configs/msm8937/sound_trigger_platform_info.xml

<?xml version="1.0" encoding="ISO-8859-1"?>
<!--- Copyright (c) 2013-2016, 2018, The Linux Foundation. All rights reserved.       -->
<!---                                                                           -->
<!--- Redistribution and use in source and binary forms, with or without        -->
<!--- modification, are permitted provided that the following conditions are    -->
<!--- met:                                                                      -->
<!---     * Redistributions of source code must retain the above copyright      -->
<!---       notice, this list of conditions and the following disclaimer.       -->
<!---     * Redistributions in binary form must reproduce the above             -->
<!---       copyright notice, this list of conditions and the following         -->
<!---       disclaimer in the documentation and/or other materials provided     -->
<!---       with the distribution.                                              -->
<!---     * Neither the name of The Linux Foundation nor the names of its       -->
<!---       contributors may be used to endorse or promote products derived     -->
<!---       from this software without specific prior written permission.       -->
<!---                                                                           -->
<!--- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED              -->
<!--- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF      -->
<!--- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT    -->
<!--- ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS    -->
<!--- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR    -->
<!--- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF      -->
<!--- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR           -->
<!--- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,     -->
<!--- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE      -->
<!--- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN    -->
<!--- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                             -->
<sound_trigger_platform_info>
    <param version="0x0101" /> <!-- this must be the first param -->

    <common_config>
        <param max_cpe_sessions="1" />
        <param max_ape_sessions="5" />
        <param enable_failure_detection="false" />
        <param rx_concurrency_disabled="true" />
        <param rx_conc_max_st_ses="1" />
        <!-- Transition will only occur if execution_type="DYNAMIC" -->
        <param transit_to_adsp_on_playback="false" />
        <!-- Below backend params must match with port used in mixer path file -->
        <!-- param used to configure backend sample rate, format and channels -->
        <!--Enable below backend params for internal codec-->
        <!--param backend_port_name="MI2S_TX" />
        <param backend_dai_name="TERT_MI2S_TX" /-->
        <param backend_port_name="SLIM_0_TX" />
        <param backend_dai_name="SLIMBUS_0_TX" />
    </common_config>

    <acdb_ids>
    <!--For internal codec please enable below device-->
    <!--param DEVICE_HANDSET_MIC_APE="130" /-->
        <param DEVICE_HANDSET_MIC_APE="100" />
        <param DEVICE_HANDSET_MIC_CPE="128" />
        <param DEVICE_HANDSET_MIC_ECPP_CPE="128" />
        <param DEVICE_HANDSET_MIC_PP_APE="151" />
        <param DEVICE_HANDSET_QMIC_APE="150" />
        <param DEVICE_HANDSET_DMIC_APE="149" />
    </acdb_ids>

    <!-- Multiple sound_model_config tags can be listed, each with unique    -->
    <!-- vendor_uuid. The below tag represents QTI SVA engine sound model    -->
    <!-- configuration. ISV must use their own unique vendor_uuid.           -->
    <sound_model_config>
        <param vendor_uuid="68ab2d40-e860-11e3-95ef-0002a5d5c51b" />
        <param execution_type="WDSP" /> <!-- value: "WDSP" "ADSP" "DYNAMIC" -->
        <param app_type="2" /> <!-- app type used in ACDB -->
        <param library="libsmwrapper.so" />
        <param max_cpe_phrases="6" />
        <param max_cpe_users="3" />
        <param max_ape_phrases="10" />
        <param max_ape_users="10" />
        <param sample_rate="16000" />
        <param bit_width="16" />
        <param channel_count="1"/>

        <!-- adm_cfg_profile should match with the one defined under adm_config -->
        <!-- Set it to NONE if LSM directly connects to AFE -->
        <param adm_cfg_profile="NONE" />
        <!-- fluence_type: "FLUENCE", "FLUENCE_DMIC", "FLUENCE_TMIC", -->
        <!-- "FLUENCE_QMIC". param value is valid when adm_cfg_profile="FLUENCE"-->
        <param fluence_type="FLUENCE_QMIC" />

        <!-- Module and param ids with which the algorithm is integrated in firmware -->
        <lsm_usecase>
            <param execution_mode="WDSP" />
            <param load_sound_model_ids="0x00012C0D, 0x00012C14" />
            <param unload_sound_model_ids="0x00012C0D, 0x00012C15" />
            <param confidence_levels_ids="0x00012C0D, 0x00012C07" />
            <param operation_mode_ids="0x00012C0D, 0x00012C02" />
            <param custom_config_ids="0x00012C0D, 0x00012C20" />
        </lsm_usecase>

        <lsm_usecase>
            <param execution_mode="ADSP" />
            <param load_sound_model_ids="0x00012C0D, 0x00012C14" />
            <param unload_sound_model_ids="0x00012C0D, 0x00012C15" />
            <param confidence_levels_ids="0x00012C0D, 0x00012C07" />
            <param operation_mode_ids="0x00012C0D, 0x00012C02" />
            <param custom_config_ids="0x00012C0D, 0x00012C20" />
        </lsm_usecase>

        <!-- format: "ADPCM_packet" or "PCM_packet" !-->
        <!-- transfer_mode: "FTRT" or "RT" -->
        <!--  kw_duration is in milli seconds. It is valid only for FTRT transfer mode -->
        <param capture_keyword="PCM_packet, RT, 2000" />
        <param client_capture_read_delay="2500" />
        <arm_ss_usecase>
            <!-- Options are "KEYWORD_DETECTION", "USER_VERIFICATION", "CUSTOM_DETECTION"  -->
            <param sm_detection_type= "KEYWORD_DETECTION" />
            <param sm_id="0x2" />
            <param module_lib="libcapiv2svacnn.so"/>
            <param sample_rate="16000"/>
            <param bit_wdith="16"/>
            <param channel_count="1"/>
        </arm_ss_usecase>
        <arm_ss_usecase>
            <param sm_detection_type= "USER_VERIFICATION" />
            <param sm_id="0x4" />
            <param module_lib="libcapiv2vop.so"/>
            <param sample_rate="16000"/>
            <param bit_wdith="16"/>
            <param channel_count="1"/>
        </arm_ss_usecase>
    </sound_model_config>

    <!-- Multiple adm_config tags can be listed, each with unique profile name. -->
    <!-- app_type to match corresponding value from ACDB -->
    <adm_config>
        <param adm_cfg_profile="DEFAULT" />
        <param app_type="69938" />
        <param sample_rate="16000" />
        <param bit_width="16" />
    </adm_config>

    <adm_config>
        <param adm_cfg_profile="FLUENCE" />
        <param app_type="69944" />
        <param sample_rate="16000" />
        <param bit_width="16" />
    </adm_config>

</sound_trigger_platform_info>