| /* |
| * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| #define LOG_TAG "split_a2dp" |
| /*#define LOG_NDEBUG 0*/ |
| #define LOG_NDDEBUG 0 |
| #include <errno.h> |
| #include <cutils/log.h> |
| #include <dlfcn.h> |
| #include "audio_hw.h" |
| #include "platform.h" |
| #include "platform_api.h" |
| #include "audio_extn.h" |
| #include <stdlib.h> |
| #include <cutils/str_parms.h> |
| #include <hardware/audio.h> |
| #include <hardware/hardware.h> |
| #include <cutils/properties.h> |
| |
| #ifdef DYNAMIC_LOG_ENABLED |
| #include <log_xml_parser.h> |
| #define LOG_MASK HAL_MOD_FILE_A2DP |
| #include <log_utils.h> |
| #endif |
| |
| #ifdef SPLIT_A2DP_ENABLED |
| #define AUDIO_PARAMETER_A2DP_STARTED "A2dpStarted" |
| #define BT_IPC_SOURCE_LIB_NAME "libbthost_if.so" |
| #define BT_IPC_SINK_LIB_NAME "libbthost_if_sink.so" |
| #define MEDIA_FMT_NONE 0 |
| #define MEDIA_FMT_AAC 0x00010DA6 |
| #define MEDIA_FMT_APTX 0x000131ff |
| #define MEDIA_FMT_APTX_HD 0x00013200 |
| #define MEDIA_FMT_SBC 0x00010BF2 |
| #define MEDIA_FMT_CELT 0x00013221 |
| #define MEDIA_FMT_LDAC 0x00013224 |
| #define MEDIA_FMT_MP3 0x00010BE9 |
| #define MEDIA_FMT_APTX_ADAPTIVE 0x00013204 |
| #define MEDIA_FMT_AAC_AOT_LC 2 |
| #define MEDIA_FMT_AAC_AOT_SBR 5 |
| #define MEDIA_FMT_AAC_AOT_PS 29 |
| #define PCM_CHANNEL_L 1 |
| #define PCM_CHANNEL_R 2 |
| #define PCM_CHANNEL_C 3 |
| #define MEDIA_FMT_SBC_CHANNEL_MODE_MONO 1 |
| #define MEDIA_FMT_SBC_CHANNEL_MODE_STEREO 2 |
| #define MEDIA_FMT_SBC_CHANNEL_MODE_DUAL_MONO 8 |
| #define MEDIA_FMT_SBC_CHANNEL_MODE_JOINT_STEREO 9 |
| #define MEDIA_FMT_SBC_ALLOCATION_METHOD_LOUDNESS 0 |
| #define MEDIA_FMT_SBC_ALLOCATION_METHOD_SNR 1 |
| #define MIXER_ENC_CONFIG_BLOCK "SLIM_7_RX Encoder Config" |
| #define MIXER_DEC_CONFIG_BLOCK "SLIM_9_TX Decoder Config" |
| #define MIXER_ENC_BIT_FORMAT "AFE Input Bit Format" |
| #define MIXER_DEC_BIT_FORMAT "AFE Output Bit Format" |
| #define MIXER_SCRAMBLER_MODE "AFE Scrambler Mode" |
| #define MIXER_SAMPLE_RATE_SINK "BT_TX SampleRate" |
| #define MIXER_SAMPLE_RATE_SOURCE "BT SampleRate" |
| #define MIXER_AFE_IN_CHANNELS "AFE Input Channels" |
| #define MIXER_AFE_SINK_CHANNELS "AFE Output Channels" |
| #define MIXER_ENC_FMT_SBC "SBC" |
| #define MIXER_ENC_FMT_AAC "AAC" |
| #define MIXER_ENC_FMT_APTX "APTX" |
| #define MIXER_ENC_FMT_APTXHD "APTXHD" |
| #define MIXER_ENC_FMT_NONE "NONE" |
| #define ENCODER_LATENCY_SBC 10 |
| #define ENCODER_LATENCY_APTX 40 |
| #define ENCODER_LATENCY_APTX_HD 20 |
| #define ENCODER_LATENCY_AAC 70 |
| //To Do: Fine Tune Encoder CELT/LDAC latency. |
| #define ENCODER_LATENCY_CELT 40 |
| #define ENCODER_LATENCY_LDAC 40 |
| #define DEFAULT_SINK_LATENCY_SBC 140 |
| #define DEFAULT_SINK_LATENCY_APTX 160 |
| #define DEFAULT_SINK_LATENCY_APTX_HD 180 |
| #define DEFAULT_SINK_LATENCY_AAC 180 |
| //To Do: Fine Tune Default CELT/LDAC Latency. |
| #define DEFAULT_SINK_LATENCY_CELT 180 |
| #define DEFAULT_SINK_LATENCY_LDAC 180 |
| |
| #define SOURCE 0 |
| #define SINK 1 |
| |
| /* |
| * Below enum values are extended from audio_base.h to |
| * to keep encoder and decoder type local to bthost_ipc |
| * and audio_hal as these are intended only for handshake |
| * between IPC lib and Audio HAL. |
| */ |
| typedef enum { |
| CODEC_TYPE_INVALID = AUDIO_FORMAT_INVALID, // 0xFFFFFFFFUL |
| CODEC_TYPE_AAC = AUDIO_FORMAT_AAC, // 0x04000000UL |
| CODEC_TYPE_SBC = AUDIO_FORMAT_SBC, // 0x1F000000UL |
| CODEC_TYPE_APTX = AUDIO_FORMAT_APTX, // 0x20000000UL |
| CODEC_TYPE_APTX_HD = AUDIO_FORMAT_APTX_HD, // 0x21000000UL |
| #ifndef LINUX_ENABLED |
| CODEC_TYPE_APTX_DUAL_MONO = 570425344u, // 0x22000000UL |
| #endif |
| CODEC_TYPE_LDAC = AUDIO_FORMAT_LDAC, // 0x23000000UL |
| CODEC_TYPE_CELT = 603979776u, // 0x24000000UL |
| }codec_t; |
| |
| typedef int (*audio_source_open_t)(void); |
| typedef int (*audio_source_close_t)(void); |
| typedef int (*audio_source_start_t)(void); |
| typedef int (*audio_source_stop_t)(void); |
| typedef int (*audio_source_suspend_t)(void); |
| typedef void (*audio_source_handoff_triggered_t)(void); |
| typedef void (*clear_source_a2dpsuspend_flag_t)(void); |
| typedef void * (*audio_get_enc_config_t)(uint8_t *multicast_status, |
| uint8_t *num_dev, codec_t *codec_type); |
| typedef int (*audio_source_check_a2dp_ready_t)(void); |
| typedef int (*audio_is_source_scrambling_enabled_t)(void); |
| typedef int (*audio_sink_start_t)(void); |
| typedef int (*audio_sink_stop_t)(void); |
| typedef void * (*audio_get_dec_config_t)(codec_t *codec_type); |
| typedef void * (*audio_sink_session_setup_complete_t)(uint64_t system_latency); |
| typedef int (*audio_sink_check_a2dp_ready_t)(void); |
| typedef uint16_t (*audio_sink_get_a2dp_latency_t)(void); |
| |
| enum A2DP_STATE { |
| A2DP_STATE_CONNECTED, |
| A2DP_STATE_STARTED, |
| A2DP_STATE_STOPPED, |
| A2DP_STATE_DISCONNECTED, |
| }; |
| |
| /* structure used to update a2dp state machine |
| * to communicate IPC library |
| * to store DSP encoder configuration information |
| */ |
| struct a2dp_data { |
| struct audio_device *adev; |
| void *bt_lib_source_handle; |
| audio_source_open_t audio_source_open; |
| audio_source_close_t audio_source_close; |
| audio_source_start_t audio_source_start; |
| audio_source_stop_t audio_source_stop; |
| audio_source_suspend_t audio_source_suspend; |
| audio_source_handoff_triggered_t audio_source_handoff_triggered; |
| clear_source_a2dpsuspend_flag_t clear_source_a2dpsuspend_flag; |
| audio_get_enc_config_t audio_get_enc_config; |
| audio_source_check_a2dp_ready_t audio_source_check_a2dp_ready; |
| audio_is_source_scrambling_enabled_t audio_is_source_scrambling_enabled; |
| enum A2DP_STATE bt_state_source; |
| codec_t bt_encoder_format; |
| uint32_t enc_sampling_rate; |
| uint32_t enc_channels; |
| bool a2dp_source_started; |
| bool a2dp_source_suspended; |
| int a2dp_source_total_active_session_requests; |
| bool is_a2dp_offload_supported; |
| bool is_handoff_in_progress; |
| bool is_aptx_dual_mono_supported; |
| |
| void *bt_lib_sink_handle; |
| audio_sink_start_t audio_sink_start; |
| audio_sink_stop_t audio_sink_stop; |
| audio_get_dec_config_t audio_get_dec_config; |
| audio_sink_session_setup_complete_t audio_sink_session_setup_complete; |
| audio_sink_check_a2dp_ready_t audio_sink_check_a2dp_ready; |
| audio_sink_get_a2dp_latency_t audio_sink_get_a2dp_latency; |
| enum A2DP_STATE bt_state_sink; |
| codec_t bt_decoder_format; |
| uint32_t dec_sampling_rate; |
| uint32_t dec_channels; |
| bool a2dp_sink_started; |
| int a2dp_sink_total_active_session_requests; |
| }; |
| |
| struct a2dp_data a2dp; |
| |
| /* START of DSP configurable structures |
| * These values should match with DSP interface defintion |
| */ |
| |
| /* AAC encoder configuration structure. */ |
| typedef struct aac_enc_cfg_t aac_enc_cfg_t; |
| |
| /* supported enc_mode are AAC_LC, AAC_SBR, AAC_PS |
| * supported aac_fmt_flag are ADTS/RAW |
| * supported channel_cfg are Native mode, Mono , Stereo |
| */ |
| struct aac_enc_cfg_t { |
| uint32_t enc_format; |
| uint32_t bit_rate; |
| uint32_t enc_mode; |
| uint16_t aac_fmt_flag; |
| uint16_t channel_cfg; |
| uint32_t sample_rate; |
| } __attribute__ ((packed)); |
| |
| /* Information about BT AAC decoder configuration |
| * This data is used between audio HAL module and |
| * BT IPC library to configure DSP decoder |
| */ |
| typedef struct { |
| uint16_t aac_fmt_flag; /* LATM*/ |
| uint16_t audio_object_type; /* LC */ |
| uint16_t channels; /* Stereo */ |
| uint16_t total_size_of_pce_bits; /* 0 - only for channel conf PCE */ |
| uint32_t sampling_rate; /* 8k, 11.025k, 12k, 16k, 22.05k, 24k, 32k, |
| 44.1k, 48k, 64k, 88.2k, 96k */ |
| } audio_aac_decoder_config_t; |
| |
| /* Information about BT SBC decoder configuration |
| * This data is used between audio HAL module and |
| * BT IPC library to configure DSP decoder |
| */ |
| typedef struct { |
| uint16_t channels; /* Mono, Stereo */ |
| uint32_t sampling_rate; /* 8k, 11.025k, 12k, 16k, 22.05k, 24k, 32k, |
| 44.1k, 48k, 64k, 88.2k, 96k */ |
| } audio_sbc_decoder_config_t; |
| |
| /* AAC decoder configuration structure. */ |
| typedef struct aac_dec_cfg_t aac_dec_cfg_t; |
| struct aac_dec_cfg_t { |
| uint32_t dec_format; |
| audio_aac_decoder_config_t data; |
| } __attribute__ ((packed)); |
| |
| /* SBC decoder configuration structure. */ |
| typedef struct sbc_dec_cfg_t sbc_dec_cfg_t; |
| struct sbc_dec_cfg_t { |
| uint32_t dec_format; |
| audio_sbc_decoder_config_t data; |
| } __attribute__ ((packed)); |
| |
| /* SBC encoder configuration structure. */ |
| typedef struct sbc_enc_cfg_t sbc_enc_cfg_t; |
| |
| /* supported num_subbands are 4/8 |
| * supported blk_len are 4, 8, 12, 16 |
| * supported channel_mode are MONO, STEREO, DUAL_MONO, JOINT_STEREO |
| * supported alloc_method are LOUNDNESS/SNR |
| * supported bit_rate for mono channel is max 320kbps |
| * supported bit rate for stereo channel is max 512 kbps |
| */ |
| struct sbc_enc_cfg_t{ |
| uint32_t enc_format; |
| uint32_t num_subbands; |
| uint32_t blk_len; |
| uint32_t channel_mode; |
| uint32_t alloc_method; |
| uint32_t bit_rate; |
| uint32_t sample_rate; |
| } __attribute__ ((packed)); |
| |
| |
| /* supported num_channels are Mono/Stereo |
| * supported channel_mapping for mono is CHANNEL_C |
| * supported channel mapping for stereo is CHANNEL_L and CHANNEL_R |
| * custom size and reserved are not used(for future enhancement) |
| */ |
| struct custom_enc_cfg_t |
| { |
| uint32_t enc_format; |
| uint32_t sample_rate; |
| uint16_t num_channels; |
| uint16_t reserved; |
| uint8_t channel_mapping[8]; |
| uint32_t custom_size; |
| } __attribute__ ((packed)); |
| |
| struct celt_specific_enc_cfg_t |
| { |
| uint32_t bit_rate; |
| uint16_t frame_size; |
| uint16_t complexity; |
| uint16_t prediction_mode; |
| uint16_t vbr_flag; |
| } __attribute__ ((packed)); |
| |
| struct celt_enc_cfg_t |
| { |
| struct custom_enc_cfg_t custom_cfg; |
| struct celt_specific_enc_cfg_t celt_cfg; |
| } __attribute__ ((packed)); |
| |
| /* sync_mode introduced with APTX V2 libraries |
| * sync mode: 0x0 = stereo sync mode |
| * 0x01 = dual mono sync mode |
| * 0x02 = dual mono with no sync on either L or R codewords |
| */ |
| struct aptx_v2_enc_cfg_ext_t |
| { |
| uint32_t sync_mode; |
| } __attribute__ ((packed)); |
| |
| /* APTX struct for combining custom enc and V2 fields */ |
| struct aptx_enc_cfg_t |
| { |
| struct custom_enc_cfg_t custom_cfg; |
| struct aptx_v2_enc_cfg_ext_t aptx_v2_cfg; |
| } __attribute__ ((packed)); |
| |
| struct ldac_specific_enc_cfg_t |
| { |
| uint32_t bit_rate; |
| uint16_t channel_mode; |
| uint16_t mtu; |
| } __attribute__ ((packed)); |
| |
| struct ldac_enc_cfg_t |
| { |
| struct custom_enc_cfg_t custom_cfg; |
| struct ldac_specific_enc_cfg_t ldac_cfg; |
| } __attribute__ ((packed)); |
| |
| /* In LE BT source code uses system/audio.h for below |
| * structure definition. To avoid multiple definition |
| * compilation error for audiohal in LE , masking structure |
| * definition under "LINUX_ENABLED" which is defined only |
| * in LE |
| */ |
| #ifndef LINUX_ENABLED |
| /* TODO: Define the following structures only for O using PLATFORM_VERSION */ |
| /* Information about BT SBC encoder configuration |
| * This data is used between audio HAL module and |
| * BT IPC library to configure DSP encoder |
| */ |
| typedef struct { |
| uint32_t subband; /* 4, 8 */ |
| uint32_t blk_len; /* 4, 8, 12, 16 */ |
| uint16_t sampling_rate; /*44.1khz,48khz*/ |
| uint8_t channels; /*0(Mono),1(Dual_mono),2(Stereo),3(JS)*/ |
| uint8_t alloc; /*0(Loudness),1(SNR)*/ |
| uint8_t min_bitpool; /* 2 */ |
| uint8_t max_bitpool; /*53(44.1khz),51 (48khz) */ |
| uint32_t bitrate; /* 320kbps to 512kbps */ |
| } audio_sbc_encoder_config; |
| |
| /* Information about BT APTX encoder configuration |
| * This data is used between audio HAL module and |
| * BT IPC library to configure DSP encoder |
| */ |
| typedef struct { |
| uint16_t sampling_rate; |
| uint8_t channels; |
| uint32_t bitrate; |
| } audio_aptx_default_config; |
| |
| typedef struct { |
| uint16_t sampling_rate; |
| uint8_t channels; |
| uint32_t bitrate; |
| uint32_t sync_mode; |
| } audio_aptx_dual_mono_config; |
| |
| typedef union { |
| audio_aptx_default_config *default_cfg; |
| audio_aptx_dual_mono_config *dual_mono_cfg; |
| } audio_aptx_encoder_config; |
| |
| /* Information about BT AAC encoder configuration |
| * This data is used between audio HAL module and |
| * BT IPC library to configure DSP encoder |
| */ |
| typedef struct { |
| uint32_t enc_mode; /* LC, SBR, PS */ |
| uint16_t format_flag; /* RAW, ADTS */ |
| uint16_t channels; /* 1-Mono, 2-Stereo */ |
| uint32_t sampling_rate; |
| uint32_t bitrate; |
| } audio_aac_encoder_config; |
| #endif |
| |
| /* Information about BT CELT encoder configuration |
| * This data is used between audio HAL module and |
| * BT IPC library to configure DSP encoder |
| */ |
| typedef struct { |
| uint32_t sampling_rate; /* 32000 - 48000, 48000 */ |
| uint16_t channels; /* 1-Mono, 2-Stereo, 2*/ |
| uint16_t frame_size; /* 64-128-256-512, 512 */ |
| uint16_t complexity; /* 0-10, 1 */ |
| uint16_t prediction_mode; /* 0-1-2, 0 */ |
| uint16_t vbr_flag; /* 0-1, 0*/ |
| uint32_t bitrate; /*32000 - 1536000, 139500*/ |
| } audio_celt_encoder_config; |
| |
| /* Information about BT LDAC encoder configuration |
| * This data is used between audio HAL module and |
| * BT IPC library to configure DSP encoder |
| */ |
| typedef struct { |
| uint32_t sampling_rate; /*44100,48000,88200,96000*/ |
| uint32_t bit_rate; /*303000,606000,909000(in bits per second)*/ |
| uint16_t channel_mode; /* 0, 4, 2, 1*/ |
| uint16_t mtu; /*679*/ |
| } audio_ldac_encoder_config; |
| |
| /*********** END of DSP configurable structures ********************/ |
| |
| /* API to identify DSP encoder captabilities */ |
| static void a2dp_offload_codec_cap_parser(char *value) |
| { |
| char *tok = NULL,*saveptr; |
| |
| tok = strtok_r(value, "-", &saveptr); |
| while (tok != NULL) { |
| if (strcmp(tok, "sbc") == 0) { |
| ALOGD("%s: SBC offload supported\n",__func__); |
| a2dp.is_a2dp_offload_supported = true; |
| break; |
| } else if (strcmp(tok, "aptx") == 0) { |
| ALOGD("%s: aptx offload supported\n",__func__); |
| a2dp.is_a2dp_offload_supported = true; |
| break; |
| } else if (strcmp(tok, "aptxtws") == 0) { |
| ALOGD("%s: aptx dual mono offload supported\n",__func__); |
| a2dp.is_a2dp_offload_supported = true; |
| break; |
| } else if (strcmp(tok, "aptxhd") == 0) { |
| ALOGD("%s: aptx HD offload supported\n",__func__); |
| a2dp.is_a2dp_offload_supported = true; |
| break; |
| } else if (strcmp(tok, "aac") == 0) { |
| ALOGD("%s: aac offload supported\n",__func__); |
| a2dp.is_a2dp_offload_supported = true; |
| break; |
| } else if (strcmp(tok, "celt") == 0) { |
| ALOGD("%s: celt offload supported\n",__func__); |
| a2dp.is_a2dp_offload_supported = true; |
| break; |
| } else if (strcmp(tok, "ldac") == 0) { |
| ALOGD("%s: ldac offload supported\n",__func__); |
| a2dp.is_a2dp_offload_supported = true; |
| break; |
| } |
| tok = strtok_r(NULL, "-", &saveptr); |
| }; |
| } |
| |
| static void update_offload_codec_capabilities() |
| { |
| char value[PROPERTY_VALUE_MAX] = {'\0'}; |
| |
| property_get("persist.vendor.bt.a2dp_offload_cap", value, "false"); |
| ALOGD("get_offload_codec_capabilities = %s",value); |
| a2dp.is_a2dp_offload_supported = |
| property_get_bool("persist.vendor.bt.a2dp_offload_cap", false); |
| if (strcmp(value, "false") != 0) |
| a2dp_offload_codec_cap_parser(value); |
| ALOGD("%s: codec cap = %s",__func__,value); |
| } |
| |
| /* API to open BT IPC library to start IPC communication for BT Source*/ |
| static void open_a2dp_source() |
| { |
| int ret = 0; |
| |
| ALOGD(" Open A2DP source start "); |
| if (a2dp.bt_lib_source_handle == NULL){ |
| ALOGD(" Requesting for BT lib handle"); |
| a2dp.bt_lib_source_handle = dlopen(BT_IPC_SOURCE_LIB_NAME, RTLD_NOW); |
| |
| if (a2dp.bt_lib_source_handle == NULL) { |
| ALOGE("%s: DLOPEN failed for %s", __func__, BT_IPC_SOURCE_LIB_NAME); |
| ret = -ENOSYS; |
| goto init_fail; |
| } else { |
| a2dp.audio_source_open = (audio_source_open_t) |
| dlsym(a2dp.bt_lib_source_handle, "audio_stream_open"); |
| a2dp.audio_source_start = (audio_source_start_t) |
| dlsym(a2dp.bt_lib_source_handle, "audio_start_stream"); |
| a2dp.audio_get_enc_config = (audio_get_enc_config_t) |
| dlsym(a2dp.bt_lib_source_handle, "audio_get_codec_config"); |
| a2dp.audio_source_suspend = (audio_source_suspend_t) |
| dlsym(a2dp.bt_lib_source_handle, "audio_suspend_stream"); |
| a2dp.audio_source_handoff_triggered = (audio_source_handoff_triggered_t) |
| dlsym(a2dp.bt_lib_source_handle, "audio_handoff_triggered"); |
| a2dp.clear_source_a2dpsuspend_flag = (clear_source_a2dpsuspend_flag_t) |
| dlsym(a2dp.bt_lib_source_handle, "clear_a2dpsuspend_flag"); |
| a2dp.audio_source_stop = (audio_source_stop_t) |
| dlsym(a2dp.bt_lib_source_handle, "audio_stop_stream"); |
| a2dp.audio_source_close = (audio_source_close_t) |
| dlsym(a2dp.bt_lib_source_handle, "audio_stream_close"); |
| a2dp.audio_source_check_a2dp_ready = (audio_source_check_a2dp_ready_t) |
| dlsym(a2dp.bt_lib_source_handle,"audio_check_a2dp_ready"); |
| a2dp.audio_sink_get_a2dp_latency = (audio_sink_get_a2dp_latency_t) |
| dlsym(a2dp.bt_lib_source_handle,"audio_sink_get_a2dp_latency"); |
| a2dp.audio_is_source_scrambling_enabled = (audio_is_source_scrambling_enabled_t) |
| dlsym(a2dp.bt_lib_source_handle,"audio_is_scrambling_enabled"); |
| } |
| } |
| |
| if (a2dp.bt_lib_source_handle && a2dp.audio_source_open) { |
| if (a2dp.bt_state_source == A2DP_STATE_DISCONNECTED) { |
| ALOGD("calling BT stream open"); |
| ret = a2dp.audio_source_open(); |
| if(ret != 0) { |
| ALOGE("Failed to open source stream for a2dp: status %d", ret); |
| goto init_fail; |
| } |
| a2dp.bt_state_source = A2DP_STATE_CONNECTED; |
| } else { |
| ALOGD("Called a2dp open with improper state, Ignoring request state %d", a2dp.bt_state_source); |
| } |
| } else { |
| ALOGE("a2dp handle is not identified, Ignoring open request"); |
| a2dp.bt_state_source = A2DP_STATE_DISCONNECTED; |
| goto init_fail; |
| } |
| |
| init_fail: |
| if(ret != 0 && (a2dp.bt_lib_source_handle != NULL)) { |
| dlclose(a2dp.bt_lib_source_handle); |
| a2dp.bt_lib_source_handle = NULL; |
| } |
| } |
| |
| /* API to open BT IPC library to start IPC communication for BT Sink*/ |
| static void open_a2dp_sink() |
| { |
| ALOGD(" Open A2DP input start "); |
| if (a2dp.bt_lib_sink_handle == NULL){ |
| ALOGD(" Requesting for BT lib handle"); |
| a2dp.bt_lib_sink_handle = dlopen(BT_IPC_SINK_LIB_NAME, RTLD_NOW); |
| |
| if (a2dp.bt_lib_sink_handle == NULL) { |
| ALOGE("%s: DLOPEN failed for %s", __func__, BT_IPC_SINK_LIB_NAME); |
| } else { |
| a2dp.audio_sink_start = (audio_sink_start_t) |
| dlsym(a2dp.bt_lib_sink_handle, "audio_sink_start_capture"); |
| a2dp.audio_get_dec_config = (audio_get_dec_config_t) |
| dlsym(a2dp.bt_lib_sink_handle, "audio_get_decoder_config"); |
| a2dp.audio_sink_stop = (audio_sink_stop_t) |
| dlsym(a2dp.bt_lib_sink_handle, "audio_sink_stop_capture"); |
| a2dp.audio_sink_check_a2dp_ready = (audio_sink_check_a2dp_ready_t) |
| dlsym(a2dp.bt_lib_sink_handle,"audio_sink_check_a2dp_ready"); |
| a2dp.audio_sink_session_setup_complete = (audio_sink_session_setup_complete_t) |
| dlsym(a2dp.bt_lib_sink_handle, "audio_sink_session_setup_complete"); |
| } |
| } |
| } |
| |
| static int close_a2dp_output() |
| { |
| ALOGV("%s\n",__func__); |
| |
| if (!(a2dp.bt_lib_source_handle && a2dp.audio_source_close)) { |
| ALOGE("a2dp source handle is not identified, Ignoring close request"); |
| return -ENOSYS; |
| } |
| |
| if (a2dp.bt_state_source != A2DP_STATE_DISCONNECTED) { |
| ALOGD("calling BT source stream close"); |
| if(a2dp.audio_source_close() == false) |
| ALOGE("failed close a2dp source control path from BT library"); |
| } |
| a2dp.a2dp_source_started = false; |
| a2dp.a2dp_source_total_active_session_requests = 0; |
| a2dp.a2dp_source_suspended = false; |
| a2dp.bt_encoder_format = CODEC_TYPE_INVALID; |
| a2dp.enc_sampling_rate = 48000; |
| a2dp.enc_channels = 2; |
| a2dp.bt_state_source = A2DP_STATE_DISCONNECTED; |
| |
| return 0; |
| } |
| |
| static int close_a2dp_input() |
| { |
| ALOGV("%s\n",__func__); |
| |
| if (!(a2dp.bt_lib_sink_handle && a2dp.audio_source_close)) { |
| ALOGE("a2dp sink handle is not identified, Ignoring close request"); |
| return -ENOSYS; |
| } |
| |
| if (a2dp.bt_state_sink != A2DP_STATE_DISCONNECTED) { |
| ALOGD("calling BT sink stream close"); |
| if(a2dp.audio_source_close() == false) |
| ALOGE("failed close a2dp sink control path from BT library"); |
| } |
| a2dp.a2dp_sink_started = false; |
| a2dp.a2dp_sink_total_active_session_requests = 0; |
| a2dp.bt_decoder_format = CODEC_TYPE_INVALID; |
| a2dp.dec_sampling_rate = 48000; |
| a2dp.dec_channels = 2; |
| a2dp.bt_state_sink = A2DP_STATE_DISCONNECTED; |
| |
| return 0; |
| } |
| |
| static void a2dp_check_and_set_scrambler() |
| { |
| bool scrambler_mode = false; |
| struct mixer_ctl *ctrl_scrambler_mode = NULL; |
| if (a2dp.audio_is_source_scrambling_enabled && (a2dp.bt_state_source != A2DP_STATE_DISCONNECTED)) |
| scrambler_mode = a2dp.audio_is_source_scrambling_enabled(); |
| |
| if (scrambler_mode) { |
| //enable scrambler in dsp |
| ctrl_scrambler_mode = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_SCRAMBLER_MODE); |
| if (!ctrl_scrambler_mode) { |
| ALOGE(" ERROR scrambler mode mixer control not identified"); |
| return; |
| } else { |
| if (mixer_ctl_set_value(ctrl_scrambler_mode, 0, true) != 0) { |
| ALOGE("%s: Could not set scrambler mode", __func__); |
| return; |
| } |
| } |
| } |
| } |
| |
| static bool a2dp_set_backend_cfg(uint8_t direction) |
| { |
| char *rate_str = NULL, *channels = NULL; |
| uint32_t sampling_rate; |
| struct mixer_ctl *ctl_sample_rate = NULL, *ctrl_channels = NULL; |
| bool is_configured = false; |
| |
| if (direction == SINK) { |
| sampling_rate = a2dp.dec_sampling_rate; |
| } else { |
| sampling_rate = a2dp.enc_sampling_rate; |
| } |
| //For LDAC encoder and AAC decoder open slimbus port at |
| //96Khz for 48Khz input and 88.2Khz for 44.1Khz input. |
| if (((a2dp.bt_encoder_format == CODEC_TYPE_LDAC) || |
| (a2dp.bt_decoder_format == AUDIO_FORMAT_AAC)) && |
| (sampling_rate == 48000 || sampling_rate == 44100 )) { |
| sampling_rate = sampling_rate *2; |
| } |
| |
| //Configure backend sampling rate |
| switch (sampling_rate) { |
| case 44100: |
| rate_str = "KHZ_44P1"; |
| break; |
| case 48000: |
| rate_str = "KHZ_48"; |
| break; |
| case 88200: |
| rate_str = "KHZ_88P2"; |
| break; |
| case 96000: |
| rate_str = "KHZ_96"; |
| break; |
| default: |
| rate_str = "KHZ_48"; |
| break; |
| } |
| |
| if (direction == SINK) { |
| ALOGD("%s: set sink backend sample rate =%s", __func__, rate_str); |
| ctl_sample_rate = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_SAMPLE_RATE_SINK); |
| } else { |
| ALOGD("%s: set source backend sample rate =%s", __func__, rate_str); |
| ctl_sample_rate = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_SAMPLE_RATE_SOURCE); |
| } |
| if (!ctl_sample_rate) { |
| ALOGE(" ERROR: backend sample rate mixer control not identified"); |
| } else { |
| if (mixer_ctl_set_enum_by_string(ctl_sample_rate, rate_str) != 0) { |
| ALOGE("%s: Failed to set backend sample rate =%s", __func__, rate_str); |
| is_configured = false; |
| goto fail; |
| } |
| } |
| |
| if (direction == SINK) { |
| switch (a2dp.dec_channels) { |
| case 1: |
| channels = "One"; |
| break; |
| case 2: |
| default: |
| channels = "Two"; |
| break; |
| } |
| |
| ALOGD("%s: set afe dec channels =%d", __func__, channels); |
| ctrl_channels = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_AFE_SINK_CHANNELS); |
| } else { |
| //Configure AFE enc channels |
| switch (a2dp.enc_channels) { |
| case 1: |
| channels = "One"; |
| break; |
| case 2: |
| default: |
| channels = "Two"; |
| break; |
| } |
| |
| ALOGD("%s: set afe enc channels =%d", __func__, channels); |
| ctrl_channels = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_AFE_IN_CHANNELS); |
| } |
| |
| if (!ctrl_channels) { |
| ALOGE(" ERROR AFE channels mixer control not identified"); |
| } else { |
| if (mixer_ctl_set_enum_by_string(ctrl_channels, channels) != 0) { |
| ALOGE("%s: Failed to set AFE channels =%d", __func__, channels); |
| is_configured = false; |
| goto fail; |
| } |
| } |
| is_configured = true; |
| fail: |
| return is_configured; |
| } |
| |
| bool configure_aac_dec_format(audio_aac_decoder_config_t *aac_bt_cfg) |
| { |
| struct mixer_ctl *ctl_dec_data = NULL, *ctrl_bit_format = NULL; |
| struct aac_dec_cfg_t aac_dsp_cfg; |
| bool is_configured = false; |
| int ret = 0; |
| |
| if(aac_bt_cfg == NULL) |
| return false; |
| |
| ctl_dec_data = mixer_get_ctl_by_name(a2dp.adev->mixer, MIXER_DEC_CONFIG_BLOCK); |
| if (!ctl_dec_data) { |
| ALOGE(" ERROR a2dp decoder CONFIG data mixer control not identified"); |
| is_configured = false; |
| goto fail; |
| } |
| |
| memset(&aac_dsp_cfg, 0x0, sizeof(struct aac_dec_cfg_t)); |
| aac_dsp_cfg.dec_format = MEDIA_FMT_AAC; |
| aac_dsp_cfg.data.aac_fmt_flag = aac_bt_cfg->aac_fmt_flag; |
| aac_dsp_cfg.data.channels = aac_bt_cfg->channels; |
| switch(aac_bt_cfg->audio_object_type) { |
| case 0: |
| aac_dsp_cfg.data.audio_object_type = MEDIA_FMT_AAC_AOT_LC; |
| break; |
| case 2: |
| aac_dsp_cfg.data.audio_object_type = MEDIA_FMT_AAC_AOT_PS; |
| break; |
| case 1: |
| default: |
| aac_dsp_cfg.data.audio_object_type = MEDIA_FMT_AAC_AOT_SBR; |
| break; |
| } |
| aac_dsp_cfg.data.total_size_of_pce_bits = aac_bt_cfg->total_size_of_pce_bits; |
| aac_dsp_cfg.data.sampling_rate = aac_bt_cfg->sampling_rate; |
| ret = mixer_ctl_set_array(ctl_dec_data, (void *)&aac_dsp_cfg, |
| sizeof(struct aac_dec_cfg_t)); |
| if (ret != 0) { |
| ALOGE("%s: failed to set AAC decoder config", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| |
| ctrl_bit_format = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_DEC_BIT_FORMAT); |
| if (!ctrl_bit_format) { |
| ALOGE(" ERROR Dec bit format mixer control not identified"); |
| is_configured = false; |
| goto fail; |
| } |
| ret = mixer_ctl_set_enum_by_string(ctrl_bit_format, "S16_LE"); |
| if (ret != 0) { |
| ALOGE("%s: Failed to set bit format to decoder", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| |
| is_configured = true; |
| a2dp.bt_decoder_format = CODEC_TYPE_AAC; |
| a2dp.dec_channels = aac_dsp_cfg.data.channels; |
| a2dp.dec_sampling_rate = aac_dsp_cfg.data.sampling_rate; |
| ALOGV("Successfully updated AAC dec format with sampling_rate: %d channels:%d", |
| aac_dsp_cfg.data.sampling_rate, aac_dsp_cfg.data.channels); |
| fail: |
| return is_configured; |
| } |
| |
| bool configure_sbc_dec_format(audio_sbc_decoder_config_t *sbc_bt_cfg) |
| { |
| struct mixer_ctl *ctl_dec_data = NULL, *ctrl_bit_format = NULL; |
| struct sbc_dec_cfg_t sbc_dsp_cfg; |
| bool is_configured = false; |
| int ret = 0; |
| |
| if(sbc_bt_cfg == NULL) |
| goto fail; |
| |
| ctl_dec_data = mixer_get_ctl_by_name(a2dp.adev->mixer, MIXER_DEC_CONFIG_BLOCK); |
| if (!ctl_dec_data) { |
| ALOGE(" ERROR a2dp decoder CONFIG data mixer control not identified"); |
| is_configured = false; |
| goto fail; |
| } |
| |
| memset(&sbc_dsp_cfg, 0x0, sizeof(struct sbc_dec_cfg_t)); |
| sbc_dsp_cfg.dec_format = MEDIA_FMT_SBC; |
| sbc_dsp_cfg.data.channels = sbc_bt_cfg->channels; |
| sbc_dsp_cfg.data.sampling_rate = sbc_bt_cfg->sampling_rate; |
| ret = mixer_ctl_set_array(ctl_dec_data, (void *)&sbc_dsp_cfg, |
| sizeof(struct sbc_dec_cfg_t)); |
| if (ret != 0) { |
| ALOGE("%s: failed to set SBC decoder config", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| |
| ctrl_bit_format = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_DEC_BIT_FORMAT); |
| if (!ctrl_bit_format) { |
| ALOGE(" ERROR Dec bit format mixer control not identified"); |
| is_configured = false; |
| goto fail; |
| } |
| ret = mixer_ctl_set_enum_by_string(ctrl_bit_format, "S16_LE"); |
| if (ret != 0) { |
| ALOGE("%s: Failed to set bit format to decoder", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| |
| is_configured = true; |
| a2dp.bt_decoder_format = CODEC_TYPE_SBC; |
| if (sbc_dsp_cfg.data.channels == MEDIA_FMT_SBC_CHANNEL_MODE_MONO) |
| a2dp.dec_channels = 1; |
| else |
| a2dp.dec_channels = 2; |
| a2dp.dec_sampling_rate = sbc_dsp_cfg.data.sampling_rate; |
| ALOGV("Successfully updated SBC dec format"); |
| fail: |
| return is_configured; |
| } |
| |
| static void a2dp_reset_backend_cfg(uint8_t direction) |
| { |
| char *rate_str = "KHZ_8", *channels = "Zero"; |
| struct mixer_ctl *ctl_sample_rate = NULL, *ctrl_channels = NULL; |
| |
| if (direction == SINK) { |
| ALOGD("%s: reset sink backend sample rate =%s", __func__, rate_str); |
| ctl_sample_rate = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_SAMPLE_RATE_SINK); |
| } else { |
| ALOGD("%s: reset source backend sample rate =%s", __func__, rate_str); |
| ctl_sample_rate = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_SAMPLE_RATE_SOURCE); |
| } |
| if (!ctl_sample_rate) { |
| ALOGE(" ERROR: backend sample rate mixer control not identified"); |
| } else { |
| if (mixer_ctl_set_enum_by_string(ctl_sample_rate, rate_str) != 0) { |
| ALOGE("%s: Failed to reset backend sample rate = %s", __func__, rate_str); |
| } |
| } |
| |
| if (direction == SINK) { |
| ALOGD("%s: reset afe sink channels =%s", __func__, channels); |
| ctrl_channels = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_AFE_SINK_CHANNELS); |
| } else { |
| ALOGD("%s: reset afe source channels =%s", __func__, channels); |
| ctrl_channels = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_AFE_IN_CHANNELS); |
| } |
| if (!ctrl_channels) { |
| ALOGE(" ERROR AFE channel mixer control not identified"); |
| return; |
| } else { |
| if (mixer_ctl_set_enum_by_string(ctrl_channels, channels) != 0) { |
| ALOGE("%s: Failed to reset AFE channels", __func__); |
| return; |
| } |
| } |
| } |
| |
| /* API to configure AFE decoder in DSP */ |
| static bool configure_a2dp_dsp_decoder_format() |
| { |
| void *codec_info = NULL; |
| codec_t codec_type = CODEC_TYPE_INVALID; |
| bool is_configured = false; |
| struct mixer_ctl *ctl_dec_data = NULL; |
| int ret = 0; |
| |
| if (!a2dp.audio_get_dec_config) { |
| ALOGE(" a2dp handle is not identified, ignoring a2dp decoder config"); |
| return false; |
| } |
| |
| ctl_dec_data = mixer_get_ctl_by_name(a2dp.adev->mixer, MIXER_DEC_CONFIG_BLOCK); |
| if (!ctl_dec_data) { |
| ALOGE(" ERROR a2dp decoder CONFIG data mixer control not identified"); |
| is_configured = false; |
| return false; |
| } |
| codec_info = a2dp.audio_get_dec_config(&codec_type); |
| switch(codec_type) { |
| case CODEC_TYPE_SBC: |
| ALOGD(" SBC decoder supported BT device"); |
| is_configured = configure_sbc_dec_format((audio_sbc_decoder_config_t *)codec_info); |
| break; |
| case CODEC_TYPE_AAC: |
| ALOGD(" AAC decoder supported BT device"); |
| is_configured = |
| configure_aac_dec_format((audio_aac_decoder_config_t *)codec_info); |
| break; |
| default: |
| ALOGD(" Received Unsupported decoder format"); |
| is_configured = false; |
| break; |
| } |
| return is_configured; |
| } |
| |
| /* API to configure SBC DSP encoder */ |
| bool configure_sbc_enc_format(audio_sbc_encoder_config *sbc_bt_cfg) |
| { |
| struct mixer_ctl *ctl_enc_data = NULL, *ctrl_bit_format = NULL; |
| struct sbc_enc_cfg_t sbc_dsp_cfg; |
| bool is_configured = false; |
| int ret = 0; |
| |
| if(sbc_bt_cfg == NULL) |
| return false; |
| |
| ctl_enc_data = mixer_get_ctl_by_name(a2dp.adev->mixer, MIXER_ENC_CONFIG_BLOCK); |
| if (!ctl_enc_data) { |
| ALOGE(" ERROR a2dp encoder CONFIG data mixer control not identified"); |
| is_configured = false; |
| goto fail; |
| } |
| memset(&sbc_dsp_cfg, 0x0, sizeof(struct sbc_enc_cfg_t)); |
| sbc_dsp_cfg.enc_format = MEDIA_FMT_SBC; |
| sbc_dsp_cfg.num_subbands = sbc_bt_cfg->subband; |
| sbc_dsp_cfg.blk_len = sbc_bt_cfg->blk_len; |
| switch(sbc_bt_cfg->channels) { |
| case 0: |
| sbc_dsp_cfg.channel_mode = MEDIA_FMT_SBC_CHANNEL_MODE_MONO; |
| break; |
| case 1: |
| sbc_dsp_cfg.channel_mode = MEDIA_FMT_SBC_CHANNEL_MODE_DUAL_MONO; |
| break; |
| case 3: |
| sbc_dsp_cfg.channel_mode = MEDIA_FMT_SBC_CHANNEL_MODE_JOINT_STEREO; |
| break; |
| case 2: |
| default: |
| sbc_dsp_cfg.channel_mode = MEDIA_FMT_SBC_CHANNEL_MODE_STEREO; |
| break; |
| } |
| if (sbc_bt_cfg->alloc) |
| sbc_dsp_cfg.alloc_method = MEDIA_FMT_SBC_ALLOCATION_METHOD_LOUDNESS; |
| else |
| sbc_dsp_cfg.alloc_method = MEDIA_FMT_SBC_ALLOCATION_METHOD_SNR; |
| sbc_dsp_cfg.bit_rate = sbc_bt_cfg->bitrate; |
| sbc_dsp_cfg.sample_rate = sbc_bt_cfg->sampling_rate; |
| ret = mixer_ctl_set_array(ctl_enc_data, (void *)&sbc_dsp_cfg, |
| sizeof(struct sbc_enc_cfg_t)); |
| if (ret != 0) { |
| ALOGE("%s: failed to set SBC encoder config", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| ctrl_bit_format = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_ENC_BIT_FORMAT); |
| if (!ctrl_bit_format) { |
| ALOGE(" ERROR bit format CONFIG data mixer control not identified"); |
| is_configured = false; |
| goto fail; |
| } |
| ret = mixer_ctl_set_enum_by_string(ctrl_bit_format, "S16_LE"); |
| if (ret != 0) { |
| ALOGE("%s: Failed to set bit format to encoder", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| is_configured = true; |
| a2dp.bt_encoder_format = CODEC_TYPE_SBC; |
| a2dp.enc_sampling_rate = sbc_bt_cfg->sampling_rate; |
| |
| if (sbc_dsp_cfg.channel_mode == MEDIA_FMT_SBC_CHANNEL_MODE_MONO) |
| a2dp.enc_channels = 1; |
| else |
| a2dp.enc_channels = 2; |
| |
| ALOGV("Successfully updated SBC enc format with samplingrate: %d channelmode:%d", |
| sbc_dsp_cfg.sample_rate, sbc_dsp_cfg.channel_mode); |
| fail: |
| return is_configured; |
| } |
| |
| #ifndef LINUX_ENABLED |
| static int update_aptx_dsp_config_v2(struct aptx_enc_cfg_t *aptx_dsp_cfg, |
| audio_aptx_encoder_config *aptx_bt_cfg) |
| { |
| int ret = 0; |
| |
| if(aptx_dsp_cfg == NULL || aptx_bt_cfg == NULL) { |
| ALOGE("Invalid param, aptx_dsp_cfg %p aptx_bt_cfg %p", |
| aptx_dsp_cfg, aptx_bt_cfg); |
| return -EINVAL; |
| } |
| |
| memset(aptx_dsp_cfg, 0x0, sizeof(struct aptx_enc_cfg_t)); |
| aptx_dsp_cfg->custom_cfg.enc_format = MEDIA_FMT_APTX; |
| |
| if (!a2dp.is_aptx_dual_mono_supported) { |
| aptx_dsp_cfg->custom_cfg.sample_rate = aptx_bt_cfg->default_cfg->sampling_rate; |
| aptx_dsp_cfg->custom_cfg.num_channels = aptx_bt_cfg->default_cfg->channels; |
| } else { |
| aptx_dsp_cfg->custom_cfg.sample_rate = aptx_bt_cfg->dual_mono_cfg->sampling_rate; |
| aptx_dsp_cfg->custom_cfg.num_channels = aptx_bt_cfg->dual_mono_cfg->channels; |
| aptx_dsp_cfg->aptx_v2_cfg.sync_mode = aptx_bt_cfg->dual_mono_cfg->sync_mode; |
| } |
| |
| switch(aptx_dsp_cfg->custom_cfg.num_channels) { |
| case 1: |
| aptx_dsp_cfg->custom_cfg.channel_mapping[0] = PCM_CHANNEL_C; |
| break; |
| case 2: |
| default: |
| aptx_dsp_cfg->custom_cfg.channel_mapping[0] = PCM_CHANNEL_L; |
| aptx_dsp_cfg->custom_cfg.channel_mapping[1] = PCM_CHANNEL_R; |
| break; |
| } |
| a2dp.enc_channels = aptx_dsp_cfg->custom_cfg.num_channels; |
| if (!a2dp.is_aptx_dual_mono_supported) { |
| a2dp.enc_sampling_rate = aptx_bt_cfg->default_cfg->sampling_rate; |
| ALOGV("Successfully updated APTX enc format with samplingrate: %d \ |
| channels:%d", aptx_dsp_cfg->custom_cfg.sample_rate, |
| aptx_dsp_cfg->custom_cfg.num_channels); |
| } else { |
| a2dp.enc_sampling_rate = aptx_bt_cfg->dual_mono_cfg->sampling_rate; |
| ALOGV("Successfully updated APTX dual mono enc format with \ |
| samplingrate: %d channels:%d syncmode %d", |
| aptx_dsp_cfg->custom_cfg.sample_rate, |
| aptx_dsp_cfg->custom_cfg.num_channels, |
| aptx_dsp_cfg->aptx_v2_cfg.sync_mode); |
| } |
| return ret; |
| } |
| #else |
| static int update_aptx_dsp_config_v1(struct custom_enc_cfg_t *aptx_dsp_cfg, |
| audio_aptx_encoder_config *aptx_bt_cfg) |
| { |
| int ret = 0; |
| |
| if(aptx_dsp_cfg == NULL || aptx_bt_cfg == NULL) { |
| ALOGE("Invalid param, aptx_dsp_cfg %p aptx_bt_cfg %p", |
| aptx_dsp_cfg, aptx_bt_cfg); |
| return -EINVAL; |
| } |
| |
| memset(&aptx_dsp_cfg, 0x0, sizeof(struct custom_enc_cfg_t)); |
| aptx_dsp_cfg->enc_format = MEDIA_FMT_APTX; |
| aptx_dsp_cfg->sample_rate = aptx_bt_cfg->sampling_rate; |
| aptx_dsp_cfg->num_channels = aptx_bt_cfg->channels; |
| switch(aptx_dsp_cfg->num_channels) { |
| case 1: |
| aptx_dsp_cfg->channel_mapping[0] = PCM_CHANNEL_C; |
| break; |
| case 2: |
| default: |
| aptx_dsp_cfg->channel_mapping[0] = PCM_CHANNEL_L; |
| aptx_dsp_cfg->channel_mapping[1] = PCM_CHANNEL_R; |
| break; |
| } |
| |
| ALOGV("Updated APTX enc format with samplingrate: %d channels:%d", |
| aptx_dsp_cfg->sample_rate, aptx_dsp_cfg->num_channels); |
| |
| return ret; |
| } |
| #endif |
| |
| /* API to configure APTX DSP encoder */ |
| bool configure_aptx_enc_format(audio_aptx_encoder_config *aptx_bt_cfg) |
| { |
| struct mixer_ctl *ctl_enc_data = NULL, *ctrl_bit_format = NULL; |
| int mixer_size; |
| bool is_configured = false; |
| int ret = 0; |
| int sample_rate_backup; |
| |
| if(aptx_bt_cfg == NULL) |
| return false; |
| |
| #ifndef LINUX_ENABLED |
| struct aptx_enc_cfg_t aptx_dsp_cfg; |
| mixer_size = sizeof(struct aptx_enc_cfg_t); |
| sample_rate_backup = aptx_bt_cfg->default_cfg->sampling_rate; |
| #else |
| struct custom_enc_cfg_t aptx_dsp_cfg; |
| mixer_size = sizeof(struct custom_enc_cfg_t); |
| sample_rate_backup = aptx_bt_cfg->sampling_rate; |
| #endif |
| |
| ctl_enc_data = mixer_get_ctl_by_name(a2dp.adev->mixer, MIXER_ENC_CONFIG_BLOCK); |
| if (!ctl_enc_data) { |
| ALOGE(" ERROR a2dp encoder CONFIG data mixer control not identified"); |
| is_configured = false; |
| goto fail; |
| } |
| |
| #ifndef LINUX_ENABLED |
| ret = update_aptx_dsp_config_v2(&aptx_dsp_cfg, aptx_bt_cfg); |
| #else |
| ret = update_aptx_dsp_config_v1(&aptx_dsp_cfg, aptx_bt_cfg); |
| #endif |
| |
| if (ret) { |
| is_configured = false; |
| goto fail; |
| } |
| ret = mixer_ctl_set_array(ctl_enc_data, (void *)&aptx_dsp_cfg, |
| mixer_size); |
| if (ret != 0) { |
| ALOGE("%s: Failed to set APTX encoder config", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| ctrl_bit_format = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_ENC_BIT_FORMAT); |
| if (!ctrl_bit_format) { |
| ALOGE("ERROR bit format CONFIG data mixer control not identified"); |
| is_configured = false; |
| goto fail; |
| } else { |
| ret = mixer_ctl_set_enum_by_string(ctrl_bit_format, "S16_LE"); |
| if (ret != 0) { |
| ALOGE("%s: Failed to set bit format to encoder", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| } |
| is_configured = true; |
| a2dp.bt_encoder_format = CODEC_TYPE_APTX; |
| fail: |
| /*restore sample rate */ |
| if(!is_configured) |
| a2dp.enc_sampling_rate = sample_rate_backup; |
| return is_configured; |
| } |
| |
| /* API to configure APTX HD DSP encoder |
| */ |
| #ifndef LINUX_ENABLED |
| bool configure_aptx_hd_enc_format(audio_aptx_default_config *aptx_bt_cfg) |
| #else |
| bool configure_aptx_hd_enc_format(audio_aptx_encoder_config *aptx_bt_cfg) |
| #endif |
| { |
| struct mixer_ctl *ctl_enc_data = NULL, *ctrl_bit_format = NULL; |
| struct custom_enc_cfg_t aptx_dsp_cfg; |
| bool is_configured = false; |
| int ret = 0; |
| |
| if(aptx_bt_cfg == NULL) |
| return false; |
| |
| ctl_enc_data = mixer_get_ctl_by_name(a2dp.adev->mixer, MIXER_ENC_CONFIG_BLOCK); |
| if (!ctl_enc_data) { |
| ALOGE(" ERROR a2dp encoder CONFIG data mixer control not identified"); |
| is_configured = false; |
| goto fail; |
| } |
| |
| memset(&aptx_dsp_cfg, 0x0, sizeof(struct custom_enc_cfg_t)); |
| aptx_dsp_cfg.enc_format = MEDIA_FMT_APTX_HD; |
| aptx_dsp_cfg.sample_rate = aptx_bt_cfg->sampling_rate; |
| aptx_dsp_cfg.num_channels = aptx_bt_cfg->channels; |
| switch(aptx_dsp_cfg.num_channels) { |
| case 1: |
| aptx_dsp_cfg.channel_mapping[0] = PCM_CHANNEL_C; |
| break; |
| case 2: |
| default: |
| aptx_dsp_cfg.channel_mapping[0] = PCM_CHANNEL_L; |
| aptx_dsp_cfg.channel_mapping[1] = PCM_CHANNEL_R; |
| break; |
| } |
| ret = mixer_ctl_set_array(ctl_enc_data, (void *)&aptx_dsp_cfg, |
| sizeof(struct custom_enc_cfg_t)); |
| if (ret != 0) { |
| ALOGE("%s: Failed to set APTX HD encoder config", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| ctrl_bit_format = mixer_get_ctl_by_name(a2dp.adev->mixer, MIXER_ENC_BIT_FORMAT); |
| if (!ctrl_bit_format) { |
| ALOGE(" ERROR bit format CONFIG data mixer control not identified"); |
| is_configured = false; |
| goto fail; |
| } |
| ret = mixer_ctl_set_enum_by_string(ctrl_bit_format, "S24_LE"); |
| if (ret != 0) { |
| ALOGE("%s: Failed to set APTX HD encoder config", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| is_configured = true; |
| a2dp.bt_encoder_format = CODEC_TYPE_APTX_HD; |
| a2dp.enc_sampling_rate = aptx_bt_cfg->sampling_rate; |
| a2dp.enc_channels = aptx_bt_cfg->channels; |
| ALOGV("Successfully updated APTX HD encformat with samplingrate: %d channels:%d", |
| aptx_dsp_cfg.sample_rate, aptx_dsp_cfg.num_channels); |
| fail: |
| return is_configured; |
| } |
| |
| /* API to configure AAC DSP encoder */ |
| bool configure_aac_enc_format(audio_aac_encoder_config *aac_bt_cfg) |
| { |
| struct mixer_ctl *ctl_enc_data = NULL, *ctrl_bit_format = NULL; |
| struct aac_enc_cfg_t aac_dsp_cfg; |
| bool is_configured = false; |
| int ret = 0; |
| |
| if(aac_bt_cfg == NULL) |
| return false; |
| |
| ctl_enc_data = mixer_get_ctl_by_name(a2dp.adev->mixer, MIXER_ENC_CONFIG_BLOCK); |
| if (!ctl_enc_data) { |
| ALOGE(" ERROR a2dp encoder CONFIG data mixer control not identified"); |
| is_configured = false; |
| goto fail; |
| } |
| memset(&aac_dsp_cfg, 0x0, sizeof(struct aac_enc_cfg_t)); |
| aac_dsp_cfg.enc_format = MEDIA_FMT_AAC; |
| aac_dsp_cfg.bit_rate = aac_bt_cfg->bitrate; |
| aac_dsp_cfg.sample_rate = aac_bt_cfg->sampling_rate; |
| switch(aac_bt_cfg->enc_mode) { |
| case 0: |
| aac_dsp_cfg.enc_mode = MEDIA_FMT_AAC_AOT_LC; |
| break; |
| case 2: |
| aac_dsp_cfg.enc_mode = MEDIA_FMT_AAC_AOT_PS; |
| break; |
| case 1: |
| default: |
| aac_dsp_cfg.enc_mode = MEDIA_FMT_AAC_AOT_SBR; |
| break; |
| } |
| aac_dsp_cfg.aac_fmt_flag = aac_bt_cfg->format_flag; |
| aac_dsp_cfg.channel_cfg = aac_bt_cfg->channels; |
| ret = mixer_ctl_set_array(ctl_enc_data, (void *)&aac_dsp_cfg, |
| sizeof(struct aac_enc_cfg_t)); |
| if (ret != 0) { |
| ALOGE("%s: failed to set SBC encoder config", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| ctrl_bit_format = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_ENC_BIT_FORMAT); |
| if (!ctrl_bit_format) { |
| is_configured = false; |
| ALOGE(" ERROR bit format CONFIG data mixer control not identified"); |
| goto fail; |
| } |
| ret = mixer_ctl_set_enum_by_string(ctrl_bit_format, "S16_LE"); |
| if (ret != 0) { |
| ALOGE("%s: Failed to set bit format to encoder", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| is_configured = true; |
| a2dp.bt_encoder_format = CODEC_TYPE_AAC; |
| a2dp.enc_sampling_rate = aac_bt_cfg->sampling_rate; |
| a2dp.enc_channels = aac_bt_cfg->channels; |
| ALOGV("Successfully updated AAC enc format with samplingrate: %d channels:%d", |
| aac_dsp_cfg.sample_rate, aac_dsp_cfg.channel_cfg); |
| fail: |
| return is_configured; |
| } |
| |
| bool configure_celt_enc_format(audio_celt_encoder_config *celt_bt_cfg) |
| { |
| struct mixer_ctl *ctl_enc_data = NULL, *ctrl_bit_format = NULL; |
| struct celt_enc_cfg_t celt_dsp_cfg; |
| bool is_configured = false; |
| int ret = 0; |
| if(celt_bt_cfg == NULL) |
| return false; |
| |
| ctl_enc_data = mixer_get_ctl_by_name(a2dp.adev->mixer, MIXER_ENC_CONFIG_BLOCK); |
| if (!ctl_enc_data) { |
| ALOGE(" ERROR a2dp encoder CONFIG data mixer control not identified"); |
| is_configured = false; |
| goto fail; |
| } |
| memset(&celt_dsp_cfg, 0x0, sizeof(struct celt_enc_cfg_t)); |
| |
| celt_dsp_cfg.custom_cfg.enc_format = MEDIA_FMT_CELT; |
| celt_dsp_cfg.custom_cfg.sample_rate = celt_bt_cfg->sampling_rate; |
| celt_dsp_cfg.custom_cfg.num_channels = celt_bt_cfg->channels; |
| switch(celt_dsp_cfg.custom_cfg.num_channels) { |
| case 1: |
| celt_dsp_cfg.custom_cfg.channel_mapping[0] = PCM_CHANNEL_C; |
| break; |
| case 2: |
| default: |
| celt_dsp_cfg.custom_cfg.channel_mapping[0] = PCM_CHANNEL_L; |
| celt_dsp_cfg.custom_cfg.channel_mapping[1] = PCM_CHANNEL_R; |
| break; |
| } |
| |
| celt_dsp_cfg.custom_cfg.custom_size = sizeof(struct celt_enc_cfg_t); |
| |
| celt_dsp_cfg.celt_cfg.frame_size = celt_bt_cfg->frame_size; |
| celt_dsp_cfg.celt_cfg.complexity = celt_bt_cfg->complexity; |
| celt_dsp_cfg.celt_cfg.prediction_mode = celt_bt_cfg->prediction_mode; |
| celt_dsp_cfg.celt_cfg.vbr_flag = celt_bt_cfg->vbr_flag; |
| celt_dsp_cfg.celt_cfg.bit_rate = celt_bt_cfg->bitrate; |
| |
| ret = mixer_ctl_set_array(ctl_enc_data, (void *)&celt_dsp_cfg, |
| sizeof(struct celt_enc_cfg_t)); |
| if (ret != 0) { |
| ALOGE("%s: Failed to set CELT encoder config", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| ctrl_bit_format = mixer_get_ctl_by_name(a2dp.adev->mixer, MIXER_ENC_BIT_FORMAT); |
| if (!ctrl_bit_format) { |
| ALOGE(" ERROR bit format CONFIG data mixer control not identified"); |
| is_configured = false; |
| goto fail; |
| } |
| ret = mixer_ctl_set_enum_by_string(ctrl_bit_format, "S16_LE"); |
| if (ret != 0) { |
| ALOGE("%s: Failed to set bit format to encoder", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| is_configured = true; |
| a2dp.bt_encoder_format = CODEC_TYPE_CELT; |
| a2dp.enc_sampling_rate = celt_bt_cfg->sampling_rate; |
| a2dp.enc_channels = celt_bt_cfg->channels; |
| ALOGV("Successfully updated CELT encformat with samplingrate: %d channels:%d", |
| celt_dsp_cfg.custom_cfg.sample_rate, celt_dsp_cfg.custom_cfg.num_channels); |
| fail: |
| return is_configured; |
| } |
| |
| bool configure_ldac_enc_format(audio_ldac_encoder_config *ldac_bt_cfg) |
| { |
| struct mixer_ctl *ldac_enc_data = NULL, *ctrl_bit_format = NULL; |
| struct ldac_enc_cfg_t ldac_dsp_cfg; |
| bool is_configured = false; |
| int ret = 0; |
| if(ldac_bt_cfg == NULL) |
| return false; |
| |
| ldac_enc_data = mixer_get_ctl_by_name(a2dp.adev->mixer, MIXER_ENC_CONFIG_BLOCK); |
| if (!ldac_enc_data) { |
| ALOGE(" ERROR a2dp encoder CONFIG data mixer control not identified"); |
| is_configured = false; |
| goto fail; |
| } |
| memset(&ldac_dsp_cfg, 0x0, sizeof(struct ldac_enc_cfg_t)); |
| |
| ldac_dsp_cfg.custom_cfg.enc_format = MEDIA_FMT_LDAC; |
| ldac_dsp_cfg.custom_cfg.sample_rate = ldac_bt_cfg->sampling_rate; |
| ldac_dsp_cfg.ldac_cfg.channel_mode = ldac_bt_cfg->channel_mode; |
| switch(ldac_dsp_cfg.ldac_cfg.channel_mode) { |
| case 4: |
| ldac_dsp_cfg.custom_cfg.channel_mapping[0] = PCM_CHANNEL_C; |
| ldac_dsp_cfg.custom_cfg.num_channels = 1; |
| break; |
| case 2: |
| case 1: |
| default: |
| ldac_dsp_cfg.custom_cfg.channel_mapping[0] = PCM_CHANNEL_L; |
| ldac_dsp_cfg.custom_cfg.channel_mapping[1] = PCM_CHANNEL_R; |
| ldac_dsp_cfg.custom_cfg.num_channels = 2; |
| break; |
| } |
| |
| ldac_dsp_cfg.custom_cfg.custom_size = sizeof(struct ldac_enc_cfg_t); |
| ldac_dsp_cfg.ldac_cfg.mtu = ldac_bt_cfg->mtu; |
| ldac_dsp_cfg.ldac_cfg.bit_rate = ldac_bt_cfg->bit_rate; |
| ret = mixer_ctl_set_array(ldac_enc_data, (void *)&ldac_dsp_cfg, |
| sizeof(struct ldac_enc_cfg_t)); |
| if (ret != 0) { |
| ALOGE("%s: Failed to set LDAC encoder config", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| ctrl_bit_format = mixer_get_ctl_by_name(a2dp.adev->mixer, MIXER_ENC_BIT_FORMAT); |
| if (!ctrl_bit_format) { |
| ALOGE(" ERROR bit format CONFIG data mixer control not identified"); |
| is_configured = false; |
| goto fail; |
| } |
| ret = mixer_ctl_set_enum_by_string(ctrl_bit_format, "S16_LE"); |
| if (ret != 0) { |
| ALOGE("%s: Failed to set bit format to encoder", __func__); |
| is_configured = false; |
| goto fail; |
| } |
| is_configured = true; |
| a2dp.bt_encoder_format = CODEC_TYPE_LDAC; |
| a2dp.enc_sampling_rate = ldac_bt_cfg->sampling_rate; |
| a2dp.enc_channels = ldac_dsp_cfg.custom_cfg.num_channels; |
| ALOGV("Successfully updated LDAC encformat with samplingrate: %d channels:%d", |
| ldac_dsp_cfg.custom_cfg.sample_rate, ldac_dsp_cfg.custom_cfg.num_channels); |
| fail: |
| return is_configured; |
| } |
| |
| bool configure_a2dp_encoder_format() |
| { |
| void *codec_info = NULL; |
| uint8_t multi_cast = 0, num_dev = 1; |
| codec_t codec_type = CODEC_TYPE_INVALID; |
| bool is_configured = false; |
| audio_aptx_encoder_config aptx_encoder_cfg; |
| |
| if (!a2dp.audio_get_enc_config) { |
| ALOGE(" a2dp handle is not identified, ignoring a2dp encoder config"); |
| return false; |
| } |
| ALOGD("configure_a2dp_encoder_format start"); |
| codec_info = a2dp.audio_get_enc_config(&multi_cast, &num_dev, |
| &codec_type); |
| |
| switch(codec_type) { |
| case CODEC_TYPE_SBC: |
| ALOGD(" Received SBC encoder supported BT device"); |
| is_configured = |
| configure_sbc_enc_format((audio_sbc_encoder_config *)codec_info); |
| break; |
| case CODEC_TYPE_APTX: |
| ALOGD(" Received APTX encoder supported BT device"); |
| #ifndef LINUX_ENABLED |
| a2dp.is_aptx_dual_mono_supported = false; |
| aptx_encoder_cfg.default_cfg = (audio_aptx_default_config *)codec_info; |
| #endif |
| is_configured = |
| configure_aptx_enc_format(&aptx_encoder_cfg); |
| break; |
| case CODEC_TYPE_APTX_HD: |
| ALOGD(" Received APTX HD encoder supported BT device"); |
| #ifndef LINUX_ENABLED |
| is_configured = |
| configure_aptx_hd_enc_format((audio_aptx_default_config *)codec_info); |
| #else |
| is_configured = |
| configure_aptx_hd_enc_format((audio_aptx_encoder_config *)codec_info); |
| #endif |
| break; |
| #ifndef LINUX_ENABLED |
| case CODEC_TYPE_APTX_DUAL_MONO: |
| ALOGD(" Received APTX dual mono encoder supported BT device"); |
| a2dp.is_aptx_dual_mono_supported = true; |
| aptx_encoder_cfg.dual_mono_cfg = (audio_aptx_dual_mono_config *)codec_info; |
| is_configured = |
| configure_aptx_enc_format(&aptx_encoder_cfg); |
| break; |
| #endif |
| case CODEC_TYPE_AAC: |
| ALOGD(" Received AAC encoder supported BT device"); |
| is_configured = |
| configure_aac_enc_format((audio_aac_encoder_config *)codec_info); |
| break; |
| case CODEC_TYPE_CELT: |
| ALOGD(" Received CELT encoder supported BT device"); |
| is_configured = |
| configure_celt_enc_format((audio_celt_encoder_config *)codec_info); |
| break; |
| case CODEC_TYPE_LDAC: |
| ALOGD(" Received LDAC encoder supported BT device"); |
| is_configured = |
| configure_ldac_enc_format((audio_ldac_encoder_config *)codec_info); |
| break; |
| default: |
| ALOGD(" Received Unsupported encoder formar"); |
| is_configured = false; |
| break; |
| } |
| return is_configured; |
| } |
| |
| int audio_extn_a2dp_start_playback() |
| { |
| int ret = 0; |
| |
| ALOGD("audio_extn_a2dp_start_playback start"); |
| |
| if(!(a2dp.bt_lib_source_handle && a2dp.audio_source_start |
| && a2dp.audio_get_enc_config)) { |
| ALOGE("a2dp handle is not identified, Ignoring start playback request"); |
| return -ENOSYS; |
| } |
| |
| if(a2dp.a2dp_source_suspended == true) { |
| //session will be restarted after suspend completion |
| ALOGD("a2dp start requested during suspend state"); |
| return -ENOSYS; |
| } |
| |
| if (!a2dp.a2dp_source_started && !a2dp.a2dp_source_total_active_session_requests) { |
| ALOGD("calling BT module stream start"); |
| /* This call indicates BT IPC lib to start playback */ |
| ret = a2dp.audio_source_start(); |
| ALOGE("BT controller start return = %d",ret); |
| if (ret != 0 ) { |
| ALOGE("BT controller start failed"); |
| a2dp.a2dp_source_started = false; |
| } else { |
| if(configure_a2dp_encoder_format() == true) { |
| a2dp.a2dp_source_started = true; |
| ret = 0; |
| ALOGD("Start playback successful to BT library"); |
| } else { |
| ALOGD(" unable to configure DSP encoder"); |
| a2dp.a2dp_source_started = false; |
| ret = -ETIMEDOUT; |
| } |
| } |
| } |
| |
| if (a2dp.a2dp_source_started) { |
| a2dp.a2dp_source_total_active_session_requests++; |
| a2dp_check_and_set_scrambler(); |
| a2dp_set_backend_cfg(SOURCE); |
| } |
| |
| ALOGD("start A2DP playback total active sessions :%d", |
| a2dp.a2dp_source_total_active_session_requests); |
| return ret; |
| } |
| |
| uint64_t audio_extn_a2dp_get_decoder_latency() |
| { |
| uint32_t latency = 0; |
| |
| switch(a2dp.bt_decoder_format) { |
| case CODEC_TYPE_SBC: |
| latency = DEFAULT_SINK_LATENCY_SBC; |
| break; |
| case CODEC_TYPE_AAC: |
| latency = DEFAULT_SINK_LATENCY_AAC; |
| break; |
| default: |
| latency = 200; |
| ALOGD("No valid decoder defined, setting latency to %dms", latency); |
| break; |
| } |
| return (uint64_t)latency; |
| } |
| |
| bool a2dp_send_sink_setup_complete(void) { |
| uint64_t system_latency = 0; |
| bool is_complete = false; |
| |
| system_latency = audio_extn_a2dp_get_decoder_latency(); |
| |
| if (a2dp.audio_sink_session_setup_complete(system_latency) == 0) { |
| is_complete = true; |
| } |
| return is_complete; |
| } |
| |
| int audio_extn_a2dp_start_capture() |
| { |
| int ret = 0; |
| |
| ALOGD("audio_extn_a2dp_start_capture start"); |
| |
| if(!(a2dp.bt_lib_sink_handle && a2dp.audio_sink_start |
| && a2dp.audio_get_dec_config)) { |
| ALOGE("a2dp handle is not identified, Ignoring start capture request"); |
| return -ENOSYS; |
| } |
| |
| if (!a2dp.a2dp_sink_started && !a2dp.a2dp_sink_total_active_session_requests) { |
| ALOGD("calling BT module stream start"); |
| /* This call indicates BT IPC lib to start capture */ |
| ret = a2dp.audio_sink_start(); |
| ALOGE("BT controller start capture return = %d",ret); |
| if (ret != 0 ) { |
| ALOGE("BT controller start capture failed"); |
| a2dp.a2dp_sink_started = false; |
| } else { |
| |
| if(!audio_extn_a2dp_sink_is_ready()) { |
| ALOGD("Wait for capture ready not successful"); |
| ret = -ETIMEDOUT; |
| } |
| |
| if(configure_a2dp_dsp_decoder_format() == true) { |
| a2dp.a2dp_sink_started = true; |
| ret = 0; |
| ALOGD("Start capture successful to BT library"); |
| } else { |
| ALOGD(" unable to configure DSP decoder"); |
| a2dp.a2dp_sink_started = false; |
| ret = -ETIMEDOUT; |
| } |
| |
| if (!a2dp_send_sink_setup_complete()) { |
| ALOGD("sink_setup_complete not successful"); |
| ret = -ETIMEDOUT; |
| } |
| } |
| } |
| |
| if (a2dp.a2dp_sink_started) { |
| if (a2dp_set_backend_cfg(SINK) == true) { |
| a2dp.a2dp_sink_total_active_session_requests++; |
| } |
| } |
| |
| ALOGD("start A2DP sink total active sessions :%d", |
| a2dp.a2dp_sink_total_active_session_requests); |
| return ret; |
| } |
| |
| static void reset_a2dp_enc_config_params() |
| { |
| int ret =0; |
| |
| struct mixer_ctl *ctl_enc_config, *ctrl_bit_format; |
| struct sbc_enc_cfg_t dummy_reset_config; |
| |
| memset(&dummy_reset_config, 0x0, sizeof(struct sbc_enc_cfg_t)); |
| ctl_enc_config = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_ENC_CONFIG_BLOCK); |
| if (!ctl_enc_config) { |
| ALOGE(" ERROR a2dp encoder format mixer control not identified"); |
| } else { |
| ret = mixer_ctl_set_array(ctl_enc_config, (void *)&dummy_reset_config, |
| sizeof(struct sbc_enc_cfg_t)); |
| a2dp.bt_encoder_format = MEDIA_FMT_NONE; |
| } |
| ctrl_bit_format = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_ENC_BIT_FORMAT); |
| if (!ctrl_bit_format) { |
| ALOGE(" ERROR bit format CONFIG data mixer control not identified"); |
| } else { |
| ret = mixer_ctl_set_enum_by_string(ctrl_bit_format, "S16_LE"); |
| if (ret != 0) { |
| ALOGE("%s: Failed to set bit format to encoder", __func__); |
| } |
| } |
| } |
| |
| static void reset_a2dp_dec_config_params() |
| { |
| int ret =0; |
| |
| struct mixer_ctl *ctl_dec_config, *ctrl_bit_format; |
| struct aac_dec_cfg_t dummy_reset_config; |
| |
| memset(&dummy_reset_config, 0x0, sizeof(struct aac_dec_cfg_t)); |
| ctl_dec_config = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_DEC_CONFIG_BLOCK); |
| if (!ctl_dec_config) { |
| ALOGE(" ERROR a2dp decoder format mixer control not identified"); |
| } else { |
| ret = mixer_ctl_set_array(ctl_dec_config, (void *)&dummy_reset_config, |
| sizeof(struct aac_dec_cfg_t)); |
| a2dp.bt_decoder_format = MEDIA_FMT_NONE; |
| } |
| ctrl_bit_format = mixer_get_ctl_by_name(a2dp.adev->mixer, |
| MIXER_DEC_BIT_FORMAT); |
| if (!ctrl_bit_format) { |
| ALOGE(" ERROR bit format CONFIG data mixer control not identified"); |
| } else { |
| ret = mixer_ctl_set_enum_by_string(ctrl_bit_format, "S16_LE"); |
| if (ret != 0) { |
| ALOGE("%s: Failed to set bit format to decoder", __func__); |
| } |
| } |
| } |
| |
| int audio_extn_a2dp_stop_playback() |
| { |
| int ret =0; |
| |
| ALOGV("audio_extn_a2dp_stop_playback start"); |
| if(!(a2dp.bt_lib_source_handle && a2dp.audio_source_stop)) { |
| ALOGE("a2dp handle is not identified, Ignoring stop request"); |
| return -ENOSYS; |
| } |
| |
| if (a2dp.a2dp_source_total_active_session_requests > 0) |
| a2dp.a2dp_source_total_active_session_requests--; |
| |
| if ( a2dp.a2dp_source_started && !a2dp.a2dp_source_total_active_session_requests) { |
| ALOGV("calling BT module stream stop"); |
| ret = a2dp.audio_source_stop(); |
| if (ret < 0) |
| ALOGE("stop stream to BT IPC lib failed"); |
| else |
| ALOGV("stop steam to BT IPC lib successful"); |
| reset_a2dp_enc_config_params(); |
| a2dp_reset_backend_cfg(SOURCE); |
| } |
| if(!a2dp.a2dp_source_total_active_session_requests) |
| a2dp.a2dp_source_started = false; |
| ALOGD("Stop A2DP playback, total active sessions :%d", |
| a2dp.a2dp_source_total_active_session_requests); |
| return 0; |
| } |
| |
| int audio_extn_a2dp_stop_capture() |
| { |
| int ret =0; |
| |
| ALOGV("audio_extn_a2dp_stop_capture start"); |
| if(!(a2dp.bt_lib_sink_handle && a2dp.audio_sink_stop)) { |
| ALOGE("a2dp handle is not identified, Ignoring stop request"); |
| return -ENOSYS; |
| } |
| |
| if (a2dp.a2dp_sink_total_active_session_requests > 0) |
| a2dp.a2dp_sink_total_active_session_requests--; |
| |
| if ( a2dp.a2dp_sink_started && !a2dp.a2dp_sink_total_active_session_requests) { |
| ALOGV("calling BT module stream stop"); |
| ret = a2dp.audio_sink_stop(); |
| if (ret < 0) |
| ALOGE("stop stream to BT IPC lib failed"); |
| else |
| ALOGV("stop steam to BT IPC lib successful"); |
| reset_a2dp_dec_config_params(); |
| a2dp_reset_backend_cfg(SINK); |
| } |
| if(!a2dp.a2dp_sink_total_active_session_requests) |
| a2dp.a2dp_source_started = false; |
| ALOGD("Stop A2DP capture, total active sessions :%d", |
| a2dp.a2dp_sink_total_active_session_requests); |
| return 0; |
| } |
| |
| void audio_extn_a2dp_set_parameters(struct str_parms *parms) |
| { |
| int ret, val; |
| char value[32]={0}; |
| struct audio_usecase *uc_info; |
| struct listnode *node; |
| |
| if(a2dp.is_a2dp_offload_supported == false) { |
| ALOGV("no supported codecs identified,ignoring a2dp setparam"); |
| return; |
| } |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_DEVICE_CONNECT, value, |
| sizeof(value)); |
| if (ret >= 0) { |
| val = atoi(value); |
| if (audio_is_a2dp_out_device(val)) { |
| ALOGV("Received device connect request for A2DP source"); |
| open_a2dp_source(); |
| } |
| goto param_handled; |
| } |
| |
| ret = str_parms_get_str(parms, AUDIO_PARAMETER_DEVICE_DISCONNECT, value, |
| sizeof(value)); |
| |
| if (ret >= 0) { |
| val = atoi(value); |
| if (audio_is_a2dp_out_device(val)) { |
| ALOGV("Received source device dis- connect request"); |
| close_a2dp_output(); |
| reset_a2dp_enc_config_params(); |
| a2dp_reset_backend_cfg(SOURCE); |
| } else if (audio_is_a2dp_in_device(val)) { |
| ALOGV("Received sink device dis- connect request"); |
| close_a2dp_input(); |
| reset_a2dp_dec_config_params(); |
| a2dp_reset_backend_cfg(SINK); |
| } |
| goto param_handled; |
| } |
| |
| ret = str_parms_get_str(parms, "A2dpSuspended", value, sizeof(value)); |
| if (ret >= 0) { |
| if (a2dp.bt_lib_source_handle && (a2dp.bt_state_source != A2DP_STATE_DISCONNECTED) ) { |
| if ((!strncmp(value,"true",sizeof(value)))) { |
| ALOGD("Setting a2dp to suspend state"); |
| a2dp.a2dp_source_suspended = true; |
| list_for_each(node, &a2dp.adev->usecase_list) { |
| uc_info = node_to_item(node, struct audio_usecase, list); |
| if (uc_info->type == PCM_PLAYBACK && |
| (uc_info->stream.out->devices & AUDIO_DEVICE_OUT_ALL_A2DP)) { |
| pthread_mutex_unlock(&a2dp.adev->lock); |
| check_a2dp_restore(a2dp.adev, uc_info->stream.out, false); |
| pthread_mutex_lock(&a2dp.adev->lock); |
| } |
| } |
| reset_a2dp_enc_config_params(); |
| if(a2dp.audio_source_suspend) |
| a2dp.audio_source_suspend(); |
| } else if (a2dp.a2dp_source_suspended == true) { |
| ALOGD("Resetting a2dp suspend state"); |
| struct audio_usecase *uc_info; |
| struct listnode *node; |
| if(a2dp.clear_source_a2dpsuspend_flag) |
| a2dp.clear_source_a2dpsuspend_flag(); |
| a2dp.a2dp_source_suspended = false; |
| /* |
| * It is possible that before suspend,a2dp sessions can be active |
| * for example during music + voice activation concurrency |
| * a2dp suspend will be called & BT will change to sco mode |
| * though music is paused as a part of voice activation |
| * compress session close happens only after pause timeout(10secs) |
| * so if resume request comes before pause timeout as a2dp session |
| * is already active IPC start will not be called from APM/audio_hw |
| * Fix is to call a2dp start for IPC library post suspend |
| * based on number of active session count |
| */ |
| if (a2dp.a2dp_source_total_active_session_requests > 0) { |
| ALOGD(" Calling IPC lib start post suspend state"); |
| if(a2dp.audio_source_start) { |
| ret = a2dp.audio_source_start(); |
| if (ret != 0) { |
| ALOGE("BT controller start failed"); |
| a2dp.a2dp_source_started = false; |
| } |
| } |
| } |
| list_for_each(node, &a2dp.adev->usecase_list) { |
| uc_info = node_to_item(node, struct audio_usecase, list); |
| if (uc_info->type == PCM_PLAYBACK && |
| (uc_info->stream.out->devices & AUDIO_DEVICE_OUT_ALL_A2DP)) { |
| pthread_mutex_unlock(&a2dp.adev->lock); |
| check_a2dp_restore(a2dp.adev, uc_info->stream.out, true); |
| pthread_mutex_lock(&a2dp.adev->lock); |
| } |
| } |
| } |
| } |
| goto param_handled; |
| } |
| param_handled: |
| ALOGV("end of a2dp setparam"); |
| } |
| |
| void audio_extn_a2dp_set_handoff_mode(bool is_on) |
| { |
| a2dp.is_handoff_in_progress = is_on; |
| } |
| |
| bool audio_extn_a2dp_is_force_device_switch() |
| { |
| //During encoder reconfiguration mode, force a2dp device switch |
| // Or if a2dp device is selected but earlier start failed ( as a2dp |
| // was suspended, force retry. |
| return a2dp.is_handoff_in_progress || !a2dp.a2dp_source_started; |
| } |
| |
| void audio_extn_a2dp_get_enc_sample_rate(int *sample_rate) |
| { |
| *sample_rate = a2dp.enc_sampling_rate; |
| } |
| |
| void audio_extn_a2dp_get_dec_sample_rate(int *sample_rate) |
| { |
| *sample_rate = a2dp.dec_sampling_rate; |
| } |
| |
| bool audio_extn_a2dp_source_is_ready() |
| { |
| bool ret = false; |
| |
| if (a2dp.a2dp_source_suspended) |
| return ret; |
| |
| if ((a2dp.bt_state_source != A2DP_STATE_DISCONNECTED) && |
| (a2dp.is_a2dp_offload_supported) && |
| (a2dp.audio_source_check_a2dp_ready)) |
| ret = a2dp.audio_source_check_a2dp_ready(); |
| return ret; |
| } |
| |
| bool audio_extn_a2dp_sink_is_ready() |
| { |
| bool ret = false; |
| |
| if ((a2dp.bt_state_sink != A2DP_STATE_DISCONNECTED) && |
| (a2dp.is_a2dp_offload_supported) && |
| (a2dp.audio_sink_check_a2dp_ready)) |
| ret = a2dp.audio_sink_check_a2dp_ready(); |
| return ret; |
| } |
| |
| bool audio_extn_a2dp_source_is_suspended() |
| { |
| return a2dp.a2dp_source_suspended; |
| } |
| |
| void audio_extn_a2dp_init (void *adev) |
| { |
| a2dp.adev = (struct audio_device*)adev; |
| a2dp.bt_lib_source_handle = NULL; |
| a2dp.a2dp_source_started = false; |
| a2dp.bt_state_source = A2DP_STATE_DISCONNECTED; |
| a2dp.a2dp_source_total_active_session_requests = 0; |
| a2dp.a2dp_source_suspended = false; |
| a2dp.bt_encoder_format = CODEC_TYPE_INVALID; |
| a2dp.enc_sampling_rate = 48000; |
| a2dp.is_handoff_in_progress = false; |
| a2dp.is_aptx_dual_mono_supported = false; |
| reset_a2dp_enc_config_params(); |
| |
| a2dp.bt_lib_sink_handle = NULL; |
| a2dp.a2dp_sink_started = false; |
| a2dp.bt_state_sink = A2DP_STATE_DISCONNECTED; |
| a2dp.a2dp_sink_total_active_session_requests = 0; |
| open_a2dp_sink(); |
| |
| a2dp.is_a2dp_offload_supported = false; |
| update_offload_codec_capabilities(); |
| } |
| |
| uint32_t audio_extn_a2dp_get_encoder_latency() |
| { |
| uint32_t latency = 0; |
| int avsync_runtime_prop = 0; |
| int sbc_offset = 0, aptx_offset = 0, aptxhd_offset = 0, |
| aac_offset = 0, celt_offset = 0, ldac_offset = 0; |
| char value[PROPERTY_VALUE_MAX]; |
| |
| memset(value, '\0', sizeof(char)*PROPERTY_VALUE_MAX); |
| avsync_runtime_prop = property_get("vendor.audio.a2dp.codec.latency", value, NULL); |
| if (avsync_runtime_prop > 0) { |
| if (sscanf(value, "%d/%d/%d/%d/%d%d", |
| &sbc_offset, &aptx_offset, &aptxhd_offset, &aac_offset, &celt_offset, &ldac_offset) != 6) { |
| ALOGI("Failed to parse avsync offset params from '%s'.", value); |
| avsync_runtime_prop = 0; |
| } |
| } |
| |
| uint32_t slatency = 0; |
| if (a2dp.audio_sink_get_a2dp_latency && a2dp.bt_state_source != A2DP_STATE_DISCONNECTED) { |
| slatency = a2dp.audio_sink_get_a2dp_latency(); |
| } |
| |
| switch(a2dp.bt_encoder_format) { |
| case CODEC_TYPE_SBC: |
| latency = (avsync_runtime_prop > 0) ? sbc_offset : ENCODER_LATENCY_SBC; |
| latency += (slatency <= 0) ? DEFAULT_SINK_LATENCY_SBC : slatency; |
| break; |
| case CODEC_TYPE_APTX: |
| latency = (avsync_runtime_prop > 0) ? aptx_offset : ENCODER_LATENCY_APTX; |
| latency += (slatency <= 0) ? DEFAULT_SINK_LATENCY_APTX : slatency; |
| break; |
| case CODEC_TYPE_APTX_HD: |
| latency = (avsync_runtime_prop > 0) ? aptxhd_offset : ENCODER_LATENCY_APTX_HD; |
| latency += (slatency <= 0) ? DEFAULT_SINK_LATENCY_APTX_HD : slatency; |
| break; |
| case CODEC_TYPE_AAC: |
| latency = (avsync_runtime_prop > 0) ? aac_offset : ENCODER_LATENCY_AAC; |
| latency += (slatency <= 0) ? DEFAULT_SINK_LATENCY_AAC : slatency; |
| break; |
| case CODEC_TYPE_CELT: |
| latency = (avsync_runtime_prop > 0) ? celt_offset : ENCODER_LATENCY_CELT; |
| latency += (slatency <= 0) ? DEFAULT_SINK_LATENCY_CELT : slatency; |
| break; |
| case CODEC_TYPE_LDAC: |
| latency = (avsync_runtime_prop > 0) ? ldac_offset : ENCODER_LATENCY_LDAC; |
| latency += (slatency <= 0) ? DEFAULT_SINK_LATENCY_LDAC : slatency; |
| break; |
| default: |
| latency = 200; |
| break; |
| } |
| return latency; |
| } |
| #endif // SPLIT_A2DP_ENABLED |