| /****************************************************************************** |
| * |
| * Copyright 2006-2013 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| #include <string.h> |
| |
| #include "avrc_api.h" |
| #include "avrc_defs.h" |
| #include "avrc_int.h" |
| #include "bt_common.h" |
| |
| /***************************************************************************** |
| * Global data |
| ****************************************************************************/ |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_next_cmd |
| * |
| * Description This function builds the Request Continue or Abort command. |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_next_cmd(tAVRC_NEXT_CMD* p_cmd, BT_HDR* p_pkt) { |
| uint8_t *p_data, *p_start; |
| |
| AVRC_TRACE_API("avrc_bld_next_cmd"); |
| |
| /* get the existing length, if any, and also the num attributes */ |
| p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| p_data = p_start + 2; /* pdu + rsvd */ |
| |
| /* add fixed lenth 1 - pdu_id (1) */ |
| UINT16_TO_BE_STREAM(p_data, 1); |
| UINT8_TO_BE_STREAM(p_data, p_cmd->target_pdu); |
| p_pkt->len = (p_data - p_start); |
| |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /***************************************************************************** |
| * the following commands are introduced in AVRCP 1.4 |
| ****************************************************************************/ |
| |
| #if (AVRC_ADV_CTRL_INCLUDED == TRUE) |
| /******************************************************************************* |
| * |
| * Function avrc_bld_set_abs_volume_cmd |
| * |
| * Description This function builds the Set Absolute Volume command. |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_set_abs_volume_cmd(tAVRC_SET_VOLUME_CMD* p_cmd, |
| BT_HDR* p_pkt) { |
| uint8_t *p_data, *p_start; |
| |
| AVRC_TRACE_API("avrc_bld_set_abs_volume_cmd"); |
| /* get the existing length, if any, and also the num attributes */ |
| p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| p_data = p_start + 2; /* pdu + rsvd */ |
| /* add fixed lenth 1 - volume (1) */ |
| UINT16_TO_BE_STREAM(p_data, 1); |
| UINT8_TO_BE_STREAM(p_data, (AVRC_MAX_VOLUME & p_cmd->volume)); |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_register_notifn |
| * |
| * Description This function builds the register notification. |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_register_notifn(BT_HDR* p_pkt, uint8_t event_id, |
| uint32_t event_param) { |
| uint8_t *p_data, *p_start; |
| |
| AVRC_TRACE_API("avrc_bld_register_notifn"); |
| /* get the existing length, if any, and also the num attributes */ |
| // Set the notify value |
| p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| p_data = p_start + 2; /* pdu + rsvd */ |
| /* add fixed length 5 -*/ |
| UINT16_TO_BE_STREAM(p_data, 5); |
| UINT8_TO_BE_STREAM(p_data, event_id); |
| UINT32_TO_BE_STREAM(p_data, event_param); |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| #endif |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_get_capability_cmd |
| * |
| * Description This function builds the get capability command. |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_get_capability_cmd(BT_HDR* p_pkt, uint8_t cap_id) { |
| AVRC_TRACE_API("avrc_bld_get_capability_cmd"); |
| uint8_t* p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| uint8_t* p_data = p_start + 2; /* pdu + rsvd */ |
| /* add fixed length 1 -*/ |
| UINT16_TO_BE_STREAM(p_data, 1); |
| UINT8_TO_BE_STREAM(p_data, cap_id); |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_list_player_app_attr_cmd |
| * |
| * Description This function builds the list player app attrib command. |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_list_player_app_attr_cmd(BT_HDR* p_pkt) { |
| AVRC_TRACE_API("avrc_bld_list_player_app_attr_cmd"); |
| uint8_t* p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| uint8_t* p_data = p_start + 2; /* pdu + rsvd */ |
| /* add fixed length 1 -*/ |
| UINT16_TO_BE_STREAM(p_data, 0); |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_list_player_app_values_cmd |
| * |
| * Description This function builds the list player app values command. |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_list_player_app_values_cmd(BT_HDR* p_pkt, |
| uint8_t attrib_id) { |
| AVRC_TRACE_API("avrc_bld_list_player_app_values_cmd"); |
| uint8_t* p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| uint8_t* p_data = p_start + 2; /* pdu + rsvd */ |
| /* add fixed length 1 -*/ |
| UINT16_TO_BE_STREAM(p_data, 1); |
| UINT8_TO_BE_STREAM(p_data, attrib_id); |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_get_current_player_app_values_cmd |
| * |
| * Description This function builds the get current player app setting |
| * values command. |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_get_current_player_app_values_cmd( |
| BT_HDR* p_pkt, uint8_t num_attrib_id, uint8_t* attrib_ids) { |
| AVRC_TRACE_API("avrc_bld_get_current_player_app_values_cmd"); |
| uint8_t* p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| uint8_t* p_data = p_start + 2; /* pdu + rsvd */ |
| uint8_t param_len = |
| num_attrib_id + 1; // 1 additional to hold num attributes feild |
| /* add length -*/ |
| UINT16_TO_BE_STREAM(p_data, param_len); |
| UINT8_TO_BE_STREAM(p_data, num_attrib_id); |
| for (int count = 0; count < num_attrib_id; count++) { |
| UINT8_TO_BE_STREAM(p_data, attrib_ids[count]); |
| } |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_set_current_player_app_values_cmd |
| * |
| * Description This function builds the set current player app setting |
| * values command. |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_set_current_player_app_values_cmd( |
| BT_HDR* p_pkt, uint8_t num_attrib_id, tAVRC_APP_SETTING* p_val) { |
| AVRC_TRACE_API("avrc_bld_set_current_player_app_values_cmd"); |
| uint8_t* p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| uint8_t* p_data = p_start + 2; /* pdu + rsvd */ |
| /* we have to store attrib- value pair |
| * 1 additional to store num elements |
| */ |
| uint8_t param_len = (2 * num_attrib_id) + 1; |
| /* add length */ |
| UINT16_TO_BE_STREAM(p_data, param_len); |
| UINT8_TO_BE_STREAM(p_data, num_attrib_id); |
| for (int count = 0; count < num_attrib_id; count++) { |
| UINT8_TO_BE_STREAM(p_data, p_val[count].attr_id); |
| UINT8_TO_BE_STREAM(p_data, p_val[count].attr_val); |
| } |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_get_player_app_setting_attr_text_cmd |
| * |
| * Description This function builds the get player app setting attribute |
| * text command. |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_get_player_app_setting_attr_text_cmd( |
| BT_HDR* p_pkt, tAVRC_GET_APP_ATTR_TXT_CMD* p_cmd) { |
| AVRC_TRACE_API("%s", __func__); |
| |
| uint8_t* p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| uint8_t* p_data = p_start + 2; /* pdu + rsvd */ |
| |
| uint8_t param_len = p_cmd->num_attr + 1; |
| /* add length */ |
| UINT16_TO_BE_STREAM(p_data, param_len); |
| UINT8_TO_BE_STREAM(p_data, p_cmd->num_attr); |
| for (int count = 0; count < p_cmd->num_attr; count++) { |
| UINT8_TO_BE_STREAM(p_data, p_cmd->attrs[count]); |
| } |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_get_player_app_setting_value_text_cmd |
| * |
| * Description This function builds the get player app setting value |
| * text command. |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_get_player_app_setting_value_text_cmd( |
| BT_HDR* p_pkt, tAVRC_GET_APP_VAL_TXT_CMD* p_cmd) { |
| AVRC_TRACE_API("%s", __func__); |
| |
| uint8_t* p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| uint8_t* p_data = p_start + 2; /* pdu + rsvd */ |
| |
| uint8_t param_len = p_cmd->num_val + 1; |
| /* add length */ |
| UINT16_TO_BE_STREAM(p_data, param_len); |
| UINT8_TO_BE_STREAM(p_data, p_cmd->num_val); |
| for (int count = 0; count < p_cmd->num_val; count++) { |
| UINT8_TO_BE_STREAM(p_data, p_cmd->vals[count]); |
| } |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_get_element_attr_cmd |
| * |
| * Description This function builds the get element attribute command. |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_get_element_attr_cmd(BT_HDR* p_pkt, |
| uint8_t num_attrib, |
| uint32_t* attrib_ids) { |
| AVRC_TRACE_API("avrc_bld_get_element_attr_cmd"); |
| uint8_t* p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| uint8_t* p_data = p_start + 2; /* pdu + rsvd */ |
| /* we have to store attrib- value pair |
| * 1 additional to store num elements |
| */ |
| uint8_t param_len = (4 * num_attrib) + 9; |
| /* add length */ |
| UINT16_TO_BE_STREAM(p_data, param_len); |
| /* 8 bytes of identifier as 0 (playing)*/ |
| UINT32_TO_BE_STREAM(p_data, 0); |
| UINT32_TO_BE_STREAM(p_data, 0); |
| UINT8_TO_BE_STREAM(p_data, num_attrib); |
| for (int count = 0; count < num_attrib; count++) { |
| UINT32_TO_BE_STREAM(p_data, attrib_ids[count]); |
| } |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_play_item_cmd |
| * |
| * Description This function builds the play item cmd |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_play_item_cmd(BT_HDR* p_pkt, uint8_t scope, |
| uint8_t* uid, uint16_t uid_counter) { |
| AVRC_TRACE_API("avrc_bld_get_element_attr_cmd"); |
| uint8_t* p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| uint8_t* p_data = p_start + 2; /* pdu + rsvd */ |
| /* add fixed length 11 */ |
| UINT16_TO_BE_STREAM(p_data, 0xb); |
| /* Add scope */ |
| UINT8_TO_BE_STREAM(p_data, scope); |
| /* Add UID */ |
| ARRAY_TO_BE_STREAM(p_data, uid, AVRC_UID_SIZE); |
| /* Add UID Counter */ |
| UINT16_TO_BE_STREAM(p_data, uid_counter); |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_get_play_status_cmd |
| * |
| * Description This function builds the get play status command. |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_get_play_status_cmd(BT_HDR* p_pkt) { |
| AVRC_TRACE_API("avrc_bld_list_player_app_attr_cmd"); |
| uint8_t* p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| uint8_t* p_data = p_start + 2; /* pdu + rsvd */ |
| /* add fixed length 0 -*/ |
| UINT16_TO_BE_STREAM(p_data, 0); |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_get_folder_items_cmd |
| * |
| * Description This function builds the get folder items cmd. |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_get_folder_items_cmd(BT_HDR* p_pkt, |
| const tAVRC_GET_ITEMS_CMD* cmd) { |
| AVRC_TRACE_API( |
| "avrc_bld_get_folder_items_cmd scope %d, start_item %d, end_item %d", |
| cmd->scope, cmd->start_item, cmd->end_item); |
| uint8_t* p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| /* This is where the PDU specific for AVRC starts |
| * AVRCP Spec 1.4 section 22.19 */ |
| uint8_t* p_data = p_start + 1; /* pdu */ |
| |
| /* To get the list of all media players we simply need to use the predefined |
| * PDU mentioned in above spec. */ |
| /* scope (1) + st item (4) + end item (4) + attr (1) */ |
| UINT16_TO_BE_STREAM(p_data, 10); |
| UINT8_TO_BE_STREAM(p_data, cmd->scope); /* scope (1bytes) */ |
| UINT32_TO_BE_STREAM(p_data, cmd->start_item); /* start item (4bytes) */ |
| UINT32_TO_BE_STREAM(p_data, cmd->end_item); /* end item (4bytes) */ |
| UINT8_TO_BE_STREAM(p_data, 0); /* attribute count = 0 (1bytes) */ |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_change_folder_cmd |
| * |
| * Description This function builds the change folder command |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_change_folder_cmd(BT_HDR* p_pkt, |
| const tAVRC_CHG_PATH_CMD* cmd) { |
| AVRC_TRACE_API("avrc_bld_change_folder_cmd"); |
| uint8_t* p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| /* This is where the PDU specific for AVRC starts |
| * AVRCP Spec 1.4 section 22.19 */ |
| uint8_t* p_data = p_start + 1; /* pdu */ |
| |
| /* To change folder we need to provide the following: |
| * UID Counter (2) + Direction (1) + UID (8) = 11bytes |
| */ |
| UINT16_TO_BE_STREAM(p_data, 11); |
| UINT16_TO_BE_STREAM(p_data, cmd->uid_counter); |
| UINT8_TO_BE_STREAM(p_data, cmd->direction); |
| ARRAY_TO_BE_STREAM(p_data, cmd->folder_uid, AVRC_UID_SIZE); |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_set_browsed_player_cmd |
| * |
| * Description This function builds the set browsed player cmd. |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_set_browsed_player_cmd( |
| BT_HDR* p_pkt, const tAVRC_SET_BR_PLAYER_CMD* cmd) { |
| AVRC_TRACE_API("%s", __func__); |
| uint8_t* p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| /* This is where the PDU specific for AVRC starts |
| * AVRCP Spec 1.4 section 22.19 */ |
| uint8_t* p_data = p_start + 1; /* pdu */ |
| |
| /* To change browsed player the following is the total length: |
| * Player ID (2) |
| */ |
| UINT16_TO_BE_STREAM(p_data, 2); /* fixed length */ |
| UINT16_TO_BE_STREAM(p_data, cmd->player_id); |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_set_addressed_player_cmd |
| * |
| * Description This function builds the set addressed player cmd. |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| static tAVRC_STS avrc_bld_set_addressed_player_cmd( |
| BT_HDR* p_pkt, const tAVRC_SET_ADDR_PLAYER_CMD* cmd) { |
| AVRC_TRACE_API("%s", __func__); |
| /* get the existing length, if any, and also the num attributes */ |
| uint8_t* p_start = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| uint8_t* p_data = p_start + 2; /* pdu + rsvd */ |
| |
| /* To change addressed player the following is the total length: |
| * Player ID (2) |
| */ |
| UINT16_TO_BE_STREAM(p_data, 2); /* fixed length */ |
| UINT16_TO_BE_STREAM(p_data, cmd->player_id); |
| p_pkt->len = (p_data - p_start); |
| return AVRC_STS_NO_ERROR; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function avrc_bld_init_cmd_buffer |
| * |
| * Description This function initializes the command buffer based on PDU |
| * |
| * Returns NULL, if no GKI buffer or failure to build the message. |
| * Otherwise, the GKI buffer that contains the initialized |
| * message. |
| * |
| ******************************************************************************/ |
| static BT_HDR* avrc_bld_init_cmd_buffer(tAVRC_COMMAND* p_cmd) { |
| uint16_t chnl = AVCT_DATA_CTRL; |
| uint8_t opcode = avrc_opcode_from_pdu(p_cmd->pdu); |
| AVRC_TRACE_API("avrc_bld_init_cmd_buffer: pdu=%x, opcode=%x", p_cmd->pdu, |
| opcode); |
| |
| uint16_t offset = 0; |
| switch (opcode) { |
| case AVRC_OP_BROWSE: |
| chnl = AVCT_DATA_BROWSE; |
| offset = AVCT_BROWSE_OFFSET; |
| break; |
| |
| case AVRC_OP_PASS_THRU: |
| offset = AVRC_MSG_PASS_THRU_OFFSET; |
| break; |
| |
| case AVRC_OP_VENDOR: |
| offset = AVRC_MSG_VENDOR_OFFSET; |
| break; |
| } |
| |
| /* allocate and initialize the buffer */ |
| BT_HDR* p_pkt = (BT_HDR*)osi_malloc(AVRC_META_CMD_BUF_SIZE); |
| uint8_t *p_data, *p_start; |
| |
| p_pkt->layer_specific = chnl; |
| p_pkt->event = opcode; |
| p_pkt->offset = offset; |
| p_data = (uint8_t*)(p_pkt + 1) + p_pkt->offset; |
| p_start = p_data; |
| |
| /* pass thru - group navigation - has a two byte op_id, so dont do it here */ |
| if (opcode != AVRC_OP_PASS_THRU) *p_data++ = p_cmd->pdu; |
| |
| switch (opcode) { |
| case AVRC_OP_VENDOR: |
| /* reserved 0, packet_type 0 */ |
| UINT8_TO_BE_STREAM(p_data, 0); |
| /* continue to the next "case to add length */ |
| /* add fixed lenth - 0 */ |
| UINT16_TO_BE_STREAM(p_data, 0); |
| break; |
| } |
| |
| p_pkt->len = (p_data - p_start); |
| p_cmd->cmd.opcode = opcode; |
| |
| return p_pkt; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function AVRC_BldCommand |
| * |
| * Description This function builds the given AVRCP command to the given |
| * GKI buffer |
| * |
| * Returns AVRC_STS_NO_ERROR, if the command is built successfully |
| * Otherwise, the error code. |
| * |
| ******************************************************************************/ |
| tAVRC_STS AVRC_BldCommand(tAVRC_COMMAND* p_cmd, BT_HDR** pp_pkt) { |
| tAVRC_STS status = AVRC_STS_BAD_PARAM; |
| bool alloc = false; |
| AVRC_TRACE_API("AVRC_BldCommand: pdu=%x status=%x", p_cmd->cmd.pdu, |
| p_cmd->cmd.status); |
| if (!p_cmd || !pp_pkt) { |
| AVRC_TRACE_API( |
| "AVRC_BldCommand. Invalid parameters passed. p_cmd=%p, pp_pkt=%p", |
| p_cmd, pp_pkt); |
| return AVRC_STS_BAD_PARAM; |
| } |
| |
| if (*pp_pkt == NULL) { |
| *pp_pkt = avrc_bld_init_cmd_buffer(p_cmd); |
| if (*pp_pkt == NULL) { |
| AVRC_TRACE_API("AVRC_BldCommand: Failed to initialize command buffer"); |
| return AVRC_STS_INTERNAL_ERR; |
| } |
| alloc = true; |
| } |
| status = AVRC_STS_NO_ERROR; |
| BT_HDR* p_pkt = *pp_pkt; |
| |
| switch (p_cmd->pdu) { |
| case AVRC_PDU_REQUEST_CONTINUATION_RSP: /* 0x40 */ |
| status = avrc_bld_next_cmd(&p_cmd->continu, p_pkt); |
| break; |
| |
| case AVRC_PDU_ABORT_CONTINUATION_RSP: /* 0x41 */ |
| status = avrc_bld_next_cmd(&p_cmd->abort, p_pkt); |
| break; |
| #if (AVRC_ADV_CTRL_INCLUDED == TRUE) |
| case AVRC_PDU_SET_ABSOLUTE_VOLUME: /* 0x50 */ |
| status = avrc_bld_set_abs_volume_cmd(&p_cmd->volume, p_pkt); |
| break; |
| #endif |
| case AVRC_PDU_REGISTER_NOTIFICATION: /* 0x31 */ |
| #if (AVRC_ADV_CTRL_INCLUDED == TRUE) |
| status = avrc_bld_register_notifn(p_pkt, p_cmd->reg_notif.event_id, |
| p_cmd->reg_notif.param); |
| #endif |
| break; |
| case AVRC_PDU_GET_CAPABILITIES: |
| status = |
| avrc_bld_get_capability_cmd(p_pkt, p_cmd->get_caps.capability_id); |
| break; |
| case AVRC_PDU_LIST_PLAYER_APP_ATTR: |
| status = avrc_bld_list_player_app_attr_cmd(p_pkt); |
| break; |
| case AVRC_PDU_LIST_PLAYER_APP_VALUES: |
| status = avrc_bld_list_player_app_values_cmd( |
| p_pkt, p_cmd->list_app_values.attr_id); |
| break; |
| case AVRC_PDU_GET_CUR_PLAYER_APP_VALUE: |
| status = avrc_bld_get_current_player_app_values_cmd( |
| p_pkt, p_cmd->get_cur_app_val.num_attr, p_cmd->get_cur_app_val.attrs); |
| break; |
| case AVRC_PDU_SET_PLAYER_APP_VALUE: |
| status = avrc_bld_set_current_player_app_values_cmd( |
| p_pkt, p_cmd->set_app_val.num_val, p_cmd->set_app_val.p_vals); |
| break; |
| case AVRC_PDU_GET_PLAYER_APP_ATTR_TEXT: |
| avrc_bld_get_player_app_setting_attr_text_cmd(p_pkt, |
| &p_cmd->get_app_attr_txt); |
| break; |
| case AVRC_PDU_GET_PLAYER_APP_VALUE_TEXT: |
| avrc_bld_get_player_app_setting_value_text_cmd(p_pkt, |
| &p_cmd->get_app_val_txt); |
| break; |
| case AVRC_PDU_GET_ELEMENT_ATTR: |
| status = avrc_bld_get_element_attr_cmd( |
| p_pkt, p_cmd->get_elem_attrs.num_attr, p_cmd->get_elem_attrs.attrs); |
| break; |
| case AVRC_PDU_PLAY_ITEM: |
| status = avrc_bld_play_item_cmd(p_pkt, p_cmd->play_item.scope, |
| p_cmd->play_item.uid, |
| p_cmd->play_item.uid_counter); |
| break; |
| case AVRC_PDU_GET_PLAY_STATUS: |
| status = avrc_bld_get_play_status_cmd(p_pkt); |
| break; |
| case AVRC_PDU_GET_FOLDER_ITEMS: |
| status = avrc_bld_get_folder_items_cmd(p_pkt, &(p_cmd->get_items)); |
| break; |
| case AVRC_PDU_CHANGE_PATH: |
| status = avrc_bld_change_folder_cmd(p_pkt, &(p_cmd->chg_path)); |
| break; |
| case AVRC_PDU_SET_BROWSED_PLAYER: |
| status = avrc_bld_set_browsed_player_cmd(p_pkt, &(p_cmd->br_player)); |
| break; |
| case AVRC_PDU_SET_ADDRESSED_PLAYER: |
| status = avrc_bld_set_addressed_player_cmd(p_pkt, &(p_cmd->addr_player)); |
| break; |
| } |
| |
| if (alloc && (status != AVRC_STS_NO_ERROR)) { |
| osi_free(p_pkt); |
| *pp_pkt = NULL; |
| } |
| AVRC_TRACE_API("AVRC_BldCommand: returning %d", status); |
| return status; |
| } |