| /* |
| * Copyright (c) 1997, 2016, Oracle and/or its affiliates. All rights reserved. |
| * Copyright (c) 2014, 2015, Red Hat Inc. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| * |
| */ |
| |
| #include <sys/types.h> |
| |
| #include "precompiled.hpp" |
| #include "asm/assembler.hpp" |
| #include "asm/assembler.inline.hpp" |
| #include "interpreter/interpreter.hpp" |
| |
| #include "compiler/disassembler.hpp" |
| #include "memory/resourceArea.hpp" |
| #include "nativeInst_aarch64.hpp" |
| #include "oops/klass.inline.hpp" |
| #include "oops/oop.inline.hpp" |
| #include "opto/compile.hpp" |
| #include "opto/node.hpp" |
| #include "runtime/biasedLocking.hpp" |
| #include "runtime/icache.hpp" |
| #include "runtime/interfaceSupport.hpp" |
| #include "runtime/sharedRuntime.hpp" |
| #include "runtime/thread.hpp" |
| |
| #if INCLUDE_ALL_GCS |
| #include "gc/g1/g1CollectedHeap.inline.hpp" |
| #include "gc/g1/g1SATBCardTableModRefBS.hpp" |
| #include "gc/g1/heapRegion.hpp" |
| #endif |
| |
| #ifdef PRODUCT |
| #define BLOCK_COMMENT(str) /* nothing */ |
| #define STOP(error) stop(error) |
| #else |
| #define BLOCK_COMMENT(str) block_comment(str) |
| #define STOP(error) block_comment(error); stop(error) |
| #endif |
| |
| #define BIND(label) bind(label); BLOCK_COMMENT(#label ":") |
| |
| // Patch any kind of instruction; there may be several instructions. |
| // Return the total length (in bytes) of the instructions. |
| int MacroAssembler::pd_patch_instruction_size(address branch, address target) { |
| int instructions = 1; |
| assert((uint64_t)target < (1ul << 48), "48-bit overflow in address constant"); |
| long offset = (target - branch) >> 2; |
| unsigned insn = *(unsigned*)branch; |
| if ((Instruction_aarch64::extract(insn, 29, 24) & 0b111011) == 0b011000) { |
| // Load register (literal) |
| Instruction_aarch64::spatch(branch, 23, 5, offset); |
| } else if (Instruction_aarch64::extract(insn, 30, 26) == 0b00101) { |
| // Unconditional branch (immediate) |
| Instruction_aarch64::spatch(branch, 25, 0, offset); |
| } else if (Instruction_aarch64::extract(insn, 31, 25) == 0b0101010) { |
| // Conditional branch (immediate) |
| Instruction_aarch64::spatch(branch, 23, 5, offset); |
| } else if (Instruction_aarch64::extract(insn, 30, 25) == 0b011010) { |
| // Compare & branch (immediate) |
| Instruction_aarch64::spatch(branch, 23, 5, offset); |
| } else if (Instruction_aarch64::extract(insn, 30, 25) == 0b011011) { |
| // Test & branch (immediate) |
| Instruction_aarch64::spatch(branch, 18, 5, offset); |
| } else if (Instruction_aarch64::extract(insn, 28, 24) == 0b10000) { |
| // PC-rel. addressing |
| offset = target-branch; |
| int shift = Instruction_aarch64::extract(insn, 31, 31); |
| if (shift) { |
| u_int64_t dest = (u_int64_t)target; |
| uint64_t pc_page = (uint64_t)branch >> 12; |
| uint64_t adr_page = (uint64_t)target >> 12; |
| unsigned offset_lo = dest & 0xfff; |
| offset = adr_page - pc_page; |
| |
| // We handle 4 types of PC relative addressing |
| // 1 - adrp Rx, target_page |
| // ldr/str Ry, [Rx, #offset_in_page] |
| // 2 - adrp Rx, target_page |
| // add Ry, Rx, #offset_in_page |
| // 3 - adrp Rx, target_page (page aligned reloc, offset == 0) |
| // movk Rx, #imm16<<32 |
| // 4 - adrp Rx, target_page (page aligned reloc, offset == 0) |
| // In the first 3 cases we must check that Rx is the same in the adrp and the |
| // subsequent ldr/str, add or movk instruction. Otherwise we could accidentally end |
| // up treating a type 4 relocation as a type 1, 2 or 3 just because it happened |
| // to be followed by a random unrelated ldr/str, add or movk instruction. |
| // |
| unsigned insn2 = ((unsigned*)branch)[1]; |
| if (Instruction_aarch64::extract(insn2, 29, 24) == 0b111001 && |
| Instruction_aarch64::extract(insn, 4, 0) == |
| Instruction_aarch64::extract(insn2, 9, 5)) { |
| // Load/store register (unsigned immediate) |
| unsigned size = Instruction_aarch64::extract(insn2, 31, 30); |
| Instruction_aarch64::patch(branch + sizeof (unsigned), |
| 21, 10, offset_lo >> size); |
| guarantee(((dest >> size) << size) == dest, "misaligned target"); |
| instructions = 2; |
| } else if (Instruction_aarch64::extract(insn2, 31, 22) == 0b1001000100 && |
| Instruction_aarch64::extract(insn, 4, 0) == |
| Instruction_aarch64::extract(insn2, 4, 0)) { |
| // add (immediate) |
| Instruction_aarch64::patch(branch + sizeof (unsigned), |
| 21, 10, offset_lo); |
| instructions = 2; |
| } else if (Instruction_aarch64::extract(insn2, 31, 21) == 0b11110010110 && |
| Instruction_aarch64::extract(insn, 4, 0) == |
| Instruction_aarch64::extract(insn2, 4, 0)) { |
| // movk #imm16<<32 |
| Instruction_aarch64::patch(branch + 4, 20, 5, (uint64_t)target >> 32); |
| long dest = ((long)target & 0xffffffffL) | ((long)branch & 0xffff00000000L); |
| long pc_page = (long)branch >> 12; |
| long adr_page = (long)dest >> 12; |
| offset = adr_page - pc_page; |
| instructions = 2; |
| } |
| } |
| int offset_lo = offset & 3; |
| offset >>= 2; |
| Instruction_aarch64::spatch(branch, 23, 5, offset); |
| Instruction_aarch64::patch(branch, 30, 29, offset_lo); |
| } else if (Instruction_aarch64::extract(insn, 31, 21) == 0b11010010100) { |
| u_int64_t dest = (u_int64_t)target; |
| // Move wide constant |
| assert(nativeInstruction_at(branch+4)->is_movk(), "wrong insns in patch"); |
| assert(nativeInstruction_at(branch+8)->is_movk(), "wrong insns in patch"); |
| Instruction_aarch64::patch(branch, 20, 5, dest & 0xffff); |
| Instruction_aarch64::patch(branch+4, 20, 5, (dest >>= 16) & 0xffff); |
| Instruction_aarch64::patch(branch+8, 20, 5, (dest >>= 16) & 0xffff); |
| assert(target_addr_for_insn(branch) == target, "should be"); |
| instructions = 3; |
| } else if (Instruction_aarch64::extract(insn, 31, 22) == 0b1011100101 && |
| Instruction_aarch64::extract(insn, 4, 0) == 0b11111) { |
| // nothing to do |
| assert(target == 0, "did not expect to relocate target for polling page load"); |
| } else { |
| ShouldNotReachHere(); |
| } |
| return instructions * NativeInstruction::instruction_size; |
| } |
| |
| int MacroAssembler::patch_oop(address insn_addr, address o) { |
| int instructions; |
| unsigned insn = *(unsigned*)insn_addr; |
| assert(nativeInstruction_at(insn_addr+4)->is_movk(), "wrong insns in patch"); |
| |
| // OOPs are either narrow (32 bits) or wide (48 bits). We encode |
| // narrow OOPs by setting the upper 16 bits in the first |
| // instruction. |
| if (Instruction_aarch64::extract(insn, 31, 21) == 0b11010010101) { |
| // Move narrow OOP |
| narrowOop n = oopDesc::encode_heap_oop((oop)o); |
| Instruction_aarch64::patch(insn_addr, 20, 5, n >> 16); |
| Instruction_aarch64::patch(insn_addr+4, 20, 5, n & 0xffff); |
| instructions = 2; |
| } else { |
| // Move wide OOP |
| assert(nativeInstruction_at(insn_addr+8)->is_movk(), "wrong insns in patch"); |
| uintptr_t dest = (uintptr_t)o; |
| Instruction_aarch64::patch(insn_addr, 20, 5, dest & 0xffff); |
| Instruction_aarch64::patch(insn_addr+4, 20, 5, (dest >>= 16) & 0xffff); |
| Instruction_aarch64::patch(insn_addr+8, 20, 5, (dest >>= 16) & 0xffff); |
| instructions = 3; |
| } |
| return instructions * NativeInstruction::instruction_size; |
| } |
| |
| address MacroAssembler::target_addr_for_insn(address insn_addr, unsigned insn) { |
| long offset = 0; |
| if ((Instruction_aarch64::extract(insn, 29, 24) & 0b011011) == 0b00011000) { |
| // Load register (literal) |
| offset = Instruction_aarch64::sextract(insn, 23, 5); |
| return address(((uint64_t)insn_addr + (offset << 2))); |
| } else if (Instruction_aarch64::extract(insn, 30, 26) == 0b00101) { |
| // Unconditional branch (immediate) |
| offset = Instruction_aarch64::sextract(insn, 25, 0); |
| } else if (Instruction_aarch64::extract(insn, 31, 25) == 0b0101010) { |
| // Conditional branch (immediate) |
| offset = Instruction_aarch64::sextract(insn, 23, 5); |
| } else if (Instruction_aarch64::extract(insn, 30, 25) == 0b011010) { |
| // Compare & branch (immediate) |
| offset = Instruction_aarch64::sextract(insn, 23, 5); |
| } else if (Instruction_aarch64::extract(insn, 30, 25) == 0b011011) { |
| // Test & branch (immediate) |
| offset = Instruction_aarch64::sextract(insn, 18, 5); |
| } else if (Instruction_aarch64::extract(insn, 28, 24) == 0b10000) { |
| // PC-rel. addressing |
| offset = Instruction_aarch64::extract(insn, 30, 29); |
| offset |= Instruction_aarch64::sextract(insn, 23, 5) << 2; |
| int shift = Instruction_aarch64::extract(insn, 31, 31) ? 12 : 0; |
| if (shift) { |
| offset <<= shift; |
| uint64_t target_page = ((uint64_t)insn_addr) + offset; |
| target_page &= ((uint64_t)-1) << shift; |
| // Return the target address for the following sequences |
| // 1 - adrp Rx, target_page |
| // ldr/str Ry, [Rx, #offset_in_page] |
| // 2 - adrp Rx, target_page |
| // add Ry, Rx, #offset_in_page |
| // 3 - adrp Rx, target_page (page aligned reloc, offset == 0) |
| // movk Rx, #imm12<<32 |
| // 4 - adrp Rx, target_page (page aligned reloc, offset == 0) |
| // |
| // In the first two cases we check that the register is the same and |
| // return the target_page + the offset within the page. |
| // Otherwise we assume it is a page aligned relocation and return |
| // the target page only. |
| // |
| unsigned insn2 = ((unsigned*)insn_addr)[1]; |
| if (Instruction_aarch64::extract(insn2, 29, 24) == 0b111001 && |
| Instruction_aarch64::extract(insn, 4, 0) == |
| Instruction_aarch64::extract(insn2, 9, 5)) { |
| // Load/store register (unsigned immediate) |
| unsigned int byte_offset = Instruction_aarch64::extract(insn2, 21, 10); |
| unsigned int size = Instruction_aarch64::extract(insn2, 31, 30); |
| return address(target_page + (byte_offset << size)); |
| } else if (Instruction_aarch64::extract(insn2, 31, 22) == 0b1001000100 && |
| Instruction_aarch64::extract(insn, 4, 0) == |
| Instruction_aarch64::extract(insn2, 4, 0)) { |
| // add (immediate) |
| unsigned int byte_offset = Instruction_aarch64::extract(insn2, 21, 10); |
| return address(target_page + byte_offset); |
| } else { |
| if (Instruction_aarch64::extract(insn2, 31, 21) == 0b11110010110 && |
| Instruction_aarch64::extract(insn, 4, 0) == |
| Instruction_aarch64::extract(insn2, 4, 0)) { |
| target_page = (target_page & 0xffffffff) | |
| ((uint64_t)Instruction_aarch64::extract(insn2, 20, 5) << 32); |
| } |
| return (address)target_page; |
| } |
| } else { |
| ShouldNotReachHere(); |
| } |
| } else if (Instruction_aarch64::extract(insn, 31, 23) == 0b110100101) { |
| u_int32_t *insns = (u_int32_t *)insn_addr; |
| // Move wide constant: movz, movk, movk. See movptr(). |
| assert(nativeInstruction_at(insns+1)->is_movk(), "wrong insns in patch"); |
| assert(nativeInstruction_at(insns+2)->is_movk(), "wrong insns in patch"); |
| return address(u_int64_t(Instruction_aarch64::extract(insns[0], 20, 5)) |
| + (u_int64_t(Instruction_aarch64::extract(insns[1], 20, 5)) << 16) |
| + (u_int64_t(Instruction_aarch64::extract(insns[2], 20, 5)) << 32)); |
| } else if (Instruction_aarch64::extract(insn, 31, 22) == 0b1011100101 && |
| Instruction_aarch64::extract(insn, 4, 0) == 0b11111) { |
| return 0; |
| } else { |
| ShouldNotReachHere(); |
| } |
| return address(((uint64_t)insn_addr + (offset << 2))); |
| } |
| |
| void MacroAssembler::serialize_memory(Register thread, Register tmp) { |
| dsb(Assembler::SY); |
| } |
| |
| |
| void MacroAssembler::reset_last_Java_frame(bool clear_fp, |
| bool clear_pc) { |
| // we must set sp to zero to clear frame |
| str(zr, Address(rthread, JavaThread::last_Java_sp_offset())); |
| // must clear fp, so that compiled frames are not confused; it is |
| // possible that we need it only for debugging |
| if (clear_fp) { |
| str(zr, Address(rthread, JavaThread::last_Java_fp_offset())); |
| } |
| |
| if (clear_pc) { |
| str(zr, Address(rthread, JavaThread::last_Java_pc_offset())); |
| } |
| } |
| |
| // Calls to C land |
| // |
| // When entering C land, the rfp, & resp of the last Java frame have to be recorded |
| // in the (thread-local) JavaThread object. When leaving C land, the last Java fp |
| // has to be reset to 0. This is required to allow proper stack traversal. |
| void MacroAssembler::set_last_Java_frame(Register last_java_sp, |
| Register last_java_fp, |
| Register last_java_pc, |
| Register scratch) { |
| |
| if (last_java_pc->is_valid()) { |
| str(last_java_pc, Address(rthread, |
| JavaThread::frame_anchor_offset() |
| + JavaFrameAnchor::last_Java_pc_offset())); |
| } |
| |
| // determine last_java_sp register |
| if (last_java_sp == sp) { |
| mov(scratch, sp); |
| last_java_sp = scratch; |
| } else if (!last_java_sp->is_valid()) { |
| last_java_sp = esp; |
| } |
| |
| str(last_java_sp, Address(rthread, JavaThread::last_Java_sp_offset())); |
| |
| // last_java_fp is optional |
| if (last_java_fp->is_valid()) { |
| str(last_java_fp, Address(rthread, JavaThread::last_Java_fp_offset())); |
| } |
| } |
| |
| void MacroAssembler::set_last_Java_frame(Register last_java_sp, |
| Register last_java_fp, |
| address last_java_pc, |
| Register scratch) { |
| if (last_java_pc != NULL) { |
| adr(scratch, last_java_pc); |
| } else { |
| // FIXME: This is almost never correct. We should delete all |
| // cases of set_last_Java_frame with last_java_pc=NULL and use the |
| // correct return address instead. |
| adr(scratch, pc()); |
| } |
| |
| str(scratch, Address(rthread, |
| JavaThread::frame_anchor_offset() |
| + JavaFrameAnchor::last_Java_pc_offset())); |
| |
| set_last_Java_frame(last_java_sp, last_java_fp, noreg, scratch); |
| } |
| |
| void MacroAssembler::set_last_Java_frame(Register last_java_sp, |
| Register last_java_fp, |
| Label &L, |
| Register scratch) { |
| if (L.is_bound()) { |
| set_last_Java_frame(last_java_sp, last_java_fp, target(L), scratch); |
| } else { |
| InstructionMark im(this); |
| L.add_patch_at(code(), locator()); |
| set_last_Java_frame(last_java_sp, last_java_fp, (address)NULL, scratch); |
| } |
| } |
| |
| void MacroAssembler::far_call(Address entry, CodeBuffer *cbuf, Register tmp) { |
| assert(ReservedCodeCacheSize < 4*G, "branch out of range"); |
| assert(CodeCache::find_blob(entry.target()) != NULL, |
| "destination of far call not found in code cache"); |
| if (far_branches()) { |
| unsigned long offset; |
| // We can use ADRP here because we know that the total size of |
| // the code cache cannot exceed 2Gb. |
| adrp(tmp, entry, offset); |
| add(tmp, tmp, offset); |
| if (cbuf) cbuf->set_insts_mark(); |
| blr(tmp); |
| } else { |
| if (cbuf) cbuf->set_insts_mark(); |
| bl(entry); |
| } |
| } |
| |
| void MacroAssembler::far_jump(Address entry, CodeBuffer *cbuf, Register tmp) { |
| assert(ReservedCodeCacheSize < 4*G, "branch out of range"); |
| assert(CodeCache::find_blob(entry.target()) != NULL, |
| "destination of far call not found in code cache"); |
| if (far_branches()) { |
| unsigned long offset; |
| // We can use ADRP here because we know that the total size of |
| // the code cache cannot exceed 2Gb. |
| adrp(tmp, entry, offset); |
| add(tmp, tmp, offset); |
| if (cbuf) cbuf->set_insts_mark(); |
| br(tmp); |
| } else { |
| if (cbuf) cbuf->set_insts_mark(); |
| b(entry); |
| } |
| } |
| |
| int MacroAssembler::biased_locking_enter(Register lock_reg, |
| Register obj_reg, |
| Register swap_reg, |
| Register tmp_reg, |
| bool swap_reg_contains_mark, |
| Label& done, |
| Label* slow_case, |
| BiasedLockingCounters* counters) { |
| assert(UseBiasedLocking, "why call this otherwise?"); |
| assert_different_registers(lock_reg, obj_reg, swap_reg); |
| |
| if (PrintBiasedLockingStatistics && counters == NULL) |
| counters = BiasedLocking::counters(); |
| |
| assert_different_registers(lock_reg, obj_reg, swap_reg, tmp_reg, rscratch1, rscratch2, noreg); |
| assert(markOopDesc::age_shift == markOopDesc::lock_bits + markOopDesc::biased_lock_bits, "biased locking makes assumptions about bit layout"); |
| Address mark_addr (obj_reg, oopDesc::mark_offset_in_bytes()); |
| Address klass_addr (obj_reg, oopDesc::klass_offset_in_bytes()); |
| Address saved_mark_addr(lock_reg, 0); |
| |
| // Biased locking |
| // See whether the lock is currently biased toward our thread and |
| // whether the epoch is still valid |
| // Note that the runtime guarantees sufficient alignment of JavaThread |
| // pointers to allow age to be placed into low bits |
| // First check to see whether biasing is even enabled for this object |
| Label cas_label; |
| int null_check_offset = -1; |
| if (!swap_reg_contains_mark) { |
| null_check_offset = offset(); |
| ldr(swap_reg, mark_addr); |
| } |
| andr(tmp_reg, swap_reg, markOopDesc::biased_lock_mask_in_place); |
| cmp(tmp_reg, markOopDesc::biased_lock_pattern); |
| br(Assembler::NE, cas_label); |
| // The bias pattern is present in the object's header. Need to check |
| // whether the bias owner and the epoch are both still current. |
| load_prototype_header(tmp_reg, obj_reg); |
| orr(tmp_reg, tmp_reg, rthread); |
| eor(tmp_reg, swap_reg, tmp_reg); |
| andr(tmp_reg, tmp_reg, ~((int) markOopDesc::age_mask_in_place)); |
| if (counters != NULL) { |
| Label around; |
| cbnz(tmp_reg, around); |
| atomic_incw(Address((address)counters->biased_lock_entry_count_addr()), tmp_reg, rscratch1, rscratch2); |
| b(done); |
| bind(around); |
| } else { |
| cbz(tmp_reg, done); |
| } |
| |
| Label try_revoke_bias; |
| Label try_rebias; |
| |
| // At this point we know that the header has the bias pattern and |
| // that we are not the bias owner in the current epoch. We need to |
| // figure out more details about the state of the header in order to |
| // know what operations can be legally performed on the object's |
| // header. |
| |
| // If the low three bits in the xor result aren't clear, that means |
| // the prototype header is no longer biased and we have to revoke |
| // the bias on this object. |
| andr(rscratch1, tmp_reg, markOopDesc::biased_lock_mask_in_place); |
| cbnz(rscratch1, try_revoke_bias); |
| |
| // Biasing is still enabled for this data type. See whether the |
| // epoch of the current bias is still valid, meaning that the epoch |
| // bits of the mark word are equal to the epoch bits of the |
| // prototype header. (Note that the prototype header's epoch bits |
| // only change at a safepoint.) If not, attempt to rebias the object |
| // toward the current thread. Note that we must be absolutely sure |
| // that the current epoch is invalid in order to do this because |
| // otherwise the manipulations it performs on the mark word are |
| // illegal. |
| andr(rscratch1, tmp_reg, markOopDesc::epoch_mask_in_place); |
| cbnz(rscratch1, try_rebias); |
| |
| // The epoch of the current bias is still valid but we know nothing |
| // about the owner; it might be set or it might be clear. Try to |
| // acquire the bias of the object using an atomic operation. If this |
| // fails we will go in to the runtime to revoke the object's bias. |
| // Note that we first construct the presumed unbiased header so we |
| // don't accidentally blow away another thread's valid bias. |
| { |
| Label here; |
| mov(rscratch1, markOopDesc::biased_lock_mask_in_place | markOopDesc::age_mask_in_place | markOopDesc::epoch_mask_in_place); |
| andr(swap_reg, swap_reg, rscratch1); |
| orr(tmp_reg, swap_reg, rthread); |
| cmpxchgptr(swap_reg, tmp_reg, obj_reg, rscratch1, here, slow_case); |
| // If the biasing toward our thread failed, this means that |
| // another thread succeeded in biasing it toward itself and we |
| // need to revoke that bias. The revocation will occur in the |
| // interpreter runtime in the slow case. |
| bind(here); |
| if (counters != NULL) { |
| atomic_incw(Address((address)counters->anonymously_biased_lock_entry_count_addr()), |
| tmp_reg, rscratch1, rscratch2); |
| } |
| } |
| b(done); |
| |
| bind(try_rebias); |
| // At this point we know the epoch has expired, meaning that the |
| // current "bias owner", if any, is actually invalid. Under these |
| // circumstances _only_, we are allowed to use the current header's |
| // value as the comparison value when doing the cas to acquire the |
| // bias in the current epoch. In other words, we allow transfer of |
| // the bias from one thread to another directly in this situation. |
| // |
| // FIXME: due to a lack of registers we currently blow away the age |
| // bits in this situation. Should attempt to preserve them. |
| { |
| Label here; |
| load_prototype_header(tmp_reg, obj_reg); |
| orr(tmp_reg, rthread, tmp_reg); |
| cmpxchgptr(swap_reg, tmp_reg, obj_reg, rscratch1, here, slow_case); |
| // If the biasing toward our thread failed, then another thread |
| // succeeded in biasing it toward itself and we need to revoke that |
| // bias. The revocation will occur in the runtime in the slow case. |
| bind(here); |
| if (counters != NULL) { |
| atomic_incw(Address((address)counters->rebiased_lock_entry_count_addr()), |
| tmp_reg, rscratch1, rscratch2); |
| } |
| } |
| b(done); |
| |
| bind(try_revoke_bias); |
| // The prototype mark in the klass doesn't have the bias bit set any |
| // more, indicating that objects of this data type are not supposed |
| // to be biased any more. We are going to try to reset the mark of |
| // this object to the prototype value and fall through to the |
| // CAS-based locking scheme. Note that if our CAS fails, it means |
| // that another thread raced us for the privilege of revoking the |
| // bias of this particular object, so it's okay to continue in the |
| // normal locking code. |
| // |
| // FIXME: due to a lack of registers we currently blow away the age |
| // bits in this situation. Should attempt to preserve them. |
| { |
| Label here, nope; |
| load_prototype_header(tmp_reg, obj_reg); |
| cmpxchgptr(swap_reg, tmp_reg, obj_reg, rscratch1, here, &nope); |
| bind(here); |
| |
| // Fall through to the normal CAS-based lock, because no matter what |
| // the result of the above CAS, some thread must have succeeded in |
| // removing the bias bit from the object's header. |
| if (counters != NULL) { |
| atomic_incw(Address((address)counters->revoked_lock_entry_count_addr()), tmp_reg, |
| rscratch1, rscratch2); |
| } |
| bind(nope); |
| } |
| |
| bind(cas_label); |
| |
| return null_check_offset; |
| } |
| |
| void MacroAssembler::biased_locking_exit(Register obj_reg, Register temp_reg, Label& done) { |
| assert(UseBiasedLocking, "why call this otherwise?"); |
| |
| // Check for biased locking unlock case, which is a no-op |
| // Note: we do not have to check the thread ID for two reasons. |
| // First, the interpreter checks for IllegalMonitorStateException at |
| // a higher level. Second, if the bias was revoked while we held the |
| // lock, the object could not be rebiased toward another thread, so |
| // the bias bit would be clear. |
| ldr(temp_reg, Address(obj_reg, oopDesc::mark_offset_in_bytes())); |
| andr(temp_reg, temp_reg, markOopDesc::biased_lock_mask_in_place); |
| cmp(temp_reg, markOopDesc::biased_lock_pattern); |
| br(Assembler::EQ, done); |
| } |
| |
| |
| // added to make this compile |
| |
| REGISTER_DEFINITION(Register, noreg); |
| |
| static void pass_arg0(MacroAssembler* masm, Register arg) { |
| if (c_rarg0 != arg ) { |
| masm->mov(c_rarg0, arg); |
| } |
| } |
| |
| static void pass_arg1(MacroAssembler* masm, Register arg) { |
| if (c_rarg1 != arg ) { |
| masm->mov(c_rarg1, arg); |
| } |
| } |
| |
| static void pass_arg2(MacroAssembler* masm, Register arg) { |
| if (c_rarg2 != arg ) { |
| masm->mov(c_rarg2, arg); |
| } |
| } |
| |
| static void pass_arg3(MacroAssembler* masm, Register arg) { |
| if (c_rarg3 != arg ) { |
| masm->mov(c_rarg3, arg); |
| } |
| } |
| |
| void MacroAssembler::call_VM_base(Register oop_result, |
| Register java_thread, |
| Register last_java_sp, |
| address entry_point, |
| int number_of_arguments, |
| bool check_exceptions) { |
| // determine java_thread register |
| if (!java_thread->is_valid()) { |
| java_thread = rthread; |
| } |
| |
| // determine last_java_sp register |
| if (!last_java_sp->is_valid()) { |
| last_java_sp = esp; |
| } |
| |
| // debugging support |
| assert(number_of_arguments >= 0 , "cannot have negative number of arguments"); |
| assert(java_thread == rthread, "unexpected register"); |
| #ifdef ASSERT |
| // TraceBytecodes does not use r12 but saves it over the call, so don't verify |
| // if ((UseCompressedOops || UseCompressedClassPointers) && !TraceBytecodes) verify_heapbase("call_VM_base: heap base corrupted?"); |
| #endif // ASSERT |
| |
| assert(java_thread != oop_result , "cannot use the same register for java_thread & oop_result"); |
| assert(java_thread != last_java_sp, "cannot use the same register for java_thread & last_java_sp"); |
| |
| // push java thread (becomes first argument of C function) |
| |
| mov(c_rarg0, java_thread); |
| |
| // set last Java frame before call |
| assert(last_java_sp != rfp, "can't use rfp"); |
| |
| Label l; |
| set_last_Java_frame(last_java_sp, rfp, l, rscratch1); |
| |
| // do the call, remove parameters |
| MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments, &l); |
| |
| // reset last Java frame |
| // Only interpreter should have to clear fp |
| reset_last_Java_frame(true, true); |
| |
| // C++ interp handles this in the interpreter |
| check_and_handle_popframe(java_thread); |
| check_and_handle_earlyret(java_thread); |
| |
| if (check_exceptions) { |
| // check for pending exceptions (java_thread is set upon return) |
| ldr(rscratch1, Address(java_thread, in_bytes(Thread::pending_exception_offset()))); |
| Label ok; |
| cbz(rscratch1, ok); |
| lea(rscratch1, RuntimeAddress(StubRoutines::forward_exception_entry())); |
| br(rscratch1); |
| bind(ok); |
| } |
| |
| // get oop result if there is one and reset the value in the thread |
| if (oop_result->is_valid()) { |
| get_vm_result(oop_result, java_thread); |
| } |
| } |
| |
| void MacroAssembler::call_VM_helper(Register oop_result, address entry_point, int number_of_arguments, bool check_exceptions) { |
| call_VM_base(oop_result, noreg, noreg, entry_point, number_of_arguments, check_exceptions); |
| } |
| |
| // Maybe emit a call via a trampoline. If the code cache is small |
| // trampolines won't be emitted. |
| |
| address MacroAssembler::trampoline_call(Address entry, CodeBuffer *cbuf) { |
| assert(entry.rspec().type() == relocInfo::runtime_call_type |
| || entry.rspec().type() == relocInfo::opt_virtual_call_type |
| || entry.rspec().type() == relocInfo::static_call_type |
| || entry.rspec().type() == relocInfo::virtual_call_type, "wrong reloc type"); |
| |
| unsigned int start_offset = offset(); |
| if (far_branches() && !Compile::current()->in_scratch_emit_size()) { |
| address stub = emit_trampoline_stub(start_offset, entry.target()); |
| if (stub == NULL) { |
| return NULL; // CodeCache is full |
| } |
| } |
| |
| if (cbuf) cbuf->set_insts_mark(); |
| relocate(entry.rspec()); |
| if (!far_branches()) { |
| bl(entry.target()); |
| } else { |
| bl(pc()); |
| } |
| // just need to return a non-null address |
| return pc(); |
| } |
| |
| |
| // Emit a trampoline stub for a call to a target which is too far away. |
| // |
| // code sequences: |
| // |
| // call-site: |
| // branch-and-link to <destination> or <trampoline stub> |
| // |
| // Related trampoline stub for this call site in the stub section: |
| // load the call target from the constant pool |
| // branch (LR still points to the call site above) |
| |
| address MacroAssembler::emit_trampoline_stub(int insts_call_instruction_offset, |
| address dest) { |
| address stub = start_a_stub(Compile::MAX_stubs_size/2); |
| if (stub == NULL) { |
| return NULL; // CodeBuffer::expand failed |
| } |
| |
| // Create a trampoline stub relocation which relates this trampoline stub |
| // with the call instruction at insts_call_instruction_offset in the |
| // instructions code-section. |
| align(wordSize); |
| relocate(trampoline_stub_Relocation::spec(code()->insts()->start() |
| + insts_call_instruction_offset)); |
| const int stub_start_offset = offset(); |
| |
| // Now, create the trampoline stub's code: |
| // - load the call |
| // - call |
| Label target; |
| ldr(rscratch1, target); |
| br(rscratch1); |
| bind(target); |
| assert(offset() - stub_start_offset == NativeCallTrampolineStub::data_offset, |
| "should be"); |
| emit_int64((int64_t)dest); |
| |
| const address stub_start_addr = addr_at(stub_start_offset); |
| |
| assert(is_NativeCallTrampolineStub_at(stub_start_addr), "doesn't look like a trampoline"); |
| |
| end_a_stub(); |
| return stub; |
| } |
| |
| address MacroAssembler::ic_call(address entry, jint method_index) { |
| RelocationHolder rh = virtual_call_Relocation::spec(pc(), method_index); |
| // address const_ptr = long_constant((jlong)Universe::non_oop_word()); |
| // unsigned long offset; |
| // ldr_constant(rscratch2, const_ptr); |
| movptr(rscratch2, (uintptr_t)Universe::non_oop_word()); |
| return trampoline_call(Address(entry, rh)); |
| } |
| |
| // Implementation of call_VM versions |
| |
| void MacroAssembler::call_VM(Register oop_result, |
| address entry_point, |
| bool check_exceptions) { |
| call_VM_helper(oop_result, entry_point, 0, check_exceptions); |
| } |
| |
| void MacroAssembler::call_VM(Register oop_result, |
| address entry_point, |
| Register arg_1, |
| bool check_exceptions) { |
| pass_arg1(this, arg_1); |
| call_VM_helper(oop_result, entry_point, 1, check_exceptions); |
| } |
| |
| void MacroAssembler::call_VM(Register oop_result, |
| address entry_point, |
| Register arg_1, |
| Register arg_2, |
| bool check_exceptions) { |
| assert(arg_1 != c_rarg2, "smashed arg"); |
| pass_arg2(this, arg_2); |
| pass_arg1(this, arg_1); |
| call_VM_helper(oop_result, entry_point, 2, check_exceptions); |
| } |
| |
| void MacroAssembler::call_VM(Register oop_result, |
| address entry_point, |
| Register arg_1, |
| Register arg_2, |
| Register arg_3, |
| bool check_exceptions) { |
| assert(arg_1 != c_rarg3, "smashed arg"); |
| assert(arg_2 != c_rarg3, "smashed arg"); |
| pass_arg3(this, arg_3); |
| |
| assert(arg_1 != c_rarg2, "smashed arg"); |
| pass_arg2(this, arg_2); |
| |
| pass_arg1(this, arg_1); |
| call_VM_helper(oop_result, entry_point, 3, check_exceptions); |
| } |
| |
| void MacroAssembler::call_VM(Register oop_result, |
| Register last_java_sp, |
| address entry_point, |
| int number_of_arguments, |
| bool check_exceptions) { |
| call_VM_base(oop_result, rthread, last_java_sp, entry_point, number_of_arguments, check_exceptions); |
| } |
| |
| void MacroAssembler::call_VM(Register oop_result, |
| Register last_java_sp, |
| address entry_point, |
| Register arg_1, |
| bool check_exceptions) { |
| pass_arg1(this, arg_1); |
| call_VM(oop_result, last_java_sp, entry_point, 1, check_exceptions); |
| } |
| |
| void MacroAssembler::call_VM(Register oop_result, |
| Register last_java_sp, |
| address entry_point, |
| Register arg_1, |
| Register arg_2, |
| bool check_exceptions) { |
| |
| assert(arg_1 != c_rarg2, "smashed arg"); |
| pass_arg2(this, arg_2); |
| pass_arg1(this, arg_1); |
| call_VM(oop_result, last_java_sp, entry_point, 2, check_exceptions); |
| } |
| |
| void MacroAssembler::call_VM(Register oop_result, |
| Register last_java_sp, |
| address entry_point, |
| Register arg_1, |
| Register arg_2, |
| Register arg_3, |
| bool check_exceptions) { |
| assert(arg_1 != c_rarg3, "smashed arg"); |
| assert(arg_2 != c_rarg3, "smashed arg"); |
| pass_arg3(this, arg_3); |
| assert(arg_1 != c_rarg2, "smashed arg"); |
| pass_arg2(this, arg_2); |
| pass_arg1(this, arg_1); |
| call_VM(oop_result, last_java_sp, entry_point, 3, check_exceptions); |
| } |
| |
| |
| void MacroAssembler::get_vm_result(Register oop_result, Register java_thread) { |
| ldr(oop_result, Address(java_thread, JavaThread::vm_result_offset())); |
| str(zr, Address(java_thread, JavaThread::vm_result_offset())); |
| verify_oop(oop_result, "broken oop in call_VM_base"); |
| } |
| |
| void MacroAssembler::get_vm_result_2(Register metadata_result, Register java_thread) { |
| ldr(metadata_result, Address(java_thread, JavaThread::vm_result_2_offset())); |
| str(zr, Address(java_thread, JavaThread::vm_result_2_offset())); |
| } |
| |
| void MacroAssembler::align(int modulus) { |
| while (offset() % modulus != 0) nop(); |
| } |
| |
| // these are no-ops overridden by InterpreterMacroAssembler |
| |
| void MacroAssembler::check_and_handle_earlyret(Register java_thread) { } |
| |
| void MacroAssembler::check_and_handle_popframe(Register java_thread) { } |
| |
| |
| RegisterOrConstant MacroAssembler::delayed_value_impl(intptr_t* delayed_value_addr, |
| Register tmp, |
| int offset) { |
| intptr_t value = *delayed_value_addr; |
| if (value != 0) |
| return RegisterOrConstant(value + offset); |
| |
| // load indirectly to solve generation ordering problem |
| ldr(tmp, ExternalAddress((address) delayed_value_addr)); |
| |
| if (offset != 0) |
| add(tmp, tmp, offset); |
| |
| return RegisterOrConstant(tmp); |
| } |
| |
| |
| void MacroAssembler:: notify(int type) { |
| if (type == bytecode_start) { |
| // set_last_Java_frame(esp, rfp, (address)NULL); |
| Assembler:: notify(type); |
| // reset_last_Java_frame(true, false); |
| } |
| else |
| Assembler:: notify(type); |
| } |
| |
| // Look up the method for a megamorphic invokeinterface call. |
| // The target method is determined by <intf_klass, itable_index>. |
| // The receiver klass is in recv_klass. |
| // On success, the result will be in method_result, and execution falls through. |
| // On failure, execution transfers to the given label. |
| void MacroAssembler::lookup_interface_method(Register recv_klass, |
| Register intf_klass, |
| RegisterOrConstant itable_index, |
| Register method_result, |
| Register scan_temp, |
| Label& L_no_such_interface) { |
| assert_different_registers(recv_klass, intf_klass, method_result, scan_temp); |
| assert(itable_index.is_constant() || itable_index.as_register() == method_result, |
| "caller must use same register for non-constant itable index as for method"); |
| |
| // Compute start of first itableOffsetEntry (which is at the end of the vtable) |
| int vtable_base = in_bytes(Klass::vtable_start_offset()); |
| int itentry_off = itableMethodEntry::method_offset_in_bytes(); |
| int scan_step = itableOffsetEntry::size() * wordSize; |
| int vte_size = vtableEntry::size_in_bytes(); |
| assert(vte_size == wordSize, "else adjust times_vte_scale"); |
| |
| ldrw(scan_temp, Address(recv_klass, Klass::vtable_length_offset())); |
| |
| // %%% Could store the aligned, prescaled offset in the klassoop. |
| // lea(scan_temp, Address(recv_klass, scan_temp, times_vte_scale, vtable_base)); |
| lea(scan_temp, Address(recv_klass, scan_temp, Address::lsl(3))); |
| add(scan_temp, scan_temp, vtable_base); |
| |
| // Adjust recv_klass by scaled itable_index, so we can free itable_index. |
| assert(itableMethodEntry::size() * wordSize == wordSize, "adjust the scaling in the code below"); |
| // lea(recv_klass, Address(recv_klass, itable_index, Address::times_ptr, itentry_off)); |
| lea(recv_klass, Address(recv_klass, itable_index, Address::lsl(3))); |
| if (itentry_off) |
| add(recv_klass, recv_klass, itentry_off); |
| |
| // for (scan = klass->itable(); scan->interface() != NULL; scan += scan_step) { |
| // if (scan->interface() == intf) { |
| // result = (klass + scan->offset() + itable_index); |
| // } |
| // } |
| Label search, found_method; |
| |
| for (int peel = 1; peel >= 0; peel--) { |
| ldr(method_result, Address(scan_temp, itableOffsetEntry::interface_offset_in_bytes())); |
| cmp(intf_klass, method_result); |
| |
| if (peel) { |
| br(Assembler::EQ, found_method); |
| } else { |
| br(Assembler::NE, search); |
| // (invert the test to fall through to found_method...) |
| } |
| |
| if (!peel) break; |
| |
| bind(search); |
| |
| // Check that the previous entry is non-null. A null entry means that |
| // the receiver class doesn't implement the interface, and wasn't the |
| // same as when the caller was compiled. |
| cbz(method_result, L_no_such_interface); |
| add(scan_temp, scan_temp, scan_step); |
| } |
| |
| bind(found_method); |
| |
| // Got a hit. |
| ldr(scan_temp, Address(scan_temp, itableOffsetEntry::offset_offset_in_bytes())); |
| ldr(method_result, Address(recv_klass, scan_temp)); |
| } |
| |
| // virtual method calling |
| void MacroAssembler::lookup_virtual_method(Register recv_klass, |
| RegisterOrConstant vtable_index, |
| Register method_result) { |
| const int base = in_bytes(Klass::vtable_start_offset()); |
| assert(vtableEntry::size() * wordSize == 8, |
| "adjust the scaling in the code below"); |
| int vtable_offset_in_bytes = base + vtableEntry::method_offset_in_bytes(); |
| |
| if (vtable_index.is_register()) { |
| lea(method_result, Address(recv_klass, |
| vtable_index.as_register(), |
| Address::lsl(LogBytesPerWord))); |
| ldr(method_result, Address(method_result, vtable_offset_in_bytes)); |
| } else { |
| vtable_offset_in_bytes += vtable_index.as_constant() * wordSize; |
| ldr(method_result, Address(recv_klass, vtable_offset_in_bytes)); |
| } |
| } |
| |
| void MacroAssembler::check_klass_subtype(Register sub_klass, |
| Register super_klass, |
| Register temp_reg, |
| Label& L_success) { |
| Label L_failure; |
| check_klass_subtype_fast_path(sub_klass, super_klass, temp_reg, &L_success, &L_failure, NULL); |
| check_klass_subtype_slow_path(sub_klass, super_klass, temp_reg, noreg, &L_success, NULL); |
| bind(L_failure); |
| } |
| |
| |
| void MacroAssembler::check_klass_subtype_fast_path(Register sub_klass, |
| Register super_klass, |
| Register temp_reg, |
| Label* L_success, |
| Label* L_failure, |
| Label* L_slow_path, |
| RegisterOrConstant super_check_offset) { |
| assert_different_registers(sub_klass, super_klass, temp_reg); |
| bool must_load_sco = (super_check_offset.constant_or_zero() == -1); |
| if (super_check_offset.is_register()) { |
| assert_different_registers(sub_klass, super_klass, |
| super_check_offset.as_register()); |
| } else if (must_load_sco) { |
| assert(temp_reg != noreg, "supply either a temp or a register offset"); |
| } |
| |
| Label L_fallthrough; |
| int label_nulls = 0; |
| if (L_success == NULL) { L_success = &L_fallthrough; label_nulls++; } |
| if (L_failure == NULL) { L_failure = &L_fallthrough; label_nulls++; } |
| if (L_slow_path == NULL) { L_slow_path = &L_fallthrough; label_nulls++; } |
| assert(label_nulls <= 1, "at most one NULL in the batch"); |
| |
| int sc_offset = in_bytes(Klass::secondary_super_cache_offset()); |
| int sco_offset = in_bytes(Klass::super_check_offset_offset()); |
| Address super_check_offset_addr(super_klass, sco_offset); |
| |
| // Hacked jmp, which may only be used just before L_fallthrough. |
| #define final_jmp(label) \ |
| if (&(label) == &L_fallthrough) { /*do nothing*/ } \ |
| else b(label) /*omit semi*/ |
| |
| // If the pointers are equal, we are done (e.g., String[] elements). |
| // This self-check enables sharing of secondary supertype arrays among |
| // non-primary types such as array-of-interface. Otherwise, each such |
| // type would need its own customized SSA. |
| // We move this check to the front of the fast path because many |
| // type checks are in fact trivially successful in this manner, |
| // so we get a nicely predicted branch right at the start of the check. |
| cmp(sub_klass, super_klass); |
| br(Assembler::EQ, *L_success); |
| |
| // Check the supertype display: |
| if (must_load_sco) { |
| ldrw(temp_reg, super_check_offset_addr); |
| super_check_offset = RegisterOrConstant(temp_reg); |
| } |
| Address super_check_addr(sub_klass, super_check_offset); |
| ldr(rscratch1, super_check_addr); |
| cmp(super_klass, rscratch1); // load displayed supertype |
| |
| // This check has worked decisively for primary supers. |
| // Secondary supers are sought in the super_cache ('super_cache_addr'). |
| // (Secondary supers are interfaces and very deeply nested subtypes.) |
| // This works in the same check above because of a tricky aliasing |
| // between the super_cache and the primary super display elements. |
| // (The 'super_check_addr' can address either, as the case requires.) |
| // Note that the cache is updated below if it does not help us find |
| // what we need immediately. |
| // So if it was a primary super, we can just fail immediately. |
| // Otherwise, it's the slow path for us (no success at this point). |
| |
| if (super_check_offset.is_register()) { |
| br(Assembler::EQ, *L_success); |
| cmp(super_check_offset.as_register(), sc_offset); |
| if (L_failure == &L_fallthrough) { |
| br(Assembler::EQ, *L_slow_path); |
| } else { |
| br(Assembler::NE, *L_failure); |
| final_jmp(*L_slow_path); |
| } |
| } else if (super_check_offset.as_constant() == sc_offset) { |
| // Need a slow path; fast failure is impossible. |
| if (L_slow_path == &L_fallthrough) { |
| br(Assembler::EQ, *L_success); |
| } else { |
| br(Assembler::NE, *L_slow_path); |
| final_jmp(*L_success); |
| } |
| } else { |
| // No slow path; it's a fast decision. |
| if (L_failure == &L_fallthrough) { |
| br(Assembler::EQ, *L_success); |
| } else { |
| br(Assembler::NE, *L_failure); |
| final_jmp(*L_success); |
| } |
| } |
| |
| bind(L_fallthrough); |
| |
| #undef final_jmp |
| } |
| |
| // These two are taken from x86, but they look generally useful |
| |
| // scans count pointer sized words at [addr] for occurence of value, |
| // generic |
| void MacroAssembler::repne_scan(Register addr, Register value, Register count, |
| Register scratch) { |
| Label Lloop, Lexit; |
| cbz(count, Lexit); |
| bind(Lloop); |
| ldr(scratch, post(addr, wordSize)); |
| cmp(value, scratch); |
| br(EQ, Lexit); |
| sub(count, count, 1); |
| cbnz(count, Lloop); |
| bind(Lexit); |
| } |
| |
| // scans count 4 byte words at [addr] for occurence of value, |
| // generic |
| void MacroAssembler::repne_scanw(Register addr, Register value, Register count, |
| Register scratch) { |
| Label Lloop, Lexit; |
| cbz(count, Lexit); |
| bind(Lloop); |
| ldrw(scratch, post(addr, wordSize)); |
| cmpw(value, scratch); |
| br(EQ, Lexit); |
| sub(count, count, 1); |
| cbnz(count, Lloop); |
| bind(Lexit); |
| } |
| |
| void MacroAssembler::check_klass_subtype_slow_path(Register sub_klass, |
| Register super_klass, |
| Register temp_reg, |
| Register temp2_reg, |
| Label* L_success, |
| Label* L_failure, |
| bool set_cond_codes) { |
| assert_different_registers(sub_klass, super_klass, temp_reg); |
| if (temp2_reg != noreg) |
| assert_different_registers(sub_klass, super_klass, temp_reg, temp2_reg, rscratch1); |
| #define IS_A_TEMP(reg) ((reg) == temp_reg || (reg) == temp2_reg) |
| |
| Label L_fallthrough; |
| int label_nulls = 0; |
| if (L_success == NULL) { L_success = &L_fallthrough; label_nulls++; } |
| if (L_failure == NULL) { L_failure = &L_fallthrough; label_nulls++; } |
| assert(label_nulls <= 1, "at most one NULL in the batch"); |
| |
| // a couple of useful fields in sub_klass: |
| int ss_offset = in_bytes(Klass::secondary_supers_offset()); |
| int sc_offset = in_bytes(Klass::secondary_super_cache_offset()); |
| Address secondary_supers_addr(sub_klass, ss_offset); |
| Address super_cache_addr( sub_klass, sc_offset); |
| |
| BLOCK_COMMENT("check_klass_subtype_slow_path"); |
| |
| // Do a linear scan of the secondary super-klass chain. |
| // This code is rarely used, so simplicity is a virtue here. |
| // The repne_scan instruction uses fixed registers, which we must spill. |
| // Don't worry too much about pre-existing connections with the input regs. |
| |
| assert(sub_klass != r0, "killed reg"); // killed by mov(r0, super) |
| assert(sub_klass != r2, "killed reg"); // killed by lea(r2, &pst_counter) |
| |
| // Get super_klass value into r0 (even if it was in r5 or r2). |
| RegSet pushed_registers; |
| if (!IS_A_TEMP(r2)) pushed_registers += r2; |
| if (!IS_A_TEMP(r5)) pushed_registers += r5; |
| |
| if (super_klass != r0 || UseCompressedOops) { |
| if (!IS_A_TEMP(r0)) pushed_registers += r0; |
| } |
| |
| push(pushed_registers, sp); |
| |
| #ifndef PRODUCT |
| mov(rscratch2, (address)&SharedRuntime::_partial_subtype_ctr); |
| Address pst_counter_addr(rscratch2); |
| ldr(rscratch1, pst_counter_addr); |
| add(rscratch1, rscratch1, 1); |
| str(rscratch1, pst_counter_addr); |
| #endif //PRODUCT |
| |
| // We will consult the secondary-super array. |
| ldr(r5, secondary_supers_addr); |
| // Load the array length. |
| ldrw(r2, Address(r5, Array<Klass*>::length_offset_in_bytes())); |
| // Skip to start of data. |
| add(r5, r5, Array<Klass*>::base_offset_in_bytes()); |
| |
| cmp(sp, zr); // Clear Z flag; SP is never zero |
| // Scan R2 words at [R5] for an occurrence of R0. |
| // Set NZ/Z based on last compare. |
| repne_scan(r5, r0, r2, rscratch1); |
| |
| // Unspill the temp. registers: |
| pop(pushed_registers, sp); |
| |
| br(Assembler::NE, *L_failure); |
| |
| // Success. Cache the super we found and proceed in triumph. |
| str(super_klass, super_cache_addr); |
| |
| if (L_success != &L_fallthrough) { |
| b(*L_success); |
| } |
| |
| #undef IS_A_TEMP |
| |
| bind(L_fallthrough); |
| } |
| |
| |
| void MacroAssembler::verify_oop(Register reg, const char* s) { |
| if (!VerifyOops) return; |
| |
| // Pass register number to verify_oop_subroutine |
| const char* b = NULL; |
| { |
| ResourceMark rm; |
| stringStream ss; |
| ss.print("verify_oop: %s: %s", reg->name(), s); |
| b = code_string(ss.as_string()); |
| } |
| BLOCK_COMMENT("verify_oop {"); |
| |
| stp(r0, rscratch1, Address(pre(sp, -2 * wordSize))); |
| stp(rscratch2, lr, Address(pre(sp, -2 * wordSize))); |
| |
| mov(r0, reg); |
| mov(rscratch1, (address)b); |
| |
| // call indirectly to solve generation ordering problem |
| lea(rscratch2, ExternalAddress(StubRoutines::verify_oop_subroutine_entry_address())); |
| ldr(rscratch2, Address(rscratch2)); |
| blr(rscratch2); |
| |
| ldp(rscratch2, lr, Address(post(sp, 2 * wordSize))); |
| ldp(r0, rscratch1, Address(post(sp, 2 * wordSize))); |
| |
| BLOCK_COMMENT("} verify_oop"); |
| } |
| |
| void MacroAssembler::verify_oop_addr(Address addr, const char* s) { |
| if (!VerifyOops) return; |
| |
| const char* b = NULL; |
| { |
| ResourceMark rm; |
| stringStream ss; |
| ss.print("verify_oop_addr: %s", s); |
| b = code_string(ss.as_string()); |
| } |
| BLOCK_COMMENT("verify_oop_addr {"); |
| |
| stp(r0, rscratch1, Address(pre(sp, -2 * wordSize))); |
| stp(rscratch2, lr, Address(pre(sp, -2 * wordSize))); |
| |
| // addr may contain sp so we will have to adjust it based on the |
| // pushes that we just did. |
| if (addr.uses(sp)) { |
| lea(r0, addr); |
| ldr(r0, Address(r0, 4 * wordSize)); |
| } else { |
| ldr(r0, addr); |
| } |
| mov(rscratch1, (address)b); |
| |
| // call indirectly to solve generation ordering problem |
| lea(rscratch2, ExternalAddress(StubRoutines::verify_oop_subroutine_entry_address())); |
| ldr(rscratch2, Address(rscratch2)); |
| blr(rscratch2); |
| |
| ldp(rscratch2, lr, Address(post(sp, 2 * wordSize))); |
| ldp(r0, rscratch1, Address(post(sp, 2 * wordSize))); |
| |
| BLOCK_COMMENT("} verify_oop_addr"); |
| } |
| |
| Address MacroAssembler::argument_address(RegisterOrConstant arg_slot, |
| int extra_slot_offset) { |
| // cf. TemplateTable::prepare_invoke(), if (load_receiver). |
| int stackElementSize = Interpreter::stackElementSize; |
| int offset = Interpreter::expr_offset_in_bytes(extra_slot_offset+0); |
| #ifdef ASSERT |
| int offset1 = Interpreter::expr_offset_in_bytes(extra_slot_offset+1); |
| assert(offset1 - offset == stackElementSize, "correct arithmetic"); |
| #endif |
| if (arg_slot.is_constant()) { |
| return Address(esp, arg_slot.as_constant() * stackElementSize |
| + offset); |
| } else { |
| add(rscratch1, esp, arg_slot.as_register(), |
| ext::uxtx, exact_log2(stackElementSize)); |
| return Address(rscratch1, offset); |
| } |
| } |
| |
| void MacroAssembler::call_VM_leaf_base(address entry_point, |
| int number_of_arguments, |
| Label *retaddr) { |
| call_VM_leaf_base1(entry_point, number_of_arguments, 0, ret_type_integral, retaddr); |
| } |
| |
| void MacroAssembler::call_VM_leaf_base1(address entry_point, |
| int number_of_gp_arguments, |
| int number_of_fp_arguments, |
| ret_type type, |
| Label *retaddr) { |
| Label E, L; |
| |
| stp(rscratch1, rmethod, Address(pre(sp, -2 * wordSize))); |
| |
| // We add 1 to number_of_arguments because the thread in arg0 is |
| // not counted |
| mov(rscratch1, entry_point); |
| blrt(rscratch1, number_of_gp_arguments + 1, number_of_fp_arguments, type); |
| if (retaddr) |
| bind(*retaddr); |
| |
| ldp(rscratch1, rmethod, Address(post(sp, 2 * wordSize))); |
| maybe_isb(); |
| } |
| |
| void MacroAssembler::call_VM_leaf(address entry_point, int number_of_arguments) { |
| call_VM_leaf_base(entry_point, number_of_arguments); |
| } |
| |
| void MacroAssembler::call_VM_leaf(address entry_point, Register arg_0) { |
| pass_arg0(this, arg_0); |
| call_VM_leaf_base(entry_point, 1); |
| } |
| |
| void MacroAssembler::call_VM_leaf(address entry_point, Register arg_0, Register arg_1) { |
| pass_arg0(this, arg_0); |
| pass_arg1(this, arg_1); |
| call_VM_leaf_base(entry_point, 2); |
| } |
| |
| void MacroAssembler::call_VM_leaf(address entry_point, Register arg_0, |
| Register arg_1, Register arg_2) { |
| pass_arg0(this, arg_0); |
| pass_arg1(this, arg_1); |
| pass_arg2(this, arg_2); |
| call_VM_leaf_base(entry_point, 3); |
| } |
| |
| void MacroAssembler::super_call_VM_leaf(address entry_point, Register arg_0) { |
| pass_arg0(this, arg_0); |
| MacroAssembler::call_VM_leaf_base(entry_point, 1); |
| } |
| |
| void MacroAssembler::super_call_VM_leaf(address entry_point, Register arg_0, Register arg_1) { |
| |
| assert(arg_0 != c_rarg1, "smashed arg"); |
| pass_arg1(this, arg_1); |
| pass_arg0(this, arg_0); |
| MacroAssembler::call_VM_leaf_base(entry_point, 2); |
| } |
| |
| void MacroAssembler::super_call_VM_leaf(address entry_point, Register arg_0, Register arg_1, Register arg_2) { |
| assert(arg_0 != c_rarg2, "smashed arg"); |
| assert(arg_1 != c_rarg2, "smashed arg"); |
| pass_arg2(this, arg_2); |
| assert(arg_0 != c_rarg1, "smashed arg"); |
| pass_arg1(this, arg_1); |
| pass_arg0(this, arg_0); |
| MacroAssembler::call_VM_leaf_base(entry_point, 3); |
| } |
| |
| void MacroAssembler::super_call_VM_leaf(address entry_point, Register arg_0, Register arg_1, Register arg_2, Register arg_3) { |
| assert(arg_0 != c_rarg3, "smashed arg"); |
| assert(arg_1 != c_rarg3, "smashed arg"); |
| assert(arg_2 != c_rarg3, "smashed arg"); |
| pass_arg3(this, arg_3); |
| assert(arg_0 != c_rarg2, "smashed arg"); |
| assert(arg_1 != c_rarg2, "smashed arg"); |
| pass_arg2(this, arg_2); |
| assert(arg_0 != c_rarg1, "smashed arg"); |
| pass_arg1(this, arg_1); |
| pass_arg0(this, arg_0); |
| MacroAssembler::call_VM_leaf_base(entry_point, 4); |
| } |
| |
| void MacroAssembler::null_check(Register reg, int offset) { |
| if (needs_explicit_null_check(offset)) { |
| // provoke OS NULL exception if reg = NULL by |
| // accessing M[reg] w/o changing any registers |
| // NOTE: this is plenty to provoke a segv |
| ldr(zr, Address(reg)); |
| } else { |
| // nothing to do, (later) access of M[reg + offset] |
| // will provoke OS NULL exception if reg = NULL |
| } |
| } |
| |
| // MacroAssembler protected routines needed to implement |
| // public methods |
| |
| void MacroAssembler::mov(Register r, Address dest) { |
| code_section()->relocate(pc(), dest.rspec()); |
| u_int64_t imm64 = (u_int64_t)dest.target(); |
| movptr(r, imm64); |
| } |
| |
| // Move a constant pointer into r. In AArch64 mode the virtual |
| // address space is 48 bits in size, so we only need three |
| // instructions to create a patchable instruction sequence that can |
| // reach anywhere. |
| void MacroAssembler::movptr(Register r, uintptr_t imm64) { |
| #ifndef PRODUCT |
| { |
| char buffer[64]; |
| snprintf(buffer, sizeof(buffer), "0x%"PRIX64, imm64); |
| block_comment(buffer); |
| } |
| #endif |
| assert(imm64 < (1ul << 48), "48-bit overflow in address constant"); |
| movz(r, imm64 & 0xffff); |
| imm64 >>= 16; |
| movk(r, imm64 & 0xffff, 16); |
| imm64 >>= 16; |
| movk(r, imm64 & 0xffff, 32); |
| } |
| |
| // Macro to mov replicated immediate to vector register. |
| // Vd will get the following values for different arrangements in T |
| // imm32 == hex 000000gh T8B: Vd = ghghghghghghghgh |
| // imm32 == hex 000000gh T16B: Vd = ghghghghghghghghghghghghghghghgh |
| // imm32 == hex 0000efgh T4H: Vd = efghefghefghefgh |
| // imm32 == hex 0000efgh T8H: Vd = efghefghefghefghefghefghefghefgh |
| // imm32 == hex abcdefgh T2S: Vd = abcdefghabcdefgh |
| // imm32 == hex abcdefgh T4S: Vd = abcdefghabcdefghabcdefghabcdefgh |
| // T1D/T2D: invalid |
| void MacroAssembler::mov(FloatRegister Vd, SIMD_Arrangement T, u_int32_t imm32) { |
| assert(T != T1D && T != T2D, "invalid arrangement"); |
| if (T == T8B || T == T16B) { |
| assert((imm32 & ~0xff) == 0, "extraneous bits in unsigned imm32 (T8B/T16B)"); |
| movi(Vd, T, imm32 & 0xff, 0); |
| return; |
| } |
| u_int32_t nimm32 = ~imm32; |
| if (T == T4H || T == T8H) { |
| assert((imm32 & ~0xffff) == 0, "extraneous bits in unsigned imm32 (T4H/T8H)"); |
| imm32 &= 0xffff; |
| nimm32 &= 0xffff; |
| } |
| u_int32_t x = imm32; |
| int movi_cnt = 0; |
| int movn_cnt = 0; |
| while (x) { if (x & 0xff) movi_cnt++; x >>= 8; } |
| x = nimm32; |
| while (x) { if (x & 0xff) movn_cnt++; x >>= 8; } |
| if (movn_cnt < movi_cnt) imm32 = nimm32; |
| unsigned lsl = 0; |
| while (imm32 && (imm32 & 0xff) == 0) { lsl += 8; imm32 >>= 8; } |
| if (movn_cnt < movi_cnt) |
| mvni(Vd, T, imm32 & 0xff, lsl); |
| else |
| movi(Vd, T, imm32 & 0xff, lsl); |
| imm32 >>= 8; lsl += 8; |
| while (imm32) { |
| while ((imm32 & 0xff) == 0) { lsl += 8; imm32 >>= 8; } |
| if (movn_cnt < movi_cnt) |
| bici(Vd, T, imm32 & 0xff, lsl); |
| else |
| orri(Vd, T, imm32 & 0xff, lsl); |
| lsl += 8; imm32 >>= 8; |
| } |
| } |
| |
| void MacroAssembler::mov_immediate64(Register dst, u_int64_t imm64) |
| { |
| #ifndef PRODUCT |
| { |
| char buffer[64]; |
| snprintf(buffer, sizeof(buffer), "0x%"PRIX64, imm64); |
| block_comment(buffer); |
| } |
| #endif |
| if (operand_valid_for_logical_immediate(false, imm64)) { |
| orr(dst, zr, imm64); |
| } else { |
| // we can use a combination of MOVZ or MOVN with |
| // MOVK to build up the constant |
| u_int64_t imm_h[4]; |
| int zero_count = 0; |
| int neg_count = 0; |
| int i; |
| for (i = 0; i < 4; i++) { |
| imm_h[i] = ((imm64 >> (i * 16)) & 0xffffL); |
| if (imm_h[i] == 0) { |
| zero_count++; |
| } else if (imm_h[i] == 0xffffL) { |
| neg_count++; |
| } |
| } |
| if (zero_count == 4) { |
| // one MOVZ will do |
| movz(dst, 0); |
| } else if (neg_count == 4) { |
| // one MOVN will do |
| movn(dst, 0); |
| } else if (zero_count == 3) { |
| for (i = 0; i < 4; i++) { |
| if (imm_h[i] != 0L) { |
| movz(dst, (u_int32_t)imm_h[i], (i << 4)); |
| break; |
| } |
| } |
| } else if (neg_count == 3) { |
| // one MOVN will do |
| for (int i = 0; i < 4; i++) { |
| if (imm_h[i] != 0xffffL) { |
| movn(dst, (u_int32_t)imm_h[i] ^ 0xffffL, (i << 4)); |
| break; |
| } |
| } |
| } else if (zero_count == 2) { |
| // one MOVZ and one MOVK will do |
| for (i = 0; i < 3; i++) { |
| if (imm_h[i] != 0L) { |
| movz(dst, (u_int32_t)imm_h[i], (i << 4)); |
| i++; |
| break; |
| } |
| } |
| for (;i < 4; i++) { |
| if (imm_h[i] != 0L) { |
| movk(dst, (u_int32_t)imm_h[i], (i << 4)); |
| } |
| } |
| } else if (neg_count == 2) { |
| // one MOVN and one MOVK will do |
| for (i = 0; i < 4; i++) { |
| if (imm_h[i] != 0xffffL) { |
| movn(dst, (u_int32_t)imm_h[i] ^ 0xffffL, (i << 4)); |
| i++; |
| break; |
| } |
| } |
| for (;i < 4; i++) { |
| if (imm_h[i] != 0xffffL) { |
| movk(dst, (u_int32_t)imm_h[i], (i << 4)); |
| } |
| } |
| } else if (zero_count == 1) { |
| // one MOVZ and two MOVKs will do |
| for (i = 0; i < 4; i++) { |
| if (imm_h[i] != 0L) { |
| movz(dst, (u_int32_t)imm_h[i], (i << 4)); |
| i++; |
| break; |
| } |
| } |
| for (;i < 4; i++) { |
| if (imm_h[i] != 0x0L) { |
| movk(dst, (u_int32_t)imm_h[i], (i << 4)); |
| } |
| } |
| } else if (neg_count == 1) { |
| // one MOVN and two MOVKs will do |
| for (i = 0; i < 4; i++) { |
| if (imm_h[i] != 0xffffL) { |
| movn(dst, (u_int32_t)imm_h[i] ^ 0xffffL, (i << 4)); |
| i++; |
| break; |
| } |
| } |
| for (;i < 4; i++) { |
| if (imm_h[i] != 0xffffL) { |
| movk(dst, (u_int32_t)imm_h[i], (i << 4)); |
| } |
| } |
| } else { |
| // use a MOVZ and 3 MOVKs (makes it easier to debug) |
| movz(dst, (u_int32_t)imm_h[0], 0); |
| for (i = 1; i < 4; i++) { |
| movk(dst, (u_int32_t)imm_h[i], (i << 4)); |
| } |
| } |
| } |
| } |
| |
| void MacroAssembler::mov_immediate32(Register dst, u_int32_t imm32) |
| { |
| #ifndef PRODUCT |
| { |
| char buffer[64]; |
| snprintf(buffer, sizeof(buffer), "0x%"PRIX32, imm32); |
| block_comment(buffer); |
| } |
| #endif |
| if (operand_valid_for_logical_immediate(true, imm32)) { |
| orrw(dst, zr, imm32); |
| } else { |
| // we can use MOVZ, MOVN or two calls to MOVK to build up the |
| // constant |
| u_int32_t imm_h[2]; |
| imm_h[0] = imm32 & 0xffff; |
| imm_h[1] = ((imm32 >> 16) & 0xffff); |
| if (imm_h[0] == 0) { |
| movzw(dst, imm_h[1], 16); |
| } else if (imm_h[0] == 0xffff) { |
| movnw(dst, imm_h[1] ^ 0xffff, 16); |
| } else if (imm_h[1] == 0) { |
| movzw(dst, imm_h[0], 0); |
| } else if (imm_h[1] == 0xffff) { |
| movnw(dst, imm_h[0] ^ 0xffff, 0); |
| } else { |
| // use a MOVZ and MOVK (makes it easier to debug) |
| movzw(dst, imm_h[0], 0); |
| movkw(dst, imm_h[1], 16); |
| } |
| } |
| } |
| |
| // Form an address from base + offset in Rd. Rd may or may |
| // not actually be used: you must use the Address that is returned. |
| // It is up to you to ensure that the shift provided matches the size |
| // of your data. |
| Address MacroAssembler::form_address(Register Rd, Register base, long byte_offset, int shift) { |
| if (Address::offset_ok_for_immed(byte_offset, shift)) |
| // It fits; no need for any heroics |
| return Address(base, byte_offset); |
| |
| // Don't do anything clever with negative or misaligned offsets |
| unsigned mask = (1 << shift) - 1; |
| if (byte_offset < 0 || byte_offset & mask) { |
| mov(Rd, byte_offset); |
| add(Rd, base, Rd); |
| return Address(Rd); |
| } |
| |
| // See if we can do this with two 12-bit offsets |
| { |
| unsigned long word_offset = byte_offset >> shift; |
| unsigned long masked_offset = word_offset & 0xfff000; |
| if (Address::offset_ok_for_immed(word_offset - masked_offset) |
| && Assembler::operand_valid_for_add_sub_immediate(masked_offset << shift)) { |
| add(Rd, base, masked_offset << shift); |
| word_offset -= masked_offset; |
| return Address(Rd, word_offset << shift); |
| } |
| } |
| |
| // Do it the hard way |
| mov(Rd, byte_offset); |
| add(Rd, base, Rd); |
| return Address(Rd); |
| } |
| |
| void MacroAssembler::atomic_incw(Register counter_addr, Register tmp, Register tmp2) { |
| Label retry_load; |
| prfm(Address(counter_addr), PSTL1STRM); |
| bind(retry_load); |
| // flush and load exclusive from the memory location |
| ldxrw(tmp, counter_addr); |
| addw(tmp, tmp, 1); |
| // if we store+flush with no intervening write tmp wil be zero |
| stxrw(tmp2, tmp, counter_addr); |
| cbnzw(tmp2, retry_load); |
| } |
| |
| |
| int MacroAssembler::corrected_idivl(Register result, Register ra, Register rb, |
| bool want_remainder, Register scratch) |
| { |
| // Full implementation of Java idiv and irem. The function |
| // returns the (pc) offset of the div instruction - may be needed |
| // for implicit exceptions. |
| // |
| // constraint : ra/rb =/= scratch |
| // normal case |
| // |
| // input : ra: dividend |
| // rb: divisor |
| // |
| // result: either |
| // quotient (= ra idiv rb) |
| // remainder (= ra irem rb) |
| |
| assert(ra != scratch && rb != scratch, "reg cannot be scratch"); |
| |
| int idivl_offset = offset(); |
| if (! want_remainder) { |
| sdivw(result, ra, rb); |
| } else { |
| sdivw(scratch, ra, rb); |
| Assembler::msubw(result, scratch, rb, ra); |
| } |
| |
| return idivl_offset; |
| } |
| |
| int MacroAssembler::corrected_idivq(Register result, Register ra, Register rb, |
| bool want_remainder, Register scratch) |
| { |
| // Full implementation of Java ldiv and lrem. The function |
| // returns the (pc) offset of the div instruction - may be needed |
| // for implicit exceptions. |
| // |
| // constraint : ra/rb =/= scratch |
| // normal case |
| // |
| // input : ra: dividend |
| // rb: divisor |
| // |
| // result: either |
| // quotient (= ra idiv rb) |
| // remainder (= ra irem rb) |
| |
| assert(ra != scratch && rb != scratch, "reg cannot be scratch"); |
| |
| int idivq_offset = offset(); |
| if (! want_remainder) { |
| sdiv(result, ra, rb); |
| } else { |
| sdiv(scratch, ra, rb); |
| Assembler::msub(result, scratch, rb, ra); |
| } |
| |
| return idivq_offset; |
| } |
| |
| void MacroAssembler::membar(Membar_mask_bits order_constraint) { |
| address prev = pc() - NativeMembar::instruction_size; |
| if (prev == code()->last_membar()) { |
| NativeMembar *bar = NativeMembar_at(prev); |
| // We are merging two memory barrier instructions. On AArch64 we |
| // can do this simply by ORing them together. |
| bar->set_kind(bar->get_kind() | order_constraint); |
| BLOCK_COMMENT("merged membar"); |
| } else { |
| code()->set_last_membar(pc()); |
| dmb(Assembler::barrier(order_constraint)); |
| } |
| } |
| |
| // MacroAssembler routines found actually to be needed |
| |
| void MacroAssembler::push(Register src) |
| { |
| str(src, Address(pre(esp, -1 * wordSize))); |
| } |
| |
| void MacroAssembler::pop(Register dst) |
| { |
| ldr(dst, Address(post(esp, 1 * wordSize))); |
| } |
| |
| // Note: load_unsigned_short used to be called load_unsigned_word. |
| int MacroAssembler::load_unsigned_short(Register dst, Address src) { |
| int off = offset(); |
| ldrh(dst, src); |
| return off; |
| } |
| |
| int MacroAssembler::load_unsigned_byte(Register dst, Address src) { |
| int off = offset(); |
| ldrb(dst, src); |
| return off; |
| } |
| |
| int MacroAssembler::load_signed_short(Register dst, Address src) { |
| int off = offset(); |
| ldrsh(dst, src); |
| return off; |
| } |
| |
| int MacroAssembler::load_signed_byte(Register dst, Address src) { |
| int off = offset(); |
| ldrsb(dst, src); |
| return off; |
| } |
| |
| int MacroAssembler::load_signed_short32(Register dst, Address src) { |
| int off = offset(); |
| ldrshw(dst, src); |
| return off; |
| } |
| |
| int MacroAssembler::load_signed_byte32(Register dst, Address src) { |
| int off = offset(); |
| ldrsbw(dst, src); |
| return off; |
| } |
| |
| void MacroAssembler::load_sized_value(Register dst, Address src, size_t size_in_bytes, bool is_signed, Register dst2) { |
| switch (size_in_bytes) { |
| case 8: ldr(dst, src); break; |
| case 4: ldrw(dst, src); break; |
| case 2: is_signed ? load_signed_short(dst, src) : load_unsigned_short(dst, src); break; |
| case 1: is_signed ? load_signed_byte( dst, src) : load_unsigned_byte( dst, src); break; |
| default: ShouldNotReachHere(); |
| } |
| } |
| |
| void MacroAssembler::store_sized_value(Address dst, Register src, size_t size_in_bytes, Register src2) { |
| switch (size_in_bytes) { |
| case 8: str(src, dst); break; |
| case 4: strw(src, dst); break; |
| case 2: strh(src, dst); break; |
| case 1: strb(src, dst); break; |
| default: ShouldNotReachHere(); |
| } |
| } |
| |
| void MacroAssembler::decrementw(Register reg, int value) |
| { |
| if (value < 0) { incrementw(reg, -value); return; } |
| if (value == 0) { return; } |
| if (value < (1 << 12)) { subw(reg, reg, value); return; } |
| /* else */ { |
| guarantee(reg != rscratch2, "invalid dst for register decrement"); |
| movw(rscratch2, (unsigned)value); |
| subw(reg, reg, rscratch2); |
| } |
| } |
| |
| void MacroAssembler::decrement(Register reg, int value) |
| { |
| if (value < 0) { increment(reg, -value); return; } |
| if (value == 0) { return; } |
| if (value < (1 << 12)) { sub(reg, reg, value); return; } |
| /* else */ { |
| assert(reg != rscratch2, "invalid dst for register decrement"); |
| mov(rscratch2, (unsigned long)value); |
| sub(reg, reg, rscratch2); |
| } |
| } |
| |
| void MacroAssembler::decrementw(Address dst, int value) |
| { |
| assert(!dst.uses(rscratch1), "invalid dst for address decrement"); |
| ldrw(rscratch1, dst); |
| decrementw(rscratch1, value); |
| strw(rscratch1, dst); |
| } |
| |
| void MacroAssembler::decrement(Address dst, int value) |
| { |
| assert(!dst.uses(rscratch1), "invalid address for decrement"); |
| ldr(rscratch1, dst); |
| decrement(rscratch1, value); |
| str(rscratch1, dst); |
| } |
| |
| void MacroAssembler::incrementw(Register reg, int value) |
| { |
| if (value < 0) { decrementw(reg, -value); return; } |
| if (value == 0) { return; } |
| if (value < (1 << 12)) { addw(reg, reg, value); return; } |
| /* else */ { |
| assert(reg != rscratch2, "invalid dst for register increment"); |
| movw(rscratch2, (unsigned)value); |
| addw(reg, reg, rscratch2); |
| } |
| } |
| |
| void MacroAssembler::increment(Register reg, int value) |
| { |
| if (value < 0) { decrement(reg, -value); return; } |
| if (value == 0) { return; } |
| if (value < (1 << 12)) { add(reg, reg, value); return; } |
| /* else */ { |
| assert(reg != rscratch2, "invalid dst for register increment"); |
| movw(rscratch2, (unsigned)value); |
| add(reg, reg, rscratch2); |
| } |
| } |
| |
| void MacroAssembler::incrementw(Address dst, int value) |
| { |
| assert(!dst.uses(rscratch1), "invalid dst for address increment"); |
| ldrw(rscratch1, dst); |
| incrementw(rscratch1, value); |
| strw(rscratch1, dst); |
| } |
| |
| void MacroAssembler::increment(Address dst, int value) |
| { |
| assert(!dst.uses(rscratch1), "invalid dst for address increment"); |
| ldr(rscratch1, dst); |
| increment(rscratch1, value); |
| str(rscratch1, dst); |
| } |
| |
| |
| void MacroAssembler::pusha() { |
| push(0x7fffffff, sp); |
| } |
| |
| void MacroAssembler::popa() { |
| pop(0x7fffffff, sp); |
| } |
| |
| // Push lots of registers in the bit set supplied. Don't push sp. |
| // Return the number of words pushed |
| int MacroAssembler::push(unsigned int bitset, Register stack) { |
| int words_pushed = 0; |
| |
| // Scan bitset to accumulate register pairs |
| unsigned char regs[32]; |
| int count = 0; |
| for (int reg = 0; reg <= 30; reg++) { |
| if (1 & bitset) |
| regs[count++] = reg; |
| bitset >>= 1; |
| } |
| regs[count++] = zr->encoding_nocheck(); |
| count &= ~1; // Only push an even nuber of regs |
| |
| if (count) { |
| stp(as_Register(regs[0]), as_Register(regs[1]), |
| Address(pre(stack, -count * wordSize))); |
| words_pushed += 2; |
| } |
| for (int i = 2; i < count; i += 2) { |
| stp(as_Register(regs[i]), as_Register(regs[i+1]), |
| Address(stack, i * wordSize)); |
| words_pushed += 2; |
| } |
| |
| assert(words_pushed == count, "oops, pushed != count"); |
| |
| return count; |
| } |
| |
| int MacroAssembler::pop(unsigned int bitset, Register stack) { |
| int words_pushed = 0; |
| |
| // Scan bitset to accumulate register pairs |
| unsigned char regs[32]; |
| int count = 0; |
| for (int reg = 0; reg <= 30; reg++) { |
| if (1 & bitset) |
| regs[count++] = reg; |
| bitset >>= 1; |
| } |
| regs[count++] = zr->encoding_nocheck(); |
| count &= ~1; |
| |
| for (int i = 2; i < count; i += 2) { |
| ldp(as_Register(regs[i]), as_Register(regs[i+1]), |
| Address(stack, i * wordSize)); |
| words_pushed += 2; |
| } |
| if (count) { |
| ldp(as_Register(regs[0]), as_Register(regs[1]), |
| Address(post(stack, count * wordSize))); |
| words_pushed += 2; |
| } |
| |
| assert(words_pushed == count, "oops, pushed != count"); |
| |
| return count; |
| } |
| #ifdef ASSERT |
| void MacroAssembler::verify_heapbase(const char* msg) { |
| #if 0 |
| assert (UseCompressedOops || UseCompressedClassPointers, "should be compressed"); |
| assert (Universe::heap() != NULL, "java heap should be initialized"); |
| if (CheckCompressedOops) { |
| Label ok; |
| push(1 << rscratch1->encoding(), sp); // cmpptr trashes rscratch1 |
| cmpptr(rheapbase, ExternalAddress((address)Universe::narrow_ptrs_base_addr())); |
| br(Assembler::EQ, ok); |
| stop(msg); |
| bind(ok); |
| pop(1 << rscratch1->encoding(), sp); |
| } |
| #endif |
| } |
| #endif |
| |
| void MacroAssembler::stop(const char* msg) { |
| address ip = pc(); |
| pusha(); |
| mov(c_rarg0, (address)msg); |
| mov(c_rarg1, (address)ip); |
| mov(c_rarg2, sp); |
| mov(c_rarg3, CAST_FROM_FN_PTR(address, MacroAssembler::debug64)); |
| // call(c_rarg3); |
| blrt(c_rarg3, 3, 0, 1); |
| hlt(0); |
| } |
| |
| // If a constant does not fit in an immediate field, generate some |
| // number of MOV instructions and then perform the operation. |
| void MacroAssembler::wrap_add_sub_imm_insn(Register Rd, Register Rn, unsigned imm, |
| add_sub_imm_insn insn1, |
| add_sub_reg_insn insn2) { |
| assert(Rd != zr, "Rd = zr and not setting flags?"); |
| if (operand_valid_for_add_sub_immediate((int)imm)) { |
| (this->*insn1)(Rd, Rn, imm); |
| } else { |
| if (uabs(imm) < (1 << 24)) { |
| (this->*insn1)(Rd, Rn, imm & -(1 << 12)); |
| (this->*insn1)(Rd, Rd, imm & ((1 << 12)-1)); |
| } else { |
| assert_different_registers(Rd, Rn); |
| mov(Rd, (uint64_t)imm); |
| (this->*insn2)(Rd, Rn, Rd, LSL, 0); |
| } |
| } |
| } |
| |
| // Seperate vsn which sets the flags. Optimisations are more restricted |
| // because we must set the flags correctly. |
| void MacroAssembler::wrap_adds_subs_imm_insn(Register Rd, Register Rn, unsigned imm, |
| add_sub_imm_insn insn1, |
| add_sub_reg_insn insn2) { |
| if (operand_valid_for_add_sub_immediate((int)imm)) { |
| (this->*insn1)(Rd, Rn, imm); |
| } else { |
| assert_different_registers(Rd, Rn); |
| assert(Rd != zr, "overflow in immediate operand"); |
| mov(Rd, (uint64_t)imm); |
| (this->*insn2)(Rd, Rn, Rd, LSL, 0); |
| } |
| } |
| |
| |
| void MacroAssembler::add(Register Rd, Register Rn, RegisterOrConstant increment) { |
| if (increment.is_register()) { |
| add(Rd, Rn, increment.as_register()); |
| } else { |
| add(Rd, Rn, increment.as_constant()); |
| } |
| } |
| |
| void MacroAssembler::addw(Register Rd, Register Rn, RegisterOrConstant increment) { |
| if (increment.is_register()) { |
| addw(Rd, Rn, increment.as_register()); |
| } else { |
| addw(Rd, Rn, increment.as_constant()); |
| } |
| } |
| |
| void MacroAssembler::sub(Register Rd, Register Rn, RegisterOrConstant decrement) { |
| if (decrement.is_register()) { |
| sub(Rd, Rn, decrement.as_register()); |
| } else { |
| sub(Rd, Rn, decrement.as_constant()); |
| } |
| } |
| |
| void MacroAssembler::subw(Register Rd, Register Rn, RegisterOrConstant decrement) { |
| if (decrement.is_register()) { |
| subw(Rd, Rn, decrement.as_register()); |
| } else { |
| subw(Rd, Rn, decrement.as_constant()); |
| } |
| } |
| |
| void MacroAssembler::reinit_heapbase() |
| { |
| if (UseCompressedOops) { |
| if (Universe::is_fully_initialized()) { |
| mov(rheapbase, Universe::narrow_ptrs_base()); |
| } else { |
| lea(rheapbase, ExternalAddress((address)Universe::narrow_ptrs_base_addr())); |
| ldr(rheapbase, Address(rheapbase)); |
| } |
| } |
| } |
| |
| // this simulates the behaviour of the x86 cmpxchg instruction using a |
| // load linked/store conditional pair. we use the acquire/release |
| // versions of these instructions so that we flush pending writes as |
| // per Java semantics. |
| |
| // n.b the x86 version assumes the old value to be compared against is |
| // in rax and updates rax with the value located in memory if the |
| // cmpxchg fails. we supply a register for the old value explicitly |
| |
| // the aarch64 load linked/store conditional instructions do not |
| // accept an offset. so, unlike x86, we must provide a plain register |
| // to identify the memory word to be compared/exchanged rather than a |
| // register+offset Address. |
| |
| void MacroAssembler::cmpxchgptr(Register oldv, Register newv, Register addr, Register tmp, |
| Label &succeed, Label *fail) { |
| // oldv holds comparison value |
| // newv holds value to write in exchange |
| // addr identifies memory word to compare against/update |
| if (UseLSE) { |
| mov(tmp, oldv); |
| casal(Assembler::xword, oldv, newv, addr); |
| cmp(tmp, oldv); |
| br(Assembler::EQ, succeed); |
| membar(AnyAny); |
| } else { |
| Label retry_load, nope; |
| prfm(Address(addr), PSTL1STRM); |
| bind(retry_load); |
| // flush and load exclusive from the memory location |
| // and fail if it is not what we expect |
| ldaxr(tmp, addr); |
| cmp(tmp, oldv); |
| br(Assembler::NE, nope); |
| // if we store+flush with no intervening write tmp wil be zero |
| stlxr(tmp, newv, addr); |
| cbzw(tmp, succeed); |
| // retry so we only ever return after a load fails to compare |
| // ensures we don't return a stale value after a failed write. |
| b(retry_load); |
| // if the memory word differs we return it in oldv and signal a fail |
| bind(nope); |
| membar(AnyAny); |
| mov(oldv, tmp); |
| } |
| if (fail) |
| b(*fail); |
| } |
| |
| void MacroAssembler::cmpxchgw(Register oldv, Register newv, Register addr, Register tmp, |
| Label &succeed, Label *fail) { |
| // oldv holds comparison value |
| // newv holds value to write in exchange |
| // addr identifies memory word to compare against/update |
| // tmp returns 0/1 for success/failure |
| if (UseLSE) { |
| mov(tmp, oldv); |
| casal(Assembler::word, oldv, newv, addr); |
| cmp(tmp, oldv); |
| br(Assembler::EQ, succeed); |
| membar(AnyAny); |
| } else { |
| Label retry_load, nope; |
| prfm(Address(addr), PSTL1STRM); |
| bind(retry_load); |
| // flush and load exclusive from the memory location |
| // and fail if it is not what we expect |
| ldaxrw(tmp, addr); |
| cmp(tmp, oldv); |
| br(Assembler::NE, nope); |
| // if we store+flush with no intervening write tmp wil be zero |
| stlxrw(tmp, newv, addr); |
| cbzw(tmp, succeed); |
| // retry so we only ever return after a load fails to compare |
| // ensures we don't return a stale value after a failed write. |
| b(retry_load); |
| // if the memory word differs we return it in oldv and signal a fail |
| bind(nope); |
| membar(AnyAny); |
| mov(oldv, tmp); |
| } |
| if (fail) |
| b(*fail); |
| } |
| |
| // A generic CAS; success or failure is in the EQ flag. |
| void MacroAssembler::cmpxchg(Register addr, Register expected, |
| Register new_val, |
| enum operand_size size, |
| bool acquire, bool release, |
| Register tmp) { |
| if (UseLSE) { |
| mov(tmp, expected); |
| lse_cas(tmp, new_val, addr, size, acquire, release, /*not_pair*/ true); |
| cmp(tmp, expected); |
| } else { |
| BLOCK_COMMENT("cmpxchg {"); |
| Label retry_load, done; |
| prfm(Address(addr), PSTL1STRM); |
| bind(retry_load); |
| load_exclusive(tmp, addr, size, acquire); |
| if (size == xword) |
| cmp(tmp, expected); |
| else |
| cmpw(tmp, expected); |
| br(Assembler::NE, done); |
| store_exclusive(tmp, new_val, addr, size, release); |
| cbnzw(tmp, retry_load); |
| bind(done); |
| BLOCK_COMMENT("} cmpxchg"); |
| } |
| } |
| |
| static bool different(Register a, RegisterOrConstant b, Register c) { |
| if (b.is_constant()) |
| return a != c; |
| else |
| return a != b.as_register() && a != c && b.as_register() != c; |
| } |
| |
| #define ATOMIC_OP(LDXR, OP, IOP, STXR) \ |
| void MacroAssembler::atomic_##OP(Register prev, RegisterOrConstant incr, Register addr) { \ |
| Register result = rscratch2; \ |
| if (prev->is_valid()) \ |
| result = different(prev, incr, addr) ? prev : rscratch2; \ |
| \ |
| Label retry_load; \ |
| prfm(Address(addr), PSTL1STRM); \ |
| bind(retry_load); \ |
| LDXR(result, addr); \ |
| OP(rscratch1, result, incr); \ |
| STXR(rscratch2, rscratch1, addr); \ |
| cbnzw(rscratch2, retry_load); \ |
| if (prev->is_valid() && prev != result) { \ |
| IOP(prev, rscratch1, incr); \ |
| } \ |
| } |
| |
| ATOMIC_OP(ldxr, add, sub, stxr) |
| ATOMIC_OP(ldxrw, addw, subw, stxrw) |
| |
| #undef ATOMIC_OP |
| |
| #define ATOMIC_XCHG(OP, LDXR, STXR) \ |
| void MacroAssembler::atomic_##OP(Register prev, Register newv, Register addr) { \ |
| Register result = rscratch2; \ |
| if (prev->is_valid()) \ |
| result = different(prev, newv, addr) ? prev : rscratch2; \ |
| \ |
| Label retry_load; \ |
| prfm(Address(addr), PSTL1STRM); \ |
| bind(retry_load); \ |
| LDXR(result, addr); \ |
| STXR(rscratch1, newv, addr); \ |
| cbnzw(rscratch1, retry_load); \ |
| if (prev->is_valid() && prev != result) \ |
| mov(prev, result); \ |
| } |
| |
| ATOMIC_XCHG(xchg, ldxr, stxr) |
| ATOMIC_XCHG(xchgw, ldxrw, stxrw) |
| |
| #undef ATOMIC_XCHG |
| |
| void MacroAssembler::incr_allocated_bytes(Register thread, |
| Register var_size_in_bytes, |
| int con_size_in_bytes, |
| Register t1) { |
| if (!thread->is_valid()) { |
| thread = rthread; |
| } |
| assert(t1->is_valid(), "need temp reg"); |
| |
| ldr(t1, Address(thread, in_bytes(JavaThread::allocated_bytes_offset()))); |
| if (var_size_in_bytes->is_valid()) { |
| add(t1, t1, var_size_in_bytes); |
| } else { |
| add(t1, t1, con_size_in_bytes); |
| } |
| str(t1, Address(thread, in_bytes(JavaThread::allocated_bytes_offset()))); |
| } |
| |
| #ifndef PRODUCT |
| extern "C" void findpc(intptr_t x); |
| #endif |
| |
| void MacroAssembler::debug64(char* msg, int64_t pc, int64_t regs[]) |
| { |
| // In order to get locks to work, we need to fake a in_VM state |
| if (ShowMessageBoxOnError ) { |
| JavaThread* thread = JavaThread::current(); |
| JavaThreadState saved_state = thread->thread_state(); |
| thread->set_thread_state(_thread_in_vm); |
| #ifndef PRODUCT |
| if (CountBytecodes || TraceBytecodes || StopInterpreterAt) { |
| ttyLocker ttyl; |
| BytecodeCounter::print(); |
| } |
| #endif |
| if (os::message_box(msg, "Execution stopped, print registers?")) { |
| ttyLocker ttyl; |
| tty->print_cr(" pc = 0x%016lx", pc); |
| #ifndef PRODUCT |
| tty->cr(); |
| findpc(pc); |
| tty->cr(); |
| #endif |
| tty->print_cr(" r0 = 0x%016lx", regs[0]); |
| tty->print_cr(" r1 = 0x%016lx", regs[1]); |
| tty->print_cr(" r2 = 0x%016lx", regs[2]); |
| tty->print_cr(" r3 = 0x%016lx", regs[3]); |
| tty->print_cr(" r4 = 0x%016lx", regs[4]); |
| tty->print_cr(" r5 = 0x%016lx", regs[5]); |
| tty->print_cr(" r6 = 0x%016lx", regs[6]); |
| tty->print_cr(" r7 = 0x%016lx", regs[7]); |
| tty->print_cr(" r8 = 0x%016lx", regs[8]); |
| tty->print_cr(" r9 = 0x%016lx", regs[9]); |
| tty->print_cr("r10 = 0x%016lx", regs[10]); |
| tty->print_cr("r11 = 0x%016lx", regs[11]); |
| tty->print_cr("r12 = 0x%016lx", regs[12]); |
| tty->print_cr("r13 = 0x%016lx", regs[13]); |
| tty->print_cr("r14 = 0x%016lx", regs[14]); |
| tty->print_cr("r15 = 0x%016lx", regs[15]); |
| tty->print_cr("r16 = 0x%016lx", regs[16]); |
| tty->print_cr("r17 = 0x%016lx", regs[17]); |
| tty->print_cr("r18 = 0x%016lx", regs[18]); |
| tty->print_cr("r19 = 0x%016lx", regs[19]); |
| tty->print_cr("r20 = 0x%016lx", regs[20]); |
| tty->print_cr("r21 = 0x%016lx", regs[21]); |
| tty->print_cr("r22 = 0x%016lx", regs[22]); |
| tty->print_cr("r23 = 0x%016lx", regs[23]); |
| tty->print_cr("r24 = 0x%016lx", regs[24]); |
| tty->print_cr("r25 = 0x%016lx", regs[25]); |
| tty->print_cr("r26 = 0x%016lx", regs[26]); |
| tty->print_cr("r27 = 0x%016lx", regs[27]); |
| tty->print_cr("r28 = 0x%016lx", regs[28]); |
| tty->print_cr("r30 = 0x%016lx", regs[30]); |
| tty->print_cr("r31 = 0x%016lx", regs[31]); |
| BREAKPOINT; |
| } |
| ThreadStateTransition::transition(thread, _thread_in_vm, saved_state); |
| } else { |
| ttyLocker ttyl; |
| ::tty->print_cr("=============== DEBUG MESSAGE: %s ================\n", |
| msg); |
| assert(false, "DEBUG MESSAGE: %s", msg); |
| } |
| } |
| |
| #ifdef BUILTIN_SIM |
| // routine to generate an x86 prolog for a stub function which |
| // bootstraps into the generated ARM code which directly follows the |
| // stub |
| // |
| // the argument encodes the number of general and fp registers |
| // passed by the caller and the callng convention (currently just |
| // the number of general registers and assumes C argument passing) |
| |
| extern "C" { |
| int aarch64_stub_prolog_size(); |
| void aarch64_stub_prolog(); |
| void aarch64_prolog(); |
| } |
| |
| void MacroAssembler::c_stub_prolog(int gp_arg_count, int fp_arg_count, int ret_type, |
| address *prolog_ptr) |
| { |
| int calltype = (((ret_type & 0x3) << 8) | |
| ((fp_arg_count & 0xf) << 4) | |
| (gp_arg_count & 0xf)); |
| |
| // the addresses for the x86 to ARM entry code we need to use |
| address start = pc(); |
| // printf("start = %lx\n", start); |
| int byteCount = aarch64_stub_prolog_size(); |
| // printf("byteCount = %x\n", byteCount); |
| int instructionCount = (byteCount + 3)/ 4; |
| // printf("instructionCount = %x\n", instructionCount); |
| for (int i = 0; i < instructionCount; i++) { |
| nop(); |
| } |
| |
| memcpy(start, (void*)aarch64_stub_prolog, byteCount); |
| |
| // write the address of the setup routine and the call format at the |
| // end of into the copied code |
| u_int64_t *patch_end = (u_int64_t *)(start + byteCount); |
| if (prolog_ptr) |
| patch_end[-2] = (u_int64_t)prolog_ptr; |
| patch_end[-1] = calltype; |
| } |
| #endif |
| |
| void MacroAssembler::push_call_clobbered_registers() { |
| push(RegSet::range(r0, r18) - RegSet::of(rscratch1, rscratch2), sp); |
| |
| // Push v0-v7, v16-v31. |
| for (int i = 30; i >= 0; i -= 2) { |
| if (i <= v7->encoding() || i >= v16->encoding()) { |
| stpd(as_FloatRegister(i), as_FloatRegister(i+1), |
| Address(pre(sp, -2 * wordSize))); |
| } |
| } |
| } |
| |
| void MacroAssembler::pop_call_clobbered_registers() { |
| |
| for (int i = 0; i < 32; i += 2) { |
| if (i <= v7->encoding() || i >= v16->encoding()) { |
| ldpd(as_FloatRegister(i), as_FloatRegister(i+1), |
| Address(post(sp, 2 * wordSize))); |
| } |
| } |
| |
| pop(RegSet::range(r0, r18) - RegSet::of(rscratch1, rscratch2), sp); |
| } |
| |
| void MacroAssembler::push_CPU_state(bool save_vectors) { |
| push(0x3fffffff, sp); // integer registers except lr & sp |
| |
| if (!save_vectors) { |
| for (int i = 30; i >= 0; i -= 2) |
| stpd(as_FloatRegister(i), as_FloatRegister(i+1), |
| Address(pre(sp, -2 * wordSize))); |
| } else { |
| for (int i = 30; i >= 0; i -= 2) |
| stpq(as_FloatRegister(i), as_FloatRegister(i+1), |
| Address(pre(sp, -4 * wordSize))); |
| } |
| } |
| |
| void MacroAssembler::pop_CPU_state(bool restore_vectors) { |
| if (!restore_vectors) { |
| for (int i = 0; i < 32; i += 2) |
| ldpd(as_FloatRegister(i), as_FloatRegister(i+1), |
| Address(post(sp, 2 * wordSize))); |
| } else { |
| for (int i = 0; i < 32; i += 2) |
| ldpq(as_FloatRegister(i), as_FloatRegister(i+1), |
| Address(post(sp, 4 * wordSize))); |
| } |
| |
| pop(0x3fffffff, sp); // integer registers except lr & sp |
| } |
| |
| /** |
| * Helpers for multiply_to_len(). |
| */ |
| void MacroAssembler::add2_with_carry(Register final_dest_hi, Register dest_hi, Register dest_lo, |
| Register src1, Register src2) { |
| adds(dest_lo, dest_lo, src1); |
| adc(dest_hi, dest_hi, zr); |
| adds(dest_lo, dest_lo, src2); |
| adc(final_dest_hi, dest_hi, zr); |
| } |
| |
| // Generate an address from (r + r1 extend offset). "size" is the |
| // size of the operand. The result may be in rscratch2. |
| Address MacroAssembler::offsetted_address(Register r, Register r1, |
| Address::extend ext, int offset, int size) { |
| if (offset || (ext.shift() % size != 0)) { |
| lea(rscratch2, Address(r, r1, ext)); |
| return Address(rscratch2, offset); |
| } else { |
| return Address(r, r1, ext); |
| } |
| } |
| |
| Address MacroAssembler::spill_address(int size, int offset, Register tmp) |
| { |
| assert(offset >= 0, "spill to negative address?"); |
| // Offset reachable ? |
| // Not aligned - 9 bits signed offset |
| // Aligned - 12 bits unsigned offset shifted |
| Register base = sp; |
| if ((offset & (size-1)) && offset >= (1<<8)) { |
| add(tmp, base, offset & ((1<<12)-1)); |
| base = tmp; |
| offset &= -1<<12; |
| } |
| |
| if (offset >= (1<<12) * size) { |
| add(tmp, base, offset & (((1<<12)-1)<<12)); |
| base = tmp; |
| offset &= ~(((1<<12)-1)<<12); |
| } |
| |
| return Address(base, offset); |
| } |
| |
| /** |
| * Multiply 64 bit by 64 bit first loop. |
| */ |
| void MacroAssembler::multiply_64_x_64_loop(Register x, Register xstart, Register x_xstart, |
| Register y, Register y_idx, Register z, |
| Register carry, Register product, |
| Register idx, Register kdx) { |
| // |
| // jlong carry, x[], y[], z[]; |
| // for (int idx=ystart, kdx=ystart+1+xstart; idx >= 0; idx-, kdx--) { |
| // huge_128 product = y[idx] * x[xstart] + carry; |
| // z[kdx] = (jlong)product; |
| // carry = (jlong)(product >>> 64); |
| // } |
| // z[xstart] = carry; |
| // |
| |
| Label L_first_loop, L_first_loop_exit; |
| Label L_one_x, L_one_y, L_multiply; |
| |
| subsw(xstart, xstart, 1); |
| br(Assembler::MI, L_one_x); |
| |
| lea(rscratch1, Address(x, xstart, Address::lsl(LogBytesPerInt))); |
| ldr(x_xstart, Address(rscratch1)); |
| ror(x_xstart, x_xstart, 32); // convert big-endian to little-endian |
| |
| bind(L_first_loop); |
| subsw(idx, idx, 1); |
| br(Assembler::MI, L_first_loop_exit); |
| subsw(idx, idx, 1); |
| br(Assembler::MI, L_one_y); |
| lea(rscratch1, Address(y, idx, Address::uxtw(LogBytesPerInt))); |
| ldr(y_idx, Address(rscratch1)); |
| ror(y_idx, y_idx, 32); // convert big-endian to little-endian |
| bind(L_multiply); |
| |
| // AArch64 has a multiply-accumulate instruction that we can't use |
| // here because it has no way to process carries, so we have to use |
| // separate add and adc instructions. Bah. |
| umulh(rscratch1, x_xstart, y_idx); // x_xstart * y_idx -> rscratch1:product |
| mul(product, x_xstart, y_idx); |
| adds(product, product, carry); |
| adc(carry, rscratch1, zr); // x_xstart * y_idx + carry -> carry:product |
| |
| subw(kdx, kdx, 2); |
| ror(product, product, 32); // back to big-endian |
| str(product, offsetted_address(z, kdx, Address::uxtw(LogBytesPerInt), 0, BytesPerLong)); |
| |
| b(L_first_loop); |
| |
| bind(L_one_y); |
| ldrw(y_idx, Address(y, 0)); |
| b(L_multiply); |
| |
| bind(L_one_x); |
| ldrw(x_xstart, Address(x, 0)); |
| b(L_first_loop); |
| |
| bind(L_first_loop_exit); |
| } |
| |
| /** |
| * Multiply 128 bit by 128. Unrolled inner loop. |
| * |
| */ |
| void MacroAssembler::multiply_128_x_128_loop(Register y, Register z, |
| Register carry, Register carry2, |
| Register idx, Register jdx, |
| Register yz_idx1, Register yz_idx2, |
| Register tmp, Register tmp3, Register tmp4, |
| Register tmp6, Register product_hi) { |
| |
| // jlong carry, x[], y[], z[]; |
| // int kdx = ystart+1; |
| // for (int idx=ystart-2; idx >= 0; idx -= 2) { // Third loop |
| // huge_128 tmp3 = (y[idx+1] * product_hi) + z[kdx+idx+1] + carry; |
| // jlong carry2 = (jlong)(tmp3 >>> 64); |
| // huge_128 tmp4 = (y[idx] * product_hi) + z[kdx+idx] + carry2; |
| // carry = (jlong)(tmp4 >>> 64); |
| // z[kdx+idx+1] = (jlong)tmp3; |
| // z[kdx+idx] = (jlong)tmp4; |
| // } |
| // idx += 2; |
| // if (idx > 0) { |
| // yz_idx1 = (y[idx] * product_hi) + z[kdx+idx] + carry; |
| // z[kdx+idx] = (jlong)yz_idx1; |
| // carry = (jlong)(yz_idx1 >>> 64); |
| // } |
| // |
| |
| Label L_third_loop, L_third_loop_exit, L_post_third_loop_done; |
| |
| lsrw(jdx, idx, 2); |
| |
| bind(L_third_loop); |
| |
| subsw(jdx, jdx, 1); |
| br(Assembler::MI, L_third_loop_exit); |
| subw(idx, idx, 4); |
| |
| lea(rscratch1, Address(y, idx, Address::uxtw(LogBytesPerInt))); |
| |
| ldp(yz_idx2, yz_idx1, Address(rscratch1, 0)); |
| |
| lea(tmp6, Address(z, idx, Address::uxtw(LogBytesPerInt))); |
| |
| ror(yz_idx1, yz_idx1, 32); // convert big-endian to little-endian |
| ror(yz_idx2, yz_idx2, 32); |
| |
| ldp(rscratch2, rscratch1, Address(tmp6, 0)); |
| |
| mul(tmp3, product_hi, yz_idx1); // yz_idx1 * product_hi -> tmp4:tmp3 |
| umulh(tmp4, product_hi, yz_idx1); |
| |
| ror(rscratch1, rscratch1, 32); // convert big-endian to little-endian |
| ror(rscratch2, rscratch2, 32); |
| |
| mul(tmp, product_hi, yz_idx2); // yz_idx2 * product_hi -> carry2:tmp |
| umulh(carry2, product_hi, yz_idx2); |
| |
| // propagate sum of both multiplications into carry:tmp4:tmp3 |
| adds(tmp3, tmp3, carry); |
| adc(tmp4, tmp4, zr); |
| adds(tmp3, tmp3, rscratch1); |
| adcs(tmp4, tmp4, tmp); |
| adc(carry, carry2, zr); |
| adds(tmp4, tmp4, rscratch2); |
| adc(carry, carry, zr); |
| |
| ror(tmp3, tmp3, 32); // convert little-endian to big-endian |
| ror(tmp4, tmp4, 32); |
| stp(tmp4, tmp3, Address(tmp6, 0)); |
| |
| b(L_third_loop); |
| bind (L_third_loop_exit); |
| |
| andw (idx, idx, 0x3); |
| cbz(idx, L_post_third_loop_done); |
| |
| Label L_check_1; |
| subsw(idx, idx, 2); |
| br(Assembler::MI, L_check_1); |
| |
| lea(rscratch1, Address(y, idx, Address::uxtw(LogBytesPerInt))); |
| ldr(yz_idx1, Address(rscratch1, 0)); |
| ror(yz_idx1, yz_idx1, 32); |
| mul(tmp3, product_hi, yz_idx1); // yz_idx1 * product_hi -> tmp4:tmp3 |
| umulh(tmp4, product_hi, yz_idx1); |
| lea(rscratch1, Address(z, idx, Address::uxtw(LogBytesPerInt))); |
| ldr(yz_idx2, Address(rscratch1, 0)); |
| ror(yz_idx2, yz_idx2, 32); |
| |
| add2_with_carry(carry, tmp4, tmp3, carry, yz_idx2); |
| |
| ror(tmp3, tmp3, 32); |
| str(tmp3, Address(rscratch1, 0)); |
| |
| bind (L_check_1); |
| |
| andw (idx, idx, 0x1); |
| subsw(idx, idx, 1); |
| br(Assembler::MI, L_post_third_loop_done); |
| ldrw(tmp4, Address(y, idx, Address::uxtw(LogBytesPerInt))); |
| mul(tmp3, tmp4, product_hi); // tmp4 * product_hi -> carry2:tmp3 |
| umulh(carry2, tmp4, product_hi); |
| ldrw(tmp4, Address(z, idx, Address::uxtw(LogBytesPerInt))); |
| |
| add2_with_carry(carry2, tmp3, tmp4, carry); |
| |
| strw(tmp3, Address(z, idx, Address::uxtw(LogBytesPerInt))); |
| extr(carry, carry2, tmp3, 32); |
| |
| bind(L_post_third_loop_done); |
| } |
| |
| /** |
| * Code for BigInteger::multiplyToLen() instrinsic. |
| * |
| * r0: x |
| * r1: xlen |
| * r2: y |
| * r3: ylen |
| * r4: z |
| * r5: zlen |
| * r10: tmp1 |
| * r11: tmp2 |
| * r12: tmp3 |
| * r13: tmp4 |
| * r14: tmp5 |
| * r15: tmp6 |
| * r16: tmp7 |
| * |
| */ |
| void MacroAssembler::multiply_to_len(Register x, Register xlen, Register y, Register ylen, |
| Register z, Register zlen, |
| Register tmp1, Register tmp2, Register tmp3, Register tmp4, |
| Register tmp5, Register tmp6, Register product_hi) { |
| |
| assert_different_registers(x, xlen, y, ylen, z, zlen, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6); |
| |
| const Register idx = tmp1; |
| const Register kdx = tmp2; |
| const Register xstart = tmp3; |
| |
| const Register y_idx = tmp4; |
| const Register carry = tmp5; |
| const Register product = xlen; |
| const Register x_xstart = zlen; // reuse register |
| |
| // First Loop. |
| // |
| // final static long LONG_MASK = 0xffffffffL; |
| // int xstart = xlen - 1; |
| // int ystart = ylen - 1; |
| // long carry = 0; |
| // for (int idx=ystart, kdx=ystart+1+xstart; idx >= 0; idx-, kdx--) { |
| // long product = (y[idx] & LONG_MASK) * (x[xstart] & LONG_MASK) + carry; |
| // z[kdx] = (int)product; |
| // carry = product >>> 32; |
| // } |
| // z[xstart] = (int)carry; |
| // |
| |
| movw(idx, ylen); // idx = ylen; |
| movw(kdx, zlen); // kdx = xlen+ylen; |
| mov(carry, zr); // carry = 0; |
| |
| Label L_done; |
| |
| movw(xstart, xlen); |
| subsw(xstart, xstart, 1); |
| br(Assembler::MI, L_done); |
| |
| multiply_64_x_64_loop(x, xstart, x_xstart, y, y_idx, z, carry, product, idx, kdx); |
| |
| Label L_second_loop; |
| cbzw(kdx, L_second_loop); |
| |
| Label L_carry; |
| subw(kdx, kdx, 1); |
| cbzw(kdx, L_carry); |
| |
| strw(carry, Address(z, kdx, Address::uxtw(LogBytesPerInt))); |
| lsr(carry, carry, 32); |
| subw(kdx, kdx, 1); |
| |
| bind(L_carry); |
| strw(carry, Address(z, kdx, Address::uxtw(LogBytesPerInt))); |
| |
| // Second and third (nested) loops. |
| // |
| // for (int i = xstart-1; i >= 0; i--) { // Second loop |
| // carry = 0; |
| // for (int jdx=ystart, k=ystart+1+i; jdx >= 0; jdx--, k--) { // Third loop |
| // long product = (y[jdx] & LONG_MASK) * (x[i] & LONG_MASK) + |
| // (z[k] & LONG_MASK) + carry; |
| // z[k] = (int)product; |
| // carry = product >>> 32; |
| // } |
| // z[i] = (int)carry; |
| // } |
| // |
| // i = xlen, j = tmp1, k = tmp2, carry = tmp5, x[i] = product_hi |
| |
| const Register jdx = tmp1; |
| |
| bind(L_second_loop); |
| mov(carry, zr); // carry = 0; |
| movw(jdx, ylen); // j = ystart+1 |
| |
| subsw(xstart, xstart, 1); // i = xstart-1; |
| br(Assembler::MI, L_done); |
| |
| str(z, Address(pre(sp, -4 * wordSize))); |
| |
| Label L_last_x; |
| lea(z, offsetted_address(z, xstart, Address::uxtw(LogBytesPerInt), 4, BytesPerInt)); // z = z + k - j |
| subsw(xstart, xstart, 1); // i = xstart-1; |
| br(Assembler::MI, L_last_x); |
| |
| lea(rscratch1, Address(x, xstart, Address::uxtw(LogBytesPerInt))); |
| ldr(product_hi, Address(rscratch1)); |
| ror(product_hi, product_hi, 32); // convert big-endian to little-endian |
| |
| Label L_third_loop_prologue; |
| bind(L_third_loop_prologue); |
| |
| str(ylen, Address(sp, wordSize)); |
| stp(x, xstart, Address(sp, 2 * wordSize)); |
| multiply_128_x_128_loop(y, z, carry, x, jdx, ylen, product, |
| tmp2, x_xstart, tmp3, tmp4, tmp6, product_hi); |
| ldp(z, ylen, Address(post(sp, 2 * wordSize))); |
| ldp(x, xlen, Address(post(sp, 2 * wordSize))); // copy old xstart -> xlen |
| |
| addw(tmp3, xlen, 1); |
| strw(carry, Address(z, tmp3, Address::uxtw(LogBytesPerInt))); |
| subsw(tmp3, tmp3, 1); |
| br(Assembler::MI, L_done); |
| |
| lsr(carry, carry, 32); |
| strw(carry, Address(z, tmp3, Address::uxtw(LogBytesPerInt))); |
| b(L_second_loop); |
| |
| // Next infrequent code is moved outside loops. |
| bind(L_last_x); |
| ldrw(product_hi, Address(x, 0)); |
| b(L_third_loop_prologue); |
| |
| bind(L_done); |
| } |
| |
| /** |
| * Emits code to update CRC-32 with a byte value according to constants in table |
| * |
| * @param [in,out]crc Register containing the crc. |
| * @param [in]val Register containing the byte to fold into the CRC. |
| * @param [in]table Register containing the table of crc constants. |
| * |
| * uint32_t crc; |
| * val = crc_table[(val ^ crc) & 0xFF]; |
| * crc = val ^ (crc >> 8); |
| * |
| */ |
| void MacroAssembler::update_byte_crc32(Register crc, Register val, Register table) { |
| eor(val, val, crc); |
| andr(val, val, 0xff); |
| ldrw(val, Address(table, val, Address::lsl(2))); |
| eor(crc, val, crc, Assembler::LSR, 8); |
| } |
| |
| /** |
| * Emits code to update CRC-32 with a 32-bit value according to tables 0 to 3 |
| * |
| * @param [in,out]crc Register containing the crc. |
| * @param [in]v Register containing the 32-bit to fold into the CRC. |
| * @param [in]table0 Register containing table 0 of crc constants. |
| * @param [in]table1 Register containing table 1 of crc constants. |
| * @param [in]table2 Register containing table 2 of crc constants. |
| * @param [in]table3 Register containing table 3 of crc constants. |
| * |
| * uint32_t crc; |
| * v = crc ^ v |
| * crc = table3[v&0xff]^table2[(v>>8)&0xff]^table1[(v>>16)&0xff]^table0[v>>24] |
| * |
| */ |
| void MacroAssembler::update_word_crc32(Register crc, Register v, Register tmp, |
| Register table0, Register table1, Register table2, Register table3, |
| bool upper) { |
| eor(v, crc, v, upper ? LSR:LSL, upper ? 32:0); |
| uxtb(tmp, v); |
| ldrw(crc, Address(table3, tmp, Address::lsl(2))); |
| ubfx(tmp, v, 8, 8); |
| ldrw(tmp, Address(table2, tmp, Address::lsl(2))); |
| eor(crc, crc, tmp); |
| ubfx(tmp, v, 16, 8); |
| ldrw(tmp, Address(table1, tmp, Address::lsl(2))); |
| eor(crc, crc, tmp); |
| ubfx(tmp, v, 24, 8); |
| ldrw(tmp, Address(table0, tmp, Address::lsl(2))); |
| eor(crc, crc, tmp); |
| } |
| |
| /** |
| * @param crc register containing existing CRC (32-bit) |
| * @param buf register pointing to input byte buffer (byte*) |
| * @param len register containing number of bytes |
| * @param table register that will contain address of CRC table |
| * @param tmp scratch register |
| */ |
| void MacroAssembler::kernel_crc32(Register crc, Register buf, Register len, |
| Register table0, Register table1, Register table2, Register table3, |
| Register tmp, Register tmp2, Register tmp3) { |
| Label L_by16, L_by16_loop, L_by4, L_by4_loop, L_by1, L_by1_loop, L_exit; |
| unsigned long offset; |
| |
| ornw(crc, zr, crc); |
| |
| if (UseCRC32) { |
| Label CRC_by64_loop, CRC_by4_loop, CRC_by1_loop; |
| |
| subs(len, len, 64); |
| br(Assembler::GE, CRC_by64_loop); |
| adds(len, len, 64-4); |
| br(Assembler::GE, CRC_by4_loop); |
| adds(len, len, 4); |
| br(Assembler::GT, CRC_by1_loop); |
| b(L_exit); |
| |
| BIND(CRC_by4_loop); |
| ldrw(tmp, Address(post(buf, 4))); |
| subs(len, len, 4); |
| crc32w(crc, crc, tmp); |
| br(Assembler::GE, CRC_by4_loop); |
| adds(len, len, 4); |
| br(Assembler::LE, L_exit); |
| BIND(CRC_by1_loop); |
| ldrb(tmp, Address(post(buf, 1))); |
| subs(len, len, 1); |
| crc32b(crc, crc, tmp); |
| br(Assembler::GT, CRC_by1_loop); |
| b(L_exit); |
| |
| align(CodeEntryAlignment); |
| BIND(CRC_by64_loop); |
| subs(len, len, 64); |
| ldp(tmp, tmp3, Address(post(buf, 16))); |
| crc32x(crc, crc, tmp); |
| crc32x(crc, crc, tmp3); |
| ldp(tmp, tmp3, Address(post(buf, 16))); |
| crc32x(crc, crc, tmp); |
| crc32x(crc, crc, tmp3); |
| ldp(tmp, tmp3, Address(post(buf, 16))); |
| crc32x(crc, crc, tmp); |
| crc32x(crc, crc, tmp3); |
| ldp(tmp, tmp3, Address(post(buf, 16))); |
| crc32x(crc, crc, tmp); |
| crc32x(crc, crc, tmp3); |
| br(Assembler::GE, CRC_by64_loop); |
| adds(len, len, 64-4); |
| br(Assembler::GE, CRC_by4_loop); |
| adds(len, len, 4); |
| br(Assembler::GT, CRC_by1_loop); |
| BIND(L_exit); |
| ornw(crc, zr, crc); |
| return; |
| } |
| |
| adrp(table0, ExternalAddress(StubRoutines::crc_table_addr()), offset); |
| if (offset) add(table0, table0, offset); |
| add(table1, table0, 1*256*sizeof(juint)); |
| add(table2, table0, 2*256*sizeof(juint)); |
| add(table3, table0, 3*256*sizeof(juint)); |
| |
| if (UseNeon) { |
| cmp(len, 64); |
| br(Assembler::LT, L_by16); |
| eor(v16, T16B, v16, v16); |
| |
| Label L_fold; |
| |
| add(tmp, table0, 4*256*sizeof(juint)); // Point at the Neon constants |
| |
| ld1(v0, v1, T2D, post(buf, 32)); |
| ld1r(v4, T2D, post(tmp, 8)); |
| ld1r(v5, T2D, post(tmp, 8)); |
| ld1r(v6, T2D, post(tmp, 8)); |
| ld1r(v7, T2D, post(tmp, 8)); |
| mov(v16, T4S, 0, crc); |
| |
| eor(v0, T16B, v0, v16); |
| sub(len, len, 64); |
| |
| BIND(L_fold); |
| pmull(v22, T8H, v0, v5, T8B); |
| pmull(v20, T8H, v0, v7, T8B); |
| pmull(v23, T8H, v0, v4, T8B); |
| pmull(v21, T8H, v0, v6, T8B); |
| |
| pmull2(v18, T8H, v0, v5, T16B); |
| pmull2(v16, T8H, v0, v7, T16B); |
| pmull2(v19, T8H, v0, v4, T16B); |
| pmull2(v17, T8H, v0, v6, T16B); |
| |
| uzp1(v24, v20, v22, T8H); |
| uzp2(v25, v20, v22, T8H); |
| eor(v20, T16B, v24, v25); |
| |
| uzp1(v26, v16, v18, T8H); |
| uzp2(v27, v16, v18, T8H); |
| eor(v16, T16B, v26, v27); |
| |
| ushll2(v22, T4S, v20, T8H, 8); |
| ushll(v20, T4S, v20, T4H, 8); |
| |
| ushll2(v18, T4S, v16, T8H, 8); |
| ushll(v16, T4S, v16, T4H, 8); |
| |
| eor(v22, T16B, v23, v22); |
| eor(v18, T16B, v19, v18); |
| eor(v20, T16B, v21, v20); |
| eor(v16, T16B, v17, v16); |
| |
| uzp1(v17, v16, v20, T2D); |
| uzp2(v21, v16, v20, T2D); |
| eor(v17, T16B, v17, v21); |
| |
| ushll2(v20, T2D, v17, T4S, 16); |
| ushll(v16, T2D, v17, T2S, 16); |
| |
| eor(v20, T16B, v20, v22); |
| eor(v16, T16B, v16, v18); |
| |
| uzp1(v17, v20, v16, T2D); |
| uzp2(v21, v20, v16, T2D); |
| eor(v28, T16B, v17, v21); |
| |
| pmull(v22, T8H, v1, v5, T8B); |
| pmull(v20, T8H, v1, v7, T8B); |
| pmull(v23, T8H, v1, v4, T8B); |
| pmull(v21, T8H, v1, v6, T8B); |
| |
| pmull2(v18, T8H, v1, v5, T16B); |
| pmull2(v16, T8H, v1, v7, T16B); |
| pmull2(v19, T8H, v1, v4, T16B); |
| pmull2(v17, T8H, v1, v6, T16B); |
| |
| ld1(v0, v1, T2D, post(buf, 32)); |
| |
| uzp1(v24, v20, v22, T8H); |
| uzp2(v25, v20, v22, T8H); |
| eor(v20, T16B, v24, v25); |
| |
| uzp1(v26, v16, v18, T8H); |
| uzp2(v27, v16, v18, T8H); |
| eor(v16, T16B, v26, v27); |
| |
| ushll2(v22, T4S, v20, T8H, 8); |
| ushll(v20, T4S, v20, T4H, 8); |
| |
| ushll2(v18, T4S, v16, T8H, 8); |
| ushll(v16, T4S, v16, T4H, 8); |
| |
| eor(v22, T16B, v23, v22); |
| eor(v18, T16B, v19, v18); |
| eor(v20, T16B, v21, v20); |
| eor(v16, T16B, v17, v16); |
| |
| uzp1(v17, v16, v20, T2D); |
| uzp2(v21, v16, v20, T2D); |
| eor(v16, T16B, v17, v21); |
| |
| ushll2(v20, T2D, v16, T4S, 16); |
| ushll(v16, T2D, v16, T2S, 16); |
| |
| eor(v20, T16B, v22, v20); |
| eor(v16, T16B, v16, v18); |
| |
| uzp1(v17, v20, v16, T2D); |
| uzp2(v21, v20, v16, T2D); |
| eor(v20, T16B, v17, v21); |
| |
| shl(v16, T2D, v28, 1); |
| shl(v17, T2D, v20, 1); |
| |
| eor(v0, T16B, v0, v16); |
| eor(v1, T16B, v1, v17); |
| |
| subs(len, len, 32); |
| br(Assembler::GE, L_fold); |
| |
| mov(crc, 0); |
| mov(tmp, v0, T1D, 0); |
| update_word_crc32(crc, tmp, tmp2, table0, table1, table2, table3, false); |
| update_word_crc32(crc, tmp, tmp2, table0, table1, table2, table3, true); |
| mov(tmp, v0, T1D, 1); |
| update_word_crc32(crc, tmp, tmp2, table0, table1, table2, table3, false); |
| update_word_crc32(crc, tmp, tmp2, table0, table1, table2, table3, true); |
| mov(tmp, v1, T1D, 0); |
| update_word_crc32(crc, tmp, tmp2, table0, table1, table2, table3, false); |
| update_word_crc32(crc, tmp, tmp2, table0, table1, table2, table3, true); |
| mov(tmp, v1, T1D, 1); |
| update_word_crc32(crc, tmp, tmp2, table0, table1, table2, table3, false); |
| update_word_crc32(crc, tmp, tmp2, table0, table1, table2, table3, true); |
| |
| add(len, len, 32); |
| } |
| |
| BIND(L_by16); |
| subs(len, len, 16); |
| br(Assembler::GE, L_by16_loop); |
| adds(len, len, 16-4); |
| br(Assembler::GE, L_by4_loop); |
| adds(len, len, 4); |
| br(Assembler::GT, L_by1_loop); |
| b(L_exit); |
| |
| BIND(L_by4_loop); |
| ldrw(tmp, Address(post(buf, 4))); |
| update_word_crc32(crc, tmp, tmp2, table0, table1, table2, table3); |
| subs(len, len, 4); |
| br(Assembler::GE, L_by4_loop); |
| adds(len, len, 4); |
| br(Assembler::LE, L_exit); |
| BIND(L_by1_loop); |
| subs(len, len, 1); |
| ldrb(tmp, Address(post(buf, 1))); |
| update_byte_crc32(crc, tmp, table0); |
| br(Assembler::GT, L_by1_loop); |
| b(L_exit); |
| |
| align(CodeEntryAlignment); |
| BIND(L_by16_loop); |
| subs(len, len, 16); |
| ldp(tmp, tmp3, Address(post(buf, 16))); |
| update_word_crc32(crc, tmp, tmp2, table0, table1, table2, table3, false); |
| update_word_crc32(crc, tmp, tmp2, table0, table1, table2, table3, true); |
| update_word_crc32(crc, tmp3, tmp2, table0, table1, table2, table3, false); |
| update_word_crc32(crc, tmp3, tmp2, table0, table1, table2, table3, true); |
| br(Assembler::GE, L_by16_loop); |
| adds(len, len, 16-4); |
| br(Assembler::GE, L_by4_loop); |
| adds(len, len, 4); |
| br(Assembler::GT, L_by1_loop); |
| BIND(L_exit); |
| ornw(crc, zr, crc); |
| } |
| |
| /** |
| * @param crc register containing existing CRC (32-bit) |
| * @param buf register pointing to input byte buffer (byte*) |
| * @param len register containing number of bytes |
| * @param table register that will contain address of CRC table |
| * @param tmp scratch register |
| */ |
| void MacroAssembler::kernel_crc32c(Register crc, Register buf, Register len, |
| Register table0, Register table1, Register table2, Register table3, |
| Register tmp, Register tmp2, Register tmp3) { |
| Label L_exit; |
| Label CRC_by64_loop, CRC_by4_loop, CRC_by1_loop; |
| |
| subs(len, len, 64); |
| br(Assembler::GE, CRC_by64_loop); |
| adds(len, len, 64-4); |
| br(Assembler::GE, CRC_by4_loop); |
| adds(len, len, 4); |
| br(Assembler::GT, CRC_by1_loop); |
| b(L_exit); |
| |
| BIND(CRC_by4_loop); |
| ldrw(tmp, Address(post(buf, 4))); |
| subs(len, len, 4); |
| crc32cw(crc, crc, tmp); |
| br(Assembler::GE, CRC_by4_loop); |
| adds(len, len, 4); |
| br(Assembler::LE, L_exit); |
| BIND(CRC_by1_loop); |
| ldrb(tmp, Address(post(buf, 1))); |
| subs(len, len, 1); |
| crc32cb(crc, crc, tmp); |
| br(Assembler::GT, CRC_by1_loop); |
| b(L_exit); |
| |
| align(CodeEntryAlignment); |
| BIND(CRC_by64_loop); |
| subs(len, len, 64); |
| ldp(tmp, tmp3, Address(post(buf, 16))); |
| crc32cx(crc, crc, tmp); |
| crc32cx(crc, crc, tmp3); |
| ldp(tmp, tmp3, Address(post(buf, 16))); |
| crc32cx(crc, crc, tmp); |
| crc32cx(crc, crc, tmp3); |
| ldp(tmp, tmp3, Address(post(buf, 16))); |
| crc32cx(crc, crc, tmp); |
| crc32cx(crc, crc, tmp3); |
| ldp(tmp, tmp3, Address(post(buf, 16))); |
| crc32cx(crc, crc, tmp); |
| crc32cx(crc, crc, tmp3); |
| br(Assembler::GE, CRC_by64_loop); |
| adds(len, len, 64-4); |
| br(Assembler::GE, CRC_by4_loop); |
| adds(len, len, 4); |
| br(Assembler::GT, CRC_by1_loop); |
| BIND(L_exit); |
| return; |
| } |
| |
| SkipIfEqual::SkipIfEqual( |
| MacroAssembler* masm, const bool* flag_addr, bool value) { |
| _masm = masm; |
| unsigned long offset; |
| _masm->adrp(rscratch1, ExternalAddress((address)flag_addr), offset); |
| _masm->ldrb(rscratch1, Address(rscratch1, offset)); |
| _masm->cbzw(rscratch1, _label); |
| } |
| |
| SkipIfEqual::~SkipIfEqual() { |
| _masm->bind(_label); |
| } |
| |
| void MacroAssembler::addptr(const Address &dst, int32_t src) { |
| Address adr; |
| switch(dst.getMode()) { |
| case Address::base_plus_offset: |
| // This is the expected mode, although we allow all the other |
| // forms below. |
| adr = form_address(rscratch2, dst.base(), dst.offset(), LogBytesPerWord); |
| break; |
| default: |
| lea(rscratch2, dst); |
| adr = Address(rscratch2); |
| break; |
| } |
| ldr(rscratch1, adr); |
| add(rscratch1, rscratch1, src); |
| str(rscratch1, adr); |
| } |
| |
| void MacroAssembler::cmpptr(Register src1, Address src2) { |
| unsigned long offset; |
| adrp(rscratch1, src2, offset); |
| ldr(rscratch1, Address(rscratch1, offset)); |
| cmp(src1, rscratch1); |
| } |
| |
| void MacroAssembler::store_check(Register obj, Address dst) { |
| store_check(obj); |
| } |
| |
| void MacroAssembler::store_check(Register obj) { |
| // Does a store check for the oop in register obj. The content of |
| // register obj is destroyed afterwards. |
| |
| BarrierSet* bs = Universe::heap()->barrier_set(); |
| assert(bs->kind() == BarrierSet::CardTableForRS || |
| bs->kind() == BarrierSet::CardTableExtension, |
| "Wrong barrier set kind"); |
| |
| CardTableModRefBS* ct = barrier_set_cast<CardTableModRefBS>(bs); |
| assert(sizeof(*ct->byte_map_base) == sizeof(jbyte), "adjust this code"); |
| |
| lsr(obj, obj, CardTableModRefBS::card_shift); |
| |
| assert(CardTableModRefBS::dirty_card_val() == 0, "must be"); |
| |
| load_byte_map_base(rscratch1); |
| |
| if (UseCondCardMark) { |
| Label L_already_dirty; |
| membar(StoreLoad); |
| ldrb(rscratch2, Address(obj, rscratch1)); |
| cbz(rscratch2, L_already_dirty); |
| strb(zr, Address(obj, rscratch1)); |
| bind(L_already_dirty); |
| } else { |
| if (UseConcMarkSweepGC && CMSPrecleaningEnabled) { |
| membar(StoreStore); |
| } |
| strb(zr, Address(obj, rscratch1)); |
| } |
| } |
| |
| void MacroAssembler::load_klass(Register dst, Register src) { |
| if (UseCompressedClassPointers) { |
| ldrw(dst, Address(src, oopDesc::klass_offset_in_bytes())); |
| decode_klass_not_null(dst); |
| } else { |
| ldr(dst, Address(src, oopDesc::klass_offset_in_bytes())); |
| } |
| } |
| |
| void MacroAssembler::cmp_klass(Register oop, Register trial_klass, Register tmp) { |
| if (UseCompressedClassPointers) { |
| ldrw(tmp, Address(oop, oopDesc::klass_offset_in_bytes())); |
| if (Universe::narrow_klass_base() == NULL) { |
| cmp(trial_klass, tmp, LSL, Universe::narrow_klass_shift()); |
| return; |
| } else if (((uint64_t)Universe::narrow_klass_base() & 0xffffffff) == 0 |
| && Universe::narrow_klass_shift() == 0) { |
| // Only the bottom 32 bits matter |
| cmpw(trial_klass, tmp); |
| return; |
| } |
| decode_klass_not_null(tmp); |
| } else { |
| ldr(tmp, Address(oop, oopDesc::klass_offset_in_bytes())); |
| } |
| cmp(trial_klass, tmp); |
| } |
| |
| void MacroAssembler::load_prototype_header(Register dst, Register src) { |
| load_klass(dst, src); |
| ldr(dst, Address(dst, Klass::prototype_header_offset())); |
| } |
| |
| void MacroAssembler::store_klass(Register dst, Register src) { |
| // FIXME: Should this be a store release? concurrent gcs assumes |
| // klass length is valid if klass field is not null. |
| if (UseCompressedClassPointers) { |
| encode_klass_not_null(src); |
| strw(src, Address(dst, oopDesc::klass_offset_in_bytes())); |
| } else { |
| str(src, Address(dst, oopDesc::klass_offset_in_bytes())); |
| } |
| } |
| |
| void MacroAssembler::store_klass_gap(Register dst, Register src) { |
| if (UseCompressedClassPointers) { |
| // Store to klass gap in destination |
| strw(src, Address(dst, oopDesc::klass_gap_offset_in_bytes())); |
| } |
| } |
| |
| // Algorithm must match oop.inline.hpp encode_heap_oop. |
| void MacroAssembler::encode_heap_oop(Register d, Register s) { |
| #ifdef ASSERT |
| verify_heapbase("MacroAssembler::encode_heap_oop: heap base corrupted?"); |
| #endif |
| verify_oop(s, "broken oop in encode_heap_oop"); |
| if (Universe::narrow_oop_base() == NULL) { |
| if (Universe::narrow_oop_shift() != 0) { |
| assert (LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); |
| lsr(d, s, LogMinObjAlignmentInBytes); |
| } else { |
| mov(d, s); |
| } |
| } else { |
| subs(d, s, rheapbase); |
| csel(d, d, zr, Assembler::HS); |
| lsr(d, d, LogMinObjAlignmentInBytes); |
| |
| /* Old algorithm: is this any worse? |
| Label nonnull; |
| cbnz(r, nonnull); |
| sub(r, r, rheapbase); |
| bind(nonnull); |
| lsr(r, r, LogMinObjAlignmentInBytes); |
| */ |
| } |
| } |
| |
| void MacroAssembler::encode_heap_oop_not_null(Register r) { |
| #ifdef ASSERT |
| verify_heapbase("MacroAssembler::encode_heap_oop_not_null: heap base corrupted?"); |
| if (CheckCompressedOops) { |
| Label ok; |
| cbnz(r, ok); |
| stop("null oop passed to encode_heap_oop_not_null"); |
| bind(ok); |
| } |
| #endif |
| verify_oop(r, "broken oop in encode_heap_oop_not_null"); |
| if (Universe::narrow_oop_base() != NULL) { |
| sub(r, r, rheapbase); |
| } |
| if (Universe::narrow_oop_shift() != 0) { |
| assert (LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); |
| lsr(r, r, LogMinObjAlignmentInBytes); |
| } |
| } |
| |
| void MacroAssembler::encode_heap_oop_not_null(Register dst, Register src) { |
| #ifdef ASSERT |
| verify_heapbase("MacroAssembler::encode_heap_oop_not_null2: heap base corrupted?"); |
| if (CheckCompressedOops) { |
| Label ok; |
| cbnz(src, ok); |
| stop("null oop passed to encode_heap_oop_not_null2"); |
| bind(ok); |
| } |
| #endif |
| verify_oop(src, "broken oop in encode_heap_oop_not_null2"); |
| |
| Register data = src; |
| if (Universe::narrow_oop_base() != NULL) { |
| sub(dst, src, rheapbase); |
| data = dst; |
| } |
| if (Universe::narrow_oop_shift() != 0) { |
| assert (LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); |
| lsr(dst, data, LogMinObjAlignmentInBytes); |
| data = dst; |
| } |
| if (data == src) |
| mov(dst, src); |
| } |
| |
| void MacroAssembler::decode_heap_oop(Register d, Register s) { |
| #ifdef ASSERT |
| verify_heapbase("MacroAssembler::decode_heap_oop: heap base corrupted?"); |
| #endif |
| if (Universe::narrow_oop_base() == NULL) { |
| if (Universe::narrow_oop_shift() != 0 || d != s) { |
| lsl(d, s, Universe::narrow_oop_shift()); |
| } |
| } else { |
| Label done; |
| if (d != s) |
| mov(d, s); |
| cbz(s, done); |
| add(d, rheapbase, s, Assembler::LSL, LogMinObjAlignmentInBytes); |
| bind(done); |
| } |
| verify_oop(d, "broken oop in decode_heap_oop"); |
| } |
| |
| void MacroAssembler::decode_heap_oop_not_null(Register r) { |
| assert (UseCompressedOops, "should only be used for compressed headers"); |
| assert (Universe::heap() != NULL, "java heap should be initialized"); |
| // Cannot assert, unverified entry point counts instructions (see .ad file) |
| // vtableStubs also counts instructions in pd_code_size_limit. |
| // Also do not verify_oop as this is called by verify_oop. |
| if (Universe::narrow_oop_shift() != 0) { |
| assert(LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); |
| if (Universe::narrow_oop_base() != NULL) { |
| add(r, rheapbase, r, Assembler::LSL, LogMinObjAlignmentInBytes); |
| } else { |
| add(r, zr, r, Assembler::LSL, LogMinObjAlignmentInBytes); |
| } |
| } else { |
| assert (Universe::narrow_oop_base() == NULL, "sanity"); |
| } |
| } |
| |
| void MacroAssembler::decode_heap_oop_not_null(Register dst, Register src) { |
| assert (UseCompressedOops, "should only be used for compressed headers"); |
| assert (Universe::heap() != NULL, "java heap should be initialized"); |
| // Cannot assert, unverified entry point counts instructions (see .ad file) |
| // vtableStubs also counts instructions in pd_code_size_limit. |
| // Also do not verify_oop as this is called by verify_oop. |
| if (Universe::narrow_oop_shift() != 0) { |
| assert(LogMinObjAlignmentInBytes == Universe::narrow_oop_shift(), "decode alg wrong"); |
| if (Universe::narrow_oop_base() != NULL) { |
| add(dst, rheapbase, src, Assembler::LSL, LogMinObjAlignmentInBytes); |
| } else { |
| add(dst, zr, src, Assembler::LSL, LogMinObjAlignmentInBytes); |
| } |
| } else { |
| assert (Universe::narrow_oop_base() == NULL, "sanity"); |
| if (dst != src) { |
| mov(dst, src); |
| } |
| } |
| } |
| |
| void MacroAssembler::encode_klass_not_null(Register dst, Register src) { |
| if (Universe::narrow_klass_base() == NULL) { |
| if (Universe::narrow_klass_shift() != 0) { |
| assert (LogKlassAlignmentInBytes == Universe::narrow_klass_shift(), "decode alg wrong"); |
| lsr(dst, src, LogKlassAlignmentInBytes); |
| } else { |
| if (dst != src) mov(dst, src); |
| } |
| return; |
| } |
| |
| if (use_XOR_for_compressed_class_base) { |
| if (Universe::narrow_klass_shift() != 0) { |
| eor(dst, src, (uint64_t)Universe::narrow_klass_base()); |
| lsr(dst, dst, LogKlassAlignmentInBytes); |
| } else { |
| eor(dst, src, (uint64_t)Universe::narrow_klass_base()); |
| } |
| return; |
| } |
| |
| if (((uint64_t)Universe::narrow_klass_base() & 0xffffffff) == 0 |
| && Universe::narrow_klass_shift() == 0) { |
| movw(dst, src); |
| return; |
| } |
| |
| #ifdef ASSERT |
| verify_heapbase("MacroAssembler::encode_klass_not_null2: heap base corrupted?"); |
| #endif |
| |
| Register rbase = dst; |
| if (dst == src) rbase = rheapbase; |
| mov(rbase, (uint64_t)Universe::narrow_klass_base()); |
| sub(dst, src, rbase); |
| if (Universe::narrow_klass_shift() != 0) { |
| assert (LogKlassAlignmentInBytes == Universe::narrow_klass_shift(), "decode alg wrong"); |
| lsr(dst, dst, LogKlassAlignmentInBytes); |
| } |
| if (dst == src) reinit_heapbase(); |
| } |
| |
| void MacroAssembler::encode_klass_not_null(Register r) { |
| encode_klass_not_null(r, r); |
| } |
| |
| void MacroAssembler::decode_klass_not_null(Register dst, Register src) { |
| Register rbase = dst; |
| assert (UseCompressedClassPointers, "should only be used for compressed headers"); |
| |
| if (Universe::narrow_klass_base() == NULL) { |
| if (Universe::narrow_klass_shift() != 0) { |
| assert(LogKlassAlignmentInBytes == Universe::narrow_klass_shift(), "decode alg wrong"); |
| lsl(dst, src, LogKlassAlignmentInBytes); |
| } else { |
| if (dst != src) mov(dst, src); |
| } |
| return; |
| } |
| |
| if (use_XOR_for_compressed_class_base) { |
| if (Universe::narrow_klass_shift() != 0) { |
| lsl(dst, src, LogKlassAlignmentInBytes); |
| eor(dst, dst, (uint64_t)Universe::narrow_klass_base()); |
| } else { |
| eor(dst, src, (uint64_t)Universe::narrow_klass_base()); |
| } |
| return; |
| } |
| |
| if (((uint64_t)Universe::narrow_klass_base() & 0xffffffff) == 0 |
| && Universe::narrow_klass_shift() == 0) { |
| if (dst != src) |
| movw(dst, src); |
| movk(dst, (uint64_t)Universe::narrow_klass_base() >> 32, 32); |
| return; |
| } |
| |
| // Cannot assert, unverified entry point counts instructions (see .ad file) |
| // vtableStubs also counts instructions in pd_code_size_limit. |
| // Also do not verify_oop as this is called by verify_oop. |
| if (dst == src) rbase = rheapbase; |
| mov(rbase, (uint64_t)Universe::narrow_klass_base()); |
| if (Universe::narrow_klass_shift() != 0) { |
| assert(LogKlassAlignmentInBytes == Universe::narrow_klass_shift(), "decode alg wrong"); |
| add(dst, rbase, src, Assembler::LSL, LogKlassAlignmentInBytes); |
| } else { |
| add(dst, rbase, src); |
| } |
| if (dst == src) reinit_heapbase(); |
| } |
| |
| void MacroAssembler::decode_klass_not_null(Register r) { |
| decode_klass_not_null(r, r); |
| } |
| |
| void MacroAssembler::set_narrow_oop(Register dst, jobject obj) { |
| assert (UseCompressedOops, "should only be used for compressed oops"); |
| assert (Universe::heap() != NULL, "java heap should be initialized"); |
| assert (oop_recorder() != NULL, "this assembler needs an OopRecorder"); |
| |
| int oop_index = oop_recorder()->find_index(obj); |
| assert(Universe::heap()->is_in_reserved(JNIHandles::resolve(obj)), "should be real oop"); |
| |
| InstructionMark im(this); |
| RelocationHolder rspec = oop_Relocation::spec(oop_index); |
| code_section()->relocate(inst_mark(), rspec); |
| movz(dst, 0xDEAD, 16); |
| movk(dst, 0xBEEF); |
| } |
| |
| void MacroAssembler::set_narrow_klass(Register dst, Klass* k) { |
| assert (UseCompressedClassPointers, "should only be used for compressed headers"); |
| assert (oop_recorder() != NULL, "this assembler needs an OopRecorder"); |
| int index = oop_recorder()->find_index(k); |
| assert(! Universe::heap()->is_in_reserved(k), "should not be an oop"); |
| |
| InstructionMark im(this); |
| RelocationHolder rspec = metadata_Relocation::spec(index); |
| code_section()->relocate(inst_mark(), rspec); |
| narrowKlass nk = Klass::encode_klass(k); |
| movz(dst, (nk >> 16), 16); |
| movk(dst, nk & 0xffff); |
| } |
| |
| void MacroAssembler::load_heap_oop(Register dst, Address src) |
| { |
| if (UseCompressedOops) { |
| ldrw(dst, src); |
| decode_heap_oop(dst); |
| } else { |
| ldr(dst, src); |
| } |
| } |
| |
| void MacroAssembler::load_heap_oop_not_null(Register dst, Address src) |
| { |
| if (UseCompressedOops) { |
| ldrw(dst, src); |
| decode_heap_oop_not_null(dst); |
| } else { |
| ldr(dst, src); |
| } |
| } |
| |
| void MacroAssembler::store_heap_oop(Address dst, Register src) { |
| if (UseCompressedOops) { |
| assert(!dst.uses(src), "not enough registers"); |
| encode_heap_oop(src); |
| strw(src, dst); |
| } else |
| str(src, dst); |
| } |
| |
| // Used for storing NULLs. |
| void MacroAssembler::store_heap_oop_null(Address dst) { |
| if (UseCompressedOops) { |
| strw(zr, dst); |
| } else |
| str(zr, dst); |
| } |
| |
| #if INCLUDE_ALL_GCS |
| void MacroAssembler::g1_write_barrier_pre(Register obj, |
| Register pre_val, |
| Register thread, |
| Register tmp, |
| bool tosca_live, |
| bool expand_call) { |
| // If expand_call is true then we expand the call_VM_leaf macro |
| // directly to skip generating the check by |
| // InterpreterMacroAssembler::call_VM_leaf_base that checks _last_sp. |
| |
| assert(thread == rthread, "must be"); |
| |
| Label done; |
| Label runtime; |
| |
| assert(pre_val != noreg, "check this code"); |
| |
| if (obj != noreg) |
| assert_different_registers(obj, pre_val, tmp); |
| |
| Address in_progress(thread, in_bytes(JavaThread::satb_mark_queue_offset() + |
| SATBMarkQueue::byte_offset_of_active())); |
| Address index(thread, in_bytes(JavaThread::satb_mark_queue_offset() + |
| SATBMarkQueue::byte_offset_of_index())); |
| Address buffer(thread, in_bytes(JavaThread::satb_mark_queue_offset() + |
| SATBMarkQueue::byte_offset_of_buf())); |
| |
| |
| // Is marking active? |
| if (in_bytes(SATBMarkQueue::byte_width_of_active()) == 4) { |
| ldrw(tmp, in_progress); |
| } else { |
| assert(in_bytes(SATBMarkQueue::byte_width_of_active()) == 1, "Assumption"); |
| ldrb(tmp, in_progress); |
| } |
| cbzw(tmp, done); |
| |
| // Do we need to load the previous value? |
| if (obj != noreg) { |
| load_heap_oop(pre_val, Address(obj, 0)); |
| } |
| |
| // Is the previous value null? |
| cbz(pre_val, done); |
| |
| // Can we store original value in the thread's buffer? |
| // Is index == 0? |
| // (The index field is typed as size_t.) |
| |
| ldr(tmp, index); // tmp := *index_adr |
| cbz(tmp, runtime); // tmp == 0? |
| // If yes, goto runtime |
| |
| sub(tmp, tmp, wordSize); // tmp := tmp - wordSize |
| str(tmp, index); // *index_adr := tmp |
| ldr(rscratch1, buffer); |
| add(tmp, tmp, rscratch1); // tmp := tmp + *buffer_adr |
| |
| // Record the previous value |
| str(pre_val, Address(tmp, 0)); |
| b(done); |
| |
| bind(runtime); |
| // save the live input values |
| push(r0->bit(tosca_live) | obj->bit(obj != noreg) | pre_val->bit(true), sp); |
| |
| // Calling the runtime using the regular call_VM_leaf mechanism generates |
| // code (generated by InterpreterMacroAssember::call_VM_leaf_base) |
| // that checks that the *(rfp+frame::interpreter_frame_last_sp) == NULL. |
| // |
| // If we care generating the pre-barrier without a frame (e.g. in the |
| // intrinsified Reference.get() routine) then ebp might be pointing to |
| // the caller frame and so this check will most likely fail at runtime. |
| // |
| // Expanding the call directly bypasses the generation of the check. |
| // So when we do not have have a full interpreter frame on the stack |
| // expand_call should be passed true. |
| |
| if (expand_call) { |
| assert(pre_val != c_rarg1, "smashed arg"); |
| pass_arg1(this, thread); |
| pass_arg0(this, pre_val); |
| MacroAssembler::call_VM_leaf_base(CAST_FROM_FN_PTR(address, SharedRuntime::g1_wb_pre), 2); |
| } else { |
| call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::g1_wb_pre), pre_val, thread); |
| } |
| |
| pop(r0->bit(tosca_live) | obj->bit(obj != noreg) | pre_val->bit(true), sp); |
| |
| bind(done); |
| } |
| |
| void MacroAssembler::g1_write_barrier_post(Register store_addr, |
| Register new_val, |
| Register thread, |
| Register tmp, |
| Register tmp2) { |
| assert(thread == rthread, "must be"); |
| |
| Address queue_index(thread, in_bytes(JavaThread::dirty_card_queue_offset() + |
| DirtyCardQueue::byte_offset_of_index())); |
| Address buffer(thread, in_bytes(JavaThread::dirty_card_queue_offset() + |
| DirtyCardQueue::byte_offset_of_buf())); |
| |
| BarrierSet* bs = Universe::heap()->barrier_set(); |
| CardTableModRefBS* ct = (CardTableModRefBS*)bs; |
| assert(sizeof(*ct->byte_map_base) == sizeof(jbyte), "adjust this code"); |
| |
| Label done; |
| Label runtime; |
| |
| // Does store cross heap regions? |
| |
| eor(tmp, store_addr, new_val); |
| lsr(tmp, tmp, HeapRegion::LogOfHRGrainBytes); |
| cbz(tmp, done); |
| |
| // crosses regions, storing NULL? |
| |
| cbz(new_val, done); |
| |
| // storing region crossing non-NULL, is card already dirty? |
| |
| ExternalAddress cardtable((address) ct->byte_map_base); |
| assert(sizeof(*ct->byte_map_base) == sizeof(jbyte), "adjust this code"); |
| const Register card_addr = tmp; |
| |
| lsr(card_addr, store_addr, CardTableModRefBS::card_shift); |
| |
| // get the address of the card |
| load_byte_map_base(tmp2); |
| add(card_addr, card_addr, tmp2); |
| ldrb(tmp2, Address(card_addr)); |
| cmpw(tmp2, (int)G1SATBCardTableModRefBS::g1_young_card_val()); |
| br(Assembler::EQ, done); |
| |
| assert((int)CardTableModRefBS::dirty_card_val() == 0, "must be 0"); |
| |
| membar(Assembler::StoreLoad); |
| |
| ldrb(tmp2, Address(card_addr)); |
| cbzw(tmp2, done); |
| |
| // storing a region crossing, non-NULL oop, card is clean. |
| // dirty card and log. |
| |
| strb(zr, Address(card_addr)); |
| |
| ldr(rscratch1, queue_index); |
| cbz(rscratch1, runtime); |
| sub(rscratch1, rscratch1, wordSize); |
| str(rscratch1, queue_index); |
| |
| ldr(tmp2, buffer); |
| str(card_addr, Address(tmp2, rscratch1)); |
| b(done); |
| |
| bind(runtime); |
| // save the live input values |
| push(store_addr->bit(true) | new_val->bit(true), sp); |
| call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::g1_wb_post), card_addr, thread); |
| pop(store_addr->bit(true) | new_val->bit(true), sp); |
| |
| bind(done); |
| } |
| |
| #endif // INCLUDE_ALL_GCS |
| |
| Address MacroAssembler::allocate_metadata_address(Metadata* obj) { |
| assert(oop_recorder() != NULL, "this assembler needs a Recorder"); |
| int index = oop_recorder()->allocate_metadata_index(obj); |
| RelocationHolder rspec = metadata_Relocation::spec(index); |
| return Address((address)obj, rspec); |
| } |
| |
| // Move an oop into a register. immediate is true if we want |
| // immediate instrcutions, i.e. we are not going to patch this |
| // instruction while the code is being executed by another thread. In |
| // that case we can use move immediates rather than the constant pool. |
| void MacroAssembler::movoop(Register dst, jobject obj, bool immediate) { |
| int oop_index; |
| if (obj == NULL) { |
| oop_index = oop_recorder()->allocate_oop_index(obj); |
| } else { |
| oop_index = oop_recorder()->find_index(obj); |
| assert(Universe::heap()->is_in_reserved(JNIHandles::resolve(obj)), "should be real oop"); |
| } |
| RelocationHolder rspec = oop_Relocation::spec(oop_index); |
| if (! immediate) { |
| address dummy = address(uintptr_t(pc()) & -wordSize); // A nearby aligned address |
| ldr_constant(dst, Address(dummy, rspec)); |
| } else |
| mov(dst, Address((address)obj, rspec)); |
| } |
| |
| // Move a metadata address into a register. |
| void MacroAssembler::mov_metadata(Register dst, Metadata* obj) { |
| int oop_index; |
| if (obj == NULL) { |
| oop_index = oop_recorder()->allocate_metadata_index(obj); |
| } else { |
| oop_index = oop_recorder()->find_index(obj); |
| } |
| RelocationHolder rspec = metadata_Relocation::spec(oop_index); |
| mov(dst, Address((address)obj, rspec)); |
| } |
| |
| Address MacroAssembler::constant_oop_address(jobject obj) { |
| assert(oop_recorder() != NULL, "this assembler needs an OopRecorder"); |
| assert(Universe::heap()->is_in_reserved(JNIHandles::resolve(obj)), "not an oop"); |
| int oop_index = oop_recorder()->find_index(obj); |
| return Address((address)obj, oop_Relocation::spec(oop_index)); |
| } |
| |
| // Defines obj, preserves var_size_in_bytes, okay for t2 == var_size_in_bytes. |
| void MacroAssembler::tlab_allocate(Register obj, |
| Register var_size_in_bytes, |
| int con_size_in_bytes, |
| Register t1, |
| Register t2, |
| Label& slow_case) { |
| assert_different_registers(obj, t2); |
| assert_different_registers(obj, var_size_in_bytes); |
| Register end = t2; |
| |
| // verify_tlab(); |
| |
| ldr(obj, Address(rthread, JavaThread::tlab_top_offset())); |
| if (var_size_in_bytes == noreg) { |
| lea(end, Address(obj, con_size_in_bytes)); |
| } else { |
| lea(end, Address(obj, var_size_in_bytes)); |
| } |
| ldr(rscratch1, Address(rthread, JavaThread::tlab_end_offset())); |
| cmp(end, rscratch1); |
| br(Assembler::HI, slow_case); |
| |
| // update the tlab top pointer |
| str(end, Address(rthread, JavaThread::tlab_top_offset())); |
| |
| // recover var_size_in_bytes if necessary |
| if (var_size_in_bytes == end) { |
| sub(var_size_in_bytes, var_size_in_bytes, obj); |
| } |
| // verify_tlab(); |
| } |
| |
| // Preserves r19, and r3. |
| Register MacroAssembler::tlab_refill(Label& retry, |
| Label& try_eden, |
| Label& slow_case) { |
| Register top = r0; |
| Register t1 = r2; |
| Register t2 = r4; |
| assert_different_registers(top, rthread, t1, t2, /* preserve: */ r19, r3); |
| Label do_refill, discard_tlab; |
| |
| if (!Universe::heap()->supports_inline_contig_alloc()) { |
| // No allocation in the shared eden. |
| b(slow_case); |
| } |
| |
| ldr(top, Address(rthread, in_bytes(JavaThread::tlab_top_offset()))); |
| ldr(t1, Address(rthread, in_bytes(JavaThread::tlab_end_offset()))); |
| |
| // calculate amount of free space |
| sub(t1, t1, top); |
| lsr(t1, t1, LogHeapWordSize); |
| |
| // Retain tlab and allocate object in shared space if |
| // the amount free in the tlab is too large to discard. |
| |
| ldr(rscratch1, Address(rthread, in_bytes(JavaThread::tlab_refill_waste_limit_offset()))); |
| cmp(t1, rscratch1); |
| br(Assembler::LE, discard_tlab); |
| |
| // Retain |
| // ldr(rscratch1, Address(rthread, in_bytes(JavaThread::tlab_refill_waste_limit_offset()))); |
| mov(t2, (int32_t) ThreadLocalAllocBuffer::refill_waste_limit_increment()); |
| add(rscratch1, rscratch1, t2); |
| str(rscratch1, Address(rthread, in_bytes(JavaThread::tlab_refill_waste_limit_offset()))); |
| |
| if (TLABStats) { |
| // increment number of slow_allocations |
| addmw(Address(rthread, in_bytes(JavaThread::tlab_slow_allocations_offset())), |
| 1, rscratch1); |
| } |
| b(try_eden); |
| |
| bind(discard_tlab); |
| if (TLABStats) { |
| // increment number of refills |
| addmw(Address(rthread, in_bytes(JavaThread::tlab_number_of_refills_offset())), 1, |
| rscratch1); |
| // accumulate wastage -- t1 is amount free in tlab |
| addmw(Address(rthread, in_bytes(JavaThread::tlab_fast_refill_waste_offset())), t1, |
| rscratch1); |
| } |
| |
| // if tlab is currently allocated (top or end != null) then |
| // fill [top, end + alignment_reserve) with array object |
| cbz(top, do_refill); |
| |
| // set up the mark word |
| mov(rscratch1, (intptr_t)markOopDesc::prototype()->copy_set_hash(0x2)); |
| str(rscratch1, Address(top, oopDesc::mark_offset_in_bytes())); |
| // set the length to the remaining space |
| sub(t1, t1, typeArrayOopDesc::header_size(T_INT)); |
| add(t1, t1, (int32_t)ThreadLocalAllocBuffer::alignment_reserve()); |
| lsl(t1, t1, log2_intptr(HeapWordSize/sizeof(jint))); |
| strw(t1, Address(top, arrayOopDesc::length_offset_in_bytes())); |
| // set klass to intArrayKlass |
| { |
| unsigned long offset; |
| // dubious reloc why not an oop reloc? |
| adrp(rscratch1, ExternalAddress((address)Universe::intArrayKlassObj_addr()), |
| offset); |
| ldr(t1, Address(rscratch1, offset)); |
| } |
| // store klass last. concurrent gcs assumes klass length is valid if |
| // klass field is not null. |
| store_klass(top, t1); |
| |
| mov(t1, top); |
| ldr(rscratch1, Address(rthread, in_bytes(JavaThread::tlab_start_offset()))); |
| sub(t1, t1, rscratch1); |
| incr_allocated_bytes(rthread, t1, 0, rscratch1); |
| |
| // refill the tlab with an eden allocation |
| bind(do_refill); |
| ldr(t1, Address(rthread, in_bytes(JavaThread::tlab_size_offset()))); |
| lsl(t1, t1, LogHeapWordSize); |
| // allocate new tlab, address returned in top |
| eden_allocate(top, t1, 0, t2, slow_case); |
| |
| // Check that t1 was preserved in eden_allocate. |
| #ifdef ASSERT |
| if (UseTLAB) { |
| Label ok; |
| Register tsize = r4; |
| assert_different_registers(tsize, rthread, t1); |
| str(tsize, Address(pre(sp, -16))); |
| ldr(tsize, Address(rthread, in_bytes(JavaThread::tlab_size_offset()))); |
| lsl(tsize, tsize, LogHeapWordSize); |
| cmp(t1, tsize); |
| br(Assembler::EQ, ok); |
| STOP("assert(t1 != tlab size)"); |
| should_not_reach_here(); |
| |
| bind(ok); |
| ldr(tsize, Address(post(sp, 16))); |
| } |
| #endif |
| str(top, Address(rthread, in_bytes(JavaThread::tlab_start_offset()))); |
| str(top, Address(rthread, in_bytes(JavaThread::tlab_top_offset()))); |
| add(top, top, t1); |
| sub(top, top, (int32_t)ThreadLocalAllocBuffer::alignment_reserve_in_bytes()); |
| str(top, Address(rthread, in_bytes(JavaThread::tlab_end_offset()))); |
| verify_tlab(); |
| b(retry); |
| |
| return rthread; // for use by caller |
| } |
| |
| // Defines obj, preserves var_size_in_bytes |
| void MacroAssembler::eden_allocate(Register obj, |
| Register var_size_in_bytes, |
| int con_size_in_bytes, |
| Register t1, |
| Label& slow_case) { |
| assert_different_registers(obj, var_size_in_bytes, t1); |
| if (!Universe::heap()->supports_inline_contig_alloc()) { |
| b(slow_case); |
| } else { |
| Register end = t1; |
| Register heap_end = rscratch2; |
| Label retry; |
| bind(retry); |
| { |
| unsigned long offset; |
| adrp(rscratch1, ExternalAddress((address) Universe::heap()->end_addr()), offset); |
| ldr(heap_end, Address(rscratch1, offset)); |
| } |
| |
| ExternalAddress heap_top((address) Universe::heap()->top_addr()); |
| |
| // Get the current top of the heap |
| { |
| unsigned long offset; |
| adrp(rscratch1, heap_top, offset); |
| // Use add() here after ARDP, rather than lea(). |
| // lea() does not generate anything if its offset is zero. |
| // However, relocs expect to find either an ADD or a load/store |
| // insn after an ADRP. add() always generates an ADD insn, even |
| // for add(Rn, Rn, 0). |
| add(rscratch1, rscratch1, offset); |
| ldaxr(obj, rscratch1); |
| } |
| |
| // Adjust it my the size of our new object |
| if (var_size_in_bytes == noreg) { |
| lea(end, Address(obj, con_size_in_bytes)); |
| } else { |
| lea(end, Address(obj, var_size_in_bytes)); |
| } |
| |
| // if end < obj then we wrapped around high memory |
| cmp(end, obj); |
| br(Assembler::LO, slow_case); |
| |
| cmp(end, heap_end); |
| br(Assembler::HI, slow_case); |
| |
| // If heap_top hasn't been changed by some other thread, update it. |
| stlxr(rscratch2, end, rscratch1); |
| cbnzw(rscratch2, retry); |
| } |
| } |
| |
| void MacroAssembler::verify_tlab() { |
| #ifdef ASSERT |
| if (UseTLAB && VerifyOops) { |
| Label next, ok; |
| |
| stp(rscratch2, rscratch1, Address(pre(sp, -16))); |
| |
| ldr(rscratch2, Address(rthread, in_bytes(JavaThread::tlab_top_offset()))); |
| ldr(rscratch1, Address(rthread, in_bytes(JavaThread::tlab_start_offset()))); |
| cmp(rscratch2, rscratch1); |
| br(Assembler::HS, next); |
| STOP("assert(top >= start)"); |
| should_not_reach_here(); |
| |
| bind(next); |
| ldr(rscratch2, Address(rthread, in_bytes(JavaThread::tlab_end_offset()))); |
| ldr(rscratch1, Address(rthread, in_bytes(JavaThread::tlab_top_offset()))); |
| cmp(rscratch2, rscratch1); |
| br(Assembler::HS, ok); |
| STOP("assert(top <= end)"); |
| should_not_reach_here(); |
| |
| bind(ok); |
| ldp(rscratch2, rscratch1, Address(post(sp, 16))); |
| } |
| #endif |
| } |
| |
| // Writes to stack successive pages until offset reached to check for |
| // stack overflow + shadow pages. This clobbers tmp. |
| void MacroAssembler::bang_stack_size(Register size, Register tmp) { |
| assert_different_registers(tmp, size, rscratch1); |
| mov(tmp, sp); |
| // Bang stack for total size given plus shadow page size. |
| // Bang one page at a time because large size can bang beyond yellow and |
| // red zones. |
| Label loop; |
| mov(rscratch1, os::vm_page_size()); |
| bind(loop); |
| lea(tmp, Address(tmp, -os::vm_page_size())); |
| subsw(size, size, rscratch1); |
| str(size, Address(tmp)); |
| br(Assembler::GT, loop); |
| |
| // Bang down shadow pages too. |
| // At this point, (tmp-0) is the last address touched, so don't |
| // touch it again. (It was touched as (tmp-pagesize) but then tmp |
| // was post-decremented.) Skip this address by starting at i=1, and |
| // touch a few more pages below. N.B. It is important to touch all |
| // the way down to and including i=StackShadowPages. |
| for (int i = 0; i < (int)(JavaThread::stack_shadow_zone_size() / os::vm_page_size()) - 1; i++) { |
| // this could be any sized move but this is can be a debugging crumb |
| // so the bigger the better. |
| lea(tmp, Address(tmp, -os::vm_page_size())); |
| str(size, Address(tmp)); |
| } |
| } |
| |
| |
| address MacroAssembler::read_polling_page(Register r, address page, relocInfo::relocType rtype) { |
| unsigned long off; |
| adrp(r, Address(page, rtype), off); |
| InstructionMark im(this); |
| code_section()->relocate(inst_mark(), rtype); |
| ldrw(zr, Address(r, off)); |
| return inst_mark(); |
| } |
| |
| address MacroAssembler::read_polling_page(Register r, relocInfo::relocType rtype) { |
| InstructionMark im(this); |
| code_section()->relocate(inst_mark(), rtype); |
| ldrw(zr, Address(r, 0)); |
| return inst_mark(); |
| } |
| |
| void MacroAssembler::adrp(Register reg1, const Address &dest, unsigned long &byte_offset) { |
| relocInfo::relocType rtype = dest.rspec().reloc()->type(); |
| unsigned long low_page = (unsigned long)CodeCache::low_bound() >> 12; |
| unsigned long high_page = (unsigned long)(CodeCache::high_bound()-1) >> 12; |
| unsigned long dest_page = (unsigned long)dest.target() >> 12; |
| long offset_low = dest_page - low_page; |
| long offset_high = dest_page - high_page; |
| |
| assert(is_valid_AArch64_address(dest.target()), "bad address"); |
| assert(dest.getMode() == Address::literal, "ADRP must be applied to a literal address"); |
| |
| InstructionMark im(this); |
| code_section()->relocate(inst_mark(), dest.rspec()); |
| // 8143067: Ensure that the adrp can reach the dest from anywhere within |
| // the code cache so that if it is relocated we know it will still reach |
| if (offset_high >= -(1<<20) && offset_low < (1<<20)) { |
| _adrp(reg1, dest.target()); |
| } else { |
| unsigned long target = (unsigned long)dest.target(); |
| unsigned long adrp_target |
| = (target & 0xffffffffUL) | ((unsigned long)pc() & 0xffff00000000UL); |
| |
| _adrp(reg1, (address)adrp_target); |
| movk(reg1, target >> 32, 32); |
| } |
| byte_offset = (unsigned long)dest.target() & 0xfff; |
| } |
| |
| void MacroAssembler::load_byte_map_base(Register reg) { |
| jbyte *byte_map_base = |
| ((CardTableModRefBS*)(Universe::heap()->barrier_set()))->byte_map_base; |
| |
| if (is_valid_AArch64_address((address)byte_map_base)) { |
| // Strictly speaking the byte_map_base isn't an address at all, |
| // and it might even be negative. |
| unsigned long offset; |
| adrp(reg, ExternalAddress((address)byte_map_base), offset); |
| assert(offset == 0, "misaligned card table base"); |
| } else { |
| mov(reg, (uint64_t)byte_map_base); |
| } |
| } |
| |
| void MacroAssembler::build_frame(int framesize) { |
| assert(framesize > 0, "framesize must be > 0"); |
| if (framesize < ((1 << 9) + 2 * wordSize)) { |
| sub(sp, sp, framesize); |
| stp(rfp, lr, Address(sp, framesize - 2 * wordSize)); |
| if (PreserveFramePointer) add(rfp, sp, framesize - 2 * wordSize); |
| } else { |
| stp(rfp, lr, Address(pre(sp, -2 * wordSize))); |
| if (PreserveFramePointer) mov(rfp, sp); |
| if (framesize < ((1 << 12) + 2 * wordSize)) |
| sub(sp, sp, framesize - 2 * wordSize); |
| else { |
| mov(rscratch1, framesize - 2 * wordSize); |
| sub(sp, sp, rscratch1); |
| } |
| } |
| } |
| |
| void MacroAssembler::remove_frame(int framesize) { |
| assert(framesize > 0, "framesize must be > 0"); |
| if (framesize < ((1 << 9) + 2 * wordSize)) { |
| ldp(rfp, lr, Address(sp, framesize - 2 * wordSize)); |
| add(sp, sp, framesize); |
| } else { |
| if (framesize < ((1 << 12) + 2 * wordSize)) |
| add(sp, sp, framesize - 2 * wordSize); |
| else { |
| mov(rscratch1, framesize - 2 * wordSize); |
| add(sp, sp, rscratch1); |
| } |
| ldp(rfp, lr, Address(post(sp, 2 * wordSize))); |
| } |
| } |
| |
| |
| // Search for str1 in str2 and return index or -1 |
| void MacroAssembler::string_indexof(Register str2, Register str1, |
| Register cnt2, Register cnt1, |
| Register tmp1, Register tmp2, |
| Register tmp3, Register tmp4, |
| int icnt1, Register result) { |
| Label BM, LINEARSEARCH, DONE, NOMATCH, MATCH; |
| |
| Register ch1 = rscratch1; |
| Register ch2 = rscratch2; |
| Register cnt1tmp = tmp1; |
| Register cnt2tmp = tmp2; |
| Register cnt1_neg = cnt1; |
| Register cnt2_neg = cnt2; |
| Register result_tmp = tmp4; |
| |
| // Note, inline_string_indexOf() generates checks: |
| // if (substr.count > string.count) return -1; |
| // if (substr.count == 0) return 0; |
| |
| // We have two strings, a source string in str2, cnt2 and a pattern string |
| // in str1, cnt1. Find the 1st occurence of pattern in source or return -1. |
| |
| // For larger pattern and source we use a simplified Boyer Moore algorithm. |
| // With a small pattern and source we use linear scan. |
| |
| if (icnt1 == -1) { |
| cmp(cnt1, 256); // Use Linear Scan if cnt1 < 8 || cnt1 >= 256 |
| ccmp(cnt1, 8, 0b0000, LO); // Can't handle skip >= 256 because we use |
| br(LO, LINEARSEARCH); // a byte array. |
| cmp(cnt1, cnt2, LSR, 2); // Source must be 4 * pattern for BM |
| br(HS, LINEARSEARCH); |
| } |
| |
| // The Boyer Moore alogorithm is based on the description here:- |
| // |
| // http://en.wikipedia.org/wiki/Boyer%E2%80%93Moore_string_search_algorithm |
| // |
| // This describes and algorithm with 2 shift rules. The 'Bad Character' rule |
| // and the 'Good Suffix' rule. |
| // |
| // These rules are essentially heuristics for how far we can shift the |
| // pattern along the search string. |
| // |
| // The implementation here uses the 'Bad Character' rule only because of the |
| // complexity of initialisation for the 'Good Suffix' rule. |
| // |
| // This is also known as the Boyer-Moore-Horspool algorithm:- |
| // |
| // http://en.wikipedia.org/wiki/Boyer-Moore-Horspool_algorithm |
| // |
| // #define ASIZE 128 |
| // |
| // int bm(unsigned char *x, int m, unsigned char *y, int n) { |
| // int i, j; |
| // unsigned c; |
| // unsigned char bc[ASIZE]; |
| // |
| // /* Preprocessing */ |
| // for (i = 0; i < ASIZE; ++i) |
| // bc[i] = 0; |
| // for (i = 0; i < m - 1; ) { |
| // c = x[i]; |
| // ++i; |
| // if (c < ASIZE) bc[c] = i; |
| // } |
| // |
| // /* Searching */ |
| // j = 0; |
| // while (j <= n - m) { |
| // c = y[i+j]; |
| // if (x[m-1] == c) |
| // for (i = m - 2; i >= 0 && x[i] == y[i + j]; --i); |
| // if (i < 0) return j; |
| // if (c < ASIZE) |
| // j = j - bc[y[j+m-1]] + m; |
| // else |
| // j += 1; // Advance by 1 only if char >= ASIZE |
| // } |
| // } |
| |
| if (icnt1 == -1) { |
| BIND(BM); |
| |
| Label ZLOOP, BCLOOP, BCSKIP, BMLOOPSTR2, BMLOOPSTR1, BMSKIP; |
| Label BMADV, BMMATCH, BMCHECKEND; |
| |
| Register cnt1end = tmp2; |
| Register str2end = cnt2; |
| Register skipch = tmp2; |
| |
| // Restrict ASIZE to 128 to reduce stack space/initialisation. |
| // The presence of chars >= ASIZE in the target string does not affect |
| // performance, but we must be careful not to initialise them in the stack |
| // array. |
| // The presence of chars >= ASIZE in the source string may adversely affect |
| // performance since we can only advance by one when we encounter one. |
| |
| stp(zr, zr, pre(sp, -128)); |
| for (int i = 1; i < 8; i++) |
| stp(zr, zr, Address(sp, i*16)); |
| |
| mov(cnt1tmp, 0); |
| sub(cnt1end, cnt1, 1); |
| BIND(BCLOOP); |
| ldrh(ch1, Address(str1, cnt1tmp, Address::lsl(1))); |
| cmp(ch1, 128); |
| add(cnt1tmp, cnt1tmp, 1); |
| br(HS, BCSKIP); |
| strb(cnt1tmp, Address(sp, ch1)); |
| BIND(BCSKIP); |
| cmp(cnt1tmp, cnt1end); |
| br(LT, BCLOOP); |
| |
| mov(result_tmp, str2); |
| |
| sub(cnt2, cnt2, cnt1); |
| add(str2end, str2, cnt2, LSL, 1); |
| BIND(BMLOOPSTR2); |
| sub(cnt1tmp, cnt1, 1); |
| ldrh(ch1, Address(str1, cnt1tmp, Address::lsl(1))); |
| ldrh(skipch, Address(str2, cnt1tmp, Address::lsl(1))); |
| cmp(ch1, skipch); |
| br(NE, BMSKIP); |
| subs(cnt1tmp, cnt1tmp, 1); |
| br(LT, BMMATCH); |
| BIND(BMLOOPSTR1); |
| ldrh(ch1, Address(str1, cnt1tmp, Address::lsl(1))); |
| ldrh(ch2, Address(str2, cnt1tmp, Address::lsl(1))); |
| cmp(ch1, ch2); |
| br(NE, BMSKIP); |
| subs(cnt1tmp, cnt1tmp, 1); |
| br(GE, BMLOOPSTR1); |
| BIND(BMMATCH); |
| sub(result_tmp, str2, result_tmp); |
| lsr(result, result_tmp, 1); |
| add(sp, sp, 128); |
| b(DONE); |
| BIND(BMADV); |
| add(str2, str2, 2); |
| b(BMCHECKEND); |
| BIND(BMSKIP); |
| cmp(skipch, 128); |
| br(HS, BMADV); |
| ldrb(ch2, Address(sp, skipch)); |
| add(str2, str2, cnt1, LSL, 1); |
| sub(str2, str2, ch2, LSL, 1); |
| BIND(BMCHECKEND); |
| cmp(str2, str2end); |
| br(LE, BMLOOPSTR2); |
| add(sp, sp, 128); |
| b(NOMATCH); |
| } |
| |
| BIND(LINEARSEARCH); |
| { |
| Label DO1, DO2, DO3; |
| |
| Register str2tmp = tmp2; |
| Register first = tmp3; |
| |
| if (icnt1 == -1) |
| { |
| Label DOSHORT, FIRST_LOOP, STR2_NEXT, STR1_LOOP, STR1_NEXT, LAST_WORD; |
| |
| cmp(cnt1, 4); |
| br(LT, DOSHORT); |
| |
| sub(cnt2, cnt2, cnt1); |
| sub(cnt1, cnt1, 4); |
| mov(result_tmp, cnt2); |
| |
| lea(str1, Address(str1, cnt1, Address::uxtw(1))); |
| lea(str2, Address(str2, cnt2, Address::uxtw(1))); |
| sub(cnt1_neg, zr, cnt1, LSL, 1); |
| sub(cnt2_neg, zr, cnt2, LSL, 1); |
| ldr(first, Address(str1, cnt1_neg)); |
| |
| BIND(FIRST_LOOP); |
| ldr(ch2, Address(str2, cnt2_neg)); |
| cmp(first, ch2); |
| br(EQ, STR1_LOOP); |
| BIND(STR2_NEXT); |
| adds(cnt2_neg, cnt2_neg, 2); |
| br(LE, FIRST_LOOP); |
| b(NOMATCH); |
| |
| BIND(STR1_LOOP); |
| adds(cnt1tmp, cnt1_neg, 8); |
| add(cnt2tmp, cnt2_neg, 8); |
| br(GE, LAST_WORD); |
| |
| BIND(STR1_NEXT); |
| ldr(ch1, Address(str1, cnt1tmp)); |
| ldr(ch2, Address(str2, cnt2tmp)); |
| cmp(ch1, ch2); |
| br(NE, STR2_NEXT); |
| adds(cnt1tmp, cnt1tmp, 8); |
| add(cnt2tmp, cnt2tmp, 8); |
| br(LT, STR1_NEXT); |
| |
| BIND(LAST_WORD); |
| ldr(ch1, Address(str1)); |
| sub(str2tmp, str2, cnt1_neg); // adjust to corresponding |
| ldr(ch2, Address(str2tmp, cnt2_neg)); // word in str2 |
| cmp(ch1, ch2); |
| br(NE, STR2_NEXT); |
| b(MATCH); |
| |
| BIND(DOSHORT); |
| cmp(cnt1, 2); |
| br(LT, DO1); |
| br(GT, DO3); |
| } |
| |
| if (icnt1 == 4) { |
| Label CH1_LOOP; |
| |
| ldr(ch1, str1); |
| sub(cnt2, cnt2, 4); |
| mov(result_tmp, cnt2); |
| lea(str2, Address(str2, cnt2, Address::uxtw(1))); |
| sub(cnt2_neg, zr, cnt2, LSL, 1); |
| |
| BIND(CH1_LOOP); |
| ldr(ch2, Address(str2, cnt2_neg)); |
| cmp(ch1, ch2); |
| br(EQ, MATCH); |
| adds(cnt2_neg, cnt2_neg, 2); |
| br(LE, CH1_LOOP); |
| b(NOMATCH); |
| } |
| |
| if (icnt1 == -1 || icnt1 == 2) { |
| Label CH1_LOOP; |
| |
| BIND(DO2); |
| ldrw(ch1, str1); |
| sub(cnt2, cnt2, 2); |
| mov(result_tmp, cnt2); |
| lea(str2, Address(str2, cnt2, Address::uxtw(1))); |
| sub(cnt2_neg, zr, cnt2, LSL, 1); |
| |
| BIND(CH1_LOOP); |
| ldrw(ch2, Address(str2, cnt2_neg)); |
| cmp(ch1, ch2); |
| br(EQ, MATCH); |
| adds(cnt2_neg, cnt2_neg, 2); |
| br(LE, CH1_LOOP); |
| b(NOMATCH); |
| } |
| |
| if (icnt1 == -1 || icnt1 == 3) { |
| Label FIRST_LOOP, STR2_NEXT, STR1_LOOP; |
| |
| BIND(DO3); |
| ldrw(first, str1); |
| ldrh(ch1, Address(str1, 4)); |
| |
| sub(cnt2, cnt2, 3); |
| mov(result_tmp, cnt2); |
| lea(str2, Address(str2, cnt2, Address::uxtw(1))); |
| sub(cnt2_neg, zr, cnt2, LSL, 1); |
| |
| BIND(FIRST_LOOP); |
| ldrw(ch2, Address(str2, cnt2_neg)); |
| cmpw(first, ch2); |
| br(EQ, STR1_LOOP); |
| BIND(STR2_NEXT); |
| adds(cnt2_neg, cnt2_neg, 2); |
| br(LE, FIRST_LOOP); |
| b(NOMATCH); |
| |
| BIND(STR1_LOOP); |
| add(cnt2tmp, cnt2_neg, 4); |
| ldrh(ch2, Address(str2, cnt2tmp)); |
| cmp(ch1, ch2); |
| br(NE, STR2_NEXT); |
| b(MATCH); |
| } |
| |
| if (icnt1 == -1 || icnt1 == 1) { |
| Label CH1_LOOP, HAS_ZERO; |
| Label DO1_SHORT, DO1_LOOP; |
| |
| BIND(DO1); |
| ldrh(ch1, str1); |
| cmp(cnt2, 4); |
| br(LT, DO1_SHORT); |
| |
| orr(ch1, ch1, ch1, LSL, 16); |
| orr(ch1, ch1, ch1, LSL, 32); |
| |
| sub(cnt2, cnt2, 4); |
| mov(result_tmp, cnt2); |
| lea(str2, Address(str2, cnt2, Address::uxtw(1))); |
| sub(cnt2_neg, zr, cnt2, LSL, 1); |
| |
| mov(tmp3, 0x0001000100010001); |
| BIND(CH1_LOOP); |
| ldr(ch2, Address(str2, cnt2_neg)); |
| eor(ch2, ch1, ch2); |
| sub(tmp1, ch2, tmp3); |
| orr(tmp2, ch2, 0x7fff7fff7fff7fff); |
| bics(tmp1, tmp1, tmp2); |
| br(NE, HAS_ZERO); |
| adds(cnt2_neg, cnt2_neg, 8); |
| br(LT, CH1_LOOP); |
| |
| cmp(cnt2_neg, 8); |
| mov(cnt2_neg, 0); |
| br(LT, CH1_LOOP); |
| b(NOMATCH); |
| |
| BIND(HAS_ZERO); |
| rev(tmp1, tmp1); |
| clz(tmp1, tmp1); |
| add(cnt2_neg, cnt2_neg, tmp1, LSR, 3); |
| b(MATCH); |
| |
| BIND(DO1_SHORT); |
| mov(result_tmp, cnt2); |
| lea(str2, Address(str2, cnt2, Address::uxtw(1))); |
| sub(cnt2_neg, zr, cnt2, LSL, 1); |
| BIND(DO1_LOOP); |
| ldrh(ch2, Address(str2, cnt2_neg)); |
| cmpw(ch1, ch2); |
| br(EQ, MATCH); |
| adds(cnt2_neg, cnt2_neg, 2); |
| br(LT, DO1_LOOP); |
| } |
| } |
| BIND(NOMATCH); |
| mov(result, -1); |
| b(DONE); |
| BIND(MATCH); |
| add(result, result_tmp, cnt2_neg, ASR, 1); |
| BIND(DONE); |
| } |
| |
| // Compare strings. |
| void MacroAssembler::string_compare(Register str1, Register str2, |
| Register cnt1, Register cnt2, Register result, |
| Register tmp1) { |
| Label LENGTH_DIFF, DONE, SHORT_LOOP, SHORT_STRING, |
| NEXT_WORD, DIFFERENCE; |
| |
| BLOCK_COMMENT("string_compare {"); |
| |
| // Compute the minimum of the string lengths and save the difference. |
| subsw(tmp1, cnt1, cnt2); |
| cselw(cnt2, cnt1, cnt2, Assembler::LE); // min |
| |
| // A very short string |
| cmpw(cnt2, 4); |
| br(Assembler::LT, SHORT_STRING); |
| |
| // Check if the strings start at the same location. |
| cmp(str1, str2); |
| br(Assembler::EQ, LENGTH_DIFF); |
| |
| // Compare longwords |
| { |
| subw(cnt2, cnt2, 4); // The last longword is a special case |
| |
| // Move both string pointers to the last longword of their |
| // strings, negate the remaining count, and convert it to bytes. |
| lea(str1, Address(str1, cnt2, Address::uxtw(1))); |
| lea(str2, Address(str2, cnt2, Address::uxtw(1))); |
| sub(cnt2, zr, cnt2, LSL, 1); |
| |
| // Loop, loading longwords and comparing them into rscratch2. |
| bind(NEXT_WORD); |
| ldr(result, Address(str1, cnt2)); |
| ldr(cnt1, Address(str2, cnt2)); |
| adds(cnt2, cnt2, wordSize); |
| eor(rscratch2, result, cnt1); |
| cbnz(rscratch2, DIFFERENCE); |
| br(Assembler::LT, NEXT_WORD); |
| |
| // Last longword. In the case where length == 4 we compare the |
| // same longword twice, but that's still faster than another |
| // conditional branch. |
| |
| ldr(result, Address(str1)); |
| ldr(cnt1, Address(str2)); |
| eor(rscratch2, result, cnt1); |
| cbz(rscratch2, LENGTH_DIFF); |
| |
| // Find the first different characters in the longwords and |
| // compute their difference. |
| bind(DIFFERENCE); |
| rev(rscratch2, rscratch2); |
| clz(rscratch2, rscratch2); |
| andr(rscratch2, rscratch2, -16); |
| lsrv(result, result, rscratch2); |
| uxthw(result, result); |
| lsrv(cnt1, cnt1, rscratch2); |
| uxthw(cnt1, cnt1); |
| subw(result, result, cnt1); |
| b(DONE); |
| } |
| |
| bind(SHORT_STRING); |
| // Is the minimum length zero? |
| cbz(cnt2, LENGTH_DIFF); |
| |
| bind(SHORT_LOOP); |
| load_unsigned_short(result, Address(post(str1, 2))); |
| load_unsigned_short(cnt1, Address(post(str2, 2))); |
| subw(result, result, cnt1); |
| cbnz(result, DONE); |
| sub(cnt2, cnt2, 1); |
| cbnz(cnt2, SHORT_LOOP); |
| |
| // Strings are equal up to min length. Return the length difference. |
| bind(LENGTH_DIFF); |
| mov(result, tmp1); |
| |
| // That's it |
| bind(DONE); |
| |
| BLOCK_COMMENT("} string_compare"); |
| } |
| |
| // Compare Strings or char/byte arrays. |
| |
| // is_string is true iff this is a string comparison. |
| |
| // For Strings we're passed the address of the first characters in a1 |
| // and a2 and the length in cnt1. |
| |
| // For byte and char arrays we're passed the arrays themselves and we |
| // have to extract length fields and do null checks here. |
| |
| // elem_size is the element size in bytes: either 1 or 2. |
| |
| // There are two implementations. For arrays >= 8 bytes, all |
| // comparisons (including the final one, which may overlap) are |
| // performed 8 bytes at a time. For arrays < 8 bytes, we compare a |
| // halfword, then a short, and then a byte. |
| |
| void MacroAssembler::arrays_equals(Register a1, Register a2, |
| Register result, Register cnt1, |
| int elem_size, bool is_string) |
| { |
| Label SAME, DONE, SHORT, NEXT_WORD, ONE; |
| Register tmp1 = rscratch1; |
| Register tmp2 = rscratch2; |
| Register cnt2 = tmp2; // cnt2 only used in array length compare |
| int elem_per_word = wordSize/elem_size; |
| int log_elem_size = exact_log2(elem_size); |
| int length_offset = arrayOopDesc::length_offset_in_bytes(); |
| int base_offset |
| = arrayOopDesc::base_offset_in_bytes(elem_size == 2 ? T_CHAR : T_BYTE); |
| |
| assert(elem_size == 1 || elem_size == 2, "must be char or byte"); |
| assert_different_registers(a1, a2, result, cnt1, rscratch1, rscratch2); |
| |
| BLOCK_COMMENT(is_string ? "string_equals {" : "array_equals {"); |
| |
| mov(result, false); |
| |
| if (!is_string) { |
| // if (a==a2) |
| // return true; |
| eor(rscratch1, a1, a2); |
| cbz(rscratch1, SAME); |
| // if (a==null || a2==null) |
| // return false; |
| cbz(a1, DONE); |
| cbz(a2, DONE); |
| // if (a1.length != a2.length) |
| // return false; |
| ldrw(cnt1, Address(a1, length_offset)); |
| ldrw(cnt2, Address(a2, length_offset)); |
| eorw(tmp1, cnt1, cnt2); |
| cbnzw(tmp1, DONE); |
| |
| lea(a1, Address(a1, base_offset)); |
| lea(a2, Address(a2, base_offset)); |
| } |
| |
| // Check for short strings, i.e. smaller than wordSize. |
| subs(cnt1, cnt1, elem_per_word); |
| br(Assembler::LT, SHORT); |
| // Main 8 byte comparison loop. |
| bind(NEXT_WORD); { |
| ldr(tmp1, Address(post(a1, wordSize))); |
| ldr(tmp2, Address(post(a2, wordSize))); |
| subs(cnt1, cnt1, elem_per_word); |
| eor(tmp1, tmp1, tmp2); |
| cbnz(tmp1, DONE); |
| } br(GT, NEXT_WORD); |
| // Last longword. In the case where length == 4 we compare the |
| // same longword twice, but that's still faster than another |
| // conditional branch. |
| // cnt1 could be 0, -1, -2, -3, -4 for chars; -4 only happens when |
| // length == 4. |
| if (log_elem_size > 0) |
| lsl(cnt1, cnt1, log_elem_size); |
| ldr(tmp1, Address(a1, cnt1)); |
| ldr(tmp2, Address(a2, cnt1)); |
| eor(tmp1, tmp1, tmp2); |
| cbnz(tmp1, DONE); |
| b(SAME); |
| |
| bind(SHORT); |
| Label TAIL03, TAIL01; |
| |
| tbz(cnt1, 2 - log_elem_size, TAIL03); // 0-7 bytes left. |
| { |
| ldrw(tmp1, Address(post(a1, 4))); |
| ldrw(tmp2, Address(post(a2, 4))); |
| eorw(tmp1, tmp1, tmp2); |
| cbnzw(tmp1, DONE); |
| } |
| bind(TAIL03); |
| tbz(cnt1, 1 - log_elem_size, TAIL01); // 0-3 bytes left. |
| { |
| ldrh(tmp1, Address(post(a1, 2))); |
| ldrh(tmp2, Address(post(a2, 2))); |
| eorw(tmp1, tmp1, tmp2); |
| cbnzw(tmp1, DONE); |
| } |
| bind(TAIL01); |
| if (elem_size == 1) { // Only needed when comparing byte arrays. |
| tbz(cnt1, 0, SAME); // 0-1 bytes left. |
| { |
| ldrb(tmp1, a1); |
| ldrb(tmp2, a2); |
| eorw(tmp1, tmp1, tmp2); |
| cbnzw(tmp1, DONE); |
| } |
| } |
| // Arrays are equal. |
| bind(SAME); |
| mov(result, true); |
| |
| // That's it. |
| bind(DONE); |
| BLOCK_COMMENT(is_string ? "} string_equals" : "} array_equals"); |
| } |
| |
| |
| // encode char[] to byte[] in ISO_8859_1 |
| void MacroAssembler::encode_iso_array(Register src, Register dst, |
| Register len, Register result, |
| FloatRegister Vtmp1, FloatRegister Vtmp2, |
| FloatRegister Vtmp3, FloatRegister Vtmp4) |
| { |
| Label DONE, NEXT_32, LOOP_8, NEXT_8, LOOP_1, NEXT_1; |
| Register tmp1 = rscratch1; |
| |
| mov(result, len); // Save initial len |
| |
| #ifndef BUILTIN_SIM |
| subs(len, len, 32); |
| br(LT, LOOP_8); |
| |
| // The following code uses the SIMD 'uqxtn' and 'uqxtn2' instructions |
| // to convert chars to bytes. These set the 'QC' bit in the FPSR if |
| // any char could not fit in a byte, so clear the FPSR so we can test it. |
| clear_fpsr(); |
| |
| BIND(NEXT_32); |
| ld1(Vtmp1, Vtmp2, Vtmp3, Vtmp4, T8H, src); |
| uqxtn(Vtmp1, T8B, Vtmp1, T8H); // uqxtn - write bottom half |
| uqxtn(Vtmp1, T16B, Vtmp2, T8H); // uqxtn2 - write top half |
| uqxtn(Vtmp2, T8B, Vtmp3, T8H); |
| uqxtn(Vtmp2, T16B, Vtmp4, T8H); // uqxtn2 |
| get_fpsr(tmp1); |
| cbnzw(tmp1, LOOP_8); |
| st1(Vtmp1, Vtmp2, T16B, post(dst, 32)); |
| subs(len, len, 32); |
| add(src, src, 64); |
| br(GE, NEXT_32); |
| |
| BIND(LOOP_8); |
| adds(len, len, 32-8); |
| br(LT, LOOP_1); |
| clear_fpsr(); // QC may be set from loop above, clear again |
| BIND(NEXT_8); |
| ld1(Vtmp1, T8H, src); |
| uqxtn(Vtmp1, T8B, Vtmp1, T8H); |
| get_fpsr(tmp1); |
| cbnzw(tmp1, LOOP_1); |
| st1(Vtmp1, T8B, post(dst, 8)); |
| subs(len, len, 8); |
| add(src, src, 16); |
| br(GE, NEXT_8); |
| |
| BIND(LOOP_1); |
| adds(len, len, 8); |
| br(LE, DONE); |
| #else |
| cbz(len, DONE); |
| #endif |
| BIND(NEXT_1); |
| ldrh(tmp1, Address(post(src, 2))); |
| tst(tmp1, 0xff00); |
| br(NE, DONE); |
| strb(tmp1, Address(post(dst, 1))); |
| subs(len, len, 1); |
| br(GT, NEXT_1); |
| |
| BIND(DONE); |
| sub(result, result, len); // Return index where we stopped |
| } |
| |
| // get_thread() can be called anywhere inside generated code so we |
| // need to save whatever non-callee save context might get clobbered |
| // by the call to JavaThread::aarch64_get_thread_helper() or, indeed, |
| // the call setup code. |
| // |
| // aarch64_get_thread_helper() clobbers only r0, r1, and flags. |
| // |
| void MacroAssembler::get_thread(Register dst) { |
| RegSet saved_regs = RegSet::range(r0, r1) + lr - dst; |
| push(saved_regs, sp); |
| |
| mov(lr, CAST_FROM_FN_PTR(address, JavaThread::aarch64_get_thread_helper)); |
| blrt(lr, 1, 0, 1); |
| if (dst != c_rarg0) { |
| mov(dst, c_rarg0); |
| } |
| |
| pop(saved_regs, sp); |
| } |