         len-1
    [threshold[len-1], +infinity)                  len

    where:
        [a, b) is the range of integers `n` such that a <= n < b
        `threshold[i]` represents the i'th element of the config_wifiRssiLevelThresholds array
        and `len` is the length of the config_wifiRssiLevelThresholds array.
    -->
    <integer-array translatable="false" name="config_wifiRssiLevelThresholds">
                         <!-- RSSI                RSSI Level -->
        <item>-88</item> <!-- (-infinity, -88)             0 -->
        <item>-77</item> <!-- [-88, -77)                   1 -->
        <item>-66</item> <!-- [-77, -66)                   2 -->
        <item>-55</item> <!-- [-66, -55)                   3 -->
                         <!-- [-55, +infinity)             4 -->
    </integer-array>

    <!-- Array describing scanning schedule in seconds when device is disconnected and screen is on -->
    <integer-array translatable="false" name="config_wifiDisconnectedScanIntervalScheduleSec">
        <item>20</item>
        <item>40</item>
        <item>80</item>
        <item>160</item>
    </integer-array>

    <!-- Array describing scanning schedule in seconds when device is connected and screen is on -->
    <integer-array translatable="false" name="config_wifiConnectedScanIntervalScheduleSec">
        <item>20</item>
        <item>40</item>
        <item>80</item>
        <item>160</item>
    </integer-array>

    <!-- Indicates that hidden networks are to be scanned during scan only mode -->
    <bool translatable="false" name="config_wifiScanHiddenNetworksScanOnlyMode">false</bool>
</resources>