| /* | 
 |  * Copyright (C) 2007 The Android Open Source Project | 
 |  * | 
 |  * Licensed under the Apache License, Version 2.0 (the "License"); | 
 |  * you may not use this file except in compliance with the License. | 
 |  * You may obtain a copy of the License at | 
 |  * | 
 |  *      http://www.apache.org/licenses/LICENSE-2.0 | 
 |  * | 
 |  * Unless required by applicable law or agreed to in writing, software | 
 |  * distributed under the License is distributed on an "AS IS" BASIS, | 
 |  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
 |  * See the License for the specific language governing permissions and | 
 |  * limitations under the License. | 
 |  */ | 
 |  | 
 | #define TRACE_TAG USB | 
 |  | 
 | #include "sysdeps.h" | 
 |  | 
 | #include <cutils/properties.h> | 
 | #include <dirent.h> | 
 | #include <errno.h> | 
 | #include <linux/usb/ch9.h> | 
 | #include <linux/usb/functionfs.h> | 
 | #include <stdio.h> | 
 | #include <stdlib.h> | 
 | #include <string.h> | 
 | #include <sys/ioctl.h> | 
 | #include <sys/types.h> | 
 | #include <unistd.h> | 
 |  | 
 | #include "adb.h" | 
 | #include "transport.h" | 
 |  | 
 | #define MAX_PACKET_SIZE_FS	64 | 
 | #define MAX_PACKET_SIZE_HS	512 | 
 | #define MAX_PACKET_SIZE_SS	1024 | 
 |  | 
 | #define cpu_to_le16(x)  htole16(x) | 
 | #define cpu_to_le32(x)  htole32(x) | 
 |  | 
 | struct usb_handle | 
 | { | 
 |     adb_cond_t notify; | 
 |     adb_mutex_t lock; | 
 |  | 
 |     int (*write)(usb_handle *h, const void *data, int len); | 
 |     int (*read)(usb_handle *h, void *data, int len); | 
 |     void (*kick)(usb_handle *h); | 
 |  | 
 |     // Legacy f_adb | 
 |     int fd; | 
 |  | 
 |     // FunctionFS | 
 |     int control; | 
 |     int bulk_out; /* "out" from the host's perspective => source for adbd */ | 
 |     int bulk_in;  /* "in" from the host's perspective => sink for adbd */ | 
 | }; | 
 |  | 
 | struct func_desc { | 
 |     struct usb_interface_descriptor intf; | 
 |     struct usb_endpoint_descriptor_no_audio source; | 
 |     struct usb_endpoint_descriptor_no_audio sink; | 
 | } __attribute__((packed)); | 
 |  | 
 | struct ss_func_desc { | 
 |     struct usb_interface_descriptor intf; | 
 |     struct usb_endpoint_descriptor_no_audio source; | 
 |     struct usb_ss_ep_comp_descriptor source_comp; | 
 |     struct usb_endpoint_descriptor_no_audio sink; | 
 |     struct usb_ss_ep_comp_descriptor sink_comp; | 
 | } __attribute__((packed)); | 
 |  | 
 | struct desc_v1 { | 
 |     struct usb_functionfs_descs_head_v1 { | 
 |         __le32 magic; | 
 |         __le32 length; | 
 |         __le32 fs_count; | 
 |         __le32 hs_count; | 
 |     } __attribute__((packed)) header; | 
 |     struct func_desc fs_descs, hs_descs; | 
 | } __attribute__((packed)); | 
 |  | 
 | struct desc_v2 { | 
 |     struct usb_functionfs_descs_head_v2 header; | 
 |     // The rest of the structure depends on the flags in the header. | 
 |     __le32 fs_count; | 
 |     __le32 hs_count; | 
 |     __le32 ss_count; | 
 |     struct func_desc fs_descs, hs_descs; | 
 |     struct ss_func_desc ss_descs; | 
 | } __attribute__((packed)); | 
 |  | 
 | static struct func_desc fs_descriptors = { | 
 |     .intf = { | 
 |         .bLength = sizeof(fs_descriptors.intf), | 
 |         .bDescriptorType = USB_DT_INTERFACE, | 
 |         .bInterfaceNumber = 0, | 
 |         .bNumEndpoints = 2, | 
 |         .bInterfaceClass = ADB_CLASS, | 
 |         .bInterfaceSubClass = ADB_SUBCLASS, | 
 |         .bInterfaceProtocol = ADB_PROTOCOL, | 
 |         .iInterface = 1, /* first string from the provided table */ | 
 |     }, | 
 |     .source = { | 
 |         .bLength = sizeof(fs_descriptors.source), | 
 |         .bDescriptorType = USB_DT_ENDPOINT, | 
 |         .bEndpointAddress = 1 | USB_DIR_OUT, | 
 |         .bmAttributes = USB_ENDPOINT_XFER_BULK, | 
 |         .wMaxPacketSize = MAX_PACKET_SIZE_FS, | 
 |     }, | 
 |     .sink = { | 
 |         .bLength = sizeof(fs_descriptors.sink), | 
 |         .bDescriptorType = USB_DT_ENDPOINT, | 
 |         .bEndpointAddress = 2 | USB_DIR_IN, | 
 |         .bmAttributes = USB_ENDPOINT_XFER_BULK, | 
 |         .wMaxPacketSize = MAX_PACKET_SIZE_FS, | 
 |     }, | 
 | }; | 
 |  | 
 | static struct func_desc hs_descriptors = { | 
 |     .intf = { | 
 |         .bLength = sizeof(hs_descriptors.intf), | 
 |         .bDescriptorType = USB_DT_INTERFACE, | 
 |         .bInterfaceNumber = 0, | 
 |         .bNumEndpoints = 2, | 
 |         .bInterfaceClass = ADB_CLASS, | 
 |         .bInterfaceSubClass = ADB_SUBCLASS, | 
 |         .bInterfaceProtocol = ADB_PROTOCOL, | 
 |         .iInterface = 1, /* first string from the provided table */ | 
 |     }, | 
 |     .source = { | 
 |         .bLength = sizeof(hs_descriptors.source), | 
 |         .bDescriptorType = USB_DT_ENDPOINT, | 
 |         .bEndpointAddress = 1 | USB_DIR_OUT, | 
 |         .bmAttributes = USB_ENDPOINT_XFER_BULK, | 
 |         .wMaxPacketSize = MAX_PACKET_SIZE_HS, | 
 |     }, | 
 |     .sink = { | 
 |         .bLength = sizeof(hs_descriptors.sink), | 
 |         .bDescriptorType = USB_DT_ENDPOINT, | 
 |         .bEndpointAddress = 2 | USB_DIR_IN, | 
 |         .bmAttributes = USB_ENDPOINT_XFER_BULK, | 
 |         .wMaxPacketSize = MAX_PACKET_SIZE_HS, | 
 |     }, | 
 | }; | 
 |  | 
 | static struct ss_func_desc ss_descriptors = { | 
 |     .intf = { | 
 |         .bLength = sizeof(ss_descriptors.intf), | 
 |         .bDescriptorType = USB_DT_INTERFACE, | 
 |         .bInterfaceNumber = 0, | 
 |         .bNumEndpoints = 2, | 
 |         .bInterfaceClass = ADB_CLASS, | 
 |         .bInterfaceSubClass = ADB_SUBCLASS, | 
 |         .bInterfaceProtocol = ADB_PROTOCOL, | 
 |         .iInterface = 1, /* first string from the provided table */ | 
 |     }, | 
 |     .source = { | 
 |         .bLength = sizeof(ss_descriptors.source), | 
 |         .bDescriptorType = USB_DT_ENDPOINT, | 
 |         .bEndpointAddress = 1 | USB_DIR_OUT, | 
 |         .bmAttributes = USB_ENDPOINT_XFER_BULK, | 
 |         .wMaxPacketSize = MAX_PACKET_SIZE_SS, | 
 |     }, | 
 |     .source_comp = { | 
 |         .bLength = sizeof(ss_descriptors.source_comp), | 
 |         .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, | 
 |     }, | 
 |     .sink = { | 
 |         .bLength = sizeof(ss_descriptors.sink), | 
 |         .bDescriptorType = USB_DT_ENDPOINT, | 
 |         .bEndpointAddress = 2 | USB_DIR_IN, | 
 |         .bmAttributes = USB_ENDPOINT_XFER_BULK, | 
 |         .wMaxPacketSize = MAX_PACKET_SIZE_SS, | 
 |     }, | 
 |     .sink_comp = { | 
 |         .bLength = sizeof(ss_descriptors.sink_comp), | 
 |         .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, | 
 |     }, | 
 | }; | 
 |  | 
 | #define STR_INTERFACE_ "ADB Interface" | 
 |  | 
 | static const struct { | 
 |     struct usb_functionfs_strings_head header; | 
 |     struct { | 
 |         __le16 code; | 
 |         const char str1[sizeof(STR_INTERFACE_)]; | 
 |     } __attribute__((packed)) lang0; | 
 | } __attribute__((packed)) strings = { | 
 |     .header = { | 
 |         .magic = cpu_to_le32(FUNCTIONFS_STRINGS_MAGIC), | 
 |         .length = cpu_to_le32(sizeof(strings)), | 
 |         .str_count = cpu_to_le32(1), | 
 |         .lang_count = cpu_to_le32(1), | 
 |     }, | 
 |     .lang0 = { | 
 |         cpu_to_le16(0x0409), /* en-us */ | 
 |         STR_INTERFACE_, | 
 |     }, | 
 | }; | 
 |  | 
 |  | 
 |  | 
 | static void *usb_adb_open_thread(void *x) | 
 | { | 
 |     struct usb_handle *usb = (struct usb_handle *)x; | 
 |     int fd; | 
 |  | 
 |     adb_thread_setname("usb open"); | 
 |  | 
 |     while (true) { | 
 |         // wait until the USB device needs opening | 
 |         adb_mutex_lock(&usb->lock); | 
 |         while (usb->fd != -1) | 
 |             adb_cond_wait(&usb->notify, &usb->lock); | 
 |         adb_mutex_unlock(&usb->lock); | 
 |  | 
 |         D("[ usb_thread - opening device ]"); | 
 |         do { | 
 |             /* XXX use inotify? */ | 
 |             fd = unix_open("/dev/android_adb", O_RDWR); | 
 |             if (fd < 0) { | 
 |                 // to support older kernels | 
 |                 fd = unix_open("/dev/android", O_RDWR); | 
 |             } | 
 |             if (fd < 0) { | 
 |                 adb_sleep_ms(1000); | 
 |             } | 
 |         } while (fd < 0); | 
 |         D("[ opening device succeeded ]"); | 
 |  | 
 |         close_on_exec(fd); | 
 |         usb->fd = fd; | 
 |  | 
 |         D("[ usb_thread - registering device ]"); | 
 |         register_usb_transport(usb, 0, 0, 1); | 
 |     } | 
 |  | 
 |     // never gets here | 
 |     return 0; | 
 | } | 
 |  | 
 | static int usb_adb_write(usb_handle *h, const void *data, int len) | 
 | { | 
 |     int n; | 
 |  | 
 |     D("about to write (fd=%d, len=%d)", h->fd, len); | 
 |     n = unix_write(h->fd, data, len); | 
 |     if(n != len) { | 
 |         D("ERROR: fd = %d, n = %d, errno = %d (%s)", | 
 |             h->fd, n, errno, strerror(errno)); | 
 |         return -1; | 
 |     } | 
 |     D("[ done fd=%d ]", h->fd); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int usb_adb_read(usb_handle *h, void *data, int len) | 
 | { | 
 |     D("about to read (fd=%d, len=%d)", h->fd, len); | 
 |     while (len > 0) { | 
 |         // The kernel implementation of adb_read in f_adb.c doesn't support | 
 |         // reads larger then 4096 bytes. Read the data in 4096 byte chunks to | 
 |         // avoid the issue. (The ffs implementation doesn't have this limit.) | 
 |         int bytes_to_read = len < 4096 ? len : 4096; | 
 |         int n = unix_read(h->fd, data, bytes_to_read); | 
 |         if (n != bytes_to_read) { | 
 |             D("ERROR: fd = %d, n = %d, errno = %d (%s)", | 
 |                 h->fd, n, errno, strerror(errno)); | 
 |             return -1; | 
 |         } | 
 |         len -= n; | 
 |         data = ((char*)data) + n; | 
 |     } | 
 |     D("[ done fd=%d ]", h->fd); | 
 |     return 0; | 
 | } | 
 |  | 
 | static void usb_adb_kick(usb_handle *h) | 
 | { | 
 |     D("usb_kick"); | 
 |     adb_mutex_lock(&h->lock); | 
 |     unix_close(h->fd); | 
 |     h->fd = -1; | 
 |  | 
 |     // notify usb_adb_open_thread that we are disconnected | 
 |     adb_cond_signal(&h->notify); | 
 |     adb_mutex_unlock(&h->lock); | 
 | } | 
 |  | 
 | static void usb_adb_init() | 
 | { | 
 |     usb_handle* h = reinterpret_cast<usb_handle*>(calloc(1, sizeof(usb_handle))); | 
 |     if (h == nullptr) fatal("couldn't allocate usb_handle"); | 
 |  | 
 |     h->write = usb_adb_write; | 
 |     h->read = usb_adb_read; | 
 |     h->kick = usb_adb_kick; | 
 |     h->fd = -1; | 
 |  | 
 |     adb_cond_init(&h->notify, 0); | 
 |     adb_mutex_init(&h->lock, 0); | 
 |  | 
 |     // Open the file /dev/android_adb_enable to trigger | 
 |     // the enabling of the adb USB function in the kernel. | 
 |     // We never touch this file again - just leave it open | 
 |     // indefinitely so the kernel will know when we are running | 
 |     // and when we are not. | 
 |     int fd = unix_open("/dev/android_adb_enable", O_RDWR); | 
 |     if (fd < 0) { | 
 |        D("failed to open /dev/android_adb_enable"); | 
 |     } else { | 
 |         close_on_exec(fd); | 
 |     } | 
 |  | 
 |     D("[ usb_init - starting thread ]"); | 
 |     if (!adb_thread_create(usb_adb_open_thread, h)) { | 
 |         fatal_errno("cannot create usb thread"); | 
 |     } | 
 | } | 
 |  | 
 |  | 
 | static void init_functionfs(struct usb_handle *h) | 
 | { | 
 |     ssize_t ret; | 
 |     struct desc_v1 v1_descriptor; | 
 |     struct desc_v2 v2_descriptor; | 
 |  | 
 |     v2_descriptor.header.magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC_V2); | 
 |     v2_descriptor.header.length = cpu_to_le32(sizeof(v2_descriptor)); | 
 |     v2_descriptor.header.flags = FUNCTIONFS_HAS_FS_DESC | FUNCTIONFS_HAS_HS_DESC | | 
 |                                  FUNCTIONFS_HAS_SS_DESC; | 
 |     v2_descriptor.fs_count = 3; | 
 |     v2_descriptor.hs_count = 3; | 
 |     v2_descriptor.ss_count = 5; | 
 |     v2_descriptor.fs_descs = fs_descriptors; | 
 |     v2_descriptor.hs_descs = hs_descriptors; | 
 |     v2_descriptor.ss_descs = ss_descriptors; | 
 |  | 
 |     if (h->control < 0) { // might have already done this before | 
 |         D("OPENING %s", USB_FFS_ADB_EP0); | 
 |         h->control = adb_open(USB_FFS_ADB_EP0, O_RDWR); | 
 |         if (h->control < 0) { | 
 |             D("[ %s: cannot open control endpoint: errno=%d]", USB_FFS_ADB_EP0, errno); | 
 |             goto err; | 
 |         } | 
 |  | 
 |         ret = adb_write(h->control, &v2_descriptor, sizeof(v2_descriptor)); | 
 |         if (ret < 0) { | 
 |             v1_descriptor.header.magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC); | 
 |             v1_descriptor.header.length = cpu_to_le32(sizeof(v1_descriptor)); | 
 |             v1_descriptor.header.fs_count = 3; | 
 |             v1_descriptor.header.hs_count = 3; | 
 |             v1_descriptor.fs_descs = fs_descriptors; | 
 |             v1_descriptor.hs_descs = hs_descriptors; | 
 |             D("[ %s: Switching to V1_descriptor format errno=%d ]", USB_FFS_ADB_EP0, errno); | 
 |             ret = adb_write(h->control, &v1_descriptor, sizeof(v1_descriptor)); | 
 |             if (ret < 0) { | 
 |                 D("[ %s: write descriptors failed: errno=%d ]", USB_FFS_ADB_EP0, errno); | 
 |                 goto err; | 
 |             } | 
 |         } | 
 |  | 
 |         ret = adb_write(h->control, &strings, sizeof(strings)); | 
 |         if (ret < 0) { | 
 |             D("[ %s: writing strings failed: errno=%d]", USB_FFS_ADB_EP0, errno); | 
 |             goto err; | 
 |         } | 
 |     } | 
 |  | 
 |     h->bulk_out = adb_open(USB_FFS_ADB_OUT, O_RDWR); | 
 |     if (h->bulk_out < 0) { | 
 |         D("[ %s: cannot open bulk-out ep: errno=%d ]", USB_FFS_ADB_OUT, errno); | 
 |         goto err; | 
 |     } | 
 |  | 
 |     h->bulk_in = adb_open(USB_FFS_ADB_IN, O_RDWR); | 
 |     if (h->bulk_in < 0) { | 
 |         D("[ %s: cannot open bulk-in ep: errno=%d ]", USB_FFS_ADB_IN, errno); | 
 |         goto err; | 
 |     } | 
 |  | 
 |     return; | 
 |  | 
 | err: | 
 |     if (h->bulk_in > 0) { | 
 |         adb_close(h->bulk_in); | 
 |         h->bulk_in = -1; | 
 |     } | 
 |     if (h->bulk_out > 0) { | 
 |         adb_close(h->bulk_out); | 
 |         h->bulk_out = -1; | 
 |     } | 
 |     if (h->control > 0) { | 
 |         adb_close(h->control); | 
 |         h->control = -1; | 
 |     } | 
 |     return; | 
 | } | 
 |  | 
 | static void *usb_ffs_open_thread(void *x) | 
 | { | 
 |     struct usb_handle *usb = (struct usb_handle *)x; | 
 |  | 
 |     adb_thread_setname("usb ffs open"); | 
 |  | 
 |     while (true) { | 
 |         // wait until the USB device needs opening | 
 |         adb_mutex_lock(&usb->lock); | 
 |         while (usb->control != -1 && usb->bulk_in != -1 && usb->bulk_out != -1) | 
 |             adb_cond_wait(&usb->notify, &usb->lock); | 
 |         adb_mutex_unlock(&usb->lock); | 
 |  | 
 |         while (true) { | 
 |             init_functionfs(usb); | 
 |  | 
 |             if (usb->control >= 0 && usb->bulk_in >= 0 && usb->bulk_out >= 0) | 
 |                 break; | 
 |  | 
 |             adb_sleep_ms(1000); | 
 |         } | 
 |         property_set("sys.usb.ffs.ready", "1"); | 
 |  | 
 |         D("[ usb_thread - registering device ]"); | 
 |         register_usb_transport(usb, 0, 0, 1); | 
 |     } | 
 |  | 
 |     // never gets here | 
 |     return 0; | 
 | } | 
 |  | 
 | static int bulk_write(int bulk_in, const uint8_t* buf, size_t length) | 
 | { | 
 |     size_t count = 0; | 
 |  | 
 |     while (count < length) { | 
 |         int ret = adb_write(bulk_in, buf + count, length - count); | 
 |         if (ret < 0) return -1; | 
 |         count += ret; | 
 |     } | 
 |  | 
 |     D("[ bulk_write done fd=%d ]", bulk_in); | 
 |     return count; | 
 | } | 
 |  | 
 | static int usb_ffs_write(usb_handle* h, const void* data, int len) | 
 | { | 
 |     D("about to write (fd=%d, len=%d)", h->bulk_in, len); | 
 |     int n = bulk_write(h->bulk_in, reinterpret_cast<const uint8_t*>(data), len); | 
 |     if (n != len) { | 
 |         D("ERROR: fd = %d, n = %d: %s", h->bulk_in, n, strerror(errno)); | 
 |         return -1; | 
 |     } | 
 |     D("[ done fd=%d ]", h->bulk_in); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int bulk_read(int bulk_out, uint8_t* buf, size_t length) | 
 | { | 
 |     size_t count = 0; | 
 |  | 
 |     while (count < length) { | 
 |         int ret = adb_read(bulk_out, buf + count, length - count); | 
 |         if (ret < 0) { | 
 |             D("[ bulk_read failed fd=%d length=%zu count=%zu ]", bulk_out, length, count); | 
 |             return -1; | 
 |         } | 
 |         count += ret; | 
 |     } | 
 |  | 
 |     return count; | 
 | } | 
 |  | 
 | static int usb_ffs_read(usb_handle* h, void* data, int len) | 
 | { | 
 |     D("about to read (fd=%d, len=%d)", h->bulk_out, len); | 
 |     int n = bulk_read(h->bulk_out, reinterpret_cast<uint8_t*>(data), len); | 
 |     if (n != len) { | 
 |         D("ERROR: fd = %d, n = %d: %s", h->bulk_out, n, strerror(errno)); | 
 |         return -1; | 
 |     } | 
 |     D("[ done fd=%d ]", h->bulk_out); | 
 |     return 0; | 
 | } | 
 |  | 
 | static void usb_ffs_kick(usb_handle *h) | 
 | { | 
 |     int err; | 
 |  | 
 |     err = ioctl(h->bulk_in, FUNCTIONFS_CLEAR_HALT); | 
 |     if (err < 0) { | 
 |         D("[ kick: source (fd=%d) clear halt failed (%d) ]", h->bulk_in, errno); | 
 |     } | 
 |  | 
 |     err = ioctl(h->bulk_out, FUNCTIONFS_CLEAR_HALT); | 
 |     if (err < 0) { | 
 |         D("[ kick: sink (fd=%d) clear halt failed (%d) ]", h->bulk_out, errno); | 
 |     } | 
 |  | 
 |     adb_mutex_lock(&h->lock); | 
 |  | 
 |     // don't close ep0 here, since we may not need to reinitialize it with | 
 |     // the same descriptors again. if however ep1/ep2 fail to re-open in | 
 |     // init_functionfs, only then would we close and open ep0 again. | 
 |     adb_close(h->bulk_out); | 
 |     adb_close(h->bulk_in); | 
 |     h->bulk_out = h->bulk_in = -1; | 
 |  | 
 |     // notify usb_ffs_open_thread that we are disconnected | 
 |     adb_cond_signal(&h->notify); | 
 |     adb_mutex_unlock(&h->lock); | 
 | } | 
 |  | 
 | static void usb_ffs_init() | 
 | { | 
 |     D("[ usb_init - using FunctionFS ]"); | 
 |  | 
 |     usb_handle* h = reinterpret_cast<usb_handle*>(calloc(1, sizeof(usb_handle))); | 
 |     if (h == nullptr) fatal("couldn't allocate usb_handle"); | 
 |  | 
 |     h->write = usb_ffs_write; | 
 |     h->read = usb_ffs_read; | 
 |     h->kick = usb_ffs_kick; | 
 |     h->control = -1; | 
 |     h->bulk_out = -1; | 
 |     h->bulk_out = -1; | 
 |  | 
 |     adb_cond_init(&h->notify, 0); | 
 |     adb_mutex_init(&h->lock, 0); | 
 |  | 
 |     D("[ usb_init - starting thread ]"); | 
 |     if (!adb_thread_create(usb_ffs_open_thread, h)) { | 
 |         fatal_errno("[ cannot create usb thread ]\n"); | 
 |     } | 
 | } | 
 |  | 
 | void usb_init() | 
 | { | 
 |     if (access(USB_FFS_ADB_EP0, F_OK) == 0) | 
 |         usb_ffs_init(); | 
 |     else | 
 |         usb_adb_init(); | 
 | } | 
 |  | 
 | int usb_write(usb_handle *h, const void *data, int len) | 
 | { | 
 |     return h->write(h, data, len); | 
 | } | 
 |  | 
 | int usb_read(usb_handle *h, void *data, int len) | 
 | { | 
 |     return h->read(h, data, len); | 
 | } | 
 | int usb_close(usb_handle *h) | 
 | { | 
 |     return 0; | 
 | } | 
 |  | 
 | void usb_kick(usb_handle *h) | 
 | { | 
 |     h->kick(h); | 
 | } |