res/values/config.xml - platform/packages/apps/Car/SystemUI - Gitiles

 <?xml version="1.0" encoding="utf-8"?>
 <!--
   ~ Copyright (C) 2018 The Android Open Source Project
   ~
   ~ Licensed under the Apache License, Version 2.0 (the "License");
   ~ you may not use this file except in compliance with the License.
   ~ You may obtain a copy of the License at
   ~
   ~      http://www.apache.org/licenses/LICENSE-2.0
   ~
   ~ Unless required by applicable law or agreed to in writing, software
   ~ distributed under the License is distributed on an "AS IS" BASIS,
   ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   ~ See the License for the specific language governing permissions and
   ~ limitations under the License
   -->
 <resources>
     <string name="config_statusBarComponent" translatable="false">
         com.android.systemui.statusbar.car.CarStatusBar
     </string>
     <!-- How many milliseconds to wait before force hiding the UserSwitchTransitionView -->
     <integer name="config_userSwitchTransitionViewShownTimeoutMs" translatable="false">5000
     </integer>

     <!-- Configure which system bars should be displayed. -->
     <bool name="config_enableTopSystemBar">true</bool>
     <bool name="config_enableLeftSystemBar">false</bool>
     <bool name="config_enableRightSystemBar">false</bool>
     <bool name="config_enableBottomSystemBar">true</bool>

     <!-- Configure the type of each system bar. Each system bar must have a unique type. -->
     <!--    STATUS_BAR = 0-->
     <!--    NAVIGATION_BAR = 1-->
     <!--    STATUS_BAR_EXTRA = 2-->
     <!--    NAVIGATION_BAR_EXTRA = 3-->
     <integer name="config_topSystemBarType">0</integer>
     <integer name="config_leftSystemBarType">2</integer>
     <integer name="config_rightSystemBarType">3</integer>
     <integer name="config_bottomSystemBarType">1</integer>

     <!-- Configure the relative z-order among the system bars. When two system bars overlap (e.g.
          if both top bar and left bar are enabled, it creates an overlapping space in the upper left
          corner), the system bar with the higher z-order takes the overlapping space and padding is
          applied to the other bar.-->
     <!-- NOTE: If two overlapping system bars have the same z-order, SystemBarConfigs will throw a
          RuntimeException, since their placing order cannot be determined. Bars that do not overlap
          are allowed to have the same z-order. -->
     <!-- NOTE: If the z-order of a bar is 10 or above, it will also appear on top of HUN's.    -->
     <integer name="config_topSystemBarZOrder">1</integer>
     <integer name="config_leftSystemBarZOrder">0</integer>
     <integer name="config_rightSystemBarZOrder">0</integer>
     <integer name="config_bottomSystemBarZOrder">10</integer>

     <!-- If set to true, the corresponding system bar will be hidden when Keyboard (IME) appears.
          NOTE: hideBottomSystemBarKeyboard must not be overlaid directly here. To change its value,
          overlay config_hideNavBarForKeyboard in framework/base/core/res/res. -->
     <bool name="config_hideTopSystemBarForKeyboard">false</bool>
     <bool name="config_hideLeftSystemBarForKeyboard">false</bool>
     <bool name="config_hideRightSystemBarForKeyboard">false</bool>
     <bool name="config_hideBottomSystemBarForKeyboard">@*android:bool/config_hideNavBarForKeyboard</bool>

     <!-- If set to false, requests CarSystemBarViews to not intercept touch events to make it easier
         to touch the buttons without accidentally expanding the notification panel.-->
     <bool name="config_systemBarButtonsDraggable">false</bool>

     <!--
     Car SystemUI's notification mediator. Replace with other notification mediators to have
     the notification panel show from another system bar. The system bar should be enabled to
     use the mediator with that system bar.
     Example: config_enableBottomSystemBar=true
              config_notificationPanelViewMediator=
                 com.android.systemui.car.notification.BottomNotificationPanelViewMediator -->
     <string name="config_notificationPanelViewMediator" translatable="false">
         com.android.systemui.car.notification.TopNotificationPanelViewMediator</string>

     <!-- Whether the Notification Panel should be inset by the top system bar. -->
     <bool name="config_notif_panel_inset_by_top_systembar" translatable="false">false</bool>
     <!-- Whether the Notification Panel should be inset by the bottom system bar. -->
     <bool name="config_notif_panel_inset_by_bottom_systembar" translatable="false">true</bool>
     <!-- Whether the Notification Panel should be inset by the left system bar. -->
     <bool name="config_notif_panel_inset_by_left_systembar" translatable="false">false</bool>
     <!-- Whether the Notification Panel should be inset by the right system bar. -->
     <bool name="config_notif_panel_inset_by_right_systembar" translatable="false">false</bool>

     <!-- Whether navigationBar touch events should be consumed before reaching the CarFacetButton \
          when the notification panel is open. -->
     <bool name="config_consumeSystemBarTouchWhenNotificationPanelOpen">false</bool>

     <!-- Whether heads-up notifications should be shown when panel is open. -->
     <bool name="config_enableHeadsUpNotificationWhenNotificationPanelOpen">true</bool>

     <!-- Whether or not the profile panel should be disabled while driving. -->
     <bool name="config_profile_panel_disabled_while_driving">true</bool>

     <!--
         Initial alpha percent value for the background when the notification
         panel is open. Should be a number between, and inclusive, 0 and 100.
         If the number is 0, then the background alpha starts off fully
         transparent. If the number if 100, then the background alpha starts off
         fully opaque. -->
     <integer name="config_initialNotificationBackgroundAlpha">0</integer>
     <!--
         Final alpha percent value for the background when the notification
         panel is fully open. Should be a number between, and inclusive, 0 and
         100. If this value is smaller than
         config_initialNotificationBackgroundAlpha, the background will default
         to a constant alpha percent value using the initial alpha. -->
     <integer name="config_finalNotificationBackgroundAlpha">100</integer>

     <!-- Car System UI's OverlayViewsMediator.
          Whenever a new class is added, make sure to also add that class to OverlayWindowModule. -->
     <string-array name="config_carSystemUIOverlayViewsMediators" translatable="false">
         <item>@string/config_notificationPanelViewMediator</item>
         <item>com.android.systemui.car.hvac.HvacPanelOverlayViewMediator</item>
         <item>com.android.systemui.car.keyguard.CarKeyguardViewMediator</item>
         <item>com.android.systemui.car.systemdialogs.SystemDialogsViewMediator</item>
         <item>com.android.systemui.car.userswitcher.FullscreenUserSwitcherViewMediator</item>
         <item>com.android.systemui.car.userswitcher.UserSwitchTransitionViewMediator</item>
     </string-array>

     <!-- List of StatusIconControllers associated with icons to display for QC entry points.
          The icons will be added to the view in the order their controllers appear on this list. -->
     <string-array name="config_quickControlsEntryPointIconControllers" translatable="false">
         <item>com.android.systemui.car.statusicon.ui.BluetoothStatusIconController</item>
         <item>com.android.systemui.car.statusicon.ui.SignalStatusIconController</item>
         <item>com.android.systemui.car.statusicon.ui.DisplayStatusIconController</item>
     </string-array>

     <!-- List of StatusIconControllers associated with read-only status icons.
          The icons will be added to the view in the order their controllers appear on this list.-->
     <string-array name="config_readOnlyIconControllers" translatable="false">
         <item>com.android.systemui.car.statusicon.ui.LocationStatusIconController</item>
         <item>com.android.systemui.car.statusicon.ui.PhoneCallStatusIconController</item>
     </string-array>

     <!-- List of package names that are allowed sources of app installation. -->
     <string-array name="config_allowedAppInstallSources" translatable="false">
         <item>com.android.vending</item>
     </string-array>

     <!-- Defines system icons to be excluded from the display. That is to say, the icons in the
          status bar that are part of this list are never displayed. Each item in the list must be a
          string defined in core/res/res/config.xml to properly exclude the icon.
      -->
     <string-array name="config_statusBarIconsToExclude" translatable="false">
         <item>@*android:string/status_bar_rotate</item>
         <item>@*android:string/status_bar_headset</item>
         <item>@*android:string/status_bar_microphone</item>
     </string-array>

     <!-- Packages that can post toasts even if it isn't a system application. -->
     <string-array name="config_restrictedToastsPackageNameAllowList" translatable="false">
         <!-- These packages may be used for CTS purposes. -->
         <item>android.widget.cts</item>
         <item>android.server.wm.app</item>
         <item>android.server.wm.cts</item>
         <item>android.server.wm.second</item>
         <item>com.android.cts.verifier</item>
     </string-array>

     <!-- Specifies the component name of the app grid activity -->
     <string name="config_appGridComponentName" translatable="false">com.android.car.carlauncher/.AppGridActivity</string>

     <!--Percentage of the screen height, from the top, where the border between HVAC panel closing
         or opening, depending on where its handle bar is released after being dragged, would be
         drawn.

         The idea is that if the HVAC panel handle bar is dragged and then released too close to the
         panel's origin, then the intent to close the panel is seen to have been canceled, and the
         panel is expanded back to its original height. On the other hand, if the handle bar is
         released far enough from the panel's origin, then the panel is collapsed and dismissed.

         If the HVAC panel expands from below, then the HVAC panel handle bar being released below
         this border would result in the panel being dismissed and collapsed, while it being released
         above the border results in the panel being expanded back to the original height.

         If the HVAC panel expands from the top, then the HVAC panel handle bar being released above
         this border would result in the panel being dismissed and collapsed, while it being released
         below the border results in the panel being expanded back to the original height.
     -->
     <integer name="hvac_panel_settle_close_percentage">50</integer>

     <!-- Determines whether the shell features all run on another thread. -->
     <bool name="config_enableShellMainThread">true</bool>

     <!-- Determines whether the shell task organizer be registered automatiacly or not.
          It needs to be disabled for CarSystemUI as CarLauncher already registers one. With 2
          organizers there can be recovery problems if either of the process crashes. -->
     <bool name="config_registerShellTaskOrganizerOnInit">false</bool>
 </resources>
	<?xml version="1.0" encoding="utf-8"?>
	<!--
	~ Copyright (C) 2018 The Android Open Source Project
	~
	~ Licensed under the Apache License, Version 2.0 (the "License");
	~ you may not use this file except in compliance with the License.
	~ You may obtain a copy of the License at
	~
	~ http://www.apache.org/licenses/LICENSE-2.0
	~
	~ Unless required by applicable law or agreed to in writing, software
	~ distributed under the License is distributed on an "AS IS" BASIS,
	~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	~ See the License for the specific language governing permissions and
	~ limitations under the License
	-->
	<resources>
	<string name="config_statusBarComponent" translatable="false">
	com.android.systemui.statusbar.car.CarStatusBar
	</string>
	<!-- How many milliseconds to wait before force hiding the UserSwitchTransitionView -->
	<integer name="config_userSwitchTransitionViewShownTimeoutMs" translatable="false">5000
	</integer>

	<!-- Configure which system bars should be displayed. -->
	<bool name="config_enableTopSystemBar">true</bool>
	<bool name="config_enableLeftSystemBar">false</bool>
	<bool name="config_enableRightSystemBar">false</bool>
	<bool name="config_enableBottomSystemBar">true</bool>

	<!-- Configure the type of each system bar. Each system bar must have a unique type. -->
	<!-- STATUS_BAR = 0-->
	<!-- NAVIGATION_BAR = 1-->
	<!-- STATUS_BAR_EXTRA = 2-->
	<!-- NAVIGATION_BAR_EXTRA = 3-->
	<integer name="config_topSystemBarType">0</integer>
	<integer name="config_leftSystemBarType">2</integer>
	<integer name="config_rightSystemBarType">3</integer>
	<integer name="config_bottomSystemBarType">1</integer>

	<!-- Configure the relative z-order among the system bars. When two system bars overlap (e.g.
	if both top bar and left bar are enabled, it creates an overlapping space in the upper left
	corner), the system bar with the higher z-order takes the overlapping space and padding is
	applied to the other bar.-->
	<!-- NOTE: If two overlapping system bars have the same z-order, SystemBarConfigs will throw a
	RuntimeException, since their placing order cannot be determined. Bars that do not overlap
	are allowed to have the same z-order. -->
	<!-- NOTE: If the z-order of a bar is 10 or above, it will also appear on top of HUN's. -->
	<integer name="config_topSystemBarZOrder">1</integer>
	<integer name="config_leftSystemBarZOrder">0</integer>
	<integer name="config_rightSystemBarZOrder">0</integer>
	<integer name="config_bottomSystemBarZOrder">10</integer>

	<!-- If set to true, the corresponding system bar will be hidden when Keyboard (IME) appears.
	NOTE: hideBottomSystemBarKeyboard must not be overlaid directly here. To change its value,
	overlay config_hideNavBarForKeyboard in framework/base/core/res/res. -->
	<bool name="config_hideTopSystemBarForKeyboard">false</bool>
	<bool name="config_hideLeftSystemBarForKeyboard">false</bool>
	<bool name="config_hideRightSystemBarForKeyboard">false</bool>
	<bool name="config_hideBottomSystemBarForKeyboard">@*android:bool/config_hideNavBarForKeyboard</bool>

	<!-- If set to false, requests CarSystemBarViews to not intercept touch events to make it easier
	to touch the buttons without accidentally expanding the notification panel.-->
	<bool name="config_systemBarButtonsDraggable">false</bool>

	<!--
	Car SystemUI's notification mediator. Replace with other notification mediators to have
	the notification panel show from another system bar. The system bar should be enabled to
	use the mediator with that system bar.
	Example: config_enableBottomSystemBar=true
	config_notificationPanelViewMediator=
	com.android.systemui.car.notification.BottomNotificationPanelViewMediator -->
	<string name="config_notificationPanelViewMediator" translatable="false">
	com.android.systemui.car.notification.TopNotificationPanelViewMediator</string>

	<!-- Whether the Notification Panel should be inset by the top system bar. -->
	<bool name="config_notif_panel_inset_by_top_systembar" translatable="false">false</bool>
	<!-- Whether the Notification Panel should be inset by the bottom system bar. -->
	<bool name="config_notif_panel_inset_by_bottom_systembar" translatable="false">true</bool>
	<!-- Whether the Notification Panel should be inset by the left system bar. -->
	<bool name="config_notif_panel_inset_by_left_systembar" translatable="false">false</bool>
	<!-- Whether the Notification Panel should be inset by the right system bar. -->
	<bool name="config_notif_panel_inset_by_right_systembar" translatable="false">false</bool>

	<!-- Whether navigationBar touch events should be consumed before reaching the CarFacetButton \
	when the notification panel is open. -->
	<bool name="config_consumeSystemBarTouchWhenNotificationPanelOpen">false</bool>

	<!-- Whether heads-up notifications should be shown when panel is open. -->
	<bool name="config_enableHeadsUpNotificationWhenNotificationPanelOpen">true</bool>

	<!-- Whether or not the profile panel should be disabled while driving. -->
	<bool name="config_profile_panel_disabled_while_driving">true</bool>

	<!--
	Initial alpha percent value for the background when the notification
	panel is open. Should be a number between, and inclusive, 0 and 100.
	If the number is 0, then the background alpha starts off fully
	transparent. If the number if 100, then the background alpha starts off
	fully opaque. -->
	<integer name="config_initialNotificationBackgroundAlpha">0</integer>
	<!--
	Final alpha percent value for the background when the notification
	panel is fully open. Should be a number between, and inclusive, 0 and
	100. If this value is smaller than
	config_initialNotificationBackgroundAlpha, the background will default
	to a constant alpha percent value using the initial alpha. -->
	<integer name="config_finalNotificationBackgroundAlpha">100</integer>

	<!-- Car System UI's OverlayViewsMediator.
	Whenever a new class is added, make sure to also add that class to OverlayWindowModule. -->
	<string-array name="config_carSystemUIOverlayViewsMediators" translatable="false">
	<item>@string/config_notificationPanelViewMediator</item>
	<item>com.android.systemui.car.hvac.HvacPanelOverlayViewMediator</item>
	<item>com.android.systemui.car.keyguard.CarKeyguardViewMediator</item>
	<item>com.android.systemui.car.systemdialogs.SystemDialogsViewMediator</item>
	<item>com.android.systemui.car.userswitcher.FullscreenUserSwitcherViewMediator</item>
	<item>com.android.systemui.car.userswitcher.UserSwitchTransitionViewMediator</item>
	</string-array>

	<!-- List of StatusIconControllers associated with icons to display for QC entry points.
	The icons will be added to the view in the order their controllers appear on this list. -->
	<string-array name="config_quickControlsEntryPointIconControllers" translatable="false">
	<item>com.android.systemui.car.statusicon.ui.BluetoothStatusIconController</item>
	<item>com.android.systemui.car.statusicon.ui.SignalStatusIconController</item>
	<item>com.android.systemui.car.statusicon.ui.DisplayStatusIconController</item>
	</string-array>

	<!-- List of StatusIconControllers associated with read-only status icons.
	The icons will be added to the view in the order their controllers appear on this list.-->
	<string-array name="config_readOnlyIconControllers" translatable="false">
	<item>com.android.systemui.car.statusicon.ui.LocationStatusIconController</item>
	<item>com.android.systemui.car.statusicon.ui.PhoneCallStatusIconController</item>
	</string-array>

	<!-- List of package names that are allowed sources of app installation. -->
	<string-array name="config_allowedAppInstallSources" translatable="false">
	<item>com.android.vending</item>
	</string-array>

	<!-- Defines system icons to be excluded from the display. That is to say, the icons in the
	status bar that are part of this list are never displayed. Each item in the list must be a
	string defined in core/res/res/config.xml to properly exclude the icon.
	-->
	<string-array name="config_statusBarIconsToExclude" translatable="false">
	<item>@*android:string/status_bar_rotate</item>
	<item>@*android:string/status_bar_headset</item>
	<item>@*android:string/status_bar_microphone</item>
	</string-array>

	<!-- Packages that can post toasts even if it isn't a system application. -->
	<string-array name="config_restrictedToastsPackageNameAllowList" translatable="false">
	<!-- These packages may be used for CTS purposes. -->
	<item>android.widget.cts</item>
	<item>android.server.wm.app</item>
	<item>android.server.wm.cts</item>
	<item>android.server.wm.second</item>
	<item>com.android.cts.verifier</item>
	</string-array>

	<!-- Specifies the component name of the app grid activity -->
	<string name="config_appGridComponentName" translatable="false">com.android.car.carlauncher/.AppGridActivity</string>

	<!--Percentage of the screen height, from the top, where the border between HVAC panel closing
	or opening, depending on where its handle bar is released after being dragged, would be
	drawn.

	The idea is that if the HVAC panel handle bar is dragged and then released too close to the
	panel's origin, then the intent to close the panel is seen to have been canceled, and the
	panel is expanded back to its original height. On the other hand, if the handle bar is
	released far enough from the panel's origin, then the panel is collapsed and dismissed.

	If the HVAC panel expands from below, then the HVAC panel handle bar being released below
	this border would result in the panel being dismissed and collapsed, while it being released
	above the border results in the panel being expanded back to the original height.

	If the HVAC panel expands from the top, then the HVAC panel handle bar being released above
	this border would result in the panel being dismissed and collapsed, while it being released
	below the border results in the panel being expanded back to the original height.
	-->
	<integer name="hvac_panel_settle_close_percentage">50</integer>

	<!-- Determines whether the shell features all run on another thread. -->
	<bool name="config_enableShellMainThread">true</bool>

	<!-- Determines whether the shell task organizer be registered automatiacly or not.
	It needs to be disabled for CarSystemUI as CarLauncher already registers one. With 2
	organizers there can be recovery problems if either of the process crashes. -->
	<bool name="config_registerShellTaskOrganizerOnInit">false</bool>
	</resources>