| /* |
| * Copyright (c) 2013, 2016, The Linux Foundation. All rights reserved. |
| * Not a Contribution. |
| * |
| * Copyright (C) 2013 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "audio_hw_usb" |
| #define LOG_NDEBUG 0 |
| #define LOG_NDDEBUG 0 |
| |
| #include <errno.h> |
| #include <pthread.h> |
| #include <stdlib.h> |
| #include <cutils/log.h> |
| #include <cutils/str_parms.h> |
| #include <sys/ioctl.h> |
| #include <fcntl.h> |
| #include <sys/stat.h> |
| #include <system/audio.h> |
| #include <tinyalsa/asoundlib.h> |
| #include <audio_hw.h> |
| #include <cutils/properties.h> |
| #include <ctype.h> |
| #include <math.h> |
| |
| #ifdef USB_HEADSET_ENABLED |
| #define USB_BUFF_SIZE 2048 |
| #define CHANNEL_NUMBER_STR "Channels: " |
| #define PLAYBACK_PROFILE_STR "Playback:" |
| #define CAPTURE_PROFILE_STR "Capture:" |
| #define USB_SIDETONE_GAIN_STR "usb_sidetone_gain" |
| #define ABS_SUB(A, B) (((A) > (B)) ? ((A) - (B)):((B) - (A))) |
| #define SAMPLE_RATE_8000 8000 |
| #define SAMPLE_RATE_11025 11025 |
| // Supported sample rates for USB |
| static uint32_t supported_sample_rates[] = |
| {44100, 48000, 64000, 88200, 96000, 176400, 192000}; |
| |
| #define MAX_SAMPLE_RATE_SIZE sizeof(supported_sample_rates)/sizeof(supported_sample_rates[0]) |
| |
| enum usb_usecase_type{ |
| USB_PLAYBACK = 0, |
| USB_CAPTURE, |
| }; |
| |
| enum { |
| USB_SIDETONE_ENABLE_INDEX = 0, |
| USB_SIDETONE_VOLUME_INDEX, |
| USB_SIDETONE_MAX_INDEX, |
| }; |
| |
| struct usb_device_config { |
| struct listnode list; |
| unsigned int bit_width; |
| unsigned int channels; |
| unsigned int rate_size; |
| unsigned int rates[MAX_SAMPLE_RATE_SIZE]; |
| }; |
| |
| struct usb_card_config { |
| struct listnode list; |
| audio_devices_t usb_device_type; |
| int usb_card; |
| struct listnode usb_device_conf_list; |
| struct mixer *usb_snd_mixer; |
| int usb_sidetone_index[USB_SIDETONE_MAX_INDEX]; |
| int usb_sidetone_vol_min; |
| int usb_sidetone_vol_max; |
| }; |
| |
| struct usb_module { |
| struct listnode usb_card_conf_list; |
| struct audio_device *adev; |
| int sidetone_gain; |
| }; |
| |
| static struct usb_module *usbmod = NULL; |
| static bool usb_audio_debug_enable = false; |
| static int usb_sidetone_gain = 0; |
| |
| static const char * const usb_sidetone_enable_str[] = { |
| "Sidetone Playback Switch", |
| "Mic Playback Switchs", |
| }; |
| |
| static const char * const usb_sidetone_volume_str[] = { |
| "Sidetone Playback Volume", |
| "Mic Playback Volume", |
| }; |
| |
| static void usb_mixer_print_enum(struct mixer_ctl *ctl) |
| { |
| unsigned int num_enums; |
| unsigned int i; |
| const char *string; |
| |
| num_enums = mixer_ctl_get_num_enums(ctl); |
| |
| for (i = 0; i < num_enums; i++) { |
| string = mixer_ctl_get_enum_string(ctl, i); |
| ALOGI("\t%s%s", mixer_ctl_get_value(ctl, 0) == (int)i ? ">" : "", string); |
| } |
| } |
| |
| static void usb_soundcard_detail_control(struct mixer *mixer, const char *control) |
| { |
| struct mixer_ctl *ctl; |
| enum mixer_ctl_type type; |
| unsigned int num_values; |
| unsigned int i; |
| int min, max; |
| |
| if (isdigit(control[0])) |
| ctl = mixer_get_ctl(mixer, atoi(control)); |
| else |
| ctl = mixer_get_ctl_by_name(mixer, control); |
| |
| if (!ctl) { |
| fprintf(stderr, "Invalid mixer control\n"); |
| return; |
| } |
| |
| type = mixer_ctl_get_type(ctl); |
| num_values = mixer_ctl_get_num_values(ctl); |
| |
| ALOGI("%s:", mixer_ctl_get_name(ctl)); |
| |
| for (i = 0; i < num_values; i++) { |
| switch (type) { |
| case MIXER_CTL_TYPE_INT: |
| ALOGI(" %d", mixer_ctl_get_value(ctl, i)); |
| break; |
| case MIXER_CTL_TYPE_BOOL: |
| ALOGI(" %s", mixer_ctl_get_value(ctl, i) ? "On" : "Off"); |
| break; |
| case MIXER_CTL_TYPE_ENUM: |
| usb_mixer_print_enum(ctl); |
| break; |
| case MIXER_CTL_TYPE_BYTE: |
| ALOGI(" 0x%02x", mixer_ctl_get_value(ctl, i)); |
| break; |
| default: |
| ALOGI(" unknown"); |
| break; |
| } |
| } |
| |
| if (type == MIXER_CTL_TYPE_INT) { |
| min = mixer_ctl_get_range_min(ctl); |
| max = mixer_ctl_get_range_max(ctl); |
| ALOGI(" (range %d->%d)", min, max); |
| } |
| } |
| |
| static void usb_soundcard_list_controls(struct mixer *mixer) |
| { |
| struct mixer_ctl *ctl; |
| const char *name, *type; |
| unsigned int num_ctls, num_values; |
| unsigned int i; |
| |
| num_ctls = mixer_get_num_ctls(mixer); |
| |
| ALOGI("Number of controls: %d\n", num_ctls); |
| |
| ALOGI("ctl\ttype\tnum\t%-40s value\n", "name"); |
| for (i = 0; i < num_ctls; i++) { |
| ctl = mixer_get_ctl(mixer, i); |
| if (ctl != NULL) { |
| name = mixer_ctl_get_name(ctl); |
| type = mixer_ctl_get_type_string(ctl); |
| num_values = mixer_ctl_get_num_values(ctl); |
| ALOGI("%d\t%s\t%d\t%-40s", i, type, num_values, name); |
| if (name != NULL) |
| usb_soundcard_detail_control(mixer, name); |
| } |
| } |
| } |
| |
| static int usb_set_channel_mixer_ctl(int channel, |
| char *ch_mixer_ctl_name) |
| { |
| struct mixer_ctl *ctl; |
| |
| ctl = mixer_get_ctl_by_name(usbmod->adev->mixer, ch_mixer_ctl_name); |
| if (!ctl) { |
| ALOGE("%s: Could not get ctl for mixer cmd - %s", |
| __func__, ch_mixer_ctl_name); |
| return -EINVAL; |
| } |
| switch (channel) { |
| case 1: |
| mixer_ctl_set_enum_by_string(ctl, "One"); |
| break; |
| case 2: |
| mixer_ctl_set_enum_by_string(ctl, "Two"); |
| break; |
| default: |
| ALOGV("%s: channel(%d) not supported, set as default 2 channels", |
| __func__, channel); |
| mixer_ctl_set_enum_by_string(ctl, "Two"); |
| break; |
| } |
| return 0; |
| } |
| |
| static int usb_set_dev_id_mixer_ctl(unsigned int usb_usecase_type, int card, |
| char *dev_mixer_ctl_name) |
| { |
| struct mixer_ctl *ctl; |
| unsigned int dev_token; |
| unsigned int pcm_device_number = 0; |
| |
| /* |
| * usb_dev_token_id is 32 bit number and is defined as below: |
| * usb_sound_card_idx(31:16) | usb PCM device ID(15:8) | usb_usecase_type(7:0) |
| */ |
| dev_token = (card << 16 ) | |
| (pcm_device_number << 8) | (usb_usecase_type & 0xFF); |
| |
| ctl = mixer_get_ctl_by_name(usbmod->adev->mixer, dev_mixer_ctl_name); |
| if (!ctl) { |
| ALOGE("%s: Could not get ctl for mixer cmd - %s", |
| __func__, dev_mixer_ctl_name); |
| return -EINVAL; |
| } |
| mixer_ctl_set_value(ctl, 0, dev_token); |
| |
| return 0; |
| } |
| |
| static int usb_get_sample_rates(char *rates_str, |
| struct usb_device_config *config) |
| { |
| uint32_t i; |
| char *next_sr_string, *temp_ptr; |
| uint32_t sr, min_sr, max_sr, sr_size = 0; |
| |
| /* Sample rate string can be in any of the folloing two bit_widthes: |
| * Rates: 8000 - 48000 (continuous) |
| * Rates: 8000, 44100, 48000 |
| * Support both the bit_widths |
| */ |
| ALOGV("%s: rates_str %s", __func__, rates_str); |
| next_sr_string = strtok_r(rates_str, "Rates: ", &temp_ptr); |
| if (next_sr_string == NULL) { |
| ALOGE("%s: could not find min rates string", __func__); |
| return -EINVAL; |
| } |
| if (strstr(rates_str, "continuous") != NULL) { |
| min_sr = (uint32_t)atoi(next_sr_string); |
| next_sr_string = strtok_r(NULL, " ,.-", &temp_ptr); |
| if (next_sr_string == NULL) { |
| ALOGE("%s: could not find max rates string", __func__); |
| return -EINVAL; |
| } |
| max_sr = (uint32_t)atoi(next_sr_string); |
| |
| for (i = 0; i < MAX_SAMPLE_RATE_SIZE; i++) { |
| if (supported_sample_rates[i] >= min_sr && |
| supported_sample_rates[i] <= max_sr) { |
| config->rates[sr_size++] = supported_sample_rates[i]; |
| ALOGI_IF(usb_audio_debug_enable, |
| "%s: continuous sample rate supported_sample_rates[%d] %d", |
| __func__, i, supported_sample_rates[i]); |
| } |
| } |
| } else { |
| do { |
| sr = (uint32_t)atoi(next_sr_string); |
| for (i = 0; i < MAX_SAMPLE_RATE_SIZE; i++) { |
| if (supported_sample_rates[i] == sr) { |
| ALOGI_IF(usb_audio_debug_enable, |
| "%s: sr %d, supported_sample_rates[%d] %d -> matches!!", |
| __func__, sr, i, supported_sample_rates[i]); |
| config->rates[sr_size++] = supported_sample_rates[i]; |
| } |
| } |
| next_sr_string = strtok_r(NULL, " ,.-", &temp_ptr); |
| } while (next_sr_string != NULL); |
| } |
| config->rate_size = sr_size; |
| return 0; |
| } |
| |
| static int usb_get_capability(int type, |
| struct usb_card_config *usb_card_info, |
| int card) |
| { |
| int32_t err = 1; |
| int32_t size = 0; |
| int32_t fd=-1; |
| int32_t altset_index = 1; |
| int32_t channels_no; |
| char *str_start, *channel_start, *bit_width_start, *rates_str_start, |
| *target; |
| char *read_buf = NULL; |
| char *rates_str = NULL; |
| char path[128], altset[9]; |
| int ret = 0; |
| char *bit_width_str = NULL; |
| struct usb_device_config * usb_device_info; |
| |
| ALOGV("%s: for %s", __func__, (type == USB_PLAYBACK) ? |
| PLAYBACK_PROFILE_STR : CAPTURE_PROFILE_STR); |
| |
| snprintf(path, sizeof(path), "/proc/asound/card%u/stream0", |
| card); |
| |
| fd = open(path, O_RDONLY); |
| if (fd <0) { |
| ALOGE("%s: error failed to open config file %s error: %d\n", |
| __func__, path, errno); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| read_buf = (char *)calloc(1, USB_BUFF_SIZE + 1); |
| |
| if (!read_buf) { |
| ALOGE("Failed to create read_buf"); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| err = read(fd, read_buf, USB_BUFF_SIZE); |
| str_start = strstr(read_buf, ((type == USB_PLAYBACK) ? |
| PLAYBACK_PROFILE_STR : CAPTURE_PROFILE_STR)); |
| if (str_start == NULL) { |
| ALOGE("%s: error %s section not found in usb config file", |
| __func__, ((type == USB_PLAYBACK) ? |
| PLAYBACK_PROFILE_STR : CAPTURE_PROFILE_STR)); |
| ret = -EINVAL; |
| goto done; |
| } |
| ALOGV("%s: usb_config = %s\n", __func__, str_start); |
| |
| while (str_start != NULL) { |
| sprintf(altset, "Altset %d", altset_index); |
| ALOGV("%s: altset_index %d\n", __func__, altset_index); |
| str_start = strstr(str_start, altset); |
| if (str_start == NULL) { |
| if (altset_index == 1) { |
| ALOGE("%s: error %s section not found in usb config file", |
| __func__, (type == USB_PLAYBACK) ? |
| PLAYBACK_PROFILE_STR : CAPTURE_PROFILE_STR); |
| ret = -EINVAL; |
| } |
| break; |
| } |
| usb_device_info = calloc(1, sizeof(struct usb_device_config)); |
| if (usb_device_info == NULL) { |
| ALOGE("%s: error unable to allocate memory", |
| __func__); |
| ret = -ENOMEM; |
| break; |
| } |
| altset_index++; |
| /* Bit bit_width parsing */ |
| bit_width_start = strstr(str_start, "Format: "); |
| if (bit_width_start == NULL) { |
| ALOGI("%s: Could not find bit_width string", __func__); |
| free(usb_device_info); |
| continue; |
| } |
| target = strchr(bit_width_start, '\n'); |
| if (target == NULL) { |
| ALOGI("%s:end of line not found", __func__); |
| free(usb_device_info); |
| continue; |
| } |
| size = target - bit_width_start; |
| if ((bit_width_str = (char *)malloc(size + 1)) == NULL) { |
| ALOGE("%s: unable to allocate memory to hold bit width strings", |
| __func__); |
| ret = -EINVAL; |
| free(usb_device_info); |
| break; |
| } |
| memcpy(bit_width_str, bit_width_start, size); |
| bit_width_str[size] = '\0'; |
| if (strstr(bit_width_str, "S16_LE")) |
| usb_device_info->bit_width = 16; |
| else if (strstr(bit_width_str, "S24_LE")) |
| usb_device_info->bit_width = 24; |
| else if (strstr(bit_width_str, "S24_3LE")) |
| usb_device_info->bit_width = 24; |
| else if (strstr(bit_width_str, "S32_LE")) |
| usb_device_info->bit_width = 32; |
| |
| if (bit_width_str) |
| free(bit_width_str); |
| |
| /* channels parsing */ |
| channel_start = strstr(str_start, CHANNEL_NUMBER_STR); |
| if (channel_start == NULL) { |
| ALOGI("%s: could not find Channels string", __func__); |
| free(usb_device_info); |
| continue; |
| } |
| channels_no = atoi(channel_start + strlen(CHANNEL_NUMBER_STR)); |
| usb_device_info->channels = channels_no; |
| |
| /* Sample rates parsing */ |
| rates_str_start = strstr(str_start, "Rates: "); |
| if (rates_str_start == NULL) { |
| ALOGI("%s: cant find rates string", __func__); |
| free(usb_device_info); |
| continue; |
| } |
| target = strchr(rates_str_start, '\n'); |
| if (target == NULL) { |
| ALOGI("%s: end of line not found", __func__); |
| free(usb_device_info); |
| continue; |
| } |
| size = target - rates_str_start; |
| if ((rates_str = (char *)malloc(size + 1)) == NULL) { |
| ALOGE("%s: unable to allocate memory to hold sample rate strings", |
| __func__); |
| ret = -EINVAL; |
| free(usb_device_info); |
| break; |
| } |
| memcpy(rates_str, rates_str_start, size); |
| rates_str[size] = '\0'; |
| ret = usb_get_sample_rates(rates_str, usb_device_info); |
| if (rates_str) |
| free(rates_str); |
| if (ret < 0) { |
| ALOGI("%s: error unable to get sample rate values", |
| __func__); |
| free(usb_device_info); |
| continue; |
| } |
| /* Add to list if every field is valid */ |
| list_add_tail(&usb_card_info->usb_device_conf_list, |
| &usb_device_info->list); |
| } |
| |
| done: |
| if (fd >= 0) close(fd); |
| if (read_buf) free(read_buf); |
| return ret; |
| } |
| |
| static int usb_get_device_pb_config(struct usb_card_config *usb_card_info, |
| int card) |
| { |
| int ret; |
| struct listnode *node_d; |
| struct usb_device_config *dev_info; |
| |
| /* get capabilities */ |
| if ((ret = usb_get_capability(USB_PLAYBACK, usb_card_info, card))) { |
| ALOGE("%s: could not get Playback capabilities from usb device", |
| __func__); |
| goto exit; |
| } |
| /* Currently only use the first profile using to configure channel for simplification */ |
| list_for_each(node_d, &usb_card_info->usb_device_conf_list) { |
| dev_info = node_to_item(node_d, struct usb_device_config, list); |
| if (dev_info != NULL) { |
| usb_set_channel_mixer_ctl(dev_info->channels, "USB_AUDIO_RX Channels"); |
| break; |
| } |
| } |
| usb_set_dev_id_mixer_ctl(USB_PLAYBACK, card, "USB_AUDIO_RX dev_token"); |
| |
| exit: |
| |
| return ret; |
| } |
| |
| static int usb_get_device_cap_config(struct usb_card_config *usb_card_info, |
| int card) |
| { |
| int ret; |
| struct listnode *node_d; |
| struct usb_device_config *dev_info; |
| |
| /* get capabilities */ |
| if ((ret = usb_get_capability(USB_CAPTURE, usb_card_info, card))) { |
| ALOGE("%s: could not get Playback capabilities from usb device", |
| __func__); |
| goto exit; |
| } |
| /* Currently only use the first profile using to configure channel for simplification */ |
| list_for_each(node_d, &usb_card_info->usb_device_conf_list) { |
| dev_info = node_to_item(node_d, struct usb_device_config, list); |
| if (dev_info != NULL) { |
| usb_set_channel_mixer_ctl(dev_info->channels, "USB_AUDIO_TX Channels"); |
| break; |
| } |
| } |
| usb_set_dev_id_mixer_ctl(USB_CAPTURE, card, "USB_AUDIO_TX dev_token"); |
| |
| exit: |
| return ret; |
| } |
| |
| static void usb_get_sidetone_mixer(struct usb_card_config *usb_card_info) |
| { |
| struct mixer_ctl *ctl; |
| unsigned int index; |
| |
| for (index = 0; index < USB_SIDETONE_MAX_INDEX; index++) |
| usb_card_info->usb_sidetone_index[index] = -1; |
| |
| usb_card_info->usb_snd_mixer = mixer_open(usb_card_info->usb_card); |
| for (index = 0; |
| index < sizeof(usb_sidetone_enable_str)/sizeof(usb_sidetone_enable_str[0]); |
| index++) { |
| ctl = mixer_get_ctl_by_name(usb_card_info->usb_snd_mixer, |
| usb_sidetone_enable_str[index]); |
| if (ctl) { |
| usb_card_info->usb_sidetone_index[USB_SIDETONE_ENABLE_INDEX] = index; |
| /* Disable device sidetone by default */ |
| mixer_ctl_set_value(ctl, 0, false); |
| break; |
| } |
| } |
| for (index = 0; |
| index < sizeof(usb_sidetone_volume_str)/sizeof(usb_sidetone_volume_str[0]); |
| index++) { |
| ctl = mixer_get_ctl_by_name(usb_card_info->usb_snd_mixer, |
| usb_sidetone_volume_str[index]); |
| if (ctl) { |
| usb_card_info->usb_sidetone_index[USB_SIDETONE_VOLUME_INDEX] = index; |
| usb_card_info->usb_sidetone_vol_min = mixer_ctl_get_range_min(ctl); |
| usb_card_info->usb_sidetone_vol_max = mixer_ctl_get_range_max(ctl); |
| break; |
| } |
| } |
| |
| if ((usb_card_info->usb_snd_mixer != NULL) && (usb_audio_debug_enable)) |
| usb_soundcard_list_controls(usb_card_info->usb_snd_mixer); |
| |
| return; |
| } |
| |
| static bool usb_valid_device(int device) |
| { |
| bool is_usb_device = false; |
| if ((device & AUDIO_DEVICE_OUT_USB_DEVICE) || |
| (device & AUDIO_DEVICE_IN_USB_DEVICE)) |
| is_usb_device = true; |
| return is_usb_device; |
| } |
| |
| static void usb_print_active_device(void){ |
| struct listnode *node_i, *node_j; |
| struct usb_device_config *dev_info; |
| struct usb_card_config *card_info; |
| unsigned int i; |
| |
| ALOGI("%s", __func__); |
| list_for_each(node_i, &usbmod->usb_card_conf_list) { |
| card_info = node_to_item(node_i, struct usb_card_config, list); |
| ALOGI("%s: card_dev_type (0x%x), card_no(%d)", |
| __func__, card_info->usb_device_type, card_info->usb_card); |
| list_for_each(node_j, &card_info->usb_device_conf_list) { |
| dev_info = node_to_item(node_j, struct usb_device_config, list); |
| ALOGI("%s: bit-width(%d) channel(%d)", |
| __func__, dev_info->bit_width, dev_info->channels); |
| for (i = 0; i < dev_info->rate_size; i++) |
| ALOGI("%s: rate %d", __func__, dev_info->rates[i]); |
| } |
| } |
| } |
| |
| static bool usb_get_best_match_for_bit_width( |
| struct listnode *dev_list, |
| unsigned int stream_bit_width, |
| unsigned int *bit_width) |
| { |
| struct listnode *node_i; |
| struct usb_device_config *dev_info; |
| unsigned int candidate = 0; |
| |
| list_for_each(node_i, dev_list) { |
| dev_info = node_to_item(node_i, struct usb_device_config, list); |
| ALOGI_IF(usb_audio_debug_enable, |
| "%s: USB bw(%d), stream bw(%d), candidate(%d)", |
| __func__, dev_info->bit_width, |
| stream_bit_width, candidate); |
| if (dev_info->bit_width == stream_bit_width) { |
| *bit_width = dev_info->bit_width; |
| ALOGV("%s: Found match bit-width (%d)", |
| __func__, dev_info->bit_width); |
| goto exit; |
| } else if (candidate == 0) { |
| candidate = dev_info->bit_width; |
| } |
| /* |
| * If stream bit is 24, USB supports both 16 bit and 32 bit, then |
| * higher bit width 32 is picked up instead of 16-bit |
| */ |
| else if (ABS_SUB(stream_bit_width, dev_info->bit_width) < |
| ABS_SUB(stream_bit_width, candidate)) { |
| candidate = dev_info->bit_width; |
| } |
| else if ((ABS_SUB(stream_bit_width, dev_info->bit_width) == |
| ABS_SUB(stream_bit_width, candidate)) && |
| (dev_info->bit_width > candidate)) { |
| candidate = dev_info->bit_width; |
| } |
| } |
| ALOGV("%s: No match found, use the best candidate bw(%d)", |
| __func__, candidate); |
| *bit_width = candidate; |
| exit: |
| return true; |
| } |
| |
| static bool usb_get_best_match_for_channels( |
| struct listnode *dev_list, |
| unsigned int bit_width, |
| unsigned int stream_ch, |
| unsigned int *ch) |
| { |
| struct listnode *node_i; |
| struct usb_device_config *dev_info; |
| unsigned int candidate = 0; |
| |
| list_for_each(node_i, dev_list) { |
| dev_info = node_to_item(node_i, struct usb_device_config, list); |
| ALOGI_IF(usb_audio_debug_enable, |
| "%s: USB ch(%d)bw(%d), stream ch(%d)bw(%d), candidate(%d)", |
| __func__, dev_info->channels, dev_info->bit_width, |
| stream_ch, bit_width, candidate); |
| if (dev_info->bit_width != bit_width) |
| continue; |
| if (dev_info->channels== stream_ch) { |
| *ch = dev_info->channels; |
| ALOGV("%s: Found match channels (%d)", |
| __func__, dev_info->channels); |
| goto exit; |
| } else if (candidate == 0) |
| candidate = dev_info->channels; |
| /* |
| * If stream channel is 4, USB supports both 3 and 5, then |
| * higher channel 5 is picked up instead of 3 |
| */ |
| else if (ABS_SUB(stream_ch, dev_info->channels) < |
| ABS_SUB(stream_ch, candidate)) { |
| candidate = dev_info->channels; |
| } else if ((ABS_SUB(stream_ch, dev_info->channels) == |
| ABS_SUB(stream_ch, candidate)) && |
| (dev_info->channels > candidate)) { |
| candidate = dev_info->channels; |
| } |
| } |
| ALOGV("%s: No match found, use the best candidate ch(%d)", |
| __func__, candidate); |
| *ch = candidate; |
| exit: |
| return true; |
| |
| } |
| |
| static bool usb_sample_rate_multiple( |
| unsigned int stream_sample_rate, |
| unsigned int base) |
| { |
| return (((stream_sample_rate / base) * base) == stream_sample_rate); |
| } |
| |
| static bool usb_find_sample_rate_candidate(unsigned int base, |
| unsigned stream_rate, |
| unsigned int usb_rate, |
| unsigned int cur_candidate, |
| unsigned int *update_candidate) |
| { |
| /* For sample rate, we should consider fracational sample rate as high priority. |
| * For example, if the stream is 88.2kHz and USB device support both 44.1kH and |
| * 48kHz sample rate, we should pick 44.1kHz instead of 48kHz |
| */ |
| if (!usb_sample_rate_multiple(cur_candidate, base) && |
| usb_sample_rate_multiple(usb_rate, base)) { |
| *update_candidate = usb_rate; |
| } else if (usb_sample_rate_multiple(cur_candidate, base) && |
| usb_sample_rate_multiple(usb_rate, base)) { |
| if (ABS_SUB(stream_rate, usb_rate) < |
| ABS_SUB(stream_rate, cur_candidate)) { |
| *update_candidate = usb_rate; |
| } else if ((ABS_SUB(stream_rate, usb_rate) == |
| ABS_SUB(stream_rate, cur_candidate)) && |
| (usb_rate > cur_candidate)) { |
| *update_candidate = usb_rate; |
| } |
| } else if (!usb_sample_rate_multiple(cur_candidate, base) && |
| !usb_sample_rate_multiple(usb_rate, base)) { |
| if (ABS_SUB(stream_rate, usb_rate) < |
| ABS_SUB(stream_rate, cur_candidate)) { |
| *update_candidate = usb_rate; |
| } else if ((ABS_SUB(stream_rate, usb_rate) == |
| ABS_SUB(stream_rate, cur_candidate)) && |
| (usb_rate > cur_candidate)) { |
| *update_candidate = usb_rate; |
| } |
| } |
| return true; |
| } |
| |
| static bool usb_get_best_match_for_sample_rate( |
| struct listnode *dev_list, |
| unsigned int bit_width, |
| unsigned int ch, |
| unsigned int stream_sample_rate, |
| unsigned int *sr) |
| { |
| struct listnode *node_i; |
| struct usb_device_config *dev_info; |
| unsigned int candidate = 48000; |
| unsigned int base = SAMPLE_RATE_8000; |
| bool multiple_8k = usb_sample_rate_multiple(stream_sample_rate, base); |
| unsigned int i; |
| |
| ALOGV("%s: stm ch(%d)bw(%d)sr(%d), stream sample multiple of 8kHz(%d)", |
| __func__, ch, bit_width, stream_sample_rate, multiple_8k); |
| |
| list_for_each(node_i, dev_list) { |
| dev_info = node_to_item(node_i, struct usb_device_config, list); |
| ALOGI_IF(usb_audio_debug_enable, |
| "%s: USB ch(%d)bw(%d), stm ch(%d)bw(%d)sr(%d), candidate(%d)", |
| __func__, dev_info->channels, dev_info->bit_width, |
| ch, bit_width, stream_sample_rate, candidate); |
| if ((dev_info->bit_width != bit_width) && dev_info->channels != ch) |
| continue; |
| |
| candidate = 0; |
| for (i = 0; i < dev_info->rate_size; i++) { |
| ALOGI_IF(usb_audio_debug_enable, |
| "%s: USB ch(%d)bw(%d)sr(%d), stm ch(%d)bw(%d)sr(%d), candidate(%d)", |
| __func__, dev_info->channels, |
| dev_info->bit_width, dev_info->rates[i], |
| ch, bit_width, stream_sample_rate, candidate); |
| if (stream_sample_rate == dev_info->rates[i]) { |
| *sr = dev_info->rates[i]; |
| ALOGV("%s: Found match sample rate (%d)", |
| __func__, dev_info->rates[i]); |
| goto exit; |
| } else if (candidate == 0) { |
| candidate = dev_info->rates[i]; |
| /* |
| * For sample rate, we should consider fracational sample rate as high priority. |
| * For example, if the stream is 88.2kHz and USB device support both 44.1kH and |
| * 48kHz sample rate, we should pick 44.1kHz instead of 48kHz |
| */ |
| } else if (multiple_8k) { |
| usb_find_sample_rate_candidate(SAMPLE_RATE_8000, |
| stream_sample_rate, |
| dev_info->rates[i], |
| candidate, |
| &candidate); |
| } else { |
| usb_find_sample_rate_candidate(SAMPLE_RATE_11025, |
| stream_sample_rate, |
| dev_info->rates[i], |
| candidate, |
| &candidate); |
| } |
| } |
| } |
| ALOGV("%s: No match found, use the best candidate sr(%d)", |
| __func__, candidate); |
| *sr = candidate; |
| exit: |
| return true; |
| } |
| |
| static bool usb_audio_backend_apply_policy(struct listnode *dev_list, |
| unsigned int *bit_width, |
| unsigned int *sample_rate, |
| unsigned int ch) |
| { |
| unsigned int channel; |
| bool is_usb_supported = true; |
| |
| ALOGV("%s: from stream: bit-width(%d) sample_rate(%d) channels (%d)", |
| __func__, *bit_width, *sample_rate, ch); |
| if (list_empty(dev_list)) { |
| *sample_rate = 48000; |
| *bit_width = 16; |
| channel = 2; |
| ALOGI("%s: list is empty,fall back to default setting", __func__); |
| goto exit; |
| } |
| usb_get_best_match_for_bit_width(dev_list, *bit_width, bit_width); |
| usb_get_best_match_for_channels(dev_list, |
| *bit_width, |
| ch, |
| &channel); |
| usb_get_best_match_for_sample_rate(dev_list, |
| *bit_width, |
| channel, |
| *sample_rate, |
| sample_rate); |
| exit: |
| ALOGV("%s: Updated sample rate per profile: bit-width(%d) rate(%d) chs(%d)", |
| __func__, *bit_width, *sample_rate, channel); |
| usb_set_channel_mixer_ctl(channel, "USB_AUDIO_RX Channels"); |
| return is_usb_supported; |
| } |
| |
| static int usb_get_sidetone_gain(struct usb_card_config *card_info) |
| { |
| int gain = card_info->usb_sidetone_vol_min + usbmod->sidetone_gain; |
| if (gain > card_info->usb_sidetone_vol_max) |
| gain = card_info->usb_sidetone_vol_max; |
| return gain; |
| } |
| |
| void audio_extn_usb_set_sidetone_gain(struct str_parms *parms, |
| char *value, int len) |
| { |
| int err; |
| |
| err = str_parms_get_str(parms, USB_SIDETONE_GAIN_STR, |
| value, len); |
| if (err >= 0) { |
| usb_sidetone_gain = pow(10.0, (float)(atoi(value))/10.0); |
| ALOGV("%s: sidetone gain(%s) decimal %d", |
| __func__, value, usb_sidetone_gain); |
| str_parms_del(parms, USB_SIDETONE_GAIN_STR); |
| } |
| return; |
| } |
| |
| int audio_extn_usb_enable_sidetone(int device, bool enable) |
| { |
| int ret = -ENODEV; |
| struct listnode *node_i; |
| struct usb_card_config *card_info; |
| int i; |
| ALOGV("%s: card_dev_type (0x%x), sidetone enable(%d)", |
| __func__, device, enable); |
| |
| list_for_each(node_i, &usbmod->usb_card_conf_list) { |
| card_info = node_to_item(node_i, struct usb_card_config, list); |
| ALOGV("%s: card_dev_type (0x%x), card_no(%d)", |
| __func__, card_info->usb_device_type, card_info->usb_card); |
| if (card_info->usb_device_type == AUDIO_DEVICE_OUT_USB_DEVICE) { |
| if ((i = card_info->usb_sidetone_index[USB_SIDETONE_ENABLE_INDEX]) != -1) { |
| struct mixer_ctl *ctl = mixer_get_ctl_by_name( |
| card_info->usb_snd_mixer, |
| usb_sidetone_enable_str[i]); |
| if (ctl) |
| mixer_ctl_set_value(ctl, 0, enable); |
| else |
| break; |
| |
| if ((i = card_info->usb_sidetone_index[USB_SIDETONE_VOLUME_INDEX]) != -1) { |
| ctl = mixer_get_ctl_by_name( |
| card_info->usb_snd_mixer, |
| usb_sidetone_volume_str[i]); |
| if (ctl == NULL) |
| ALOGV("%s: sidetone gain mixer command is not found", |
| __func__); |
| else if (enable) |
| mixer_ctl_set_value(ctl, 0, |
| usb_get_sidetone_gain(card_info)); |
| } |
| ret = 0; |
| break; |
| } |
| } |
| } |
| return ret; |
| } |
| |
| bool audio_extn_usb_is_config_supported(unsigned int *bit_width, |
| unsigned int *sample_rate, |
| unsigned int ch) |
| { |
| struct listnode *node_i; |
| struct usb_card_config *card_info; |
| bool is_usb_supported = false; |
| |
| ALOGV("%s: from stream: bit-width(%d) sample_rate(%d) ch(%d)", |
| __func__, *bit_width, *sample_rate, ch); |
| list_for_each(node_i, &usbmod->usb_card_conf_list) { |
| card_info = node_to_item(node_i, struct usb_card_config, list); |
| ALOGI_IF(usb_audio_debug_enable, |
| "%s: card_dev_type (0x%x), card_no(%d)", |
| __func__, card_info->usb_device_type, card_info->usb_card); |
| /* Currently only apply the first playback sound card configuration */ |
| if (card_info->usb_device_type == AUDIO_DEVICE_OUT_USB_DEVICE) { |
| is_usb_supported = usb_audio_backend_apply_policy( |
| &card_info->usb_device_conf_list, |
| bit_width, |
| sample_rate, |
| ch); |
| break; |
| } |
| } |
| ALOGV("%s: updated: bit-width(%d) sample_rate(%d)", |
| __func__, *bit_width, *sample_rate); |
| |
| return is_usb_supported; |
| } |
| |
| void audio_extn_usb_add_device(audio_devices_t device, int card) |
| { |
| struct usb_card_config *usb_card_info; |
| char check_debug_enable[PROPERTY_VALUE_MAX]; |
| |
| property_get("audio.usb.enable.debug", check_debug_enable, NULL); |
| if (atoi(check_debug_enable)) { |
| usb_audio_debug_enable = true; |
| } |
| |
| ALOGI_IF(usb_audio_debug_enable, |
| "%s: parameters device(0x%x), card(%d)", |
| __func__, device, card); |
| if (usbmod == NULL) { |
| ALOGE("%s: USB device object is NULL", __func__); |
| goto exit; |
| } |
| |
| if (!(usb_valid_device(device)) || (card < 0)) { |
| ALOGE("%s:device(0x%x), card(%d)", |
| __func__, device, card); |
| goto exit; |
| } |
| |
| usb_card_info = calloc(1, sizeof(struct usb_card_config)); |
| if (usb_card_info == NULL) { |
| ALOGE("%s: error unable to allocate memory", |
| __func__); |
| goto exit; |
| } |
| list_init(&usb_card_info->usb_device_conf_list); |
| if (device & AUDIO_DEVICE_OUT_USB_DEVICE) { |
| if (!usb_get_device_pb_config(usb_card_info, card)){ |
| usb_card_info->usb_card = card; |
| usb_card_info->usb_device_type = AUDIO_DEVICE_OUT_USB_DEVICE; |
| usb_get_sidetone_mixer(usb_card_info); |
| list_add_tail(&usbmod->usb_card_conf_list, &usb_card_info->list); |
| goto exit; |
| } |
| } else if (device & AUDIO_DEVICE_IN_USB_DEVICE) { |
| if (!usb_get_device_cap_config(usb_card_info, card)) { |
| usb_card_info->usb_card = card; |
| usb_card_info->usb_device_type = AUDIO_DEVICE_IN_USB_DEVICE; |
| list_add_tail(&usbmod->usb_card_conf_list, &usb_card_info->list); |
| goto exit; |
| } |
| } |
| /* free memory in error case */ |
| if (usb_card_info != NULL) |
| free(usb_card_info); |
| exit: |
| if (usb_audio_debug_enable) |
| usb_print_active_device(); |
| return; |
| } |
| |
| void audio_extn_usb_remove_device(audio_devices_t device, int card) |
| { |
| struct listnode *node_i, *temp_i; |
| struct listnode *node_j, *temp_j; |
| struct usb_device_config *dev_info; |
| struct usb_card_config *card_info; |
| unsigned int i; |
| |
| ALOGV("%s: device(0x%x), card(%d)", |
| __func__, device, card); |
| |
| if (usbmod == NULL) { |
| ALOGE("%s: USB device object is NULL", __func__); |
| goto exit; |
| } |
| |
| if (!(usb_valid_device(device)) || (card < 0)) { |
| ALOGE("%s: Invalid parameters device(0x%x), card(%d)", |
| __func__, device, card); |
| goto exit; |
| } |
| list_for_each_safe(node_i, temp_i, &usbmod->usb_card_conf_list) { |
| card_info = node_to_item(node_i, struct usb_card_config, list); |
| ALOGV("%s: card_dev_type (0x%x), card_no(%d)", |
| __func__, card_info->usb_device_type, card_info->usb_card); |
| if ((device == card_info->usb_device_type) && (card == card_info->usb_card)){ |
| list_for_each_safe(node_j, temp_j, &card_info->usb_device_conf_list) { |
| dev_info = node_to_item(node_j, struct usb_device_config, list); |
| ALOGV("%s: bit-width(%d) channel(%d)", |
| __func__, dev_info->bit_width, dev_info->channels); |
| for (i = 0; i < dev_info->rate_size; i++) |
| ALOGV("%s: rate %d", __func__, dev_info->rates[i]); |
| |
| list_remove(node_j); |
| free(node_to_item(node_j, struct usb_device_config, list)); |
| } |
| list_remove(node_i); |
| free(node_to_item(node_i, struct usb_card_config, list)); |
| } |
| } |
| exit: |
| if (usb_audio_debug_enable) |
| usb_print_active_device(); |
| |
| return; |
| } |
| |
| void audio_extn_usb_init(void *adev) |
| { |
| if (usbmod == NULL) { |
| usbmod = calloc(1, sizeof(struct usb_module)); |
| if (usbmod == NULL) { |
| ALOGE("%s: error unable to allocate memory", __func__); |
| goto exit; |
| } |
| } |
| list_init(&usbmod->usb_card_conf_list); |
| usbmod->adev = (struct audio_device*)adev; |
| usbmod->sidetone_gain = usb_sidetone_gain; |
| exit: |
| return; |
| } |
| |
| void audio_extn_usb_deinit(void) |
| { |
| if (NULL != usbmod){ |
| free(usbmod); |
| usbmod = NULL; |
| } |
| } |
| #endif /*USB_HEADSET_ENABLED end*/ |