| /* |
| * Copyright (C) 2009 bsdroid project |
| * Alexey Tarasov <tarasov@dodologics.com> |
| * |
| * Copyright (C) 2007 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <sys/endian.h> |
| #include <sys/ioctl.h> |
| #include <sys/types.h> |
| #include <sys/uio.h> |
| |
| #include <err.h> |
| #include <errno.h> |
| #include <poll.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <strings.h> |
| #include <string.h> |
| #include <sysexits.h> |
| #include <unistd.h> |
| #include <libusb.h> |
| #include "sysdeps.h" |
| |
| #define TRACE_TAG TRACE_USB |
| #include "adb.h" |
| |
| static adb_mutex_t usb_lock = ADB_MUTEX_INITIALIZER; |
| static libusb_context *ctx = NULL; |
| |
| struct usb_handle |
| { |
| usb_handle *prev; |
| usb_handle *next; |
| |
| libusb_device *dev; |
| libusb_device_handle *devh; |
| int interface; |
| uint8_t dev_bus; |
| uint8_t dev_addr; |
| |
| int zero_mask; |
| unsigned char end_point_address[2]; |
| char serial[128]; |
| |
| adb_cond_t notify; |
| adb_mutex_t lock; |
| }; |
| |
| static struct usb_handle handle_list = { |
| .prev = &handle_list, |
| .next = &handle_list, |
| }; |
| |
| void |
| usb_cleanup() |
| { |
| libusb_exit(ctx); |
| } |
| |
| void |
| report_bulk_libusb_error(int r) |
| { |
| switch (r) { |
| case LIBUSB_ERROR_TIMEOUT: |
| D("Transfer timeout\n"); |
| break; |
| |
| case LIBUSB_ERROR_PIPE: |
| D("Control request is not supported\n"); |
| break; |
| |
| case LIBUSB_ERROR_OVERFLOW: |
| D("Device offered more data\n"); |
| break; |
| |
| case LIBUSB_ERROR_NO_DEVICE : |
| D("Device was disconnected\n"); |
| break; |
| |
| default: |
| D("Error %d during transfer\n", r); |
| break; |
| }; |
| } |
| |
| static int |
| usb_bulk_write(usb_handle *uh, const void *data, int len) |
| { |
| int r = 0; |
| int transferred = 0; |
| |
| r = libusb_bulk_transfer(uh->devh, uh->end_point_address[1], (void *)data, len, |
| &transferred, 0); |
| |
| if (r != 0) { |
| D("usb_bulk_write(): "); |
| report_bulk_libusb_error(r); |
| return r; |
| } |
| |
| return (transferred); |
| } |
| |
| static int |
| usb_bulk_read(usb_handle *uh, void *data, int len) |
| { |
| int r = 0; |
| int transferred = 0; |
| |
| r = libusb_bulk_transfer(uh->devh, uh->end_point_address[0], data, len, |
| &transferred, 0); |
| |
| if (r != 0) { |
| D("usb_bulk_read(): "); |
| report_bulk_libusb_error(r); |
| return r; |
| } |
| |
| return (transferred); |
| } |
| |
| int |
| usb_write(struct usb_handle *uh, const void *_data, int len) |
| { |
| unsigned char *data = (unsigned char*) _data; |
| int n; |
| int need_zero = 0; |
| |
| if (uh->zero_mask == 1) { |
| if (!(len & uh->zero_mask)) { |
| need_zero = 1; |
| } |
| } |
| |
| D("usb_write(): %p:%d -> transport %p\n", _data, len, uh); |
| |
| while (len > 0) { |
| int xfer = (len > 4096) ? 4096 : len; |
| |
| n = usb_bulk_write(uh, data, xfer); |
| |
| if (n != xfer) { |
| D("usb_write(): failed for transport %p (%d bytes left)\n", uh, len); |
| return -1; |
| } |
| |
| len -= xfer; |
| data += xfer; |
| } |
| |
| if (need_zero){ |
| n = usb_bulk_write(uh, _data, 0); |
| |
| if (n < 0) { |
| D("usb_write(): failed to finish operation for transport %p\n", uh); |
| } |
| return n; |
| } |
| |
| return 0; |
| } |
| |
| int |
| usb_read(struct usb_handle *uh, void *_data, int len) |
| { |
| unsigned char *data = (unsigned char*) _data; |
| int n; |
| |
| D("usb_read(): %p:%d <- transport %p\n", _data, len, uh); |
| |
| while (len > 0) { |
| int xfer = (len > 4096) ? 4096 : len; |
| |
| n = usb_bulk_read(uh, data, xfer); |
| |
| if (n != xfer) { |
| if (n > 0) { |
| data += n; |
| len -= n; |
| continue; |
| } |
| |
| D("usb_read(): failed for transport %p (%d bytes left)\n", uh, len); |
| return -1; |
| } |
| |
| len -= xfer; |
| data += xfer; |
| } |
| |
| return 0; |
| } |
| |
| int |
| usb_close(struct usb_handle *h) |
| { |
| D("usb_close(): closing transport %p\n", h); |
| adb_mutex_lock(&usb_lock); |
| |
| h->next->prev = h->prev; |
| h->prev->next = h->next; |
| h->prev = NULL; |
| h->next = NULL; |
| |
| libusb_release_interface(h->devh, h->interface); |
| libusb_close(h->devh); |
| libusb_unref_device(h->dev); |
| |
| adb_mutex_unlock(&usb_lock); |
| |
| free(h); |
| |
| return (0); |
| } |
| |
| void usb_kick(struct usb_handle *h) |
| { |
| D("usb_cick(): kicking transport %p\n", h); |
| |
| adb_mutex_lock(&h->lock); |
| unregister_usb_transport(h); |
| adb_mutex_unlock(&h->lock); |
| |
| h->next->prev = h->prev; |
| h->prev->next = h->next; |
| h->prev = NULL; |
| h->next = NULL; |
| |
| libusb_release_interface(h->devh, h->interface); |
| libusb_close(h->devh); |
| libusb_unref_device(h->dev); |
| free(h); |
| } |
| |
| int |
| check_usb_interface(libusb_interface *interface, |
| libusb_device_descriptor *desc, |
| struct usb_handle *uh) |
| { |
| int e; |
| |
| if (interface->num_altsetting == 0) { |
| D("check_usb_interface(): No interface settings\n"); |
| return -1; |
| } |
| |
| libusb_interface_descriptor *idesc = &interface->altsetting[0]; |
| |
| if (idesc->bNumEndpoints != 2) { |
| D("check_usb_interface(): Interface have not 2 endpoints, ignoring\n"); |
| return -1; |
| } |
| |
| for (e = 0; e < idesc->bNumEndpoints; e++) { |
| libusb_endpoint_descriptor *edesc = &idesc->endpoint[e]; |
| |
| if (edesc->bmAttributes != LIBUSB_TRANSFER_TYPE_BULK) { |
| D("check_usb_interface(): Endpoint (%u) is not bulk (%u), ignoring\n", |
| edesc->bmAttributes, LIBUSB_TRANSFER_TYPE_BULK); |
| return -1; |
| } |
| |
| if (edesc->bEndpointAddress & LIBUSB_ENDPOINT_IN) |
| uh->end_point_address[0] = edesc->bEndpointAddress; |
| else |
| uh->end_point_address[1] = edesc->bEndpointAddress; |
| |
| /* aproto 01 needs 0 termination */ |
| if (idesc->bInterfaceProtocol == 0x01) { |
| uh->zero_mask = edesc->wMaxPacketSize - 1; |
| D("check_usb_interface(): Forced Android interface protocol v.1\n"); |
| } |
| } |
| |
| D("check_usb_interface(): Device: %04x:%04x " |
| "iclass: %x, isclass: %x, iproto: %x ep: %x/%x-> ", |
| desc->idVendor, desc->idProduct, idesc->bInterfaceClass, |
| idesc->bInterfaceSubClass, idesc->bInterfaceProtocol, |
| uh->end_point_address[0], uh->end_point_address[1]); |
| |
| if (!is_adb_interface(desc->idVendor, desc->idProduct, |
| idesc->bInterfaceClass, idesc->bInterfaceSubClass, |
| idesc->bInterfaceProtocol)) |
| { |
| D("not matches\n"); |
| return -1; |
| } |
| |
| D("matches\n"); |
| return 1; |
| } |
| |
| int |
| check_usb_interfaces(libusb_config_descriptor *config, |
| libusb_device_descriptor *desc, struct usb_handle *uh) |
| { |
| int i; |
| |
| for (i = 0; i < config->bNumInterfaces; ++i) { |
| if (check_usb_interface(&config->interface[i], desc, uh) != -1) { |
| /* found some interface and saved information about it */ |
| D("check_usb_interfaces(): Interface %d of %04x:%04x " |
| "matches Android device\n", i, desc->idVendor, |
| desc->idProduct); |
| |
| return i; |
| } |
| } |
| |
| return -1; |
| } |
| |
| int |
| register_device(struct usb_handle *uh, const char *serial) |
| { |
| D("register_device(): Registering %p [%s] as USB transport\n", |
| uh, serial); |
| |
| struct usb_handle *usb= NULL; |
| |
| usb = calloc(1, sizeof(struct usb_handle)); |
| memcpy(usb, uh, sizeof(struct usb_handle)); |
| strcpy(usb->serial, uh->serial); |
| |
| adb_cond_init(&usb->notify, 0); |
| adb_mutex_init(&usb->lock, 0); |
| |
| adb_mutex_lock(&usb_lock); |
| |
| usb->next = &handle_list; |
| usb->prev = handle_list.prev; |
| usb->prev->next = usb; |
| usb->next->prev = usb; |
| |
| adb_mutex_unlock(&usb_lock); |
| |
| register_usb_transport(usb, serial, NULL, 1); |
| |
| return (1); |
| } |
| |
| int |
| already_registered(usb_handle *uh) |
| { |
| struct usb_handle *usb= NULL; |
| int exists = 0; |
| |
| adb_mutex_lock(&usb_lock); |
| |
| for (usb = handle_list.next; usb != &handle_list; usb = usb->next) { |
| if ((usb->dev_bus == uh->dev_bus) && |
| (usb->dev_addr == uh->dev_addr)) |
| { |
| exists = 1; |
| break; |
| } |
| } |
| |
| adb_mutex_unlock(&usb_lock); |
| |
| return exists; |
| } |
| |
| void |
| check_device(libusb_device *dev) |
| { |
| struct usb_handle uh; |
| int i = 0; |
| int found = -1; |
| char serial[256] = {0}; |
| |
| libusb_device_descriptor desc; |
| libusb_config_descriptor *config = NULL; |
| |
| int r = libusb_get_device_descriptor(dev, &desc); |
| |
| if (r != LIBUSB_SUCCESS) { |
| D("check_device(): Failed to get device descriptor\n"); |
| return; |
| } |
| |
| if ((desc.idVendor == 0) && (desc.idProduct == 0)) |
| return; |
| |
| D("check_device(): Probing usb device %04x:%04x\n", |
| desc.idVendor, desc.idProduct); |
| |
| if (!is_adb_interface (desc.idVendor, desc.idProduct, |
| ADB_CLASS, ADB_SUBCLASS, ADB_PROTOCOL)) |
| { |
| D("check_device(): Ignored due unknown vendor id\n"); |
| return; |
| } |
| |
| uh.dev_bus = libusb_get_bus_number(dev); |
| uh.dev_addr = libusb_get_device_address(dev); |
| |
| if (already_registered(&uh)) { |
| D("check_device(): Device (bus: %d, address: %d) " |
| "is already registered\n", uh.dev_bus, uh.dev_addr); |
| return; |
| } |
| |
| D("check_device(): Device bus: %d, address: %d\n", |
| uh.dev_bus, uh.dev_addr); |
| |
| r = libusb_get_active_config_descriptor(dev, &config); |
| |
| if (r != 0) { |
| if (r == LIBUSB_ERROR_NOT_FOUND) { |
| D("check_device(): Device %4x:%4x is unconfigured\n", |
| desc.idVendor, desc.idProduct); |
| return; |
| } |
| |
| D("check_device(): Failed to get configuration for %4x:%4x\n", |
| desc.idVendor, desc.idProduct); |
| return; |
| } |
| |
| if (config == NULL) { |
| D("check_device(): Sanity check failed after " |
| "getting active config\n"); |
| return; |
| } |
| |
| if (config->interface != NULL) { |
| found = check_usb_interfaces(config, &desc, &uh); |
| } |
| |
| /* not needed anymore */ |
| libusb_free_config_descriptor(config); |
| |
| r = libusb_open(dev, &uh.devh); |
| uh.dev = dev; |
| |
| if (r != 0) { |
| switch (r) { |
| case LIBUSB_ERROR_NO_MEM: |
| D("check_device(): Memory allocation problem\n"); |
| break; |
| |
| case LIBUSB_ERROR_ACCESS: |
| D("check_device(): Permissions problem, " |
| "current user priveleges are messed up?\n"); |
| break; |
| |
| case LIBUSB_ERROR_NO_DEVICE: |
| D("check_device(): Device disconected, bad cable?\n"); |
| break; |
| |
| default: |
| D("check_device(): libusb triggered error %d\n", r); |
| } |
| // skip rest |
| found = -1; |
| } |
| |
| if (found >= 0) { |
| D("check_device(): Device matches Android interface\n"); |
| // read the device's serial number |
| memset(serial, 0, sizeof(serial)); |
| uh.interface = found; |
| |
| r = libusb_claim_interface(uh.devh, uh.interface); |
| |
| if (r < 0) { |
| D("check_device(): Failed to claim interface %d\n", |
| uh.interface); |
| |
| goto fail; |
| } |
| |
| if (desc.iSerialNumber) { |
| // reading serial |
| uint16_t buffer[128] = {0}; |
| uint16_t languages[128] = {0}; |
| int languageCount = 0; |
| |
| memset(languages, 0, sizeof(languages)); |
| r = libusb_control_transfer(uh.devh, |
| LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_STANDARD | LIBUSB_RECIPIENT_DEVICE, |
| LIBUSB_REQUEST_GET_DESCRIPTOR, LIBUSB_DT_STRING << 8, |
| 0, (uint8_t *)languages, sizeof(languages), 0); |
| |
| if (r <= 0) { |
| D("check_device(): Failed to get languages count\n"); |
| goto fail; |
| } |
| |
| languageCount = (r - 2) / 2; |
| |
| for (i = 1; i <= languageCount; ++i) { |
| memset(buffer, 0, sizeof(buffer)); |
| |
| r = libusb_control_transfer(uh.devh, |
| LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_STANDARD | LIBUSB_RECIPIENT_DEVICE, |
| LIBUSB_REQUEST_GET_DESCRIPTOR, (LIBUSB_DT_STRING << 8) | desc.iSerialNumber, |
| languages[i], (uint8_t *)buffer, sizeof(buffer), 0); |
| |
| if (r > 0) { /* converting serial */ |
| int j = 0; |
| r /= 2; |
| |
| for (j = 1; j < r; ++j) |
| serial[j - 1] = buffer[j]; |
| |
| serial[j - 1] = '\0'; |
| break; /* languagesCount cycle */ |
| } |
| } |
| |
| if (register_device(&uh, serial) == 0) { |
| D("check_device(): Failed to register device\n"); |
| goto fail_interface; |
| } |
| |
| libusb_ref_device(dev); |
| } |
| } |
| |
| return; |
| |
| fail_interface: |
| libusb_release_interface(uh.devh, uh.interface); |
| |
| fail: |
| libusb_close(uh.devh); |
| uh.devh = NULL; |
| } |
| |
| int |
| check_device_connected(struct usb_handle *uh) |
| { |
| int r = libusb_kernel_driver_active(uh->devh, uh->interface); |
| |
| if (r == LIBUSB_ERROR_NO_DEVICE) |
| return 0; |
| |
| if (r < 0) |
| return -1; |
| |
| return 1; |
| } |
| |
| void |
| kick_disconnected() |
| { |
| struct usb_handle *usb= NULL; |
| |
| adb_mutex_lock(&usb_lock); |
| |
| for (usb = handle_list.next; usb != &handle_list; usb = usb->next) { |
| |
| if (check_device_connected(usb) == 0) { |
| D("kick_disconnected(): Transport %p is not online anymore\n", |
| usb); |
| |
| usb_kick(usb); |
| } |
| } |
| |
| adb_mutex_unlock(&usb_lock); |
| } |
| |
| void |
| scan_usb_devices() |
| { |
| D("scan_usb_devices(): started\n"); |
| |
| libusb_device **devs= NULL; |
| libusb_device *dev= NULL; |
| ssize_t cnt = libusb_get_device_list(ctx, &devs); |
| |
| if (cnt < 0) { |
| D("scan_usb_devices(): Failed to get device list (error: %d)\n", |
| cnt); |
| |
| return; |
| } |
| |
| int i = 0; |
| |
| while ((dev = devs[i++]) != NULL) { |
| check_device(dev); |
| } |
| |
| libusb_free_device_list(devs, 1); |
| } |
| |
| void * |
| device_poll_thread(void* unused) |
| { |
| D("device_poll_thread(): Created USB scan thread\n"); |
| |
| for (;;) { |
| sleep(5); |
| kick_disconnected(); |
| scan_usb_devices(); |
| } |
| |
| /* never reaching this point */ |
| return (NULL); |
| } |
| |
| static void |
| sigalrm_handler(int signo) |
| { |
| /* nothing */ |
| } |
| |
| void |
| usb_init() |
| { |
| D("usb_init(): started\n"); |
| adb_thread_t tid; |
| struct sigaction actions; |
| |
| int r = libusb_init(&ctx); |
| |
| if (r != LIBUSB_SUCCESS) { |
| err(EX_IOERR, "Failed to init libusb\n"); |
| } |
| |
| memset(&actions, 0, sizeof(actions)); |
| |
| sigemptyset(&actions.sa_mask); |
| |
| actions.sa_flags = 0; |
| actions.sa_handler = sigalrm_handler; |
| |
| sigaction(SIGALRM, &actions, NULL); |
| |
| /* initial device scan */ |
| scan_usb_devices(); |
| |
| /* starting USB event polling thread */ |
| if (adb_thread_create(&tid, device_poll_thread, NULL)) { |
| err(EX_IOERR, "cannot create USB scan thread\n"); |
| } |
| |
| D("usb_init(): finished\n"); |
| } |
| |