| # |
| # Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved. |
| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| # |
| # This code is free software; you can redistribute it and/or modify it |
| # under the terms of the GNU General Public License version 2 only, as |
| # published by the Free Software Foundation. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the LICENSE file that accompanied this code. |
| # |
| # This code is distributed in the hope that it will be useful, but WITHOUT |
| # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| # version 2 for more details (a copy is included in the LICENSE file that |
| # accompanied this code). |
| # |
| # You should have received a copy of the GNU General Public License version |
| # 2 along with this work; if not, write to the Free Software Foundation, |
| # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| # |
| # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| # or visit www.oracle.com if you need additional information or have any |
| # questions. |
| # |
| |
| ################################################################ |
| # |
| # Setup common utility functions. |
| # |
| ################################################################ |
| |
| ifndef _MAKEBASE_GMK |
| _MAKEBASE_GMK := 1 |
| |
| ifeq ($(wildcard $(SPEC)),) |
| $(error MakeBase.gmk needs SPEC set to a proper spec.gmk) |
| endif |
| |
| # By defining this pseudo target, make will automatically remove targets |
| # if their recipe fails so that a rebuild is automatically triggered on the |
| # next make invocation. |
| .DELETE_ON_ERROR: |
| |
| ################################################################################ |
| # Definitions for special characters |
| ################################################################################ |
| |
| # When calling macros, the spaces between arguments are |
| # often semantically important! Sometimes we need to subst |
| # spaces and commas, therefore we need the following macros. |
| X:= |
| SPACE:=$(X) $(X) |
| COMMA:=, |
| DOLLAR:=$$ |
| HASH:=\# |
| LEFT_PAREN:=( |
| RIGHT_PAREN:=) |
| SQUOTE:=' |
| #' |
| DQUOTE:=" |
| #" |
| define NEWLINE |
| |
| |
| endef |
| |
| # In GNU Make 4.0 and higher, there is a file function for writing to files. |
| ifeq (4.0, $(firstword $(sort 4.0 $(MAKE_VERSION)))) |
| HAS_FILE_FUNCTION := true |
| endif |
| |
| ############################## |
| # Functions |
| ############################## |
| |
| ### Debug functions |
| |
| # Prints the name and value of a variable |
| PrintVar = \ |
| $(info $(strip $1) >$($(strip $1))<) |
| |
| ### Functions for timers |
| |
| # Store the build times in this directory. |
| BUILDTIMESDIR=$(OUTPUT_ROOT)/make-support/build-times |
| |
| # Record starting time for build of a sub repository. |
| define RecordStartTime |
| $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_start_$(strip $1) && \ |
| $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_start_$(strip $1)_human_readable |
| endef |
| |
| # Record ending time and calculate the difference and store it in a |
| # easy to read format. Handles builds that cross midnight. Expects |
| # that a build will never take 24 hours or more. |
| define RecordEndTime |
| $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_end_$(strip $1) |
| $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_end_$(strip $1)_human_readable |
| $(ECHO) `$(CAT) $(BUILDTIMESDIR)/build_time_start_$(strip $1)` `$(CAT) $(BUILDTIMESDIR)/build_time_end_$(strip $1)` $1 | \ |
| $(NAWK) '{ F=$$7; T=$$14; if (F > T) { T+=3600*24 }; D=T-F; H=int(D/3600); \ |
| M=int((D-H*3600)/60); S=D-H*3600-M*60; printf("%02d:%02d:%02d %s\n",H,M,S,$$15); }' \ |
| > $(BUILDTIMESDIR)/build_time_diff_$(strip $1) |
| endef |
| |
| # Hook to be called when starting to execute a top-level target |
| define TargetEnter |
| $(PRINTF) "## Starting $(patsubst %-only,%,$@)\n" |
| $(call RecordStartTime,$(patsubst %-only,%,$@)) |
| endef |
| |
| # Hook to be called when finish executing a top-level target |
| define TargetExit |
| $(call RecordEndTime,$(patsubst %-only,%,$@)) |
| $(PRINTF) "## Finished $(patsubst %-only,%,$@) (build time %s)\n\n" \ |
| "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_$(patsubst %-only,%,$@) | $(CUT) -f 1 -d ' '`" |
| endef |
| |
| ################################################################################ |
| # This macro translates $ into \$ to protect the $ from expansion in the shell. |
| # To make this macro resilient against already escaped strings, first remove |
| # any present escapes before escaping so that no double escapes are added. |
| EscapeDollar = $(subst $$,\$$,$(subst \$$,$$,$(strip $1))) |
| |
| ################################################################################ |
| # This macro translates $ into $$ to protect the string from make itself. |
| DoubleDollar = $(subst $$,$$$$,$(strip $1)) |
| |
| ################################################################################ |
| # ListPathsSafely can be used to print command parameters to a file. This is |
| # typically done if the command line lenght risk being too long for the |
| # OS/shell. In later make versions, the file function can be used for this |
| # purpose. For earlier versions, a more complex implementation is provided. |
| # |
| # The function ListPathsSafely can be called either directly or, more commonly |
| # from a recipe line. If called from a recipe, it will be executed in the |
| # evaluation phase of that recipe, which means that it will write to the file |
| # before any other line in the recipe has been run. |
| ifeq ($(HAS_FILE_FUNCTION), true) |
| # Param 1 - Name of variable containing paths/arguments to output |
| # Param 2 - File to print to |
| # Param 3 - Set to true to append to file instead of overwriting |
| define ListPathsSafely |
| $$(call MakeDir, $$(dir $$(strip $2))) |
| $$(file $$(if $$(filter true, $$(strip $3)),>>,>) \ |
| $$(strip $2),$$(subst $$(SPACE),$$(NEWLINE),$$(strip $$($$(strip $1))))) |
| endef |
| |
| else # HAS_FILE_FUNCTION |
| |
| $(eval compress_paths = \ |
| $(strip $(shell $(CAT) $(SRC_ROOT)/make/common/support/ListPathsSafely-pre-compress.incl))) |
| compress_paths += \ |
| $(subst $(SRC_ROOT),X97, \ |
| $(subst $(OUTPUT_ROOT),X98, \ |
| $(subst X,X00, \ |
| $(subst $(SPACE),\n,$(strip $1))))) |
| $(eval compress_paths += \ |
| $(strip $(shell $(CAT) $(SRC_ROOT)/make/common/support/ListPathsSafely-post-compress.incl))) |
| |
| decompress_paths=$(SED) -f $(SRC_ROOT)/make/common/support/ListPathsSafely-uncompress.sed \ |
| -e 's|X99|\\n|g' \ |
| -e 's|X98|$(OUTPUT_ROOT)|g' -e 's|X97|$(SRC_ROOT)|g' \ |
| -e 's|X00|X|g' |
| |
| ListPathsSafely_IfPrintf = \ |
| $(if $(word $3,$($(strip $1))), \ |
| $(shell $(PRINTF) -- "$(strip $(call EscapeDollar, \ |
| $(call compress_paths, $(wordlist $3,$4,$($(strip $1))))))\n" \ |
| | $(decompress_paths) >> $2)) |
| |
| # Param 1 - Name of variable containing paths/arguments to output |
| # Param 2 - File to print to |
| # Param 3 - Set to true to append to file instead of overwriting |
| define ListPathsSafely |
| ifneq (,$$(word 10001,$$($1))) |
| $$(error Cannot list safely more than 10000 paths. $1 has $$(words $$($1)) paths!) |
| endif |
| $$(call MakeDir, $$(dir $2)) |
| ifneq ($$(strip $3), true) |
| $$(shell $(RM) $$(strip $2)) |
| endif |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,1,250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,251,500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,501,750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,751,1000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,1001,1250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,1251,1500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,1501,1750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,1751,2000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,2001,2250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,2251,2500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,2501,2750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,2751,3000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,3001,3250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,3251,3500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,3501,3750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,3751,4000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,4001,4250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,4251,4500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,4501,4750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,4751,5000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,5001,5250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,5251,5500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,5501,5750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,5751,6000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,6001,6250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,6251,6500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,6501,6750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,6751,7000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,7001,7250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,7251,7500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,7501,7750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,7751,8000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,8001,8250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,8251,8500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,8501,8750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,8751,9000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,9001,9250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,9251,9500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,9501,9750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,9751,10000) |
| endef |
| endif # HAS_FILE_FUNCTION |
| |
| ################################################################################ |
| # The source tips can come from the Mercurial repository, or in the files |
| # $(HGTIP_FILENAME) which contains the tip but is also positioned in the same |
| # directory as the original $(HGDIR) directory. |
| # These should not be := assignments, only used from the root Makefile. |
| HG_VERSION = $(shell $(HG) version 2> /dev/null) |
| HG_DIRECTORY=.hg |
| HGTIP_FILENAME=.hgtip |
| HG_SEARCH = ./REPO ./*/REPO ./*/*/REPO ./*/*/*/REPO |
| REPO_LIST = $(patsubst ./%,%,$(patsubst %/,%,$(sort $(dir \ |
| $(shell $(CD) $(SRC_ROOT) ; \ |
| $(LS) -d $(HG_SEARCH:%/REPO=%/$(HG_DIRECTORY)) \ |
| $(HG_SEARCH:%/REPO=%/$(HGTIP_FILENAME)) \ |
| 2> /dev/null))))) |
| |
| # Emit the repo:tip pairs to $@, but only if they changed since last time |
| define GetSourceTips |
| $(CD) $(SRC_ROOT) ; \ |
| for i in $(REPO_LIST) IGNORE ; do \ |
| if [ "$${i}" = "IGNORE" ] ; then \ |
| continue; \ |
| elif [ -d $${i}/$(HG_DIRECTORY) -a "$(HG_VERSION)" != "" ] ; then \ |
| $(PRINTF) " %s:%s" \ |
| "$${i}" `$(HG) tip --repository $${i} --template '{node|short}\n'` ; \ |
| elif [ -f $${i}/$(HGTIP_FILENAME) ] ; then \ |
| $(PRINTF) " %s:%s" \ |
| "$${i}" `$(CAT) $${i}/$(HGTIP_FILENAME)` ; \ |
| fi; \ |
| done > $@.tmp |
| $(PRINTF) "\n" >> $@.tmp |
| if [ ! -f $@ ] || [ "`$(CAT) $@`" != "`$(CAT) $@.tmp`" ]; then \ |
| $(MV) $@.tmp $@ ; \ |
| else \ |
| $(RM) $@.tmp ; \ |
| fi |
| endef |
| |
| # Create the HGTIP_FILENAME file. Called from closed/make/SourceBundles.gmk |
| define CreateHgTip |
| $(HG) tip --repository $1 --template '{node|short}\n' > $1/$(HGTIP_FILENAME); \ |
| $(ECHO) $1/$(HGTIP_FILENAME) |
| endef |
| |
| ################################################################################ |
| |
| define SetupLogging |
| ifeq ($$(LOG_LEVEL), trace) |
| # Shell redefinition trick inspired by http://www.cmcrossroads.com/ask-mr-make/6535-tracing-rule-execution-in-gnu-make |
| # For each target executed, will print |
| # Building <TARGET> (from <FIRST PREREQUISITE>) (<ALL NEWER PREREQUISITES> newer) |
| # but with a limit of 20 on <ALL NEWER PREREQUISITES>, to avoid cluttering logs too much |
| # (and causing a crash on Cygwin). |
| # Default shell seems to always be /bin/sh. Must override with bash to get this to work on Solaris. |
| # Only use time if it's GNU time which supports format and output file. |
| WRAPPER_SHELL := $$(BASH) $$(SRC_ROOT)/common/bin/shell-tracer.sh $$(if $$(findstring yes,$$(IS_GNU_TIME)),$$(TIME),-) $$(OUTPUT_ROOT)/build-trace-time.log $$(SHELL) |
| SHELL = $$(warning $$(if $$@,Building $$@,Running shell command) $$(if $$<, (from $$<))$$(if $$?, ($$(wordlist 1, 20, $$?) $$(if $$(wordlist 21, 22, $$?), ... [in total $$(words $$?) files]) newer)))$$(WRAPPER_SHELL) |
| endif |
| # The warn level can never be turned off |
| LogWarn = $$(info $$(strip $$1)) |
| LOG_WARN := |
| ifneq ($$(findstring $$(LOG_LEVEL), info debug trace),) |
| LogInfo = $$(info $$(strip $$1)) |
| LOG_INFO := |
| else |
| LogInfo = |
| LOG_INFO := > /dev/null |
| endif |
| ifneq ($$(findstring $$(LOG_LEVEL), debug trace),) |
| LogDebug = $$(info $$(strip $$1)) |
| LOG_DEBUG := |
| else |
| LogDebug = |
| LOG_DEBUG := > /dev/null |
| endif |
| ifneq ($$(findstring $$(LOG_LEVEL), trace),) |
| LogTrace = $$(info $$(strip $$1)) |
| LOG_TRACE := |
| else |
| LogTrace = |
| LOG_TRACE := > /dev/null |
| endif |
| endef |
| |
| # Make sure logging is setup for everyone that includes MakeBase.gmk. |
| $(eval $(call SetupLogging)) |
| |
| ################################################################################ |
| # Creates a sequence of increasing numbers (inclusive). |
| # Param 1 - starting number |
| # Param 2 - ending number |
| sequence = \ |
| $(wordlist $1, $2, $(strip \ |
| $(eval SEQUENCE_COUNT :=) \ |
| $(call _sequence-do,$(strip $2)))) |
| |
| _sequence-do = \ |
| $(if $(word $1, $(SEQUENCE_COUNT)),, \ |
| $(eval SEQUENCE_COUNT += .) \ |
| $(words $(SEQUENCE_COUNT)) \ |
| $(call _sequence-do,$1)) |
| |
| ################################################################################ |
| |
| MAX_PARAMS := 35 |
| PARAM_SEQUENCE := $(call sequence, 2, $(MAX_PARAMS)) |
| |
| # Template for creating a macro taking named parameters. To use it, assign the |
| # template to a variable with the name you want for your macro, using '=' |
| # assignment. Then define a macro body with the suffix "Body". The Body macro |
| # should take 1 parameter which should be a unique string for that invocation |
| # of the macro. |
| # Ex: |
| # SetupFoo = $(NamedParamsMacroTemplate) |
| # define SetupFooBody |
| # # do something |
| # # access parameters as $$($1_BAR) |
| # endef |
| # Call it like this |
| # $(eval $(call SetupFoo, BUILD_SOMETHING, \ |
| # BAR := some parameter value, \ |
| # )) |
| define NamedParamsMacroTemplate |
| $(if $($(MAX_PARAMS)),$(error Internal makefile error: \ |
| Too many named arguments to macro, please update MAX_PARAMS in MakeBase.gmk)) |
| # Iterate over 2 3 4... and evaluate the named parameters with $1_ as prefix |
| $(foreach i,$(PARAM_SEQUENCE), $(if $(strip $($i)),\ |
| $(strip $1)_$(strip $($i)))$(NEWLINE)) |
| # Debug print all named parameter names and values |
| $(if $(findstring $(LOG_LEVEL),debug trace), \ |
| $(info $0 $(strip $1) $(foreach i,$(PARAM_SEQUENCE), \ |
| $(if $(strip $($i)),$(NEWLINE) $(strip [$i] $(if $(filter $(LOG_LEVEL), trace), \ |
| $($i), $(wordlist 1, 20, $($(i))) $(if $(word 21, $($(i))), ...))))))) |
| |
| $(if $(DEBUG_$(strip $1)), |
| $(info -------- <<< Begin expansion of $(strip $1)) \ |
| $(info $(call $(0)Body,$(strip $1))) \ |
| $(info -------- >>> End expansion of $(strip $1)) \ |
| ) |
| |
| $(call $(0)Body,$(strip $1)) |
| endef |
| |
| ################################################################################ |
| # Make directory without forking mkdir if not needed |
| # 1: List of directories to create |
| MakeDir = \ |
| $(strip \ |
| $(eval MakeDir_dirs_to_make := $(strip $(foreach d, $1, $(if $(wildcard $d), , $d)))) \ |
| $(if $(MakeDir_dirs_to_make), $(shell $(MKDIR) -p $(MakeDir_dirs_to_make))) \ |
| ) |
| |
| ################################################################################ |
| # Assign a variable only if it is empty |
| # Param 1 - Variable to assign |
| # Param 2 - Value to assign |
| SetIfEmpty = \ |
| $(if $($(strip $1)),,$(eval $(strip $1) := $2)) |
| |
| ################################################################################ |
| |
| ifeq ($(OPENJDK_TARGET_OS),solaris) |
| # On Solaris, if the target is a symlink and exists, cp won't overwrite. |
| # Cp has to operate in recursive mode to allow for -P flag, to preserve soft links. If the |
| # name of the target file differs from the source file, rename after copy. |
| # If the source and target parent directories are the same, recursive copy doesn't work |
| # so we fall back on regular copy, which isn't preserving symlinks. |
| define install-file |
| $(MKDIR) -p '$(@D)' |
| $(RM) '$@' |
| if [ "$(@D)" != "$(<D)" ]; then \ |
| $(CP) -f -r -P '$<' '$(@D)'; \ |
| if [ "$(@F)" != "$(<F)" ]; then \ |
| $(MV) '$(@D)/$(<F)' '$@'; \ |
| fi; \ |
| else \ |
| if [ -L '$<' ]; then \ |
| $(ECHO) "Source file is a symlink and target is in the same directory: $< $@" ; \ |
| exit 1; \ |
| fi; \ |
| $(CP) -f '$<' '$@'; \ |
| fi |
| endef |
| else ifeq ($(OPENJDK_TARGET_OS),macosx) |
| # On mac, extended attributes sometimes creep into the source files, which may later |
| # cause the creation of ._* files which confuses testing. Clear these with xattr if |
| # set. Some files get their write permissions removed after being copied to the |
| # output dir. When these are copied again to images, xattr would fail. By only clearing |
| # attributes when they are present, failing on this is avoided. |
| define install-file |
| $(MKDIR) -p '$(@D)' |
| $(CP) -fRP '$<' '$@' |
| if [ -n "`$(XATTR) -l '$@'`" ]; then $(XATTR) -c '$@'; fi |
| endef |
| else |
| # Running mkdir and cp in the same shell speeds up copy intensive tasks in Cygwin |
| # significantly. |
| define install-file |
| $(call MakeDir, $(@D)) |
| $(CP) -fP '$<' '$@' |
| endef |
| endif |
| |
| ################################################################################ |
| # Filter out duplicate sub strings while preserving order. Keeps the first occurance. |
| uniq = \ |
| $(if $1,$(firstword $1) $(call uniq,$(filter-out $(firstword $1),$1))) |
| |
| # Returns all whitespace-separated words in $2 where at least one of the |
| # whitespace-separated words in $1 is a substring. |
| containing = \ |
| $(strip \ |
| $(foreach v,$(strip $2),\ |
| $(call uniq,$(foreach p,$(strip $1),$(if $(findstring $p,$v),$v))))) |
| |
| # Returns all whitespace-separated words in $2 where none of the |
| # whitespace-separated words in $1 is a substring. |
| not-containing = \ |
| $(strip $(filter-out $(call containing,$1,$2),$2)) |
| |
| # Return a list of all string elements that are duplicated in $1. |
| dups = \ |
| $(strip $(foreach v, $(sort $1), $(if $(filter-out 1, \ |
| $(words $(filter $v, $1))), $v))) |
| |
| # String equals |
| equals = \ |
| $(and $(findstring $(strip $1),$(strip $2)),\ |
| $(findstring $(strip $2),$(strip $1))) |
| |
| # Remove a whole list of prefixes |
| # $1 - List of prefixes |
| # $2 - List of elements to process |
| remove-prefixes = \ |
| $(strip $(if $1,$(patsubst $(firstword $1)%,%,\ |
| $(call remove-prefixes,$(filter-out $(firstword $1),$1),$2)),$2)) |
| |
| # Convert the string given to upper case, without any $(shell) |
| # Inspired by http://lists.gnu.org/archive/html/help-make/2013-09/msg00009.html |
| uppercase_table := a,A b,B c,C d,D e,E f,F g,G h,H i,I j,J k,K l,L m,M n,N o,O \ |
| p,P q,Q r,R s,S t,T u,U v,V w,W x,X y,Y z,Z |
| |
| uppercase_internal = \ |
| $(if $(strip $1), $$(subst $(firstword $1), $(call uppercase_internal, \ |
| $(wordlist 2, $(words $1), $1), $2)), $2) |
| |
| # Convert a string to upper case. Works only on a-z. |
| # $1 - The string to convert |
| uppercase = \ |
| $(strip \ |
| $(eval uppercase_result := $(call uppercase_internal, $(uppercase_table), $1)) \ |
| $(uppercase_result) \ |
| ) |
| |
| ################################################################################ |
| |
| ifneq ($(DISABLE_CACHE_FIND), true) |
| # In Cygwin, finds are very costly, both because of expensive forks and because |
| # of bad file system caching. Find is used extensively in $(shell) commands to |
| # find source files. This makes rerunning make with no or few changes rather |
| # expensive. To speed this up, these two macros are used to cache the results |
| # of simple find commands for reuse. |
| # |
| # Runs a find and stores both the directories where it was run and the results. |
| # This macro can be called multiple times to add to the cache. Only finds files |
| # with no filters. |
| # |
| # Needs to be called with $(eval ) |
| # |
| # Even if the performance benifit is negligible on other platforms, keep the |
| # functionality active unless explicitly disabled to exercise it more. |
| # |
| # Initialize FIND_CACHE_DIRS with := to make it a non recursively-expanded variable |
| FIND_CACHE_DIRS := |
| # Param 1 - Dirs to find in |
| # Param 2 - (optional) specialization. Normally "-a \( ... \)" expression. |
| define FillCacheFind |
| # Filter out already cached dirs. The - is needed when FIND_CACHE_DIRS is empty |
| # since filter out will then return empty. |
| FIND_CACHE_NEW_DIRS := $$(filter-out $$(addsuffix /%,\ |
| - $(FIND_CACHE_DIRS)) $(FIND_CACHE_DIRS), $1) |
| ifneq ($$(FIND_CACHE_NEW_DIRS), ) |
| # Remove any trailing slash from dirs in the cache dir list |
| FIND_CACHE_DIRS += $$(patsubst %/,%, $$(FIND_CACHE_NEW_DIRS)) |
| FIND_CACHE := $$(sort $$(FIND_CACHE) $$(shell $(FIND) $$(FIND_CACHE_NEW_DIRS) \( -type f -o -type l \) $2)) |
| endif |
| endef |
| |
| # Mimics find by looking in the cache if all of the directories have been cached. |
| # Otherwise reverts to shell find. This is safe to call on all platforms, even if |
| # cache is deactivated. |
| # |
| # $1 can be either a directory or a file. If it's a directory, make |
| # sure we have exactly one trailing slash before the wildcard. |
| # The extra - is needed when FIND_CACHE_DIRS is empty but should be harmless. |
| # |
| # Param 1 - Dirs to find in |
| # Param 2 - (optional) specialization. Normally "-a \( ... \)" expression. |
| define CacheFind |
| $(if $(filter-out $(addsuffix /%,- $(FIND_CACHE_DIRS)) $(FIND_CACHE_DIRS),$1), \ |
| $(shell $(FIND) $1 \( -type f -o -type l \) $2), \ |
| $(filter $(addsuffix /%,$(patsubst %/,%,$1)) $1,$(FIND_CACHE))) |
| endef |
| |
| else |
| # If CacheFind is disabled, just run the find command. |
| # Param 1 - Dirs to find in |
| # Param 2 - (optional) specialization. Normally "-a \( ... \)" expression. |
| define CacheFind |
| $(shell $(FIND) $1 \( -type f -o -type l \) $2) |
| endef |
| endif |
| |
| ################################################################################ |
| |
| define AddFileToCopy |
| # Helper macro for SetupCopyFiles |
| # 1 : Source file |
| # 2 : Dest file |
| # 3 : Variable to add targets to |
| # 4 : Macro to call for copy operation |
| $2: $1 |
| $$(call LogInfo, Copying $$(patsubst $(OUTPUT_ROOT)/%,%,$$@)) |
| $$($$(strip $4)) |
| |
| $3 += $2 |
| endef |
| |
| # Returns the value of the first argument |
| identity = \ |
| $(strip $1) |
| |
| # Setup make rules for copying files, with an option to do more complex |
| # processing instead of copying. |
| # |
| # Parameter 1 is the name of the rule. This name is used as variable prefix, |
| # and the targets generated are listed in a variable by that name. |
| # |
| # Remaining parameters are named arguments. These include: |
| # SRC : Source root dir (defaults to dir of first file) |
| # DEST : Dest root dir |
| # FILES : List of files to copy with absolute paths, or path relative to SRC. |
| # Must be in SRC. |
| # FLATTEN : Set to flatten the directory structure in the DEST dir. |
| # MACRO : Optionally override the default macro used for making the copy. |
| # Default is 'install-file' |
| # NAME_MACRO : Optionally supply a macro that rewrites the target file name |
| # based on the source file name |
| SetupCopyFiles = $(NamedParamsMacroTemplate) |
| define SetupCopyFilesBody |
| |
| ifeq ($$($1_MACRO), ) |
| $1_MACRO := install-file |
| endif |
| |
| # Default SRC to the dir of the first file. |
| ifeq ($$($1_SRC), ) |
| $1_SRC := $$(dir $$(firstword $$($1_FILES))) |
| endif |
| |
| ifeq ($$($1_NAME_MACRO), ) |
| $1_NAME_MACRO := identity |
| endif |
| |
| # Remove any trailing slash from SRC and DEST |
| $1_SRC := $$(patsubst %/,%,$$($1_SRC)) |
| $1_DEST := $$(patsubst %/,%,$$($1_DEST)) |
| |
| $$(foreach f, $$(patsubst $$($1_SRC)/%,%,$$($1_FILES)), \ |
| $$(eval $$(call AddFileToCopy, $$($1_SRC)/$$f, \ |
| $$($1_DEST)/$$(call $$(strip $$($1_NAME_MACRO)),$$(if $$($1_FLATTEN),$$(notdir $$f),$$f)), \ |
| $1, $$($1_MACRO)))) |
| |
| endef |
| |
| ################################################################################ |
| # ShellQuote |
| # |
| # Quotes a string with single quotes and replaces single quotes with '\'' so |
| # that the contents survives being given to the shell. |
| |
| ShellQuote = \ |
| $(SQUOTE)$(subst $(SQUOTE),$(SQUOTE)\$(SQUOTE)$(SQUOTE),$(strip $1))$(SQUOTE) |
| |
| ################################################################################ |
| # Write to and read from file |
| |
| # Param 1 - File to read |
| ReadFile = \ |
| $(shell $(CAT) $1) |
| |
| # Param 1 - Text to write |
| # Param 2 - File to write to |
| ifeq ($(HAS_FILE_FUNCTION), true) |
| WriteFile = \ |
| $(file >$2,$(strip $1)) |
| else |
| # Use printf to get consistent behavior on all platforms. |
| WriteFile = \ |
| $(shell $(PRINTF) "%s" $(call ShellQuote, $1) > $2) |
| endif |
| |
| ################################################################################ |
| # DependOnVariable |
| # |
| # This macro takes a variable name and puts the value in a file only if the |
| # value has changed since last. The name of the file is returned. This can be |
| # used to create rule dependencies on make variable values. The following |
| # example would get rebuilt if the value of SOME_VAR was changed: |
| # |
| # path/to/some-file: $(call DependOnVariable, SOME_VAR) |
| # echo $(SOME_VAR) > $@ |
| # |
| # Note that leading and trailing white space in the value is ignored. |
| # |
| |
| # Defines the sub directory structure to store variable value file in |
| DependOnVariableDirName = \ |
| $(strip $(addsuffix $(if $(MODULE),/$(MODULE)), \ |
| $(subst $(SRC_ROOT)/,, $(if $(filter /%, $(firstword $(MAKEFILE_LIST))), \ |
| $(firstword $(MAKEFILE_LIST)), \ |
| $(CURDIR)/$(firstword $(MAKEFILE_LIST)))))) |
| |
| # Defines the name of the file to store variable value in. Generates a name |
| # unless parameter 2 is given. |
| # Param 1 - Name of variable |
| # Param 2 - (optional) name of file to store value in |
| DependOnVariableFileName = \ |
| $(strip $(if $(strip $2), $2, \ |
| $(MAKESUPPORT_OUTPUTDIR)/vardeps/$(DependOnVariableDirName)/$(strip $1).vardeps)) |
| |
| # Does the actual work with parameters stripped. |
| # If the file exists AND the contents is the same as the variable, do nothing |
| # else print a new file. |
| # Always returns the name of the file where the value was printed. |
| # Param 1 - Name of variable |
| # Param 2 - (optional) name of file to store value in |
| DependOnVariableHelper = \ |
| $(strip \ |
| $(eval -include $(call DependOnVariableFileName, $1, $2)) \ |
| $(if $(call equals, $(strip $($1)), $(strip $($1_old))),,\ |
| $(call MakeDir, $(dir $(call DependOnVariableFileName, $1, $2))) \ |
| $(if $(findstring $(LOG_LEVEL), trace), \ |
| $(info NewVariable $1: >$(strip $($1))<) \ |
| $(info OldVariable $1: >$(strip $($1_old))<)) \ |
| $(call WriteFile, $1_old:=$(call DoubleDollar,$($1)), \ |
| $(call DependOnVariableFileName, $1, $2))) \ |
| $(call DependOnVariableFileName, $1, $2) \ |
| ) |
| |
| # Main macro |
| # Param 1 - Name of variable |
| # Param 2 - (optional) name of file to store value in |
| DependOnVariable = \ |
| $(call DependOnVariableHelper,$(strip $1),$(strip $2)) |
| |
| # LogCmdlines is only intended to be used by ExecuteWithLog |
| ifeq ($(LOG_CMDLINES), true) |
| LogCmdlines = $(info $(strip $1)) |
| else |
| LogCmdlines = |
| endif |
| |
| ################################################################################ |
| # ExecuteWithLog will run a command and log the output appropriately. This is |
| # meant to be used by commands that do "real" work, like a compilation. |
| # The output is stored in a specified log file, which is displayed at the end |
| # of the build in case of failure. The command line itself is stored in a file, |
| # and also logged to stdout if the LOG=cmdlines option has been given. |
| # |
| # Param 1 - The path to base the name of the log file / command line file on |
| # Param 2 - The command to run |
| ExecuteWithLog = \ |
| $(call LogCmdlines, Exececuting: [$(strip $2)]) \ |
| $(call WriteFile, $2, $(strip $1).cmdline) \ |
| ( $(strip $2) > >($(TEE) $(strip $1).log) 2> >($(TEE) $(strip $1).log >&2) || \ |
| ( exitcode=$(DOLLAR)? && \ |
| $(CP) $(strip $1).log $(MAKESUPPORT_OUTPUTDIR)/failure-logs/$(subst /,_,$(patsubst $(BUILD_OUTPUT)/%,%,$(strip $1))).log && \ |
| exit $(DOLLAR)exitcode ) ) |
| |
| ################################################################################ |
| # Find lib dir for module |
| # Param 1 - module name |
| ifeq ($(OPENJDK_TARGET_OS_TYPE), unix) |
| FindLibDirForModule = \ |
| $(SUPPORT_OUTPUTDIR)/modules_libs/$(strip $1)$(OPENJDK_TARGET_CPU_LIBDIR) |
| else |
| FindLibDirForModule = \ |
| $(SUPPORT_OUTPUTDIR)/modules_libs/$(strip $1) |
| endif |
| |
| ################################################################################ |
| # Return a string suitable for use after a -classpath option. It will correct and safe to use |
| # on all platforms. Arguments are given as space separate classpath entries. |
| # param 1 : A space separated list of classpath entries |
| # The surrounding strip is needed to keep additional whitespace out |
| PathList = \ |
| "$(subst $(SPACE),$(PATH_SEP),$(strip $1))" |
| |
| ################################################################################ |
| |
| # Hook to include the corresponding custom file, if present. |
| $(eval $(call IncludeCustomExtension, , common/MakeBase.gmk)) |
| |
| endif # _MAKEBASE_GMK |