| /* |
| * Copyright (c) 2016, 2017, Oracle and/or its affiliates. All rights reserved. |
| * Copyright (c) 2016, 2017 SAP SE. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| * |
| */ |
| |
| // Major contributions by AHa, AS, JL, ML. |
| |
| #include "precompiled.hpp" |
| #include "asm/macroAssembler.inline.hpp" |
| #include "interp_masm_s390.hpp" |
| #include "interpreter/interpreter.hpp" |
| #include "interpreter/interpreterRuntime.hpp" |
| #include "oops/arrayOop.hpp" |
| #include "oops/markOop.hpp" |
| #include "prims/jvmtiExport.hpp" |
| #include "prims/jvmtiThreadState.hpp" |
| #include "runtime/basicLock.hpp" |
| #include "runtime/biasedLocking.hpp" |
| #include "runtime/sharedRuntime.hpp" |
| #include "runtime/thread.inline.hpp" |
| |
| // Implementation of InterpreterMacroAssembler. |
| // This file specializes the assember with interpreter-specific macros. |
| |
| #ifdef PRODUCT |
| #define BLOCK_COMMENT(str) |
| #define BIND(label) bind(label); |
| #else |
| #define BLOCK_COMMENT(str) block_comment(str) |
| #define BIND(label) bind(label); BLOCK_COMMENT(#label ":") |
| #endif |
| |
| void InterpreterMacroAssembler::jump_to_entry(address entry, Register Rscratch) { |
| assert(entry != NULL, "Entry must have been generated by now"); |
| assert(Rscratch != Z_R0, "Can't use R0 for addressing"); |
| branch_optimized(Assembler::bcondAlways, entry); |
| } |
| |
| void InterpreterMacroAssembler::empty_expression_stack(void) { |
| get_monitors(Z_R1_scratch); |
| add2reg(Z_esp, -Interpreter::stackElementSize, Z_R1_scratch); |
| } |
| |
| // Dispatch code executed in the prolog of a bytecode which does not do it's |
| // own dispatch. |
| void InterpreterMacroAssembler::dispatch_prolog(TosState state, int bcp_incr) { |
| // On z/Architecture we are short on registers, therefore we do not preload the |
| // dispatch address of the next bytecode. |
| } |
| |
| // Dispatch code executed in the epilog of a bytecode which does not do it's |
| // own dispatch. |
| void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) { |
| dispatch_next(state, step); |
| } |
| |
| void InterpreterMacroAssembler::dispatch_next(TosState state, int bcp_incr) { |
| z_llgc(Z_bytecode, bcp_incr, Z_R0, Z_bcp); // Load next bytecode. |
| add2reg(Z_bcp, bcp_incr); // Advance bcp. Add2reg produces optimal code. |
| dispatch_base(state, Interpreter::dispatch_table(state)); |
| } |
| |
| // Common code to dispatch and dispatch_only. |
| // Dispatch value in Lbyte_code and increment Lbcp. |
| |
| void InterpreterMacroAssembler::dispatch_base(TosState state, address* table) { |
| verify_FPU(1, state); |
| |
| #ifdef ASSERT |
| address reentry = NULL; |
| { Label OK; |
| // Check if the frame pointer in Z_fp is correct. |
| z_cg(Z_fp, 0, Z_SP); |
| z_bre(OK); |
| reentry = stop_chain_static(reentry, "invalid frame pointer Z_fp: " FILE_AND_LINE); |
| bind(OK); |
| } |
| { Label OK; |
| // check if the locals pointer in Z_locals is correct |
| z_cg(Z_locals, _z_ijava_state_neg(locals), Z_fp); |
| z_bre(OK); |
| reentry = stop_chain_static(reentry, "invalid locals pointer Z_locals: " FILE_AND_LINE); |
| bind(OK); |
| } |
| #endif |
| |
| // TODO: Maybe implement +VerifyActivationFrameSize here. |
| // verify_thread(); // Too slow. We will just verify on method entry & exit. |
| verify_oop(Z_tos, state); |
| |
| // Dispatch table to use. |
| load_absolute_address(Z_tmp_1, (address) table); // Z_tmp_1 = table; |
| |
| // 0 <= Z_bytecode < 256 => Use a 32 bit shift, because it is shorter than sllg. |
| // Z_bytecode must have been loaded zero-extended for this approach to be correct. |
| z_sll(Z_bytecode, LogBytesPerWord, Z_R0); // Multiply by wordSize. |
| z_lg(Z_tmp_1, 0, Z_bytecode, Z_tmp_1); // Get entry addr. |
| |
| z_br(Z_tmp_1); |
| } |
| |
| void InterpreterMacroAssembler::dispatch_only(TosState state) { |
| dispatch_base(state, Interpreter::dispatch_table(state)); |
| } |
| |
| void InterpreterMacroAssembler::dispatch_only_normal(TosState state) { |
| dispatch_base(state, Interpreter::normal_table(state)); |
| } |
| |
| void InterpreterMacroAssembler::dispatch_via(TosState state, address *table) { |
| // Load current bytecode. |
| z_llgc(Z_bytecode, Address(Z_bcp, (intptr_t)0)); |
| dispatch_base(state, table); |
| } |
| |
| // The following call_VM*_base() methods overload and mask the respective |
| // declarations/definitions in class MacroAssembler. They are meant as a "detour" |
| // to perform additional, template interpreter specific tasks before actually |
| // calling their MacroAssembler counterparts. |
| |
| void InterpreterMacroAssembler::call_VM_leaf_base(address entry_point) { |
| bool allow_relocation = true; // Fenerally valid variant. Assume code is relocated. |
| // interpreter specific |
| // Note: No need to save/restore bcp (Z_R13) pointer since these are callee |
| // saved registers and no blocking/ GC can happen in leaf calls. |
| |
| // super call |
| MacroAssembler::call_VM_leaf_base(entry_point, allow_relocation); |
| } |
| |
| void InterpreterMacroAssembler::call_VM_leaf_base(address entry_point, bool allow_relocation) { |
| // interpreter specific |
| // Note: No need to save/restore bcp (Z_R13) pointer since these are callee |
| // saved registers and no blocking/ GC can happen in leaf calls. |
| |
| // super call |
| MacroAssembler::call_VM_leaf_base(entry_point, allow_relocation); |
| } |
| |
| void InterpreterMacroAssembler::call_VM_base(Register oop_result, Register last_java_sp, |
| address entry_point, bool check_exceptions) { |
| bool allow_relocation = true; // Fenerally valid variant. Assume code is relocated. |
| // interpreter specific |
| |
| save_bcp(); |
| save_esp(); |
| // super call |
| MacroAssembler::call_VM_base(oop_result, last_java_sp, |
| entry_point, allow_relocation, check_exceptions); |
| restore_bcp(); |
| } |
| |
| void InterpreterMacroAssembler::call_VM_base(Register oop_result, Register last_java_sp, |
| address entry_point, bool allow_relocation, |
| bool check_exceptions) { |
| // interpreter specific |
| |
| save_bcp(); |
| save_esp(); |
| // super call |
| MacroAssembler::call_VM_base(oop_result, last_java_sp, |
| entry_point, allow_relocation, check_exceptions); |
| restore_bcp(); |
| } |
| |
| void InterpreterMacroAssembler::check_and_handle_popframe(Register scratch_reg) { |
| if (JvmtiExport::can_pop_frame()) { |
| BLOCK_COMMENT("check_and_handle_popframe {"); |
| Label L; |
| // Initiate popframe handling only if it is not already being |
| // processed. If the flag has the popframe_processing bit set, it |
| // means that this code is called *during* popframe handling - we |
| // don't want to reenter. |
| // TODO: Check if all four state combinations could be visible. |
| // If (processing and !pending) is an invisible/impossible state, |
| // there is optimization potential by testing both bits at once. |
| // Then, All_Zeroes and All_Ones means skip, Mixed means doit. |
| testbit(Address(Z_thread, JavaThread::popframe_condition_offset()), |
| exact_log2(JavaThread::popframe_pending_bit)); |
| z_bfalse(L); |
| testbit(Address(Z_thread, JavaThread::popframe_condition_offset()), |
| exact_log2(JavaThread::popframe_processing_bit)); |
| z_btrue(L); |
| |
| // Call Interpreter::remove_activation_preserving_args_entry() to get the |
| // address of the same-named entrypoint in the generated interpreter code. |
| call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry)); |
| // The above call should (as its only effect) return the contents of the field |
| // _remove_activation_preserving_args_entry in Z_RET. |
| // We just jump there to have the work done. |
| z_br(Z_RET); |
| // There is no way for control to fall thru here. |
| |
| bind(L); |
| BLOCK_COMMENT("} check_and_handle_popframe"); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::load_earlyret_value(TosState state) { |
| Register RjvmtiState = Z_R1_scratch; |
| int tos_off = in_bytes(JvmtiThreadState::earlyret_tos_offset()); |
| int oop_off = in_bytes(JvmtiThreadState::earlyret_oop_offset()); |
| int val_off = in_bytes(JvmtiThreadState::earlyret_value_offset()); |
| int state_off = in_bytes(JavaThread::jvmti_thread_state_offset()); |
| |
| z_lg(RjvmtiState, state_off, Z_thread); |
| |
| switch (state) { |
| case atos: z_lg(Z_tos, oop_off, RjvmtiState); |
| store_const(Address(RjvmtiState, oop_off), 0L, 8, 8, Z_R0_scratch); |
| break; |
| case ltos: z_lg(Z_tos, val_off, RjvmtiState); break; |
| case btos: // fall through |
| case ztos: // fall through |
| case ctos: // fall through |
| case stos: // fall through |
| case itos: z_llgf(Z_tos, val_off, RjvmtiState); break; |
| case ftos: z_le(Z_ftos, val_off, RjvmtiState); break; |
| case dtos: z_ld(Z_ftos, val_off, RjvmtiState); break; |
| case vtos: /* nothing to do */ break; |
| default : ShouldNotReachHere(); |
| } |
| |
| // Clean up tos value in the jvmti thread state. |
| store_const(Address(RjvmtiState, val_off), 0L, 8, 8, Z_R0_scratch); |
| // Set tos state field to illegal value. |
| store_const(Address(RjvmtiState, tos_off), ilgl, 4, 1, Z_R0_scratch); |
| } |
| |
| void InterpreterMacroAssembler::check_and_handle_earlyret(Register scratch_reg) { |
| if (JvmtiExport::can_force_early_return()) { |
| BLOCK_COMMENT("check_and_handle_earlyret {"); |
| Label L; |
| // arg regs are save, because we are just behind the call in call_VM_base |
| Register jvmti_thread_state = Z_ARG2; |
| Register tmp = Z_ARG3; |
| load_and_test_long(jvmti_thread_state, Address(Z_thread, JavaThread::jvmti_thread_state_offset())); |
| z_bre(L); // if (thread->jvmti_thread_state() == NULL) exit; |
| |
| // Initiate earlyret handling only if it is not already being processed. |
| // If the flag has the earlyret_processing bit set, it means that this code |
| // is called *during* earlyret handling - we don't want to reenter. |
| |
| assert((JvmtiThreadState::earlyret_pending != 0) && (JvmtiThreadState::earlyret_inactive == 0), |
| "must fix this check, when changing the values of the earlyret enum"); |
| assert(JvmtiThreadState::earlyret_pending == 1, "must fix this check, when changing the values of the earlyret enum"); |
| |
| load_and_test_int(tmp, Address(jvmti_thread_state, JvmtiThreadState::earlyret_state_offset())); |
| z_brz(L); // if (thread->jvmti_thread_state()->_earlyret_state != JvmtiThreadState::earlyret_pending) exit; |
| |
| // Call Interpreter::remove_activation_early_entry() to get the address of the |
| // same-named entrypoint in the generated interpreter code. |
| assert(sizeof(TosState) == 4, "unexpected size"); |
| z_l(Z_ARG1, Address(jvmti_thread_state, JvmtiThreadState::earlyret_tos_offset())); |
| call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), Z_ARG1); |
| // The above call should (as its only effect) return the contents of the field |
| // _remove_activation_preserving_args_entry in Z_RET. |
| // We just jump there to have the work done. |
| z_br(Z_RET); |
| // There is no way for control to fall thru here. |
| |
| bind(L); |
| BLOCK_COMMENT("} check_and_handle_earlyret"); |
| } |
| } |
| |
| void InterpreterMacroAssembler::super_call_VM_leaf(address entry_point, Register arg_1, Register arg_2) { |
| lgr_if_needed(Z_ARG1, arg_1); |
| assert(arg_2 != Z_ARG1, "smashed argument"); |
| lgr_if_needed(Z_ARG2, arg_2); |
| MacroAssembler::call_VM_leaf_base(entry_point, true); |
| } |
| |
| void InterpreterMacroAssembler::get_cache_index_at_bcp(Register index, int bcp_offset, size_t index_size) { |
| Address param(Z_bcp, bcp_offset); |
| |
| BLOCK_COMMENT("get_cache_index_at_bcp {"); |
| assert(bcp_offset > 0, "bcp is still pointing to start of bytecode"); |
| if (index_size == sizeof(u2)) { |
| load_sized_value(index, param, 2, false /*signed*/); |
| } else if (index_size == sizeof(u4)) { |
| |
| load_sized_value(index, param, 4, false); |
| |
| // Check if the secondary index definition is still ~x, otherwise |
| // we have to change the following assembler code to calculate the |
| // plain index. |
| assert(ConstantPool::decode_invokedynamic_index(~123) == 123, "else change next line"); |
| not_(index); // Convert to plain index. |
| } else if (index_size == sizeof(u1)) { |
| z_llgc(index, param); |
| } else { |
| ShouldNotReachHere(); |
| } |
| BLOCK_COMMENT("}"); |
| } |
| |
| |
| void InterpreterMacroAssembler::get_cache_and_index_at_bcp(Register cache, Register cpe_offset, |
| int bcp_offset, size_t index_size) { |
| BLOCK_COMMENT("get_cache_and_index_at_bcp {"); |
| assert_different_registers(cache, cpe_offset); |
| get_cache_index_at_bcp(cpe_offset, bcp_offset, index_size); |
| z_lg(cache, Address(Z_fp, _z_ijava_state_neg(cpoolCache))); |
| // Convert from field index to ConstantPoolCache offset in bytes. |
| z_sllg(cpe_offset, cpe_offset, exact_log2(in_words(ConstantPoolCacheEntry::size()) * BytesPerWord)); |
| BLOCK_COMMENT("}"); |
| } |
| |
| // Kills Z_R0_scratch. |
| void InterpreterMacroAssembler::get_cache_and_index_and_bytecode_at_bcp(Register cache, |
| Register cpe_offset, |
| Register bytecode, |
| int byte_no, |
| int bcp_offset, |
| size_t index_size) { |
| BLOCK_COMMENT("get_cache_and_index_and_bytecode_at_bcp {"); |
| get_cache_and_index_at_bcp(cache, cpe_offset, bcp_offset, index_size); |
| |
| // We want to load (from CP cache) the bytecode that corresponds to the passed-in byte_no. |
| // It is located at (cache + cpe_offset + base_offset + indices_offset + (8-1) (last byte in DW) - (byte_no+1). |
| // Instead of loading, shifting and masking a DW, we just load that one byte of interest with z_llgc (unsigned). |
| const int base_ix_off = in_bytes(ConstantPoolCache::base_offset() + ConstantPoolCacheEntry::indices_offset()); |
| const int off_in_DW = (8-1) - (1+byte_no); |
| assert(ConstantPoolCacheEntry::bytecode_1_mask == ConstantPoolCacheEntry::bytecode_2_mask, "common mask"); |
| assert(ConstantPoolCacheEntry::bytecode_1_mask == 0xff, ""); |
| load_sized_value(bytecode, Address(cache, cpe_offset, base_ix_off+off_in_DW), 1, false /*signed*/); |
| |
| BLOCK_COMMENT("}"); |
| } |
| |
| // Load object from cpool->resolved_references(index). |
| void InterpreterMacroAssembler::load_resolved_reference_at_index(Register result, Register index) { |
| assert_different_registers(result, index); |
| get_constant_pool(result); |
| |
| // Convert |
| // - from field index to resolved_references() index and |
| // - from word index to byte offset. |
| // Since this is a java object, it is potentially compressed. |
| Register tmp = index; // reuse |
| z_sllg(index, index, LogBytesPerHeapOop); // Offset into resolved references array. |
| // Load pointer for resolved_references[] objArray. |
| z_lg(result, ConstantPool::cache_offset_in_bytes(), result); |
| z_lg(result, ConstantPoolCache::resolved_references_offset_in_bytes(), result); |
| resolve_oop_handle(result); // Load resolved references array itself. |
| #ifdef ASSERT |
| NearLabel index_ok; |
| z_lgf(Z_R0, Address(result, arrayOopDesc::length_offset_in_bytes())); |
| z_sllg(Z_R0, Z_R0, LogBytesPerHeapOop); |
| compare64_and_branch(tmp, Z_R0, Assembler::bcondLow, index_ok); |
| stop("resolved reference index out of bounds", 0x09256); |
| bind(index_ok); |
| #endif |
| z_agr(result, index); // Address of indexed array element. |
| load_heap_oop(result, arrayOopDesc::base_offset_in_bytes(T_OBJECT), result); |
| } |
| |
| // load cpool->resolved_klass_at(index) |
| void InterpreterMacroAssembler::load_resolved_klass_at_offset(Register cpool, Register offset, Register iklass) { |
| // int value = *(Rcpool->int_at_addr(which)); |
| // int resolved_klass_index = extract_low_short_from_int(value); |
| z_llgh(offset, Address(cpool, offset, sizeof(ConstantPool) + 2)); // offset = resolved_klass_index (s390 is big-endian) |
| z_sllg(offset, offset, LogBytesPerWord); // Convert 'index' to 'offset' |
| z_lg(iklass, Address(cpool, ConstantPool::resolved_klasses_offset_in_bytes())); // iklass = cpool->_resolved_klasses |
| z_lg(iklass, Address(iklass, offset, Array<Klass*>::base_offset_in_bytes())); |
| } |
| |
| void InterpreterMacroAssembler::get_cache_entry_pointer_at_bcp(Register cache, |
| Register tmp, |
| int bcp_offset, |
| size_t index_size) { |
| BLOCK_COMMENT("get_cache_entry_pointer_at_bcp {"); |
| get_cache_and_index_at_bcp(cache, tmp, bcp_offset, index_size); |
| add2reg_with_index(cache, in_bytes(ConstantPoolCache::base_offset()), tmp, cache); |
| BLOCK_COMMENT("}"); |
| } |
| |
| // Generate a subtype check: branch to ok_is_subtype if sub_klass is |
| // a subtype of super_klass. Blows registers Rsuper_klass, Rsub_klass, tmp1, tmp2. |
| void InterpreterMacroAssembler::gen_subtype_check(Register Rsub_klass, |
| Register Rsuper_klass, |
| Register Rtmp1, |
| Register Rtmp2, |
| Label &ok_is_subtype) { |
| // Profile the not-null value's klass. |
| profile_typecheck(Rtmp1, Rsub_klass, Rtmp2); |
| |
| // Do the check. |
| check_klass_subtype(Rsub_klass, Rsuper_klass, Rtmp1, Rtmp2, ok_is_subtype); |
| |
| // Profile the failure of the check. |
| profile_typecheck_failed(Rtmp1, Rtmp2); |
| } |
| |
| // Pop topmost element from stack. It just disappears. |
| // Useful if consumed previously by access via stackTop(). |
| void InterpreterMacroAssembler::popx(int len) { |
| add2reg(Z_esp, len*Interpreter::stackElementSize); |
| debug_only(verify_esp(Z_esp, Z_R1_scratch)); |
| } |
| |
| // Get Address object of stack top. No checks. No pop. |
| // Purpose: - Provide address of stack operand to exploit reg-mem operations. |
| // - Avoid RISC-like mem2reg - reg-reg-op sequence. |
| Address InterpreterMacroAssembler::stackTop() { |
| return Address(Z_esp, Interpreter::expr_offset_in_bytes(0)); |
| } |
| |
| void InterpreterMacroAssembler::pop_i(Register r) { |
| z_l(r, Interpreter::expr_offset_in_bytes(0), Z_esp); |
| add2reg(Z_esp, Interpreter::stackElementSize); |
| assert_different_registers(r, Z_R1_scratch); |
| debug_only(verify_esp(Z_esp, Z_R1_scratch)); |
| } |
| |
| void InterpreterMacroAssembler::pop_ptr(Register r) { |
| z_lg(r, Interpreter::expr_offset_in_bytes(0), Z_esp); |
| add2reg(Z_esp, Interpreter::stackElementSize); |
| assert_different_registers(r, Z_R1_scratch); |
| debug_only(verify_esp(Z_esp, Z_R1_scratch)); |
| } |
| |
| void InterpreterMacroAssembler::pop_l(Register r) { |
| z_lg(r, Interpreter::expr_offset_in_bytes(0), Z_esp); |
| add2reg(Z_esp, 2*Interpreter::stackElementSize); |
| assert_different_registers(r, Z_R1_scratch); |
| debug_only(verify_esp(Z_esp, Z_R1_scratch)); |
| } |
| |
| void InterpreterMacroAssembler::pop_f(FloatRegister f) { |
| mem2freg_opt(f, Address(Z_esp, Interpreter::expr_offset_in_bytes(0)), false); |
| add2reg(Z_esp, Interpreter::stackElementSize); |
| debug_only(verify_esp(Z_esp, Z_R1_scratch)); |
| } |
| |
| void InterpreterMacroAssembler::pop_d(FloatRegister f) { |
| mem2freg_opt(f, Address(Z_esp, Interpreter::expr_offset_in_bytes(0)), true); |
| add2reg(Z_esp, 2*Interpreter::stackElementSize); |
| debug_only(verify_esp(Z_esp, Z_R1_scratch)); |
| } |
| |
| void InterpreterMacroAssembler::push_i(Register r) { |
| assert_different_registers(r, Z_R1_scratch); |
| debug_only(verify_esp(Z_esp, Z_R1_scratch)); |
| z_st(r, Address(Z_esp)); |
| add2reg(Z_esp, -Interpreter::stackElementSize); |
| } |
| |
| void InterpreterMacroAssembler::push_ptr(Register r) { |
| z_stg(r, Address(Z_esp)); |
| add2reg(Z_esp, -Interpreter::stackElementSize); |
| } |
| |
| void InterpreterMacroAssembler::push_l(Register r) { |
| assert_different_registers(r, Z_R1_scratch); |
| debug_only(verify_esp(Z_esp, Z_R1_scratch)); |
| int offset = -Interpreter::stackElementSize; |
| z_stg(r, Address(Z_esp, offset)); |
| clear_mem(Address(Z_esp), Interpreter::stackElementSize); |
| add2reg(Z_esp, 2 * offset); |
| } |
| |
| void InterpreterMacroAssembler::push_f(FloatRegister f) { |
| debug_only(verify_esp(Z_esp, Z_R1_scratch)); |
| freg2mem_opt(f, Address(Z_esp), false); |
| add2reg(Z_esp, -Interpreter::stackElementSize); |
| } |
| |
| void InterpreterMacroAssembler::push_d(FloatRegister d) { |
| debug_only(verify_esp(Z_esp, Z_R1_scratch)); |
| int offset = -Interpreter::stackElementSize; |
| freg2mem_opt(d, Address(Z_esp, offset)); |
| add2reg(Z_esp, 2 * offset); |
| } |
| |
| void InterpreterMacroAssembler::push(TosState state) { |
| verify_oop(Z_tos, state); |
| switch (state) { |
| case atos: push_ptr(); break; |
| case btos: push_i(); break; |
| case ztos: |
| case ctos: |
| case stos: push_i(); break; |
| case itos: push_i(); break; |
| case ltos: push_l(); break; |
| case ftos: push_f(); break; |
| case dtos: push_d(); break; |
| case vtos: /* nothing to do */ break; |
| default : ShouldNotReachHere(); |
| } |
| } |
| |
| void InterpreterMacroAssembler::pop(TosState state) { |
| switch (state) { |
| case atos: pop_ptr(Z_tos); break; |
| case btos: pop_i(Z_tos); break; |
| case ztos: |
| case ctos: |
| case stos: pop_i(Z_tos); break; |
| case itos: pop_i(Z_tos); break; |
| case ltos: pop_l(Z_tos); break; |
| case ftos: pop_f(Z_ftos); break; |
| case dtos: pop_d(Z_ftos); break; |
| case vtos: /* nothing to do */ break; |
| default : ShouldNotReachHere(); |
| } |
| verify_oop(Z_tos, state); |
| } |
| |
| // Helpers for swap and dup. |
| void InterpreterMacroAssembler::load_ptr(int n, Register val) { |
| z_lg(val, Address(Z_esp, Interpreter::expr_offset_in_bytes(n))); |
| } |
| |
| void InterpreterMacroAssembler::store_ptr(int n, Register val) { |
| z_stg(val, Address(Z_esp, Interpreter::expr_offset_in_bytes(n))); |
| } |
| |
| void InterpreterMacroAssembler::prepare_to_jump_from_interpreted(Register method) { |
| // Satisfy interpreter calling convention (see generate_normal_entry()). |
| z_lgr(Z_R10, Z_SP); // Set sender sp (aka initial caller sp, aka unextended sp). |
| // Record top_frame_sp, because the callee might modify it, if it's compiled. |
| z_stg(Z_SP, _z_ijava_state_neg(top_frame_sp), Z_fp); |
| save_bcp(); |
| save_esp(); |
| z_lgr(Z_method, method); // Set Z_method (kills Z_fp!). |
| } |
| |
| // Jump to from_interpreted entry of a call unless single stepping is possible |
| // in this thread in which case we must call the i2i entry. |
| void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) { |
| assert_different_registers(method, Z_R10 /*used for initial_caller_sp*/, temp); |
| prepare_to_jump_from_interpreted(method); |
| |
| if (JvmtiExport::can_post_interpreter_events()) { |
| // JVMTI events, such as single-stepping, are implemented partly by avoiding running |
| // compiled code in threads for which the event is enabled. Check here for |
| // interp_only_mode if these events CAN be enabled. |
| z_lg(Z_R1_scratch, Address(method, Method::from_interpreted_offset())); |
| MacroAssembler::load_and_test_int(Z_R0_scratch, Address(Z_thread, JavaThread::interp_only_mode_offset())); |
| z_bcr(bcondEqual, Z_R1_scratch); // Run compiled code if zero. |
| // Run interpreted. |
| z_lg(Z_R1_scratch, Address(method, Method::interpreter_entry_offset())); |
| z_br(Z_R1_scratch); |
| } else { |
| // Run compiled code. |
| z_lg(Z_R1_scratch, Address(method, Method::from_interpreted_offset())); |
| z_br(Z_R1_scratch); |
| } |
| } |
| |
| #ifdef ASSERT |
| void InterpreterMacroAssembler::verify_esp(Register Resp, Register Rtemp) { |
| // About to read or write Resp[0]. |
| // Make sure it is not in the monitors or the TOP_IJAVA_FRAME_ABI. |
| address reentry = NULL; |
| |
| { |
| // Check if the frame pointer in Z_fp is correct. |
| NearLabel OK; |
| z_cg(Z_fp, 0, Z_SP); |
| z_bre(OK); |
| reentry = stop_chain_static(reentry, "invalid frame pointer Z_fp"); |
| bind(OK); |
| } |
| { |
| // Resp must not point into or below the operand stack, |
| // i.e. IJAVA_STATE.monitors > Resp. |
| NearLabel OK; |
| Register Rmonitors = Rtemp; |
| z_lg(Rmonitors, _z_ijava_state_neg(monitors), Z_fp); |
| compareU64_and_branch(Rmonitors, Resp, bcondHigh, OK); |
| reentry = stop_chain_static(reentry, "too many pops: Z_esp points into monitor area"); |
| bind(OK); |
| } |
| { |
| // Resp may point to the last word of TOP_IJAVA_FRAME_ABI, but not below |
| // i.e. !(Z_SP + frame::z_top_ijava_frame_abi_size - Interpreter::stackElementSize > Resp). |
| NearLabel OK; |
| Register Rabi_bottom = Rtemp; |
| add2reg(Rabi_bottom, frame::z_top_ijava_frame_abi_size - Interpreter::stackElementSize, Z_SP); |
| compareU64_and_branch(Rabi_bottom, Resp, bcondNotHigh, OK); |
| reentry = stop_chain_static(reentry, "too many pushes: Z_esp points into TOP_IJAVA_FRAME_ABI"); |
| bind(OK); |
| } |
| } |
| |
| void InterpreterMacroAssembler::asm_assert_ijava_state_magic(Register tmp) { |
| Label magic_ok; |
| load_const_optimized(tmp, frame::z_istate_magic_number); |
| z_cg(tmp, Address(Z_fp, _z_ijava_state_neg(magic))); |
| z_bre(magic_ok); |
| stop_static("error: wrong magic number in ijava_state access"); |
| bind(magic_ok); |
| } |
| #endif // ASSERT |
| |
| void InterpreterMacroAssembler::save_bcp() { |
| z_stg(Z_bcp, Address(Z_fp, _z_ijava_state_neg(bcp))); |
| asm_assert_ijava_state_magic(Z_bcp); |
| NOT_PRODUCT(z_lg(Z_bcp, Address(Z_fp, _z_ijava_state_neg(bcp)))); |
| } |
| |
| void InterpreterMacroAssembler::restore_bcp() { |
| asm_assert_ijava_state_magic(Z_bcp); |
| z_lg(Z_bcp, Address(Z_fp, _z_ijava_state_neg(bcp))); |
| } |
| |
| void InterpreterMacroAssembler::save_esp() { |
| z_stg(Z_esp, Address(Z_fp, _z_ijava_state_neg(esp))); |
| } |
| |
| void InterpreterMacroAssembler::restore_esp() { |
| asm_assert_ijava_state_magic(Z_esp); |
| z_lg(Z_esp, Address(Z_fp, _z_ijava_state_neg(esp))); |
| } |
| |
| void InterpreterMacroAssembler::get_monitors(Register reg) { |
| asm_assert_ijava_state_magic(reg); |
| mem2reg_opt(reg, Address(Z_fp, _z_ijava_state_neg(monitors))); |
| } |
| |
| void InterpreterMacroAssembler::save_monitors(Register reg) { |
| reg2mem_opt(reg, Address(Z_fp, _z_ijava_state_neg(monitors))); |
| } |
| |
| void InterpreterMacroAssembler::get_mdp(Register mdp) { |
| z_lg(mdp, _z_ijava_state_neg(mdx), Z_fp); |
| } |
| |
| void InterpreterMacroAssembler::save_mdp(Register mdp) { |
| z_stg(mdp, _z_ijava_state_neg(mdx), Z_fp); |
| } |
| |
| // Values that are only read (besides initialization). |
| void InterpreterMacroAssembler::restore_locals() { |
| asm_assert_ijava_state_magic(Z_locals); |
| z_lg(Z_locals, Address(Z_fp, _z_ijava_state_neg(locals))); |
| } |
| |
| void InterpreterMacroAssembler::get_method(Register reg) { |
| asm_assert_ijava_state_magic(reg); |
| z_lg(reg, Address(Z_fp, _z_ijava_state_neg(method))); |
| } |
| |
| void InterpreterMacroAssembler::get_2_byte_integer_at_bcp(Register Rdst, int bcp_offset, |
| signedOrNot is_signed) { |
| // Rdst is an 8-byte return value!!! |
| |
| // Unaligned loads incur only a small penalty on z/Architecture. The penalty |
| // is a few (2..3) ticks, even when the load crosses a cache line |
| // boundary. In case of a cache miss, the stall could, of course, be |
| // much longer. |
| |
| switch (is_signed) { |
| case Signed: |
| z_lgh(Rdst, bcp_offset, Z_R0, Z_bcp); |
| break; |
| case Unsigned: |
| z_llgh(Rdst, bcp_offset, Z_R0, Z_bcp); |
| break; |
| default: |
| ShouldNotReachHere(); |
| } |
| } |
| |
| |
| void InterpreterMacroAssembler::get_4_byte_integer_at_bcp(Register Rdst, int bcp_offset, |
| setCCOrNot set_cc) { |
| // Rdst is an 8-byte return value!!! |
| |
| // Unaligned loads incur only a small penalty on z/Architecture. The penalty |
| // is a few (2..3) ticks, even when the load crosses a cache line |
| // boundary. In case of a cache miss, the stall could, of course, be |
| // much longer. |
| |
| // Both variants implement a sign-extending int2long load. |
| if (set_cc == set_CC) { |
| load_and_test_int2long(Rdst, Address(Z_bcp, (intptr_t)bcp_offset)); |
| } else { |
| mem2reg_signed_opt( Rdst, Address(Z_bcp, (intptr_t)bcp_offset)); |
| } |
| } |
| |
| void InterpreterMacroAssembler::get_constant_pool(Register Rdst) { |
| get_method(Rdst); |
| mem2reg_opt(Rdst, Address(Rdst, Method::const_offset())); |
| mem2reg_opt(Rdst, Address(Rdst, ConstMethod::constants_offset())); |
| } |
| |
| void InterpreterMacroAssembler::get_cpool_and_tags(Register Rcpool, Register Rtags) { |
| get_constant_pool(Rcpool); |
| mem2reg_opt(Rtags, Address(Rcpool, ConstantPool::tags_offset_in_bytes())); |
| } |
| |
| // Unlock if synchronized method. |
| // |
| // Unlock the receiver if this is a synchronized method. |
| // Unlock any Java monitors from syncronized blocks. |
| // |
| // If there are locked Java monitors |
| // If throw_monitor_exception |
| // throws IllegalMonitorStateException |
| // Else if install_monitor_exception |
| // installs IllegalMonitorStateException |
| // Else |
| // no error processing |
| void InterpreterMacroAssembler::unlock_if_synchronized_method(TosState state, |
| bool throw_monitor_exception, |
| bool install_monitor_exception) { |
| NearLabel unlocked, unlock, no_unlock; |
| |
| { |
| Register R_method = Z_ARG2; |
| Register R_do_not_unlock_if_synchronized = Z_ARG3; |
| |
| // Get the value of _do_not_unlock_if_synchronized into G1_scratch. |
| const Address do_not_unlock_if_synchronized(Z_thread, |
| JavaThread::do_not_unlock_if_synchronized_offset()); |
| load_sized_value(R_do_not_unlock_if_synchronized, do_not_unlock_if_synchronized, 1, false /*unsigned*/); |
| z_mvi(do_not_unlock_if_synchronized, false); // Reset the flag. |
| |
| // Check if synchronized method. |
| get_method(R_method); |
| verify_oop(Z_tos, state); |
| push(state); // Save tos/result. |
| testbit(method2_(R_method, access_flags), JVM_ACC_SYNCHRONIZED_BIT); |
| z_bfalse(unlocked); |
| |
| // Don't unlock anything if the _do_not_unlock_if_synchronized flag |
| // is set. |
| compareU64_and_branch(R_do_not_unlock_if_synchronized, (intptr_t)0L, bcondNotEqual, no_unlock); |
| } |
| |
| // unlock monitor |
| |
| // BasicObjectLock will be first in list, since this is a |
| // synchronized method. However, need to check that the object has |
| // not been unlocked by an explicit monitorexit bytecode. |
| const Address monitor(Z_fp, -(frame::z_ijava_state_size + (int) sizeof(BasicObjectLock))); |
| // We use Z_ARG2 so that if we go slow path it will be the correct |
| // register for unlock_object to pass to VM directly. |
| load_address(Z_ARG2, monitor); // Address of first monitor. |
| z_lg(Z_ARG3, Address(Z_ARG2, BasicObjectLock::obj_offset_in_bytes())); |
| compareU64_and_branch(Z_ARG3, (intptr_t)0L, bcondNotEqual, unlock); |
| |
| if (throw_monitor_exception) { |
| // Entry already unlocked need to throw an exception. |
| MacroAssembler::call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_illegal_monitor_state_exception)); |
| should_not_reach_here(); |
| } else { |
| // Monitor already unlocked during a stack unroll. |
| // If requested, install an illegal_monitor_state_exception. |
| // Continue with stack unrolling. |
| if (install_monitor_exception) { |
| MacroAssembler::call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::new_illegal_monitor_state_exception)); |
| } |
| z_bru(unlocked); |
| } |
| |
| bind(unlock); |
| |
| unlock_object(Z_ARG2); |
| |
| bind(unlocked); |
| |
| // I0, I1: Might contain return value |
| |
| // Check that all monitors are unlocked. |
| { |
| NearLabel loop, exception, entry, restart; |
| const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; |
| // We use Z_ARG2 so that if we go slow path it will be the correct |
| // register for unlock_object to pass to VM directly. |
| Register R_current_monitor = Z_ARG2; |
| Register R_monitor_block_bot = Z_ARG1; |
| const Address monitor_block_top(Z_fp, _z_ijava_state_neg(monitors)); |
| const Address monitor_block_bot(Z_fp, -frame::z_ijava_state_size); |
| |
| bind(restart); |
| // Starting with top-most entry. |
| z_lg(R_current_monitor, monitor_block_top); |
| // Points to word before bottom of monitor block. |
| load_address(R_monitor_block_bot, monitor_block_bot); |
| z_bru(entry); |
| |
| // Entry already locked, need to throw exception. |
| bind(exception); |
| |
| if (throw_monitor_exception) { |
| // Throw exception. |
| MacroAssembler::call_VM(noreg, |
| CAST_FROM_FN_PTR(address, InterpreterRuntime:: |
| throw_illegal_monitor_state_exception)); |
| should_not_reach_here(); |
| } else { |
| // Stack unrolling. Unlock object and install illegal_monitor_exception. |
| // Unlock does not block, so don't have to worry about the frame. |
| // We don't have to preserve c_rarg1 since we are going to throw an exception. |
| unlock_object(R_current_monitor); |
| if (install_monitor_exception) { |
| call_VM(noreg, CAST_FROM_FN_PTR(address, |
| InterpreterRuntime:: |
| new_illegal_monitor_state_exception)); |
| } |
| z_bru(restart); |
| } |
| |
| bind(loop); |
| // Check if current entry is used. |
| load_and_test_long(Z_R0_scratch, Address(R_current_monitor, BasicObjectLock::obj_offset_in_bytes())); |
| z_brne(exception); |
| |
| add2reg(R_current_monitor, entry_size); // Otherwise advance to next entry. |
| bind(entry); |
| compareU64_and_branch(R_current_monitor, R_monitor_block_bot, bcondNotEqual, loop); |
| } |
| |
| bind(no_unlock); |
| pop(state); |
| verify_oop(Z_tos, state); |
| } |
| |
| // remove activation |
| // |
| // Unlock the receiver if this is a synchronized method. |
| // Unlock any Java monitors from syncronized blocks. |
| // Remove the activation from the stack. |
| // |
| // If there are locked Java monitors |
| // If throw_monitor_exception |
| // throws IllegalMonitorStateException |
| // Else if install_monitor_exception |
| // installs IllegalMonitorStateException |
| // Else |
| // no error processing |
| void InterpreterMacroAssembler::remove_activation(TosState state, |
| Register return_pc, |
| bool throw_monitor_exception, |
| bool install_monitor_exception, |
| bool notify_jvmti) { |
| BLOCK_COMMENT("remove_activation {"); |
| unlock_if_synchronized_method(state, throw_monitor_exception, install_monitor_exception); |
| |
| // Save result (push state before jvmti call and pop it afterwards) and notify jvmti. |
| notify_method_exit(false, state, notify_jvmti ? NotifyJVMTI : SkipNotifyJVMTI); |
| |
| if (StackReservedPages > 0) { |
| BLOCK_COMMENT("reserved_stack_check:"); |
| // Test if reserved zone needs to be enabled. |
| Label no_reserved_zone_enabling; |
| |
| // Compare frame pointers. There is no good stack pointer, as with stack |
| // frame compression we can get different SPs when we do calls. A subsequent |
| // call could have a smaller SP, so that this compare succeeds for an |
| // inner call of the method annotated with ReservedStack. |
| z_lg(Z_R0, Address(Z_SP, (intptr_t)_z_abi(callers_sp))); |
| z_clg(Z_R0, Address(Z_thread, JavaThread::reserved_stack_activation_offset())); // Compare with frame pointer in memory. |
| z_brl(no_reserved_zone_enabling); |
| |
| // Enable reserved zone again, throw stack overflow exception. |
| call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::enable_stack_reserved_zone), Z_thread); |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_delayed_StackOverflowError)); |
| |
| should_not_reach_here(); |
| |
| bind(no_reserved_zone_enabling); |
| } |
| |
| verify_oop(Z_tos, state); |
| verify_thread(); |
| |
| pop_interpreter_frame(return_pc, Z_ARG2, Z_ARG3); |
| BLOCK_COMMENT("} remove_activation"); |
| } |
| |
| // lock object |
| // |
| // Registers alive |
| // monitor - Address of the BasicObjectLock to be used for locking, |
| // which must be initialized with the object to lock. |
| // object - Address of the object to be locked. |
| void InterpreterMacroAssembler::lock_object(Register monitor, Register object) { |
| |
| if (UseHeavyMonitors) { |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), |
| monitor, /*check_for_exceptions=*/false); |
| return; |
| } |
| |
| // template code: |
| // |
| // markOop displaced_header = obj->mark().set_unlocked(); |
| // monitor->lock()->set_displaced_header(displaced_header); |
| // if (Atomic::cmpxchg_ptr(/*ex=*/monitor, /*addr*/obj->mark_addr(), /*cmp*/displaced_header) == displaced_header) { |
| // // We stored the monitor address into the object's mark word. |
| // } else if (THREAD->is_lock_owned((address)displaced_header)) |
| // // Simple recursive case. |
| // monitor->lock()->set_displaced_header(NULL); |
| // } else { |
| // // Slow path. |
| // InterpreterRuntime::monitorenter(THREAD, monitor); |
| // } |
| |
| const Register displaced_header = Z_ARG5; |
| const Register object_mark_addr = Z_ARG4; |
| const Register current_header = Z_ARG5; |
| |
| NearLabel done; |
| NearLabel slow_case; |
| |
| // markOop displaced_header = obj->mark().set_unlocked(); |
| |
| // Load markOop from object into displaced_header. |
| z_lg(displaced_header, oopDesc::mark_offset_in_bytes(), object); |
| |
| if (UseBiasedLocking) { |
| biased_locking_enter(object, displaced_header, Z_R1, Z_R0, done, &slow_case); |
| } |
| |
| // Set displaced_header to be (markOop of object | UNLOCK_VALUE). |
| z_oill(displaced_header, markOopDesc::unlocked_value); |
| |
| // monitor->lock()->set_displaced_header(displaced_header); |
| |
| // Initialize the box (Must happen before we update the object mark!). |
| z_stg(displaced_header, BasicObjectLock::lock_offset_in_bytes() + |
| BasicLock::displaced_header_offset_in_bytes(), monitor); |
| |
| // if (Atomic::cmpxchg_ptr(/*ex=*/monitor, /*addr*/obj->mark_addr(), /*cmp*/displaced_header) == displaced_header) { |
| |
| // Store stack address of the BasicObjectLock (this is monitor) into object. |
| add2reg(object_mark_addr, oopDesc::mark_offset_in_bytes(), object); |
| |
| z_csg(displaced_header, monitor, 0, object_mark_addr); |
| assert(current_header==displaced_header, "must be same register"); // Identified two registers from z/Architecture. |
| |
| z_bre(done); |
| |
| // } else if (THREAD->is_lock_owned((address)displaced_header)) |
| // // Simple recursive case. |
| // monitor->lock()->set_displaced_header(NULL); |
| |
| // We did not see an unlocked object so try the fast recursive case. |
| |
| // Check if owner is self by comparing the value in the markOop of object |
| // (current_header) with the stack pointer. |
| z_sgr(current_header, Z_SP); |
| |
| assert(os::vm_page_size() > 0xfff, "page size too small - change the constant"); |
| |
| // The prior sequence "LGR, NGR, LTGR" can be done better |
| // (Z_R1 is temp and not used after here). |
| load_const_optimized(Z_R0, (~(os::vm_page_size()-1) | markOopDesc::lock_mask_in_place)); |
| z_ngr(Z_R0, current_header); // AND sets CC (result eq/ne 0) |
| |
| // If condition is true we are done and hence we can store 0 in the displaced |
| // header indicating it is a recursive lock and be done. |
| z_brne(slow_case); |
| z_release(); // Membar unnecessary on zarch AND because the above csg does a sync before and after. |
| z_stg(Z_R0/*==0!*/, BasicObjectLock::lock_offset_in_bytes() + |
| BasicLock::displaced_header_offset_in_bytes(), monitor); |
| z_bru(done); |
| |
| // } else { |
| // // Slow path. |
| // InterpreterRuntime::monitorenter(THREAD, monitor); |
| |
| // None of the above fast optimizations worked so we have to get into the |
| // slow case of monitor enter. |
| bind(slow_case); |
| |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), |
| monitor, /*check_for_exceptions=*/false); |
| |
| // } |
| |
| bind(done); |
| } |
| |
| // Unlocks an object. Used in monitorexit bytecode and remove_activation. |
| // |
| // Registers alive |
| // monitor - address of the BasicObjectLock to be used for locking, |
| // which must be initialized with the object to lock. |
| // |
| // Throw IllegalMonitorException if object is not locked by current thread. |
| void InterpreterMacroAssembler::unlock_object(Register monitor, Register object) { |
| |
| if (UseHeavyMonitors) { |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), |
| monitor, /*check_for_exceptions=*/ true); |
| return; |
| } |
| |
| // else { |
| // template code: |
| // |
| // if ((displaced_header = monitor->displaced_header()) == NULL) { |
| // // Recursive unlock. Mark the monitor unlocked by setting the object field to NULL. |
| // monitor->set_obj(NULL); |
| // } else if (Atomic::cmpxchg_ptr(displaced_header, obj->mark_addr(), monitor) == monitor) { |
| // // We swapped the unlocked mark in displaced_header into the object's mark word. |
| // monitor->set_obj(NULL); |
| // } else { |
| // // Slow path. |
| // InterpreterRuntime::monitorexit(THREAD, monitor); |
| // } |
| |
| const Register displaced_header = Z_ARG4; |
| const Register current_header = Z_R1; |
| Address obj_entry(monitor, BasicObjectLock::obj_offset_in_bytes()); |
| Label done; |
| |
| if (object == noreg) { |
| // In the template interpreter, we must assure that the object |
| // entry in the monitor is cleared on all paths. Thus we move |
| // loading up to here, and clear the entry afterwards. |
| object = Z_ARG3; // Use Z_ARG3 if caller didn't pass object. |
| z_lg(object, obj_entry); |
| } |
| |
| assert_different_registers(monitor, object, displaced_header, current_header); |
| |
| // if ((displaced_header = monitor->displaced_header()) == NULL) { |
| // // Recursive unlock. Mark the monitor unlocked by setting the object field to NULL. |
| // monitor->set_obj(NULL); |
| |
| clear_mem(obj_entry, sizeof(oop)); |
| |
| if (UseBiasedLocking) { |
| // The object address from the monitor is in object. |
| assert(oopDesc::mark_offset_in_bytes() == 0, "offset of _mark is not 0"); |
| biased_locking_exit(object, displaced_header, done); |
| } |
| |
| // Test first if we are in the fast recursive case. |
| MacroAssembler::load_and_test_long(displaced_header, |
| Address(monitor, BasicObjectLock::lock_offset_in_bytes() + |
| BasicLock::displaced_header_offset_in_bytes())); |
| z_bre(done); // displaced_header == 0 -> goto done |
| |
| // } else if (Atomic::cmpxchg_ptr(displaced_header, obj->mark_addr(), monitor) == monitor) { |
| // // We swapped the unlocked mark in displaced_header into the object's mark word. |
| // monitor->set_obj(NULL); |
| |
| // If we still have a lightweight lock, unlock the object and be done. |
| |
| // The markword is expected to be at offset 0. |
| assert(oopDesc::mark_offset_in_bytes() == 0, "unlock_object: review code below"); |
| |
| // We have the displaced header in displaced_header. If the lock is still |
| // lightweight, it will contain the monitor address and we'll store the |
| // displaced header back into the object's mark word. |
| z_lgr(current_header, monitor); |
| z_csg(current_header, displaced_header, 0, object); |
| z_bre(done); |
| |
| // } else { |
| // // Slow path. |
| // InterpreterRuntime::monitorexit(THREAD, monitor); |
| |
| // The lock has been converted into a heavy lock and hence |
| // we need to get into the slow case. |
| z_stg(object, obj_entry); // Restore object entry, has been cleared above. |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), |
| monitor, /*check_for_exceptions=*/false); |
| |
| // } |
| |
| bind(done); |
| } |
| |
| void InterpreterMacroAssembler::test_method_data_pointer(Register mdp, Label& zero_continue) { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| load_and_test_long(mdp, Address(Z_fp, _z_ijava_state_neg(mdx))); |
| z_brz(zero_continue); |
| } |
| |
| // Set the method data pointer for the current bcp. |
| void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| Label set_mdp; |
| Register mdp = Z_ARG4; |
| Register method = Z_ARG5; |
| |
| get_method(method); |
| // Test MDO to avoid the call if it is NULL. |
| load_and_test_long(mdp, method2_(method, method_data)); |
| z_brz(set_mdp); |
| |
| call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), method, Z_bcp); |
| // Z_RET: mdi |
| // Mdo is guaranteed to be non-zero here, we checked for it before the call. |
| assert(method->is_nonvolatile(), "choose nonvolatile reg or reload from frame"); |
| z_lg(mdp, method2_(method, method_data)); // Must reload, mdp is volatile reg. |
| add2reg_with_index(mdp, in_bytes(MethodData::data_offset()), Z_RET, mdp); |
| |
| bind(set_mdp); |
| save_mdp(mdp); |
| } |
| |
| void InterpreterMacroAssembler::verify_method_data_pointer() { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| #ifdef ASSERT |
| NearLabel verify_continue; |
| Register bcp_expected = Z_ARG3; |
| Register mdp = Z_ARG4; |
| Register method = Z_ARG5; |
| |
| test_method_data_pointer(mdp, verify_continue); // If mdp is zero, continue |
| get_method(method); |
| |
| // If the mdp is valid, it will point to a DataLayout header which is |
| // consistent with the bcp. The converse is highly probable also. |
| load_sized_value(bcp_expected, Address(mdp, DataLayout::bci_offset()), 2, false /*signed*/); |
| z_ag(bcp_expected, Address(method, Method::const_offset())); |
| load_address(bcp_expected, Address(bcp_expected, ConstMethod::codes_offset())); |
| compareU64_and_branch(bcp_expected, Z_bcp, bcondEqual, verify_continue); |
| call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp), method, Z_bcp, mdp); |
| bind(verify_continue); |
| #endif // ASSERT |
| } |
| |
| void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in, int constant, Register value) { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| z_stg(value, constant, mdp_in); |
| } |
| |
| void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, |
| int constant, |
| Register tmp, |
| bool decrement) { |
| assert_different_registers(mdp_in, tmp); |
| // counter address |
| Address data(mdp_in, constant); |
| const int delta = decrement ? -DataLayout::counter_increment : DataLayout::counter_increment; |
| add2mem_64(Address(mdp_in, constant), delta, tmp); |
| } |
| |
| void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in, |
| int flag_byte_constant) { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| // Set the flag. |
| z_oi(Address(mdp_in, DataLayout::flags_offset()), flag_byte_constant); |
| } |
| |
| void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in, |
| int offset, |
| Register value, |
| Register test_value_out, |
| Label& not_equal_continue) { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| if (test_value_out == noreg) { |
| z_cg(value, Address(mdp_in, offset)); |
| z_brne(not_equal_continue); |
| } else { |
| // Put the test value into a register, so caller can use it: |
| z_lg(test_value_out, Address(mdp_in, offset)); |
| compareU64_and_branch(test_value_out, value, bcondNotEqual, not_equal_continue); |
| } |
| } |
| |
| void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, int offset_of_disp) { |
| update_mdp_by_offset(mdp_in, noreg, offset_of_disp); |
| } |
| |
| void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, |
| Register dataidx, |
| int offset_of_disp) { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| Address disp_address(mdp_in, dataidx, offset_of_disp); |
| Assembler::z_ag(mdp_in, disp_address); |
| save_mdp(mdp_in); |
| } |
| |
| void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in, int constant) { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| add2reg(mdp_in, constant); |
| save_mdp(mdp_in); |
| } |
| |
| void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) { |
| assert(ProfileInterpreter, "must be profiling interpreter"); |
| assert(return_bci->is_nonvolatile(), "choose nonvolatile reg or save/restore"); |
| call_VM(noreg, |
| CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret), |
| return_bci); |
| } |
| |
| void InterpreterMacroAssembler::profile_taken_branch(Register mdp, Register bumped_count) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| // Otherwise, assign to mdp. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // We are taking a branch. Increment the taken count. |
| // We inline increment_mdp_data_at to return bumped_count in a register |
| //increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset())); |
| Address data(mdp, JumpData::taken_offset()); |
| z_lg(bumped_count, data); |
| // 64-bit overflow is very unlikely. Saturation to 32-bit values is |
| // performed when reading the counts. |
| add2reg(bumped_count, DataLayout::counter_increment); |
| z_stg(bumped_count, data); // Store back out |
| |
| // The method data pointer needs to be updated to reflect the new target. |
| update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset())); |
| bind(profile_continue); |
| } |
| } |
| |
| // Kills Z_R1_scratch. |
| void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // We are taking a branch. Increment the not taken count. |
| increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset()), Z_R1_scratch); |
| |
| // The method data pointer needs to be updated to correspond to |
| // the next bytecode. |
| update_mdp_by_constant(mdp, in_bytes(BranchData::branch_data_size())); |
| bind(profile_continue); |
| } |
| } |
| |
| // Kills: Z_R1_scratch. |
| void InterpreterMacroAssembler::profile_call(Register mdp) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // We are making a call. Increment the count. |
| increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); |
| |
| // The method data pointer needs to be updated to reflect the new target. |
| update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size())); |
| bind(profile_continue); |
| } |
| } |
| |
| void InterpreterMacroAssembler::profile_final_call(Register mdp) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // We are making a call. Increment the count. |
| increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); |
| |
| // The method data pointer needs to be updated to reflect the new target. |
| update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size())); |
| bind(profile_continue); |
| } |
| } |
| |
| void InterpreterMacroAssembler::profile_virtual_call(Register receiver, |
| Register mdp, |
| Register reg2, |
| bool receiver_can_be_null) { |
| if (ProfileInterpreter) { |
| NearLabel profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| NearLabel skip_receiver_profile; |
| if (receiver_can_be_null) { |
| NearLabel not_null; |
| compareU64_and_branch(receiver, (intptr_t)0L, bcondNotEqual, not_null); |
| // We are making a call. Increment the count for null receiver. |
| increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); |
| z_bru(skip_receiver_profile); |
| bind(not_null); |
| } |
| |
| // Record the receiver type. |
| record_klass_in_profile(receiver, mdp, reg2, true); |
| bind(skip_receiver_profile); |
| |
| // The method data pointer needs to be updated to reflect the new target. |
| update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size())); |
| bind(profile_continue); |
| } |
| } |
| |
| // This routine creates a state machine for updating the multi-row |
| // type profile at a virtual call site (or other type-sensitive bytecode). |
| // The machine visits each row (of receiver/count) until the receiver type |
| // is found, or until it runs out of rows. At the same time, it remembers |
| // the location of the first empty row. (An empty row records null for its |
| // receiver, and can be allocated for a newly-observed receiver type.) |
| // Because there are two degrees of freedom in the state, a simple linear |
| // search will not work; it must be a decision tree. Hence this helper |
| // function is recursive, to generate the required tree structured code. |
| // It's the interpreter, so we are trading off code space for speed. |
| // See below for example code. |
| void InterpreterMacroAssembler::record_klass_in_profile_helper( |
| Register receiver, Register mdp, |
| Register reg2, int start_row, |
| Label& done, bool is_virtual_call) { |
| if (TypeProfileWidth == 0) { |
| if (is_virtual_call) { |
| increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); |
| } |
| return; |
| } |
| |
| int last_row = VirtualCallData::row_limit() - 1; |
| assert(start_row <= last_row, "must be work left to do"); |
| // Test this row for both the receiver and for null. |
| // Take any of three different outcomes: |
| // 1. found receiver => increment count and goto done |
| // 2. found null => keep looking for case 1, maybe allocate this cell |
| // 3. found something else => keep looking for cases 1 and 2 |
| // Case 3 is handled by a recursive call. |
| for (int row = start_row; row <= last_row; row++) { |
| NearLabel next_test; |
| bool test_for_null_also = (row == start_row); |
| |
| // See if the receiver is receiver[n]. |
| int recvr_offset = in_bytes(VirtualCallData::receiver_offset(row)); |
| test_mdp_data_at(mdp, recvr_offset, receiver, |
| (test_for_null_also ? reg2 : noreg), |
| next_test); |
| // (Reg2 now contains the receiver from the CallData.) |
| |
| // The receiver is receiver[n]. Increment count[n]. |
| int count_offset = in_bytes(VirtualCallData::receiver_count_offset(row)); |
| increment_mdp_data_at(mdp, count_offset); |
| z_bru(done); |
| bind(next_test); |
| |
| if (test_for_null_also) { |
| Label found_null; |
| // Failed the equality check on receiver[n]... Test for null. |
| z_ltgr(reg2, reg2); |
| if (start_row == last_row) { |
| // The only thing left to do is handle the null case. |
| if (is_virtual_call) { |
| z_brz(found_null); |
| // Receiver did not match any saved receiver and there is no empty row for it. |
| // Increment total counter to indicate polymorphic case. |
| increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); |
| z_bru(done); |
| bind(found_null); |
| } else { |
| z_brnz(done); |
| } |
| break; |
| } |
| // Since null is rare, make it be the branch-taken case. |
| z_brz(found_null); |
| |
| // Put all the "Case 3" tests here. |
| record_klass_in_profile_helper(receiver, mdp, reg2, start_row + 1, done, is_virtual_call); |
| |
| // Found a null. Keep searching for a matching receiver, |
| // but remember that this is an empty (unused) slot. |
| bind(found_null); |
| } |
| } |
| |
| // In the fall-through case, we found no matching receiver, but we |
| // observed the receiver[start_row] is NULL. |
| |
| // Fill in the receiver field and increment the count. |
| int recvr_offset = in_bytes(VirtualCallData::receiver_offset(start_row)); |
| set_mdp_data_at(mdp, recvr_offset, receiver); |
| int count_offset = in_bytes(VirtualCallData::receiver_count_offset(start_row)); |
| load_const_optimized(reg2, DataLayout::counter_increment); |
| set_mdp_data_at(mdp, count_offset, reg2); |
| if (start_row > 0) { |
| z_bru(done); |
| } |
| } |
| |
| // Example state machine code for three profile rows: |
| // // main copy of decision tree, rooted at row[1] |
| // if (row[0].rec == rec) { row[0].incr(); goto done; } |
| // if (row[0].rec != NULL) { |
| // // inner copy of decision tree, rooted at row[1] |
| // if (row[1].rec == rec) { row[1].incr(); goto done; } |
| // if (row[1].rec != NULL) { |
| // // degenerate decision tree, rooted at row[2] |
| // if (row[2].rec == rec) { row[2].incr(); goto done; } |
| // if (row[2].rec != NULL) { count.incr(); goto done; } // overflow |
| // row[2].init(rec); goto done; |
| // } else { |
| // // remember row[1] is empty |
| // if (row[2].rec == rec) { row[2].incr(); goto done; } |
| // row[1].init(rec); goto done; |
| // } |
| // } else { |
| // // remember row[0] is empty |
| // if (row[1].rec == rec) { row[1].incr(); goto done; } |
| // if (row[2].rec == rec) { row[2].incr(); goto done; } |
| // row[0].init(rec); goto done; |
| // } |
| // done: |
| |
| void InterpreterMacroAssembler::record_klass_in_profile(Register receiver, |
| Register mdp, Register reg2, |
| bool is_virtual_call) { |
| assert(ProfileInterpreter, "must be profiling"); |
| Label done; |
| |
| record_klass_in_profile_helper(receiver, mdp, reg2, 0, done, is_virtual_call); |
| |
| bind (done); |
| } |
| |
| void InterpreterMacroAssembler::profile_ret(Register return_bci, Register mdp) { |
| if (ProfileInterpreter) { |
| NearLabel profile_continue; |
| uint row; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // Update the total ret count. |
| increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); |
| |
| for (row = 0; row < RetData::row_limit(); row++) { |
| NearLabel next_test; |
| |
| // See if return_bci is equal to bci[n]: |
| test_mdp_data_at(mdp, |
| in_bytes(RetData::bci_offset(row)), |
| return_bci, noreg, |
| next_test); |
| |
| // Return_bci is equal to bci[n]. Increment the count. |
| increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row))); |
| |
| // The method data pointer needs to be updated to reflect the new target. |
| update_mdp_by_offset(mdp, in_bytes(RetData::bci_displacement_offset(row))); |
| z_bru(profile_continue); |
| bind(next_test); |
| } |
| |
| update_mdp_for_ret(return_bci); |
| |
| bind(profile_continue); |
| } |
| } |
| |
| void InterpreterMacroAssembler::profile_null_seen(Register mdp) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| set_mdp_flag_at(mdp, BitData::null_seen_byte_constant()); |
| |
| // The method data pointer needs to be updated. |
| int mdp_delta = in_bytes(BitData::bit_data_size()); |
| if (TypeProfileCasts) { |
| mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); |
| } |
| update_mdp_by_constant(mdp, mdp_delta); |
| |
| bind(profile_continue); |
| } |
| } |
| |
| void InterpreterMacroAssembler::profile_typecheck_failed(Register mdp, Register tmp) { |
| if (ProfileInterpreter && TypeProfileCasts) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| int count_offset = in_bytes(CounterData::count_offset()); |
| // Back up the address, since we have already bumped the mdp. |
| count_offset -= in_bytes(VirtualCallData::virtual_call_data_size()); |
| |
| // *Decrement* the counter. We expect to see zero or small negatives. |
| increment_mdp_data_at(mdp, count_offset, tmp, true); |
| |
| bind (profile_continue); |
| } |
| } |
| |
| void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass, Register reg2) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // The method data pointer needs to be updated. |
| int mdp_delta = in_bytes(BitData::bit_data_size()); |
| if (TypeProfileCasts) { |
| mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); |
| |
| // Record the object type. |
| record_klass_in_profile(klass, mdp, reg2, false); |
| } |
| update_mdp_by_constant(mdp, mdp_delta); |
| |
| bind(profile_continue); |
| } |
| } |
| |
| void InterpreterMacroAssembler::profile_switch_default(Register mdp) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // Update the default case count. |
| increment_mdp_data_at(mdp, in_bytes(MultiBranchData::default_count_offset())); |
| |
| // The method data pointer needs to be updated. |
| update_mdp_by_offset(mdp, in_bytes(MultiBranchData::default_displacement_offset())); |
| |
| bind(profile_continue); |
| } |
| } |
| |
| // Kills: index, scratch1, scratch2. |
| void InterpreterMacroAssembler::profile_switch_case(Register index, |
| Register mdp, |
| Register scratch1, |
| Register scratch2) { |
| if (ProfileInterpreter) { |
| Label profile_continue; |
| assert_different_registers(index, mdp, scratch1, scratch2); |
| |
| // If no method data exists, go to profile_continue. |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // Build the base (index * per_case_size_in_bytes()) + |
| // case_array_offset_in_bytes(). |
| z_sllg(index, index, exact_log2(in_bytes(MultiBranchData::per_case_size()))); |
| add2reg(index, in_bytes(MultiBranchData::case_array_offset())); |
| |
| // Add the calculated base to the mdp -> address of the case' data. |
| Address case_data_addr(mdp, index); |
| Register case_data = scratch1; |
| load_address(case_data, case_data_addr); |
| |
| // Update the case count. |
| increment_mdp_data_at(case_data, |
| in_bytes(MultiBranchData::relative_count_offset()), |
| scratch2); |
| |
| // The method data pointer needs to be updated. |
| update_mdp_by_offset(mdp, |
| index, |
| in_bytes(MultiBranchData::relative_displacement_offset())); |
| |
| bind(profile_continue); |
| } |
| } |
| |
| // kills: R0, R1, flags, loads klass from obj (if not null) |
| void InterpreterMacroAssembler::profile_obj_type(Register obj, Address mdo_addr, Register klass, bool cmp_done) { |
| NearLabel null_seen, init_klass, do_nothing, do_update; |
| |
| // Klass = obj is allowed. |
| const Register tmp = Z_R1; |
| assert_different_registers(obj, mdo_addr.base(), tmp, Z_R0); |
| assert_different_registers(klass, mdo_addr.base(), tmp, Z_R0); |
| |
| z_lg(tmp, mdo_addr); |
| if (cmp_done) { |
| z_brz(null_seen); |
| } else { |
| compareU64_and_branch(obj, (intptr_t)0, Assembler::bcondEqual, null_seen); |
| } |
| |
| verify_oop(obj); |
| load_klass(klass, obj); |
| |
| // Klass seen before, nothing to do (regardless of unknown bit). |
| z_lgr(Z_R0, tmp); |
| assert(Immediate::is_uimm(~TypeEntries::type_klass_mask, 16), "or change following instruction"); |
| z_nill(Z_R0, TypeEntries::type_klass_mask & 0xFFFF); |
| compareU64_and_branch(Z_R0, klass, Assembler::bcondEqual, do_nothing); |
| |
| // Already unknown. Nothing to do anymore. |
| z_tmll(tmp, TypeEntries::type_unknown); |
| z_brc(Assembler::bcondAllOne, do_nothing); |
| |
| z_lgr(Z_R0, tmp); |
| assert(Immediate::is_uimm(~TypeEntries::type_mask, 16), "or change following instruction"); |
| z_nill(Z_R0, TypeEntries::type_mask & 0xFFFF); |
| compareU64_and_branch(Z_R0, (intptr_t)0, Assembler::bcondEqual, init_klass); |
| |
| // Different than before. Cannot keep accurate profile. |
| z_oill(tmp, TypeEntries::type_unknown); |
| z_bru(do_update); |
| |
| bind(init_klass); |
| // Combine klass and null_seen bit (only used if (tmp & type_mask)==0). |
| z_ogr(tmp, klass); |
| z_bru(do_update); |
| |
| bind(null_seen); |
| // Set null_seen if obj is 0. |
| z_oill(tmp, TypeEntries::null_seen); |
| // fallthru: z_bru(do_update); |
| |
| bind(do_update); |
| z_stg(tmp, mdo_addr); |
| |
| bind(do_nothing); |
| } |
| |
| void InterpreterMacroAssembler::profile_arguments_type(Register mdp, Register callee, Register tmp, bool is_virtual) { |
| if (!ProfileInterpreter) { |
| return; |
| } |
| |
| assert_different_registers(mdp, callee, tmp); |
| |
| if (MethodData::profile_arguments() || MethodData::profile_return()) { |
| Label profile_continue; |
| |
| test_method_data_pointer(mdp, profile_continue); |
| |
| int off_to_start = is_virtual ? in_bytes(VirtualCallData::virtual_call_data_size()) : in_bytes(CounterData::counter_data_size()); |
| |
| z_cliy(in_bytes(DataLayout::tag_offset()) - off_to_start, mdp, |
| is_virtual ? DataLayout::virtual_call_type_data_tag : DataLayout::call_type_data_tag); |
| z_brne(profile_continue); |
| |
| if (MethodData::profile_arguments()) { |
| NearLabel done; |
| int off_to_args = in_bytes(TypeEntriesAtCall::args_data_offset()); |
| add2reg(mdp, off_to_args); |
| |
| for (int i = 0; i < TypeProfileArgsLimit; i++) { |
| if (i > 0 || MethodData::profile_return()) { |
| // If return value type is profiled we may have no argument to profile. |
| z_lg(tmp, in_bytes(TypeEntriesAtCall::cell_count_offset())-off_to_args, mdp); |
| add2reg(tmp, -i*TypeStackSlotEntries::per_arg_count()); |
| compare64_and_branch(tmp, TypeStackSlotEntries::per_arg_count(), Assembler::bcondLow, done); |
| } |
| z_lg(tmp, Address(callee, Method::const_offset())); |
| z_lgh(tmp, Address(tmp, ConstMethod::size_of_parameters_offset())); |
| // Stack offset o (zero based) from the start of the argument |
| // list. For n arguments translates into offset n - o - 1 from |
| // the end of the argument list. But there is an extra slot at |
| // the top of the stack. So the offset is n - o from Lesp. |
| z_sg(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::stack_slot_offset(i))-off_to_args)); |
| z_sllg(tmp, tmp, Interpreter::logStackElementSize); |
| Address stack_slot_addr(tmp, Z_esp); |
| z_ltg(tmp, stack_slot_addr); |
| |
| Address mdo_arg_addr(mdp, in_bytes(TypeEntriesAtCall::argument_type_offset(i))-off_to_args); |
| profile_obj_type(tmp, mdo_arg_addr, tmp, /*ltg did compare to 0*/ true); |
| |
| int to_add = in_bytes(TypeStackSlotEntries::per_arg_size()); |
| add2reg(mdp, to_add); |
| off_to_args += to_add; |
| } |
| |
| if (MethodData::profile_return()) { |
| z_lg(tmp, in_bytes(TypeEntriesAtCall::cell_count_offset())-off_to_args, mdp); |
| add2reg(tmp, -TypeProfileArgsLimit*TypeStackSlotEntries::per_arg_count()); |
| } |
| |
| bind(done); |
| |
| if (MethodData::profile_return()) { |
| // We're right after the type profile for the last |
| // argument. Tmp is the number of cells left in the |
| // CallTypeData/VirtualCallTypeData to reach its end. Non null |
| // if there's a return to profile. |
| assert(ReturnTypeEntry::static_cell_count() < TypeStackSlotEntries::per_arg_count(), "can't move past ret type"); |
| z_sllg(tmp, tmp, exact_log2(DataLayout::cell_size)); |
| z_agr(mdp, tmp); |
| } |
| z_stg(mdp, _z_ijava_state_neg(mdx), Z_fp); |
| } else { |
| assert(MethodData::profile_return(), "either profile call args or call ret"); |
| update_mdp_by_constant(mdp, in_bytes(TypeEntriesAtCall::return_only_size())); |
| } |
| |
| // Mdp points right after the end of the |
| // CallTypeData/VirtualCallTypeData, right after the cells for the |
| // return value type if there's one. |
| bind(profile_continue); |
| } |
| } |
| |
| void InterpreterMacroAssembler::profile_return_type(Register mdp, Register ret, Register tmp) { |
| assert_different_registers(mdp, ret, tmp); |
| if (ProfileInterpreter && MethodData::profile_return()) { |
| Label profile_continue; |
| |
| test_method_data_pointer(mdp, profile_continue); |
| |
| if (MethodData::profile_return_jsr292_only()) { |
| // If we don't profile all invoke bytecodes we must make sure |
| // it's a bytecode we indeed profile. We can't go back to the |
| // beginning of the ProfileData we intend to update to check its |
| // type because we're right after it and we don't known its |
| // length. |
| NearLabel do_profile; |
| Address bc(Z_bcp); |
| z_lb(tmp, bc); |
| compare32_and_branch(tmp, Bytecodes::_invokedynamic, Assembler::bcondEqual, do_profile); |
| compare32_and_branch(tmp, Bytecodes::_invokehandle, Assembler::bcondEqual, do_profile); |
| get_method(tmp); |
| // Supplement to 8139891: _intrinsic_id exceeded 1-byte size limit. |
| if (Method::intrinsic_id_size_in_bytes() == 1) { |
| z_cli(Method::intrinsic_id_offset_in_bytes(), tmp, vmIntrinsics::_compiledLambdaForm); |
| } else { |
| assert(Method::intrinsic_id_size_in_bytes() == 2, "size error: check Method::_intrinsic_id"); |
| z_lh(tmp, Method::intrinsic_id_offset_in_bytes(), Z_R0, tmp); |
| z_chi(tmp, vmIntrinsics::_compiledLambdaForm); |
| } |
| z_brne(profile_continue); |
| |
| bind(do_profile); |
| } |
| |
| Address mdo_ret_addr(mdp, -in_bytes(ReturnTypeEntry::size())); |
| profile_obj_type(ret, mdo_ret_addr, tmp); |
| |
| bind(profile_continue); |
| } |
| } |
| |
| void InterpreterMacroAssembler::profile_parameters_type(Register mdp, Register tmp1, Register tmp2) { |
| if (ProfileInterpreter && MethodData::profile_parameters()) { |
| Label profile_continue, done; |
| |
| test_method_data_pointer(mdp, profile_continue); |
| |
| // Load the offset of the area within the MDO used for |
| // parameters. If it's negative we're not profiling any parameters. |
| Address parm_di_addr(mdp, in_bytes(MethodData::parameters_type_data_di_offset()) - in_bytes(MethodData::data_offset())); |
| load_and_test_int2long(tmp1, parm_di_addr); |
| z_brl(profile_continue); |
| |
| // Compute a pointer to the area for parameters from the offset |
| // and move the pointer to the slot for the last |
| // parameters. Collect profiling from last parameter down. |
| // mdo start + parameters offset + array length - 1 |
| |
| // Pointer to the parameter area in the MDO. |
| z_agr(mdp, tmp1); |
| |
| // Offset of the current profile entry to update. |
| const Register entry_offset = tmp1; |
| // entry_offset = array len in number of cells. |
| z_lg(entry_offset, Address(mdp, ArrayData::array_len_offset())); |
| // entry_offset (number of cells) = array len - size of 1 entry |
| add2reg(entry_offset, -TypeStackSlotEntries::per_arg_count()); |
| // entry_offset in bytes |
| z_sllg(entry_offset, entry_offset, exact_log2(DataLayout::cell_size)); |
| |
| Label loop; |
| bind(loop); |
| |
| Address arg_off(mdp, entry_offset, ParametersTypeData::stack_slot_offset(0)); |
| Address arg_type(mdp, entry_offset, ParametersTypeData::type_offset(0)); |
| |
| // Load offset on the stack from the slot for this parameter. |
| z_lg(tmp2, arg_off); |
| z_sllg(tmp2, tmp2, Interpreter::logStackElementSize); |
| z_lcgr(tmp2); // Negate. |
| |
| // Profile the parameter. |
| z_ltg(tmp2, Address(Z_locals, tmp2)); |
| profile_obj_type(tmp2, arg_type, tmp2, /*ltg did compare to 0*/ true); |
| |
| // Go to next parameter. |
| z_aghi(entry_offset, -TypeStackSlotEntries::per_arg_count() * DataLayout::cell_size); |
| z_brnl(loop); |
| |
| bind(profile_continue); |
| } |
| } |
| |
| // Jump if ((*counter_addr += increment) & mask) satisfies the condition. |
| void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr, |
| int increment, |
| Address mask, |
| Register scratch, |
| bool preloaded, |
| branch_condition cond, |
| Label *where) { |
| assert_different_registers(counter_addr.base(), scratch); |
| if (preloaded) { |
| add2reg(scratch, increment); |
| reg2mem_opt(scratch, counter_addr, false); |
| } else { |
| if (VM_Version::has_MemWithImmALUOps() && Immediate::is_simm8(increment) && counter_addr.is_RSYform()) { |
| z_alsi(counter_addr.disp20(), counter_addr.base(), increment); |
| mem2reg_signed_opt(scratch, counter_addr); |
| } else { |
| mem2reg_signed_opt(scratch, counter_addr); |
| add2reg(scratch, increment); |
| reg2mem_opt(scratch, counter_addr, false); |
| } |
| } |
| z_n(scratch, mask); |
| if (where) { z_brc(cond, *where); } |
| } |
| |
| // Get MethodCounters object for given method. Lazily allocated if necessary. |
| // method - Ptr to Method object. |
| // Rcounters - Ptr to MethodCounters object associated with Method object. |
| // skip - Exit point if MethodCounters object can't be created (OOM condition). |
| void InterpreterMacroAssembler::get_method_counters(Register Rmethod, |
| Register Rcounters, |
| Label& skip) { |
| assert_different_registers(Rmethod, Rcounters); |
| |
| BLOCK_COMMENT("get MethodCounters object {"); |
| |
| Label has_counters; |
| load_and_test_long(Rcounters, Address(Rmethod, Method::method_counters_offset())); |
| z_brnz(has_counters); |
| |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::build_method_counters), Rmethod, false); |
| z_ltgr(Rcounters, Z_RET); // Runtime call returns MethodCounters object. |
| z_brz(skip); // No MethodCounters, out of memory. |
| |
| bind(has_counters); |
| |
| BLOCK_COMMENT("} get MethodCounters object"); |
| } |
| |
| // Increment invocation counter in MethodCounters object. |
| // Return (invocation_counter+backedge_counter) as "result" in RctrSum. |
| // Counter values are all unsigned. |
| void InterpreterMacroAssembler::increment_invocation_counter(Register Rcounters, Register RctrSum) { |
| assert(UseCompiler || LogTouchedMethods, "incrementing must be useful"); |
| assert_different_registers(Rcounters, RctrSum); |
| |
| int increment = InvocationCounter::count_increment; |
| int inv_counter_offset = in_bytes(MethodCounters::invocation_counter_offset() + InvocationCounter::counter_offset()); |
| int be_counter_offset = in_bytes(MethodCounters::backedge_counter_offset() + InvocationCounter::counter_offset()); |
| |
| BLOCK_COMMENT("Increment invocation counter {"); |
| |
| if (VM_Version::has_MemWithImmALUOps() && Immediate::is_simm8(increment)) { |
| // Increment the invocation counter in place, |
| // then add the incremented value to the backedge counter. |
| z_l(RctrSum, be_counter_offset, Rcounters); |
| z_alsi(inv_counter_offset, Rcounters, increment); // Atomic increment @no extra cost! |
| z_nilf(RctrSum, InvocationCounter::count_mask_value); // Mask off state bits. |
| z_al(RctrSum, inv_counter_offset, Z_R0, Rcounters); |
| } else { |
| // This path is optimized for low register consumption |
| // at the cost of somewhat higher operand delays. |
| // It does not need an extra temp register. |
| |
| // Update the invocation counter. |
| z_l(RctrSum, inv_counter_offset, Rcounters); |
| if (RctrSum == Z_R0) { |
| z_ahi(RctrSum, increment); |
| } else { |
| add2reg(RctrSum, increment); |
| } |
| z_st(RctrSum, inv_counter_offset, Rcounters); |
| |
| // Mask off the state bits. |
| z_nilf(RctrSum, InvocationCounter::count_mask_value); |
| |
| // Add the backedge counter to the updated invocation counter to |
| // form the result. |
| z_al(RctrSum, be_counter_offset, Z_R0, Rcounters); |
| } |
| |
| BLOCK_COMMENT("} Increment invocation counter"); |
| |
| // Note that this macro must leave the backedge_count + invocation_count in Rtmp! |
| } |
| |
| |
| // increment backedge counter in MethodCounters object. |
| // return (invocation_counter+backedge_counter) as "result" in RctrSum |
| // counter values are all unsigned! |
| void InterpreterMacroAssembler::increment_backedge_counter(Register Rcounters, Register RctrSum) { |
| assert(UseCompiler, "incrementing must be useful"); |
| assert_different_registers(Rcounters, RctrSum); |
| |
| int increment = InvocationCounter::count_increment; |
| int inv_counter_offset = in_bytes(MethodCounters::invocation_counter_offset() + InvocationCounter::counter_offset()); |
| int be_counter_offset = in_bytes(MethodCounters::backedge_counter_offset() + InvocationCounter::counter_offset()); |
| |
| BLOCK_COMMENT("Increment backedge counter {"); |
| |
| if (VM_Version::has_MemWithImmALUOps() && Immediate::is_simm8(increment)) { |
| // Increment the invocation counter in place, |
| // then add the incremented value to the backedge counter. |
| z_l(RctrSum, inv_counter_offset, Rcounters); |
| z_alsi(be_counter_offset, Rcounters, increment); // Atomic increment @no extra cost! |
| z_nilf(RctrSum, InvocationCounter::count_mask_value); // Mask off state bits. |
| z_al(RctrSum, be_counter_offset, Z_R0, Rcounters); |
| } else { |
| // This path is optimized for low register consumption |
| // at the cost of somewhat higher operand delays. |
| // It does not need an extra temp register. |
| |
| // Update the invocation counter. |
| z_l(RctrSum, be_counter_offset, Rcounters); |
| if (RctrSum == Z_R0) { |
| z_ahi(RctrSum, increment); |
| } else { |
| add2reg(RctrSum, increment); |
| } |
| z_st(RctrSum, be_counter_offset, Rcounters); |
| |
| // Mask off the state bits. |
| z_nilf(RctrSum, InvocationCounter::count_mask_value); |
| |
| // Add the backedge counter to the updated invocation counter to |
| // form the result. |
| z_al(RctrSum, inv_counter_offset, Z_R0, Rcounters); |
| } |
| |
| BLOCK_COMMENT("} Increment backedge counter"); |
| |
| // Note that this macro must leave the backedge_count + invocation_count in Rtmp! |
| } |
| |
| // Add an InterpMonitorElem to stack (see frame_s390.hpp). |
| void InterpreterMacroAssembler::add_monitor_to_stack(bool stack_is_empty, |
| Register Rtemp1, |
| Register Rtemp2, |
| Register Rtemp3) { |
| |
| const Register Rcurr_slot = Rtemp1; |
| const Register Rlimit = Rtemp2; |
| const jint delta = -frame::interpreter_frame_monitor_size() * wordSize; |
| |
| assert((delta & LongAlignmentMask) == 0, |
| "sizeof BasicObjectLock must be even number of doublewords"); |
| assert(2 * wordSize == -delta, "this works only as long as delta == -2*wordSize"); |
| assert(Rcurr_slot != Z_R0, "Register must be usable as base register"); |
| assert_different_registers(Rlimit, Rcurr_slot, Rtemp3); |
| |
| get_monitors(Rlimit); |
| |
| // Adjust stack pointer for additional monitor entry. |
| resize_frame(RegisterOrConstant((intptr_t) delta), Z_fp, false); |
| |
| if (!stack_is_empty) { |
| // Must copy stack contents down. |
| NearLabel next, done; |
| |
| // Rtemp := addr(Tos), Z_esp is pointing below it! |
| add2reg(Rcurr_slot, wordSize, Z_esp); |
| |
| // Nothing to do, if already at monitor area. |
| compareU64_and_branch(Rcurr_slot, Rlimit, bcondNotLow, done); |
| |
| bind(next); |
| |
| // Move one stack slot. |
| mem2reg_opt(Rtemp3, Address(Rcurr_slot)); |
| reg2mem_opt(Rtemp3, Address(Rcurr_slot, delta)); |
| add2reg(Rcurr_slot, wordSize); |
| compareU64_and_branch(Rcurr_slot, Rlimit, bcondLow, next); // Are we done? |
| |
| bind(done); |
| // Done copying stack. |
| } |
| |
| // Adjust expression stack and monitor pointers. |
| add2reg(Z_esp, delta); |
| add2reg(Rlimit, delta); |
| save_monitors(Rlimit); |
| } |
| |
| // Note: Index holds the offset in bytes afterwards. |
| // You can use this to store a new value (with Llocals as the base). |
| void InterpreterMacroAssembler::access_local_int(Register index, Register dst) { |
| z_sllg(index, index, LogBytesPerWord); |
| mem2reg_opt(dst, Address(Z_locals, index), false); |
| } |
| |
| void InterpreterMacroAssembler::verify_oop(Register reg, TosState state) { |
| if (state == atos) { MacroAssembler::verify_oop(reg); } |
| } |
| |
| // Inline assembly for: |
| // |
| // if (thread is in interp_only_mode) { |
| // InterpreterRuntime::post_method_entry(); |
| // } |
| |
| void InterpreterMacroAssembler::notify_method_entry() { |
| |
| // JVMTI |
| // Whenever JVMTI puts a thread in interp_only_mode, method |
| // entry/exit events are sent for that thread to track stack |
| // depth. If it is possible to enter interp_only_mode we add |
| // the code to check if the event should be sent. |
| if (JvmtiExport::can_post_interpreter_events()) { |
| Label jvmti_post_done; |
| MacroAssembler::load_and_test_int(Z_R0, Address(Z_thread, JavaThread::interp_only_mode_offset())); |
| z_bre(jvmti_post_done); |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_entry), /*check_exceptions=*/false); |
| bind(jvmti_post_done); |
| } |
| } |
| |
| // Inline assembly for: |
| // |
| // if (thread is in interp_only_mode) { |
| // if (!native_method) save result |
| // InterpreterRuntime::post_method_exit(); |
| // if (!native_method) restore result |
| // } |
| // if (DTraceMethodProbes) { |
| // SharedRuntime::dtrace_method_exit(thread, method); |
| // } |
| // |
| // For native methods their result is stored in z_ijava_state.lresult |
| // and z_ijava_state.fresult before coming here. |
| // Java methods have their result stored in the expression stack. |
| // |
| // Notice the dependency to frame::interpreter_frame_result(). |
| void InterpreterMacroAssembler::notify_method_exit(bool native_method, |
| TosState state, |
| NotifyMethodExitMode mode) { |
| // JVMTI |
| // Whenever JVMTI puts a thread in interp_only_mode, method |
| // entry/exit events are sent for that thread to track stack |
| // depth. If it is possible to enter interp_only_mode we add |
| // the code to check if the event should be sent. |
| if (mode == NotifyJVMTI && JvmtiExport::can_post_interpreter_events()) { |
| Label jvmti_post_done; |
| MacroAssembler::load_and_test_int(Z_R0, Address(Z_thread, JavaThread::interp_only_mode_offset())); |
| z_bre(jvmti_post_done); |
| if (!native_method) push(state); // see frame::interpreter_frame_result() |
| call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit), /*check_exceptions=*/false); |
| if (!native_method) pop(state); |
| bind(jvmti_post_done); |
| } |
| |
| #if 0 |
| // Dtrace currently not supported on z/Architecture. |
| { |
| SkipIfEqual skip(this, &DTraceMethodProbes, false); |
| push(state); |
| get_method(c_rarg1); |
| call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit), |
| r15_thread, c_rarg1); |
| pop(state); |
| } |
| #endif |
| } |
| |
| void InterpreterMacroAssembler::skip_if_jvmti_mode(Label &Lskip, Register Rscratch) { |
| if (!JvmtiExport::can_post_interpreter_events()) { |
| return; |
| } |
| |
| load_and_test_int(Rscratch, Address(Z_thread, JavaThread::interp_only_mode_offset())); |
| z_brnz(Lskip); |
| |
| } |
| |
| // Pop the topmost TOP_IJAVA_FRAME and set it's sender_sp as new Z_SP. |
| // The return pc is loaded into the register return_pc. |
| // |
| // Registers updated: |
| // return_pc - The return pc of the calling frame. |
| // tmp1, tmp2 - scratch |
| void InterpreterMacroAssembler::pop_interpreter_frame(Register return_pc, Register tmp1, Register tmp2) { |
| // F0 Z_SP -> caller_sp (F1's) |
| // ... |
| // sender_sp (F1's) |
| // ... |
| // F1 Z_fp -> caller_sp (F2's) |
| // return_pc (Continuation after return from F0.) |
| // ... |
| // F2 caller_sp |
| |
| // Remove F0's activation. Restoring Z_SP to sender_sp reverts modifications |
| // (a) by a c2i adapter and (b) by generate_fixed_frame(). |
| // In case (a) the new top frame F1 is an unextended compiled frame. |
| // In case (b) F1 is converted from PARENT_IJAVA_FRAME to TOP_IJAVA_FRAME. |
| |
| // Case (b) seems to be redundant when returning to a interpreted caller, |
| // because then the caller's top_frame_sp is installed as sp (see |
| // TemplateInterpreterGenerator::generate_return_entry_for ()). But |
| // pop_interpreter_frame() is also used in exception handling and there the |
| // frame type of the caller is unknown, therefore top_frame_sp cannot be used, |
| // so it is important that sender_sp is the caller's sp as TOP_IJAVA_FRAME. |
| |
| Register R_f1_sender_sp = tmp1; |
| Register R_f2_sp = tmp2; |
| |
| // Tirst check the for the interpreter frame's magic. |
| asm_assert_ijava_state_magic(R_f2_sp/*tmp*/); |
| z_lg(R_f2_sp, _z_parent_ijava_frame_abi(callers_sp), Z_fp); |
| z_lg(R_f1_sender_sp, _z_ijava_state_neg(sender_sp), Z_fp); |
| if (return_pc->is_valid()) |
| z_lg(return_pc, _z_parent_ijava_frame_abi(return_pc), Z_fp); |
| // Pop F0 by resizing to R_f1_sender_sp and using R_f2_sp as fp. |
| resize_frame_absolute(R_f1_sender_sp, R_f2_sp, false/*load fp*/); |
| |
| #ifdef ASSERT |
| // The return_pc in the new top frame is dead... at least that's my |
| // current understanding; to assert this I overwrite it. |
| load_const_optimized(Z_ARG3, 0xb00b1); |
| z_stg(Z_ARG3, _z_parent_ijava_frame_abi(return_pc), Z_SP); |
| #endif |
| } |
| |
| void InterpreterMacroAssembler::verify_FPU(int stack_depth, TosState state) { |
| if (VerifyFPU) { |
| unimplemented("verfiyFPU"); |
| } |
| } |
| |