| /* |
| * Copyright (c) 1999, 2017, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| * |
| */ |
| |
| #include "precompiled.hpp" |
| #include "asm/assembler.hpp" |
| #include "c1/c1_Defs.hpp" |
| #include "c1/c1_MacroAssembler.hpp" |
| #include "c1/c1_Runtime1.hpp" |
| #include "interpreter/interpreter.hpp" |
| #include "nativeInst_x86.hpp" |
| #include "oops/compiledICHolder.hpp" |
| #include "oops/oop.inline.hpp" |
| #include "prims/jvmtiExport.hpp" |
| #include "register_x86.hpp" |
| #include "runtime/sharedRuntime.hpp" |
| #include "runtime/signature.hpp" |
| #include "runtime/vframeArray.hpp" |
| #include "utilities/macros.hpp" |
| #include "vmreg_x86.inline.hpp" |
| #if INCLUDE_ALL_GCS |
| #include "gc/g1/g1SATBCardTableModRefBS.hpp" |
| #endif |
| |
| |
| // Implementation of StubAssembler |
| |
| int StubAssembler::call_RT(Register oop_result1, Register metadata_result, address entry, int args_size) { |
| // setup registers |
| const Register thread = NOT_LP64(rdi) LP64_ONLY(r15_thread); // is callee-saved register (Visual C++ calling conventions) |
| assert(!(oop_result1->is_valid() || metadata_result->is_valid()) || oop_result1 != metadata_result, "registers must be different"); |
| assert(oop_result1 != thread && metadata_result != thread, "registers must be different"); |
| assert(args_size >= 0, "illegal args_size"); |
| bool align_stack = false; |
| #ifdef _LP64 |
| // At a method handle call, the stack may not be properly aligned |
| // when returning with an exception. |
| align_stack = (stub_id() == Runtime1::handle_exception_from_callee_id); |
| #endif |
| |
| #ifdef _LP64 |
| mov(c_rarg0, thread); |
| set_num_rt_args(0); // Nothing on stack |
| #else |
| set_num_rt_args(1 + args_size); |
| |
| // push java thread (becomes first argument of C function) |
| get_thread(thread); |
| push(thread); |
| #endif // _LP64 |
| |
| int call_offset; |
| if (!align_stack) { |
| set_last_Java_frame(thread, noreg, rbp, NULL); |
| } else { |
| address the_pc = pc(); |
| call_offset = offset(); |
| set_last_Java_frame(thread, noreg, rbp, the_pc); |
| andptr(rsp, -(StackAlignmentInBytes)); // Align stack |
| } |
| |
| // do the call |
| call(RuntimeAddress(entry)); |
| if (!align_stack) { |
| call_offset = offset(); |
| } |
| // verify callee-saved register |
| #ifdef ASSERT |
| guarantee(thread != rax, "change this code"); |
| push(rax); |
| { Label L; |
| get_thread(rax); |
| cmpptr(thread, rax); |
| jcc(Assembler::equal, L); |
| int3(); |
| stop("StubAssembler::call_RT: rdi not callee saved?"); |
| bind(L); |
| } |
| pop(rax); |
| #endif |
| reset_last_Java_frame(thread, true); |
| |
| // discard thread and arguments |
| NOT_LP64(addptr(rsp, num_rt_args()*BytesPerWord)); |
| |
| // check for pending exceptions |
| { Label L; |
| cmpptr(Address(thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD); |
| jcc(Assembler::equal, L); |
| // exception pending => remove activation and forward to exception handler |
| movptr(rax, Address(thread, Thread::pending_exception_offset())); |
| // make sure that the vm_results are cleared |
| if (oop_result1->is_valid()) { |
| movptr(Address(thread, JavaThread::vm_result_offset()), NULL_WORD); |
| } |
| if (metadata_result->is_valid()) { |
| movptr(Address(thread, JavaThread::vm_result_2_offset()), NULL_WORD); |
| } |
| if (frame_size() == no_frame_size) { |
| leave(); |
| jump(RuntimeAddress(StubRoutines::forward_exception_entry())); |
| } else if (_stub_id == Runtime1::forward_exception_id) { |
| should_not_reach_here(); |
| } else { |
| jump(RuntimeAddress(Runtime1::entry_for(Runtime1::forward_exception_id))); |
| } |
| bind(L); |
| } |
| // get oop results if there are any and reset the values in the thread |
| if (oop_result1->is_valid()) { |
| get_vm_result(oop_result1, thread); |
| } |
| if (metadata_result->is_valid()) { |
| get_vm_result_2(metadata_result, thread); |
| } |
| return call_offset; |
| } |
| |
| |
| int StubAssembler::call_RT(Register oop_result1, Register metadata_result, address entry, Register arg1) { |
| #ifdef _LP64 |
| mov(c_rarg1, arg1); |
| #else |
| push(arg1); |
| #endif // _LP64 |
| return call_RT(oop_result1, metadata_result, entry, 1); |
| } |
| |
| |
| int StubAssembler::call_RT(Register oop_result1, Register metadata_result, address entry, Register arg1, Register arg2) { |
| #ifdef _LP64 |
| if (c_rarg1 == arg2) { |
| if (c_rarg2 == arg1) { |
| xchgq(arg1, arg2); |
| } else { |
| mov(c_rarg2, arg2); |
| mov(c_rarg1, arg1); |
| } |
| } else { |
| mov(c_rarg1, arg1); |
| mov(c_rarg2, arg2); |
| } |
| #else |
| push(arg2); |
| push(arg1); |
| #endif // _LP64 |
| return call_RT(oop_result1, metadata_result, entry, 2); |
| } |
| |
| |
| int StubAssembler::call_RT(Register oop_result1, Register metadata_result, address entry, Register arg1, Register arg2, Register arg3) { |
| #ifdef _LP64 |
| // if there is any conflict use the stack |
| if (arg1 == c_rarg2 || arg1 == c_rarg3 || |
| arg2 == c_rarg1 || arg1 == c_rarg3 || |
| arg3 == c_rarg1 || arg1 == c_rarg2) { |
| push(arg3); |
| push(arg2); |
| push(arg1); |
| pop(c_rarg1); |
| pop(c_rarg2); |
| pop(c_rarg3); |
| } else { |
| mov(c_rarg1, arg1); |
| mov(c_rarg2, arg2); |
| mov(c_rarg3, arg3); |
| } |
| #else |
| push(arg3); |
| push(arg2); |
| push(arg1); |
| #endif // _LP64 |
| return call_RT(oop_result1, metadata_result, entry, 3); |
| } |
| |
| |
| // Implementation of StubFrame |
| |
| class StubFrame: public StackObj { |
| private: |
| StubAssembler* _sasm; |
| |
| public: |
| StubFrame(StubAssembler* sasm, const char* name, bool must_gc_arguments); |
| void load_argument(int offset_in_words, Register reg); |
| |
| ~StubFrame(); |
| }; |
| |
| |
| #define __ _sasm-> |
| |
| StubFrame::StubFrame(StubAssembler* sasm, const char* name, bool must_gc_arguments) { |
| _sasm = sasm; |
| __ set_info(name, must_gc_arguments); |
| __ enter(); |
| } |
| |
| // load parameters that were stored with LIR_Assembler::store_parameter |
| // Note: offsets for store_parameter and load_argument must match |
| void StubFrame::load_argument(int offset_in_words, Register reg) { |
| // rbp, + 0: link |
| // + 1: return address |
| // + 2: argument with offset 0 |
| // + 3: argument with offset 1 |
| // + 4: ... |
| |
| __ movptr(reg, Address(rbp, (offset_in_words + 2) * BytesPerWord)); |
| } |
| |
| |
| StubFrame::~StubFrame() { |
| __ leave(); |
| __ ret(0); |
| } |
| |
| #undef __ |
| |
| |
| // Implementation of Runtime1 |
| |
| #define __ sasm-> |
| |
| const int float_regs_as_doubles_size_in_slots = pd_nof_fpu_regs_frame_map * 2; |
| const int xmm_regs_as_doubles_size_in_slots = FrameMap::nof_xmm_regs * 2; |
| |
| // Stack layout for saving/restoring all the registers needed during a runtime |
| // call (this includes deoptimization) |
| // Note: note that users of this frame may well have arguments to some runtime |
| // while these values are on the stack. These positions neglect those arguments |
| // but the code in save_live_registers will take the argument count into |
| // account. |
| // |
| #ifdef _LP64 |
| #define SLOT2(x) x, |
| #define SLOT_PER_WORD 2 |
| #else |
| #define SLOT2(x) |
| #define SLOT_PER_WORD 1 |
| #endif // _LP64 |
| |
| enum reg_save_layout { |
| // 64bit needs to keep stack 16 byte aligned. So we add some alignment dummies to make that |
| // happen and will assert if the stack size we create is misaligned |
| #ifdef _LP64 |
| align_dummy_0, align_dummy_1, |
| #endif // _LP64 |
| #ifdef _WIN64 |
| // Windows always allocates space for it's argument registers (see |
| // frame::arg_reg_save_area_bytes). |
| arg_reg_save_1, arg_reg_save_1H, // 0, 4 |
| arg_reg_save_2, arg_reg_save_2H, // 8, 12 |
| arg_reg_save_3, arg_reg_save_3H, // 16, 20 |
| arg_reg_save_4, arg_reg_save_4H, // 24, 28 |
| #endif // _WIN64 |
| xmm_regs_as_doubles_off, // 32 |
| float_regs_as_doubles_off = xmm_regs_as_doubles_off + xmm_regs_as_doubles_size_in_slots, // 160 |
| fpu_state_off = float_regs_as_doubles_off + float_regs_as_doubles_size_in_slots, // 224 |
| // fpu_state_end_off is exclusive |
| fpu_state_end_off = fpu_state_off + (FPUStateSizeInWords / SLOT_PER_WORD), // 352 |
| marker = fpu_state_end_off, SLOT2(markerH) // 352, 356 |
| extra_space_offset, // 360 |
| #ifdef _LP64 |
| r15_off = extra_space_offset, r15H_off, // 360, 364 |
| r14_off, r14H_off, // 368, 372 |
| r13_off, r13H_off, // 376, 380 |
| r12_off, r12H_off, // 384, 388 |
| r11_off, r11H_off, // 392, 396 |
| r10_off, r10H_off, // 400, 404 |
| r9_off, r9H_off, // 408, 412 |
| r8_off, r8H_off, // 416, 420 |
| rdi_off, rdiH_off, // 424, 428 |
| #else |
| rdi_off = extra_space_offset, |
| #endif // _LP64 |
| rsi_off, SLOT2(rsiH_off) // 432, 436 |
| rbp_off, SLOT2(rbpH_off) // 440, 444 |
| rsp_off, SLOT2(rspH_off) // 448, 452 |
| rbx_off, SLOT2(rbxH_off) // 456, 460 |
| rdx_off, SLOT2(rdxH_off) // 464, 468 |
| rcx_off, SLOT2(rcxH_off) // 472, 476 |
| rax_off, SLOT2(raxH_off) // 480, 484 |
| saved_rbp_off, SLOT2(saved_rbpH_off) // 488, 492 |
| return_off, SLOT2(returnH_off) // 496, 500 |
| reg_save_frame_size // As noted: neglects any parameters to runtime // 504 |
| }; |
| |
| |
| |
| // Save off registers which might be killed by calls into the runtime. |
| // Tries to smart of about FP registers. In particular we separate |
| // saving and describing the FPU registers for deoptimization since we |
| // have to save the FPU registers twice if we describe them and on P4 |
| // saving FPU registers which don't contain anything appears |
| // expensive. The deopt blob is the only thing which needs to |
| // describe FPU registers. In all other cases it should be sufficient |
| // to simply save their current value. |
| |
| static OopMap* generate_oop_map(StubAssembler* sasm, int num_rt_args, |
| bool save_fpu_registers = true) { |
| |
| // In 64bit all the args are in regs so there are no additional stack slots |
| LP64_ONLY(num_rt_args = 0); |
| LP64_ONLY(assert((reg_save_frame_size * VMRegImpl::stack_slot_size) % 16 == 0, "must be 16 byte aligned");) |
| int frame_size_in_slots = reg_save_frame_size + num_rt_args; // args + thread |
| sasm->set_frame_size(frame_size_in_slots / VMRegImpl::slots_per_word); |
| |
| // record saved value locations in an OopMap |
| // locations are offsets from sp after runtime call; num_rt_args is number of arguments in call, including thread |
| OopMap* map = new OopMap(frame_size_in_slots, 0); |
| map->set_callee_saved(VMRegImpl::stack2reg(rax_off + num_rt_args), rax->as_VMReg()); |
| map->set_callee_saved(VMRegImpl::stack2reg(rcx_off + num_rt_args), rcx->as_VMReg()); |
| map->set_callee_saved(VMRegImpl::stack2reg(rdx_off + num_rt_args), rdx->as_VMReg()); |
| map->set_callee_saved(VMRegImpl::stack2reg(rbx_off + num_rt_args), rbx->as_VMReg()); |
| map->set_callee_saved(VMRegImpl::stack2reg(rsi_off + num_rt_args), rsi->as_VMReg()); |
| map->set_callee_saved(VMRegImpl::stack2reg(rdi_off + num_rt_args), rdi->as_VMReg()); |
| #ifdef _LP64 |
| map->set_callee_saved(VMRegImpl::stack2reg(r8_off + num_rt_args), r8->as_VMReg()); |
| map->set_callee_saved(VMRegImpl::stack2reg(r9_off + num_rt_args), r9->as_VMReg()); |
| map->set_callee_saved(VMRegImpl::stack2reg(r10_off + num_rt_args), r10->as_VMReg()); |
| map->set_callee_saved(VMRegImpl::stack2reg(r11_off + num_rt_args), r11->as_VMReg()); |
| map->set_callee_saved(VMRegImpl::stack2reg(r12_off + num_rt_args), r12->as_VMReg()); |
| map->set_callee_saved(VMRegImpl::stack2reg(r13_off + num_rt_args), r13->as_VMReg()); |
| map->set_callee_saved(VMRegImpl::stack2reg(r14_off + num_rt_args), r14->as_VMReg()); |
| map->set_callee_saved(VMRegImpl::stack2reg(r15_off + num_rt_args), r15->as_VMReg()); |
| |
| // This is stupid but needed. |
| map->set_callee_saved(VMRegImpl::stack2reg(raxH_off + num_rt_args), rax->as_VMReg()->next()); |
| map->set_callee_saved(VMRegImpl::stack2reg(rcxH_off + num_rt_args), rcx->as_VMReg()->next()); |
| map->set_callee_saved(VMRegImpl::stack2reg(rdxH_off + num_rt_args), rdx->as_VMReg()->next()); |
| map->set_callee_saved(VMRegImpl::stack2reg(rbxH_off + num_rt_args), rbx->as_VMReg()->next()); |
| map->set_callee_saved(VMRegImpl::stack2reg(rsiH_off + num_rt_args), rsi->as_VMReg()->next()); |
| map->set_callee_saved(VMRegImpl::stack2reg(rdiH_off + num_rt_args), rdi->as_VMReg()->next()); |
| |
| map->set_callee_saved(VMRegImpl::stack2reg(r8H_off + num_rt_args), r8->as_VMReg()->next()); |
| map->set_callee_saved(VMRegImpl::stack2reg(r9H_off + num_rt_args), r9->as_VMReg()->next()); |
| map->set_callee_saved(VMRegImpl::stack2reg(r10H_off + num_rt_args), r10->as_VMReg()->next()); |
| map->set_callee_saved(VMRegImpl::stack2reg(r11H_off + num_rt_args), r11->as_VMReg()->next()); |
| map->set_callee_saved(VMRegImpl::stack2reg(r12H_off + num_rt_args), r12->as_VMReg()->next()); |
| map->set_callee_saved(VMRegImpl::stack2reg(r13H_off + num_rt_args), r13->as_VMReg()->next()); |
| map->set_callee_saved(VMRegImpl::stack2reg(r14H_off + num_rt_args), r14->as_VMReg()->next()); |
| map->set_callee_saved(VMRegImpl::stack2reg(r15H_off + num_rt_args), r15->as_VMReg()->next()); |
| #endif // _LP64 |
| |
| int xmm_bypass_limit = FrameMap::nof_xmm_regs; |
| #ifdef _LP64 |
| if (UseAVX < 3) { |
| xmm_bypass_limit = xmm_bypass_limit / 2; |
| } |
| #endif |
| |
| if (save_fpu_registers) { |
| if (UseSSE < 2) { |
| int fpu_off = float_regs_as_doubles_off; |
| for (int n = 0; n < FrameMap::nof_fpu_regs; n++) { |
| VMReg fpu_name_0 = FrameMap::fpu_regname(n); |
| map->set_callee_saved(VMRegImpl::stack2reg(fpu_off + num_rt_args), fpu_name_0); |
| // %%% This is really a waste but we'll keep things as they were for now |
| if (true) { |
| map->set_callee_saved(VMRegImpl::stack2reg(fpu_off + 1 + num_rt_args), fpu_name_0->next()); |
| } |
| fpu_off += 2; |
| } |
| assert(fpu_off == fpu_state_off, "incorrect number of fpu stack slots"); |
| } |
| |
| if (UseSSE >= 2) { |
| int xmm_off = xmm_regs_as_doubles_off; |
| for (int n = 0; n < FrameMap::nof_xmm_regs; n++) { |
| if (n < xmm_bypass_limit) { |
| VMReg xmm_name_0 = as_XMMRegister(n)->as_VMReg(); |
| map->set_callee_saved(VMRegImpl::stack2reg(xmm_off + num_rt_args), xmm_name_0); |
| // %%% This is really a waste but we'll keep things as they were for now |
| if (true) { |
| map->set_callee_saved(VMRegImpl::stack2reg(xmm_off + 1 + num_rt_args), xmm_name_0->next()); |
| } |
| } |
| xmm_off += 2; |
| } |
| assert(xmm_off == float_regs_as_doubles_off, "incorrect number of xmm registers"); |
| |
| } else if (UseSSE == 1) { |
| int xmm_off = xmm_regs_as_doubles_off; |
| for (int n = 0; n < FrameMap::nof_fpu_regs; n++) { |
| VMReg xmm_name_0 = as_XMMRegister(n)->as_VMReg(); |
| map->set_callee_saved(VMRegImpl::stack2reg(xmm_off + num_rt_args), xmm_name_0); |
| xmm_off += 2; |
| } |
| assert(xmm_off == float_regs_as_doubles_off, "incorrect number of xmm registers"); |
| } |
| } |
| |
| return map; |
| } |
| |
| static OopMap* save_live_registers(StubAssembler* sasm, int num_rt_args, |
| bool save_fpu_registers = true) { |
| __ block_comment("save_live_registers"); |
| |
| __ pusha(); // integer registers |
| |
| // assert(float_regs_as_doubles_off % 2 == 0, "misaligned offset"); |
| // assert(xmm_regs_as_doubles_off % 2 == 0, "misaligned offset"); |
| |
| __ subptr(rsp, extra_space_offset * VMRegImpl::stack_slot_size); |
| |
| #ifdef ASSERT |
| __ movptr(Address(rsp, marker * VMRegImpl::stack_slot_size), (int32_t)0xfeedbeef); |
| #endif |
| |
| if (save_fpu_registers) { |
| if (UseSSE < 2) { |
| // save FPU stack |
| __ fnsave(Address(rsp, fpu_state_off * VMRegImpl::stack_slot_size)); |
| __ fwait(); |
| |
| #ifdef ASSERT |
| Label ok; |
| __ cmpw(Address(rsp, fpu_state_off * VMRegImpl::stack_slot_size), StubRoutines::fpu_cntrl_wrd_std()); |
| __ jccb(Assembler::equal, ok); |
| __ stop("corrupted control word detected"); |
| __ bind(ok); |
| #endif |
| |
| // Reset the control word to guard against exceptions being unmasked |
| // since fstp_d can cause FPU stack underflow exceptions. Write it |
| // into the on stack copy and then reload that to make sure that the |
| // current and future values are correct. |
| __ movw(Address(rsp, fpu_state_off * VMRegImpl::stack_slot_size), StubRoutines::fpu_cntrl_wrd_std()); |
| __ frstor(Address(rsp, fpu_state_off * VMRegImpl::stack_slot_size)); |
| |
| // Save the FPU registers in de-opt-able form |
| int offset = 0; |
| for (int n = 0; n < FrameMap::nof_fpu_regs; n++) { |
| __ fstp_d(Address(rsp, float_regs_as_doubles_off * VMRegImpl::stack_slot_size + offset)); |
| offset += 8; |
| } |
| } |
| |
| if (UseSSE >= 2) { |
| // save XMM registers |
| // XMM registers can contain float or double values, but this is not known here, |
| // so always save them as doubles. |
| // note that float values are _not_ converted automatically, so for float values |
| // the second word contains only garbage data. |
| int xmm_bypass_limit = FrameMap::nof_xmm_regs; |
| int offset = 0; |
| #ifdef _LP64 |
| if (UseAVX < 3) { |
| xmm_bypass_limit = xmm_bypass_limit / 2; |
| } |
| #endif |
| for (int n = 0; n < xmm_bypass_limit; n++) { |
| XMMRegister xmm_name = as_XMMRegister(n); |
| __ movdbl(Address(rsp, xmm_regs_as_doubles_off * VMRegImpl::stack_slot_size + offset), xmm_name); |
| offset += 8; |
| } |
| } else if (UseSSE == 1) { |
| // save XMM registers as float because double not supported without SSE2(num MMX == num fpu) |
| int offset = 0; |
| for (int n = 0; n < FrameMap::nof_fpu_regs; n++) { |
| XMMRegister xmm_name = as_XMMRegister(n); |
| __ movflt(Address(rsp, xmm_regs_as_doubles_off * VMRegImpl::stack_slot_size + offset), xmm_name); |
| offset += 8; |
| } |
| } |
| } |
| |
| // FPU stack must be empty now |
| __ verify_FPU(0, "save_live_registers"); |
| |
| return generate_oop_map(sasm, num_rt_args, save_fpu_registers); |
| } |
| |
| |
| static void restore_fpu(StubAssembler* sasm, bool restore_fpu_registers = true) { |
| if (restore_fpu_registers) { |
| if (UseSSE >= 2) { |
| // restore XMM registers |
| int xmm_bypass_limit = FrameMap::nof_xmm_regs; |
| #ifdef _LP64 |
| if (UseAVX < 3) { |
| xmm_bypass_limit = xmm_bypass_limit / 2; |
| } |
| #endif |
| int offset = 0; |
| for (int n = 0; n < xmm_bypass_limit; n++) { |
| XMMRegister xmm_name = as_XMMRegister(n); |
| __ movdbl(xmm_name, Address(rsp, xmm_regs_as_doubles_off * VMRegImpl::stack_slot_size + offset)); |
| offset += 8; |
| } |
| } else if (UseSSE == 1) { |
| // restore XMM registers(num MMX == num fpu) |
| int offset = 0; |
| for (int n = 0; n < FrameMap::nof_fpu_regs; n++) { |
| XMMRegister xmm_name = as_XMMRegister(n); |
| __ movflt(xmm_name, Address(rsp, xmm_regs_as_doubles_off * VMRegImpl::stack_slot_size + offset)); |
| offset += 8; |
| } |
| } |
| |
| if (UseSSE < 2) { |
| __ frstor(Address(rsp, fpu_state_off * VMRegImpl::stack_slot_size)); |
| } else { |
| // check that FPU stack is really empty |
| __ verify_FPU(0, "restore_live_registers"); |
| } |
| |
| } else { |
| // check that FPU stack is really empty |
| __ verify_FPU(0, "restore_live_registers"); |
| } |
| |
| #ifdef ASSERT |
| { |
| Label ok; |
| __ cmpptr(Address(rsp, marker * VMRegImpl::stack_slot_size), (int32_t)0xfeedbeef); |
| __ jcc(Assembler::equal, ok); |
| __ stop("bad offsets in frame"); |
| __ bind(ok); |
| } |
| #endif // ASSERT |
| |
| __ addptr(rsp, extra_space_offset * VMRegImpl::stack_slot_size); |
| } |
| |
| |
| static void restore_live_registers(StubAssembler* sasm, bool restore_fpu_registers = true) { |
| __ block_comment("restore_live_registers"); |
| |
| restore_fpu(sasm, restore_fpu_registers); |
| __ popa(); |
| } |
| |
| |
| static void restore_live_registers_except_rax(StubAssembler* sasm, bool restore_fpu_registers = true) { |
| __ block_comment("restore_live_registers_except_rax"); |
| |
| restore_fpu(sasm, restore_fpu_registers); |
| |
| #ifdef _LP64 |
| __ movptr(r15, Address(rsp, 0)); |
| __ movptr(r14, Address(rsp, wordSize)); |
| __ movptr(r13, Address(rsp, 2 * wordSize)); |
| __ movptr(r12, Address(rsp, 3 * wordSize)); |
| __ movptr(r11, Address(rsp, 4 * wordSize)); |
| __ movptr(r10, Address(rsp, 5 * wordSize)); |
| __ movptr(r9, Address(rsp, 6 * wordSize)); |
| __ movptr(r8, Address(rsp, 7 * wordSize)); |
| __ movptr(rdi, Address(rsp, 8 * wordSize)); |
| __ movptr(rsi, Address(rsp, 9 * wordSize)); |
| __ movptr(rbp, Address(rsp, 10 * wordSize)); |
| // skip rsp |
| __ movptr(rbx, Address(rsp, 12 * wordSize)); |
| __ movptr(rdx, Address(rsp, 13 * wordSize)); |
| __ movptr(rcx, Address(rsp, 14 * wordSize)); |
| |
| __ addptr(rsp, 16 * wordSize); |
| #else |
| |
| __ pop(rdi); |
| __ pop(rsi); |
| __ pop(rbp); |
| __ pop(rbx); // skip this value |
| __ pop(rbx); |
| __ pop(rdx); |
| __ pop(rcx); |
| __ addptr(rsp, BytesPerWord); |
| #endif // _LP64 |
| } |
| |
| |
| void Runtime1::initialize_pd() { |
| // nothing to do |
| } |
| |
| |
| // target: the entry point of the method that creates and posts the exception oop |
| // has_argument: true if the exception needs an argument (passed on stack because registers must be preserved) |
| |
| OopMapSet* Runtime1::generate_exception_throw(StubAssembler* sasm, address target, bool has_argument) { |
| // preserve all registers |
| int num_rt_args = has_argument ? 2 : 1; |
| OopMap* oop_map = save_live_registers(sasm, num_rt_args); |
| |
| // now all registers are saved and can be used freely |
| // verify that no old value is used accidentally |
| __ invalidate_registers(true, true, true, true, true, true); |
| |
| // registers used by this stub |
| const Register temp_reg = rbx; |
| |
| // load argument for exception that is passed as an argument into the stub |
| if (has_argument) { |
| #ifdef _LP64 |
| __ movptr(c_rarg1, Address(rbp, 2*BytesPerWord)); |
| #else |
| __ movptr(temp_reg, Address(rbp, 2*BytesPerWord)); |
| __ push(temp_reg); |
| #endif // _LP64 |
| } |
| int call_offset = __ call_RT(noreg, noreg, target, num_rt_args - 1); |
| |
| OopMapSet* oop_maps = new OopMapSet(); |
| oop_maps->add_gc_map(call_offset, oop_map); |
| |
| __ stop("should not reach here"); |
| |
| return oop_maps; |
| } |
| |
| |
| OopMapSet* Runtime1::generate_handle_exception(StubID id, StubAssembler *sasm) { |
| __ block_comment("generate_handle_exception"); |
| |
| // incoming parameters |
| const Register exception_oop = rax; |
| const Register exception_pc = rdx; |
| // other registers used in this stub |
| const Register thread = NOT_LP64(rdi) LP64_ONLY(r15_thread); |
| |
| // Save registers, if required. |
| OopMapSet* oop_maps = new OopMapSet(); |
| OopMap* oop_map = NULL; |
| switch (id) { |
| case forward_exception_id: |
| // We're handling an exception in the context of a compiled frame. |
| // The registers have been saved in the standard places. Perform |
| // an exception lookup in the caller and dispatch to the handler |
| // if found. Otherwise unwind and dispatch to the callers |
| // exception handler. |
| oop_map = generate_oop_map(sasm, 1 /*thread*/); |
| |
| // load and clear pending exception oop into RAX |
| __ movptr(exception_oop, Address(thread, Thread::pending_exception_offset())); |
| __ movptr(Address(thread, Thread::pending_exception_offset()), NULL_WORD); |
| |
| // load issuing PC (the return address for this stub) into rdx |
| __ movptr(exception_pc, Address(rbp, 1*BytesPerWord)); |
| |
| // make sure that the vm_results are cleared (may be unnecessary) |
| __ movptr(Address(thread, JavaThread::vm_result_offset()), NULL_WORD); |
| __ movptr(Address(thread, JavaThread::vm_result_2_offset()), NULL_WORD); |
| break; |
| case handle_exception_nofpu_id: |
| case handle_exception_id: |
| // At this point all registers MAY be live. |
| oop_map = save_live_registers(sasm, 1 /*thread*/, id != handle_exception_nofpu_id); |
| break; |
| case handle_exception_from_callee_id: { |
| // At this point all registers except exception oop (RAX) and |
| // exception pc (RDX) are dead. |
| const int frame_size = 2 /*BP, return address*/ NOT_LP64(+ 1 /*thread*/) WIN64_ONLY(+ frame::arg_reg_save_area_bytes / BytesPerWord); |
| oop_map = new OopMap(frame_size * VMRegImpl::slots_per_word, 0); |
| sasm->set_frame_size(frame_size); |
| WIN64_ONLY(__ subq(rsp, frame::arg_reg_save_area_bytes)); |
| break; |
| } |
| default: ShouldNotReachHere(); |
| } |
| |
| #ifdef TIERED |
| // C2 can leave the fpu stack dirty |
| if (UseSSE < 2) { |
| __ empty_FPU_stack(); |
| } |
| #endif // TIERED |
| |
| // verify that only rax, and rdx is valid at this time |
| __ invalidate_registers(false, true, true, false, true, true); |
| // verify that rax, contains a valid exception |
| __ verify_not_null_oop(exception_oop); |
| |
| // load address of JavaThread object for thread-local data |
| NOT_LP64(__ get_thread(thread);) |
| |
| #ifdef ASSERT |
| // check that fields in JavaThread for exception oop and issuing pc are |
| // empty before writing to them |
| Label oop_empty; |
| __ cmpptr(Address(thread, JavaThread::exception_oop_offset()), (int32_t) NULL_WORD); |
| __ jcc(Assembler::equal, oop_empty); |
| __ stop("exception oop already set"); |
| __ bind(oop_empty); |
| |
| Label pc_empty; |
| __ cmpptr(Address(thread, JavaThread::exception_pc_offset()), 0); |
| __ jcc(Assembler::equal, pc_empty); |
| __ stop("exception pc already set"); |
| __ bind(pc_empty); |
| #endif |
| |
| // save exception oop and issuing pc into JavaThread |
| // (exception handler will load it from here) |
| __ movptr(Address(thread, JavaThread::exception_oop_offset()), exception_oop); |
| __ movptr(Address(thread, JavaThread::exception_pc_offset()), exception_pc); |
| |
| // patch throwing pc into return address (has bci & oop map) |
| __ movptr(Address(rbp, 1*BytesPerWord), exception_pc); |
| |
| // compute the exception handler. |
| // the exception oop and the throwing pc are read from the fields in JavaThread |
| int call_offset = __ call_RT(noreg, noreg, CAST_FROM_FN_PTR(address, exception_handler_for_pc)); |
| oop_maps->add_gc_map(call_offset, oop_map); |
| |
| // rax: handler address |
| // will be the deopt blob if nmethod was deoptimized while we looked up |
| // handler regardless of whether handler existed in the nmethod. |
| |
| // only rax, is valid at this time, all other registers have been destroyed by the runtime call |
| __ invalidate_registers(false, true, true, true, true, true); |
| |
| // patch the return address, this stub will directly return to the exception handler |
| __ movptr(Address(rbp, 1*BytesPerWord), rax); |
| |
| switch (id) { |
| case forward_exception_id: |
| case handle_exception_nofpu_id: |
| case handle_exception_id: |
| // Restore the registers that were saved at the beginning. |
| restore_live_registers(sasm, id != handle_exception_nofpu_id); |
| break; |
| case handle_exception_from_callee_id: |
| // WIN64_ONLY: No need to add frame::arg_reg_save_area_bytes to SP |
| // since we do a leave anyway. |
| |
| // Pop the return address. |
| __ leave(); |
| __ pop(rcx); |
| __ jmp(rcx); // jump to exception handler |
| break; |
| default: ShouldNotReachHere(); |
| } |
| |
| return oop_maps; |
| } |
| |
| |
| void Runtime1::generate_unwind_exception(StubAssembler *sasm) { |
| // incoming parameters |
| const Register exception_oop = rax; |
| // callee-saved copy of exception_oop during runtime call |
| const Register exception_oop_callee_saved = NOT_LP64(rsi) LP64_ONLY(r14); |
| // other registers used in this stub |
| const Register exception_pc = rdx; |
| const Register handler_addr = rbx; |
| const Register thread = NOT_LP64(rdi) LP64_ONLY(r15_thread); |
| |
| // verify that only rax, is valid at this time |
| __ invalidate_registers(false, true, true, true, true, true); |
| |
| #ifdef ASSERT |
| // check that fields in JavaThread for exception oop and issuing pc are empty |
| NOT_LP64(__ get_thread(thread);) |
| Label oop_empty; |
| __ cmpptr(Address(thread, JavaThread::exception_oop_offset()), 0); |
| __ jcc(Assembler::equal, oop_empty); |
| __ stop("exception oop must be empty"); |
| __ bind(oop_empty); |
| |
| Label pc_empty; |
| __ cmpptr(Address(thread, JavaThread::exception_pc_offset()), 0); |
| __ jcc(Assembler::equal, pc_empty); |
| __ stop("exception pc must be empty"); |
| __ bind(pc_empty); |
| #endif |
| |
| // clear the FPU stack in case any FPU results are left behind |
| __ empty_FPU_stack(); |
| |
| // save exception_oop in callee-saved register to preserve it during runtime calls |
| __ verify_not_null_oop(exception_oop); |
| __ movptr(exception_oop_callee_saved, exception_oop); |
| |
| NOT_LP64(__ get_thread(thread);) |
| // Get return address (is on top of stack after leave). |
| __ movptr(exception_pc, Address(rsp, 0)); |
| |
| // search the exception handler address of the caller (using the return address) |
| __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::exception_handler_for_return_address), thread, exception_pc); |
| // rax: exception handler address of the caller |
| |
| // Only RAX and RSI are valid at this time, all other registers have been destroyed by the call. |
| __ invalidate_registers(false, true, true, true, false, true); |
| |
| // move result of call into correct register |
| __ movptr(handler_addr, rax); |
| |
| // Restore exception oop to RAX (required convention of exception handler). |
| __ movptr(exception_oop, exception_oop_callee_saved); |
| |
| // verify that there is really a valid exception in rax |
| __ verify_not_null_oop(exception_oop); |
| |
| // get throwing pc (= return address). |
| // rdx has been destroyed by the call, so it must be set again |
| // the pop is also necessary to simulate the effect of a ret(0) |
| __ pop(exception_pc); |
| |
| // continue at exception handler (return address removed) |
| // note: do *not* remove arguments when unwinding the |
| // activation since the caller assumes having |
| // all arguments on the stack when entering the |
| // runtime to determine the exception handler |
| // (GC happens at call site with arguments!) |
| // rax: exception oop |
| // rdx: throwing pc |
| // rbx: exception handler |
| __ jmp(handler_addr); |
| } |
| |
| |
| OopMapSet* Runtime1::generate_patching(StubAssembler* sasm, address target) { |
| // use the maximum number of runtime-arguments here because it is difficult to |
| // distinguish each RT-Call. |
| // Note: This number affects also the RT-Call in generate_handle_exception because |
| // the oop-map is shared for all calls. |
| const int num_rt_args = 2; // thread + dummy |
| |
| DeoptimizationBlob* deopt_blob = SharedRuntime::deopt_blob(); |
| assert(deopt_blob != NULL, "deoptimization blob must have been created"); |
| |
| OopMap* oop_map = save_live_registers(sasm, num_rt_args); |
| |
| #ifdef _LP64 |
| const Register thread = r15_thread; |
| // No need to worry about dummy |
| __ mov(c_rarg0, thread); |
| #else |
| __ push(rax); // push dummy |
| |
| const Register thread = rdi; // is callee-saved register (Visual C++ calling conventions) |
| // push java thread (becomes first argument of C function) |
| __ get_thread(thread); |
| __ push(thread); |
| #endif // _LP64 |
| __ set_last_Java_frame(thread, noreg, rbp, NULL); |
| // do the call |
| __ call(RuntimeAddress(target)); |
| OopMapSet* oop_maps = new OopMapSet(); |
| oop_maps->add_gc_map(__ offset(), oop_map); |
| // verify callee-saved register |
| #ifdef ASSERT |
| guarantee(thread != rax, "change this code"); |
| __ push(rax); |
| { Label L; |
| __ get_thread(rax); |
| __ cmpptr(thread, rax); |
| __ jcc(Assembler::equal, L); |
| __ stop("StubAssembler::call_RT: rdi/r15 not callee saved?"); |
| __ bind(L); |
| } |
| __ pop(rax); |
| #endif |
| __ reset_last_Java_frame(thread, true); |
| #ifndef _LP64 |
| __ pop(rcx); // discard thread arg |
| __ pop(rcx); // discard dummy |
| #endif // _LP64 |
| |
| // check for pending exceptions |
| { Label L; |
| __ cmpptr(Address(thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD); |
| __ jcc(Assembler::equal, L); |
| // exception pending => remove activation and forward to exception handler |
| |
| __ testptr(rax, rax); // have we deoptimized? |
| __ jump_cc(Assembler::equal, |
| RuntimeAddress(Runtime1::entry_for(Runtime1::forward_exception_id))); |
| |
| // the deopt blob expects exceptions in the special fields of |
| // JavaThread, so copy and clear pending exception. |
| |
| // load and clear pending exception |
| __ movptr(rax, Address(thread, Thread::pending_exception_offset())); |
| __ movptr(Address(thread, Thread::pending_exception_offset()), NULL_WORD); |
| |
| // check that there is really a valid exception |
| __ verify_not_null_oop(rax); |
| |
| // load throwing pc: this is the return address of the stub |
| __ movptr(rdx, Address(rsp, return_off * VMRegImpl::stack_slot_size)); |
| |
| #ifdef ASSERT |
| // check that fields in JavaThread for exception oop and issuing pc are empty |
| Label oop_empty; |
| __ cmpptr(Address(thread, JavaThread::exception_oop_offset()), (int32_t)NULL_WORD); |
| __ jcc(Assembler::equal, oop_empty); |
| __ stop("exception oop must be empty"); |
| __ bind(oop_empty); |
| |
| Label pc_empty; |
| __ cmpptr(Address(thread, JavaThread::exception_pc_offset()), (int32_t)NULL_WORD); |
| __ jcc(Assembler::equal, pc_empty); |
| __ stop("exception pc must be empty"); |
| __ bind(pc_empty); |
| #endif |
| |
| // store exception oop and throwing pc to JavaThread |
| __ movptr(Address(thread, JavaThread::exception_oop_offset()), rax); |
| __ movptr(Address(thread, JavaThread::exception_pc_offset()), rdx); |
| |
| restore_live_registers(sasm); |
| |
| __ leave(); |
| __ addptr(rsp, BytesPerWord); // remove return address from stack |
| |
| // Forward the exception directly to deopt blob. We can blow no |
| // registers and must leave throwing pc on the stack. A patch may |
| // have values live in registers so the entry point with the |
| // exception in tls. |
| __ jump(RuntimeAddress(deopt_blob->unpack_with_exception_in_tls())); |
| |
| __ bind(L); |
| } |
| |
| |
| // Runtime will return true if the nmethod has been deoptimized during |
| // the patching process. In that case we must do a deopt reexecute instead. |
| |
| Label reexecuteEntry, cont; |
| |
| __ testptr(rax, rax); // have we deoptimized? |
| __ jcc(Assembler::equal, cont); // no |
| |
| // Will reexecute. Proper return address is already on the stack we just restore |
| // registers, pop all of our frame but the return address and jump to the deopt blob |
| restore_live_registers(sasm); |
| __ leave(); |
| __ jump(RuntimeAddress(deopt_blob->unpack_with_reexecution())); |
| |
| __ bind(cont); |
| restore_live_registers(sasm); |
| __ leave(); |
| __ ret(0); |
| |
| return oop_maps; |
| } |
| |
| |
| OopMapSet* Runtime1::generate_code_for(StubID id, StubAssembler* sasm) { |
| |
| // for better readability |
| const bool must_gc_arguments = true; |
| const bool dont_gc_arguments = false; |
| |
| // default value; overwritten for some optimized stubs that are called from methods that do not use the fpu |
| bool save_fpu_registers = true; |
| |
| // stub code & info for the different stubs |
| OopMapSet* oop_maps = NULL; |
| switch (id) { |
| case forward_exception_id: |
| { |
| oop_maps = generate_handle_exception(id, sasm); |
| __ leave(); |
| __ ret(0); |
| } |
| break; |
| |
| case new_instance_id: |
| case fast_new_instance_id: |
| case fast_new_instance_init_check_id: |
| { |
| Register klass = rdx; // Incoming |
| Register obj = rax; // Result |
| |
| if (id == new_instance_id) { |
| __ set_info("new_instance", dont_gc_arguments); |
| } else if (id == fast_new_instance_id) { |
| __ set_info("fast new_instance", dont_gc_arguments); |
| } else { |
| assert(id == fast_new_instance_init_check_id, "bad StubID"); |
| __ set_info("fast new_instance init check", dont_gc_arguments); |
| } |
| |
| if ((id == fast_new_instance_id || id == fast_new_instance_init_check_id) && |
| UseTLAB && FastTLABRefill) { |
| Label slow_path; |
| Register obj_size = rcx; |
| Register t1 = rbx; |
| Register t2 = rsi; |
| assert_different_registers(klass, obj, obj_size, t1, t2); |
| |
| __ push(rdi); |
| __ push(rbx); |
| |
| if (id == fast_new_instance_init_check_id) { |
| // make sure the klass is initialized |
| __ cmpb(Address(klass, InstanceKlass::init_state_offset()), InstanceKlass::fully_initialized); |
| __ jcc(Assembler::notEqual, slow_path); |
| } |
| |
| #ifdef ASSERT |
| // assert object can be fast path allocated |
| { |
| Label ok, not_ok; |
| __ movl(obj_size, Address(klass, Klass::layout_helper_offset())); |
| __ cmpl(obj_size, 0); // make sure it's an instance (LH > 0) |
| __ jcc(Assembler::lessEqual, not_ok); |
| __ testl(obj_size, Klass::_lh_instance_slow_path_bit); |
| __ jcc(Assembler::zero, ok); |
| __ bind(not_ok); |
| __ stop("assert(can be fast path allocated)"); |
| __ should_not_reach_here(); |
| __ bind(ok); |
| } |
| #endif // ASSERT |
| |
| // if we got here then the TLAB allocation failed, so try |
| // refilling the TLAB or allocating directly from eden. |
| Label retry_tlab, try_eden; |
| const Register thread = |
| __ tlab_refill(retry_tlab, try_eden, slow_path); // does not destroy rdx (klass), returns rdi |
| |
| __ bind(retry_tlab); |
| |
| // get the instance size (size is postive so movl is fine for 64bit) |
| __ movl(obj_size, Address(klass, Klass::layout_helper_offset())); |
| |
| __ tlab_allocate(obj, obj_size, 0, t1, t2, slow_path); |
| |
| __ initialize_object(obj, klass, obj_size, 0, t1, t2, /* is_tlab_allocated */ true); |
| __ verify_oop(obj); |
| __ pop(rbx); |
| __ pop(rdi); |
| __ ret(0); |
| |
| __ bind(try_eden); |
| // get the instance size (size is postive so movl is fine for 64bit) |
| __ movl(obj_size, Address(klass, Klass::layout_helper_offset())); |
| |
| __ eden_allocate(obj, obj_size, 0, t1, slow_path); |
| __ incr_allocated_bytes(thread, obj_size, 0); |
| |
| __ initialize_object(obj, klass, obj_size, 0, t1, t2, /* is_tlab_allocated */ false); |
| __ verify_oop(obj); |
| __ pop(rbx); |
| __ pop(rdi); |
| __ ret(0); |
| |
| __ bind(slow_path); |
| __ pop(rbx); |
| __ pop(rdi); |
| } |
| |
| __ enter(); |
| OopMap* map = save_live_registers(sasm, 2); |
| int call_offset = __ call_RT(obj, noreg, CAST_FROM_FN_PTR(address, new_instance), klass); |
| oop_maps = new OopMapSet(); |
| oop_maps->add_gc_map(call_offset, map); |
| restore_live_registers_except_rax(sasm); |
| __ verify_oop(obj); |
| __ leave(); |
| __ ret(0); |
| |
| // rax,: new instance |
| } |
| |
| break; |
| |
| case counter_overflow_id: |
| { |
| Register bci = rax, method = rbx; |
| __ enter(); |
| OopMap* map = save_live_registers(sasm, 3); |
| // Retrieve bci |
| __ movl(bci, Address(rbp, 2*BytesPerWord)); |
| // And a pointer to the Method* |
| __ movptr(method, Address(rbp, 3*BytesPerWord)); |
| int call_offset = __ call_RT(noreg, noreg, CAST_FROM_FN_PTR(address, counter_overflow), bci, method); |
| oop_maps = new OopMapSet(); |
| oop_maps->add_gc_map(call_offset, map); |
| restore_live_registers(sasm); |
| __ leave(); |
| __ ret(0); |
| } |
| break; |
| |
| case new_type_array_id: |
| case new_object_array_id: |
| { |
| Register length = rbx; // Incoming |
| Register klass = rdx; // Incoming |
| Register obj = rax; // Result |
| |
| if (id == new_type_array_id) { |
| __ set_info("new_type_array", dont_gc_arguments); |
| } else { |
| __ set_info("new_object_array", dont_gc_arguments); |
| } |
| |
| #ifdef ASSERT |
| // assert object type is really an array of the proper kind |
| { |
| Label ok; |
| Register t0 = obj; |
| __ movl(t0, Address(klass, Klass::layout_helper_offset())); |
| __ sarl(t0, Klass::_lh_array_tag_shift); |
| int tag = ((id == new_type_array_id) |
| ? Klass::_lh_array_tag_type_value |
| : Klass::_lh_array_tag_obj_value); |
| __ cmpl(t0, tag); |
| __ jcc(Assembler::equal, ok); |
| __ stop("assert(is an array klass)"); |
| __ should_not_reach_here(); |
| __ bind(ok); |
| } |
| #endif // ASSERT |
| |
| if (UseTLAB && FastTLABRefill) { |
| Register arr_size = rsi; |
| Register t1 = rcx; // must be rcx for use as shift count |
| Register t2 = rdi; |
| Label slow_path; |
| assert_different_registers(length, klass, obj, arr_size, t1, t2); |
| |
| // check that array length is small enough for fast path. |
| __ cmpl(length, C1_MacroAssembler::max_array_allocation_length); |
| __ jcc(Assembler::above, slow_path); |
| |
| // if we got here then the TLAB allocation failed, so try |
| // refilling the TLAB or allocating directly from eden. |
| Label retry_tlab, try_eden; |
| const Register thread = |
| __ tlab_refill(retry_tlab, try_eden, slow_path); // preserves rbx & rdx, returns rdi |
| |
| __ bind(retry_tlab); |
| |
| // get the allocation size: round_up(hdr + length << (layout_helper & 0x1F)) |
| // since size is positive movl does right thing on 64bit |
| __ movl(t1, Address(klass, Klass::layout_helper_offset())); |
| // since size is postive movl does right thing on 64bit |
| __ movl(arr_size, length); |
| assert(t1 == rcx, "fixed register usage"); |
| __ shlptr(arr_size /* by t1=rcx, mod 32 */); |
| __ shrptr(t1, Klass::_lh_header_size_shift); |
| __ andptr(t1, Klass::_lh_header_size_mask); |
| __ addptr(arr_size, t1); |
| __ addptr(arr_size, MinObjAlignmentInBytesMask); // align up |
| __ andptr(arr_size, ~MinObjAlignmentInBytesMask); |
| |
| __ tlab_allocate(obj, arr_size, 0, t1, t2, slow_path); // preserves arr_size |
| |
| __ initialize_header(obj, klass, length, t1, t2); |
| __ movb(t1, Address(klass, in_bytes(Klass::layout_helper_offset()) + (Klass::_lh_header_size_shift / BitsPerByte))); |
| assert(Klass::_lh_header_size_shift % BitsPerByte == 0, "bytewise"); |
| assert(Klass::_lh_header_size_mask <= 0xFF, "bytewise"); |
| __ andptr(t1, Klass::_lh_header_size_mask); |
| __ subptr(arr_size, t1); // body length |
| __ addptr(t1, obj); // body start |
| if (!ZeroTLAB) { |
| __ initialize_body(t1, arr_size, 0, t2); |
| } |
| __ verify_oop(obj); |
| __ ret(0); |
| |
| __ bind(try_eden); |
| // get the allocation size: round_up(hdr + length << (layout_helper & 0x1F)) |
| // since size is positive movl does right thing on 64bit |
| __ movl(t1, Address(klass, Klass::layout_helper_offset())); |
| // since size is postive movl does right thing on 64bit |
| __ movl(arr_size, length); |
| assert(t1 == rcx, "fixed register usage"); |
| __ shlptr(arr_size /* by t1=rcx, mod 32 */); |
| __ shrptr(t1, Klass::_lh_header_size_shift); |
| __ andptr(t1, Klass::_lh_header_size_mask); |
| __ addptr(arr_size, t1); |
| __ addptr(arr_size, MinObjAlignmentInBytesMask); // align up |
| __ andptr(arr_size, ~MinObjAlignmentInBytesMask); |
| |
| __ eden_allocate(obj, arr_size, 0, t1, slow_path); // preserves arr_size |
| __ incr_allocated_bytes(thread, arr_size, 0); |
| |
| __ initialize_header(obj, klass, length, t1, t2); |
| __ movb(t1, Address(klass, in_bytes(Klass::layout_helper_offset()) + (Klass::_lh_header_size_shift / BitsPerByte))); |
| assert(Klass::_lh_header_size_shift % BitsPerByte == 0, "bytewise"); |
| assert(Klass::_lh_header_size_mask <= 0xFF, "bytewise"); |
| __ andptr(t1, Klass::_lh_header_size_mask); |
| __ subptr(arr_size, t1); // body length |
| __ addptr(t1, obj); // body start |
| __ initialize_body(t1, arr_size, 0, t2); |
| __ verify_oop(obj); |
| __ ret(0); |
| |
| __ bind(slow_path); |
| } |
| |
| __ enter(); |
| OopMap* map = save_live_registers(sasm, 3); |
| int call_offset; |
| if (id == new_type_array_id) { |
| call_offset = __ call_RT(obj, noreg, CAST_FROM_FN_PTR(address, new_type_array), klass, length); |
| } else { |
| call_offset = __ call_RT(obj, noreg, CAST_FROM_FN_PTR(address, new_object_array), klass, length); |
| } |
| |
| oop_maps = new OopMapSet(); |
| oop_maps->add_gc_map(call_offset, map); |
| restore_live_registers_except_rax(sasm); |
| |
| __ verify_oop(obj); |
| __ leave(); |
| __ ret(0); |
| |
| // rax,: new array |
| } |
| break; |
| |
| case new_multi_array_id: |
| { StubFrame f(sasm, "new_multi_array", dont_gc_arguments); |
| // rax,: klass |
| // rbx,: rank |
| // rcx: address of 1st dimension |
| OopMap* map = save_live_registers(sasm, 4); |
| int call_offset = __ call_RT(rax, noreg, CAST_FROM_FN_PTR(address, new_multi_array), rax, rbx, rcx); |
| |
| oop_maps = new OopMapSet(); |
| oop_maps->add_gc_map(call_offset, map); |
| restore_live_registers_except_rax(sasm); |
| |
| // rax,: new multi array |
| __ verify_oop(rax); |
| } |
| break; |
| |
| case register_finalizer_id: |
| { |
| __ set_info("register_finalizer", dont_gc_arguments); |
| |
| // This is called via call_runtime so the arguments |
| // will be place in C abi locations |
| |
| #ifdef _LP64 |
| __ verify_oop(c_rarg0); |
| __ mov(rax, c_rarg0); |
| #else |
| // The object is passed on the stack and we haven't pushed a |
| // frame yet so it's one work away from top of stack. |
| __ movptr(rax, Address(rsp, 1 * BytesPerWord)); |
| __ verify_oop(rax); |
| #endif // _LP64 |
| |
| // load the klass and check the has finalizer flag |
| Label register_finalizer; |
| Register t = rsi; |
| __ load_klass(t, rax); |
| __ movl(t, Address(t, Klass::access_flags_offset())); |
| __ testl(t, JVM_ACC_HAS_FINALIZER); |
| __ jcc(Assembler::notZero, register_finalizer); |
| __ ret(0); |
| |
| __ bind(register_finalizer); |
| __ enter(); |
| OopMap* oop_map = save_live_registers(sasm, 2 /*num_rt_args */); |
| int call_offset = __ call_RT(noreg, noreg, CAST_FROM_FN_PTR(address, SharedRuntime::register_finalizer), rax); |
| oop_maps = new OopMapSet(); |
| oop_maps->add_gc_map(call_offset, oop_map); |
| |
| // Now restore all the live registers |
| restore_live_registers(sasm); |
| |
| __ leave(); |
| __ ret(0); |
| } |
| break; |
| |
| case throw_range_check_failed_id: |
| { StubFrame f(sasm, "range_check_failed", dont_gc_arguments); |
| oop_maps = generate_exception_throw(sasm, CAST_FROM_FN_PTR(address, throw_range_check_exception), true); |
| } |
| break; |
| |
| case throw_index_exception_id: |
| { StubFrame f(sasm, "index_range_check_failed", dont_gc_arguments); |
| oop_maps = generate_exception_throw(sasm, CAST_FROM_FN_PTR(address, throw_index_exception), true); |
| } |
| break; |
| |
| case throw_div0_exception_id: |
| { StubFrame f(sasm, "throw_div0_exception", dont_gc_arguments); |
| oop_maps = generate_exception_throw(sasm, CAST_FROM_FN_PTR(address, throw_div0_exception), false); |
| } |
| break; |
| |
| case throw_null_pointer_exception_id: |
| { StubFrame f(sasm, "throw_null_pointer_exception", dont_gc_arguments); |
| oop_maps = generate_exception_throw(sasm, CAST_FROM_FN_PTR(address, throw_null_pointer_exception), false); |
| } |
| break; |
| |
| case handle_exception_nofpu_id: |
| case handle_exception_id: |
| { StubFrame f(sasm, "handle_exception", dont_gc_arguments); |
| oop_maps = generate_handle_exception(id, sasm); |
| } |
| break; |
| |
| case handle_exception_from_callee_id: |
| { StubFrame f(sasm, "handle_exception_from_callee", dont_gc_arguments); |
| oop_maps = generate_handle_exception(id, sasm); |
| } |
| break; |
| |
| case unwind_exception_id: |
| { __ set_info("unwind_exception", dont_gc_arguments); |
| // note: no stubframe since we are about to leave the current |
| // activation and we are calling a leaf VM function only. |
| generate_unwind_exception(sasm); |
| } |
| break; |
| |
| case throw_array_store_exception_id: |
| { StubFrame f(sasm, "throw_array_store_exception", dont_gc_arguments); |
| // tos + 0: link |
| // + 1: return address |
| oop_maps = generate_exception_throw(sasm, CAST_FROM_FN_PTR(address, throw_array_store_exception), true); |
| } |
| break; |
| |
| case throw_class_cast_exception_id: |
| { StubFrame f(sasm, "throw_class_cast_exception", dont_gc_arguments); |
| oop_maps = generate_exception_throw(sasm, CAST_FROM_FN_PTR(address, throw_class_cast_exception), true); |
| } |
| break; |
| |
| case throw_incompatible_class_change_error_id: |
| { StubFrame f(sasm, "throw_incompatible_class_cast_exception", dont_gc_arguments); |
| oop_maps = generate_exception_throw(sasm, CAST_FROM_FN_PTR(address, throw_incompatible_class_change_error), false); |
| } |
| break; |
| |
| case slow_subtype_check_id: |
| { |
| // Typical calling sequence: |
| // __ push(klass_RInfo); // object klass or other subclass |
| // __ push(sup_k_RInfo); // array element klass or other superclass |
| // __ call(slow_subtype_check); |
| // Note that the subclass is pushed first, and is therefore deepest. |
| // Previous versions of this code reversed the names 'sub' and 'super'. |
| // This was operationally harmless but made the code unreadable. |
| enum layout { |
| rax_off, SLOT2(raxH_off) |
| rcx_off, SLOT2(rcxH_off) |
| rsi_off, SLOT2(rsiH_off) |
| rdi_off, SLOT2(rdiH_off) |
| // saved_rbp_off, SLOT2(saved_rbpH_off) |
| return_off, SLOT2(returnH_off) |
| sup_k_off, SLOT2(sup_kH_off) |
| klass_off, SLOT2(superH_off) |
| framesize, |
| result_off = klass_off // deepest argument is also the return value |
| }; |
| |
| __ set_info("slow_subtype_check", dont_gc_arguments); |
| __ push(rdi); |
| __ push(rsi); |
| __ push(rcx); |
| __ push(rax); |
| |
| // This is called by pushing args and not with C abi |
| __ movptr(rsi, Address(rsp, (klass_off) * VMRegImpl::stack_slot_size)); // subclass |
| __ movptr(rax, Address(rsp, (sup_k_off) * VMRegImpl::stack_slot_size)); // superclass |
| |
| Label miss; |
| __ check_klass_subtype_slow_path(rsi, rax, rcx, rdi, NULL, &miss); |
| |
| // fallthrough on success: |
| __ movptr(Address(rsp, (result_off) * VMRegImpl::stack_slot_size), 1); // result |
| __ pop(rax); |
| __ pop(rcx); |
| __ pop(rsi); |
| __ pop(rdi); |
| __ ret(0); |
| |
| __ bind(miss); |
| __ movptr(Address(rsp, (result_off) * VMRegImpl::stack_slot_size), NULL_WORD); // result |
| __ pop(rax); |
| __ pop(rcx); |
| __ pop(rsi); |
| __ pop(rdi); |
| __ ret(0); |
| } |
| break; |
| |
| case monitorenter_nofpu_id: |
| save_fpu_registers = false; |
| // fall through |
| case monitorenter_id: |
| { |
| StubFrame f(sasm, "monitorenter", dont_gc_arguments); |
| OopMap* map = save_live_registers(sasm, 3, save_fpu_registers); |
| |
| // Called with store_parameter and not C abi |
| |
| f.load_argument(1, rax); // rax,: object |
| f.load_argument(0, rbx); // rbx,: lock address |
| |
| int call_offset = __ call_RT(noreg, noreg, CAST_FROM_FN_PTR(address, monitorenter), rax, rbx); |
| |
| oop_maps = new OopMapSet(); |
| oop_maps->add_gc_map(call_offset, map); |
| restore_live_registers(sasm, save_fpu_registers); |
| } |
| break; |
| |
| case monitorexit_nofpu_id: |
| save_fpu_registers = false; |
| // fall through |
| case monitorexit_id: |
| { |
| StubFrame f(sasm, "monitorexit", dont_gc_arguments); |
| OopMap* map = save_live_registers(sasm, 2, save_fpu_registers); |
| |
| // Called with store_parameter and not C abi |
| |
| f.load_argument(0, rax); // rax,: lock address |
| |
| // note: really a leaf routine but must setup last java sp |
| // => use call_RT for now (speed can be improved by |
| // doing last java sp setup manually) |
| int call_offset = __ call_RT(noreg, noreg, CAST_FROM_FN_PTR(address, monitorexit), rax); |
| |
| oop_maps = new OopMapSet(); |
| oop_maps->add_gc_map(call_offset, map); |
| restore_live_registers(sasm, save_fpu_registers); |
| } |
| break; |
| |
| case deoptimize_id: |
| { |
| StubFrame f(sasm, "deoptimize", dont_gc_arguments); |
| const int num_rt_args = 2; // thread, trap_request |
| OopMap* oop_map = save_live_registers(sasm, num_rt_args); |
| f.load_argument(0, rax); |
| int call_offset = __ call_RT(noreg, noreg, CAST_FROM_FN_PTR(address, deoptimize), rax); |
| oop_maps = new OopMapSet(); |
| oop_maps->add_gc_map(call_offset, oop_map); |
| restore_live_registers(sasm); |
| DeoptimizationBlob* deopt_blob = SharedRuntime::deopt_blob(); |
| assert(deopt_blob != NULL, "deoptimization blob must have been created"); |
| __ leave(); |
| __ jump(RuntimeAddress(deopt_blob->unpack_with_reexecution())); |
| } |
| break; |
| |
| case access_field_patching_id: |
| { StubFrame f(sasm, "access_field_patching", dont_gc_arguments); |
| // we should set up register map |
| oop_maps = generate_patching(sasm, CAST_FROM_FN_PTR(address, access_field_patching)); |
| } |
| break; |
| |
| case load_klass_patching_id: |
| { StubFrame f(sasm, "load_klass_patching", dont_gc_arguments); |
| // we should set up register map |
| oop_maps = generate_patching(sasm, CAST_FROM_FN_PTR(address, move_klass_patching)); |
| } |
| break; |
| |
| case load_mirror_patching_id: |
| { StubFrame f(sasm, "load_mirror_patching", dont_gc_arguments); |
| // we should set up register map |
| oop_maps = generate_patching(sasm, CAST_FROM_FN_PTR(address, move_mirror_patching)); |
| } |
| break; |
| |
| case load_appendix_patching_id: |
| { StubFrame f(sasm, "load_appendix_patching", dont_gc_arguments); |
| // we should set up register map |
| oop_maps = generate_patching(sasm, CAST_FROM_FN_PTR(address, move_appendix_patching)); |
| } |
| break; |
| |
| case dtrace_object_alloc_id: |
| { // rax,: object |
| StubFrame f(sasm, "dtrace_object_alloc", dont_gc_arguments); |
| // we can't gc here so skip the oopmap but make sure that all |
| // the live registers get saved. |
| save_live_registers(sasm, 1); |
| |
| __ NOT_LP64(push(rax)) LP64_ONLY(mov(c_rarg0, rax)); |
| __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_object_alloc))); |
| NOT_LP64(__ pop(rax)); |
| |
| restore_live_registers(sasm); |
| } |
| break; |
| |
| case fpu2long_stub_id: |
| { |
| // rax, and rdx are destroyed, but should be free since the result is returned there |
| // preserve rsi,ecx |
| __ push(rsi); |
| __ push(rcx); |
| LP64_ONLY(__ push(rdx);) |
| |
| // check for NaN |
| Label return0, do_return, return_min_jlong, do_convert; |
| |
| Address value_high_word(rsp, wordSize + 4); |
| Address value_low_word(rsp, wordSize); |
| Address result_high_word(rsp, 3*wordSize + 4); |
| Address result_low_word(rsp, 3*wordSize); |
| |
| __ subptr(rsp, 32); // more than enough on 32bit |
| __ fst_d(value_low_word); |
| __ movl(rax, value_high_word); |
| __ andl(rax, 0x7ff00000); |
| __ cmpl(rax, 0x7ff00000); |
| __ jcc(Assembler::notEqual, do_convert); |
| __ movl(rax, value_high_word); |
| __ andl(rax, 0xfffff); |
| __ orl(rax, value_low_word); |
| __ jcc(Assembler::notZero, return0); |
| |
| __ bind(do_convert); |
| __ fnstcw(Address(rsp, 0)); |
| __ movzwl(rax, Address(rsp, 0)); |
| __ orl(rax, 0xc00); |
| __ movw(Address(rsp, 2), rax); |
| __ fldcw(Address(rsp, 2)); |
| __ fwait(); |
| __ fistp_d(result_low_word); |
| __ fldcw(Address(rsp, 0)); |
| __ fwait(); |
| // This gets the entire long in rax on 64bit |
| __ movptr(rax, result_low_word); |
| // testing of high bits |
| __ movl(rdx, result_high_word); |
| __ mov(rcx, rax); |
| // What the heck is the point of the next instruction??? |
| __ xorl(rcx, 0x0); |
| __ movl(rsi, 0x80000000); |
| __ xorl(rsi, rdx); |
| __ orl(rcx, rsi); |
| __ jcc(Assembler::notEqual, do_return); |
| __ fldz(); |
| __ fcomp_d(value_low_word); |
| __ fnstsw_ax(); |
| #ifdef _LP64 |
| __ testl(rax, 0x4100); // ZF & CF == 0 |
| __ jcc(Assembler::equal, return_min_jlong); |
| #else |
| __ sahf(); |
| __ jcc(Assembler::above, return_min_jlong); |
| #endif // _LP64 |
| // return max_jlong |
| #ifndef _LP64 |
| __ movl(rdx, 0x7fffffff); |
| __ movl(rax, 0xffffffff); |
| #else |
| __ mov64(rax, CONST64(0x7fffffffffffffff)); |
| #endif // _LP64 |
| __ jmp(do_return); |
| |
| __ bind(return_min_jlong); |
| #ifndef _LP64 |
| __ movl(rdx, 0x80000000); |
| __ xorl(rax, rax); |
| #else |
| __ mov64(rax, UCONST64(0x8000000000000000)); |
| #endif // _LP64 |
| __ jmp(do_return); |
| |
| __ bind(return0); |
| __ fpop(); |
| #ifndef _LP64 |
| __ xorptr(rdx,rdx); |
| __ xorptr(rax,rax); |
| #else |
| __ xorptr(rax, rax); |
| #endif // _LP64 |
| |
| __ bind(do_return); |
| __ addptr(rsp, 32); |
| LP64_ONLY(__ pop(rdx);) |
| __ pop(rcx); |
| __ pop(rsi); |
| __ ret(0); |
| } |
| break; |
| |
| #if INCLUDE_ALL_GCS |
| case g1_pre_barrier_slow_id: |
| { |
| StubFrame f(sasm, "g1_pre_barrier", dont_gc_arguments); |
| // arg0 : previous value of memory |
| |
| BarrierSet* bs = Universe::heap()->barrier_set(); |
| if (bs->kind() != BarrierSet::G1SATBCTLogging) { |
| __ movptr(rax, (int)id); |
| __ call_RT(noreg, noreg, CAST_FROM_FN_PTR(address, unimplemented_entry), rax); |
| __ should_not_reach_here(); |
| break; |
| } |
| __ push(rax); |
| __ push(rdx); |
| |
| const Register pre_val = rax; |
| const Register thread = NOT_LP64(rax) LP64_ONLY(r15_thread); |
| const Register tmp = rdx; |
| |
| NOT_LP64(__ get_thread(thread);) |
| |
| Address queue_active(thread, in_bytes(JavaThread::satb_mark_queue_offset() + |
| SATBMarkQueue::byte_offset_of_active())); |
| Address queue_index(thread, in_bytes(JavaThread::satb_mark_queue_offset() + |
| SATBMarkQueue::byte_offset_of_index())); |
| Address buffer(thread, in_bytes(JavaThread::satb_mark_queue_offset() + |
| SATBMarkQueue::byte_offset_of_buf())); |
| |
| Label done; |
| Label runtime; |
| |
| // Is marking still active? |
| if (in_bytes(SATBMarkQueue::byte_width_of_active()) == 4) { |
| __ cmpl(queue_active, 0); |
| } else { |
| assert(in_bytes(SATBMarkQueue::byte_width_of_active()) == 1, "Assumption"); |
| __ cmpb(queue_active, 0); |
| } |
| __ jcc(Assembler::equal, done); |
| |
| // Can we store original value in the thread's buffer? |
| |
| __ movptr(tmp, queue_index); |
| __ testptr(tmp, tmp); |
| __ jcc(Assembler::zero, runtime); |
| __ subptr(tmp, wordSize); |
| __ movptr(queue_index, tmp); |
| __ addptr(tmp, buffer); |
| |
| // prev_val (rax) |
| f.load_argument(0, pre_val); |
| __ movptr(Address(tmp, 0), pre_val); |
| __ jmp(done); |
| |
| __ bind(runtime); |
| |
| save_live_registers(sasm, 3); |
| |
| // load the pre-value |
| f.load_argument(0, rcx); |
| __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::g1_wb_pre), rcx, thread); |
| |
| restore_live_registers(sasm); |
| |
| __ bind(done); |
| |
| __ pop(rdx); |
| __ pop(rax); |
| } |
| break; |
| |
| case g1_post_barrier_slow_id: |
| { |
| StubFrame f(sasm, "g1_post_barrier", dont_gc_arguments); |
| |
| |
| // arg0: store_address |
| Address store_addr(rbp, 2*BytesPerWord); |
| |
| CardTableModRefBS* ct = |
| barrier_set_cast<CardTableModRefBS>(Universe::heap()->barrier_set()); |
| assert(sizeof(*ct->byte_map_base) == sizeof(jbyte), "adjust this code"); |
| |
| Label done; |
| Label enqueued; |
| Label runtime; |
| |
| // At this point we know new_value is non-NULL and the new_value crosses regions. |
| // Must check to see if card is already dirty |
| |
| const Register thread = NOT_LP64(rax) LP64_ONLY(r15_thread); |
| |
| Address queue_index(thread, in_bytes(JavaThread::dirty_card_queue_offset() + |
| DirtyCardQueue::byte_offset_of_index())); |
| Address buffer(thread, in_bytes(JavaThread::dirty_card_queue_offset() + |
| DirtyCardQueue::byte_offset_of_buf())); |
| |
| __ push(rax); |
| __ push(rcx); |
| |
| const Register cardtable = rax; |
| const Register card_addr = rcx; |
| |
| f.load_argument(0, card_addr); |
| __ shrptr(card_addr, CardTableModRefBS::card_shift); |
| // Do not use ExternalAddress to load 'byte_map_base', since 'byte_map_base' is NOT |
| // a valid address and therefore is not properly handled by the relocation code. |
| __ movptr(cardtable, (intptr_t)ct->byte_map_base); |
| __ addptr(card_addr, cardtable); |
| |
| NOT_LP64(__ get_thread(thread);) |
| |
| __ cmpb(Address(card_addr, 0), (int)G1SATBCardTableModRefBS::g1_young_card_val()); |
| __ jcc(Assembler::equal, done); |
| |
| __ membar(Assembler::Membar_mask_bits(Assembler::StoreLoad)); |
| __ cmpb(Address(card_addr, 0), (int)CardTableModRefBS::dirty_card_val()); |
| __ jcc(Assembler::equal, done); |
| |
| // storing region crossing non-NULL, card is clean. |
| // dirty card and log. |
| |
| __ movb(Address(card_addr, 0), (int)CardTableModRefBS::dirty_card_val()); |
| |
| const Register tmp = rdx; |
| __ push(rdx); |
| |
| __ movptr(tmp, queue_index); |
| __ testptr(tmp, tmp); |
| __ jcc(Assembler::zero, runtime); |
| __ subptr(tmp, wordSize); |
| __ movptr(queue_index, tmp); |
| __ addptr(tmp, buffer); |
| __ movptr(Address(tmp, 0), card_addr); |
| __ jmp(enqueued); |
| |
| __ bind(runtime); |
| |
| save_live_registers(sasm, 3); |
| |
| __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::g1_wb_post), card_addr, thread); |
| |
| restore_live_registers(sasm); |
| |
| __ bind(enqueued); |
| __ pop(rdx); |
| |
| __ bind(done); |
| __ pop(rcx); |
| __ pop(rax); |
| } |
| break; |
| #endif // INCLUDE_ALL_GCS |
| |
| case predicate_failed_trap_id: |
| { |
| StubFrame f(sasm, "predicate_failed_trap", dont_gc_arguments); |
| |
| OopMap* map = save_live_registers(sasm, 1); |
| |
| int call_offset = __ call_RT(noreg, noreg, CAST_FROM_FN_PTR(address, predicate_failed_trap)); |
| oop_maps = new OopMapSet(); |
| oop_maps->add_gc_map(call_offset, map); |
| restore_live_registers(sasm); |
| __ leave(); |
| DeoptimizationBlob* deopt_blob = SharedRuntime::deopt_blob(); |
| assert(deopt_blob != NULL, "deoptimization blob must have been created"); |
| |
| __ jump(RuntimeAddress(deopt_blob->unpack_with_reexecution())); |
| } |
| break; |
| |
| default: |
| { StubFrame f(sasm, "unimplemented entry", dont_gc_arguments); |
| __ movptr(rax, (int)id); |
| __ call_RT(noreg, noreg, CAST_FROM_FN_PTR(address, unimplemented_entry), rax); |
| __ should_not_reach_here(); |
| } |
| break; |
| } |
| return oop_maps; |
| } |
| |
| #undef __ |
| |
| const char *Runtime1::pd_name_for_address(address entry) { |
| return "<unknown function>"; |
| } |