| # |
| # Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved. |
| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| # |
| # This code is free software; you can redistribute it and/or modify it |
| # under the terms of the GNU General Public License version 2 only, as |
| # published by the Free Software Foundation. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the LICENSE file that accompanied this code. |
| # |
| # This code is distributed in the hope that it will be useful, but WITHOUT |
| # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| # version 2 for more details (a copy is included in the LICENSE file that |
| # accompanied this code). |
| # |
| # You should have received a copy of the GNU General Public License version |
| # 2 along with this work; if not, write to the Free Software Foundation, |
| # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| # |
| # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| # or visit www.oracle.com if you need additional information or have any |
| # questions. |
| # |
| |
| ############################################################################### |
| # Check which variant of the JDK that we want to build. |
| # Currently we have: |
| # normal: standard edition |
| # but the custom make system may add other variants |
| # |
| # Effectively the JDK variant gives a name to a specific set of |
| # modules to compile into the JDK. |
| AC_DEFUN_ONCE([JDKOPT_SETUP_JDK_VARIANT], |
| [ |
| AC_MSG_CHECKING([which variant of the JDK to build]) |
| AC_ARG_WITH([jdk-variant], [AS_HELP_STRING([--with-jdk-variant], |
| [JDK variant to build (normal) @<:@normal@:>@])]) |
| |
| if test "x$with_jdk_variant" = xnormal || test "x$with_jdk_variant" = x; then |
| JDK_VARIANT="normal" |
| else |
| AC_MSG_ERROR([The available JDK variants are: normal]) |
| fi |
| |
| AC_SUBST(JDK_VARIANT) |
| |
| AC_MSG_RESULT([$JDK_VARIANT]) |
| ]) |
| |
| ############################################################################### |
| # Set the debug level |
| # release: no debug information, all optimizations, no asserts. |
| # optimized: no debug information, all optimizations, no asserts, HotSpot target is 'optimized'. |
| # fastdebug: debug information (-g), all optimizations, all asserts |
| # slowdebug: debug information (-g), no optimizations, all asserts |
| AC_DEFUN_ONCE([JDKOPT_SETUP_DEBUG_LEVEL], |
| [ |
| DEBUG_LEVEL="release" |
| AC_MSG_CHECKING([which debug level to use]) |
| AC_ARG_ENABLE([debug], [AS_HELP_STRING([--enable-debug], |
| [set the debug level to fastdebug (shorthand for --with-debug-level=fastdebug) @<:@disabled@:>@])], |
| [ |
| ENABLE_DEBUG="${enableval}" |
| DEBUG_LEVEL="fastdebug" |
| ], [ENABLE_DEBUG="no"]) |
| |
| AC_ARG_WITH([debug-level], [AS_HELP_STRING([--with-debug-level], |
| [set the debug level (release, fastdebug, slowdebug, optimized) @<:@release@:>@])], |
| [ |
| DEBUG_LEVEL="${withval}" |
| if test "x$ENABLE_DEBUG" = xyes; then |
| AC_MSG_ERROR([You cannot use both --enable-debug and --with-debug-level at the same time.]) |
| fi |
| ]) |
| AC_MSG_RESULT([$DEBUG_LEVEL]) |
| |
| if test "x$DEBUG_LEVEL" != xrelease && \ |
| test "x$DEBUG_LEVEL" != xoptimized && \ |
| test "x$DEBUG_LEVEL" != xfastdebug && \ |
| test "x$DEBUG_LEVEL" != xslowdebug; then |
| AC_MSG_ERROR([Allowed debug levels are: release, fastdebug, slowdebug and optimized]) |
| fi |
| |
| # Translate DEBUG_LEVEL to debug level used by Hotspot |
| HOTSPOT_DEBUG_LEVEL="$DEBUG_LEVEL" |
| if test "x$DEBUG_LEVEL" = xrelease; then |
| HOTSPOT_DEBUG_LEVEL="product" |
| elif test "x$DEBUG_LEVEL" = xslowdebug; then |
| HOTSPOT_DEBUG_LEVEL="debug" |
| fi |
| |
| if test "x$DEBUG_LEVEL" = xoptimized; then |
| # The debug level 'optimized' is a little special because it is currently only |
| # applicable to the HotSpot build where it means to build a completely |
| # optimized version of the VM without any debugging code (like for the |
| # 'release' debug level which is called 'product' in the HotSpot build) but |
| # with the exception that it can contain additional code which is otherwise |
| # protected by '#ifndef PRODUCT' macros. These 'optimized' builds are used to |
| # test new and/or experimental features which are not intended for customer |
| # shipment. Because these new features need to be tested and benchmarked in |
| # real world scenarios, we want to build the containing JDK at the 'release' |
| # debug level. |
| DEBUG_LEVEL="release" |
| fi |
| |
| AC_SUBST(HOTSPOT_DEBUG_LEVEL) |
| AC_SUBST(DEBUG_LEVEL) |
| ]) |
| |
| ############################################################################### |
| # |
| # Should we build only OpenJDK even if closed sources are present? |
| # |
| AC_DEFUN_ONCE([JDKOPT_SETUP_OPEN_OR_CUSTOM], |
| [ |
| AC_ARG_ENABLE([openjdk-only], [AS_HELP_STRING([--enable-openjdk-only], |
| [suppress building custom source even if present @<:@disabled@:>@])],,[enable_openjdk_only="no"]) |
| |
| AC_MSG_CHECKING([if custom source is suppressed (openjdk-only)]) |
| AC_MSG_RESULT([$enable_openjdk_only]) |
| if test "x$enable_openjdk_only" = "xyes"; then |
| SUPPRESS_CUSTOM_EXTENSIONS="true" |
| elif test "x$enable_openjdk_only" = "xno"; then |
| SUPPRESS_CUSTOM_EXTENSIONS="false" |
| else |
| AC_MSG_ERROR([Invalid value for --enable-openjdk-only: $enable_openjdk_only]) |
| fi |
| |
| # custom-make-dir is deprecated. Please use your custom-hook.m4 to override |
| # the IncludeCustomExtension macro. |
| BASIC_DEPRECATED_ARG_WITH(custom-make-dir) |
| ]) |
| |
| AC_DEFUN_ONCE([JDKOPT_SETUP_JDK_OPTIONS], |
| [ |
| # Should we build a JDK without a graphical UI? |
| AC_MSG_CHECKING([headless only]) |
| AC_ARG_ENABLE([headless-only], [AS_HELP_STRING([--enable-headless-only], |
| [only build headless (no GUI) support @<:@disabled@:>@])]) |
| |
| if test "x$enable_headless_only" = "xyes"; then |
| ENABLE_HEADLESS_ONLY="true" |
| AC_MSG_RESULT([yes]) |
| elif test "x$enable_headless_only" = "xno"; then |
| ENABLE_HEADLESS_ONLY="false" |
| AC_MSG_RESULT([no]) |
| elif test "x$enable_headless_only" = "x"; then |
| ENABLE_HEADLESS_ONLY="false" |
| AC_MSG_RESULT([no]) |
| else |
| AC_MSG_ERROR([--enable-headless-only can only take yes or no]) |
| fi |
| |
| AC_SUBST(ENABLE_HEADLESS_ONLY) |
| |
| # Should we build the complete docs, or just a lightweight version? |
| AC_ARG_ENABLE([full-docs], [AS_HELP_STRING([--enable-full-docs], |
| [build complete documentation @<:@enabled if all tools found@:>@])]) |
| |
| # Verify dependencies |
| AC_MSG_CHECKING([for graphviz dot]) |
| if test "x$DOT" != "x"; then |
| AC_MSG_RESULT([yes]) |
| else |
| AC_MSG_RESULT([no, cannot generate full docs]) |
| FULL_DOCS_DEP_MISSING=true |
| fi |
| |
| AC_MSG_CHECKING([for pandoc]) |
| if test "x$PANDOC" != "x"; then |
| AC_MSG_RESULT([yes]) |
| else |
| AC_MSG_RESULT([no, cannot generate full docs]) |
| FULL_DOCS_DEP_MISSING=true |
| fi |
| |
| AC_MSG_CHECKING([full docs]) |
| if test "x$enable_full_docs" = xyes; then |
| if test "x$FULL_DOCS_DEP_MISSING" = "xtrue"; then |
| AC_MSG_RESULT([no, missing dependencies]) |
| HELP_MSG_MISSING_DEPENDENCY([dot]) |
| AC_MSG_ERROR([Cannot enable full docs with missing dependencies. See above. $HELP_MSG]) |
| else |
| ENABLE_FULL_DOCS=true |
| AC_MSG_RESULT([yes, forced]) |
| fi |
| elif test "x$enable_full_docs" = xno; then |
| ENABLE_FULL_DOCS=false |
| AC_MSG_RESULT([no, forced]) |
| elif test "x$enable_full_docs" = x; then |
| # Check for prerequisites |
| if test "x$FULL_DOCS_DEP_MISSING" = xtrue; then |
| ENABLE_FULL_DOCS=false |
| AC_MSG_RESULT([no, missing dependencies]) |
| else |
| ENABLE_FULL_DOCS=true |
| AC_MSG_RESULT([yes, dependencies present]) |
| fi |
| else |
| AC_MSG_ERROR([--enable-full-docs can only take yes or no]) |
| fi |
| |
| AC_SUBST(ENABLE_FULL_DOCS) |
| |
| # Choose cacerts source file |
| AC_ARG_WITH(cacerts-file, [AS_HELP_STRING([--with-cacerts-file], |
| [specify alternative cacerts file])]) |
| if test "x$with_cacerts_file" != x; then |
| CACERTS_FILE=$with_cacerts_file |
| fi |
| AC_SUBST(CACERTS_FILE) |
| |
| # Enable or disable unlimited crypto |
| AC_ARG_ENABLE(unlimited-crypto, [AS_HELP_STRING([--disable-unlimited-crypto], |
| [Disable unlimited crypto policy @<:@enabled@:>@])],, |
| [enable_unlimited_crypto=yes]) |
| if test "x$enable_unlimited_crypto" = "xyes"; then |
| UNLIMITED_CRYPTO=true |
| else |
| UNLIMITED_CRYPTO=false |
| fi |
| AC_SUBST(UNLIMITED_CRYPTO) |
| |
| # Should we build the serviceability agent (SA)? |
| INCLUDE_SA=true |
| if HOTSPOT_CHECK_JVM_VARIANT(zero) || HOTSPOT_CHECK_JVM_VARIANT(zeroshark); then |
| INCLUDE_SA=false |
| fi |
| if test "x$OPENJDK_TARGET_OS" = xaix ; then |
| INCLUDE_SA=false |
| fi |
| AC_SUBST(INCLUDE_SA) |
| |
| # Compress jars |
| COMPRESS_JARS=false |
| |
| AC_SUBST(COMPRESS_JARS) |
| |
| # Setup default copyright year. Mostly overridden when building close to a new year. |
| AC_ARG_WITH(copyright-year, [AS_HELP_STRING([--with-copyright-year], |
| [Set copyright year value for build @<:@current year@:>@])]) |
| if test "x$with_copyright_year" = xyes; then |
| AC_MSG_ERROR([Copyright year must have a value]) |
| elif test "x$with_copyright_year" != x; then |
| COPYRIGHT_YEAR="$with_copyright_year" |
| else |
| COPYRIGHT_YEAR=`$DATE +'%Y'` |
| fi |
| AC_SUBST(COPYRIGHT_YEAR) |
| ]) |
| |
| ############################################################################### |
| # |
| # Enable or disable the elliptic curve crypto implementation |
| # |
| AC_DEFUN_ONCE([JDKOPT_DETECT_INTREE_EC], |
| [ |
| AC_MSG_CHECKING([if elliptic curve crypto implementation is present]) |
| |
| if test -d "${SRC_ROOT}/jdk/src/jdk.crypto.ec/share/native/libsunec/impl"; then |
| ENABLE_INTREE_EC=true |
| AC_MSG_RESULT([yes]) |
| else |
| ENABLE_INTREE_EC=false |
| AC_MSG_RESULT([no]) |
| fi |
| |
| AC_SUBST(ENABLE_INTREE_EC) |
| ]) |
| |
| AC_DEFUN_ONCE([JDKOPT_SETUP_DEBUG_SYMBOLS], |
| [ |
| # |
| # NATIVE_DEBUG_SYMBOLS |
| # This must be done after the toolchain is setup, since we're looking at objcopy. |
| # |
| AC_MSG_CHECKING([what type of native debug symbols to use]) |
| AC_ARG_WITH([native-debug-symbols], |
| [AS_HELP_STRING([--with-native-debug-symbols], |
| [set the native debug symbol configuration (none, internal, external, zipped) @<:@varying@:>@])], |
| [ |
| if test "x$OPENJDK_TARGET_OS" = xaix; then |
| if test "x$withval" = xexternal || test "x$withval" = xzipped; then |
| AC_MSG_ERROR([AIX only supports the parameters 'none' and 'internal' for --with-native-debug-symbols]) |
| fi |
| fi |
| ], |
| [ |
| if test "x$OPENJDK_TARGET_OS" = xaix; then |
| # AIX doesn't support 'zipped' so use 'internal' as default |
| with_native_debug_symbols="internal" |
| else |
| if test "x$STATIC_BUILD" = xtrue; then |
| with_native_debug_symbols="none" |
| else |
| with_native_debug_symbols="zipped" |
| fi |
| fi |
| ]) |
| NATIVE_DEBUG_SYMBOLS=$with_native_debug_symbols |
| AC_MSG_RESULT([$NATIVE_DEBUG_SYMBOLS]) |
| |
| if test "x$NATIVE_DEBUG_SYMBOLS" = xzipped; then |
| |
| if test "x$OPENJDK_TARGET_OS" = xsolaris || test "x$OPENJDK_TARGET_OS" = xlinux; then |
| if test "x$OBJCOPY" = x; then |
| # enabling of enable-debug-symbols and can't find objcopy |
| # this is an error |
| AC_MSG_ERROR([Unable to find objcopy, cannot enable native debug symbols]) |
| fi |
| fi |
| |
| COMPILE_WITH_DEBUG_SYMBOLS=true |
| COPY_DEBUG_SYMBOLS=true |
| ZIP_EXTERNAL_DEBUG_SYMBOLS=true |
| elif test "x$NATIVE_DEBUG_SYMBOLS" = xnone; then |
| COMPILE_WITH_DEBUG_SYMBOLS=false |
| COPY_DEBUG_SYMBOLS=false |
| ZIP_EXTERNAL_DEBUG_SYMBOLS=false |
| elif test "x$NATIVE_DEBUG_SYMBOLS" = xinternal; then |
| COMPILE_WITH_DEBUG_SYMBOLS=true |
| COPY_DEBUG_SYMBOLS=false |
| ZIP_EXTERNAL_DEBUG_SYMBOLS=false |
| elif test "x$NATIVE_DEBUG_SYMBOLS" = xexternal; then |
| |
| if test "x$OPENJDK_TARGET_OS" = xsolaris || test "x$OPENJDK_TARGET_OS" = xlinux; then |
| if test "x$OBJCOPY" = x; then |
| # enabling of enable-debug-symbols and can't find objcopy |
| # this is an error |
| AC_MSG_ERROR([Unable to find objcopy, cannot enable native debug symbols]) |
| fi |
| fi |
| |
| COMPILE_WITH_DEBUG_SYMBOLS=true |
| COPY_DEBUG_SYMBOLS=true |
| ZIP_EXTERNAL_DEBUG_SYMBOLS=false |
| else |
| AC_MSG_ERROR([Allowed native debug symbols are: none, internal, external, zipped]) |
| fi |
| |
| # --enable-debug-symbols is deprecated. |
| # Please use --with-native-debug-symbols=[internal,external,zipped] . |
| BASIC_DEPRECATED_ARG_ENABLE(debug-symbols, debug_symbols, |
| [Please use --with-native-debug-symbols=[[internal,external,zipped]] .]) |
| |
| # --enable-zip-debug-info is deprecated. |
| # Please use --with-native-debug-symbols=zipped . |
| BASIC_DEPRECATED_ARG_ENABLE(zip-debug-info, zip_debug_info, |
| [Please use --with-native-debug-symbols=zipped .]) |
| |
| AC_SUBST(COMPILE_WITH_DEBUG_SYMBOLS) |
| AC_SUBST(COPY_DEBUG_SYMBOLS) |
| AC_SUBST(ZIP_EXTERNAL_DEBUG_SYMBOLS) |
| ]) |
| |
| ################################################################################ |
| # |
| # Gcov coverage data for hotspot |
| # |
| AC_DEFUN_ONCE([JDKOPT_SETUP_CODE_COVERAGE], |
| [ |
| AC_ARG_ENABLE(native-coverage, [AS_HELP_STRING([--enable-native-coverage], |
| [enable native compilation with code coverage data@<:@disabled@:>@])]) |
| GCOV_ENABLED="false" |
| if test "x$enable_native_coverage" = "xyes"; then |
| if test "x$TOOLCHAIN_TYPE" = "xgcc"; then |
| AC_MSG_CHECKING([if native coverage is enabled]) |
| AC_MSG_RESULT([yes]) |
| GCOV_CFLAGS="-fprofile-arcs -ftest-coverage -fno-inline" |
| GCOV_LDFLAGS="-fprofile-arcs" |
| JVM_CFLAGS="$JVM_CFLAGS $GCOV_CFLAGS" |
| JVM_LDFLAGS="$JVM_LDFLAGS $GCOV_LDFLAGS" |
| CFLAGS_JDKLIB="$CFLAGS_JDKLIB $GCOV_CFLAGS" |
| CFLAGS_JDKEXE="$CFLAGS_JDKEXE $GCOV_CFLAGS" |
| CXXFLAGS_JDKLIB="$CXXFLAGS_JDKLIB $GCOV_CFLAGS" |
| CXXFLAGS_JDKEXE="$CXXFLAGS_JDKEXE $GCOV_CFLAGS" |
| LDFLAGS_JDKLIB="$LDFLAGS_JDKLIB $GCOV_LDFLAGS" |
| LDFLAGS_JDKEXE="$LDFLAGS_JDKEXE $GCOV_LDFLAGS" |
| GCOV_ENABLED="true" |
| else |
| AC_MSG_ERROR([--enable-native-coverage only works with toolchain type gcc]) |
| fi |
| elif test "x$enable_native_coverage" = "xno"; then |
| AC_MSG_CHECKING([if native coverage is enabled]) |
| AC_MSG_RESULT([no]) |
| elif test "x$enable_native_coverage" != "x"; then |
| AC_MSG_ERROR([--enable-native-coverage can only be assigned "yes" or "no"]) |
| fi |
| |
| AC_SUBST(GCOV_ENABLED) |
| ]) |
| |
| ################################################################################ |
| # |
| # Static build support. When enabled will generate static |
| # libraries instead of shared libraries for all JDK libs. |
| # |
| AC_DEFUN_ONCE([JDKOPT_SETUP_STATIC_BUILD], |
| [ |
| AC_ARG_ENABLE([static-build], [AS_HELP_STRING([--enable-static-build], |
| [enable static library build @<:@disabled@:>@])]) |
| STATIC_BUILD=false |
| if test "x$enable_static_build" = "xyes"; then |
| AC_MSG_CHECKING([if static build is enabled]) |
| AC_MSG_RESULT([yes]) |
| if test "x$OPENJDK_TARGET_OS" != "xmacosx"; then |
| AC_MSG_ERROR([--enable-static-build is only supported for macosx builds]) |
| fi |
| STATIC_BUILD_CFLAGS="-DSTATIC_BUILD=1" |
| CFLAGS_JDKLIB_EXTRA="$CFLAGS_JDKLIB_EXTRA $STATIC_BUILD_CFLAGS" |
| CXXFLAGS_JDKLIB_EXTRA="$CXXFLAGS_JDKLIB_EXTRA $STATIC_BUILD_CFLAGS" |
| STATIC_BUILD=true |
| elif test "x$enable_static_build" = "xno"; then |
| AC_MSG_CHECKING([if static build is enabled]) |
| AC_MSG_RESULT([no]) |
| elif test "x$enable_static_build" != "x"; then |
| AC_MSG_ERROR([--enable-static-build can only be assigned "yes" or "no"]) |
| fi |
| |
| AC_SUBST(STATIC_BUILD) |
| ]) |
| |
| ################################################################################ |
| # |
| # jlink options. |
| # We always keep packaged modules in JDK image. |
| # |
| AC_DEFUN_ONCE([JDKOPT_SETUP_JLINK_OPTIONS], |
| [ |
| AC_ARG_ENABLE([keep-packaged-modules], [AS_HELP_STRING([--disable-keep-packaged-modules], |
| [Do not keep packaged modules in jdk image @<:@enable@:>@])]) |
| |
| AC_MSG_CHECKING([if packaged modules are kept]) |
| if test "x$enable_keep_packaged_modules" = "xyes"; then |
| AC_MSG_RESULT([yes]) |
| JLINK_KEEP_PACKAGED_MODULES=true |
| elif test "x$enable_keep_packaged_modules" = "xno"; then |
| AC_MSG_RESULT([no]) |
| JLINK_KEEP_PACKAGED_MODULES=false |
| elif test "x$enable_keep_packaged_modules" = "x"; then |
| AC_MSG_RESULT([yes (default)]) |
| JLINK_KEEP_PACKAGED_MODULES=true |
| else |
| AC_MSG_RESULT([error]) |
| AC_MSG_ERROR([--enable-keep-packaged-modules accepts no argument]) |
| fi |
| |
| AC_SUBST(JLINK_KEEP_PACKAGED_MODULES) |
| ]) |
| |
| ################################################################################ |
| # |
| # Check if building of the jtreg failure handler should be enabled. |
| # |
| AC_DEFUN_ONCE([JDKOPT_ENABLE_DISABLE_FAILURE_HANDLER], |
| [ |
| AC_ARG_ENABLE([jtreg-failure-handler], [AS_HELP_STRING([--enable-jtreg-failure-handler], |
| [forces build of the jtreg failure handler to be enabled, missing dependencies |
| become fatal errors. Default is auto, where the failure handler is built if all |
| dependencies are present and otherwise just disabled.])]) |
| |
| AC_MSG_CHECKING([if jtreg failure handler should be built]) |
| |
| if test "x$enable_jtreg_failure_handler" = "xyes"; then |
| if test "x$JT_HOME" = "x"; then |
| AC_MSG_ERROR([Cannot enable jtreg failure handler without jtreg.]) |
| else |
| BUILD_FAILURE_HANDLER=true |
| AC_MSG_RESULT([yes, forced]) |
| fi |
| elif test "x$enable_jtreg_failure_handler" = "xno"; then |
| BUILD_FAILURE_HANDLER=false |
| AC_MSG_RESULT([no, forced]) |
| elif test "x$enable_jtreg_failure_handler" = "xauto" \ |
| || test "x$enable_jtreg_failure_handler" = "x"; then |
| if test "x$JT_HOME" = "x"; then |
| BUILD_FAILURE_HANDLER=false |
| AC_MSG_RESULT([no, missing jtreg]) |
| else |
| BUILD_FAILURE_HANDLER=true |
| AC_MSG_RESULT([yes, jtreg present]) |
| fi |
| else |
| AC_MSG_ERROR([Invalid value for --enable-jtreg-failure-handler: $enable_jtreg_failure_handler]) |
| fi |
| |
| AC_SUBST(BUILD_FAILURE_HANDLER) |
| ]) |
| |
| ################################################################################ |
| # |
| # Enable or disable generation of the classlist at build time |
| # |
| AC_DEFUN_ONCE([JDKOPT_ENABLE_DISABLE_GENERATE_CLASSLIST], |
| [ |
| AC_ARG_ENABLE([generate-classlist], [AS_HELP_STRING([--disable-generate-classlist], |
| [forces enabling or disabling of the generation of a CDS classlist at build time. |
| Default is to generate it when either the server or client JVMs are built.])]) |
| |
| # Check if it's likely that it's possible to generate the classlist. Depending |
| # on exact jvm configuration it could be possible anyway. |
| if HOTSPOT_CHECK_JVM_VARIANT(server) || HOTSPOT_CHECK_JVM_VARIANT(client); then |
| ENABLE_GENERATE_CLASSLIST_POSSIBLE="true" |
| else |
| ENABLE_GENERATE_CLASSLIST_POSSIBLE="false" |
| fi |
| |
| AC_MSG_CHECKING([if the CDS classlist generation should be enabled]) |
| if test "x$enable_generate_classlist" = "xyes"; then |
| AC_MSG_RESULT([yes, forced]) |
| ENABLE_GENERATE_CLASSLIST="true" |
| if test "x$ENABLE_GENERATE_CLASSLIST_POSSIBLE" = "xfalse"; then |
| AC_MSG_WARN([Generation of classlist might not be possible with JVM Variants $JVM_VARIANTS]) |
| fi |
| elif test "x$enable_generate_classlist" = "xno"; then |
| AC_MSG_RESULT([no, forced]) |
| ENABLE_GENERATE_CLASSLIST="false" |
| elif test "x$enable_generate_classlist" = "x"; then |
| if test "x$ENABLE_GENERATE_CLASSLIST_POSSIBLE" = "xtrue"; then |
| AC_MSG_RESULT([yes]) |
| ENABLE_GENERATE_CLASSLIST="true" |
| else |
| AC_MSG_RESULT([no]) |
| ENABLE_GENERATE_CLASSLIST="false" |
| fi |
| else |
| AC_MSG_ERROR([Invalid value for --enable-generate-classlist: $enable_generate_classlist]) |
| fi |
| |
| AC_SUBST(ENABLE_GENERATE_CLASSLIST) |
| ]) |